Database Users

Smart Unlock Not Unlocking

I just got the Lollipop update yesterday via OTA (UK unlocked 910F, not rooted) and I'm having issues with Smart Unlock.
I started by removing my corporate Exchange account from the phone and clearing the trusted certificate store to remove the administrative controls (I've switched to using Nine instead). I enabled Smart Unlock it via the Trusted Agents settings and linked it to my watch but rather than actually unlocking the device when the watch is connected via Bluetooth it just adds an extra swipe to unlock screen before requesting a secure unlock anyway. I've tried it with both PIN and fingerprint security enabled with the same result. Has anyone else been able to get this working with the Note 4?

When I got the lollipop update I factory reset the phone before installing it.
I am having no issues with NFC unlock and location unlock, I just wish they had added WiFi unlock as I don't want to leave GPS turned on when I'm at home. But I am having some issues with Bluetooth unlock with my headset.
The NFC unlock just unlocks the device straight to home screen or the last used app, location unlock removes my fingerprint unlock and makes it swipe to unlock and the Bluetooth one 50% of the time goes to swipe unlock or stays fingerprint unlock.

You don't need to pull the "lock" icon, just swipe anywhere on the screen when you have a bluetooth device connected. The lock icon is to relock the device not unlock it, it's pretty confusing when I you first see it.

gabrymr said:
You don't need to pull the "lock" icon, just swipe anywhere on the screen when you have a bluetooth device connected. The lock icon is to relock the device not unlock it, it's pretty confusing when I you first see it.
Click to expand...
Click to collapse
Thanks, that's exactly what I was doing. I'm used to using Smart Unlock on the Nexus 6 and I tend to swipe from the padlock to unlock that device (although it's not actually a widget that can be dragged on stock Lollipop, it's just habit).

Just adding a thanks, this was giving me so much grief.

Lock screen won't stay set

My lock screen won't stay set to a unlock method. I have changed the unlock to patternpattern, pass code, and fingerprint. After a little while it goes back to just swipe. Even though, I'll go to the setting and it'll say it's still set to whatever method I have it set to. But for whatever reason the actual lock screen goes back to swipe. Also when it does work, the fingerprint reader is hit and miss. I'll have fingerprint and password or code and then the fingerprint reader won't even recognize I'm trying to use it. Anyone else having similar issues or know of a fix?

tyoder87 said:
My lock screen won't stay set to a unlock method. I have changed the unlock to patternpattern, pass code, and fingerprint. After a little while it goes back to just swipe. Even though, I'll go to the setting and it'll say it's still set to whatever method I have it set to. But for whatever reason the actual lock screen goes back to swipe. Also when it does work, the fingerprint reader is hit and miss. I'll have fingerprint and password or code and then the fingerprint reader won't even recognize I'm trying to use it. Anyone else having similar issues or know of a fix?
Click to expand...
Click to collapse
It actually is staying what you set it at.
Samsung as usual has set up some stupid defaults for this phone.
Go here and set it to Instantly and it will work as you expect.
Settings > Quick Settings > Lock screen and security > Secure lock settings > Secure lock time > Instantly with the power key or when the screen times out
With those settings every time you unlock your phone you will need whatever security you set.
With the default settings Samsung has it so your phone will only lock if you do not touch the phone for 10 minutes..... real secure there Samsung...
As for the fingerprint reader, when you set it up hold the phone like you would be unlocking it and use every part of the finger during the setup process.
I added both thumbs and index fingers using the tip, flats, and sides of each during the setup process.
If for some reason it does not want to read still, you can set up the same finger multiple times, do one as just the flat, one as the sides, one as the tip.

