Related
I was with the Rom "ussrv8" until then.
However, he left an update of your kernel, so I installed the updated kernel
After installing, the device usually called, functioned normally for a few minutes .. Approximately 40 .. But, out of nowhere he hung up, and now just restarts endlessly
I can not go into recovery mode, and also not to get into the download mode, as the unit is not restarting.
But once I managed to get into download mode, I managed to install the stock ROM, but the problem remains ..
Oh and when you turn the image no longer appears "Galaxy y GT-S5360"
Aperece a message in blue saying "Logo _LTN_B.jpg 'draw failed
PLEASE HELP ME OUT ! I'M DESPERATE !
baigonmax said:
I was with the Rom "ussrv8" until then.
However, he left an update of your kernel, so I installed the updated kernel
After installing, the device usually called, functioned normally for a few minutes .. Approximately 40 .. But, out of nowhere he hung up, and now just restarts endlessly
I can not go into recovery mode, and also not to get into the download mode, as the unit is not restarting.
But once I managed to get into download mode, I managed to install the stock ROM, but the problem remains ..
Oh and when you turn the image no longer appears "Galaxy y GT-S5360"
Aperece a message in blue saying "Logo _LTN_B.jpg 'draw failed
PLEASE HELP ME OUT ! I'M DESPERATE !
Click to expand...
Click to collapse
try odin once again..
I think.it will help
rooting is new for me...and i am noob to root...
Download a new firmware by Doky then try to reflashing it again.
But i think some of our dev/friends here in XDA were gonna help you
or if not contact Samsung Care Center.
Try with Odin once more but this time include totoro file(along with PDA,MODEM nd CSC)-maybe this will work.
I was using totoro before with no problem-in ur case this could be the right thing
Good luck man !!!!:good:
NEVER include PIT file or tick repartition. Just make sure you are flashing the right way. Make sure you have all the drivers required. Download the latest regional firmware from doky73's thread and follow the instructions there.
hitme987 said:
NEVER include PIT file or tick repartition. Just make sure you are flashing the right way. Make sure you have all the drivers required. Download the latest regional firmware from doky73's thread and follow the instructions there.
Click to expand...
Click to collapse
u are right bro.
The Problem is with your kerenal
baigonmax said:
I was with the Rom "ussrv8" until then.
However, he left an update of your kernel, so I installed the updated kernel
After installing, the device usually called, functioned normally for a few minutes .. Approximately 40 .. But, out of nowhere he hung up, and now just restarts endlessly
I can not go into recovery mode, and also not to get into the download mode, as the unit is not restarting.
But once I managed to get into download mode, I managed to install the stock ROM, but the problem remains ..
Oh and when you turn the image no longer appears "Galaxy y GT-S5360"
Aperece a message in blue saying "Logo _LTN_B.jpg 'draw failed
PLEASE HELP ME OUT ! I'M DESPERATE !
Click to expand...
Click to collapse
The problem is with your kernel if you can go to download mode try flashing to another kernel i would personally recomend BLACKREACTOR kernel flashing to this kernel would solve the problem you can download it from here instructions are also included in this post hit thanks if i helped :angel:
http://forum.xda-developers.com/showthread.php?t=2465376
Flash stock rom via odin.
watch my tutorial how to unbrick SGY.
http://www.youtube.com/watch?v=yEootBtaHNk&feature=c4-overview&list=UUZsKlqDX8lpEKl-Y-9oBDQg
Hit thanks if it helps you!
StudentsGrid said:
The problem is with your kernel if you can go to download mode try flashing to another kernel i would personally recomend BLACKREACTOR kernel flashing to this kernel would solve the problem you can download it from here instructions are also included in this post hit thanks if i helped :angel:
http://forum.xda-developers.com/showthread.php?t=2465376
Click to expand...
Click to collapse
why you are digging the older posts???
to increase post counts ???lol!!!
I am new in this forum and there is no restriction to replying the older posts.
vlc07 said:
why you are digging the older posts???
to increase post counts ???lol!!!
Click to expand...
Click to collapse
I am new in this forum and there is no restriction to replying the older posts.
Don't waste your time here visit a service center
Sent from my GT-S5360 using xda app-developers app
I tried to install custom recovery file provided fom a youtube video for my LG G2 D802 international version (cant post the link cause i am new, but the youtube user name is Phone Tech Kid, the video is titled: "LG G2: How To Install Custom Recovery (Easy Method)"
Here is a screenshot with the error message (simply copy and paste in your browser):
s14.directupload.net/images/140506/ii7j2kgp.png
The problem is that after successfully installing the recovery file i cant even go into recovery mode on reboot anymore. The phone is bricked :crying:
I didnt pay attention that the video is from 11.2013 and my device had the 4.4.2 KitKat from end ot March, seems that has caused the brick.
