Is this phone still rootable? - AT&T Samsung Galaxy S7 Questions & Answers

I have a g930a with the basband version G930AUCS4APK1 and I have done all OTA updates.
Is it still rootable? Am I on the new bootloader?

Root???
FreshIce21 said:
I have a g930a with the basband version G930AUCS4APK1 and I have done all OTA updates.
Is it still rootable? Am I on the new bootloader?
Click to expand...
Click to collapse
THAT is an EXCELLENT question...

FreshIce21 said:
I have a g930a with the basband version G930AUCS4APK1 and I have done all OTA updates.
Is it still rootable? Am I on the new bootloader?
Click to expand...
Click to collapse
go to the root thread, follow the instructions and give it a shot. That's really the best way to find out...just make sure you have the APK1 firmware on standby in case it doesn't turn out well.

SantinoInc said:
go to the root thread, follow the instructions and give it a shot. That's really the best way to find out...just make sure you have the APK1 firmware on standby in case it doesn't turn out well.
Click to expand...
Click to collapse
Pretty much this. Backup files you don't want to lose, download the stock Odin files, and give rooting a shot. Worst case, you just gotta flash stock back via Odin. You may be able to flash an earlier firmware via Odin and root from there. Though I doubt Odin would let you. If I were you, I'd download all the applicable files, backup my data, wait until I've got a good chink of time ithat I don't need my phone and start playing around with it. I had all sorts of complications rooting mine s{ I was phone-less for like an hour

SantinoInc said:
go to the root thread, follow the instructions and give it a shot. That's really the best way to find out...just make sure you have the APK1 firmware on standby in case it doesn't turn out well.
Click to expand...
Click to collapse
where can i find the apk1 firmware?

FreshIce21 said:
where can i find the apk1 firmware?
Click to expand...
Click to collapse
Sammobile.com
Just search by your phones model #.

SantinoInc said:
Sammobile.com
Just search by your phones model #.
Click to expand...
Click to collapse
They don't have any firmware for the att model just USB drivers

Any way to extract the firmware from my phone??

Update 12/6/16
I downgraded to the U firmware (G930UUEU4API3) following the steps here: http://forum.xda-developers.com/att-galaxy-s7/how-to/g930uueu4api3-firmware-download-t3481159
I then rooted using Max Lee's directions and I have root! Haven't tried rooting directly from APK1 firmware

I successfully rooted my G930AUCS4APK1 using princecomsy how to.
http://forum.xda-developers.com/att-galaxy-s7/how-to/root-s7-att-g930a-g935a-t3410538
I'm still trying to learn the nomenclature....so, i'm assuming by the PK1 one part of the version that it is new than PI3?
Just wasn't sure about UUE part. Sorry, noob in this dept.
But, wanted to at least share that I had successful root with OP baseband.
Now to figure out how to make the battery last more than 10hrs and respond a little quicker.
The V15 fix hasn't seem to do much in comparison to stock OTA.
Hope this helps.

bweegn said:
I'm still trying to learn the nomenclature....so, i'm assuming by the PK1 one part of the version that it is new than PI3?
Just wasn't sure about UUE part. Sorry, noob in this dept.
Click to expand...
Click to collapse
(for the others that may not know too)
The last three characters of the release are the ones that matter.
* The P indicates the year (P=16th letter of the alphabet, 2016)
* The K indicates the month (K=11th letter of the alphabet, November)
* The 1 represents the release number (to allow for more than one release each month)
Keep in mind that once you flash a newer firmware on the S7, you cannot go back to an older one. Odin will not let you flash it. Even if you could, it would most likely trip the KNOX flag.

