Database Users

Flashing error plz help me

?
I have yu5510a i can't flash stock android i see an error
Ygdp
here log
any solution
20:08:53 CELL0: V4.0.3.0
20:08:53 CELL0: Cell 0 USB address is: 2011F43C
20:09:13 CELL0: Download Started...
20:09:13 CELL0: Downloading CPB:
20:09:13 CELL0: Init DownQueue...
20:09:13 CELL0: Device connected, start to download ...
20:09:13 CELL0: Get bootloader information ...
20:09:13 CELL0: Bootloader is old !
20:09:13 CELL0: Bootloader will not use CRC while system img!
20:09:13 CELL0: Bootloader supports querying CID!
20:09:13 CELL0: Bootloader supports querying Secure !
20:09:13 CELL0: Check device ...
20:09:13 CELL0: Jump eMMC check. User setting.
20:09:13 CELL0: Check phone name fail, The phone name '8675_S10' not contained in 'cp8675_I02'
20:09:13 CELL0: Check phone name fail, Please check the 'ProductName' in the PhoneInfo.yl
20:09:13 CELL0: Check phone name fail !, msg:cp8675_S10_P2
20:09:13 CELL0: Download failed,please try again!!
20:09:13 CELL0: Total download time elapsed: 0 min : 0 sec
20:09:13 CELL0: Downloading all files: Failed!
any solution...?

Getting Error in flashing Lenovo A6000 plus with QFIL and Lenovo Downloader

Hi Guys .
I want to Flash Lenovo A6000 plus phone because it is dead and nothing is coming on screen when we power on .
I have downloaded a stock ROM file named " Lenovo_A6000_L_S054_150915_8G_ROW " and trying to flash it with QFIL software but when i click on " Download " button after connecting device to computer , it is giving error
"Validating Application Configuration
Load APP Configuration
COM:-1
SAHARA:True
SAHARA:G:\software\Lenovo a6000 plus flash file\A6000_L_S054_150915_8G_ROW\Lenovo_A6000_L_S054_150915_8G_ROW\Firmware\validated_emmc_firehose_8916.mbn
SEARCHPATH:G:\software\Lenovo a6000 plus flash file\A6000_L_S054_150915_8G_ROW\Lenovo_A6000_L_S054_150915_8G_ROW\Firmware
RAWPROGRAM:
rawprogram_unsparse.xml
PATCH:
patch0.xml
ACKRAWDATAEVERYNUMPACKETS:False
ACKRAWDATAEVERYNUMPACKETS:100
MAXPAYLOADSIZETOTARGETINBYTES:False
MAXPAYLOADSIZETOTARGETINBYTES:49152
DEVICETYPE:eMMC
PLATFORM:8x26
READBACKMODE:0
RESETAFTERDOWNLOAD:False
MAXDIGESTTABLESIZE:8192
SWITCHTOFIREHOSETIMEOUT:30
RESETTIMEOUT:200
RESETDELAYTIME:2
FLATBUILDPATH:C:\
FLATBUILDFORCEOVERRIDE:True
QCNPATH:C:\Temp\00000000.qcn
QCNAUTOBACKUPRESTORE:False
SPCCODE:000000
ENABLEMULTISIM:False
Load ARG Configuration
Process Index:0
Validating Download Configuration
Image Search Path: G:\software\Lenovo a6000 plus flash file\A6000_L_S054_150915_8G_ROW\Lenovo_A6000_L_S054_150915_8G_ROW\Firmware
RAWPROGRAM file path: G:\software\Lenovo a6000 plus flash file\A6000_L_S054_150915_8G_ROW\Lenovo_A6000_L_S054_150915_8G_ROW\Firmware\rawprogram_unsparse.xml
PATCH file path:G:\software\Lenovo a6000 plus flash file\A6000_L_S054_150915_8G_ROW\Lenovo_A6000_L_S054_150915_8G_ROW\Firmware\patch0.xml
Programmer Path:G:\software\Lenovo a6000 plus flash file\A6000_L_S054_150915_8G_ROW\Lenovo_A6000_L_S054_150915_8G_ROW\Firmware\validated_emmc_firehose_8916.mbn
Start Download
Program Path:G:\software\Lenovo a6000 plus flash file\A6000_L_S054_150915_8G_ROW\Lenovo_A6000_L_S054_150915_8G_ROW\Firmware\validated_emmc_firehose_8916.mbn
COM Port number:4
Sahara Connecting ...
Sahara Version:2
Start Sending Programmer
Sending Programmer Finished
Switch To FireHose
Wait for 3 seconds...
Max Payload Size to Target:49152 Bytes
Device Type:eMMC
Platform:8x26
Disable Ack Raw Data Every N Packets
Skip Write:False
Always Validate:True
Use Verbose:False
COM Port number:4
Sending NOP
FireHose Log: Validation is enabled.
FireHose Log: ERROR: length < sizeof(eighty_byte_header_type) || hash_position_address == NULL
FireHose Log: ERROR: Failed to authenticate Digital Signature
FireHose Log: Resetting validation state
Invalid response NAK
NOP: Fail Code: 13
Unable to send FireHose NOP, Device is not in Firehose mode !
Download Fail:FireHose Fail Failed to send Firehose NOP to the phone.
Finish Download
"
Please can anyone help me that what is the problem and why the flashing is not done and why this error coming . Is there any problem in stock Rom file or any other issue ?

