Hi all,
I was trying to unroot my phone by simply loading the sappimg.zip which would have worked but it was for the vodafone version. Now my phone boots with the vodafone logo and stays there. I have access to hboot and fastboot, no recovery.
Sapphire Unknown 32A Ship S-ON H
Hboot-1.33.0009
CPLD-13
Radio-3.22.20.17
May 8 2009, 21:02:32
also it only loads the vodafone sappimg, others say "main version is older"
Download my fastboot commander from my signature and post here all device info.
###Calling fastboot with: getvar version-bootloader###
version-bootloader: 1.33.0009
finished. total time: -0.000s
********************************
###Calling fastboot with: getvar version-baseband###
version-baseband: 3.22.20.17
finished. total time: 0.000s
********************************
###Calling fastboot with: getvar version-main###
version-main: 2.16.151.1
finished. total time: 0.000s
********************************
###Calling fastboot with: getvar cid###
cid: T-MOB010�Ò˜"
finished. total time: -0.000s
********************************
###Calling fastboot with: getvar version-cpld###
version-cpld: 13
finished. total time: 0.010s
********************************
###Calling fastboot with: getvar product###
product: sapphire
finished. total time: -0.000s
********************************
###Calling fastboot with: getvar mid###
mid: SAPP31000
finished. total time: 0.000s
********************************
###Calling fastboot with: getvar security###
security: on
finished. total time: -0.000s
********************************
###Calling fastboot with: getvar build-mode###
build-mode: SHIP
finished. total time: 0.010s
********************************
###Calling fastboot with: flash radio C:\android-sdk-windows-1.5_r3\tools\radio.img###
sending 'radio' (21504 KB)... OKAY [ 6.915s]
writing 'radio'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 13.629s
********************************
Follow this guide and you should be ok: http://forum.xda-developers.com/showthread.php?t=734617
whenever I put that sappimg.zip on my phone it freezes at the unzipping. What do I do?
Ok I finally figured out how to fix it
On the red Vodafone screen, its waiting for you to input commands, put in these commands:
fastboot erase boot
fastboot erase system -w
fastboot erase recovery
now when you try to apply the 60.7mb sappimg.zip, it will work
next flash the special sappimg.zip on most root tutorial's
Then you work your way from there....
Thanks for your help though, much appreciated
I have a similar issue but my mt3g say remote partition is not existed when i bootfast erasing system-w. how do I correct it?
Hi!
I think my phone is bricked... or semi-bricked.
I was using eyegor's radio switcher to switch SPL/Radio/Recovery every time I was changed the rom. I used:
hboot-1.33.2010OldSPL.img
Radio_HTC_PVT_32A_3.22.20.17OldRadio.img
recovery-RA-magic+-v2.2.1-bladyle
everything was nice, but my battery started to die... every day I had to charge it. So I bought a new battery and I thought, it would be nice to be formatted with a stock rom. So I started to install RUU_Sapphire_HTC_Europe_3.05.401.1_test_signed_NoDriver.exe (what I installed the same way like before with success). When it got to update RADIO_V2 my screen goes black and the update failed.
Now when I try to turn the phone on (showing me the same with POWER; BACK+POWER; HOME+POWER; VOL_DOWN+POWER), says:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0008 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
I can access fastboot from computer, but adb not. I searched all over the internet to find solution to this.
Code:
fastboot oem boot
gives me in output:
Code:
...