Related

SM-g900v 5.0 rootable firmwares

Hi,
In my possession i have the following firmwares:
...BOC4
...BOD5
and my phone is installed on the ...BOG5 firmware.
I wanted to know out of the above three which firmwares can be rooted, if any? So that i can flash the rootable firmware on my S5 verizon and root the phone.
thanks.
smn216 said:
Hi,
In my possession i have the following firmwares:
...BOC4
...BOD5
and my phone is installed on the ...BOG5 firmware.
I wanted to know out of the above three which firmwares can be rooted, if any? So that i can flash the rootable firmware on my S5 verizon and root the phone.
thanks.
Click to expand...
Click to collapse
Your question has already been answered in a previous thread you started. Your phone is on BOG5 firmware therefore the only firmware you can flash onto your phone is BOG5. BOC4 and BOD5 can be rooted, but you cannot flash either onto your phone. Your phone cannot be rooted.
Ouch! Frosty are we? Must have been a bad day as usual for you..
Anyway, FYI: I didn't ask that question before, I asked about downgrading ans this is about replacing current 5.0 firmwares with other 5.0 firmwares.
Lighten up man, take it easy with life and you won't be so bitter all the the time.
smn216 said:
Ouch! Frosty are we? Must have been a bad day as usual for you..
Anyway, FYI: I didn't ask that question before, I asked about downgrading ans this is about replacing current 5.0 firmwares with other 5.0 firmwares.
Lighten up man, take it easy with life and you won't be so bitter all the the time.
Click to expand...
Click to collapse
The problem is this question has been asked many times and the answer will never change. If you are on OG5, you cannot downgrade, you cannot flash backwards, and you cannot root. Period. Sorry, but you can thank Verizon and Samsung for that.
Any likely root to come out in the near future then? For example when this version of firmware gets old and they get another update firmware released.
Not unless someone finds a usable exploit. Possible, but not looking very good.
smn216 said:
Any likely root to come out in the near future then? For example when this version of firmware gets old and they get another update firmware released.
Click to expand...
Click to collapse
Do everyone here a favor and search before you post. It is rule#1, and your questions have all been answered countless times. Maybe YOU should give it a rest instead.