Need help harbricked S8 G950U

Hello,
I really need assistance to unbrick my hard bricked SM-G950U. I need either the service rom (fastboot rom) to flash with QFIL or the SDC repair image for SD card rescue (usually created by Atf box). My phone is hardbricked, it shows "qualcomm hs-usb qdloader 9008" when plugged into pc and it is in fact unresponsive. Please help me.
Thank you.

Hi I just wanted to give this thread a bump... see if there is an official/ unofficial unbrick process for this device... I've read upon the qualcomm unbrick process.. and still have no luck.. if anybody has successfully unbridled their s8.. please pm or as how me some light at the end of this dark and lonely tunnel... Thank you.

Same
dkns1 said:
Hi I just wanted to give this thread a bump... see if there is an official/ unofficial unbrick process for this device... I've read upon the qualcomm unbrick process.. and still have no luck.. if anybody has successfully unbridled their s8.. please pm or as how me some light at the end of this dark and lonely tunnel... Thank you.
Click to expand...
Click to collapse
I'm in the same boat, but it's my wife's S8. Blackscreened while on the charger about an hour after the 8.0 OTA was applied.

dkns1 said:
Hi I just wanted to give this thread a bump... see if there is an official/ unofficial unbrick process for this device... I've read upon the qualcomm unbrick process.. and still have no luck.. if anybody has successfully unbridled their s8.. please pm or as how me some light at the end of this dark and lonely tunnel... Thank you.
Click to expand...
Click to collapse
Westen81 said:
I'm in the same boat, but it's my wife's S8. Blackscreened while on the charger about an hour after the 8.0 OTA was applied.
Click to expand...
Click to collapse
I can confirm there is a edl brick fix. Its up to the man thought if he wants to or has it for release...
@ elliwigy

TheMadScientist said:
I can confirm there is a edl brick fix. Its up to the man thought if he wants to or has it for release...
@ elliwigy
Click to expand...
Click to collapse
The files he currently has are for the S8+, he lost a lot of the stuff he had for other devices in a HDD failure. Still looking for a current FireHose programmer, RawProgram, and Patch files for MSM8998 on the Galaxy S8. If *anybody* has any hints even on where I can get a valid, current set of QFIL files for the SM-G950U, that would be great! If I can get the files and it works, I'll share the version of QPST/QFIL I'm using, etc. on here!
Edit: also, I've been using a USB 3.0 port on the front header with my attempts. My next go at it, I'm going to try one of the 2.0 ports on the back.

I will look back and speak with him. I helped test some edl and first tests where for a 955 so I may still have them myself.

Westen81 said:
The files he currently has are for the S8+, he lost a lot of the stuff he had for other devices in a HDD failure. Still looking for a current FireHose programmer, RawProgram, and Patch files for MSM8998 on the Galaxy S8. If *anybody* has any hints even on where I can get a valid, current set of QFIL files for the SM-G950U, that would be great! If I can get the files and it works, I'll share the version of QPST/QFIL I'm using, etc. on here!
Edit: also, I've been using a USB 3.0 port on the front header with my attempts. My next go at it, I'm going to try one of the 2.0 ports on the back.
Click to expand...
Click to collapse
Are you s8? I have the edl fix for s8 but I have to clear it with him first as they where for testing I have used them. My self. I may have edl recovery for 8+ but I know I got the reg s8s. Keep em put up like gold. Lol