Milimbar said:
It actually is staying what you set it at.
Samsung as usual has set up some stupid defaults for this phone.
Go here and set it to Instantly and it will work as you expect.
Settings > Quick Settings > Lock screen and security > Secure lock settings > Secure lock time > Instantly with the power key or when the screen times out
With those settings every time you unlock your phone you will need whatever security you set.
With the default settings Samsung has it so your phone will only lock if you do not touch the phone for 10 minutes..... real secure there Samsung...
As for the fingerprint reader, when you set it up hold the phone like you would be unlocking it and use every part of the finger during the setup process.
I added both thumbs and index fingers using the tip, flats, and sides of each during the setup process.
If for some reason it does not want to read still, you can set up the same finger multiple times, do one as just the flat, one as the sides, one as the tip.
Click to expand...
Click to collapse
That's exactly how everything is set up on my device though. I have it set to lock immediately and did all angles of my fingers. Still won't keep the lock screen set and won't read the fingerprints. It doesn't give me a does not match message or anything. At least when that happens, I know it's trying to read my finger.

tyoder87 said:
That's exactly how everything is set up on my device though. I have it set to lock immediately and did all angles of my fingers. Still won't keep the lock screen set and won't read the fingerprints. It doesn't give me a does not match message or anything. At least when that happens, I know it's trying to read my finger.
Click to expand...
Click to collapse
In that case I do not know.
You could try a factory reset, but I do not know if that will help.
If mine did that I would be returning it for a replacement.

Also make sure settings/lock screen/secure lock/smart lock isn't set to anything that's trusted.
Smart lock leaves the phone in swipe unlock if it recognizes your phone is at your home..or hook up to your Bluetooth, etc.

tyoder87 said:
That's exactly how everything is set up on my device though. I have it set to lock immediately and did all angles of my fingers. Still won't keep the lock screen set and won't read the fingerprints. It doesn't give me a does not match message or anything. At least when that happens, I know it's trying to read my finger.
Click to expand...
Click to collapse
So after digging around some more, I found out what was happening. I have a Moto 360 paired to my phone. I had it as a trusted device and that's what was allowing me to do swipe while still having the lock screen set to something else. However, my fingerprint reader is still acting up. It's still not even trying to read my fingerprints.

tyoder87 said:
My lock screen won't stay set to a unlock method. I have changed the unlock to patternpattern, pass code, and fingerprint. After a little while it goes back to just swipe. Even though, I'll go to the setting and it'll say it's still set to whatever method I have it set to. But for whatever reason the actual lock screen goes back to swipe. Also when it does work, the fingerprint reader is hit and miss. I'll have fingerprint and password or code and then the fingerprint reader won't even recognize I'm trying to use it. Anyone else having similar issues or know of a fix?
Click to expand...
Click to collapse
Go to settings and search smart lock... It shows that if you ate home the screen stays unlock but if u leave anywhere it'll lock..you can turn the location off when. You get into smart lock

The same thing is happening with mine (SM-G935A AT&T). However, when I go to the secure lock settings, it keeps changing from lock instantly to the maximum setting (which shows as 34 minutes and 7 seconds). Smart Lock has been completely disabled by system administrator (I get my corporate email on my phone). Every time I go in and change the secure lock to instant, it reverts back within the next 30 minutes.

[email protected] said:
The same thing is happening with mine (SM-G935A AT&T). However, when I go to the secure lock settings, it keeps changing from lock instantly to the maximum setting (which shows as 34 minutes and 7 seconds). Smart Lock has been completely disabled by system administrator (I get my corporate email on my phone). Every time I go in and change the secure lock to instant, it reverts back within the next 30 minutes.
Click to expand...
Click to collapse
Mine is doing the same thing automatically changes to 34 min and 7 seconds secured lock time without me changing it from instantly w power key so frustrating

[email protected] said:
Mine is doing the same thing automatically changes to 34 min and 7 seconds secured lock time without me changing it from instantly w power key so frustrating
Click to expand...
Click to collapse
If you don't mind me asking, what device administrators do you have setup? Currently I have my company exchange policy, Lookout Mobile, AT&T Protect Plus and Android as registered administrators. I'm starting to wonder if its the combination of services like maybe the Protect Plus and Lookout.

[email protected] said:
If you don't mind me asking, what device administrators do you have setup? Currently I have my company exchange policy, Lookout Mobile, AT&T Protect Plus and Android as registered administrators. I'm starting to wonder if its the combination of services like maybe the Protect Plus and Lookout.
Click to expand...
Click to collapse
Hi! Lookout, email and Android device manager are all administrators I think in personal settings

[email protected] said:
Hi! Lookout, email and Android device manager are all administrators I think in personal settings
Click to expand...
Click to collapse
I figured out the issue, at least for me. First I tried to disable both Lookout and ATT Protect Plus as device administrators but still the lock setting would revert to 34 minutes and 7 seconds. In my account settings for my corporate email, there was a link for all security policies. Sure enough, the screen lock policy showed as 2047 seconds which translates to 34 minutes and 7 seconds. I cannot change the option as that is the corporate policy set by the server.

