K1 1.5 flashable - Shield Tablet General

Hello, I created this flashable zip of the 1.5 update for the K1 using SuperR's Kitchen. (Original file)
You can flash it with twrp.
This is my very first time, so theres no guarantee at all.
It worked for me. Take it or leave it.
It's deodexed and ziplaigned.
Rooted and with SuperSU.
Download: https://mega.nz/#!Xow12BiT!lF3wUNtDePdxKkvNJ6mPSyvPza7FaNF_4YSj91TiwbA

Confirmed working on my K1. Also could you maybe provide the blob if you still have the original full zip? Thanks for this!

thanks very much!

Downloading!! Thanks for your effort.

Max4000 said:
Hello, I created this flashable zip of the 1.5 update for the K1 using SuperR's Kitchen. (Original file)
You can flash it with twrp.
This is my very first time, so theres no guarantee at all.
It worked for me. Take it or leave it.
It's deodexed and ziplaigned.
Rooted and with SuperSU.
Download: https://mega.nz/#!Xow12BiT!lF3wUNtDePdxKkvNJ6mPSyvPza7FaNF_4YSj91TiwbA
Click to expand...
Click to collapse
I'm using @GtrCraft Optimized Stock Rom, can I use this to update it? Thanks

coowkeee said:
I'm using @GtrCraft Optimized Stock Rom, can I use this to update it? Thanks
Click to expand...
Click to collapse
Yeah but my optimisations are gone then

It worked for me. I used the same rom before flashing this.

GtrCraft said:
Yeah but my optimisations are gone then
Click to expand...
Click to collapse
Are you going to make a new optimized one?
This one is only a test which I wanted to share.

Max4000 said:
Are you going to make a new optimized one?
This one is only a test which I wanted to share.
Click to expand...
Click to collapse
When the nvidia images are out

GtrCraft said:
Yeah but my optimisations are gone then
Click to expand...
Click to collapse
Ok, i thought it was the same. Thanks

For me this is hanging on "Extracting System Partition". Let it sit for at least 15 mins. Forced reboot back to recovery and flashed the full 1.4. thought about trying to boot but did not want to corrupt adaptive storage. Also I installed from adaptive storage like always.

Dropline said:
For me this is hanging on "Extracting System Partition". Let it sit for at least 15 mins. Forced reboot back to recovery and flashed the full 1.4. thought about trying to boot but did not want to corrupt adaptive storage. Also I installed from adaptive storage like always.
Click to expand...
Click to collapse
For me it took a long time too. Maybe if you want to try it again let it plugged in the charger and give it some time.

good for me
Thanks you, it's gold for me.

I'm on Shield k1 software version 1.2, rooted w/TWRP. Will this work for me. Do I need other files besides this one. I'm worried about bricking my tablet. Any help would be appreciated.
Sent from my SHIELD Tablet K1 using XDA-Developers mobile app

K1 1.5 Full OTA
Hello
I found the link to the complete 1.5 K1 Recovery OS Image from Nvidia.
developer.download.nvidia.com/mobile/shield/ROM/ST8K1/1_5_0/nv-recovery-sb-na-wf-1.5.0.zip

it works
where options are root, not found ?
ok
I installed the recovery Supersu and running

basically this is 1.5 stock but rooted correct?

ian619420 said:
basically this is 1.5 stock but rooted correct?
Click to expand...
Click to collapse
Correct.

Thanks, working!!

So what's up with this 1.5 update ? Nougat ?

