No Quick chargue when screen enabled - LeEco Le Pro3 Questions & Answers

When i am using my phone and charguing at the same time it ccan delay more than two hours to chargue only the first 50% and more than 4 for te 100%.. i feel that the quick chargue was off when i am using... What can i do? Changue mi rom? Thanks and sorry for my english
Now --> 5.8.017S LEX720

It is a 17s bug, you have to upgrade to 18s and above.
Sent from my LEX720 using Tapatalk

Related

Touch malfunction

Friends, I was purchased an used defy from ebay. It comes with android 2.2 and also rooted. From the first day onwards i noted some freezing. First i thought it is due to rom. But then i found orientation, volume buttons and power button working properly. During that time screen display may jumb. Then i was found the problem will solve by pressing power button to lock the screen and then unlock. Then it remain working for few hours. The touch may not work during call also. Pressing power button is the only hope.
Please help.
Sorry for my bad english
Sent from my MB525 using Tapatalk 2
Hi, test to flash the right sbf for your defy. Maybe its your software.
Gesendet von meinem MB526
I am using latest sbf "sea 15" in my phone. I am from India. One more incident i found that this problem is more frequent during morning and later evening i.e during cold hours.
Sent from my MB525 using Tapatalk 2
Try limiting multi touch (no of points) to increase sensivity.
Sent from my MB526 using xda premium
I am decreased the mutitouch points from4 to 2. But fault is still there. Its happening during morning and later evening. So after heating the digitalizer using hair drair suddenly the problem solved. But it again happens later evening. So i am confused. Is it due to faulty digitalizer or anything other?
Sent from my MB525 using Tapatalk 2
I think you should try stock flash once, and if not resolved it is definitely a hardware issue
Sent from my MB526 using xda premium
Recently a similar problem happened to me. It's hardware issue. Tried several stock ROMs and nothing.
This sounds exactly like my Defy. It is rooted now but with no flashed ROM just stock 2.2.2
It has had the problem long before rooting.
If it is a hardware issue is it likely it could get worse & maybe stop working?
Is there any possible fix?
I am changed froyo kernel based wiui. Now running perfectly with gb kernel based wiui rom. No problem till now(3 weeks test).
So i think its a kernel issue for some defys. Try it and report. Hope it help u too
Sent from my MB525 using Tapatalk 2
pradeeppk said:
I am changed froyo kernel based wiui. Now running perfectly with gb kernel based wiui rom. No problem till now(3 weeks test).
So i think its a kernel issue for some defys. Try it and report. Hope it help u too
Sent from my MB525 using Tapatalk 2
Click to expand...
Click to collapse
I'll charge my Defy and give this a try... Can you help me with a link to the thread?
Sent from my LG-P350 using Tapatalk 2
Look at development forum for wiui rom and download defy + rom, gb kernel and battery fix and flash it.
Sent from my MB525 using Tapatalk 2
Quick question, how do I install 2ndInit if I can't access my screen?

Galaxy S4 GT-I9500 Battery

Hi friends,
Today I wanted to generally see what was consuming my battery and how much... But when I went into the Setting>Battery I saw......
Isn't this weird??? It's not giving any details... Can anyone plz tell me if its normal or theres something wrong...
Plz advise/help....
Thanks
Sent from my GT-I9500 using Tapatalk 4 - Hassan K. Malik
My friend what rom and kernel are you using? If so... Do you flash any modification other than rom and kernel?
HassanM said:
Hi friends,
Today I wanted to generally see what was consuming my battery and how much... But when I went into the Setting>Battery I saw......
Isn't this weird??? It's not giving any details... Can anyone plz tell me if its normal or theres something wrong...
Plz advise/help....
Thanks
Sent from my GT-I9500 using Tapatalk 4 - Hassan K. Malik
Click to expand...
Click to collapse
Happening to me too sometimes! Don't know what causing the problem, Even the CPU total timer in Android OS is 248 days! :silly: lol
wanam lite + perseus kernel