[update] G930TUVU3APG1 firmware available

It seems a new update is about to roll out. The build is BG1.
Maybe just a security patch containing update, but the thing is, the odin TAR is available already.
→ Download S7 firmware
Have fun!
Was available for the s7, but not the edge for me.
When I click download I just get a blank folder with them name of the firmware. How can I get the actual firmware or am I doing something wrong?
Hgatica99 said:
When I click download I just get a blank folder with them name of the firmware. How can I get the actual firmware or am I doing something wrong?
Click to expand...
Click to collapse
G930TUVU3APG1_CL8439036_QB10212948_REV02_user_low_ship_MULTI_CERT.rar
muniz_ri said:
G930TUVU3APG1_CL8439036_QB10212948_REV02_user_low_ship_MULTI_CERT.rar
Click to expand...
Click to collapse
Thanks so much for the link but quick question, how come this ones 1.8 gigs but the one off sammobile is 2.1 gigs?
Hgatica99 said:
Thanks so much for the link but quick question, how come this ones 1.8 gigs but the one off sammobile is 2.1 gigs?
Click to expand...
Click to collapse
I believe that sammobile uses .zip compression. I compressed the 5 files using .rar
muniz_ri said:
I believe that sammobile uses .zip compression. I compressed the 5 files using .rar
Click to expand...
Click to collapse
Which csc do I flash? the Home one or the other?
Has anyone with root tried this update?
hella356 said:
Has anyone with root tried this update?
Click to expand...
Click to collapse
I flashed the latest firmware and was able to root it and install xposed and other mods.
Hgatica99 said:
I flashed the latest firmware and was able to root it and install xposed and other mods.
Click to expand...
Click to collapse
Thanks! Do you feel like there's any performance/stability advantages to the PG1 update?
hella356 said:
Thanks! Do you feel like there's any performance/stability advantages to the PG1 update?
Click to expand...
Click to collapse
I rooted using a custom script someone made in the att thread. It fixed the cpu frequencie issues and adjusted each governor of the small and big clusters. So far so good with only minot hiccups once in a while. I haven't noticed much of a difference with the pg1 firmware if any. If you need help rooting check out the att forum or i can help when i get back home.
if we are already rooted on PD8, can we just flash this ontop of PD8 and retain root? What about user data?
I got this update on 2 S7's and on both of them, I now have cellular data issues. Wifi calling will keep giving me a notice that my phone is going to use wifi for calls when the feature is set to prefer Cellular for calls. Rebooting doesn't help, it will eventually say it again. I have to keep turning off wifi to force the message away. And during browsing on cellular, it drops a lot even though I know I have great coverage where I use it. With 2 phones, and only have this update, I think something is wrong with this firmware.
S7 (non-edge) not rooted.
Build: MMB29M.G930TUVU3APG1
Security version:
MDF v2.0 Rel 7
VPN v1.4 Rel 6.0
Android security patch level July 1, 2016
seanvree said:
if we are already rooted on PD8, can we just flash this ontop of PD8 and retain root? What about user data?
Click to expand...
Click to collapse
I haven't tried that, I just flashed the whole firmware via odin and rerooted again
---------- Post added at 04:46 PM ---------- Previous post was at 04:42 PM ----------
xenon2000 said:
I got this update on 2 S7's and on both of them, I now have cellular data issues. Wifi calling will keep giving me a notice that my phone is going to use wifi for calls when the feature is set to prefer Cellular for calls. Rebooting doesn't help, it will eventually say it again. I have to keep turning off wifi to force the message away. And during browsing on cellular, it drops a lot even though I know I have great coverage where I use it. With 2 phones, and only have this update, I think something is wrong with this firmware.
Build: MMB29M.G930TUVU3APG1
Security version:
MDF v2.0 Rel 7
VPN v1.4 Rel 6.0
Android security patch level July 1, 2016
Click to expand...
Click to collapse
I haven't had any issues, everything works fine. Here go down till you find generic galaxy s7 after root process and flash the zip he made via Flashfire. See if that helps. Did you factory reset after rooting btw?
I am not rooted. I just saw this Firmware thread and figured this was a good place to talk about my issue related to this firmware. I will update my previous post to show no rooting. All stock.
xenon2000 said:
I am not rooted. I just saw this Firmware thread and figured this was a good place to talk about my issue related to this firmware. I will update my previous post to show no rooting. All stock.
Click to expand...
Click to collapse
Oh, sorry, then I'm not sure what could be the issue, you could try clearing cache in recovery.
Does anyone know where to get the PG1.tar files and how to flash them VIA ODIN? I'm on a soft brick right now
seanvree said:
Does anyone know where to get the PG1.tar files and how to flash them VIA ODIN? I'm on a soft brick right now
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=24572369242688258 here ya go
Bit of an emergency and I'm on an old phone I can't find charger for but I need the .tar file for the firmware before this last update. I kept refusing the update and today I went to root finally and I'm stuck in boot loop with the engboot
jaxwithanx said:
Bit of an emergency and I'm on an old phone I can't find charger for but I need the .tar file for the firmware before this last update. I kept refusing the update and today I went to root finally and I'm stuck in boot loop with the engboot
Click to expand...
Click to collapse
A factory reset should fix it, this happened to me as well.

Anyone know where I can get the latest G930P firmware G930PVPS4APJ2 ?

