As we all know Huawei released the nougat beta for honor 8 (for UK and India for now) and let's be honest. It's beautiful right? But not all features work just yet (yeah I talking about you guys) Bluetooth and NFC. I'm sure Huawei has a good reason why.
So many users both bootloader locked and unlocked may want to downgrade. So here's the procedures.
Bootloader Locked.
1. Download your Marshmallow package (for your region) my is NEE (B120)
2. Extract the zip in a folder called dload if it doesn't exist create it to the EXTERNALSD! Not the internal one!
3. Once done Power down the Phone and power it up while holding both Volume up and Down at the same Time. Now the downgrade Procedure should work*
*IF downgrade Procedure didn't work download another package because you most likely downloaded the wrong package.
4. Reboot into recovery and wipe DATA factory reset else it won't boot!
UNLOCKED BOOTLOADER.
Do the same procedure as locked bootloader to the step 3
4. Reboot into Fastboot and Re unlock your device. NOTE HOLD POWER DOWN AFTER YOU SELECTED YES! So it boot back to bootloader mode (fastboot)
5. Flash twrp recovery
7. Now you can either restore one of your previous backup or wipe your phone without wiping complete internal sd. I prefer restore previous backup so you won't have to setup your device again.
Hope this covers things up for all of you.
Regards
Sent from my FRD-L09 using Tapatalk
RESERVED for info about correct download packages
Nordic Europe firmware https://hidrive.strato.com/api/sharelink/download?id=8CFjlCJ3
Some more packages is available http://forum.xda-developers.com/honor-8/development/firmware-huawei-honor-8-stock-firmware-t3470454
If you used another firmwara post it here
Sent from my FRD-L09 using Tapatalk
I wasn't aware the UK beta had started?
Either way thanks for the info
Hi I'm curious as to how you found the specific software for your region? And also, is there any issue with flashing one not from the right region? Thanks
mikev190 said:
I wasn't aware the UK beta had started?
Either way thanks for the info
Click to expand...
Click to collapse
You'd missed that thread I guess or its leaked [emoji14] but afaik it has started.
dmooney7291 said:
Hi I'm curious as to how you found the specific software for your region? And also, is there any issue with flashing one not from the right region? Thanks
Click to expand...
Click to collapse
Well I Googled for it. Search for your country and the desired update version. Or you could also check your previous version if you got any
Sent from my FRD-L09 using Tapatalk
mikev190 said:
I wasn't aware the UK beta had started?
Either way thanks for the info
Click to expand...
Click to collapse
It's on for a while now.
Sent from my Galaxy Tab 3 using XDA Labs
LastStandingDroid said:
You'd missed that thread I guess or its leaked [emoji14] but afaik it has started.
Click to expand...
Click to collapse
Honor UK representative started the thread officially. Not leaked.
vsriram92 said:
Honor UK representative started the thread officially. Not leaked.
Click to expand...
Click to collapse
Yeah I wasn't sure it was for instructions only
Sent from my FRD-L09 using Tapatalk
in my case no single firmware worked. im unable to go back to mm.
ultrahannoi1896 said:
in my case no single firmware worked. im unable to go back to mm.
Click to expand...
Click to collapse
What is your original firmware? You got backup?
Sent from my FRD-L09 using Tapatalk
LastStandingDroid said:
What is your original firmware? You got backup?
Sent from my FRD-L09 using Tapatalk
Click to expand...
Click to collapse
i did no backup. my original firmware is L09C432B120
DigiGoon started a thread with official firmwares in it. I don't see B120 for 432, but B131 is probably fine?
evilpaul13 said:
DigiGoon started a thread with official firmwares in it. I don't see B120 for 432, but B131 is probably fine?
Click to expand...
Click to collapse
No it isn't. I can't apply One of These firmwares. I get every time an Error if i try to Flash them over dload.
ultrahannoi1896 said:
No it isn't. I can't apply One of These firmwares. I get every time an Error if i try to Flash them over dload.
Click to expand...
Click to collapse
Try in this threath: http://forum.xda-developers.com/showthread.php?p=68888048
Maybe the link still works.
Enviado desde mi FRD-L09 mediante Tapatalk
evilpaul13 said:
DigiGoon started a thread with official firmwares in it. I don't see B120 for 432, but B131 is probably fine?
Click to expand...
Click to collapse
B131 worked here so did 120 for me
Sent from my FRD-L09 using Tapatalk
Rommco05 said:
i must make backup?
---------- Post added at 12:04 AM ---------- Previous post was at 12:02 AM ----------
Go back to the MM is easy, just have to SD with DLOAD mm and if something goes wrong is enough to install it by over DLOAD + / - / ON, OFF
Click to expand...
Click to collapse
I was more referring to that he could check build prop.
Sent from my FRD-L09 using Tapatalk
ultrahannoi1896 said:
No it isn't. I can't apply One of These firmwares. I get every time an Error if i try to Flash them over dload.
Click to expand...
Click to collapse
Did you extract the zip?
