Hi Guys,
Please help me with this issue, i have samsung S4 GT-I9505 and the thing is my phone stucks on samsung logo and every time I reboot it just stick on that logo. I have tried using ODIN to fix it by flashing but I always got this "FAILS" result. Im not sure if what i did was right and also if I download the correct firmware since I was not able to see from the phones settings. Can you please help me on this.
thanks.
Try a different USB cable.
Try a different USB port.
Try a different Windows or PC altogether.
Try a, different Odin version.
Verify that the model # in download mode is the gt-i9505.
First install your phone
Phone INFO from playstore then open firmware browser and then download correct firmware
And again flash by Odin
Related
I have just bricked my newly-bought Note 3 (N900).
I wanted to flash the latest version of Note 3 via Odin 3.08 (from 4.3 to 4.4.2). I made a big mistake as I didn't enable the "USB DEBUGGING" mode before go to download mode.
I clicked start in Odin and it show FAIL!!!
After I restart the phone all I see on the screen is the message "Firmware upgrade encountered an issue Please select recovery mode in Kies & try again."
I tried to recover it through Kies, but the it shows the phone is not connected or not support. Meaning the Kies cannot communicate with the phone at all.
I also tries to flash in Odin many times, but it still fails.
Please!!! Can anyone here give me some solution.
Thanks.
boycam said:
I have just bricked my newly-bought Note 3 (N900).
I wanted to flash the latest version of Note 3 via Odin 3.08 (from 4.3 to 4.4.2). I made a big mistake as I didn't enable the "USB DEBUGGING" mode before go to download mode.
I clicked start in Odin and it show FAIL!!!
After I restart the phone all I see on the screen is the message "Firmware upgrade encountered an issue Please select recovery mode in Kies & try again."
I tried to recover it through Kies, but the it shows the phone is not connected or not support. Meaning the Kies cannot communicate with the phone at all.
I also tries to flash in Odin many times, but it still fails.
Please!!! Can anyone here give me some solution.
Thanks.
Click to expand...
Click to collapse
make sure kies is not running then try odin again
jaythenut said:
make sure kies is not running then try odin again
Click to expand...
Click to collapse
I tried many time already, but still fail. I think because the usb debugging mode was not enable at the first place.
Thank anyway.
boycam said:
I tried many time already, but still fail. I think because the usb debugging mode was not enable at the first place.
Thank anyway.
Click to expand...
Click to collapse
Usb debugging has nothing to do with it failing when you're using odin. Try a different version of odin.
A simple reflash via Odin 1.85 or 3.07/3.04 will fix it.
boycam said:
I have just bricked my newly-bought Note 3 (N900).
I wanted to flash the latest version of Note 3 via Odin 3.08 (from 4.3 to 4.4.2). I made a big mistake as I didn't enable the "USB DEBUGGING" mode before go to download mode.
I clicked start in Odin and it show FAIL!!!
After I restart the phone all I see on the screen is the message "Firmware upgrade encountered an issue Please select recovery mode in Kies & try again."
I tried to recover it through Kies, but the it shows the phone is not connected or not support. Meaning the Kies cannot communicate with the phone at all.
I also tries to flash in Odin many times, but it still fails.
Please!!! Can anyone here give me some solution.
Thanks.
Click to expand...
Click to collapse
USB Debugging has nothing to do with odin flash, make sure while flashing below steps.
1. Update boot loader is selected in odin.(Edit:for single file not required)
2. Disable antivirus.
3. make sure note 3 drivers are installed.
4. kies not running in bag round.
5.Clear Factory Data & Catch before flash.
if all of those step fail..
try to flash ur rom on other computer or laptop
Sent from my SM-N900 using XDA Premium 4 mobile app
radicalisto said:
A simple reflash via Odin 1.85 or 3.07/3.04 will fix it.
Click to expand...
Click to collapse
Thankx man itis worked:good::good:
jdomadia said:
USB Debugging has nothing to do with odin flash, make sure while flashing below steps.
1. Update boot loader is selected in odin.(Edit:for single file not required)
2. Disable antivirus.
3. make sure note 3 drivers are installed.
4. kies not running in bag round.
5.Clear Factory Data & Catch before flash.
Click to expand...
