Help with my Samsung E500M. - Galaxy E5, E7 Q&A, Help & Troubleshooting

Hi.
a year ago I wanted to root my phone, i installed twrp but my wrong i after installed twrp, to restar,
i select option in twrp "install SU " and my phone dont start.
the display dnt turn on. i try turn in on in download mode but only vibrate.
after vibrate, i connect in my laptop with Odin, and hes detect and try flash but stay bug in "SetupConnection"
any suggestions?
Thanks u

Related

Cannot install Recovery.

Hi all,
I am not sure whether this the right forum to post my query. It's been a year a since I bought my S4 (i9500) so O thought of rooting and installing recovery on my phone. I was on stock 4.4.2 and I was able to root my phone using the CF-AUTOROOT, but after that when i am trying to flash a custom recovery using Odin it ends up in the download mode. I have disabled knox after rooting the phone and my phone status is now custom and so I cannot get any official update.Is there anything I did wrong which is forcing the download mode to overwrite the custom recovery I am tryjng to install???? Any help is highly appreciated.
Thank you,
Bobby Thomas.
Just boot into download mode. Uncheck auto-reboot in Odin and flash the recovery. That's it.
Thanks Lenny for your prompt reply, actually I did try that but after the manual boot it again goes back to the download mode instead of recovery mode....I even tried to install it through ADB shell but with no luck...I just goes to the download mode whatever I tried to do...
I was having a problem with the system trying to enforce the stock recovery every time I flashed TWRP through Odin. Turns out I got it by simply removing the battery as soon as Odin finished the job and restarted my phone. Waited for a few seconds, put battery back on and voila.
It worked for me. Do it at your own risk.
I also had the same trouble and had to untick auto-reboot, take out battery reboot back into download mode flash again. The first time I tried that it didnt work and the only way I got it to work was you Cyanogens windows installer, then went into recovery and flash the rom of choice.
What happens when you boot your phone, download terminal emulator from the market (or use adb) and type the following:
su
reboot recovery

Help installing recovery

Hi, just bought an S5 G900F (international version)... and i wanted to install a custom recovery than root.. than flash rom. Im experienced in this matter... but ... im having all sorts of odd problems. I tried several reocvery (openrecovery, twrp, philztouch)... non stick when i reboot?
I tried several times... odin says everything installed fine.
I wanted to install cf-root... i did it win odin and when phone restarted it says: "recovery booting.... recovery is not seandoird enforcing ... set warranty bit : recovery
Who can help me??
PS Im on lollipop 5.0 if it makes any difference. All attempts were realized with different versions of odin
People have success with TWRP 2.8.7.0 and ODIN 3.10.6
Then SuperSU from TWRP if it sticks
http://forum.xda-developers.com/showthread.php?t=2727406
Tried no luck. I simply get the stock recovery all the time after restart
daniel_cassian said:
Tried no luck. I simply get the stock recovery all the time after restart
Click to expand...
Click to collapse
Try unchecking "Auto reboot" in ODIN, and once the flash has finished, pull the battery, replace and boot into recovery
just tried it... still no go (... do you think i would have more success trying from adb?
Lol this phone has smth against me.
Tried adb: as long as i have it in "desktop" mode adb devices finds it; as soon as i adb reboot bootloader, using the fastbootdevices... adb doesnt see it anymore... so i cant proceed to the flashig
I know you know what you're doing when it comes to this stuff, as you said
But just to make sure, can you post the exact step by steps you're using to try and flash CF Auto-Root and TWRP etc with ODIN?
Yes of course. As i doesn't work for me... i (even) hope im doing something wrong, so we can get to the bottom of this.
So, installed S5 drivers, Enabled usb debuggin in phone (dev menu). Put phone in dl mode (vl dwn+power+home), open odin, select at AP the recovery (tried about 3 recoveries, older versions and newer ones, twrp, phil, open). I have both (by default) checked auto reboot and f-reset time... connect phone with usb cables (tried 2) (connected directly to mb, no extension)... hit start... get the pass message.. phone resets... goes into android. I power off, go to recovery mode (vl up+power+home) and... i get the stock recovery every single time.
Tried something wierd... flashed through Odin CF-root first (with intention to flash after twrp ... as it says phone needs to be rooted first)... it flashes ok (odin says pass, successful 1), reboot (or go to recovery mode)... i get that seandroid error.
Tried to to with with apps from android as well... it doesnt let me.. obviously as most ask phone to be rooted.
What am I missing?
Those are the correct steps, it definitely should have flashed
Doing this from a native PC yes? Ive seen people trying it from Macs and it fails every time
Only thing I can think of right now is try using a different PC
You don't need USB debugging enabled for flashing with ODIN, download mode has no idea what settings you have enabled in Android
Like your method, I just do this:
Samsung Drivers (KIES3 installs them for you anyway)
Vol Down & Home & Power for Download Mode
Connect phone to PC USB
Leave ODIN defaults set (3.09 or 3.10.6)
Select CF-Auto-Root-klte-kltexx-smg900f.tar.md5 in AP/PDA section of ODIN
Wait for it to become ready
Hit start
Phone reboots, and I have root
You could try factory resetting the phone, and trying again, see if that does anything, or at least clear the caches from stock recovery first