Related

[UPDATE] CWM flashable ASUS update for ICS -- updated US, TW and WW version

As it says the update for ASUS ICS, but CWM flashable.
*WARNING* If you are rooted, you will need OTA rootkeeper from Market to flash this patch, or flash superuser after rebooting at least once. Currently US and WW ROMs only.
--If someone has an update from another version (CN, etc.) that they want to use, PM me with a link to the file and I can build/edit a script for that too and add it in--
You should be on an odexed stock ROM (rooted of-course) in order for this to work. If you are on a custom ROM, don't bother, it won't work for you. You will need to wait for the dev of your ROM to make a patch or upgrade.
I set this up to only flash the kernal and the patches. Recovery will not be effected. This is confirmed working for me.
The US version -- http://www.mediafire.com/?3aa16qy7sh4t9m4
The WW version -- credit to Lizard -- http://www.mediafire.com/?nw4zgwvl3yug0tw
The TW version -- thanks to wai43 for the files -- http://www.mediafire.com/download.php?cfq6d5lug4q4sd8
I will not be responsible if you brick your tablet. This patch worked fine for me, but may not work for others.
If I'm on stock rooted ics... Should I full wipe? Or just wipe cache and flash over? Thanks
Sent from my Transformer TF101 using Tapatalk
Ep3n3wp said:
If I'm on stock rooted ics... Should I full wipe? Or just wipe cache and flash over? Thanks
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
I didn't wipe anything. It worked fine for me. It works just like a normal update. You may need to be sure to have all the factory installed files though. I did the update from a full stock, rooted ROM. Worked great.
You sir are awesome. Worked perfectly.
For those like mE that edited thier system.
1. I flashed ics full over my set up to restore it without losing my settings.
2. Root keeper to keep root.
3. Flashed this update.
4. Used root keeper to restore root.
5. Profit????
tweaked said:
You sir are awesome. Worked perfectly.
For those like mE that edited thier system.
1. I flashed ics full over my set up to restore it without losing my settings.
2. Root keeper to keep root.
3. Flashed this update.
4. Used root keeper to restore root.
5. Profit????
Click to expand...
Click to collapse
Honestly, I don't know if we can profit from this... lol, but thanks is just fine. I've been dabbling in this crap for years, but I had to go back to the drawing board to get that script to work right. I hope that ASUS has their crap together and don't release a bunch of patches over the next few months, that would suck for all the devs. It is supposed to have some benefits, but I've been playing with this for a few hours and haven't seen anything amazing yet... I'm working on some thing based on this and will release soon.
BTW, for those with random reboot issues, I have yet to have experienced that -- since the original update. Anyway, just my 2 cents.
sent from my ASUS Transformer running modded ICS using Tapatalk
Sharpe351 said:
Honestly, I don't know if we can profit from this... lol, but thanks is just fine. I've been dabbling in this crap for years, but I had to go back to the drawing board to get that script to work right. I hope that ASUS has their crap together and don't release a bunch of patches over the next few months, that would suck for all the devs. It is supposed to have some benefits, but I've been playing with this for a few hours and haven't seen anything amazing yet... I'm working on some thing based on this and will release soon.
BTW, for those with random reboot issues, I have yet to have experienced that -- since the original update. Anyway, just my 2 cents.
sent from my ASUS Transformer running modded ICS using Tapatalk
Click to expand...
Click to collapse
I didn't have the reboot error either. I wasn't even going to install the update. But since you made it easy....
Thanks for the uneventful update.
I HAVE experienced RR on ICS; will see what happens.
The poll in the other thread does not lead me to believe that this update fixes all the problems that lead to random reboots.
Anyway, thanks.
Btw, I tried to capture the update blob but after I renamed it, it disappeared from the /cache
I was just curious as to what you did to the update to defang it.
Is removing the recovery enough?
Does it also carry a bootloader update which you also have to remove?
feisty_noodle said:
Thanks for the uneventful update.
I HAVE experienced RR on ICS; will see what happens.
The poll in the other thread does not lead me to believe that this update fixes all the problems that lead to random reboots.
Anyway, thanks.
Btw, I tried to capture the update blob but after I renamed it, it disappeared from the /cache