This is an issue with Samsung s7 including the edge. Mine was playing up from the day I got it. I took it into carphone warehouse assuming it was a setting and the guy serving me basically said to send it back. I eventually got a refund from Samsung (it was painful) and then I stupidly bought another one of these overpriced, over hyped pieces of **** from John Lewis instead. I've always used windows (mobile (i.e. what I'd call old android and what XDA was made for) and then windows phone and briefly windows 10 mobile. From my short experience of using the so called best android phone I have to say gimmicks aside, the features both phones share, windows destroys android, emails, documents, ease of use, fluidity, user experience....oh and a working lock screen. Not happy and it's my own fault, I fell for mass marketing and believing the hype.

I think I found the answer
tyoder87 said:
My lock screen won't stay set to a unlock method. I have changed the unlock to patternpattern, pass code, and fingerprint. After a little while it goes back to just swipe. Even though, I'll go to the setting and it'll say it's still set to whatever method I have it set to. But for whatever reason the actual lock screen goes back to swipe. Also when it does work, the fingerprint reader is hit and miss. I'll have fingerprint and password or code and then the fingerprint reader won't even recognize I'm trying to use it. Anyone else having similar issues or know of a fix?
Click to expand...
Click to collapse
If you have a device like a Bluetooth paired with your s7 edge, make sure that smart lock isn't on. Once I changed that that setting, it stays locked.

Can you describe how to find this page (that showed 2047 seconds)? I want to see if my company IT will change this.

Hi I have s7 edge, here's the problem is I cannot touch the screen, already do hard reset and rebooting still the screen cannot touch. I could not unlock my s7 edge.

Thanks for the help
Originally Posted by Milimbar It actually is staying what you set it at. Samsung as usual has set up some stupid defaults for this phone. Go here and set it to Instantly and it will work as you expect. Settings > Quick Settings > Lock screen and security > Secure lock settings > Secure lock time > Instantly with the power key or when the screen times out With those settings every time you unlock your phone you will need whatever security you set. With the default settings Samsung has it so your phone will only lock if you do not touch the phone for 10 minutes..... real secure there Samsung... As for the fingerprint reader, when you set it up hold the phone like you would be unlocking it and use every part of the finger during the setup process. I added both thumbs and index fingers using the tip, flats, and sides of each during the setup process. If for some reason it does not want to read still, you can set up the same finger multiple times, do one as just the flat, one as the sides, one as the tip.
From:shawnthall15
Thank you for the tip it really helped me fix the lock on my new samsung galaxy amp prime!!!!

Restart your phone
tyoder87 said:
My lock screen won't stay set to a unlock method. I have changed the unlock to patternpattern, pass code, and fingerprint. After a little while it goes back to just swipe. Even though, I'll go to the setting and it'll say it's still set to whatever method I have it set to. But for whatever reason the actual lock screen goes back to swipe. Also when it does work, the fingerprint reader is hit and miss. I'll have fingerprint and password or code and then the fingerprint reader won't even recognize I'm trying to use it. Anyone else having similar issues or know of a fix?
Click to expand...
Click to collapse
I made sure i made my password effective immediately (it was set to 5 seconds) after you lock your phone and it didn't work.
Then I realized that I didn't restart my phone yet.
Lock screen was effective immediately after I restarted my phone. Solved my case!