WiFi showing always no internet in OnePlus 2

i am using latest mokee release version from few days i am noticing that my notification bar continuously showing that " sign in to a Wi-Fi network" though, it is working normally but my WiFi connection is become pretty unstable is there any solution for this problem? i have tried clean flash and other ROM too but problem is still remains.
Sent from my ONE A2003 using XDA-Developers mobile app
You really should ask this in the official Mokee ROM thread instead of in the generic support-thread. I can tell as much as it works flawless under official CM13.
pitrus- said:
You really should ask this in the official Mokee ROM thread instead of in the generic support-thread. I can tell as much as it works flawless under official CM13.
Click to expand...
Click to collapse
okay thanks they have fixed today this problem i need to delete this thread
Sent from my ONE A2003 using XDA-Developers mobile app

LeMax 2 Official Indian ROM eUI 5.8.019S released !

Got the update for my phone today !
I can't post the official link because I'm a new user but it's there !
But you can use search next time because there is a thread with that information allready. No need for new one.
Sent from my Le X820 using Tapatalk
gamer009 said:
Got the update for my phone today !
I can't post the official link because I'm a new user but it's there !
Click to expand...
Click to collapse
http://107.155.56.76/222/12/30/letv...&gn=991&vrtmcd=109&buss=8888&cips=47.9.239.80
darkming said:
But you can use search next time because there is a thread with that information allready. No need for new one.
Sent from my Le X820 using Tapatalk
Click to expand...
Click to collapse
Where ? I can't find it !
http://forum.xda-developers.com/showthread.php?t=3484388
Sent from my Le X820 using Tapatalk

Miui custom kernel?