I was just curious as to what you did to the update to defang it.
Is removing the recovery enough?
Does it also carry a bootloader update which you also have to remove?
Click to expand...
Click to collapse
I packed only the boot.img in the file. All the other junk is gone. From what I saw in the unpacked boot.img, there appears to be minor changes in the files. Quite possibly updates.
sent from my ASUS Transformer running modded ICS using Tapatalk
Can you just add superuser binary and the app plus busybox to the user script? I'm curious how you could go about further de clawing this update for rooted users.. maybe not wipe the system xbin folder just amend it? I'm out of my element...
luna_c666 said:
Can you just add superuser binary and the app plus busybox to the user script? I'm curious how you could go about further de clawing this update for rooted users.. maybe not wipe the system xbin folder just amend it? I'm out of my element...
Click to expand...
Click to collapse
I backed up su with OTA RootKeeper then rebooted into CWR. I flashed the zip, rebooted and let the update "optimize [my] apps". Once that was done I was greeted with my usual homescreen. A toast notification informed me WebKey was granted SuperUser permission, as always happens on bootup.
Surprised, I launched SuperUser and saw a corresponding new entry in the log. I double checked my current version of su, which was found to be current. I'm assuming that a "No newer version of su available" means su (and thus root) wasn't removed during the upgrade.
I next launched OTA RootKeeper which oddly reported my TF101 was no longer rooted. Nonetheless I hit RESTORE and root is back: or rather OTA RootKeeper is happy now.
--L.
Patch good for Non US Firmware?
I have tried to flash this update but I get an asset failure. Could that be due to the fact that I am running stock WW ICS and not the US version?
error
I got the error in the image I tried a couple of options including the microsd.
https://www.sugarsync.com/pf/D7256720_703_699618527
Sorry I cant get the image to show.
Sharpe351 said:
I didn't wipe anything. It worked fine for me. It works just like a normal backup. You may need to be sure to have all the factory installed files though. I did the update from a full stock, rooted ROM. Worked great.
Click to expand...
Click to collapse
Did you do this in CWM or no? I dont have CWM installed dont really care to bc Im not flashing any ROMs until NVflash works on my sbk version
Sent from my Transformer TF101 using Tapatalk
avasman said:
I have tried to flash this update but I get an asset failure. Could that be due to the fact that I am running stock WW ICS and not the US version?
Click to expand...
Click to collapse
you have to be on a US firmware.
Sent from my Motorola Triumph on CM7 (my custom build) using Tapatalk
lemonoid said:
Did you do this in CWM or no? I dont have CWM installed dont really care to bc Im not flashing any ROMs until NVflash works on my sbk version
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
this is not a ROM. Its a patch from Asus. Yes, it is cwm flashable.
Sent from my Motorola Triumph on CM7 (my custom build) using Tapatalk
carlvk said:
I got the error in the image I tried a couple of options including the microsd.
https://www.sugarsync.com/pf/D7256720_703_699618527
Sorry I cant get the image to show.
Click to expand...
Click to collapse
that is an assert failure. The update isn't happy due to the ROM you're running. if you aren't on a US ROM, it wont update.
Sent from my Motorola Triumph on CM7 (my custom build) using Tapatalk
Sharpe351 said:
that is an assert failure. The update isn't happy due to the ROM you're running. if you aren't on a US ROM, it wont update.
Sent from my Motorola Triumph on CM7 (my custom build) using Tapatalk
Click to expand...
Click to collapse
Aha, that'll be it I'm on ww.
Thanks for the help.
doesn't work for me (us tf).
sth about asusreader. maybe because i've deleted it and other stock apps...
oifi said:
doesn't work for me (us tf).
sth about asusreader. maybe because i've deleted it and other stock apps...
Click to expand...
Click to collapse
you need to be running a full ROM as stated in the OP.
Sent from my Motorola Triumph on CM7 (my custom build) using Tapatalk
Thank You
Sharpe thank you for this zip. I have a US B80 and the stupid update would start to install and then after getting about a 1/4 of the way it would freeze on the android with the exclamation point. Your zip solved that problem and so far no reboots or any weirdness. I do have one question about the update though, how do I stop the tablet from trying to take the OTA(it is persistent).
Thanks