PLEASE help
Android-rocks said:
I tried to install custom recovery file provided fom a youtube video for my LG G2 D802 international version (cant post the link cause i am new, but the youtube user name is Phone Tech Kid, the video is titled: "LG G2: How To Install Custom Recovery (Easy Method)"
Here is a screenshot with the error message (simply copy and paste in your browser):
s14.directupload.net/images/140506/ii7j2kgp.png
The problem is that after successfully installing the recovery file i cant even go into recovery mode on reboot anymore. The phone is bricked :crying:
I didnt pay attention that the video is from 11.2013 and my device had the 4.4.2 KitKat from end ot March, seems that has caused the brick.
PLEASE help
Click to expand...
Click to collapse
that video is outdated and would never work on kitkat if you want custom recovery and can still boot into your phone(android os) then try AutoRec it is the easiest/only way to get recovery on kit kat
XxZombiePikachu said:
that video is outdated and would never work on kitkat if you want custom recovery and can still boot into your phone(android os) then try AutoRec it is the easiest/only way to get recovery on kit kat
Click to expand...
Click to collapse
Thank you, thanks a lot. I hear you with the AutoRec. But how i can get it on the phone while i cant boot the phone.. I cant even get into recovery mode I got only the error message (from the first post) for a several seconds, then the screen goes blank, black that is?
Android-rocks said:
Thank you, thanks a lot. I hear you with the AutoRec. But how i can get it on the phone while i cant boot the phone? I cant even get into recovery mode I got only the error message (from the first post) for a several seconds, then the screen goes blank, black that is?
Click to expand...
Click to collapse
can you get into download mode if so use back to stock guide to recover your phone
XxZombiePikachu said:
that video is outdated and would never work on kitkat if you want custom recovery and can still boot into your phone(android os) then try AutoRec it is the easiest/only way to get recovery on kit kat
Click to expand...
Click to collapse
XxZombiePikachu said:
can you get into download mode if so use back to stock guide to recover your phone
Click to expand...
Click to collapse
Yes i used the power+volume up button combination and it went in download mode, than the screen changed and showed "Firmware update" beneath it: "Do not unplug the USB connection until the prcess is complete." Is this the donwload mode?
The link with the recovery back to stock ROM seems complicated with lot of steps. Can i instead go for a google edition rom (such as EHNDROIX V) instead of the stock ROM at this stage?
Android-rocks said:
Yes i used the power+volume up button combination and it went in download mode, than the screen changed and showed "Firmware update" beneath it: "Do not unplug the USB connection until the prcess is complete." Is this the donwload mode?
The link with the recovery back to stock ROM seems complicated with lot of steps. Can i instead go for a google edition rom (such as EHNDROIX V) instead of the stock ROM at this stage?
Click to expand...
Click to collapse
yes that's download mode and that is not like flashing a rom through recovery that is the only way to get your phone back to working condition and method 3 is a batch file which does it all for you
XxZombiePikachu said:
yes that's download mode and that is not like flashing a rom through recovery that is the only way to get your phone back to working condition and method 3 is a batch file which does it all for you
Click to expand...
Click to collapse
Thanks a ton for helping me.
I guess i need to accomplish those 3 steps:
1.2). Firmware Files HERE! KitKat 4.4.2 Firmwares
1.3). Download R&D FlashTool (offline fix) & LGMOBILEAX: HERE & HERE
1.4).Download Drivers - Click Here
Than Method 3 from the link you provided.
How do i do it exactly? Drivers i have already installed the rom is downloded. Step 1.3 is not clear how it works togehter with Method 3?
Android-rocks said:
Thanks a ton for helping me.
I guess i need to accomplish those 3 steps:
1.2). Firmware Files HERE! KitKat 4.4.2 Firmwares
1.3). Download R&D FlashTool (offline fix) & LGMOBILEAX: HERE & HERE
1.4).Download Drivers - Click Here
Than Method 3 from the link you provided.
How do i do it exactly? Drivers i have already installed the rom is downloded. Step 1.3 is not clear how it works togehter with Method 3?
Click to expand...
Click to collapse
after you install the r&d tool and lgmobilelax you just have to run the batch in method 3 and everything should be done automatically
XxZombiePikachu said:
after you install the r&d tool and lgmobilelax you just have to run the batch in method 3 and everything should be done automatically
Click to expand...
Click to collapse
my dear god, it worked :laugh::laugh::laugh: everything is there !!!! thank you thank you thabk you !
Now i want to install a custom google like ROM something like EHNDROIX V. What do i do so i dont go in to troubles again ? The devices returned to be not rooted, guess that comes first. Than maybe custom recovery suitable for 4.4.2?
Android-rocks said:
my dear god, it worked :laugh::laugh::laugh: everything is there !!!! thank you thank you thabk you !