Fixed
Its quite simple, it is smart as samsung has made s7/edge to recognize you and let your phone stay unlock whenever it is around you. Once, it has been unclocked by you, you dont have to set in the passcode each time to look at your phone. But dont worry, it will revert back to lock mode once it noticed that you'v set it aside on a surface i.e leaving it. Should you want to make your phone locked at all time whenever you want it, simply change the setting as follows: Setting > Lock screen and security > Secure lock settings > Smart lock > (enter your pin) > On-body detection > set it to off. Whallaaa!! Problem solved.
---------- Post added at 06:01 AM ---------- Previous post was at 05:55 AM ----------
tyoder87 said:
My lock screen won't stay set to a unlock method. I have changed the unlock to patternpattern, pass code, and fingerprint. After a little while it goes back to just swipe. Even though, I'll go to the setting and it'll say it's still set to whatever method I have it set to. But for whatever reason the actual lock screen goes back to swipe. Also when it does work, the fingerprint reader is hit and miss. I'll have fingerprint and password or code and then the fingerprint reader won't even recognize I'm trying to use it. Anyone else having similar issues or know of a fix?
Click to expand...
Click to collapse
Its quite simple, it is smart as samsung has made s7/edge to recognize you and let your phone stay unlock whenever it is around you. Once, it has been unclocked by you, you dont have to set in the passcode each time. But dont worry, it will revert back to lock mode once it noticed that you'v set it aside on a surface i.e leaving it. Should you want to make your phone locked at all time whenever you want it, simply change the setting as follows: Setting > Lock screen and security > Secure lock settings > Smart lock > (enter your pin) > On-body detection > set it to off. Whallaaa!! Problem solved.

Go to settings/lock screen and security/other security settings/trust agents and turn off Google Smart lock option.
You are back to instant phone lock.
Cheers🖒

S7 Edge Lock Screen issue, wont unlock

I bought two Galaxy S7 Edge phones recently and have noticed this issue on both phones now. Both are also updated to the latest firmware. Both of us have fingerprints set up and a pattern backup. So far, the issue has occurred to us both twice. I happen to always use my fingerprint to unlock and she always uses pattern out of habit from a past phone. She brought it to me a couple of days ago and said her phone says to wait 60 minutes and try again. I asked how many times she entered it wrong, because of course I thought she entered it wrong. She said she didn't enter it incorrectly. I asked if she tried to reboot, of course not. Anyways, I held on to it and after 60 minutes I entered the pattern to unlock her phone and sure enough it wouldn't work. I rebooted, and tried again and it worked. OK...Weird.
The very next day, it happened on my phone. I always use my fingerprint though so it told me no match found. Say what? Tried again. Same thing. OK, swipe and tried my pattern. It says its incorrect and to try again in 30 seconds. 30 seconds later, I tried again and it locked me out for 60 seconds. This time I rebooted, and after it was done and 60 seconds had passed my pattern was working again.
I don't get why it randomly seems to not recognize that we are putting in the correct pattern or fingerprint. I am however happy that a reboot seems to resolve the issue. Is no one else experiencing this?

Mine doesn't lock instead!
So I tried couple of things. Rebooted, re-initialized Finger Prints and even pattern. Now matter what I do, it won't lock the phone. It will just unlock without asking for passcode, pattern, password or fingerprint. Only option I can think of is to restore the phone and try setting up lock option but that's pain in the a**!! I tried third party apps as to lock screen but none of them have the fingerprint unlock option! And some have ads and weird setup which worked... Gettting frustrating. Perhaps I should try restoring phone if there's no other option left

shunail said:
So I tried couple of things. Rebooted, re-initialized Finger Prints and even pattern. Now matter what I do, it won't lock the phone. It will just unlock without asking for passcode, pattern, password or fingerprint. Only option I can think of is to restore the phone and try setting up lock option but that's pain in the a**!! I tried third party apps as to lock screen but none of them have the fingerprint unlock option! And some have ads and weird setup which worked... Gettting frustrating. Perhaps I should try restoring phone if there's no other option left
Click to expand...
Click to collapse
Entirely different. I'm not sure this is actually an issue as much as it is probably settings. Go to settings, Lock screen and security, Secure lock settings. Check how long Lock automatically is set for (mine is for 5 seconds after the screen turns off automatically and that is set for 2 minutes.). Then turn on lock instantly with power key. Go to smart lock and see if that's being used. IF it is it would keep your phone unlocked when its connected via Bluetooth to a device you told it to trust, or when you are at a trusted place via google maps (such as home or work), or it could simply know your voice, or lastly if it senses that it is on your body (I don't get this one. Seems very insecure, like anyone could pick it up and it would just unlock.). Good luck!

