Related
now i'm using SE X2, but i got a big problem with SEUS when i wanna update my X2. After i had connected my x2 with SEUS successfully, finished downloading the new rom for X2 through SEUS, then it stoped, it didn't install new rom into my phone with the notice that the services was failed. I tried to reinstall seus but it still didn't work
Anyone helps me plz. thanks!
what windows do you use. is your pc strong enough to run SEUS, minimum specs are listed on the SE site? is your phone battery above 50%. test the usb cable if it works by transfering some data...
whoami9999 said:
now i'm using SE X2, but i got a big problem with SEUS when i wanna update my X2. After i had connected my x2 with SEUS successfully, finished downloading the new rom for X2 through SEUS, then it stoped, it didn't install new rom into my phone with the notice that the services was failed. I tried to reinstall seus but it still didn't work
Anyone helps me plz. thanks!
Click to expand...
Click to collapse
I have 2 PC's: 1 is a tablet laptop from HP (Vista 32bit), 1 is a desktop from Acer (Vista 64bit). The HP is high-usage, all sorts of crap on it. The Acer is low-usage, Media PC.
First few times I tried upgrading firmware (or reloading after a phone-hangup), I had to use the Acer, because every time I tried updating via the HP, ...it would run the progress bar ALL the way through the process to the end (right side of the bar), then give an error stating that the update failed.
A couple weeks ago, I did a reload again, and thought I'd give the HP a shot at it one more time. This time, it failed exactly the same way, but for some reason, I accidentally booted the phone.....and it was fine (did the whole new-setup as expected).
So, moral of the story:
--If the SEUS site isn't working for you, try another PC.
--If you have no other PC and the SEUS site is saying it's not working, don't believe it and try booting your phone anyway.
(I have a feeling that it never updates the bootloader, and that's in a separate memory space. So, you'd probably have to go out of your way to corrupt the phone so bad that you wouldn't be able to hook-up the bootloader with the SEUS site and try again.)
Hi whoami9999,
Just try it once again after stopping / disabling your anti virus and firewall.. And one more thing, don't forget to re-enable it after checking!
Regards,
Sujith
Hello, today I got my Amazon Kindle Fire! After starting an connecting to my Wifi network, I made an update, wich was available! But after installing the update I can´t find any Wifi-network! Also tried the factory reset, but didn´t work!
Can anybody help me? Is it possible to downgrade or something else??
Thx Chris
masterc1111 said:
Hello, today I got my Amazon Kindle Fire! After starting an connecting to my Wifi network, I made an update, wich was available! But after installing the update I can´t find any Wifi-network! Also tried the factory reset, but didn´t work!
Can anybody help me? Is it possible to downgrade or something else??
Thx Chris
Click to expand...
Click to collapse
Try contacting tech support they might have something for you to flash. And if they do, you should post the files and process here. Unfortunately without solid kernel, or recovery information there's little we can do.
Sent from my SPH-D710 using xda premium
Hopefully, cause I don´t want send it back
After chatting with Amazon, the problem wasn´t solved! But I looked a bit more on the Amazon Homepage and found where I can download the Software Update to 6.1:
Download Link
And here is the instruction:
http://www.amazon.com/gp/help/customer/display.html/ref=hp_k6_updatesi?nodeId=200790620
I will try it now and report what happends!
I think you already have that don't you?
When I got my KF, it immediately before I did anything updated to that version.
Code:
Current Version 6.1_user_2017120
Yes I have the one but I´ll try to run the update again manuelly, or do you think t wont work?
Masterc, didn't you say in another thread that you are in Austria?
You should mention that here if it is the case as it might affect the responses you get.
Yes thats true, but Wifi worked before I downloaded and installed the update! It also showed my name... the Amazon support told me it should work abroad..
I tried to install the update again, but it didn´t solve the problem.
So after playing around a while, the network pops up (yeahh) but when I enter the (right) passwort it always shows:
Error in conncection
unable to connect to selected access point. Please check the password you have provided
the kindle found my hotspot from my galaxy note (without password) and it connected just one time for arround 10 seconds..
Now I can´t connect again... quite intressting
Hopefully it is not the hardware - but I don´t think so otherwise I couldn´t download the update.
So, newer versions of Samsung Smart Switch do not offer the option for "Device Initialization" anymore.
How can I do a similar procedure apart from an Odin stock image flash?