You might have another update.zip which you should remove first
Sent from my FRD-L09 using Tapatalk
can someone upload the stock recovery and recovery2 from the 7.0 beta? for the L04
LastStandingDroid said:
As we all know Huawei released the nougat beta for honor 8 (for UK and India for now) and let's be honest. It's beautiful right? But not all features work just yet (yeah I talking about you guys) Bluetooth and NFC. I'm sure Huawei has a good reason why.
So many users both bootloader locked and unlocked may want to downgrade. So here's the procedures.
Bootloader Locked.
1. Download your Marshmallow package (for your region) my is NEE (B120)
2. Extract the zip to the EXTERNALSD! Not the internal one!
3. Once done Power down the Phone and power it up while holding both Volume up and Down at the same Time. Now the downgrade Procedure should work*
*IF downgrade Procedure didn't work download another package because you most likely downloaded the wrong package.
4. Reboot into recovery and wipe DATA factory reset else it won't boot!
UNLOCKED BOOTLOADER.
Do the same procedure as locked bootloader to the step 3
4. Reboot into Fastboot and Re unlock your device. NOTE HOLD POWER DOWN AFTER YOU SELECTED YES! So it boot back to bootloader mode (fastboot)
5. Flash twrp recovery
7. Now you can either restore one of your previous backup or wipe your phone without wiping complete internal sd. I prefer restore previous backup so you won't have to setup your device again.
Hope this covers things up for all of you.
Regards
Sent from my FRD-L09 using Tapatalk
Click to expand...
Click to collapse
It didn't work for me. I tried to downgrade from the B320 version of the beta. I've downlaod the previous L04 mm version i had before getting the beta. I first tried to put the "update" zip in my sd card, it failed, then i extract the update zip on my desktop and put what i extract from the zip in my sd card and tried again. It still failed for the step 3. I would really like to be able to downgrade since the poor battery life from the beta. Any solutions?
frenchtouch92 said:
It didn't work for me. I tried to downgrade from the B320 version of the beta. I've downlaod the previous L04 mm version i had before getting the beta. I first tried to put the "update" zip in my sd card, it failed, then i extract the update zip on my desktop and put what i extract from the zip in my sd card and tried again. It still failed for the step 3. I would really like to be able to downgrade since the poor battery life from the beta. Any solutions?
Click to expand...
Click to collapse
You should pup the UPDATER.APP in a folder called dload on external sd
Sent from my FRD-L09 using Tapatalk
Related
From Huawei Romania:
http://consumer.huawei.com/ro/support/downloads/detail/index.htm?id=38741
Download
What is different compare 30?
How can I install it if I have a custom rom?
Is this not the same as this fw?
The fw in your link is only the OTA update, the link above the full 137
kpyhere said:
How can I install it if I have a custom rom?
Click to expand...
Click to collapse
first you must flash stock boot then copy dload folder to phone and use three button method or the force update; remember to backup before coz this method erases the phone.
Do you need to have an unlocked bootloader to install this update?
I am running stock B127 firmware on my MT7-L09 without root and I keep getting errors when I try and install this through Updater and the three button method
No you don't need to have an unlocked bootloader to install the B137-SP03 update. Try to make it through local update by downloading the OTA zip file (leave it as ZIP file and don't extract), create a dload folder under your External SD card and copy the zip file under that folder. Go to settings Updater and select Local update. This method doesn't do a factory reset and don't erase anything but still make backup of your important data before proceeding through the Updater..
Sent from my HUAWEI MT7-L09 using Tapatalk
tarek2010 said:
No you don't need to have an unlocked bootloader to install the B137-SP03 update. Try to make it through local update by downloading the OTA zip file (leave it as ZIP file and don't extract), create a dload folder under your External SD card and copy the zip file under that folder. Go to settings Updater and select Local update. This method doesn't do a factory reset and don't erase anything but still make backup of your important data before proceeding through the Updater..
Sent from my HUAWEI MT7-L09 using Tapatalk
Click to expand...
Click to collapse
Thanks for the reply!
I followed those steps exactly, for both the OTA update.zip and the full firmware .zip from this thread, and both times I get a "Failed" error in the local update, and the update.zip gets deleted.
Is it possible that my (Vodafone Australia) version of the Mate 7 is incompatible with these updates because of baseband version or something? I've taken a screenshot of my 'about phone' screen below:
http://imgur.com/XzNg6WP
@chongo_au I believe you are right because I didn't see before your firmware version B127-SP02 on MT7-L09. I did a search on the net and couldn't find any information about your current firmware version, except that there is a firmware with that same version (B127-SP02) for the MT7-L10 with EMUI 2.3! So I believe you have a very specific operator firmware release that is incompatible with the B137-SP03 upgrade..
Sent from my HUAWEI MT7-L09 using Tapatalk
chongo_au said:
Thanks for the reply!
I followed those steps exactly, for both the OTA update.zip and the full firmware .zip from this thread, and both times I get a "Failed" error in the local update, and the update.zip gets deleted.