As of 10/26, Sprint rolled out the latest firmware for G930P (Galaxy S7), G930PVPS4APJ2. I have been searching everywhere since then and it has been 3 days without any luck. Since by mistake I loaded the G930U's API3 with the latest bootloader 4 and I am not able to downgrade to any of the older G930P firmwares. The worst part is that it also destroyed my factory SIM unlock. I want to go back to the G930P firmware and request to have it unlocked again. Someone please help. If this firmware is not yet available for downloading yet, any idea normally how long it takes from the day a firmware is rolled out until it is available on the web for downloading?
Thanks in advance for any help or info.
I'm glad someone posted this. I tried downgrading so I could root my S7 but it failed and now I'm assuming the only way to fix it is to flash stock firmware.
Has anyone had any luck getting the firmware for PJ2?
i found this,but i dont trust it
http://forum.a2phone.ir/download-ce...usa-sprint-android-6-0-1_4file-firmware.html?
Whysthewifigone? said:
i found this,but i dont trust it
http://forum.a2phone.ir/download-ce...usa-sprint-android-6-0-1_4file-firmware.html?
Click to expand...
Click to collapse
I have seen that and a few others pointing back to the same middle eastern language website asking to purchase premium service also. They all look extremely fishy and unsafe. I am and I suggest to stay away from them.
kfsohn said:
I have seen that and a few others pointing back to the same middle eastern language website asking to purchase premium service also. They all look extremely fishy and unsafe. I am and I suggest to stay away from them.
Click to expand...
Click to collapse
Yeah I wouldn't trust it either. If anyone does get ahold of the PJ2 fw, please be kind and share
powerstroke said:
Yeah I wouldn't trust it either. If anyone does get ahold of the PJ2 fw, please be kind and share
Click to expand...
Click to collapse
i think thats what i need to go back to stock completely,i cant get any of the other firmwares to flash over to my phone. none of the official ones from pj2 down works for me, sw rev check fail system
I can't even update to PH7. It downloads fine, but during the install part (blue screen/android dude) it constantly fails at 32%... I hate to have to flash with Odin, and re-setup my phone (apps, homescreen layout, etc.).
Does anyone know of a link to PH7 that has decent download speeds, like a torrent? Sammobile speeds are so slow.
NewWorldOrphan9 said:
I can't even update to PH7. It downloads fine, but during the install part (blue screen/android dude) it constantly fails at 32%... I hate to have to flash with Odin, and re-setup my phone (apps, homescreen layout, etc.).
Does anyone know of a link to PH7 that has decent download speeds, like a torrent? Sammobile speeds are so slow.
Click to expand...
Click to collapse
Search for SamFirm. It's an executable you launch on Windows and search for the firmware for your model and region you need and download it. It's the quickest I have seen so far.
This... I also need. Stuck until I get it. Bahhhhhh I don't like the s7 after 4 days. Didn't realize these updates pushed new bootloader version. Trying to build a ROM here... Dafuq?!?!?! -.-"
NewWorldOrphan9 said:
I can't even update to PH7. It downloads fine, but during the install part (blue screen/android dude) it constantly fails at 32%... I hate to have to flash with Odin, and re-setup my phone (apps, homescreen layout, etc.).
Does anyone know of a link to PH7 that has decent download speeds, like a torrent? Sammobile speeds are so slow.
Click to expand...
Click to collapse
Can you upload your download?
Whysthewifigone? said:
Can you upload your download?
Click to expand...
Click to collapse
NewWorldOrphan9 said:
I can't even update to PH7. It downloads fine, but during the install part (blue screen/android dude) it constantly fails at 32%... I hate to have to flash with Odin, and re-setup my phone (apps, homescreen layout, etc.).
Does anyone know of a link to PH7 that has decent download speeds, like a torrent? Sammobile speeds are so slow.
Click to expand...
Click to collapse
All... Try this link. Should solve your PH7 problems if you haven't found it already. No PJ2 yet, Although it shows up as a repo...