Viper41086 said:
Entirely different. I'm not sure this is actually an issue as much as it is probably settings. Go to settings, Lock screen and security, Secure lock settings. Check how long Lock automatically is set for (mine is for 5 seconds after the screen turns off automatically and that is set for 2 minutes.). Then turn on lock instantly with power key. Go to smart lock and see if that's being used. IF it is it would keep your phone unlocked when its connected via Bluetooth to a device you told it to trust, or when you are at a trusted place via google maps (such as home or work), or it could simply know your voice, or lastly if it senses that it is on your body (I don't get this one. Seems very insecure, like anyone could pick it up and it would just unlock.). Good luck!
Click to expand...
Click to collapse
Forgot to mention, have done all of that. First I had it set Lock Automatically to immediately and tried 5 seconds, 15 seconds to all the 30 minutes, still won't lock (over night till I wok up in the morning)
Smart Lock:
Trusted Device are my car and my watch, but even with bluetooth disabled (just to give it a shot) it still doesn't lock.
Trusted Place: my home, but even with Location Service (GPS) turned off, still won't lock
On body Detection = Off
Trusted Voice = Off
Tried updating phone perhaps something may fix it, nothing.
Tried Security Policy updates and that says ... updated to latest version...
Been using Android since good old HTC Evo days and had no issue with my (last) Note 4 locking with fingerprint!! I love this phone really expect for this issue. Oh yes and another issue, gestures won't work also!!! Tried hand gestures for screenshot, nothing. Smart Stay doesn't work also!!!
Is something wrong with this phone perhaps??

shunail said:
Forgot to mention, have done all of that. First I had it set Lock Automatically to immediately and tried 5 seconds, 15 seconds to all the 30 minutes, still won't lock (over night till I wok up in the morning)
Smart Lock:
Trusted Device are my car and my watch, but even with bluetooth disabled (just to give it a shot) it still doesn't lock.
Trusted Place: my home, but even with Location Service (GPS) turned off, still won't lock
On body Detection = Off
Trusted Voice = Off
Tried updating phone perhaps something may fix it, nothing.
Tried Security Policy updates and that says ... updated to latest version...
Been using Android since good old HTC Evo days and had no issue with my (last) Note 4 locking with fingerprint!! I love this phone really expect for this issue. Oh yes and another issue, gestures won't work also!!! Tried hand gestures for screenshot, nothing. Smart Stay doesn't work also!!!
Is something wrong with this phone perhaps??
Click to expand...
Click to collapse
Hmm.. Have you tried turning off Smart lock all together? Otherwise, all I can think is to factory reset settings before you factory reset the phone.

Factory Settings Reset did it
Factory Settings Reset did it however gestures and smart stay are still issues!! Then I courage myself to do Factory Phone Reset and dang the issue with the gestures persists!!

Bump.
No one else is having this issue? I just happened to be the only one with two new phones that do it?

This literally just happened to me! I was walking to a friend's house and was using the phone just fine - was using Facebook Messenger and Spotify. All of a sudden, I try to unlock it (I have a pattern to draw, not a code) and it doesn't work. I have no idea what's going on but I don't want to factory reset and lose all my contacts and pictures. I only have four tries left to unlock it before it automatically resets itself. I've tried using the Android Device Manager to set a temporary password but since there's already a pattern to draw it won't bypass the lock screen for some reason. I never thought to check the security settings on my phone (why would I if I had a lock screen on it?) so I can't use the Samsung equivalent either. I'm extremely frustrated - been looking for help for about an hour and I'm finding absolutely nothing. It's clearly been a problem before and yet there's no solutions or explanations as to why it's happening??

While I am still having this issue sparsely, I can get around it simply by rebooting. It's just annoying to have to do so.

It's anew feature of S7 called SMART LOCK, meaning your phone knows if you're in a safe place such as your Home, your Car or if you paired a smart watch with your phone and added it as trusted device, as long as you're connected to your watch, the phone knows you're in a safe place so you dont need to enter password to your phone. Or if youre in your car or at Home, then you wont need to enter password to open your phone. But if you want to remove this feature and want to swipe or enter your pin no matter where you are then do this..go to:
SETTING>LOCK SCREEN & SECURITY>SECURE LOCK SETTING>SMART LOCK. Here you'll see "Trusted Places" and "Trusted Device" Just edit or press and hold whatever is in there, e.i your watch, your home address etc...then remove and you should be good to go.