Is it possible that my (Vodafone Australia) version of the Mate 7 is incompatible with these updates because of baseband version or something? I've taken a screenshot of my 'about phone' screen below:
http://imgur.com/XzNg6WP
Click to expand...
Click to collapse
I am in the same boat as you chongo.
I will be curious if you can flash other fw if you unlocked the bootloader.
After updated to 137 battery seem drain more than 130
Anyone? Special cell standby
paullu said:
After updated to 137 battery seem drain more than 130
Anyone? Special cell standby
Click to expand...
Click to collapse
my experience is in the opposite (with the same usage of course)
paullu said:
After updated to 137 battery seem drain more than 130
Anyone? Special cell standby
Click to expand...
Click to collapse
With B137SP11 Battery drains as hell. 2-4% drains per hour
I rolled back to 127 .. which is official .. batt. is ok
Simona Simmy said:
I rolled back to 127 .. which is official .. batt. is ok
Click to expand...
Click to collapse
good morning guys,anyone can told me what is the latest firmware for the mate gold MT7 - L10 ?
thank yuo
Send me the link of the b137
Email[email protected]
Thanks
Simona Simmy said:
I rolled back to 127 .. which is official .. batt. is ok
Click to expand...
Click to collapse
Hi mate, could you pls guide me to roll back to 127, thanks
Find my topic were I added all firmware with b127
Wysłane z mojego HUAWEI MT7-L09 przy użyciu Tapatalka
Hey guys, a long time ago i unlocked bootloader of my ALE-21 5.0.1, rooted it, and installed twrp. Is there any way i can update to android 6 now? My mom has the exact same with me and she got the OTA. Thanks in advance =)
What's your full build number: ALE-L21CxxxBxxx - i.e what are the x's in bold? And from which region / country?
GaT7 said:
What's your full build number: ALE-L21CxxxBxxx - i.e what are the x's in bold? And from which region / country?
Click to expand...
Click to collapse
B188, and i bought it and live in Germany
RautMike said:
B188, and i bought it and live in Germany
Click to expand...
Click to collapse
Yes you can.. You can directly go to b560 or above that build..
Sent from my ALE-L21 using XDA-Developers mobile app
---------- Post added at 13:28 ---------- Previous post was at 13:15 ----------
Download from here
http://huaweip8lite.blogspot.com/2016/03/firmwarehuawei-p8-liteale-l21-official.html?m=1
Sent from my ALE-L21 using XDA-Developers mobile app
amageek said:
Yes you can.. You can directly go to b560 or above that build..
Sent from my ALE-L21 using XDA-Developers mobile app
---------- Post added at 13:28 ---------- Previous post was at 13:15 ----------
Download from here
http://huaweip8lite.blogspot.com/2016/03/firmwarehuawei-p8-liteale-l21-official.html?m=1
Sent from my ALE-L21 using XDA-Developers mobile app
Click to expand...
Click to collapse
How do i update after downloading it?
RautMike said:
How do i update after downloading it?
Click to expand...
Click to collapse
Extract the files...
Then put the update.app file in folder named dload and copy that to your local storage..
After that, power off your device and then hold vol+, vol-and power key for atleast 10 seconds..
Then, the phone should start in installation mode..
Note: Check the update.app file size.. If its gratee than 2GB them the above process should work. If its less than you can do it by OTA...
Sent from my ALE-L21 using XDA-Developers mobile app
amageek said:
Yes you can.. You can directly go to b560 or above that build..
Click to expand...
Click to collapse
amangeek, being a rooted phone, I don't think that is a wise choice. Unroot first, & then perhaps yes.
----------------------
Anyway RautMike, if you have done as above & everything is fine - well, great.
If you haven't attempted yet, do as advised in these threads instead - similar situations, so apply the same principle:
How to upgrade Huawei P8 lite [rooted+twrp]
[P8Lite] Twrp + official update
I couldn't find the full version of C432B188 firmware to download, which is required to extract the recovery file(s) needed. So, if you cannot either, you can extract the necessary file(s) from B170 (one firmware before) - the full stock rom for B170 can be downloaded from here directly via Huawei's servers.
GaT7 said:
amangeek, being a rooted phone, I don't think that is a wise choice. Unroot first, & then perhaps yes.
----------------------
Anyway RautMike, if you have done as above & everything is fine - well, great.
If you haven't attempted yet, do as advised in these threads instead - similar situations, so apply the same principle:
How to upgrade Huawei P8 lite [rooted+twrp]
[P8Lite] Twrp + official update
I couldn't find the full version of C432B188 firmware to download, which is required to extract the recovery file(s) needed. So, if you cannot either, you can extract the necessary file(s) from B170 (one firmware before) - the full stock rom for B170 can be downloaded from here directly via Huawei's servers.
Click to expand...
Click to collapse
what are you guys talking about? i said i have twrp, dont you know i cant do that with twrp?
RautMike said:
what are you guys talking about? i said i have twrp, dont you know i cant do that with twrp?
Click to expand...
Click to collapse
Did you not read the threads I posted? Just follow them - no TWRP needs to be used in those methods.