Now i want to install a custom google like ROM something like EHNDROIX V. What do i do so i dont go in to troubles again ? The devices returned to be not rooted, guess that comes first. Than maybe custom recovery suitable for 4.4.2?
Click to expand...
Click to collapse
sorry I am repairing a desktop, for root use ioroot25 and for recovery AutoRec as for endroix give me a couple minutes to look into the rom and see if you need anything special before flashing
---------- Post added at 04:22 PM ---------- Previous post was at 04:11 PM ----------
Android-rocks said:
my dear god, it worked :laugh::laugh::laugh: everything is there !!!! thank you thank you thabk you !
Now i want to install a custom google like ROM something like EHNDROIX V. What do i do so i dont go in to troubles again ? The devices returned to be not rooted, guess that comes first. Than maybe custom recovery suitable for 4.4.2?
Click to expand...
Click to collapse
ok for flashing rom download d802 modem and rom, then flash the modem then the rom or flash rom and then modem it's up to you and reboot you should have endroix installed and rotation/other stuff should also work
XxZombiePikachu said:
sorry I am repairing a desktop, for root use ioroot25 and for recovery AutoRec as for endroix give me a couple minutes to look into the rom and see if you need anything special before flashing
---------- Post added at 04:22 PM ---------- Previous post was at 04:11 PM ----------
ok for flashing rom download d802 modem and rom, then flash the modem then the rom or flash rom and then modem it's up to you and reboot you should have endroix installed and rotation/other stuff should also work
Click to expand...
Click to collapse
Thank you, thanks a lot.
Rooting worked, checked it afterwards with an root check app.
Also installed the AutoRec successfully with the apk file, i did run it after inszallation and everything. But i want to test it whether it is there, how can i check it? I held the power+down keys but its an white screen: "Factory hard reset" below it: "Permanently Erase user Data & Reset settings?" and below this: "Press power key to confirm, and any other key to cancel". Seems not like recovery with a lot of options touch buttons and things. How can i check for correct installation of the AutoRec?
Android-rocks said:
Thank you, thanks a lot.
Rooting worked, checked it afterwards with an root check app.
Also installed the AutoRec successfully with the apk file, i did run it after inszallation and everything. But i want to test it whether it is there, how can i check it? I held the power+down keys but its an white screen: "Factory hard reset" below it: "Permanently Erase user Data & Reset settings?" and below this: "Press power key to confirm, and any other key to cancel". Seems not like recovery with a lot of options touch buttons and things. How can i check for correct installation of the AutoRec?
Click to expand...
Click to collapse
oh to confirm if custom recovery installed correctly on the factory reset screen click power button 3 times and it should boot into custom recovery or download an app from playstore like rom manager and use the option reboot into recovery
XxZombiePikachu said:
oh to confirm if custom recovery installed correctly on the factory reset screen click power button 3 times and it should boot into custom recovery or download an app from playstore like rom manager and use the option reboot into recovery
Click to expand...
Click to collapse
Is this the way with 3 times power press and the place from where how i flash the modem, the rom and the rom apps?
Android-rocks said:
Is this the way with 3 times power press and the place from where how i flash the modem, the rom and the rom apps?
Click to expand...
Click to collapse
you boot into custom recovery by turning phone off then hold volume down+power it will show factory reset screen then press power button three times and it should boot into custom recovery from there you wipe data/dalvik/cache then flash modem/rom/gapps and reboot
thrust heuralt
XxZombiePikachu said:
you boot into custom recovery by turning phone off then hold volume down+power it will show factory reset screen then press power button three times and it should boot into custom recovery from there you wipe data/dalvik/cache then flash modem/rom/gapps and reboot
Click to expand...
Click to collapse
Thank you dear XxZombiePikachu! It worked all fantastic, the new google rom as well :victory::victory:
I also did, as suggested from the modem thread, also EFS backup before doing the modem update. The thread for this is:
http://forum.xda-developers.com/showthread.php?t=2451390
All worked very nice And after all i didnt ditched the bricked LG Thank you thanks once again! It is good to be here!
Android-rocks said:
Thank you dear XxZombiePikachu! It worked all fantastic, the new google rom as well :victory::victory:
I also did, as suggested from the modem thread, also EFS backup before doing the modem update. The thread for this is:
http://forum.xda-developers.com/showthread.php?t=2451390
All worked very nice And after all i didnt ditched the bricked LG Thank you thanks once again! It is good to be here!
Click to expand...
Click to collapse
Don't forget to edit thread name to say solved and glad I could help
Sent from my LG-D800 running stock kk, rooted with philz using XDA app
XxZombiePikachu said:
Don't forget to edit thread name to say solved and glad I could help
Sent from my LG-D800 running stock kk, rooted with philz using XDA app
Click to expand...
Click to collapse
I am sorry i tried but couldnt figure out, how can be the title changed?