I tried Odin stock image flash, but could not get totally unrooted that way. And was hoping to get clean unroot by using Smart Switch.
Any way to get the Device Initialization done in Smart Switch? Or does anyone have the older Smart Switch install files?
Thanks!
http://www.filehorse.com/download-samsung-smart-switch/30860/
This one worked for me. Just don't update when you open it. Regardless of the pop up that says device initialization is no longer available, it is.
The device initialization function was removed in the latest version of Smart Switch because it was exploited too much for debranding.
Here's the official download link for the last version with device initialization function:
downloadcenter.samsung.com/content/SW/201706/20170601113339558/Smart_Switch_PC_Setup.exe
MrYoan said:
This one worked for me. Just don't update when you open it. Regardless of the pop up that says device initialization is no longer available, it is.
Click to expand...
Click to collapse
this help me a lot. thanks for the link:fingers-crossed:
Thanks for the link to the version with initialise!
I downloaded it and tried to do the initialisation process but after putting in my details it said "SM-G935FD" does not support initialising?
Do you know another way to initialise other than flashing a stock rom in ODIN as so far every rom I've tried gets stuck in boot loops.
Any help would be greatly appreciated! Thanks
Elektryx said:
Thanks for the link to the version with initialise!
I downloaded it and tried to do the initialisation process but after putting in my details it said "SM-G935FD" does not support initialising?
Do you know another way to initialise other than flashing a stock rom in ODIN as so far every rom I've tried gets stuck in boot loops.
Any help would be greatly appreciated! Thanks [/
It appears samsung has blocked it. Recent versions of smart switch automatically update to newest version and older versions installation always fails. I've tried many.
Click to expand...
Click to collapse
elv1503 said:
Elektryx said:
Thanks for the link to the version with initialise!
I downloaded it and tried to do the initialisation process but after putting in my details it said "SM-G935FD" does not support initialising?
Do you know another way to initialise other than flashing a stock rom in ODIN as so far every rom I've tried gets stuck in boot loops.
Any help would be greatly appreciated! Thanks [/
It appears samsung has blocked it. Recent versions of smart switch automatically update to newest version and older versions installation always fails. I've tried many.
Click to expand...
Click to collapse
Now I also get the error message, that my SM-G930F does not support initialising even though it worked before, so Samsung must have really blocked it. ODIN is the only way to do this now.
Click to expand...
Click to collapse
Samsung completely removed this feature... Cannot find fw on the server. This feature is over. The only way is ODIN or something paid. Restrictions, restrictions, restrictions everywhere......
This really sucks since Odin does not completely restore everything.
After having the bluetooth share problem come up on my phone due to max bluetooth connections (I managed to successfully root the phone and delete the entries to get it working again the last time on S5) I tried again to root my phone which was unsuccessful and messed it up. After trying a few times to get the correct ROM which is hard to get as theres nowhere official to get it from (that I know of) and downloading is slow. Now its in boot loop. Spent time for 3 days running to sort out this issue and now they've completely taken out the potential way to solve it. I guess on my next upgrade I'll look into other options, to think they haven't solved the bluetooth share issue after all this time I think is just crazy.
So why samsung is not focus on this issue and does not try to solve ....and in other side samsung kies say this device not supported and samsung smart switch says unsupported device so what is this ??both are made by samsung and this type of error faces many many users in the world and you can see a lots of video on you tube but there is no any appropriate answer
This move is absolutely against developers who try to use androids more than just what Samsung intends them to. Definitely not satisfied, it was my only way of recovery because my old backups don't work because of frequent updates.
Hey, got to this thread today, I'm just leaving my bit for other souls that come by... I had this same msg on my A9, tried the Smart Switch but no way... then I just started good and old Odin 3.13.3 and started the process: the device responded and accepted the flash !!!
FernandoK said:
Hey, got to this thread today, I'm just leaving my bit for other souls that come by... I had this same msg on my A9, tried the Smart Switch but no way... then I just started good and old Odin 3.13.3 and started the process: the device responded and accepted the flash !!!
Click to expand...
Click to collapse
Thanks!!!!, the same for an A50, SM-A505FN.
No device "initialization" tab on Smart Switch? > BUT ODIN STILL WORKS
Hello everyone;
I found this thread a few hours ago, when I was trying to fix my Samsung phone.