Doing it that way you'll lose root, so after updating to Marshmallow you will need to re-root by reinstalling TWRP (for Marshmallow) & SuperSu: TUTORIAL - Huawei P8 Lite Android 6.0 Marshmallow B574 Root
GaT7 said:
Did you not read the threads I posted? Just follow them - no TWRP needs to be used in those methods.
Doing it that way you'll lose root, so after updating to Marshmallow you will need to re-root by reinstalling TWRP (for Marshmallow) & SuperSu: TUTORIAL - Huawei P8 Lite Android 6.0 Marshmallow B574 Root
Click to expand...
Click to collapse
i need to have stock recovery to install these files, and i dont, i have twrp
RautMike said:
i need to have stock recovery to install these files, and i dont, i have twrp
Click to expand...
Click to collapse
Yes, you're right - I forgot about that!
You can get it from here perhaps: Install TWRP Recovery, Backup Full System, Android Rooting and Recovery Back to Stock (works on both Android 5/6 + L21/L23 models)
If that doesn't work, a 'forced' update does apparently (could be risky though, so make a full nandroid backup with TWRP before attempting): [INTERESTING] Updating system while rooted
Also, according to the op, "When you install update by this method, you lose TWRP, root access and all what you have flashed by TWRP."
Alright, thanks, before i flash the stock recovery, how should i make an backup? I already have one of system that i made with twrp, is that enough?
Oh, anyways, all good Thank you very much, i just flashed the stock recovery with no problems, so happy lol, thanks again!
RautMike said:
Oh, anyways, all good Thank you very much, i just flashed the stock recovery with no problems, so happy lol, thanks again!
Click to expand...
Click to collapse
No problem - glad it helped . Were you able to update to Marshmallow then?
I instantly updated to marshmallow
I have a ALE-L21C55B181 (Italy brand TIM) with TWRP, root and superSU.
Can I return to stock recovery like described?
and after, how can I update to MM?
I'm not so expert, can you explane me step by step
I tried to download the stock recovery but it dosen't works (copy and past
mega:///#!6E90XIYL!pHYSFN_OJKFMSmDOOhu5yFVNmh4zhS1RribCuT-9QPI )
thank you for help.........
I have just bought a Huawei P8 Lite Dual Sim (Build number: ALE-L21C432B210) and I've been trying to update it to Android 6 using the files provided on huawei's site. The problem is that every time I try I get an error screen that says Software Install Failed and it gives me a link to huawei's site (This link in particular: emui.com/emotiondownload.php?mod=restore [sorry I cant post any links yet]) I'm getting kinda desperate since I don't know if it's my build number or what (searching for it gave no results) and every guide I've found doesn't mention my B210 device. I am stuck on Huawei's terrible skin of 5.0.1 (EMUI 3.1). Please someone help me.
thanosnic said:
I have just bought a Huawei P8 Lite Dual Sim (Build number: ALE-L21C432B210) and I've been trying to update it to Android 6 using the files provided on huawei's site. The problem is that every time I try I get an error screen that says Software Install Failed and it gives me a link to huawei's site (This link in particular: emui.com/emotiondownload.php?mod=restore [sorry I cant post any links yet]) I'm getting kinda desperate since I don't know if it's my build number or what (searching for it gave no results) and every guide I've found doesn't mention my B210 device. I am stuck on Huawei's terrible skin of 5.0.1 (EMUI 3.1). Please someone help me.
Click to expand...
Click to collapse
I have exactly the same problem. ... Hope someone can help...
I update from ALE-L21C432B204 on this way.
1. Unlock bootloader
2.Download firmware from huawai site for you country, my is croatia so i downloaded Andriod 6.0_EMUI 4.0_C432B565_Northeast Europe_Single SIM, extract and put dload folder on sd or interal phone storage
3.Download and install recovery
4.Make backup of you stock rom (I did not do it )
5.Wipe all partition except interal storage if you dont have sd card. If you have, then interal storage format to (Dalvin, cache, system, interal)
6.Reboot recovery from recovery button
7.Switch off phone
8.Press vol up + vol down + power button in same time and it should be open software updating screen
9.After install lastest mm, you can again install twrp recovery, root and other things
10. Enjoy in your emui 4.0 and mm 6.0
What build number are you trying to update to? In my case (was on B204) I did local update with B560 and OTA to B574.
JpegXguy said:
What build number are you trying to update to? In my case (was on B204) I did local update with B560 and OTA to B574.
Click to expand...
Click to collapse
My current build number is B210. After talking with Huawei in a long series of emails, they have confirmed that they dont have an update that supports my build so I'm pretty bummed about that...
thanosnic said:
My current build number is B210. After talking with Huawei in a long series of emails, they have confirmed that they dont have an update that supports my build so I'm pretty bummed about that...
Click to expand...
Click to collapse
I had B204 and no update was showing. local update to B560 worked though. Don't give up that easily
Sent from my HUAWEI ALE-L21 using XDA Labs
Is there any way I can get my phone to one of these versions?