Samsung Galaxy S5 SM-G900F 5.0 stuck during root

This is not the first time i root an android device but it is the first time im doing it on an S5, nonetheless I am pretty much stuck right now.
I tried to install CF-Auto-Root-klte-kltexx-smg900f.tar using Odin from here, it installed with no problems, but when the phone restarted I get:
RECOVERY BOOTING
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery
and then it shuts down.
I tried to enter recovery mode by doing power+vol up+menu but nothing happens ?
Can anyone help ?
EDIT: ok, so I did manage to get it running again by flashing openrecovery-twrp-2.8.5.0-gt-klte. This got me past the "Recovery is not seandroid...", but all in all I still didn't manage to get root access...
I passed through a similar situation , all u have to do once u've got the recovery is get the SuperSU flashable zip and flash it and ur done
Here is a direct link : https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1
This happened to me also. I am running XXU1BOJ1 . I flashed twrp-2.8.7.0-klte.img and even though it solved getting stuck at recovery, my phone still boots into the standard recovery instead of TWRP when pressing VOLUP+Home+Power. Anyone got ideas?
xmun said:
This happened to me also. I am running XXU1BOJ1 . I flashed twrp-2.8.7.0-klte.img and even though it solved getting stuck at recovery, my phone still boots into the standard recovery instead of TWRP when pressing VOLUP+Home+Power. Anyone got ideas?
Click to expand...
Click to collapse
You don't flash .img - you flash .tar
*Detection* said:
You don't flash .img - you flash .tar
Click to expand...
Click to collapse
I did flash .img.tar actually. Still no effect - boots to regular recovery. Can't figure this out...
i get in the same situation...why still rebooting in original recovery?
i installed this one CF-Auto-Root-klte-kltexx-smg900f.tar with odin with succes but still have
RECOVERY BOOTING
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery
then when i boot i get a black screen with all application error....the only way to get it back working was to wipe factory reset in original recovery.
what can i do to get it working so i can install custom roms?
thx in avance
seaskyways said:
I passed through a similar situation , all u have to do once u've got the recovery is get the SuperSU flashable zip and flash it and ur done
Here is a direct link : https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1
Click to expand...
Click to collapse
I can't seem to get the coustom recovery installed, and after some digging i found this :
manubhargav said:
Actually the problem was that custom recovery(twrp here) was not installed at all, that above mentioned error occurs when you try to install SuperSU.zip from stock recovery<3e>.
This happens because when you flash custom recovery from Odin and allow it to reboot on its own, Samsung's recovery checking script checks if a custom recovery is present and overrides.
To bypass that check you need to take your battery out as soon as the recovery is flashed by Odin ( and before the phone reboots).
As soon as the Odin says PASS you should be ready to take out the battery which will stop it from rebooting,
put back the battery and enter recovery mode directly by pressing and holding Volume Up, Home and Power keys at the same time.
Release all three buttons when Samsung Galaxy S5 screen flickers and the main screen of Recovery mode appears.
This will avoid script checking and will let you to custom recovery directly,there you can install SuperSU or any other zip.
Click to expand...
Click to collapse
The thing is, when i try to do that, and then get into recovery i get
Could not do normal boot.
ODIN MODE.
Any help ? Please ? The bloatware is driving me nuts :crying:
VL4DST3R said:
I can't seem to get the coustom recovery installed, and after some digging i found this :
The thing is, when i try to do that, and then get into recovery i get
Could not do normal boot.
ODIN MODE.
Any help ? Please ? The bloatware is driving me nuts :crying:
Click to expand...
Click to collapse
Maybe your phone is not recognized in Download Mode as corresponding drivers may not be properly installed. So Computer is not able to recognize the phone when in Downlaod mode. Install SM Bus Controllers drivers from Intel from Official driver source.
After setting-up you'll be able to flash TWRP and boot into recovery mode.