Android-rocks said:
I am sorry i tried but couldnt figure out, how can be the title changed?
Click to expand...
Click to collapse
edit the title of the first post and it will change the name of the thread
XxZombiePikachu said:
edit the title of the first post and it will change the name of the thread
Click to expand...
Click to collapse
I tried by editing the pot but couldnt figure out where to edit the title of the first post, how do you do that?
Android-rocks said:
I tried by editing the pot but couldnt figure out where to edit the title of the first post, how do you do that?
Click to expand...
Click to collapse
Click on edit/delete on your first post, click on advanced and you should be able to edit title there
Sent from my LG-D800 running stock kk, rooted with philz using XDA app
This used to be easy.
After 8 hours yesterday I think I managed to root the phone. CWM/TWRP will not install. At all, under any method. Rom manager, goo manager, I now get this stupid message that says that "an application attempted to access something unauthorized and has been blocked" over and over.
Just trying to flash CM11 rom. Guess I need to learn how to sideload or something? I physically can't get my phone to recovery mode other than the stock Android, which does not have the "flash zip from sdcard" option.
For the love of god help me. My phone stopped working around 2 pm yesterday and I seriously can't believe I'm about to be going into day 2 of this, so rather than drive myself crazy i'm going to wait for help
bump please help should be simple
Hi,
Please, don't panic! Panic is your worst enemy . First, give a good read here: http://forum.xda-developers.com/showthread.php?t=2419762. Then try again . It's very likely Knox is blocking your TWRP/CWM installation, that's why you receive this message.
All the best,
~Lord
XxLordxX said:
Hi,
Please, don't panic! Panic is your worst enemy . First, give a good read here: http://forum.xda-developers.com/showthread.php?t=2419762. Then try again . It's very likely Knox is blocking your TWRP/CWM installation, that's why you receive this message.
All the best,
~Lord
Click to expand...
Click to collapse
thanks
knox is disabled
root is gained
su is installed
rom manager and goo manager installed
when i downloaded the CM rom from goo manager and try to install it, the phone restarts in download mode and just sits there...
Damani311 said:
thanks
knox is disabled
root is gained
su is installed
rom manager and goo manager installed
when i downloaded the CM rom from goo manager and try to install it, the phone restarts in download mode and just sits there...
Click to expand...
Click to collapse
Hi,
You need to flash the recovery via Odin . After flashing the recovery via Odin you'll be able to flash the ROM normally .
All the best,
~Lord
XxLordxX said:
Hi,
You need to flash the recovery via Odin . After flashing the recovery via Odin you'll be able to flash the ROM normally .
All the best,
~Lord
Click to expand...
Click to collapse
tried flashing four different CWM tars, all are failing.
XxLordxX said:
Hi,
You need to flash the recovery via Odin . After flashing the recovery via Odin you'll be able to flash the ROM normally .
All the best,
~Lord
Click to expand...
Click to collapse
tried flashing four different CWM tars, all are failing.
also trying to flash TWRP
its just all failing on the install
Hi,
Please post your installation issue on the Galaxy S4 Help Thread there might be someone better than me to help you there. Also are you sure you're flashing the right files and using the right method? Did you try another USB Cable? Did you try another Odin version? It all can contribute to the fail.
~Lord
XxLordxX said:
Hi,
Please post your installation issue on the Galaxy S4 Help Thread there might be someone better than me to help you there. Also are you sure you're flashing the right files and using the right method? Did you try another USB Cable? Did you try another Odin version? It all can contribute to the fail.
~Lord
Click to expand...
Click to collapse
its the official samsung cable. and yes i tried others
tried other versions of odin as well
and different versions of both twrp and cwm
its crazy i tells ya xD
If it fails to flash true Odin, then you are doing something wrong.
- Different pc
- Reinstall drivers
- Different cable
- Different usb port
- Make sure kies is not running in the background
What are you running? Windows 8? Try a windows 7 pc.
Post the details of the error you are getting.
Also when the flash goes succesfull, but you still don't have a custom recovery, then uncheck auto-reboot.
can someone please link me to a guaranteed working version of a flashable recovery for odin ?
I know its a lot to ask but I've actually gone through almost that entire list you listed
tried diff cables
no kies runnning
on windows 7
drivers been installed twice
maybe i should try the other port, but in case that doesnt work can anyone just link me? sorry i've just never had this much problems with this, must be b/c of the new security knox update or w/e in oct of last year. Last June I did all this in about 15 minutes....
I had the same trouble with the knox crap yesterday, the only way I could get it rooted and/or with custom recovery was to use the Cyanogen windows installer, then when CM booted I then rebooted into recovery and installed a different rom from there. :good:
dwarfer66 said:
I had the same trouble with the knox crap yesterday, the only way I could get it rooted and/or with custom recovery was to use the Cyanogen windows installer, then when CM booted I then rebooted into recovery and installed a different rom from there. :good:
Click to expand...