Code:
Checking firmware for SM-G930P/SPR/G930PVPS4APJ2/G930PSPT4APJ2/G930PVPS4APJ2
Error: Could not send BinaryInform. Status code 200/400
Request was invalid. Are you sure the input data is correct?
FYI it also says the tools deprecated. And to use fw.updato.com... But the tool seems to still work, so... Your call really. I've attached it here in case you don't want to click any further.
hoffman1984 said:
FYI it also says the tools deprecated. And to use fw.updato.com... But the tool seems to still work, so... Your call really. I've attached it here in case you don't want to click any further.
Click to expand...
Click to collapse
Do i have to flash these files in a certain order? or all at once? And, do I use the HOME_CSC or the CSC file?
Edit: **** yeah! I flashed the BT, AP, CP, and HOME_CSC all at once in Odin v3.11.1 and it didn't wipe data, just updated my phone to PH7. I am now updating via OTA to PJ2.
NewWorldOrphan9 said:
Do i have to flash these files in a certain order? or all at once? And, do I use the HOME_CSC or the CSC file?
Edit: **** yeah! I flashed the BT, AP, CP, and HOME_CSC all at once in Odin v3.11.1 and it didn't wipe data, just updated my phone to PH7. I am now updating via OTA to PJ2.
Click to expand...
Click to collapse
You're supposed to flash all at once... Careful going to PJ2 though. bootloader version changes... And they haven't released flashable firmware for PJ2. I found a workaround flashing some U firmware (PI3) with new bootloader 4. Here's the link i went to. And i might add this is a worst case scenario. There's no going back due to the 7's locked bootloader. Of course this is only if you brick your current PJ2 somehow. Which i managed. Developers at work! Anyhow, wish you luck on PJ2, and i'll start development on it (depending on the nougat drop date) once i get a firmware release. Cheers!
hoffman1984 said:
You're supposed to flash all at once... Careful going to PJ2 though. bootloader version changes... And they haven't released flashable firmware for PJ2. I found a workaround flashing some U firmware with new bootloader 4. Here's the link i went to. And i might add this is a worst case scenario. There's no going back due to the 7's locked bootloader. Of course this is only if you brick your current PJ2 somehow. Which i managed. Developers at work! Anyhow, wish you luck on PJ2, and i'll start development on it (depending on the nougat drop date) once i get a firmware release. Cheers!
Click to expand...
Click to collapse
*Long post incoming...
The OTA update to PJ2 went fine, no problems. Currently running smooth. My initial issue was I was previously rooted, and decided to go back to stock. When I went back to stock I flashed the PG1 firmware but it wasn't from Sammobile. I downloaded all the firmware files separately from an XDA post that the root post linked too (big mistake). I then didn't flash them all at the same time, and I don't think I flashed the HOME_CSC file, just the CSC one. It went fine and everything but when PH7 dropped everytime I tried to OTA update to PH7 it would fail at 32% every time during the bluescreen/android guy screen. I'm not sure what's being checked at 32% to why it failed there, but my guess was that the files I flashed did something that was invalid and the updating process wouldn't continue becuase of a validation issue, probably from flashing just CSC file and not HOME_CSC file, just a guess.
After I flashed PH7, I was so happy my data wasn't wiped, and was also happy when PJ2 updated just fine. Though I was bummed, I thought PJ2 was the Nougat update...
You're a life-saver dude! And, thanks for the website you gave me to download the firmware, took like 15min to download a 2.5GB file, compared to 5 hours when downloading from Sammobile and other sites. Thanks a bunch!
I had an S2 and S5 for 2 years each before the S7 and damn were those easy to root and flash ROMs/Mods on. Damn locked bootloader! The one thing I think Samsung fcked up on with this phone. I should have waited for the Google Pixel... I'm with Sprint (obv) and re-newing my contract I get a discount off the phone, and having an unlimited data family plan, plus a discount on my bill for where I work made me stay and renew my contract with Sprint.