thehaXor said:
Hello,
I really need assistance to unbrick my hard bricked SM-G950U. I need either the service rom (fastboot rom) to flash with QFIL or the SDC repair image for SD card rescue (usually created by Atf box). My phone is hardbricked, it shows "qualcomm hs-usb qdloader 9008" when plugged into pc and it is in fact unresponsive. Please help me.
Thank you.
Click to expand...
Click to collapse
dkns1 said:
Hi I just wanted to give this thread a bump... see if there is an official/ unofficial unbrick process for this device... I've read upon the qualcomm unbrick process.. and still have no luck.. if anybody has successfully unbridled their s8.. please pm or as how me some light at the end of this dark and lonely tunnel... Thank you.
Click to expand...
Click to collapse
Westen81 said:
I'm in the same boat, but it's my wife's S8. Blackscreened while on the charger about an hour after the 8.0 OTA was applied.
Click to expand...
Click to collapse
Ok guys I got the go ahead I have the edl files I can help you guys possibly these are not my work but we can make a telegram chat and we can see if we can get some life back to you guys:good::good::good:

TheMadScientist said:
Are you s8? I have the edl fix for s8 but I have to clear it with him first as they where for testing I have used them. My self. I may have edl recovery for 8+ but I know I got the reg s8s. Keep em put up like gold. Lol
Click to expand...
Click to collapse
Yes, it is a T-Mobile US Galaxy S8 (SM-G950U). I was talking to him in Hangouts the other day when I was trying with the files I do have, he was trying to EDL flash a tablet he has later that day. Thanks for the reply, man!