Click to collapse
that's crazy
so where do i find this windows installer? i'm just trying to put CM on there so I suppose this would work
Hi i know youve already said said its officail cable but im saying try another different s4 cable. Because when i was installing recovery or anything it wouldnt let me (i thought i had original white s4 cable) but then i got my dads cable (hes gt s4) and it worked instantly. These fake cables are at large and its very very difficult to tell if its original.
Also like previous guy said using a different computer/laptop also helps i know because ive flashed my phones since day 1.
GL and plz let me know if u managed to fix it another way as its always good to try new options when others fail.
189cutter said:
Hi i know youve already said said its officail cable but im saying try another different s4 cable. Because when i was installing recovery or anything it wouldnt let me (i thought i had original white s4 cable) but then i got my dads cable (hes gt s4) and it worked instantly. These fake cables are at large and its very very difficult to tell if its original.
Also like previous guy said using a different computer/laptop also helps i know because ive flashed my phones since day 1.
GL and plz let me know if u managed to fix it another way as its always good to try new options when others fail.
Click to expand...
Click to collapse
alright it'd be awesome if someone can post a link to the files the work, for sure.
CM windows installer
CWM odin tar file
TWRP odin tar file
Damani311 said:
alright it'd be awesome if someone can post a link to the files the work, for sure.
CM windows installer
CWM odin tar file
TWRP odin tar file
Click to expand...
Click to collapse
http://www.cyanogenmod.org/ then click the start button and follow the instructions.
It will get you to download the installer (or http://dist01.slc.cyngn.com/CMInstaller.msi?t=1403660099360) the click it to run, It may download an update for itself, then it will download recovery, operating system, gapps, then start to install everything. About 300mb altogether.
That way you don't need the tar files, just search on this sight for flashable from recovery for the recovery files you want. (I use the touch versions myself).
dwarfer66 said:
http://www.cyanogenmod.org/ then click the start button and follow the instructions.
It will get you to download the installer (or http://dist01.slc.cyngn.com/CMInstaller.msi?t=1403660099360) the click it to run, It may download an update for itself, then it will download recovery, operating system, gapps, then start to install everything. About 300mb altogether.
That way you don't need the tar files, just search on this sight for flashable from recovery for the recovery files you want. (I use the touch versions myself).
Click to expand...
Click to collapse
thanks, but naturally this would be too easy
says: "not supported on your device"
a freaking S4 AT&T! what the ****?
From what I've read AT&T have locked bootloaders. Glad I have an unlocked Australian version!
Yeah so if anyone can still find a way to help me that'd be awesome. Wasted two days already and rather not be stuck with stock
Damani311 said:
Yeah so if anyone can still find a way to help me that'd be awesome. Wasted two days already and rather not be stuck with stock
Click to expand...
Click to collapse
So do you have an AT&T phone? If you do, you are in the wrong section of the forum.
found 【docomo】GALAXY Note Edge(SC-01G) root - RECOVERY TWRP - fireware
I already tried root and RECOVERY TWRP on my unlocked N915D and every goes OK
■ROOT
1. Download cf-auto-root-for SC-01G.zip
2. Flash it in PDA with Odin 3.07
■ the same steps on RECOVERY TWRP
■Fireware in the source I didn't try it
All files in the link attached
NOTE :
I can't post any link because I should have 10 post before I do that xda policy
I'm trying to root my edge but I can't get these files from the links. do you still have this?
Mikekan13 said:
I'm trying to root my edge but I can't get these files from the links. do you still have this?
Click to expand...
Click to collapse
yes i have it
I dream with the day that my Verizon Note Edge will get root...
This method to get root also works for the KDDI AU SCL24 Note Edge! I found the file on a vietnamese website that said it also worked for SCL24 / SM-N915J.
Confirmed working as well.
root files for edge
pg2150 said:
yes i have it
[email protected]
send me exactly you need
Click to expand...
Click to collapse
hi sir..may i ask for the files as well for Note Edge rooting..the files in the links have been deleted
kindly email it to [email protected] if it's ok..thanks
pg2150 said:
found 【docomo】GALAXY Note Edge(SC-01G) root - RECOVERY TWRP - fireware
I already tried root and RECOVERY TWRP on my unlocked N915D and every goes OK
■ROOT
1. Download cf-auto-root-for SC-01G.zip
2. Flash it in PDA with Odin 3.07
■ the same steps on RECOVERY TWRP
■Fireware in the source I didn't try it
All files in the link attached
NOTE :
I can't post any link because I should have 10 post before I do that xda policy
Click to expand...