Have you tried turning off Smart lock all together? Otherwise, all I can think is to factory reset settings before you factory reset the phone.

Lock Security Not Working

Is there anyone experiencing that no matter what lock I use, my phone always allows me to just swipe up once to unlock? I tried facial unlock & that works flawlessly, but I also added the secondary pattern and I still swipe up once and my phone just unlocks completely. I also disabled facial recognition with just primary pattern or number lock as the security and the phone still opens right up like no security is on it at all.
Anyone have a solution for this or does this seem like another bug for a future update?

Settings>Display>Navigation Bar>"Unlock with home button" - is this enabled or in any way related to what you're experiencing? Just a guess

james.chiocchio said:
Settings>Display>Navigation Bar>"Unlock with home button" - is this enabled or in any way related to what you're experiencing? Just a guess
Click to expand...
Click to collapse
I just took a look and that option is off. the kick screen doesn't skip. I have to swipe up Everytime...let's me right in

Do you allow Smart Lock on a network or attached device? What you're describing is the phone's behavior when connected to a Smart Lock approved device.

BarryH_GEG said:
Do you allow Smart Lock on a network or attached device? What you're describing is the phone's behavior when connected to a Smart Lock approved device.
Click to expand...
Click to collapse
I do, my Huawei watch

Swiissjokr said:
I do, my Huawei watch
Click to expand...
Click to collapse
That's what is doing it. I had my Asus Zenwatch 2 listed as a trusted device in Smart Lock and my phone was doing the same thing. I removed all trusted devices and now I have to use my pin, finger print or irises to unlock my phone.
Sent from my wickedly kewl Galaxy S8 using my fingers. Duh!!!

It is set to not turn on the lock when the screen goes off for 10 minutes by default. You have to go I to lock screen, secure lock settings
Sent from my SM-G950U using Tapatalk

truckerdewd said:
That's what is doing it. I had my Asus Zenwatch 2 listed as a trusted device in Smart Lock and my phone was doing the same thing. I removed all trusted devices and now I have to use my pin, finger print or irises to unlock my phone.
Click to expand...
Click to collapse
I removed it from trusted devices and now I'm back to normal thank you

Swiissjokr said:
I removed it from trusted devices and now I'm back to normal thank you
Click to expand...
Click to collapse
Welcome
Sent from my wickedly kewl Galaxy S8 using my fingers. Duh!!!

So it's this a bug? Trusted devices should unlock only when phone is connected or in vicinity to them.

Also seeing this same behaviour. My home wifi is a trusted device and obviously it unlocks when I'm connected to it, but now for the second time I've been away from home for over 2 hours and it happily unlocks with just swipe. It only asks for biometrics if I reboot the phone. So it seems that there's a bug in trusted sources whereby it believes its still connected to wifi for some time after you disconnect!

I had to disable my trusted place (home) even though I was 100km away to fix the issue.

Lock Security not Working
It may also be the On-Body Detection is set to ON under the Smart Lock feature

The way I fixed mine after reading all of these posts was Settings>Lock Screen and Security>Secure Lock Settings>(Enter Pin or whatever security option you have enabled)>Secured Lock Time>, then add the diode to the first selection, "Instantly with the power key or when the screen times out." Then it prompted my security feature everytime the phone locked. When adding a timeout period if you lock with the lock button for some reason it thinks you did it by choice (owner) and figures you will open it without the need to input security feature. I have everything mentioned above off so, I was baffled as to why it didn't prompt my pin option. Now timeout or self lock (by owner) it prompts pin all the time. Hope this helps.

Note 8
Mine has the same issue. but i dont have any trusted devices. i think its a bug in the software. It only asks for pin or iris scan after a couple of minutes being locked otherwise i can just swipe and it unlocks which is ****.