What exactly are you working on? A way to unlock the bootloader, an easy way to root (the current way is tedious and laggy), or a ROM? I'm interested.
#TooMuchCoffee
Sent from my SM-G930P using Tapatalk
NewWorldOrphan9 said:
Do i have to flash these files in a certain order? or all at once? And, do I use the HOME_CSC or the CSC file?
Edit: **** yeah! I flashed the BT, AP, CP, and HOME_CSC all at once in Odin v3.11.1 and it didn't wipe data, just updated my phone to PH7. I am now updating via OTA to PJ2.
Click to expand...
Click to collapse
NewWorldOrphan9 said:
*Long post incoming...
The OTA update to PJ2 went fine, no problems. Currently running smooth. My initial issue was I was previously rooted, and decided to go back to stock. When I went back to stock I flashed the PG1 firmware but it wasn't from Sammobile. I downloaded all the firmware files separately from an XDA post that the root post linked too (big mistake). I then didn't flash them all at the same time, and I don't think I flashed the HOME_CSC file, just the CSC one. It went fine and everything but when PH7 dropped everytime I tried to OTA update to PH7 it would fail at 32% every time during the bluescreen/android guy screen. I'm not sure what's being checked at 32% to why it failed there, but my guess was that the files I flashed did something that was invalid and the updating process wouldn't continue becuase of a validation issue, probably from flashing just CSC file and not HOME_CSC file, just a guess.
After I flashed PH7, I was so happy my data wasn't wiped, and was also happy when PJ2 updated just fine. Though I was bummed, I thought PJ2 was the Nougat update...
You're a life-saver dude! And, thanks for the website you gave me to download the firmware, took like 15min to download a 2.5GB file, compared to 5 hours when downloading from Sammobile and other sites. Thanks a bunch!
I had an S2 and S5 for 2 years each before the S7 and damn were those easy to root and flash ROMs/Mods on. Damn locked bootloader! The one thing I think Samsung fcked up on with this phone. I should have waited for the Google Pixel... I'm with Sprint (obv) and re-newing my contract I get a discount off the phone, and having an unlimited data family plan, plus a discount on my bill for where I work made me stay and renew my contract with Sprint.
What exactly are you working on? A way to unlock the bootloader, an easy way to root (the current way is tedious and laggy), or a ROM? I'm interested.
#TooMuchCoffee
Sent from my SM-G930P using Tapatalk
Click to expand...
Click to collapse
Glad you got squared away... I'm not really working on much. Just going to Mod a Stock ROM again, to start. I'm probably not the guy who will figure out custom recovery on the phone. lol But I'm going to dive into some documentation on the topic, and get acquainted. That's a far reach, though. I just don't see a lot of support or development for this phone series. So I want to put some stuff out there. Maybe even slim down and automate the rooting process. (Think SkipSoft Android Toolkit)
I don't know. Any ideas or requests are always welcomed.
#Idon'tDoCoffeeButI'mUpOnOtherThingsLOL
https://www.androidfilehost.com/?fid=312978532265364647 here you good if you like
much thanks
---------- Post added at 11:14 PM ---------- Previous post was at 11:10 PM ----------
a noob question.
once i compete downloading this firmawre , will i be able to flash it through odin without errors so i can go back to stock again ?
BTW im already on the latest update!
thanks in advance
Download https://www.androidfilehost.com/?w=search&s=G930P&type=files
endlessahmed said:
---------- Post added at 11:14 PM ---------- Previous post was at 11:10 PM ----------
a noob question.
once i compete downloading this firmawre , will i be able to flash it through odin without errors so i can go back to stock again ?
BTW im already on the latest update!
thanks in advance
Click to expand...
Click to collapse
If you're on the latest (PJ2) stay right where your are. There's no going backwards from there with the release on bootloader 4. You need to wait out the PJ2 firmware release.