So here is my log from the most recent attempt:
Validating Application Configuration
Load APP Configuration
COM:-1
SAHARA:True
SAHARA:C:\Users\sacre\Downloads\G950U2\prog_ufs_firehose_8998_ddr.elf
SEARCHPATH:C:\Users\sacre\Downloads\G950U2
RAWPROGRAM:
rawprogram3.xml
PATCH:
patch3.xml
ACKRAWDATAEVERYNUMPACKETS:False
ACKRAWDATAEVERYNUMPACKETS:100
MAXPAYLOADSIZETOTARGETINBYTES:False
MAXPAYLOADSIZETOTARGETINBYTES:49152
DEVICETYPE:UFS
PLATFORM:8x26
VALIDATIONMODE:0
RESETAFTERDOWNLOAD:True
MAXDIGESTTABLESIZE:8192
SWITCHTOFIREHOSETIMEOUT:30
RESETTIMEOUT:200
RESETDELAYTIME:2
FLATBUILDPATH:C:\
FLATBUILDFORCEOVERRIDE:True
QCNPATH:C:\Temp\00000000.qcn
QCNAUTOBACKUPRESTORE:False
SPCCODE:000000
ENABLEMULTISIM:False
PROVISIONPROGRAMMERPATH:C:\Users\sacre\Downloads\G950U2\prog_ufs_firehose_8998_ddr.elf
PROVISIONXMLPATH:C:\Users\sacre\Downloads\G950U2\provision_samsung.xml
Load ARG Configuration
Validating Download Configuration
Image Search Path: C:\Users\sacre\Downloads\G950U2
RAWPROGRAM file path: C:\Users\sacre\Downloads\G950U2\rawprogram3.xml
PATCH file path:C:\Users\sacre\Downloads\G950U2\patch3.xml
Programmer Path:C:\Users\sacre\Downloads\G950U2\prog_ufs_firehose_8998_ddr.elf
Process Index:0
Image Search Path: C:\Users\sacre\Downloads\G950U2
RAWPROGRAM file path: C:\Users\sacre\Downloads\G950U2\rawprogram0.xml
PATCH file path:C:\Users\sacre\Downloads\G950U2\patch0.xml
Start Download
Program Path:C:\Users\sacre\Downloads\G950U2\prog_ufs_firehose_8998_ddr.elf
Binary build date: May 13 2015 @ 14:41:37
QSAHARASERVER CALLED LIKE THIS: 'C:\Program Files (x86)\Qualcomm\QPST\bin\QSaharaServer.exe -p \\.\COM4 -s 13:C:\Users\sacre\Downloads\G950U2\prog_ufs_firehose_8998_ddr.elf 'Current working dir: C:\Users\sacre\AppData\Roaming\Qualcomm\QFIL
Sahara mappings:
2: amss.mbn
6: apps.mbn
8: dsp1.mbn
10: dbl.mbn
11: osbl.mbn
12: dsp2.mbn
16: efs1.mbn
17: efs2.mbn
20: efs3.mbn
21: sbl1.mbn
22: sbl2.mbn
23: rpm.mbn
25: tz.mbn
28: dsp3.mbn
29: acdb.mbn
30: wdt.mbn
31: mba.mbn
13: C:\Users\sacre\Downloads\G950U2\prog_ufs_firehose_8998_ddr.elf
02:47:47: Requested ID 13, file: "C:\Users\sacre\Downloads\G950U2\prog_ufs_firehose_8998_ddr.elf"
02:47:47: 600504 bytes transferred in 0.172000 seconds (3.3296MBps)
02:47:47: File transferred successfully
02:47:47: Sahara protocol completed
Sending Programmer Finished
Switch To FireHose
Wait for 3 seconds...
Max Payload Size to Target:49152 Bytes
Device Type:UFS
Platform:8x26
Disable Ack Raw Data Every N Packets
Skip Write:False
Always Validate:False
Use Verbose:False
Binary build date: Jun 3 2015 @ 17:12:06
Build version: 15.06. 3.17.12.06
02:47:51: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
C:\Program Files (x86)\Qualcomm\QPST\bin\fh_loader.exe --port=\\.\COM4 --sendxml=rawprogram0.xml --search_path=C:\Users\sacre\Downloads\G950U2 --noprompt --showpercentagecomplete --zlpawarehost=1 --memoryname=UFS
************************************************
02:47:51: INFO: Current working dir (cwd): C:\Users\sacre\AppData\Roaming\Qualcomm\QFIL\
02:47:51: INFO: Showing network mappings to allow debugging
02:47:51: INFO:
02:47:51: INFO: Trying to store 'rawprogram0.xml' in string table
02:47:51: INFO: Looking for file 'rawprogram0.xml'
02:47:51: INFO: User wants to talk to port '\\.\COM4'
02:47:51: INFO: Took 0.00000000 seconds to open port
02:47:51: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others, <patch>,<power>
02:47:51: INFO: If you don't want this, use --dontsorttags
02:47:51: INFO: Looking for file 'gpt_main0.bin'
02:47:51: INFO: Looking for file 'gpt_backup0.bin'
02:47:51: INFO:
Total to be tansferd with <program> or <read> is 44.00 KB
02:47:51: INFO: Sending <configure>
02:47:51: INFO: TARGET SAID: 'Binary build date: Jan 2 2018 @ 13:14:45'
02:47:51: INFO: TARGET SAID: 'Chip serial num: 4294967295 (0xffffffff)'
02:47:51: INFO: TARGET SAID: 'Supported Functions: program configure nop firmwarewrite patch setbootablestoragedrive ufs emmc power benchmark read getstorageinfo getsha256digest erase peek poke '
02:47:51: INFO: TARGET SAID: 'Calling usb_al_bulk_set_zlp_mode(TRUE) since ZlpAwareHost='1''
02:47:51: INFO: fh.attrs.MaxPayloadSizeToTargetInBytes = 1048576
02:47:51: INFO: fh.attrs.MaxPayloadSizeToTargetInBytesSupported = 1048576
02:47:51: INFO: In handleProgram('gpt_main0.bin')
02:47:51: INFO: Looking for file 'gpt_main0.bin'
02:47:51: INFO: =======================================================
02:47:51: INFO: {<program> FILE: 'C:\Users\sacre\Downloads\G950U2\gpt_main0.bin'}
02:47:51: INFO: {<program> (24.00 KB) 6 sectors needed at location 0 on LUN 0}
02:47:51: INFO: =======================================================
02:47:51: INFO: TARGET SAID: 'ERROR: Failed to initialize (open whole lun) UFS Device slot 0 partition 0'
02:47:51: INFO: TARGET SAID: 'ERROR: ufs_open_error_code 0 :: 0x114'
02:47:51: INFO: TARGET SAID: 'ERROR: last ufs_open_error_code 16 :: 0x114'
02:47:51: INFO: TARGET SAID: 'ERROR: Failed to open the device 3 slot 0 partition 0'
02:47:51: INFO: TARGET SAID: 'INFO: Device type 3, slot 0, partition 0, error 0'
02:47:51: INFO: TARGET SAID: 'WARN: Get Info failed to open 3 slot 0, partition 0, error 0'
02:47:51: INFO: TARGET SAID: 'storage_device_get_num_partition_sectors FAILED!'
02:47:51: INFO: TARGET SAID: 'parseSectorValue could not handle start_sector value'
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
02:47:51: {ERROR: program FAILED - Please see log}
Writing log to 'C:\Users\sacre\AppData\Roaming\Qualcomm\QFIL\port_trace.txt', might take a minute
Log is 'C:\Users\sacre\AppData\Roaming\Qualcomm\QFIL\port_trace.txt'
Download Fail:FireHose Fail FHLoader Failrocess fail
Finish Download
Com4 is the port in use, but there's a weird com port callout at the very beginning there. Also noticed it changed the RawProgram and Patch from 3 to 0. Damn software. Damn phone.