Click to collapse
tried flashin with diff odin versions, was not working, tried ver 1.85, cause it lets you select update boot loader.......and BAM,,it worked on my tmobile tab 4, now i c.an wipe the tears off the key board, thanks, didnt do # 5 tho, was rooting the tab with cf auto.
markap99 said:
tried flashin with diff odin versions, was not working, tried ver 1.85, cause it lets you select update boot loader.......and BAM,,it worked on my tmobile tab 4, now i c.an wipe the tears off the key board, thanks, didnt do # 5 tho, was rooting the tab with cf auto.
Click to expand...
Click to collapse
You've indeed saved my day... I've been searching high and low, installing various versions of Odin3, downloading tonnes of tar, tarmd5, zip, etc.!
Pardon me for my ignorance, but I never intended to root my cell phone in the first place. I was merely following what Kies suggested, "A New Firmware, Wanna Upgrade?" Oh, truly? Gee, thanks! And **** it, it screwed up my GT-N7000, saying "Firmware upgrade encountered an issue..." and my cell phone never saw the daylight again, regardless how I started it, factory-reset mode wasn't possible at all, only download mode could be started up. Tried with various methods of Odin3 on multiple ROMS, to no avail, until I read your short reply. BAM! (As you put it...)
Thanks a bunch, mate!
I have a similar issue with my sm n900. Lost my imei and baseband, i needed to flash a custom rom to get my baseband before working on the imei, after flashing via odin phone boots to samsung logo then goes blank. And recovery says E failed to mount efs . But i need to use adb on my pc. So how can i possibly enabe usb debugging in order for adb to find my device?
Flashing a stock ROM from sammobile.com via Odin does not require USB debugging. Flashing a stock ROM will flash everything, including modem, bootloader, and recovery.
My N900 Bricked
I am unable to Go to download mode not even the charging symbol too
no Luck at all phone is not starting need a Unbrick or help me how to get it sorted
galaxy Note 3 Sm N900
Tried to open the phone to short the wire but the shorting mentioned in all the imagees doesnt match the design of the phone internal
can some one tell me which points to short to start the phoen in Ext sd mode
or any help would help
Guys I was willing to flash CF Auto Root on my i9505, but It stucks at PIT Mapping, in download mode when process gets started there's another entry appeares below "emmc burst mode enabled" which is Start 224, 1440, now my phone is stucked to i9505 logo, and even trying to flash newest firmware gets stucked in PIT file Mapping, I can't do any thing to my phone, only it's able to reach to download mode, and nothing else, it doesn't boot to recovery either, everything gets stuck to PIT Mapping, my note 2 running well on same computer
Alipk52 said:
Guys I was willing to flash CF Auto Root on my i9505, but It stucks at PIT Mapping, in download mode when process gets started there's another entry appeares below "emmc burst mode enabled" which is Start 224, 1440, now my phone is stucked to i9505 logo, and even trying to flash newest firmware gets stucked in PIT file Mapping, I can't do any thing to my phone, only it's able to reach to download mode, and nothing else, it doesn't boot to recovery either, everything gets stuck to PIT Mapping, my note 2 running well on same computer
Click to expand...
Click to collapse
try another Odin or firmware
try different port
try different cable
I never had problems with Odin
pda4g said:
try another Odin or firmware
try different port
try different cable
I never had problems with Odin
Click to expand...
Click to collapse
I'd tried your suggested option no.1, 2, with USB cable I will find that, but my Note 2 is still working perfectly with what I have, I thought Odin supported version maybe different for different devices, so I changed among 3.04, 3.07 & 3.09 I'll see about the cable
pda4g said:
try another Odin or firmware
try different port
try different cable
I never had problems with Odin
Click to expand...
Click to collapse
Hey bro...problem solved, and the issue was the one i have ignored i.e. Data Cable, grabed my friend's Cable and Odin started working as it should, my Note 2 is too good...accept everything in any condition...where as i9505 needs everything perfect
I recently got the update for lollipop on samsung kies 3.
I have an i9500 s4.
I got into my pc and had gone through the process and for some random reason my samsung kies popped out an error and the firmware upgrade failed so i had to do emergency recovery. Now the problem is that the emergency software recovery isnt working properly and so my phone has one error screen which i have posted as an attachment. Kindly help me through this process as i need this phone crucially.