Stuck on Asus Screen after Kernel Update

Hey people,
Currently I was running AOKP Build 33, then decided to flash my Transformer's kernel to Clemsyn-Blades3.2OCver22a (http://forum.xda-developers.com/archive/index.php/t-1109630.html), now it seems to be stuck on the Asus EEE Pad screen. I did a back up and through CWM v5.8.1.8 and restored without problem but it's still stuck.
I'm out of ideas and hoping you guys have some
gurellaz696 said:
Hey people,
Currently I was running AOKP Build 33, then decided to flash my Transformer's kernel to Clemsyn-Blades3.2OCver22a (http://forum.xda-developers.com/archive/index.php/t-1109630.html), now it seems to be stuck on the Asus EEE Pad screen. I did a back up and through CWM v5.8.1.8 and restored without problem but it's still stuck.
I'm out of ideas and hoping you guys have some
Click to expand...
Click to collapse
The Blade kernel is for Honeycomb. It is not compatible with ICS. You can reflash your ROM to get the original kernel back.
kokopopz said:
The Blade kernel is for Honeycomb. It is not compatible with ICS. You can reflash your ROM to get the original kernel back.
Click to expand...
Click to collapse
oh dman, is there a way I can put the original files to the internal memory, or update via SD card. my computer won't recognise the device when I plug it in
Yes use ADB and next time don't just random flash things. True guevor's kernel (I really have no idea why you haven't used that one .....)
gkillerx said:
Yes use ADB and next time don't just random flash things. True guevor's kernel (I really have no idea why you haven't used that one .....)
Click to expand...
Click to collapse
I second guevor's kernel. I was having the random reboots from anywhere between a few hours and less than two days, and since I flashed test13 I haven't had a single RR or SOD in two weeks.
Quick question:
Is the guevor's kernel compatible to stock ICS build 9.2.1.17??
It's rooted with CWM installed.
gkillerx said:
Yes use ADB and next time don't just random flash things. True guevor's kernel (I really have no idea why you haven't used that one .....)
Click to expand...
Click to collapse
Where can I download the kernel from?
I managed to use ADB to push then flash back to stock it's all working fine now.
gurellaz696 said:
Where can I download the kernel from?
I managed to use ADB to push then flash back to stock it's all working fine now.
Click to expand...
Click to collapse
its in the development section
farsight73 said:
Quick question:
Is the guevor's kernel compatible to stock ICS build 9.2.1.17??
It's rooted with CWM installed.
Click to expand...
Click to collapse
Yes, it's fully compatible, tried it myself not that long ago.
its under test 16b it works perfect
Sent from my Transformer TF101 using XDA
okay well I managed to upgrade to milestone 5, flashed guevor's kernel 17c and now it all works fine
Good To Hear
Thats good to hear. But make sure next time you read ALOT before flashing something!!!!!
sandman7793 said:
Thats good to hear. But make sure next time you read ALOT before flashing something!!!!!
Click to expand...
Click to collapse
yea that's the last time I'm flashing something when I'm half asleep