Westen81 said:
So here is my log from the most recent attempt:
Validating Application Configuration
Load APP Configuration
COM:-1
SAHARA:True
SAHARA:C:\Users\sacre\Downloads\G950U2\prog_ufs_firehose_8998_ddr.elf
SEARCHPATH:C:\Users\sacre\Downloads\G950U2
RAWPROGRAM:
rawprogram3.xml
PATCH:
patch3.xml
ACKRAWDATAEVERYNUMPACKETS:False
ACKRAWDATAEVERYNUMPACKETS:100
MAXPAYLOADSIZETOTARGETINBYTES:False
MAXPAYLOADSIZETOTARGETINBYTES:49152
DEVICETYPE:UFS
PLATFORM:8x26
VALIDATIONMODE:0
RESETAFTERDOWNLOAD:True
MAXDIGESTTABLESIZE:8192
SWITCHTOFIREHOSETIMEOUT:30
RESETTIMEOUT:200
RESETDELAYTIME:2
FLATBUILDPATH:C:\
FLATBUILDFORCEOVERRIDE:True
QCNPATH:C:\Temp\00000000.qcn
QCNAUTOBACKUPRESTORE:False
SPCCODE:000000
ENABLEMULTISIM:False
PROVISIONPROGRAMMERPATH:C:\Users\sacre\Downloads\G950U2\prog_ufs_firehose_8998_ddr.elf
PROVISIONXMLPATH:C:\Users\sacre\Downloads\G950U2\provision_samsung.xml
Load ARG Configuration
Validating Download Configuration
Image Search Path: C:\Users\sacre\Downloads\G950U2
RAWPROGRAM file path: C:\Users\sacre\Downloads\G950U2\rawprogram3.xml
PATCH file path:C:\Users\sacre\Downloads\G950U2\patch3.xml
Programmer Path:C:\Users\sacre\Downloads\G950U2\prog_ufs_firehose_8998_ddr.elf
Process Index:0
Image Search Path: C:\Users\sacre\Downloads\G950U2
RAWPROGRAM file path: C:\Users\sacre\Downloads\G950U2\rawprogram0.xml
PATCH file path:C:\Users\sacre\Downloads\G950U2\patch0.xml
Start Download
Program Path:C:\Users\sacre\Downloads\G950U2\prog_ufs_firehose_8998_ddr.elf
Binary build date: May 13 2015 @ 14:41:37
QSAHARASERVER CALLED LIKE THIS: 'C:\Program Files (x86)\Qualcomm\QPST\bin\QSaharaServer.exe -p \\.\COM4 -s 13:C:\Users\sacre\Downloads\G950U2\prog_ufs_firehose_8998_ddr.elf 'Current working dir: C:\Users\sacre\AppData\Roaming\Qualcomm\QFIL
Sahara mappings:
2: amss.mbn
6: apps.mbn
8: dsp1.mbn
10: dbl.mbn
11: osbl.mbn
12: dsp2.mbn
16: efs1.mbn
17: efs2.mbn
20: efs3.mbn
21: sbl1.mbn
22: sbl2.mbn
23: rpm.mbn
25: tz.mbn
28: dsp3.mbn
29: acdb.mbn
30: wdt.mbn
31: mba.mbn
13: C:\Users\sacre\Downloads\G950U2\prog_ufs_firehose_8998_ddr.elf
02:47:47: Requested ID 13, file: "C:\Users\sacre\Downloads\G950U2\prog_ufs_firehose_8998_ddr.elf"
02:47:47: 600504 bytes transferred in 0.172000 seconds (3.3296MBps)
02:47:47: File transferred successfully
02:47:47: Sahara protocol completed
Sending Programmer Finished
Switch To FireHose
Wait for 3 seconds...
Max Payload Size to Target:49152 Bytes
Device Type:UFS
Platform:8x26
Disable Ack Raw Data Every N Packets
Skip Write:False
Always Validate:False
Use Verbose:False
Binary build date: Jun 3 2015 @ 17:12:06
Build version: 15.06. 3.17.12.06
02:47:51: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
C:\Program Files (x86)\Qualcomm\QPST\bin\fh_loader.exe --port=\\.\COM4 --sendxml=rawprogram0.xml --search_path=C:\Users\sacre\Downloads\G950U2 --noprompt --showpercentagecomplete --zlpawarehost=1 --memoryname=UFS
************************************************
02:47:51: INFO: Current working dir (cwd): C:\Users\sacre\AppData\Roaming\Qualcomm\QFIL\