Question about flashing SM-935U

Hello I was wondering if it was possible for me to follow this guide http://forum.xda-developers.com/ver...de-flashing-sm-935u-firmware-verizon-t3415145 to flash SM-935U?
I have a SM-G935V
Android Version: 6.0.1
Baseband Version: G935VVRS4APH1
Kernal: 3.18.20
Build number: MMB29M.G935VVRS4APH1
Sorry if a lot of these threads get posted, I just don't want a brick sitting on my desk.
I don't believe so, however I may be mistaken. The day before I decided to flash the U firmware, I had actually spent a couple of hours just updating my phone whilst at work, so I was on the P13 firmware by the time I got to it. I would say that you're safe, based solely on the reason that the guide doesn't indicate that you ought to be on a specific firmware. Best of luck!
Thanks, I might give it a try this weekend.
Trylr said:
Thanks, I might give it a try this weekend.
Click to expand...
Click to collapse
I got a sweet deal for a sealed Verizon S7 Edge on Swappa. Hoping to flash the U Firmware and use it on Cricket. Please update the post on how it went for you! Would be great to know if it's safe or not. Cheers!
blackra1n said:
I got a sweet deal for a sealed Verizon S7 Edge on Swappa. Hoping to flash the U Firmware and use it on Cricket. Please update the post on how it went for you! Would be great to know if it's safe or not. Cheers!
Click to expand...
Click to collapse
I just gave the guide a try and it does work for the most part. This guide will work on PH1, but only if you flash these updated firmware files: http://forum.xda-developers.com/showpost.php?p=66014809&postcount=2. After following the guide and using those updated files, I am successfully on the U firmware.
Trylr said:
I just gave the guide a try and it does work for the most part. This guide will work on PH1, but only if you flash these updated firmware files: http://forum.xda-developers.com/showpost.php?p=66014809&postcount=2. After following the guide and using those updated files, I am successfully on the U firmware.
Click to expand...
Click to collapse
Thanks! I followed that guide and installed the U firmware then I flashed Stang5litre ROM to get all the fixes plus a few mods all baked into one and everything's been great and my service is outsiding. Battery life is a little crap though...

What's the latest update we can use and not lose root?