(bootloader) setup_tag addr=0xA0000100 cmdline add=0x8F083CA4
(bootloader) TAG:Ramdisk OK
(bootloader) TAG:smi ok, size = 32
(bootloader) TAG:hwid 0x1
(bootloader) TAG:skuid 0x21401
(bootloader) TAG:hero panel = 0x0
(bootloader) TAG:engineerid = 0x2
(bootloader) Device CID is not super CID
(bootloader) CID is VODAPC23
(bootloader) setting.cid::VODAPC23
(bootloader) serial number: HT95XKF02109
(bootloader) commandline from head: no_console_suspend=1 console=null
(bootloader) command line length =365
(bootloader) active commandline: board_sapphire.disable_uart3=0 board_sap
(bootloader) phire.usb_h2w_sw=0 board_sapphire.disable_sdcard=0 smisize=3
(bootloader) 2 androidboot.baseband=3.22.20.17 androidboot.cid=VODAPC23
(bootloader) androidboot.carrier=COMMON androidboot.mid=SAPP10000 android
(bootloader) boot.keycaps=qwerty androidboot.mode=normal androidboot.seri
(bootloader) alno=HT95XKF02109 androidboot.bootloader=1.76.0008 no_consol
(bootloader) e_suspend=1 console=null
(bootloader) aARM_Partion[0].name=misc
(bootloader) aARM_Partion[1].name=recovery
(bootloader) aARM_Partion[2].name=boot
(bootloader) aARM_Partion[3].name=system
(bootloader) aARM_Partion[4].name=cache
(bootloader) aARM_Partion[5].name=userdata
(bootloader) partition number=6
(bootloader) Valid partition num=6
(bootloader) 69466957
(bootloader) 69784520
(bootloader) 7473
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
(bootloader) 0
FAILED (status read failed (Too many links))
finished. total time: 8.454s
after 2-3 minutes brings up the old rom, but at the beginning force closes and restarts
I tried to install other ruu-s but with no success. I created a goldcard, tried to flash sappimg.zip from RUU_Sapphire_HTC_Europe_2.16.401.6_Vodafone_CZ_release_signed_NoDriver.exe but it fails at the very beginning with "43 main version check fail".
mumilover's fastboot commander's output:
Code:
###Calling fastboot with: getvar version-bootloader###
version-bootloader: 1.76.0008
finished. total time: 0.002s
********************************
###Calling fastboot with: getvar version-baseband###
version-baseband: 3.22.20.17
finished. total time: 0.004s
********************************
###Calling fastboot with: getvar version-main###
version-main: 3.05.401.1
finished. total time: 0.001s
********************************
###Calling fastboot with: getvar cid###
cid: VODAPC23âSÐ
finished. total time: 0.001s
********************************
###Calling fastboot with: getvar version-cpld###
version-cpld: 12
finished. total time: 0.001s
********************************
###Calling fastboot with: getvar product###
product: sapphire
finished. total time: 0.000s
********************************
###Calling fastboot with: getvar mid###
mid: SAPP10000
finished. total time: 0.001s
********************************
###Calling fastboot with: getvar security###
security: on
finished. total time: 0.000s
********************************
###Calling fastboot with: getvar build-mode###
build-mode: SHIP
finished. total time: 0.001s
********************************
I saw mumilover helped to someone with almost the same problem, maybe he or someone can help me.
So it can't be solved...
If someone in Serbia can JTAG, I would be send to him/her and pay for it...
Don't know why I was thinking like a noob... a had already extracted the RUU_Sapphire_HTC_Europe_3.05.401.1_test_signed_NoDriver.exe and I always tried to flash only the rom.zip which failed at radio update. So now I tried to flash the other zip... rom1.zip
Now I have working hboot, fastboot and a system which I cant access
It looks like no one can help me...
I tried to make a goldcard, with two cards. The first was 4gb Kingston sdcard and the second one is a noname 512mb sdcard. Without my goldcards I get Model ID error. With the goldcard inserted (never mind which one) I pass this check, but fails at main version check. I read on many forums and tutorials how to make a goldcard... On these sites I found many answers. Someone says the goldcard is good when passes the Model ID check. But there are a few responds where they say they can pass the main version check... Somewhere on this forum with almost the same problem (SPL/Radio mismatch) someone wrote that he had to make three goldcards to pass the main version check, but with first two he passed only the Model ID check...
Now I'm a little bit confused... I would appreciate if someone can confirm that the goldcard is then a good goldcard when it can pass the main version check (in RUU - ERROR 140 - BOOTLOADER VERSION ERROR).
If someone confirms this I will buy more sdcard (because I bought my phone without a sdcard (for those sdcards which comes with the phone everyone says these are good for creating a goldcard (said on the forums)) before two years)...
... and sorry for my really bad english
more than 140 views and no one replied...
wondering...
if XTC Clip can help me?