02:47:51: INFO: Showing network mappings to allow debugging
02:47:51: INFO:
02:47:51: INFO: Trying to store 'rawprogram0.xml' in string table
02:47:51: INFO: Looking for file 'rawprogram0.xml'
02:47:51: INFO: User wants to talk to port '\\.\COM4'
02:47:51: INFO: Took 0.00000000 seconds to open port
02:47:51: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others, <patch>,<power>
02:47:51: INFO: If you don't want this, use --dontsorttags
02:47:51: INFO: Looking for file 'gpt_main0.bin'
02:47:51: INFO: Looking for file 'gpt_backup0.bin'
02:47:51: INFO:
Total to be tansferd with <program> or <read> is 44.00 KB
02:47:51: INFO: Sending <configure>
02:47:51: INFO: TARGET SAID: 'Binary build date: Jan 2 2018 @ 13:14:45'
02:47:51: INFO: TARGET SAID: 'Chip serial num: 4294967295 (0xffffffff)'
02:47:51: INFO: TARGET SAID: 'Supported Functions: program configure nop firmwarewrite patch setbootablestoragedrive ufs emmc power benchmark read getstorageinfo getsha256digest erase peek poke '
02:47:51: INFO: TARGET SAID: 'Calling usb_al_bulk_set_zlp_mode(TRUE) since ZlpAwareHost='1''
02:47:51: INFO: fh.attrs.MaxPayloadSizeToTargetInBytes = 1048576
02:47:51: INFO: fh.attrs.MaxPayloadSizeToTargetInBytesSupported = 1048576
02:47:51: INFO: In handleProgram('gpt_main0.bin')
02:47:51: INFO: Looking for file 'gpt_main0.bin'
02:47:51: INFO: =======================================================
02:47:51: INFO: {<program> FILE: 'C:\Users\sacre\Downloads\G950U2\gpt_main0.bin'}
02:47:51: INFO: {<program> (24.00 KB) 6 sectors needed at location 0 on LUN 0}
02:47:51: INFO: =======================================================
02:47:51: INFO: TARGET SAID: 'ERROR: Failed to initialize (open whole lun) UFS Device slot 0 partition 0'
02:47:51: INFO: TARGET SAID: 'ERROR: ufs_open_error_code 0 :: 0x114'
02:47:51: INFO: TARGET SAID: 'ERROR: last ufs_open_error_code 16 :: 0x114'
02:47:51: INFO: TARGET SAID: 'ERROR: Failed to open the device 3 slot 0 partition 0'
02:47:51: INFO: TARGET SAID: 'INFO: Device type 3, slot 0, partition 0, error 0'
02:47:51: INFO: TARGET SAID: 'WARN: Get Info failed to open 3 slot 0, partition 0, error 0'
02:47:51: INFO: TARGET SAID: 'storage_device_get_num_partition_sectors FAILED!'
02:47:51: INFO: TARGET SAID: 'parseSectorValue could not handle start_sector value'
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
02:47:51: {ERROR: program FAILED - Please see log}
Writing log to 'C:\Users\sacre\AppData\Roaming\Qualcomm\QFIL\port_trace.txt', might take a minute
Log is 'C:\Users\sacre\AppData\Roaming\Qualcomm\QFIL\port_trace.txt'
Download Fail:FireHose Fail FHLoader Failrocess fail
Finish Download
Com4 is the port in use, but there's a weird com port callout at the very beginning there. Also noticed it changed the RawProgram and Patch from 3 to 0. Damn software. Damn phone.
Click to expand...
Click to collapse
Yea that's a lot different than what mine did. You are making it a lot farther. In qfil.
Like it's conflicting with it self. Hmmmmm. I show shoot. Few PM's this afternoon and see if any one can shed light on this one