ALE-L21C432B560
ALE-L21C432B550
ALE-L21C432B524
ALE-L21C432B204
ALE-L21C432B200
ALE-L21C432B194
ALE-L21C432B170
ALE-L21C432B010
All these support the update.
JpegXguy said:
I had B204 and no update was showing. local update to B560 worked though. Don't give up that easily
Sent from my HUAWEI ALE-L21 using XDA Labs
Click to expand...
Click to collapse
Where did you get that update? (Link pls)
Edit: If you still have the package could you check the PDF (if it had one in the first place) and tell me the versions it supports?
Sk0rpi0n89 said:
I update from ALE-L21C432B204 on this way.
1. Unlock bootloader
2.Download firmware from huawai site for you country, my is croatia so i downloaded Andriod 6.0_EMUI 4.0_C432B565_Northeast Europe_Single SIM, extract and put dload folder on sd or interal phone storage
3.Download and install recovery
4.Make backup of you stock rom (I did not do it )
5.Wipe all partition except interal storage if you dont have sd card. If you have, then interal storage format to (Dalvin, cache, system, interal)
6.Reboot recovery from recovery button
7.Switch off phone
8.Press vol up + vol down + power button in same time and it should be open software updating screen
9.After install lastest mm, you can again install twrp recovery, root and other things
10. Enjoy in your emui 4.0 and mm 6.0
Click to expand...
Click to collapse
Let me ask you, did you have the same problem as me, it gave you "Software install failed" before you did this? To me, any (compatible) upgrades I try to do, is unsuccessful.
thanosnic said:
Is there any way I can get my phone to one of these versions?
ALE-L21C432B560
ALE-L21C432B550
ALE-L21C432B524
ALE-L21C432B204
ALE-L21C432B200
ALE-L21C432B194
ALE-L21C432B170
ALE-L21C432B010
All these support the update.
Click to expand...
Click to collapse
Update to B560 worked fine for me. Get the update from here http://huaweip8lite.blogspot.gr/2016/03/firmwarehuawei-p8-liteale-l21-official.html?m=1, extract update.app and put that in the dload folder. Pretty simple
Sent from my HUAWEI ALE-L21 using XDA Labs
JpegXguy said:
Update to B560 worked fine for me. Get the update from here http://huaweip8lite.blogspot.gr/2016/03/firmwarehuawei-p8-liteale-l21-official.html?m=1, extract update.app and put that in the dload folder. Pretty simple
Sent from my HUAWEI ALE-L21 using XDA Labs
Click to expand...
Click to collapse
Please, tell me, from wich version have you updated to B560?
*I'm sorry, I see you start from B204... In my case, (i talk with local) Huawei support, tell me that, at this moment, my version not support any upgrade!!!
milt983 said:
Please, tell me, from wich version have you updated to B560?
Click to expand...
Click to collapse
Let's take this from the start: I was on B204 (Lollipop). I was instructed to go to B170 and then update to B560.
Trying to go to B170 got me a "Software install failed" message, presumably because I had a greater version. So I downloaded the file for B560, crossed my fingers and did local update through settings. It worked. I was finally on Marshmallow. After that, the phone did an OTA to B574.
I'm not responsible if anything goes wrong, but I'm fairly confident what I did should work here. Good luck
Sent from my HUAWEI ALE-L21 using XDA Labs
JpegXguy said:
Let's take this from the start: I was on B204 (Lollipop). I was instructed to go to B170 and then update to B560.
Trying to go to B170 got me a "Software install failed" message, presumably because I had a greater version. So I downloaded the file for B560, crossed my fingers and did local update through settings. It worked. I was finally on Marshmallow. After that, the phone did an OTA to B574.
I'm not responsible if anything goes wrong, but I'm fairly confident what I did should work here. Good luck
Sent from my HUAWEI ALE-L21 using XDA Labs
Click to expand...
Click to collapse
Thank you!
I see... Do you know a way to downgrade from B210 to B204?
milt983 said:
Thank you!
I see... Do you know a way to downgrade from B210 to B204?
Click to expand...
Click to collapse
I don't think that's needed. Try a Marshmallow build directly
Sent from my HUAWEI ALE-L21 using XDA Labs
JpegXguy said:
I don't think that's needed. Try a Marshmallow build directly
Sent from my HUAWEI ALE-L21 using XDA Labs
Click to expand...
Click to collapse
mmmh... I had already try B560, B564 and B574 and no one works...
JpegXguy said:
Update to B560 worked fine for me. Get the update from here http://huaweip8lite.blogspot.gr/2016/03/firmwarehuawei-p8-liteale-l21-official.html?m=1, extract update.app and put that in the dload folder. Pretty simple
Sent from my HUAWEI ALE-L21 using XDA Labs
Click to expand...
Click to collapse
Alright, just tried it, it didn't work.
milt983 said:
Let me ask you, did you have the same problem as me, it gave you "Software install failed" before you did this? To me, any (compatible) upgrades I try to do, is unsuccessful.
Click to expand...
Click to collapse
Yes i have. So after downloading may different firmwares, i understand that solution and its work.