---------- Post added at 05:36 AM ---------- Previous post was at 05:32 AM ----------
xmun said:
This happened to me also. I am running XXU1BOJ1 . I flashed twrp-2.8.7.0-klte.img and even though it solved getting stuck at recovery, my phone still boots into the standard recovery instead of TWRP when pressing VOLUP+Home+Power. Anyone got ideas?
Click to expand...
Click to collapse
Actually the problem of custom recovery (TWRPhere) not installed at all, stock recovery<3e> persists after reboot because when you flash custom recovery from Odin and allow it to reboot on its own, Samsung's recovery checking script checks if a custom recovery is present and overrides.
To bypass that check you need to take your battery out as soon as the recovery is flashed by Odin ( and before the phone reboots).
As soon as the Odin says PASS you should be ready to take out the battery which will stop it from rebooting,
Put back the battery and enter recovery mode directly by pressing and holding Volume Up, Home and Power keys at the same time.
Release all three buttons when Samsung Galaxy S5 screen flickers and the main screen of Recovery mode appears.
This will avoid script checking and will let you to custom recovery directly,there you can install SuperSU or any other zip.
manubhargav said:
Maybe your phone is not recognized in Download Mode as corresponding drivers may not be properly installed. So Computer is not able to recognize the phone when in Downlaod mode. Install SM Bus Controllers drivers from Intel from Official driver source.
After setting-up you'll be able to flash TWRP and boot into recovery mode.
Actually the problem of custom recovery (TWRPhere) not installed at all, stock recovery<3e> persists after reboot because when you flash custom recovery from Odin and allow it to reboot on its own, Samsung's recovery checking script checks if a custom recovery is present and overrides.
To bypass that check you need to take your battery out as soon as the recovery is flashed by Odin ( and before the phone reboots).
As soon as the Odin says PASS you should be ready to take out the battery which will stop it from rebooting,
Put back the battery and enter recovery mode directly by pressing and holding Volume Up, Home and Power keys at the same time.
Release all three buttons when Samsung Galaxy S5 screen flickers and the main screen of Recovery mode appears.
This will avoid script checking and will let you to custom recovery directly,there you can install SuperSU or any other zip.
Click to expand...
Click to collapse
The drivers are installed, and Odin sees my phone just fine, also the thing with removing the battery before it restats leads me to the error i mentioned above...
VL4DST3R said:
The drivers are installed, and Odin sees my phone just fine, also the thing with removing the battery before it restats leads me to the error i mentioned above...
Click to expand...
Click to collapse
Ah, So the problem you're facing is NOT getting into recovery mode
There are 2 ways to solve the problem, (1st -> flashing recovery.tar again, 2nd-> flashing stock firmware)
First method:
Enter "Download Mode" by holding down "Volume Down"+ "Home" + "Power" button.
Flash recovery.img again and check if it boots into recovery this time.
Sometimes this may not work and you may need to try flashing firmware
Second method:
Download Firmware from here
Open odin in your PC
Enter "Download mode"
Connect the device to PC using USB
Flash the PDA, BL, AP, CSC etc.
Alternatively, You can flash the firmware using SmartSwitch
manubhargav said:
Ah, So the problem you're facing is NOT getting into recovery mode
Click to expand...
Click to collapse
Oh but it is! That's exactly my problem. Look, here are the 3 outcomes I get regarding the whole recovery menu thing:
Go into the default recovery menu - cant install SuperSU but at least it works.
Install twrp and remove the battery after it finishes transfering and wants to restart, at which point when I go into recovery I get the above error (Could not do normal boot. ODIN MODE.)
Install twrp and let it restart by itself and after it is done, go into recovery only to find it is back to the default one.
VL4DST3R said:
Oh but it is! That's exactly my problem. Look, here are the 3 outcomes I get regarding the whole recovery menu thing:
Go into the default recovery menu - cant install SuperSU but at least it works.
Install twrp and remove the battery after it finishes transfering and wants to restart, at which point when I go into recovery I get the above error (Could not do normal boot. ODIN MODE.)