I wrote you a pm.
"Main version is older" is not something which a goldcard can fix...
But we can fix that :0)
We just need to get into the system, flash a different misc partition and you should be able to flash a different ruu file.
Once we have a matching spl/radio combo, we can flash a different combo matching your device (32A).
I have to say... many thanks to mumilover, because he wanted to help me. I told him in Monday that I ordered a XTC Clip by Raskal and I want to try it first... Today I got the Clip and successfully unlocked it... it said S-OFF and showed in fastboot:
before:
SAPPHIRE PVT 32A ENG S-ON H
HBOOT-1.76.0008 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
after:
SAPPHIRE PVT 32A ENG S-OFF H
HBOOT-1.76.0008 (SAPP*****)
CPLD-12
RADIO-3.22.20.17
downloaded the original ROM, which was for me RUU_Sapphire_HTC_Europe_2.16.401.6_Vodafone_CZ_release_signed_NoDriver because of my phone was VODAPC23... now in fastboot with command:
fastboot oem boot
it gives me "CID is super CID" and "setting.cid::11111111"
when the unlock succeeded I type in cmd:
fastboot oem rebootRUU
unpacked, the downloaded RUU and installed the "update"(downgrade):
fastboot flash zip rom.zip
everything went well! So now my phone works like new, but it is unlocked If someone will have same problem I suggest to buy a XTC Clip from Raskal...
Anyway, how can I make it solved?
How did you do it?
I have the same issue. My phone is stuck in ruu mode. I have an xtc clip but when I try it, it does nothing. I assume its because the phone is still stuck in ruu mode but how do I get it out of ruu mode?
Can you help me?
SPL and Radio are exactly as above.
Thanks.
Here is my exact device info.
...........................................................
Operating system: Windows.
Tools folder and fastboot file(s) created.
The folder containing the IMG files was not found.
No Nandroid folder was not found - "Restore" button disabled.
STARTING PRINT OF DEVICE INFO.
-----------------------------------.
SPL/hboot version: 1.76.0008.
Radio version: 3.22.20.17.
Main software version: 3.05.401.1.
cid: roger001.
cpld: 12.
product: sapphire.
mid: sapp50000.
security: on.
build-mode: ship.
-----------------------------------.
Print of device info SUCCESSFUL.
This device does not have s-off nor eng hboot.
To get into fastboot/hboot and get rid of ruu screen:
1.a. Download RUU_Sapphire_HTC_Europe_3.05.401.1_test_signed_NoDriver.exe and extract it.
Find rom.zip and rom1.zip files
1.b. Or download rom.zip and rom1.zip
2. Put these zip files in the same folder where is fastboot.exe
3. Connect your phone to PC in RUU mode
4. Run the commands from the same directory:
Code:
fastboot oem rebootRUU
fastboot erase cache
fastboot flash zip rom.zip
This will fail. Disconnect the phone, get the battery out for 10secs, put back and connect to PC.
Code:
fastboot oem rebootRUU
fastboot erase cache
fastboot flash zip rom1.zip
This will be successfully installed. And now you have fastboot/hboot. In XTC Clip make the goldcard. Put the card in the phone and power on with VOLUME_DOWN+POWER.
jeBACH said:
To get into fastboot/hboot and get rid of ruu screen:
1.a. Download RUU_Sapphire_HTC_Europe_3.05.401.1_test_signed_NoDriver.exe and extract it.
Find rom.zip and rom1.zip files
1.b. Or download rom.zip and rom1.zip
2. Put these zip files in the same folder where is fastboot.exe
3. Connect your phone to PC in RUU mode
4. Run the commands from the same directory:
Code:
fastboot oem rebootRUU
fastboot erase cache
fastboot flash zip rom.zip
This will fail. Disconnect the phone, get the battery out for 10secs, put back and connect to PC.
Code:
fastboot oem rebootRUU
fastboot erase cache
fastboot flash zip rom1.zip
This will be successfully installed. And now you have fastboot/hboot. In XTC Clip make the goldcard. Put the card in the phone and power on with VOLUME_DOWN+POWER.
Click to expand...