You get error "Software install failed" because huawei say to you that they dont have an update that supports my build precisely ALE-L21C432B210.
When you wipe all through twrp and put desirous firmware in your sd card and go to installation screen through combination of key vol up and down with power key, you can install whatever version you want,
because are you working clean install through huawei update screen, not an update.
I hope I have explained a little.
I made a mistake that I installed version for single sim and not for dual sim. But it when I get some time, but regardless of that, everything works just fine, and with mm 6 a got about 4:30-5h OST
Sk0rpi0n89 said:
Yes i have. So after downloading may different firmwares, i understand that solution and its work.
You get error "Software install failed" because huawei say to you that they dont have an update that supports my build precisely ALE-L21C432B210.
When you wipe all through twrp and put desirous firmware in your sd card and go to installation screen through combination of key vol up and down with power key, you can install whatever version you want,
because are you working clean install through huawei update screen, not an update.
I hope I have explained a little.
I made a mistake that I installed version for single sim and not for dual sim. But it when I get some time, but regardless of that, everything works just fine, and with mm 6 a got about 4:30-5h OST
Click to expand...
Click to collapse
What is twrp? Could you be a little bit more specific in your guide? I would love to try your method out.
thanosnic said:
What is twrp? Could you be a little bit more specific in your guide? I would love to try your method out.
Click to expand...
Click to collapse
Good luck, you're going in deep here. Be careful.
Sent from my HUAWEI ALE-L21 using XDA Labs
JpegXguy said:
Good luck, you're going in deep here. Be careful.
Sent from my HUAWEI ALE-L21 using XDA Labs
Click to expand...
Click to collapse
Thanks, but I'm afraid this is my only option here... I really want this update...
Hi guys,
I would like to update my M3 BTV-DL09 from C100B010 to the firmware C100B302.
Now I have some questions:
- is the B302 still a beta build? If yes, does anyone know, when a final build is to be expected for Europe/Germany?
- I removed the updater app (thought I will not need it) and im rooted and Bootloader unlocked, so I cannot install the update.app container at the moment. Solution would be to flash stock Bootloader and then do it again via the secret code menu. Does anyone have the stock bootloader for B010 as flashable zip for TWRP?
I think you can extract files from update.app file, such as stock recovery...
I am on B302 and it seems to be official. At least that's what all pages with update tutorial say.
Only problem that I have is that bluetooth isn't working. I have no idea what to try.
Sent from my Nexus 6 using Tapatalk
I just ordered the 32gb version from Amazon and I am getting it Wednesday. I hope there is still development on this tablet. It looks to be a nice tablet. I don't think I will even need to Root it.
JohnK71 said:
I just ordered the 32gb version from Amazon and I am getting it Wednesday. I hope there is still development on this tablet. It looks to be a nice tablet. I don't think I will even need to Root it.
Click to expand...
Click to collapse
If you are in the US rooting it helps with 5g wifi and emui 5
Sent from my BTV-W09 using Tapatalk
deepflash said:
Hi guys,
I would like to update my M3 BTV-DL09 from C100B010 to the firmware C100B302.
Now I have some questions:
- is the B302 still a beta build? If yes, does anyone know, when a final build is to be expected for Europe/Germany?
- I removed the updater app (thought I will not need it) and im rooted and Bootloader unlocked, so I cannot install the update.app container at the moment. Solution would be to flash stock Bootloader and then do it again via the secret code menu. Does anyone have the stock bootloader for B010 as flashable zip for TWRP?
Click to expand...
Click to collapse
I updated my device to B302 just yesterday using firmware finder and OTA.
I think that for LTE version the latest build is B303 and the update is an official stable build and files are uploaded on official Huawei server.
The C100B302 it a BETA, the newer C100B303 also is a BETA.
All Huawei firmware came from OFFICIAL Huawei servers...
The "updater" app is only required to check for OTA updates. ALL the updates are then installed by the RECOVERY module that is often overwritten by TWRP.
NEVER rewrite flash partitions if you're not knowing what you are doing! Search for a tutorial on Android partitions and read it!!!
No theme app!
I just upstaged my M3 wifi model w09, to the B302 version, its bootloader is locked and not rooted.
The only problem now I have is that I can not use or change themes, bcuz the system Theme app is not available, as if it hasn't been installed!
Any solution now that I'm not rooted?
aze89 said:
I just upstaged my M3 wifi model w09, to the B302 version, its bootloader is locked and not rooted.
The only problem now I have is that I can not use or change themes, bcuz the system Theme app is not available, as if it hasn't been installed!
Any solution now that I'm not rooted?
Click to expand...
Click to collapse
Did you do the full update? Do you have the update option in settings?
Sent from my SM-G955U1 using Tapatalk
i used the firmware finder app and the dload method to upgrade to btv-w09c128b350, nougat 7.0, the first file worked perfect, the second which has all the stock apps like calculator didn't install them. i tried to install the apk from the package but got an error saying apk corrupted. can some one post the calculator apk for me please so i can get my unlock code?
crzycrkr said:
Did you do the full update? Do you have the update option in settings?