Click to collapse
Do you mind making the files available to me as well? I need:
TWRP RECOVERY :
openrecovery-twrp-2.8.1.1-trltetmo.img.tar?dl=0
FIRmWARE :
SC01GOMU1ANJ3.zip.
Thanks.
---------- Post added at 07:28 AM ---------- Previous post was at 06:50 AM ----------
ihavenoeffort said:
This method to get root also works for the KDDI AU SCL24 Note Edge! I found the file on a vietnamese website that said it also worked for SCL24 / SM-N915J.
Confirmed working as well.
Click to expand...
Click to collapse
IHNE, can you send me that link to the site you found the files? [email protected]. Thanks.
Working Link for firmware SC-01G ?
pg2150 said:
found 【docomo】GALAXY Note Edge(SC-01G) root - RECOVERY TWRP - fireware
I already tried root and RECOVERY TWRP on my unlocked N915D and every goes OK
■ROOT
1. Download cf-auto-root-for SC-01G.zip
2. Flash it in PDA with Odin 3.07
■ the same steps on RECOVERY TWRP
■Fireware in the source I didn't try it
All files in the link attached
NOTE :
I can't post any link because I should have 10 post before I do that xda policy
Click to expand...
Click to collapse
Sorry, but could I bother you to send the linked files to [email protected]?
I would really appreciate it! Thanks for your time!
P.s. Just to clarify, this will also work for the SCL24, correct?
kokuon said:
P.s. Just to clarify, this will also work for the SCL24, correct?
Click to expand...
Click to collapse
The root method does work. I'm not sure about the recovery part though.
**edit**
I went to this website and downloaded TWRP version 2.8.5.0 and it works. As for the functionality, i'm not sure. I tried doing the backup and it was working but then the screen shut off but the back and home buttons were still lit up and the screen would not turn back on with the power button so i just pulled the battery. Also of note, there are two strips of bright blue on either side of the main UI. There was an error that said the UI could not load properly, but like i said, it was starting to backup. I'm more of a CWM kind of person so i am going to try the T-Mobile version of that and see what happens. http://techerrata.com/file/twrp2/trltetmo/openrecovery-twrp-2.8.5.0-trltetmo.img.tar
Good luck.
**edit2**
I turned off the screen timeout feature and the backup went fine. I'm going to test to see if I can restore from that backup tonight.
ihavenoeffort said:
The root method does work. I'm not sure about the recovery part though.
**edit**
I went to this website and downloaded TWRP version 2.8.5.0 and it works. As for the functionality, i'm not sure. I tried doing the backup and it was working but then the screen shut off but the back and home buttons were still lit up and the screen would not turn back on with the power button so i just pulled the battery. Also of note, there are two strips of bright blue on either side of the main UI. There was an error that said the UI could not load properly, but like i said, it was starting to backup. I'm more of a CWM kind of person so i am going to try the T-Mobile version of that and see what happens.
Good luck.
**edit2**
I turned off the screen timeout feature and the backup went fine. I'm going to test to see if I can restore from that backup tonight.
Click to expand...
Click to collapse
Thanks, I'll give it a shot. Just to make sure I'm not misunderstanding, this recovery is what will grant me root, correct? It's my first time messing with CWM so I'm a bit worried.
custy3000 said:
Thanks, I'll give it a shot. Just to make sure I'm not misunderstanding, this recovery is what will grant me root, correct? It's my first time messing with CWM so I'm a bit worried.
Click to expand...
Click to collapse
Whoa wait. First you need to follow the root method by flashing the sc-01g recovery. Boot the phone and install/update busy box and SuperSU. Then you can reflash to twrp or cwm.
custy3000 said:
Thanks, I'll give it a shot. Just to make sure I'm not misunderstanding, this recovery is what will grant me root, correct? It's my first time messing with CWM so I'm a bit worried.
Click to expand...
Click to collapse
ihavenoeffort said:
Whoa wait. First you need to follow the root method by flashing the sc-01g recovery. Boot the phone and install/update busy box and SuperSU. Then you can reflash to twrp or cwm.
Click to expand...
Click to collapse
Ah, ok I understand now. Thanks for the help!
Now if only somebody could provide me with SC01GOMU1ANJ3.zip... I'll love you long time!
custy3000 said:
Ah, ok I understand now. Thanks for the help!
Click to expand...
Click to collapse
I got it, thanks a lot!
Just remember that if you want osaifu-keitai to keep working, you will need to flash Stock Recovery.
golfinry said:
Just remember that if you want osaifu-keitai to keep working, you will need to flash Stock Recovery.
Click to expand...
Click to collapse
Do you have a link to the stock recovery to flash?
HyoImowano said:
Do you have a link to the stock recovery to flash?
Click to expand...
Click to collapse
Please see updated guide.