TheMadScientist said:
Yea that's a lot different than what mine did. You are making it a lot farther. In qfil.
Like it's conflicting with it self. Hmmmmm. I show shoot. Few PM's this afternoon and see if any one can shed light on this one
Click to expand...
Click to collapse
W3RD. I even tweaked the port configuration settings in Windows for the 9008, as far as stop bits. left flow control off, set baud at 14.4 . If nobody has an epiphany between now and when I get off work, I'm gonna call it and tell the wife we're going to T-Mobile.

TheMadScientist said:
Ok guys I got the go ahead I have the edl files I can help you guys possibly these are not my work but we can make a telegram chat and we can see if we can get some life back to you guys:good::good::good:
Click to expand...
Click to collapse
Did you end up getting this figured out? I have 2 s8 G950u that have black screens after attempting to unlock with octoplus pro box. Any help would be appreciated.

amourer2 said:
Did you end up getting this figured out? I have 2 s8 G950u that have black screens after attempting to unlock with octoplus pro box. Any help would be appreciated.
Click to expand...
Click to collapse
hollar at me on hangouts and I can live chat you
https://hangouts.google.com/group/JyLSy4hFLPwGYx9g1
I will be on for the next few hours but you can hollar anytime ill respond back once i see it

I would love to get ahold of this S8 EDL fix if someone can part with the files. If you want them private I will keep them private. Trying to help someone with their bricked S8. Not my first EDL 9008 recovery but will be my first S8 so I can definitely use the practice. I could trade a carrier unlock or frp unlock job for the files if they are all intact and are for sure working. I have a few boxes I use for my phone repair work too.

Hi pros
I'm in kind of a similar situation....I think I flashed MY 950U PIE with wrong BL
This phone is dead....Doesn't boot...no download mode....No recovery mode....
When connected to pc....device manager Recognises device as QUALCOMM HS USB 9008
Any way to brig it back to life...?
Im a newbie in flashing if anybody has a solution.....step by step process will be hoghly appropriated