Sent from my SM-G955U1 using Tapatalk
Click to expand...
Click to collapse
Yes it was two big files that I forced updated one after another. And yes I have the "system update" in my tablet settings if that's what you mean.
I even re-installed it and tried B301 as well, but the results were the same!
tomchism said:
i used the firmware finder app and the dload method to upgrade to btv-w09c128b350, nougat 7.0, the first file worked perfect, the second which has all the stock apps like calculator didn't install them. i tried to install the apk from the package but got an error saying apk corrupted. can some one post the calculator apk for me please so i can get my unlock code?
Click to expand...
Click to collapse
Use Firmware Finder to send Firmware to Huawei Updater. It will flash both files. Dload method did not work for me either, I had same issue.
You need to be on marshmallow to do the proper update.
Sent from my BTV-DL09 using Tapatalk
how do i get back to marshmallow?
30adi said:
Use Firmware Finder to send Firmware to Huawei Updater. It will flash both files. Dload method did not work for me either, I had same issue.
You need to be on marshmallow to do the proper update.
Sent from my BTV-DL09 using Tapatalk
Click to expand...
Click to collapse
ok, so which version do i install to get back to marshmallow?
Good question...i can't find the rollback firmware for US. That is what you need first.
You can find here Marshmallow Firmwares:
https://boycracked.com/2017/05/13/official-huawei-mediapad-m3-btv-w09-stock-rom-firmware/
Probably BTV-W09C128B003 is what you need. First you need the rollback package from Nougat.
30adi said:
Good question...i can't find the rollback firmware for US. That is what you need first.
You can find here Marshmallow Firmwares:
https://boycracked.com/2017/05/13/official-huawei-mediapad-m3-btv-w09-stock-rom-firmware/
Probably BTV-W09C128B003 is what you need. First you need the rollback package from Nougat.
Click to expand...
Click to collapse
the roll back file on boy cracked is for the dl09, and i have the w09, is that safe to use?
You can find the rollback package for W09 under Notes:
30adi said:
You can find the rollback package for W09 under Notes:
Click to expand...
Click to collapse
that's the one i downloaded, and after downloading the file says it is for dl09 not w09.
http://consumer.huawei.com/de/support/tablets/mediapad_m3_8_de-sup.htm
You can find the rollback package here, for you tablet. However this is a European German page. I hope that the package is good for your device.
Sent from my ONEPLUS A5000 using Tapatalk
30adi said:
http://consumer.huawei.com/de/support/tablets/mediapad_m3_8_de-sup.htm
You can find the rollback package here, for you tablet. However this is a European German page. I hope that the package is good for your device.
Sent from my ONEPLUS A5000 using Tapatalk
Click to expand...
Click to collapse
thank you for the assistance but the only rollback on that page is again specifically listed as btv-dl09, in fact it is the same identical file listed on boycracked.
You need to choose as device BTV-W09.
Sent from my ONEPLUS A5000 using Tapatalk
rollback btv-w09 nougat to marshmallow
30adi said:
You need to choose as device BTV-W09.
Sent from my ONEPLUS A5000 using Tapatalk
Click to expand...
Click to collapse
boy do i feel stupid, i see it now, thank you.
here is a direct link for anyone else needing a rollback on w09 from nougat to marshmallow.
http://download-c1.huawei.com/download/downloadCenter?downloadId=94469&version=380487&siteCode=de
don't worry about it being the German page, the included directions are all in English.
again,
thank you!
from what I've read, the rollback sets up the system to accept emui 4.1 updates, which are blocked after moving to emui 5.0 a second flash is required with the actual firmware. this is the direct link for the recommended firmware after the rollback.
http://download-c1.huawei.com/download/downloadCenter?downloadId=94471&version=380540&siteCode=de
Hi everyone, today I will be telling you all how to get back to stock as long as your bootloader states "PHONE Unlocked" and "FRP Unlock"
You will need to install this, this is super duper important! https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
When installing, you will see the error: "E: Unknown command []]"
DO NOT BE AFRAID!
That is supposed to happen lol.
Installation procedure -
1. Flash this TWRP: https://drive.google.com/file/d/18uHjW73Th8iYKIs5m_QgwleMIOjsZd7S/view?usp=sharing
2. Wipe everything except SD card, then choose "Format data" to decrypt device
3. Reboot once again into TWRP (NOTE: If you are using USB OTG cable, make sure to plug it in AFTER TWRP is fully booted and ready to go, if you do it early, you get an error, which is weird lol. EDIT: Not sure if this error is still present in the new twrp, but it's never bad to play it safe.)
4. Flash HuRUpdater, make sure the file names are correct!
5. Reboot into stock recovery
6. Factory reset and wipe cache partition
7. Reboot
This method also enables themes to work again, so no need to worry about that!
Lots of thanks to @zxz0O0 to providing this awesome tool
And more thanks to the OpenKirin community for helping me out when flashing this! :good::good::good:
hello crayonicle, hehe im on the dot os for now, im interested going back to stock. will i get official updates backs from honor if i go back to stock using this method?
do i need to install the HuRUpdater only as the instruction shows? or follow as the link to the other thread shows?