Thank you!
when i get into Recovery Mode it allways error "recovery seandroid enforcing".how can i fix it?:crying:
I couldn't find the correct thread to upload this, its a newer model of the J700P it could be from Sprint or Boostmobile either way here is the stock odin firmware i seen it in the Samsung kitchen so why not share it
This is Nougat firmware
AP_J727PVPU1AQB9_REPAIR_user_low_ship_MULTI_CERT_meta.tar.md5
BL_J727PVPU1AQB9_REPAIR_user_low_ship_MULTI_CERT.tar.md5
CP_J727PVPU1AQB9_REPAIR_user_low_ship_MULTI_CERT.tar.md5
CSC_SPT_J727PSPT1AQB9_REPAIR_user_low_ship_MULTI_CERT.tar.md5
https://www.androidfilehost.com/?fid=745425885120715469
Note:
This is either for Sprint or Boostmobile
Has anyone used this???
Sent from my SM-J727P using XDA-Developers Legacy app
JeepinxJosh said:
Has anyone used this???
Sent from my SM-J727P using XDA-Developers Legacy app
Click to expand...
Click to collapse
yes, quite afew times
will this work for Virgin mobile as well? I haven 't had a need yet...but knowing meeee...eventually.
Worked for my VM version of the phone. I think the phone sets itself from the network(Sprint, Boost, Virgin) when you activate it.
Very well ,Confirmed Works on boost mobile only method. helps me get off or bypass screen massage Blocked by FRP ,flashed with Odin thanks
Thank you very much! Also for the confirmation it works..... (i did hit the thanks button)
Downloading now,....... Just got this device due to a insurance claim so this is a completelt new phone to me and I really want to either start or add to one specific form till we get a complete spot on the fourms.... Any way my ideal or a good ideal for us is to add everthing that is confirmed working as on today and add it to one fourm and reserve like 10 entrys for specific problems and the solutions. Or just in a easy format so everything is not so confusing till we get our device a Fourm started instead of a thread thats confusing and hard to follow.... Anyone with me???? Its a new device and we need development so bad.. im stuck in a bootloop as of now and cant find the info to help me and its so aggervating.... someone will have to maintain it of course
---------- Post added at 09:01 PM ---------- Previous post was at 08:33 PM ----------
quick question...... downloaded the stock firmware but not sure about something....
do I add every file to odin or just the AP file??? or what? cause im use to just flashing in the AP spot in odin. Do I just load the AP REPAIR file i downloaded in the zip file? or do I add all files to odin??? Im alil confused.... PLEASE AND THANK YOU FOR THE HELP
just never really had to flash any other files but the AP slot....
Easy instruction would be very helpfull please
UPDATE UPDATE
I just went ahead and added all dled files in the folder to Odin and everythings good! Thanks again
FLASH ALL FILES
still getting error
XxTeXx07xX said:
Thank you very much! Also for the confirmation it works..... (i did hit the thanks button)
Downloading now,....... Just got this device due to a insurance claim so this is a completelt new phone to me and I really want to either start or add to one specific form till we get a complete spot on the fourms.... Any way my ideal or a good ideal for us is to add everthing that is confirmed working as on today and add it to one fourm and reserve like 10 entrys for specific problems and the solutions. Or just in a easy format so everything is not so confusing till we get our device a Fourm started instead of a thread thats confusing and hard to follow.... Anyone with me???? Its a new device and we need development so bad.. im stuck in a bootloop as of now and cant find the info to help me and its so aggervating.... someone will have to maintain it of course
---------- Post added at 09:01 PM ---------- Previous post was at 08:33 PM ----------
quick question...... downloaded the stock firmware but not sure about something....
do I add every file to odin or just the AP file??? or what? cause im use to just flashing in the AP spot in odin. Do I just load the AP REPAIR file i downloaded in the zip file? or do I add all files to odin??? Im alil confused.... PLEASE AND THANK YOU FOR THE HELP
just never really had to flash any other files but the AP slot....
Easy instruction would be very helpfull please
UPDATE UPDATE
I just went ahead and added all dled files in the folder to Odin and everythings good! Thanks again
FLASH ALL FILES
Click to expand...
Click to collapse
OK, so i flashed all 4 files in odin with my Boost mobile samsung galaxy SM-J727P and im still getting an error...im stuck in boot loop as well.someone please help. thanks
Does anyone knows if it's possible to unlock it with Z3X?
The extra csc file or the other so file named home-ap
AtlasTheGod said:
OK, so i flashed all 4 files in odin with my Boost mobile samsung galaxy SM-J727P and im still getting an error...im stuck in boot loop as well.someone please help. thanks
Click to expand...
Click to collapse
Flash the home ap file I believe instead....
You see the file?
UPDATE UPDATE
I just went ahead and added all dled files in the folder to Odin and everythings good! Thanks again
FLASH ALL FILES
I have followed all steps. I am using the J727p for boost. It turned on loaded up normally for me then when I restarted the phone it is now stuck in a boot load it gets to the Samsung screen then shuts off and repeats.