I just want to confirm that flashing stock ROM with Odin works even if you have the "“An error has occurred while updating the device software. Use the emergency recovery function in the Smartswitch PC Software”" screen.
Raisagvs said:
No device "initialization" tab on Smart Switch? > BUT ODIN STILL WORKS
Hello everyone;
I found this thread a few hours ago, when I was trying to fix my Samsung phone.
I just want to confirm that flashing stock ROM with Odin works even if you have the "“An error has occurred while updating the device software. Use the emergency recovery function in the Smartswitch PC Software”" screen.
Click to expand...
Click to collapse
Thanks,
this worked for me,
didn't know Odin still works
Raisagvs said:
No device "initialization" tab on Smart Switch? > BUT ODIN STILL WORKS
Hello everyone;
I found this thread a few hours ago, when I was trying to fix my Samsung phone.
I just want to confirm that flashing stock ROM with Odin works even if you have the "“An error has occurred while updating the device software. Use the emergency recovery function in the Smartswitch PC Software”" screen.
Click to expand...
Click to collapse
Can you teach me how to do that sir.
You can also try another Samsung application, if I remember correctly, many additional features have been added recently. https://www.huuq.net/samsung-flow-download-for-windows/
Hello, recently I tried to flash my phone in flashtool and always stuck at "reading device information", even xperia companion can't detect it !
I re-installed all drivers, tried old versions of flashtool and firmware but always the same problem.
My phone is rooted but I don't know about bootloader. Any help? suggestions?
Thanks
You should probably ask moderators to deleted this since it's already under help section as well.
Hey! This is my first time here, sorry if I'm doing smth wrong, I just really need help. My fossil gen 6 is kinda useless at this point after updating to Wear OS 3 and I would like to flash it back to Wear OS 2, since I don't get any notifications & I can't even sync my notes at this point without connecting to wifi (not even through mobile data, which is pretty annoying -> my phone & watch doesn't connect to each other through bluetooth)
thanks, for any guides in advance!
night
You will have to perform a factory reset and repair the watch and phone again. Only option at the moment.
edwin270 said:
You will have to perform a factory reset and repair the watch and phone again. Only option at the moment.
Click to expand...
Click to collapse
Did that 3 times already, nothing changed. Thanks for your answer though!
Did you get anywhere with this? I also want to go back to wear os 2. I hate the fossil app
I'd like to know too. I just came back to Android with the S23 Ultra and wanted to pair my Razer x Fossil watch to it. But I decided to update since I was doing a factory reset/disconnect anyways. Big big BIG mistake.
There has to be a way to flash wear OS 2.3 back to the watch and re partition it as stock. I'm able to see my watch as a USB perhp on my machine without BT or wifi connection.
Anyone have the old firmware for these watches? Short of buying another Razer watch for $600
I do have all the required files to go back to wearOS 2, but wont suggest it might brick your device. Have a partition backup first.
For OTA add the hash in the placeholder.
Main URL: https://redirector.gvt1.com/packages/data/ota-api/package/<hash_with_extension_here>
v2.30: 230d380c72f87f94cbd4e43b944afd70700d6ffd.zip (Apply updates from playstore regarding wearOS to get it upto 2.38)
Minor Update: 4e201fee66e76ed4694e77eaa589f7767f93beea needs to applied after flashing the above package.
V3: a569fe07dfdcb4edea85f9535d592b9af4621cd1.zip
Malvik said:
I do have all the required files to go back to wearOS 2, but wont suggest it might brick your device. Have a partition backup first.
For OTA add the hash in the placeholder.
Main URL: https://redirector.gvt1.com/packages/data/ota-api/package/<hash_with_extension_here>
v2.30: 230d380c72f87f94cbd4e43b944afd70700d6ffd.zip (Apply updates from playstore regarding wearOS to get it upto 2.38)
Minor Update: 4e201fee66e76ed4694e77eaa589f7767f93beea needs to applied after flashing the above package.
V3: a569fe07dfdcb4edea85f9535d592b9af4621cd1.zip
Click to expand...
Click to collapse
Hey ! Thanks for the file. I'll take the risk to brick my watch.
Do you know how I can flash the archive ?
MiamKebab said:
Hey ! Thanks for the file. I'll take the risk to brick my watch.
Do you know how I can flash the archive ?
Click to expand...
Click to collapse
I'm also looking to be able to flash my watch between WearOS 2 and 3. Have you figured anything out by chance? All the things I normally do aren't working, with and without TWRP.