Alvin Owen said:
hello crayonicle, hehe im on the dot os for now, im interested going back to stock. will i get official updates backs from honor if i go back to stock using this method?
Click to expand...
Click to collapse
(Used to say you can't update ota... but now you can lol)
EDIT: what the...
I flashed it using the method in the original post, of course, and I got an update notification to update system! So yes, updating works!!!! lol
crayonicle said:
Most likely not, the moment you unlock bootloader, you get no updates from that point forward. Just check using this for latest version: http://pro-teammt.ru/huawei-firmware-finder/
Click to expand...
Click to collapse
oh so i do need to follow the instructions in the other thread and download the official firmware for the 7x?
Hi !
Does it work to restore on the BND-L21C432B121 ? Because it's marked for 7X but does it works on all firmware versions of this device ?
Thanks !
hi op,
does this work on L24 the usa version?
What update.zip file did you use? can you point to the link?
Also, does this update take the recovery to stock with no TWRP?
vikra007 said:
hi op,
does this work on L24 the usa version?
What update.zip file did you use? can you point to the link?
Also, does this update take the recovery to stock with no TWRP?
Click to expand...
Click to collapse
Yes, after flashing this via twrp, if you reboot once again to recovery, it is stock recovery, not twrp.
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2649/g1699/v133897/f2/full/update.zip
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2649/g1699/v133897/f2/full/BND-L24_hw_usa/update_full_BND-L24_hw_usa.zip
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2649/g1699/v133897/f2/full/public/update_data_full_public.zip
You need to download all 3 files and rename them.
DaRkLinK_35 said:
Hi !
Does it work to restore on the BND-L21C432B121 ? Because it's marked for 7X but does it works on all firmware versions of this device ?
Thanks !
Click to expand...
Click to collapse
Yes, this works for all Honor 7x variants.
crayonicle said:
Yes, after flashing this via twrp, if you reboot once again to recovery, it is stock recovery, not twrp.
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2649/g1699/v133897/f2/full/update.zip
http://update.hicloud.com:8180/TDS/...BND-L24_hw_usa/update_full_BND-L24_hw_usa.zip
http://update.hicloud.com:8180/TDS/...97/f2/full/public/update_data_full_public.zip
You need to download all 3 files and rename them.
Yes, this works for all Honor 7x variants.
Click to expand...
Click to collapse
What do you need to rename them to? Are the instructions for that in the thread you posted for the tool?
kingd421 said:
What do you need to rename them to? Are the instructions for that in the thread you posted for the tool?
Click to expand...
Click to collapse
Yes, they are in the link for HuRUpdater, read them carefully! :good:
crayonicle said:
Yes, they are in the link for HuRUpdater, read them carefully! :good:
Click to expand...
Click to collapse
I updated using the script. Thank you.
I see the OTA update but it failed to install. Do I need to relock the bootloader?
vikra007 said:
I updated using the script. Thank you.
I see the OTA update but it failed to install. Do I need to relock the bootloader?
Click to expand...
Click to collapse
I would assume so. I sent a support ticket to honor regarding the issue (I had the same problem as you) but I went back to custom ROMs so I can't help you here sorry.
vikra007 said:
I updated using the script. Thank you.
I see the OTA update but it failed to install. Do I need to relock the bootloader?
Click to expand...
Click to collapse
Did you try running the update again? I had a similar problem after I unrooted and reinstalled the stock recovery. It failed the first time but when I rebooted and did it again it worked.
crayonicle said:
I would assume so. I sent a support ticket to honor regarding the issue (I had the same problem as you) but I went back to custom ROMs so I can't help you here sorry.
Click to expand...
Click to collapse
looks like modem update didnt update properly. I am not able to place a call. other apps seem to be fine with data. BTW, what custom rom are you using?
---------- Post added at 11:41 PM ---------- Previous post was at 11:31 PM ----------
vikra007 said:
looks like modem update didnt update properly. I am not able to place a call. other apps seem to be fine with data. BTW, what custom rom are you using?
Click to expand...
Click to collapse
Also, which twrp to use again? Getting Failed: remote: partition length get error) when I try to flash recovery through fast boot
hey
i want to rolll back but im not able to get into twrp after succesfully flashing it.
can u help me pls
BigDiqSeitz said:
hey
i want to rolll back but im not able to get into twrp after succesfully flashing it.
can u help me pls
Click to expand...
Click to collapse
So, use this twrp:
https://transfer.sh/FRHlD/Twrp_p10_lite_0.5_Pretoriano8.img
crayonicle said:
So, use this twrp:
https://transfer.sh/FRHlD/Twrp_p10_lite_0.5_Pretoriano8.img
Click to expand...
Click to collapse
worked fine for me thx ))))
Does this work for bnd-l34 mate se?
madgoogler said:
Does this work for bnd-l34 mate se?
Click to expand...
Click to collapse
It should.
Sent from my BND-L24 using Tapatalk