XxTeXx07xX said:
Flash the home ap file I believe instead....
You see the file?
UPDATE UPDATE
I just went ahead and added all dled files in the folder to Odin and everythings good! Thanks again
FLASH ALL FILES
Click to expand...
Click to collapse
What build were you on when flashed it ???
If you were on J727PVPU2AQI3 YOUR STUCK TILL YOU GET THE NEW FIRMWARE FILE !!
JUSMEJOSE said:
I couldn't find the correct thread to upload this, its a newer model of the J700P it could be from Sprint or Boostmobile either way here is the stock odin firmware i seen it in the Samsung kitchen so why not share it
This is Nougat firmware
AP_J727PVPU1AQB9_REPAIR_user_low_ship_MULTI_CERT_meta.tar.md5
BL_J727PVPU1AQB9_REPAIR_user_low_ship_MULTI_CERT.tar.md5
CP_J727PVPU1AQB9_REPAIR_user_low_ship_MULTI_CERT.tar.md5
CSC_SPT_J727PSPT1AQB9_REPAIR_user_low_ship_MULTI_CERT.tar.md5
https://www.androidfilehost.com/?fid=745425885120715469
Note:
This is either for Sprint or Boostmobile
Click to expand...
Click to collapse
this fixed my blinking:
rpmb provisioned ...pink
rpmb fuse: 1 ...yellow
recovery booting ...blue
This does not work. I've tried it multiple times on multiple versions of Odin. This will not work if you use Boost Mobile. It either fails, hangs at flashing boot.img, or hangs at SetupConnection.
Galaxy J727P
spc_hicks09 said:
This does not work. I've tried it multiple times on multiple versions of Odin. This will not work if you use Boost Mobile. It either fails, hangs at flashing boot.img, or hangs at SetupConnection.
Click to expand...
Click to collapse
Here try these four file ! Don't use the fifth file if your not on Sprint it not needed in most cases !
https://www.androidfilehost.com/?w=files&flid=244089
peter couniaz said:
Here try these four file ! Don't use the fifth file if your not on Sprint it not needed in most cases !
https://www.androidfilehost.com/?w=files&flid=244089
Click to expand...
Click to collapse
Thank you, I will try them now and see what happens.
XxTeXx07xX said:
Flash the home ap file I believe instead....
You see the file?
UPDATE UPDATE
I just went ahead and added all dled files in the folder to Odin and everythings good! Thanks again
FLASH ALL FILES
Click to expand...
Click to collapse
Anyone have any luck with these? I'd really like to bypass frp on this
spc_hicks09 said:
Thank you, I will try them now and see what happens.
Click to expand...
Click to collapse
So do you have any luck? trying to get stock firmware on my device to bypass FRP boot.img error
Almost bricked...and then this post saved my friggin day!
peter couniaz said:
Here try these four file ! Don't use the fifth file if your not on Sprint it not needed in most cases !
This works to get you back to stock from bootloop. I tried my hand at rooting this little SOB (TWRP,Magisk) and tripped the Knox counter bc I forgot to wipe it. Reboot came up with "Validation Failure" and I was stuck. I stumbled over this post and with nothing to lose other than $130.
First piece of advice...Use Odin 3.12.3 ONLY!! I tried the latest version and it didn't work. Download the files, place them in the appropriate boxes and flash. reboot into recovery, wipe the cache/data and you should be good. Mine took quite a while after hanging on the Boost mobile splash screen, but about 3 reboots later, it brought me to the configuration screen. It's up, running and I even got the OTA software update, but then again, it is stock.
Click to expand...
Click to collapse
J727P
ListlessSpectre said:
peter couniaz said:
Here try these four file ! Don't use the fifth file if your not on Sprint it not needed in most cases !
This works to get you back to stock from bootloop. I tried my hand at rooting this little SOB (TWRP,Magisk) and tripped the Knox counter bc I forgot to wipe it. Reboot came up with "Validation Failure" and I was stuck. I stumbled over this post and with nothing to lose other than $130.
First piece of advice...Use Odin 3.12.3 ONLY!! I tried the latest version and it didn't work. Download the files, place them in the appropriate boxes and flash. reboot into recovery, wipe the cache/data and you should be good. Mine took quite a while after hanging on the Boost mobile splash screen, but about 3 reboots later, it brought me to the configuration screen. It's up, running and I even got the OTA software update, but then again, it is stock.
Click to expand...
Click to collapse
You may want to look at this link if you haven't already the last Rom there is my daily drive but you should read threw it let me know if you need any help !
https://forum.xda-developers.com/galaxy-j7/development/updated-tweaked-deodexed-rom-galaxy-t3773219
Click to expand...
Click to collapse