US ICS OTA file?

Could someone post up the US ICS OTA file? I don't see it available on Lenevo's download site yet: http://download.lenovo.com/slates/think/tablet1/
It is on the Lenovo FTP
ftp://slatesftp:[email protected]/ThinkPadTablet_A310_03_0069_0130_US.zip
mandrsn1 said:
It is on the Lenovo FTP
ftp://slatesftp:[email protected]/ThinkPadTablet_A310_03_0069_0130_US.zip
Click to expand...
Click to collapse
upload it if you have it please the link is down now
Sent from my ThinkPad Tablet using Tapatalk 2
ker2gsr said:
upload it if you have it please the link is down now
Sent from my ThinkPad Tablet using Tapatalk 2
Click to expand...
Click to collapse
That link is still working for me. I don't have a service i can upload to right now.
mandrsn1 said:
That link is still working for me. I don't have a service i can upload to right now.
Click to expand...
Click to collapse
from your tablet or PC? no dropbox?
Sent from my ThinkPad Tablet using Tapatalk 2
ker2gsr said:
upload it if you have it please the link is down now
Sent from my ThinkPad Tablet using Tapatalk 2
Click to expand...
Click to collapse
Here a dropbox till its on the http:
http://dl.dropbox.com/u/11001249/ThinkPadTablet_A310_03_0069_0130_US.zip
US needs two update files if going the FTP site download route.....~A310~(291M) and ~A400~(4.9M).
eldata said:
US needs two update files if going the FTP site download route.....~A310~(291M) and ~A400~(4.9M).
Click to expand...
Click to collapse
I was able to download both from the FTP here: ftp://slatesftp:[email protected]/slates/think/tablet1/
Now the question I am wondering is... Is it worth it? Potentially sacrificing root and CWR? I have been running 0.0.7.3 CM9 build for many months now and am curious to what you all think.
Pros/Cons? I've heard battery life is terrible, which is odd because I feel like I have good battery life on the CM9 Port. Also... Is root completely gone? Does OTA Rootkeeper help? My biggest concern (I'd probably even lose root if it is fixed), does the pen work as advertised? Or is the infamous 'pen wonk' bug still present?
Pen wonk = writing notes for ~10-15 minutes, pen is suddenly not responsive. Sleep/waking the device fixes it usually. This has been present in every stock Honeycomb build as well as all the CM9 Port builds so I am very curious if this is fixed because I believe it is a hardware issue (Lenovo please prove me wrong). Any info would be much appreciated.
obscure.detour said:
Now the question I am wondering is... Is it worth it? Potentially sacrificing root and CWR? I have been running 0.0.7.3 CM9 build for many months now and am curious to what you all think.
Pros/Cons? I've heard battery life is terrible, which is odd because I feel like I have good battery life on the CM9 Port. Also... Is root completely gone? Does OTA Rootkeeper help? My biggest concern (I'd probably even lose root if it is fixed), does the pen work as advertised? Or is the infamous 'pen wonk' bug still present?
Pen wonk = writing notes for ~10-15 minutes, pen is suddenly not responsive. Sleep/waking the device fixes it usually. This has been present in every stock Honeycomb build as well as all the CM9 Port builds so I am very curious if this is fixed because I believe it is a hardware issue (Lenovo please prove me wrong). Any info would be much appreciated.
Click to expand...
Click to collapse
I was able to go from a rooted, CWM'd device (US 64GB) to a fully rooted device without CWM.
After a few painful steps to get an old busybox file restored and stock recovery enabled, the upgrade process was very simple and so far it is working very well with ICS. There hasn't been enough time to judge battery life yet....
Make sure you follow the instructions that other's have posted about using RootKeeper. That is the only thing I needed to use to restore root perfectly.
armondole said:
After a few painful steps to get an old busybox file restored and stock recovery enabled, the upgrade process was very simple and so far it is working very well with ICS.
Click to expand...
Click to collapse
I updated with CWR rather than reverting to stock recovery. Everything worked fine. However, it did get rid of the stock recovery.
armondole said:
I was able to go from a rooted, CWM'd device (US 64GB) to a fully rooted device without CWM.
After a few painful steps to get an old busybox file restored and stock recovery enabled, the upgrade process was very simple and so far it is working very well with ICS. There hasn't been enough time to judge battery life yet....
Make sure you follow the instructions that other's have posted about using RootKeeper. That is the only thing I needed to use to restore root perfectly.
Click to expand...
Click to collapse
That is good news about the ability to keep root. At least in keeping root, we should theoretically be able to restore CWR.
mandrsn1 said:
I updated with CWR rather than reverting to stock recovery. Everything worked fine. However, it did get rid of the stock recovery.
Click to expand...
Click to collapse
How were you able to update using CWR?
obscure.detour said:
That is good news about the ability to keep root. At least in keeping root, we should theoretically be able to restore CWR.
How were you able to update using CWR?
Click to expand...
Click to collapse
I commented out the lines of the update script that checked for "indigo" in build.prop.
so you're now on official ISC with Root AND CWM ??
it's a great news !
quyTam said:
so you're now on official ISC with Root AND CWM ??
it's a great news !
Click to expand...
Click to collapse
No, when ICS installed, it got rid of CWM.
mandrsn1 said:
I commented out the lines of the update script that checked for "indigo" in build.prop.
Click to expand...
Click to collapse
Do you mind posting how you did the whole install process? Thanks.
bigsnack said:
Do you mind posting how you did the whole install process? Thanks.
Click to expand...
Click to collapse
I did not have CWR to start.
I downloaded the update through the "update" menu on the device.
Update failed due to gps.conf being modified.
Reverted to what I thought was old gps.conf, update still failed.
Install CWR
Try update through CWR
Still fail, due to indigo being required in build.prop (this error is caused by CWR)
Commented out the Indigo lines in the update-script in the update
Flashed again
Still failed for gps.conf.
Commented out each line in update-script mentioning gps.conf
flashed again, it worked.
I take you flashed 310 first then 400?
Where is the script located?
bigsnack said:
I take you flashed 310 first then 400?
Where is the script located?
Click to expand...
Click to collapse
The update-script is in the META-INF/com/google/android folder in the zip. a # sign will comment out any line.
Do I put the number sign in the front?
bigsnack said:
Do I put the number sign in the front?
Click to expand...
Click to collapse
Here is the file i used
http://dl.dropbox.com/u/8479005/updater-script

New OTA: 44S Rolling Out Now [Original and Modified OTAs Included]