Don't do hard resets, login to the samsung account, go to find my mobile, then unlock your phone from there, it will delete the password. It will tell you to use a pin for access to samsung and the phone etc. Add the pin into the phone, then unlock the phone when you're on the phone screen. This will wipe off the passcode, this is so your settings don't keep restarting (happened to my note 8). Next part is to clear credentials in the settings and reset settings. None your data, apps will be affected, just the theme and basic security stuff. Now you can finally reset your pattern to however to you want it to be. As good as gold! Hope this helps.

Thanks a lot. I finally figured out what the issue was. My On-Body-Detection in the Smart Lock settings was On.

Just go to Setting -->Lock Screen and Security --> Smart Lock. Deactivate all the options there.

I have a Moto E4 and I have a secondary pattern up and everytime I swipe up it unlocks it instead of making me put in the pattern

6T and lockscreen fail

Yesterday I received my new OnePlus 6T A6013. Immediately it was updated to last Oxygen 9.0.5. After migrate and install apps and data I discovered that fingerprint doesn't work in lock screen. Really there are a crazy problem:
- if I don't touch the phone during some minutes/hours it doesn't lock automatically, although setup is in 30 seconds. So it's easy that phone call someone while it's in my pocket (today happens while I drive).
- I marked "lock screen" like an option when I press ON/OFF button. So I can lock manually.
- If I locked it, I see fingerprint signal drawed but doesn't work so I need to unlock with pin. Face recognition doesn't appear.
- If I locked it and I push ON/OFF button again the 6T is unlocked without pin. Or If I tap twice on screen. I don't need enter PIN or PASSWORD (I tried both).
- In Privacy Setup screen I can select unlock with nothing, drawing, sliding, PIN or Password. I don't have an option to select fingerprint or face ID, Both are active into their sections with face and fingers stores.
The problem is really stupid but create an very important security problem. First I had to undelete my pay wallet and bank apps. And app to open my home door or turn off home alarm.
After detect this problem I restore my 6T to factory and try again with same result. I made a clean install without import data or download from Google backup. And problem persists.
Can anybody help me?

Do you have Smart Lock enabled at all?

aidrabmol said:
Yesterday I received my new OnePlus 6T A6013. Immediately it was updated to last Oxygen 9.0.5. After migrate and install apps and data I discovered that fingerprint doesn't work in lock screen. Really there are a crazy problem:
- if I don't touch the phone during some minutes/hours it doesn't lock automatically, although setup is in 30 seconds. So it's easy that phone call someone while it's in my pocket (today happens while I drive).
- I marked "lock screen" like an option when I press ON/OFF button. So I can lock manually.
- If I locked it, I see fingerprint signal drawed but doesn't work so I need to unlock with pin. Face recognition doesn't appear.
- If I locked it and I push ON/OFF button again the 6T is unlocked without pin. Or If I tap twice on screen. I don't need enter PIN or PASSWORD (I tried both).
- In Privacy Setup screen I can select unlock with nothing, drawing, sliding, PIN or Password. I don't have an option to select fingerprint or face ID, Both are active into their sections with face and fingers stores.
The problem is really stupid but create an very important security problem. First I had to undelete my pay wallet and bank apps. And app to open my home door or turn off home alarm.
After detect this problem I restore my 6T to factory and try again with same result. I made a clean install without import data or download from Google backup. And problem persists.
Can anybody help me?
Click to expand...
Click to collapse
1. The default screen turn off time is very high, so maybe check if its too high and reduce it to about 30s and test again, also anything touching the screen can cause it to remain on.
2. Which device do you have? Locking manually is there regardless, so not sure what the problem here.
3. Re-add fingerprint and face data, report back on your results.
4. If you have smartlock enabled and the device is on a certain wifi network, in your hands, pocket or connected to a bluetooth device that's marked as safe, it won't ask for a password or pin as it didn't fully lock to begin with, since its within a safe zone, this is generally left up to your judgement to enable.
5. Fingerprint and Faceunlock are automatically enabled once data is added, proceed with number three and report back.
Btw kindly post all questions in the questions and answers section, mods may move this.

mang0 said:
Do you have Smart Lock enabled at all?
Click to expand...
Click to collapse
Not, one of things that I checked.

delete

Not, I checked it first of all.

delete