Malvik said:
I do have all the required files to go back to wearOS 2, but wont suggest it might brick your device. Have a partition backup first.
For OTA add the hash in the placeholder.
Main URL: https://redirector.gvt1.com/packages/data/ota-api/package/<hash_with_extension_here>
v2.30: 230d380c72f87f94cbd4e43b944afd70700d6ffd.zip (Apply updates from playstore regarding wearOS to get it upto 2.38)
Minor Update: 4e201fee66e76ed4694e77eaa589f7767f93beea needs to applied after flashing the above package.
V3: a569fe07dfdcb4edea85f9535d592b9af4621cd1.zip
Click to expand...
Click to collapse
Or would you be able to provide some guidance on how to proceed?
Arkbird1000 said:
I'm also looking to be able to flash my watch between WearOS 2 and 3. Have you figured anything out by chance? All the things I normally do aren't working, with and without TWRP.
Click to expand...
Click to collapse
From what I found, the original cable with 4 spins (2 on each side) should be used to connect your watch to a PC and use the USB debugging.
So I bought one but nothing happened. I'm just able to use Bluetooth or WiFi debugging and these can't be used to unlock the bootloader as WiFi and Bluetooth are disabled on bootloader mode. So fastboot can't detect the watch.
So I'm stuck and that sucks, my duck.
Another way is to remove the watch's back and tweak the USB connectors but I'll not do that...
MiamKebab said:
From what I found, the original cable with 4 spins (2 on each side) should be used to connect your watch to a PC and use the USB debugging.
So I bought one but nothing happened. I'm just able to use Bluetooth or WiFi debugging and these can't be used to unlock the bootloader as WiFi and Bluetooth are disabled on bootloader mode. So fastboot can't detect the watch.
So I'm stuck and that sucks, my duck.
Another way is to remove the watch's back and tweak the USB connectors but I'll not do that...
Click to expand...
Click to collapse
I see. I have been able to make it farther, but I also was running into problems getting the USB connection to work. Most of what I did was under Linux instead of Windows but I found that after enabling USB debugging I often had to remove the watch from the cradle, put it back on, then run 'adb devices' from the connected computer to get the daemon going. That usually got the adb popup on the watch to show, then I can select the 'always allow' option.
All that said, at the moment I'm not currently able to boot my watch unless I have the bootloader unlocked. I have restored the stock recovery after using TWRP and unsuccessfully flashing anything via that adb shell or from the bootloader with fastboot. Even worse, some things are not working properly, such as automatic brightness and some of the wireless capabilities. I might need to see if I can work something out with Fossil if I'm unable to resolve these issues.
You guys seems way ahead on me in the downgrade process...
I made Wear OS 3 update but the Fossil app used to pair the watch won't work with Oneplus 8 Pro (Android 13), gotta go back but i have no idea how...
Yet i flashed a lot of custom roms and stuff in the past, but now.. kinda lost
Im looking forward to see news here
Good luck guys, i'll keep updated if i somehow manage to flash the OTA posted ahead
Edit : well i was on Apkmirror to try an older apk of the app, and found out their app targets android 12 but not android 13..........
Arkbird1000 said:
I see. I have been able to make it farther, but I also was running into problems getting the USB connection to work. Most of what I did was under Linux instead of Windows but I found that after enabling USB debugging I often had to remove the watch from the cradle, put it back on, then run 'adb devices' from the connected computer to get the daemon going. That usually got the adb popup on the watch to show, then I can select the 'always allow' option.
All that said, at the moment I'm not currently able to boot my watch unless I have the bootloader unlocked. I have restored the stock recovery after using TWRP and unsuccessfully flashing anything via that adb shell or from the bootloader with fastboot. Even worse, some things are not working properly, such as automatic brightness and some of the wireless capabilities. I might need to see if I can work something out with Fossil if I'm unable to resolve these issues.
Click to expand...
Click to collapse
I do have the TWRP but need to find it, took some tweaks from Ticwatch 3 pro. I didnt pushed it on the repo tho. I didnt what made me do it, but I wiped my system partitions and had to rebuilt from the OTA only. But after getting the watch working again, I had few functionalities broke, including the OTA updates. If you can social enginner your way thru fossil to get files such as stock rom and other files for qualcomm software like rawprogrammer and firehose files it can be great help.