Just FYI: https://forums.oneplus.net/threads/cm-11s-44s-ota-is-out.173057/
...didn't see the typical insta-thread here, heh.
Greetings friends,
Happy Weekend! Thanks to our buds at Cyanogen, a new OTA will be rolling out to your phones starting today. This new release includes some new fixes such as a resolved SSLv3 POODLE security issue and updated touchscreen firmware.
The OTA will be released slowly and therefore some regions might receive it before others. Once you’ve received your OTA please let us know what you think! Any further issues you may find can also be reported directly to Cyanogen.
Here’s a comprehensive list of changes you’ll find in this update:
Fixed issues with memory causing screen artifacts
Fixed issues with random reboots and instability
Fixed issues with WiFi and modem crashes
Fixed issues with Filesystem
Fixed issues with “black bar”
Fixed issues with persist partition corruption
Fixed issues with AT&T VoLTE
Click to expand...
Click to collapse
Edit: Forgot to mention... this includes a new modem, I know people are always interested in that.
As a side note, I've been running the build as part of an early access test for a few days now... has been extremely solid for me.
Edit again: LINKS!
• Link to the OTA: http://builds.cyngn.com/fota/incremental/bacon/cm-bacon-ac1ccf7921-to-5fa8c79c0b-signed.zip
MD5: 684bc3eb256f06a912505628551cba24
Super mini guide: As long as your system is stock, flash away in stock or custom recovery. I always re-flash the SuperSU zip immediately following, YMMV.
• Link to the OTA with a modified script (by @gianton) for installing regardless of system changes: https://mega.co.nz/#!EdBQ1Y4C!P85kyvVp1iR_I4IiuLKPxGBqskE3fueWe0OGAFidGEg
MD5: 3b5729b07200c0e53a02f6b1225fc79c
FAQ (since people are allergic to reading and searching):
1. ZOMG WHY NO WIFI AFTER OTA?: Because you used a custom kernel and didn't clean up your system files properly. Either follow that kernel threads instructions for OTA-prep'ing or flash back to that kernel.
2. I don't run CM 11S but I can totally flash this CM11S update, right?: No. If you want to flash the 44S OTA update, get yourself to CM11S 38R.
Zip file?
Inviato dal mio OnePlus One
Lolli......Oh wait <.< (Joke post)
Should have grab the zip.
hunter0389 said:
Should have grab the zip.
Click to expand...
Click to collapse
I did, but... as someone that hasn't tested for CM before, I'm not entirely clear on their position of a tester sharing. I wouldn't want to piss anyone off unnecessarily.
dmarden said:
I did, but... as someone that hasn't tested for CM before, I'm not entirely clear on their position of a tester sharing. I wouldn't want to piss anyone off unnecessarily.
Click to expand...
Click to collapse
I understand. Since the OTA is out, would you mind sharing the zip?
Got this link off Android Police article....
http://builds.cyngn.com/fota/incremental/bacon/cm-bacon-ac1ccf7921-to-5fa8c79c0b-signed.zip
blkhwkz said:
Got this link off Android Police article....
http://builds.cyngn.com/fota/incremental/bacon/cm-bacon-ac1ccf7921-to-5fa8c79c0b-signed.zip
Click to expand...
Click to collapse
Great, that makes me feel much better about posting it. I added your link to the OP.
If I update this new build will it break my root ?
vikramdhani said:
If I update this new build will it break my root ?
Click to expand...
Click to collapse
Not in any meaningful way. Just have the SuperSU zip on your phone and flash it after you flash the OTA.
going to be constantly refreshing for OTA. Currently on stock, unrooted, and planning on leaving it that way for now, can the zip be flashed in stock recovery?
dmarden said:
Great, that makes me feel much better about posting it. I added your link to the OP.
Click to expand...
Click to collapse
can i install with twrp?
zipper for TWRP?
mobbarley said:
going to be constantly refreshing for OTA. Currently on stock, unrooted, and planning on leaving it that way for now, can the zip be flashed in stock recovery?
Click to expand...
Click to collapse
I flashed it in TWRP, so I assume stock recovery is also fine.
nicola1989 said:
can i install with twrp?
Click to expand...
Click to collapse
Yes.
mittimus said:
zipper for TWRP?
Click to expand...
Click to collapse
The one in the OP is identical to the one I received as a tester and I flashed it in TWRP.
How do I keep root?
Sent from my A0001 using XDA Free mobile app
Crinkypops said:
How do I keep root?
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
I just keep the SuperSU zip on my phone and flash it immediately after the OTA whenever they come out.
dmarden said:
I just keep the SuperSU zip on my phone and flash it immediately after the OTA whenever they come out.
Click to expand...
Click to collapse
Perfect. Flashing now through TWRP.
Sent from my A0001 using XDA Free mobile app
mobbarley said:
going to be constantly refreshing for OTA. Currently on stock, unrooted, and planning on leaving it that way for now, can the zip be flashed in stock recovery?
Click to expand...
Click to collapse
If it contains "signed" it is flashable by stock too
Flashing the ZIP from AP did not work....going to reboot and try again.
reinert012 said:
Flashing the ZIP from AP did not work....going to reboot and try again.
Click to expand...
Click to collapse
Please also elaborate on "did not work" if it fails again... it's identical to the test build ZIP I received which flashed fine. Did you make any system modifications (if so, those will need to be reverted probably)?