Click to collapse
Thanks.
I figured this out last night but thanks anyway.
Just to add, to get back to a bootable system, I had to flash another rom after completing the above steps.
Is there a way to get the Tom and rom1 rehosted? If not where can i get it from?
tlipur said:
Is there a way to get the Tom and rom1 rehosted? If not where can i get it from?
Click to expand...
Click to collapse
You can get the ROM from HTC Dev. You need to sign up for an HTC Dev account and then go to the HTC bootunlocker page (you have to google as I'm not allowed to post the link). You can download the RUU there and then once downloaded open the file and when its open go to %temp% (or your temp file directory) and find the most recent modified folder. Inside of there you will find another folder which will contain, amongst other things rom[1].zip file(s).
rom.zip
rom1.zip
Awesome thanks
Sent from my GT-P7510 using Tapatalk 2
I started with the tmobile fender mytouch LE 3g stock
successfully rooted w/ custom recovery and rom I flashed a different version of SPL/RADIO for a new custom rom
now no recovery and no boot... RUUmode
I have been working on this issue for 6 months. If I had to guess I would say that it has something to so with the system portion of the flashing since that is where the flashing process "freezes"--RUU/ or goldcard.
I read here 7th post down http://forum.xda-developers.com/showthread.php?t=1231297something about "getting into the system partition...
Device Info
Code:
Operating system: Windows.
Tools folder found.
Windows fastboot tools found.
No Nandroid folder was not found.
The folder containing the img files was not found.
No Nandroid folder was no found - "Restore" button disabled
STARTING PRINT OF DEVICE INFO.
---------------------------------.
SPL/hboot version:1.76.0008
Radio version: 6.35.08.29.
Main software version: 3.05.631.7
cid: t-mob010
cpid: 13.
product: sapphire.
mid: sapp31000
security: on.
build-mode: ship
----------------------------------.
Print of device info SUCCESSFUL
This device does not have s-off nor eng hboot.
ARE YOU SURE THAT THIS IS THE RIGHT TOOL FOR YOU?.
Code:
###Calling fastboot with: getvar version-bootloader###
********************************
###Calling fastboot with: getvar version-bootloader###
version-bootloader: 1.76.0008
finished. total time: -0.000s
********************************
###Calling fastboot with: getvar version-baseband###
version-baseband: 6.35.08.29
finished. total time: 0.000s
********************************
###Calling fastboot with: getvar version-main###
version-main: 3.05.631.7
finished. total time: 0.000s
********************************
###Calling fastboot with: getvar cid###
cid: T-MOB010ÐÕËX
finished. total time: 0.000s
********************************
###Calling fastboot with: getvar version-cpld###
version-cpld: 13
finished. total time: -0.000s
********************************
###Calling fastboot with: getvar product###
product: sapphire
finished. total time: -0.000s
********************************
###Calling fastboot with: getvar mid###
mid: SAPP31000
finished. total time: -0.000s
********************************
###Calling fastboot with: getvar security###
security: on
finished. total time: 0.000s
********************************
###Calling fastboot with: getvar build-mode###
build-mode: SHIP
finished. total time: -0.000s
********************************
I have tried everything, and nothing works.
My main problem is this :
Main software version: 3.06.631.7.
phone is always in ruu mode or ruu usb when i plug in the usb cable.
only fastboot working no adb.
if anyone can help me with this problem I would be very grateful.
............................................................
Operating system: Windows.
Tools folder and fastboot file(s) created.
The folder containing the IMG files was not found.
No Nandroid folder was not found - "Restore" button disabled.
STARTING PRINT OF DEVICE INFO.
-----------------------------------.
SPL/hboot version: 1.76.0008.
Radio version: 6.35.08.29.
Main software version: 3.06.631.7.
cid: vodapc23.
cpld: 12.
product: sapphire.
mid: sapp10000.
security: on.
build-mode: ship.
-----------------------------------.
Print of device info SUCCESSFUL.
This device does not have s-off nor eng hboot.
ARE YOU SURE THAT THIS IS THE RIGHT TOOL FOR YOU?.