I'm not well versed in this realm of rooting, but I've rooted my V20 (H918) and I'd like to update to the latest version possible and not lose root. I think it involves using some kdz file or something and flashing that, is that right? Let me know, thank you.
Wrong, you have to use this @runningnak3d tutorial to go back to root...but so far, even if you are on H91010T, you can roll back and root. ARB has not yet been implemented on this phone, so you're good to use any rooting method you see fit in this forum. Enjoy!
https://forum.xda-developers.com/v20/how-to/root-h910-v10m-t3664500
jreed3786 said:
Wrong, you have to use this @runningnak3d tutorial to go back to root...but so far, even if you are on H91010T, you can roll back and root. ARB has not yet been implemented on this phone, so you're good to use any rooting method you see fit in this forum. Enjoy!
https://forum.xda-developers.com/v20/how-to/root-h910-v10m-t3664500
Click to expand...
Click to collapse
I think you may be responding to the wrong thread? I wasn't asking how to root, I've already rooted my phone. Also, I said I have a H918, not a H91010T.
Mr December said:
I think you may be responding to the wrong thread? I wasn't asking how to root, I've already rooted my phone. Also, I said I have a H918, not a H91010T.
Click to expand...
Click to collapse
Oops!!!! LOL! That darn 8 looked like a 0! My bad, bro! LOL. Late night!!!
You can use kdz writter to upgrade to kdz with new security updates. You will not lose root.
jreed3786 said:
Wrong, you have to use this @runningnak3d tutorial to go back to root...but so far, even if you are on H91010T, you can roll back and root. ARB has not yet been implemented on this phone, so you're good to use any rooting method you see fit in this forum. Enjoy!
https://forum.xda-developers.com/v20/how-to/root-h910-v10m-t3664500
Click to expand...
Click to collapse
Wait i thought ARB was implemented on the lg v20 already, does that mean if i am on H91810Q, (T-Mobile) i don't have ARB yet?
jreed3786 said:
Oops!!!! LOL! That darn 8 looked like a 0! My bad, bro! LOL. Late night!!!
Click to expand...
Click to collapse
Haha, it's alright, man.
shomi1417 said:
You can use kdz writter to upgrade to kdz with new security updates. You will not lose root.
Click to expand...
Click to collapse
Thank you, I'll research this and see how to go about this.
do not use anything kdz to flash... you will lose root! you need to flash a TWRP flashable zip to update and keep root
dimm0k said:
do not use anything kdz to flash... you will lose root! you need to flash a TWRP flashable zip to update and keep root
Click to expand...
Click to collapse
Thank you! That would've been atrocious. Can you point me to a guide that explains this? I'd hate to make a rookie mistake like I would've made and accidentally update the firmware past 10J.
Mr December said:
Thank you! That would've been atrocious. Can you point me to a guide that explains this? I'd hate to make a rookie mistake like I would've made and accidentally update the firmware past 10J.
Click to expand...
Click to collapse
I don't know what version of H918 you're on now, but if I'm not mistaken 10k is the last one that you can still mess up and still get root back by downgrading to an earlier version, root and then upgrade. any version after 10k will increment ARB to 1 whereby you will not be able to get root if you lose it. that said, the latest version out now is 10s and if you have root then you should also have TWRP. here's my guide for updating to the latest versions while keep root https://forum.xda-developers.com/v20/development/rom-h91810q-stock-rom-twrp-flashable-zip-t3681312. looking at this now, I haven't posted the 10s update file, which I will do now... keep in mind that if you update to 10s that if you lose TWRP you'll be fscked and stuck without root, which at this point could be permanently.
EDIT: 10s is a go! original post updated with link. also removing the older versions from Google Drive to free up space... if they're still needed, PM
dimm0k said:
I don't know what version of H918 you're on now, but if I'm not mistaken 10k is the last one that you can still mess up and still get root back by downgrading to an earlier version, root and then upgrade. any version after 10k will increment ARB to 1 whereby you will not be able to get root if you lose it. that said, the latest version out now is 10s and if you have root then you should also have TWRP. here's my guide for updating to the latest versions while keep root https://forum.xda-developers.com/v20/development/rom-h91810q-stock-rom-twrp-flashable-zip-t3681312. looking at this now, I haven't posted the 10s update file, which I will do now... keep in mind that if you update to 10s that if you lose TWRP you'll be fscked and stuck without root, which at this point could be permanently.
EDIT: 10s is a go! original post updated with link. also removing the older versions from Google Drive to free up space... if they're still needed, PM
Click to expand...
Click to collapse
Man that is awesome news! Thank you for linking me to your guide. I will do it tonight when I have the time! My current version is 10J, btw.
Mr December said:
Man that is awesome news! Thank you for linking me to your guide. I will do it tonight when I have the time! My current version is 10J, btw.
Click to expand...
Click to collapse
if you're willing to take on the risk then go ahead... I did and am still rooted. just ask questions if you have any doubts
Will this work for the Verizon model?
dimm0k said:
if you're willing to take on the risk then go ahead... I did and am still rooted. just ask questions if you have any doubts
Click to expand...
Click to collapse
Hey, I followed the instructions per your thread and successfully installed 10s and kept root! The bad news is that I did a factory reset immediately after and now it keeps bootlooping into TWRP. Any idea how to fix this? Sadly I didn't make a backup because my microsd card was too small and I didn't have the patience to wait til tomorrow and go out and buy one, really hope I didn't kick myself in the ass and brick my phone. :crying:
Edit:
I was able to find a fix by following these instructions:
"I had this happen to me after installing TWRP for the first time. It would keep rebooting to TWRP. This was after making sure I flashed SuperSU as well. Eventually in a moment of "might as well see what will happen" I rebooted then held down the power button and volume down. Got to the option if I wanted to factory reset my phone which I did which booted into TWRP. Rebooted to system from there which got me out of the TWRP Bootloop."
I also set my phone up again and can confirm that 10s is still good with root! Thanks for the guide and work, man. Much appreciated!

Categories

Resources