Install twrp and let it restart by itself and after it is done, go into recovery only to find it is back to the default one.
Click to expand...
Click to collapse
Which Kernel version are you in? Which TWRP version did you try? Install other custom recoveries? On locked bootloader?
Ok, I tried CWM and nothing changed, i get the default recovery menu...
Doing the shut down before it restarts gets me "recovery is not seandorid enforcing"
VL4DST3R said:
Ok, I tried CWM and nothing changed, i get the default recovery menu...
Doing the shut down before it restarts gets me "recovery is not seandorid enforcing"
Click to expand...
Click to collapse
Turn OFF Auto-Reboot option in ODIN and flash the recovery.tar and remove battery and directly boot into recovery mode.
Go into a working custom recovery (CWM or TWRP) and flash SuperSU.zip from the recovery and reboot with ("Fix permissions" if there is such an option, otherwise simply reboot).
manubhargav said:
Turn OFF Auto-Reboot option in ODIN and flash the recovery.tar and remove battery and directly boot into recovery mode.
Go into a working custom recovery (CWM or TWRP) and flash SuperSU.zip from the recovery and reboot with ("Fix permissions" if there is such an option, otherwise simply reboot).
Click to expand...
Click to collapse
Tried that already, and as I said, I can't get a custom recovery working, it either resets to the default one or I get the "recovery is not seandorid enforcing" error.
VL4DST3R said:
Tried that already, and as I said, I can't get a custom recovery working, it either resets to the default one or I get the "recovery is not seandorid enforcing" error.
Click to expand...
Click to collapse
1)
Ah use latest twrp 2.8.70
Ah use latest supersu beta 2.52
Quick download cm12.1 nightly and flash it.
Boot Rom and go into settings/aboutphone/ click build number rapidly.
Developer settings should appear, then go into developers options/ click on "root access" and enable it.
---- now test if its working . however....
2)
If its not working, take yourself back into twrp and flash that supersu beta.
----now test again. However ....
3)
If it doesn't work again .
go back to stock 5.0 rom>>> put twrp on >>> and flash DAT supersu .
now test ya rom again. However.........
4)
If it dont work again ..
go back to stock 4.4 rom>>> put twrp on>>> and flash a random supersu.
now test ya rom again. However.....
5)
if that doesn't work again,
Go back to stock rom through (odin) and restart the process from the top .
btw the "recovery is not seandorid enforcing" is normal . not an error.
GeniusisHere said:
1)
Ah use latest twrp 2.8.70
Ah use latest supersu beta 2.52
Quick download cm12.1 nightly and flash it.
---- now test if its working . however....
2)
----now test again. However ....
3)
If it doesn't work again .
now test ya rom again. However.........
4)
If it dont work again ..
now test ya rom again. However.....
5)
if that doesn't work again, .
Click to expand...
Click to collapse
First of all holy **** what an answer... let's SLOW DOWN a bit first, shall we ?
Secondly you lost me from step 1, I don't want CyanogenMod, I want the default Samsung 5.0 with TouchWiz (contrary to popular belief I actually like it).
Also I would really like to know (from someone that actually knows why this happens) why is it reverting to default recovery and how can I stop it from doing so ? manubhargav had an interesting idea, but sadly it doesn't work for everyone (as someone else mentioned on that other post)
So I'm guessing no one knows the answer to my problem considering almost a moth has passed...
I know that in kitkat the answer was to turn off / disable 'Reactivation Lock' (located under settings>>security and unchecking the box)........
I had heard that Samsung had removed that option in lollipop, but it might be worth checking......it has/had to be disabled BEFORE attempting to flash anything......
http://i.imgur.com/rVnFwJM.jpg
keithross39 said:
I know that in kitkat the answer was to turn off / disable 'Reactivation Lock' (located under settings>>security and unchecking the box)........
I had heard that Samsung had removed that option in lollipop, but it might be worth checking......it has/had to be disabled BEFORE attempting to flash anything......
http://i.imgur.com/rVnFwJM.jpg
Click to expand...
Click to collapse
RL is still there with LP too