[ROM][TW][SM-T807P Snapdragon] SuperSkilled Basic ROM V1 + Firmware

I am proud to present my second custom rom!
This is the first custom stock based ROM for the SM-T807P (Sprint). I don't plan on updating it that much as I don't own the device . I created this with archikitchen and a little help and testers which are down below. Downloading the firmware took me 14 hours to mirror and download+ the custom rom took an extra 4 hours also. That's 18 hours total! Anyway hope you all enjoy this rom as it should be a tad better than stock in my opinion.
Features
-Rooted
-Knox Removed
-Debloated
-Built in busybox
-Zipallinged
-Intd included
-DeOdexed
-ANK1 Base
-Many more
Installation
1. Have TWRP or CWM recovery installed (Use T807P)
2. Download the ROM
3.Backup your stuff in TWRP or CWM
4. Wipe dalvik,data, and caches (AKA Factory reset)
5.Install the ROM
6. Reboot and wait
7. Done?
Note: first boot may have crashes because of well its first boot. Simply just reboot 2-3 times and done! Happens on some ROMs
Support
Like what I do? Hit that thanks button! Wanna help even more? PM me  But hitting thanks should do it
Contributors
-Samsung for making the Tab S
-Jono for testing
-ashyx for making snapdragon twrp. Huge huge help!
-Tkkg1994 For the huge amount of help! WIthout him, I wouldn't make any roms!He taught me everything to get this going.
-ArchiKitchen Made the custom rom process easier
-Androidfilehost for host
-Support from others
- Many many more
Downloads
Superskilled V1: https://www.androidfilehost.com/?fid=95916177934541003
Help?
Dont worry! I help others all the time. Im more like a help line 
Download not working? Link has different servers. Pick one nearest you!
Note
I am not held responsible for any damages done to your device because of this rom. Your the one choosing to flash it. I try to make things bug free so things like this wont happen software wise.
Bugs: First boot has force closes. After a few reboots its gone
Just in case you mess up...
Firmware T807P: https://docs.google.com/file/d/0B5DZenb7A53caXhNQkhMb0NkMFU/edit?usp=docslist_api&pli=1
Kernel+Recovery: https://www.dropbox.com/sh/h5zw61wdn6rx319/AADS2Wb8OFDw3DxpuES7GI2Va?dl=0
Twrp snapdragon only! http://forum.xda-developers.com/showthread.php?t=3055758
will this work on the tmobile version 807t
Thank you
DUHAsianSKILLZ said:
I am proud to present my second custom rom!
This is the first custom stock based ROM for the SM-T807P (Sprint). I don't plan on updating it that much as I don't own the device . I created this with archikitchen and a little help and testers which are down below. Downloading the firmware took me 14 hours to mirror and download+ the custom rom took an extra 4 hours also. That's 18 hours total! Anyway hope you all enjoy this rom as it should be a tad better than stock in my opinion.
Features
-Rooted
-Knox Removed
-Debloated
-Built in busybox
-Zipallinged
-Intd included
-DeOdexed
-ANK1 Base
-Many more
Installation
1. Have TWRP or CWM recovery installed (Use T807P)
2. Download the ROM
3.Backup your stuff in TWRP or CWM
4. Wipe dalvik,data, and caches (AKA Factory reset)
5.Install the ROM
6. Reboot and wait
7. Done?
Note: first boot may have crashes because of well its first boot. Simply just reboot 2-3 times and done! Happens on some ROMs
Support
Like what I do? Hit that thanks button! Wanna help even more? PM me  But hitting thanks should do it
Contributors
-Samsung for making the Tab S
-Jono for testing
-ashyx for making snapdragon twrp. Huge huge help!
-Tkkg1994 For the huge amount of help! WIthout him, I wouldn't make any roms!He taught me everything to get this going.
-ArchiKitchen Made the custom rom process easier
-Androidfilehost for host
-Support from others
- Many many more
Downloads
Superskilled V1: https://www.androidfilehost.com/?fid=95916177934541003
Help?
Dont worry! I help others all the time. Im more like a help line 
Download not working? Link has different servers. Pick one nearest you!
Note
I am not held responsible for any damages done to your device because of this rom. Your the one choosing to flash it. I try to make things bug free so things like this wont happen software wise.
Click to expand...
Click to collapse
Thank you for this I was kinda disappointed with my tab s till now all the bloatware really slowed it down, but now its running smooth and fast, have not had any crashes "yet" and look forward to the next one and especially when lollipop comes out for it.
racersims said:
Thank you for this I was kinda disappointed with my tab s till now all the bloatware really slowed it down, but now its running smooth and fast, have not had any crashes "yet" and look forward to the next one and especially when lollipop comes out for it.