Flash ROM via Odin (with pit)
thanks for replying
please give me a link to a detailed tutorial (with pit)
and my my phone is not rooted.
Everything you need is in the general section
Reply with help (SOS)
i tried flashing a lollipop firmware with odin v3.10.6 for about 20 times.
all i get is a xmit data write fail.
my phone can't start or go into recovery mode, all it can go to is download mode.
is there a way where i can reset my device completely or just upgrade to lollipop.
my s4 is a gt i9500 and it isn't rooted.
please get me a solution and a decent one.
Thanks for all the help in advance. please help :crying:
Sounds like you have a bad connection
Change your cable and USB connection
thanks dsa i got the fix
please help me expert how revive againt may samsung s4,,,i cannot flash any old rom or new rom ,,,
It's not flashing because the phone is not recognized by Odin as nothing is assigned under COM.
Do you have the samsung usb drivers for the phone installed?
lilnash16 said:
please help me expert how revive againt may samsung s4,,,i cannot flash any old rom or new rom ,,,
Click to expand...
Click to collapse
Only with the Pit file you can solve it .... find the appropriate Pit file for your device and flash it via Odin ..
Sent from my SM-G935F using Tapatalk
The pit file will not solve the problem if the phone is not recognized by Odin.
The key thing here is to get the computer to recognize the phone, as mentioned by @audit13. Change USB ports, use the stock cable, and ensure the Samsung drivers are installed. If you can get the computer to recognize the phone, flash the ROM using the BL slot, not the AP slot. That should resolve the issue on the device.
Hello guys,
just received S7 (G930V) and I need to fix it. previous owner tried to flash exynos? rom onto it so now im stuck here (see image) I can¨t use ODIN, because it didnt recognize this device, (but Korean 930s does) and even it restarting automatically every few seconds and its shows "This is old binary, please update latest binary! (boot.img)"
Can you help me with this please?
SkopiX said:
Hello guys,
just received S7 (G930V) and I need to fix it. previous owner tried to flash exynos? rom onto it so now im stuck here (see image) I can¨t use ODIN, because it didnt recognize this device, (but Korean 930s does) and even it restarting automatically every few seconds and its shows "This is old binary, please update latest binary! (boot.img)"
Can you help me with this please?
Click to expand...
Click to collapse
Install all needed drivers, and dowload latest firmware here's link (you can try to flash universal snapdragon firmware):
Download Samsung Galaxy S7 SM-G930U USC USA (US Cellular) G930UUES8CRK1 firmware
Fast download latest Samsung Galaxy S7 firmware SM-G930U from USA (US Cellular) with G930UUES8CRK1 and Android version 8.0.0
www.sammobile.com
Thank you for your reply, but I cant flash new fw because my PC dont see phone and phone itself cant go to .proper download mode, only to this fail screen. I have drivers installed and PC and odin sees other galaxy s7 so its probably not driver issue..
SkopiX said:
Thank you for your reply, but I cant flash new fw because my PC dont see phone and phone itself cant go to .proper download mode, only to this fail screen. I have drivers installed and PC and odin sees other galaxy s7 so its probably not driver issue..
Click to expand...
Click to collapse
What is your Odin version???
Try this one:
Odin3 v3.12 (PrinceComsy).zip | Tool by psouza4 for Galaxy S7
PrinceComsy's Odin3 v3.12 hash skip version.
androidfilehost.com
I tried this one, but still, if I cant go to download mode, how can odin flash anything? So still no succes
SkopiX said:
I tried this one, but still, if I cant go to download mode, how can odin flash anything? So still no succes
Click to expand...
Click to collapse
If you press power more than 10 sec. and press vol- + home it drops you back to this mode???
yes, EVERY action ends on this screen if I hold power more than 1 sec +-, it just restarting and restarting...
Hey guys, just a fast info:
I bought this special cable from aliexpress
https://www.aliexpress.com/item/32966775653.html?spm=a2g0s.9042311.0.0.32dd4c4dxNJCmM
thanks to this I could boot into DL mode (which I couldnt before) and I flashed newest USA FW with odin
So now, its working!