Anyone using Yuki kernel? Or Milk kernel? Or any other Miui kompatible kernel?
I'm on MiuiMix and I just want a better battery life...
Tnx guys
welder73 said:
Anyone using Yuki kernel? Or Milk kernel? Or any other Miui kompatible kernel?
I'm on MiuiMix and I just want a better battery life...
Tnx guys
Click to expand...
Click to collapse
Good question, have been searching for a good custom kernel for a while and no luck.
Yuki kernel is good, but unstable. Unfortunately, the dev doesn't have a mi 9t
sauliiin said:
Good question, have been searching for a good custom kernel for a while and no luck.
Yuki kernel is good, but unstable. Unfortunately, the dev doesn't have a mi 9t
Click to expand...
Click to collapse
I just flashed Milk kernel, I'll report when I test it a while...
Sent from my Mi 9T using XDA Labs
welder73 said:
I just flashed Milk kernel, I'll report when I test it a while...
Sent from my Mi 9T using XDA Labs
Click to expand...
Click to collapse
Me too! So far, auto brightness seems to behave a little strange. Tell me if you feel the same or find something else
welder73 said:
I just flashed Milk kernel, I'll report when I test it a while...
Sent from my Mi 9T using XDA Labs
Click to expand...
Click to collapse
Does this Milk kernel has an info page, where we can read the features and have download link?
Is here on xda?
Has wireguard kernel support?
Thank you.
gulp79 said:
Does this Milk kernel has an info page, where we can read the features and have download link?
Is here on xda?
Has wireguard kernel support?
Thank you.
Click to expand...
Click to collapse
It's on Github...
https://github.com/mishamyrt/davinci-milk-kernel/releases
Sent from my Mi 9T using XDA Labs
sauliiin said:
Me too! So far, auto brightness seems to behave a little strange. Tell me if you feel the same or find something else
Click to expand...
Click to collapse
I don't have a problem with auto brightness...
But I had a problem a soon as the phone turned on after flashing...all of the cores were on maximum!
I installed Ex Kernel Manager and then I saw the performance governor was active...
I changed it to schedutil and now the cores goes down...
Sent from my Mi 9T using XDA Labs
welder73 said:
I don't have a problem with auto brightness...
But I had a problem a soon as the phone turned on after flashing...all of the cores were on maximum!
I installed Ex Kernel Manager and then I saw the performance governor was active...
I changed it to schedutil and now the cores goes down...
Sent from my Mi 9T using XDA Labs
Click to expand...
Click to collapse
Auto brightness is OK now... Pehaps was just a placebo
Let's se about battery! Hope it's good on this kernel. So far is stable
welder73 said:
Anyone using Yuki kernel? Or Milk kernel? Or any other Miui kompatible kernel?
I'm on MiuiMix and I just want a better battery life...
Tnx guys
Click to expand...
Click to collapse
Hard since Xiaomi don't release Kernel sources often so custom are always outdated kernels, even if has more features
Pupet_Master said:
Hard since Xiaomi don't release Kernel sources often so custom are always outdated kernels, even if has more features
Click to expand...
Click to collapse
Android 10 kernel sources are released as far as I know...
Sent from my Mi 9T using XDA Labs
welder73 said:
Android 10 kernel sources are released as far as I know...
Sent from my Mi 9T using XDA Labs
Click to expand...
Click to collapse
Android 10 AOSP, MIUI far as i know, released a very generic outdated one that they don't use
I think I'll go back to android 9... if I can...
Sent from my Mi 9T using XDA Labs
Can i use vantom kernel on miui.eu last beta ? Or It si not comatible, i really Sony want ti brick my phone but i want to try a custom kernel
xdzeus said:
Can i use vantom kernel on miui.eu last beta ? Or It si not comatible, i really Sony want ti brick my phone but i want to try a custom kernel
Click to expand...
Click to collapse
I think it's for Aosp roms, not Miui...
Sent from my Mi 9T using XDA Labs
A little update...
I tried Milk kernel but it wasn't anything special.
So, I dirty flashed MiuMix rom to get old kernel back and I noticed that Wlan scanning was ON, I turned it OFF.
Plus, with Ex Kernel Manager I changed the governor for cluster 2 to powersave...
Look at the battery time!
I don't know which setting affected it,maybe all of them but I'm happy with it :good:
Sent from my Mi 9T using XDA Labs
welder73 said:
A little update...
I tried Milk kernel but it wasn't anything special.
So, I dirty flashed MiuMix rom to get old kernel back and I noticed that Wlan scanning was ON, I turned it OFF.
Plus, with Ex Kernel Manager I changed the governor for cluster 2 to powersave...
Look at the battery time!
I don't know which setting affected it,maybe all of them but I'm happy with it :good:
Sent from my Mi 9T using XDA Labs
Click to expand...
Click to collapse
Wow, that's such a crazy battery life. I'm on latest weekly version of xiaomi.eu, Does Ex Kernel Manager work with it too?
Saluzzo97 said:
Wow, that's such a crazy battery life. I'm on latest weekly version of xiaomi.eu, Does Ex Kernel Manager work with it too?
Click to expand...
Click to collapse
I don't see why not...besides, MiuMix is based on Xiaomi Eu...
Try and see, no harm in that
Sent from my Mi 9T using XDA Labs
welder73 said:
I don't see why not...besides, MiuMix is based on Xiaomi Eu...
Try and see, no harm in that
Sent from my Mi 9T using XDA Labs
Click to expand...
Click to collapse
Thank you!! Another thing, what did you precisely do on that app? Which are the settings that I have to touch?
Saluzzo97 said:
Thank you!! Another thing, what did you precisely do on that app? Which are the settings that I have to touch?
Click to expand...
Click to collapse
I wrote it in my post...just change the cluster 2 governer to powersave, that's the only thing that I did with Ex Kernel Manager...
And check your wlan scanning status...
Sent from my Mi 9T using XDA Labs
welder73 said:
I wrote it in my post...just change the cluster 2 governer to powersave, that's the only thing that I did with Ex Kernel Manager...
And check your wlan scanning status...
Sent from my Mi 9T using XDA Labs
Click to expand...
Click to collapse
Ok, sorry ahaha I'm not so able about this app. So I changed the big cluster on powersave, before that it was on "schedutil". Now I have to check "apply on boot" or is it enough to change that option on big cluster? Sorry again and be patient with me please ahaha

Categories

Resources