###Calling fastboot with: getvar version-bootloader###
version-bootloader: 1.76.0008
finished. total time: 0.036s
********************************
###Calling fastboot with: getvar version-baseband###
version-baseband: 6.35.08.29
finished. total time: 0.002s
********************************
###Calling fastboot with: getvar version-main###
version-main: 3.06.631.7
finished. total time: 0.001s
********************************
###Calling fastboot with: getvar cid###
cid: VODAPC23hŦ,
finished. total time: -0.000s
********************************
###Calling fastboot with: getvar version-cpld###
version-cpld: 12
finished. total time: 0.001s
********************************
###Calling fastboot with: getvar product###
product: sapphire
finished. total time: 0.001s
********************************
###Calling fastboot with: getvar mid###
mid: SAPP10000
finished. total time: 0.001s
********************************
###Calling fastboot with: getvar security###
security: on
finished. total time: 0.001s
********************************
###Calling fastboot with: getvar build-mode###
build-mode: SHIP
finished. total time: 0.001s
********************************
this information i get with mumilover Fastboot Commander v.1.51
Anyone ???
mumilover fixed it. :good:
phone is stuck in RUU / RUU USB mode
ruu always freezes when loading system.img
not able to get into fastboot mode,
however fastboot can communicate with phone
but flashing anything always fail
used fastboot commander
flashing fails or gets too many links or img not supported
heres what my phone says:
SAPPHIRE PVT 32A SHIP S-OFF H
HBOOT 1.76.0010 (SAPP******)
CPLD-10
RADIO 6.35.10.18
JAN 14 2010 14:58
RUU
i know the is cid111111
no combo of buttons changes how the phone turns on.
no body wants to take a crack at this one?
also when i run fastboot getvar version-main
i get 2.16.707.3
I have a similar problem
I have tried everything, and nothing works.
My main problem is this :
Main software version: 3.06.631.7.
phone is always in ruu mode or ruu usb when i plug in the usb cable.
only fastboot working no adb.
if anyone can help me with this problem I would be very grateful.
.................................................. ..........
Operating system: Windows.
Tools folder and fastboot file(s) created.
The folder containing the IMG files was not found.
No Nandroid folder was not found - "Restore" button disabled.
STARTING PRINT OF DEVICE INFO.
-----------------------------------.
SPL/hboot version: 1.76.0008.
Radio version: 6.35.08.29.
Main software version: 3.06.631.7.
cid: vodapc23.
cpld: 12.
product: sapphire.
mid: sapp10000.
security: on.
build-mode: ship.
-----------------------------------.
Print of device info SUCCESSFUL.
This device does not have s-off nor eng hboot.
ARE YOU SURE THAT THIS IS THE RIGHT TOOL FOR YOU?.
###Calling fastboot with: getvar version-bootloader###
version-bootloader: 1.76.0008
finished. total time: 0.036s
********************************
###Calling fastboot with: getvar version-baseband###
version-baseband: 6.35.08.29
finished. total time: 0.002s
********************************
###Calling fastboot with: getvar version-main###
version-main: 3.06.631.7
finished. total time: 0.001s
********************************
###Calling fastboot with: getvar cid###
cid: VODAPC23hŦ,
finished. total time: -0.000s
********************************
###Calling fastboot with: getvar version-cpld###
version-cpld: 12
finished. total time: 0.001s
********************************
###Calling fastboot with: getvar product###
product: sapphire
finished. total time: 0.001s
********************************
###Calling fastboot with: getvar mid###
mid: SAPP10000
finished. total time: 0.001s
********************************
###Calling fastboot with: getvar security###
security: on
finished. total time: 0.001s
********************************
###Calling fastboot with: getvar build-mode###
build-mode: SHIP
finished. total time: 0.001s
********************************
this information i get with mumilover Fastboot Commander v.1.51
Anybody still following this thread ?
yes, can you help?
It's easy to fix..
Locate one of the open hboots (i have a list somewhere.. just search for my name)
Flash it using fastboot commander, zip tab.
Unlock it using this link: http://htcdev.com/bootloader
Flash custom recovery
Flash eng hboot
Have complete freedom :0)
can any help with my situation?