Hi, I have a problem with a ZTE BLADE A110 original phone from the company Digitel-Venezuela, try to unlock with sigmaBox which was satisfactory but it is in the logo, can not solve and little information will be obtained from this model ..
It does not enter recovery, it stays hung in the logo of android and it does not show the recovery, I tried to install some but it was not possible ..
Also intale another flash and change the logo of the company digitel but also still in the logo, I can not find what to do .....
I appreciate the help from beforehand ..
Regards!
reparcelim said:
It does not enter recovery, it stays hung in the logo of android and it does not show the recovery, I tried to install some but it was not possible ..
Click to expand...
Click to collapse
If you mean this . . .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You can enter recovery by holding down the Power button and press Volume up.
Also intale another flash and change the logo of the company digitel but also still in the logo, I can not find what to do .....
Click to expand...
Click to collapse
You need to change /system/media/bootanimation.zip. I have attached a stock ZTE version:
Related
The "RLS Lite" is not Recognizing my device, what do I do?
I am using the CM7 made by Quarx.
Have clicked on Show Device and nothing happens, only the device switches to USB mode and Portal Tools.
The version that came was the RETAIL:
Build: 4.5.2-50-51_DFL
Version of System: 45.2.500.MB526.Brasil.en.BR
Android 2.3.5
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You need to select boot loader on start up.
hold volume up and power keyo n start up and you will enter the bootloader mode.
Rsd Lite will recognize your device then !
kanpurite said:
You need to select boot loader on start up.
hold volume up and power keyo n start up and you will enter the bootloader mode.
Rsd Lite will recognize your device then !
Click to expand...
Click to collapse
The downgrade is always this way?
Thank you, was already in despair.
Orjakone said:
The downgrade is always this way?
Thank you, was already in despair.
Click to expand...
Click to collapse
Yes
Your device has to be in boot loader mode to be recognized by RSD Lite.
Hello there
I have Twrp installed in my zf5. The phone was switched off almost about 1 month. Now while booting up, only Red Bar is showing, nothing else. I can't open TWRP recovery also ( by volume and power button ) so i can install a new ROM.
Please help.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Same mate, same. The only difference is I can access TWRP(only twrp). Any solutions yet?
Same problem .Red Bar on screen. no fastboot mode no recovery mode.
Please solve our Issues XAD Team.
Thanks
Has anyone solved the issue with the RED BAR? How do I fix it?
Thanks!
mura20 said:
Has anyone solved the issue with the RED BAR? How do I fix it?
Thanks!
Click to expand...
Click to collapse
How does it look like?
same here, when bot this red bar appears and rom load normally, i locked the bootloader and the red bar disappears and show the intel logo, but when i unlock again the red bar appears
I never had this issue on my phone, I guess maybe you could try reflashing the bootloader? But why bother all this work if the device functions normally?
Hi
I had an open stock firmware on my LG G6. Unfortunetly I made factory reset as the phone was crashing apps.
Now the phone will boot into TWRP but flashing any of the firmwares is a failure.
First it was unable to unmount /system so i switched it to ext3 and back to ext4. Now the flash ends with result 1.0000 and after reboot im still in TWRP.
I can enter TWRP or start recovery with Vol Up, however in recovery it says with red MODIFIED / E / L / R0 / id :0 ()
I tried using LG UP but im stuck on this and none of the dll's seem to work for me.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How to proceed to unbrick it ?
None of the dll's worked for me. I've let this rest for a few days and then stupidly found solution when searching for an answer, some info that installing LG Bridge might solve the dll issue.
It appeared that there is a magic button which recovers all phone with one click on Recovery within LG Bridge software.
Just a question. Is it now safe to lock the boot loader so I can run android pay?
Hi to everyone. I am new to XDA. I have a problem with Tab 4. My friend wanted to flash custom rom but he is noob about this. So I took the tablet and flashed the custom rom with TWRP. Everything went smoothly until it is stuck at Samsung Galaxy Tab4 screen. I attached the photo where it was stuck. I want to boot into recovery but sadly, home button isn’t working at all. How can I boot into recovery? Please help me ASAP. I can’t do anything to it now. Sorry for bad English.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
bloatwarekiller said:
I attached the photo where it was stuck. I want to boot into recovery but sadly, home button isn’t working at all. How can I boot into recovery?
Click to expand...
Click to collapse
The tablet is bricked. After flashing twrp, there should be a message in the top left of the screen about set warranty bit. The picture you posted is missing the yellow text. That's bad. Try putting the tablet in odin download mode by holding the home and volume down button plus power. Then press volume up when prompted. If you can get into odin download mode, reflash the proper twrp and try again.
If you can't get the tablet into odin mode, jtag recovery is the only option, a very complicated procedure.
Hi friends,
I have a Galaxy A7(2016) SM-A7100 bought on Amazon and comes from Hong Kong.
I want to install a ROM with Android 10 or 11 and when I'm running Odin, I get this message on the phone:
Instalation Failure. You need to unlock your device to install a custom OS.
Do you know what I can do to unlock the phone and let me install the ROM?
Thank you very much for your answer
Hi, I think I have been able to fix the phone locking problem (I am not sure).
Now I have another problem, when Odin is doing the TRW download on the phone, it appears in red letters on the phone: Binary size is too large: recovery
After that the download stops and Odin shows FAIL in red letters.
What can I do?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Joanga said:
View attachment 5692423
Click to expand...
Click to collapse
I have been able to fix the problem
Joanga said:
I have been able to fix the problem
Click to expand...
Click to collapse
Now the problem I have is that the ROM I downloaded does not work on my A7(2016).
please, can someone tell me what ROM I can put on my A7(2016) SM-A7100 with Snapdragon.
Thank you very much