Click to expand...
Click to collapse
Lollipop will be a ton fast Once its out Ill brinf an update. Thanks for trying out the rom btw!
s?o it will work on the tmobile 807T
bmreyna said:
s?o it will work on the tmobile 807T
Click to expand...
Click to collapse
Tmobile rom here http://forum.xda-developers.com/showthread.php?p=59124401
I wouldn't get overexcited about lollipop. Many people who have had it have downgraded, my self included due to issues on my HTC m8..One main one being rapid battery drain, others are incompatibilities with apps. Xposed was incompatible, but that seems to be fixed, however there are still reports of problems.
Sent from my SM-T805 using XDA Free mobile app
Some yes, i have stock 5.0.1 on my note 4 so far no problems and also having a moto 360 i like the new notification tweaks, how ever on my note 10.1 2014 i have a custom 4om of 5.0.2 and for most part is great performance never better and battery is also lasting much longer but have lost 2 of my more valuable apps with VUDU and Dish Anywhere. Am trying to find fix but no luvk yet may force back to 4.4.3
Sent from my SM-N910P using XDA Free mobile app
racersims said:
Thank you for this I was kinda disappointed with my tab s till now all the bloatware really slowed it down, but now its running smooth and fast, have not had any crashes "yet" and look forward to the next one and especially when lollipop comes out for it.
Click to expand...
Click to collapse
What steps do I need to take to get back to stock so I can do ota update?
Help
DUHAsianSKILLZ said:
Just in case you mess up...
Firmware T807P: https://docs.google.com/file/d/0B5DZenb7A53caXhNQkhMb0NkMFU/edit?usp=docslist_api&pli=1
Kernel+Recovery: https://www.dropbox.com/sh/h5zw61wdn6rx319/AADS2Wb8OFDw3DxpuES7GI2Va?dl=0
Twrp snapdragon only! http://forum.xda-developers.com/showthread.php?t=3055758
Click to expand...
Click to collapse
What steps do i need to take after I get the above files to flash back to full stock? I have the SM-T807P_SPR***.zip 1.7gig and the two .img files now what do i do with them ? sorry am new to the flash thing and just dont want to brick it. thanks for all the work.
racersims said:
What steps do i need to take after I get the above files to flash back to full stock? I have the SM-T807P_SPR***.zip 1.7gig and the two .img files now what do i do with them ? sorry am new to the flash thing and just dont want to brick it. thanks for all the work.
Click to expand...
Click to collapse
Factory reset in recovery. Then reboot into download mode. I made a video on how to flash odin roms. Just watch this video I made. https://youtu.be/3KOoyoeozI0
Basically, Just load the T807P firmware in odin, Then hit start. It should get you hback to stock
DUHAsianSKILLZ said:
Factory reset in recovery. Then reboot into download mode. I made a video on how to flash odin roms. Just watch this video I made. https://youtu.be/3KOoyoeozI0
Basically, Just load the T807P firmware in odin, Then hit start. It should get you hback to stock
Click to expand...
Click to collapse
Ok so I flash the large file what about the two .img files what are they for?
---------- Post added at 10:57 AM ---------- Previous post was at 10:37 AM ----------
racersims said:
Ok so I flash the large file what about the two .img files what are they for?
Click to expand...
Click to collapse
Thank you so much the video helped and it also makes me want lollipop on the tab s even more but I have the LTE ver so guess still waiting. Thanks again for the help i needed to get it back to full stock now I can start again but making proper back ups and recovery as i go.
Thanks for the nice Rom. Is there a way to unlock this tab so I can use my tmobile sim in it?
Never heard of arcikitchen im goimg to set it up on my new 8370 8core rig hope to have a new rom out soon if its like android kitchen shouldnt be hard.
dincdoes.me said:
Never heard of arcikitchen im goimg to set it up on my new 8370 8core rig hope to have a new rom out soon if its like android kitchen shouldnt be hard.
Click to expand...
Click to collapse
Nah not really. Just make sure you have the right kernel paths when you out it in
Sent from my SM-T800 using Tapatalk
DUHAsianSKILLZ said:
Nah not really. Just make sure you have the right kernel paths when you out it in
Sent from my SM-T800 using Tapatalk
Click to expand...
Click to collapse
Thanks for the tip do u mind if i pm you if i get stuck its been since the note 1 since i made a rom lol
Thanks for the ROM, would you make the lollipop, thanks
Hello. Thanks for all your hard work. Are you going to do the update for lollipop?

Categories

Resources