Stuck in Odin Mode after root + TWRP

Hey guys I'm kinda new in rooting and changing roms, but never had this problem before...
My sm-g530h got the home button broken, so I rooted it with Kingroot. It was ok, Root Checker said "access granted".
Then I flashed TWRP with Odin, also ok, rebooted normally.
With Quick Boot manually booted in download mode (remember, I don't have Home button), and here comes the problem.
It got stucked where it says: "could not do normal boot. Odin mode"
I can't find ANY solution without using the buttons combinations and PC Odin isn't detect the phone.
Please help this future Dev
PD.: Sorry for my english, I'm from Argentina.

[solved!] Used ODIN to install twrp but phone won't boot into recovery at all

Problem solved! i was installing the wrong version of twrp this is the correct version: https://eu.dl.twrp.me/j5xnlte/
I'm using SM-J510H
So I installed samsung drivers.
I even installed ADB and it's drivers (now i have samsung android in the device manager)
I downloaded TWRP for j53gxx:
https://eu.dl.twrp.me/j53gxx/
The .tar for odin (twrp-3.4.0-0-j53gxx.img.tar)
I did the OEM unlock and debugging thing I even got the notification that the computer was trying to access blah blah I did allow always.
Put the phone in download mode (Down + Home + Power)
Press up to enter download mode.
Connect the phone.
Untick reboot in odin.
Use the ap to select the correct file
Start success!
I try to reload into recovery tried so many different ways even the adb command to reboot into recovery. All I get is a little thing on the top left saying warranty bit recovery and then the screen is black.
It doesn't load into the default recovery it just stays black. I need to take the battery to rest...
I tried with adb but when i force it to load up into download mode (adb reboot bootloader)
adb doesn't recognize the phone anymore
I've now downloaded the android ask maybe that will solve things lol but does anyone have any advice please?
Should I consider installing a different recovery? like maybe CWM?
It has a costume rom on i guess it says "Hebrew by daniel mouyal for bt" in the about tab in the settings...
I tried using ADB to install but when it's in download mod it can't find the phone so when i enter the install command:"fastboot flash recovery twrp-2.8.x.x-xxx.img" it says: "waiting for device"
Well I've been installing the wrong version of twrp lol sry!
So just in case someone else hits the same problem it's not the twrp i posted before but this one:
https://eu.dl.twrp.me/j5xnlte/
When recovery is finished flashing in Odin, remove your battery to turn the device off.
Then put the battery back in and press vol+ and power button and home button at the same time.
Your device should then boot into twrp.
If you reboot before doing this the android operating system will ovewrite twrp with stock recovery and you will have to start the process again
Also you used the wrong twrp. J53gxx is 2015 model j500h and j5xnlte is j510fn not j510h. You must be careful or else you may seriously damage your device.
Use this twrp here for your device j510h
garylawwd said:
When recovery is finished flashing in Odin, remove your battery to turn the device off.
Then put the battery back in and press vol+ and power button and home button at the same time.
Your device should then boot into twrp.
If you reboot before doing this the android operating system will ovewrite twrp with stock recovery and you will have to start the process again
Also you used the wrong twrp. J53gxx is 2015 model j500h and j5xnlte is j510fn not j510h. You must be careful or else you may seriously damage your device.
Use this twrp here for your device j510h
Click to expand...
Click to collapse
Thank you for the response!
I managed to figure out the issue it was the wrong twrp version.. I can't update the title though
That's no problem.
What I would suggest though is to post how you fixed your issue in case anyone has problems in the future they can be referred to your thread here
garylawwd said:
That's no problem.
What I would suggest though is to post how you fixed your issue in case anyone has problems in the future they can be referred to your thread here
Click to expand...
Click to collapse
I did in my second post I posted the correct link to the correct version of twrp
I'll edit it so it's more visible

Categories

Resources