Hello
I bought a YD206 and installed russian rom.
It connects to H or H+ 3G network properly. Otherwise, the device does not connect to EDGE.(2g)
AsThe 2g network is complementary for 3g, the device is offline in the shades of 3g network.
Have anybody had same problem before?
I am using congstar, germany. It uses tmobile network. My contract has only 2g and 3g netzs.
The band is,
Name Interface
900 (E-GSM) GSM
1800 (DCS) GSM
Name Interface
B1 (2100) UMTS
I though YD206 has all three band width, doesn't it?
Do I have to set-up some properties?
You need to flash 'chinese' radios:
http://forum.xda-developers.com/showpost.php?p=68806660&postcount=10
That is exactly what I was looking for.
Works perfect! Thank you!!!
Related
Hi,
I am planning to buy Touch 3G or Touch Diamond. (Still confused)
However, can anyone tell me which one of these will work with US carriers 3G services.
The specs mention
General 2G Network GSM 850 / 900 / 1800 / 1900
3G Network HSDPA 2100 / 900
So, general latching on to US GSM networks and using Edge is not a problem, I know. However, not sure about 3G.
Whatever reading I have done shows that the 3G network is as per European standard. So I am sure I should be able to use 3G in Europe/Asia.
Can some gurus help me with this.
Appreciate your help
Anup
I have ATT, and no, the Touch 3G does not work because it is missing the 3G band used by ATT. I only get Edge in places where my old P3600 would get 3G.
araje said:
3G Network HSDPA 2100 / 900
Click to expand...
Click to collapse
Does this mean that this device will work at least for voice/SMS in Japan (which only has WCDMA 2100, no conventional GSM at all)?
is anyone running the IOLITE phone on TMOBILE US with a 3G connection?
well, better now than never...here is the answer:
nobody is running 3g on iolite with t'mo...
3g freq on iolite is 2100 mhz, and that is a hardware spec that cannot be changed with softwares updates...
im in Chile and have the same problem...here i can't use 3G network...only EDGE.
sad but true...
Here in Spain, the 3G connection is well, is fast! (with Orange)
Sorry for the inconvenience.
Regards!
kenslaters said:
well, better now than never...here is the answer:
nobody is running 3g on iolite with t'mo...
3g freq on iolite is 2100 mhz, and that is a hardware spec that cannot be changed with softwares updates...
im in Chile and have the same problem...here i can't use 3G network...only EDGE.
sad but true...
Click to expand...
Click to collapse
I'm also have unlocked Iolite and according to spec it have following:
GSM 850, GSM 900, GSM 1800, GSM 1900, UMTS 900, UMTS 2100
CSD, GPRS, EDGE, HSDPA, HSUPA, UMTS/WCDMA, GPS
So I think it should work with 3G network.
I preordered 3G network package from my ISP (Orange, IL) and configure it properly, according to ISP instruction... but whenever I enable Data Connection it always show "G" letter on top bar.
On Iolite support site I read following:
You will see these icons on the title bar when your device is connected to the Internet. G means connected via GPRS. E means connected via EDGE. 3G means connected via 3G. H means connected via 3.5G.
Click to expand...
Click to collapse
Somebody know another way how to check with network I connected GPRS or 3G?
igor7: If you are connected to 3G network, your carrier name usually has 3G in name. For example 3G Vodafone instead of Vodafone. You should also check, which frequency is used for 3G in your country. If it is not 900 or 2100 MHz, you can't use Iolite for 3G.
EDIT: It is 2100 MHz in Israel. So next step is to check, if you are within 3G network coverage
torrentonly: The problem was in my sim card... It ~ 10 years old. I received it with my first mobile phone. Therefore it doesn't know nothing better than GPRS . Previously I didn't use internet on Iolite, so I didn't pay attention on this issue. Now, after I upgraded Iolite to WM6.5 and install WAZE navigation software (it use internet connection and preloaded drivers alert, traffic info e.t.c.) I noticed that my connection to slow...
Hi! would someone please tell me if there is a way to find out if I have a
US Model: UMTS850, UMTS1900, UMTS2100
or
AWS Model: UMTS900, UMTS1700, UMTS2100
"System View" app says it is HSDPA 850/1900/2100, but no other app says that kind of info.
I have an unlocked dvp I got from ebay, the seller said twice that it is a UMTS850..., like for at&t,
but
the problem I have is that there is no way I can get 3G signal here in Costa Rica, I have a 3G sim also, with 1MB internet but the phone only gets "Edge" signal for 128kbits/s internet, I have 3G option enabled btw, and I also messed up with EM, and the RF power stuff was set to UMTS 1700, I changed it to 850, setted and that doesn't changed anything.
Tried some test in the tmobile section and some tests say WCDMA disabled or something like that.
Also if someone know a way to force WCDMA / UMTS / HSDPA ?? of enable it?
or set manually frequencies, or know which version I have.
BTW! internet speed works as it should be on a 3g datacard con my pc, but not on the 3 cellphones I tested.
I ordered an unlocked 3g huawei e220 modem and it wont connect at all, I am trying to connect to Bell mobility's 3g network in Canada.After putting the Apn for bell and connecting through the ppp widget , it keeps saying "dialing out" and nothing happens. The modem has a continuos green blinking light too.
Can any one please help me here, I am getting so frustrated with this now
I know it's late but this 3G modem is not compatible with HSPA frequencies in North America.
Specs are:
HSPA on 2100Mhz Band for E220
Edge/GPRS: 850/1900
Bell do not have like Rogers 2G Gprs and have only:
Bell HSPA 850/1900, LTE Band 4 (AWS), Band 7 (2600)
Sorry!
I'm getting weak signal but I'm not sure which band is the problem (we have LTE1800 WCDMA850/900/2100 in the same network).
Where do I find out which of the 3G bands is my phone registered on?
Thanks