Yu yureka is not starting after flashing it with stock rom

15:01:17 CELL1: Software Version: Assembly - <V3.98_141222_02>
15:01:17 CELL1: Cell 1 USB address is: 5&26769595&0&8
15:04:30 CELL1: Download Started...
15:04:30 CELL1: Downloading CPB:
15:04:30 CELL1: Init DownQueue...
15:04:30 CELL1: 4.4.035.00.P1.150420.8675_I01_ROM
15:04:30 CELL1: Device connected, start to download ...
15:04:30 CELL1: Get bootloader information ...
15:04:30 CELL1: Bootloader is old !
15:04:30 CELL1: Bootloader will not use CRC while system img!
15:04:30 CELL1: Bootloader supports querying CID!
15:04:30 CELL1: Bootloader supports querying Secure !
15:04:30 CELL1: Check device ...
15:04:30 CELL1: Check CID Pass.
15:04:30 CELL1: Check phone pass !
15:04:30 CELL1: This CPB Support Secure Phone!
15:04:30 CELL1: Check phone fuse hwid, pass!
15:04:30 CELL1: Phone fix pass !
15:04:30 CELL1: Switched device to upgrade mode ...
15:04:30 CELL1: Start to download CPB ...
15:04:30 CELL1: C:\Users\KAPIL\Desktop\Yureka Original\Yu_Yureka_AO5510_V2_15.04.15_lollipop\Firmware\4.4.035.00.P1.150420.8675_I01_ROM.CPB
15:04:30 CELL1: Start to download sbl1.mbn file ...
15:04:30 CELL1: transmit sbl1.mbn file size info OK
15:04:30 CELL1: Transmit sbl1.mbn file Flag code OK
15:04:30 CELL1: Start to download sbl1.mbn file ...
15:04:30 CELL1: transmit sbl1.mbn file size info OK
15:04:30 CELL1: Transmit sbl1.mbn file Flag code OK
15:04:30 CELL1: Start to download tz.mbn file ...
15:04:30 CELL1: transmit tz.mbn file size info OK
15:04:30 CELL1: Transmit tz.mbn file Flag code OK
15:04:30 CELL1: Start to download tz.mbn file ...
15:04:30 CELL1: transmit tz.mbn file size info OK
15:04:31 CELL1: Transmit tz.mbn file Flag code OK
15:04:31 CELL1: Start to download rpm.mbn file ...
15:04:31 CELL1: transmit rpm.mbn file size info OK
15:04:31 CELL1: Transmit rpm.mbn file Flag code OK
15:04:31 CELL1: Start to download rpm.mbn file ...
15:04:31 CELL1: transmit rpm.mbn file size info OK
15:04:31 CELL1: Transmit rpm.mbn file Flag code OK
15:04:31 CELL1: Start to download hyp.mbn file ...
15:04:31 CELL1: transmit hyp.mbn file size info OK
15:04:31 CELL1: Transmit hyp.mbn file Flag code OK
15:04:31 CELL1: Start to download hyp.mbn file ...
15:04:31 CELL1: transmit hyp.mbn file size info OK
15:04:31 CELL1: Transmit hyp.mbn file Flag code OK
15:04:31 CELL1: Start to download emmc_appsboot.mbn file ...
15:04:31 CELL1: transmit emmc_appsboot.mbn file size info OK
15:04:39 CELL1: Transmit emmc_appsboot.mbn file Flag code OK
15:04:39 CELL1: Start to download emmc_appsboot.mbn file ...
15:04:39 CELL1: transmit emmc_appsboot.mbn file size info OK
15:04:45 CELL1: Transmit emmc_appsboot.mbn file Flag code OK
15:04:45 CELL1: Start to download boot.img file ...
15:04:45 CELL1: transmit boot.img file size info OK
15:04:52 CELL1: Transmit boot.img file Flag code OK
15:04:52 CELL1: Start to download recovery.img file ...
15:04:52 CELL1: transmit recovery.img file size info OK
15:05:00 CELL1: Transmit recovery.img file Flag code OK
15:05:00 CELL1: Success to transmit recovery.img,Next...
15:05:00 CELL1: Start to download cache.img file ...
15:05:00 CELL1: transmit cache.img file size info OK
15:05:03 CELL1: Transmit cache.img file Flag code OK
15:05:03 CELL1: Start to download MISC.img file ...
15:05:03 CELL1: transmit MISC.img file size info OK
15:05:03 CELL1: Transmit MISC.img file Flag code OK
15:05:03 CELL1: Start to download DDR.bin file ...
15:05:03 CELL1: transmit DDR.bin file size info OK
15:05:03 CELL1: Transmit DDR.bin file Flag code OK
15:05:03 CELL1: Start to download NON-HLOS.bin file ...
15:05:03 CELL1: transmit NON-HLOS.bin file size info OK
15:05:22 CELL1: Transmit NON-HLOS.bin file Flag code OK
15:05:22 CELL1: Start to download system.img file ...
15:05:22 CELL1: Downloading the 1 packet of system
15:06:05 CELL1: Downloading the 2 packet of system
15:06:42 CELL1: Downloading the 3 packet of system
15:07:10 CELL1: Downloading the 4 packet of system
15:08:05 CELL1: Downloading the 5 packet of system
15:08:53 CELL1: Downloading the 6 packet of system
15:09:11 CELL1: transmit system file data finished,Next...
15:09:11 CELL1: Start to download userdata.img file ...
15:09:11 CELL1: transmit userdata.img file size info OK
15:10:25 CELL1: Transmit userdata.img file Flag code OK
15:10:25 CELL1: Start to download sec.dat file ...
15:10:25 CELL1: transmit sec.dat file size info OK
15:10:25 CELL1: Transmit sec.dat file Flag code OK
15:10:25 CELL1: Quite upgrade mode ...
15:10:30 CELL1: Not found RS232 port.
15:10:30 CELL1: Upgraded. Please remove device manually.
15:10:30 CELL1: Total download time elapsed: 6 min : 0 sec
15:10:30 CELL1: Downloading all files: Successful!
But still the device is not starting..Help Please...

H-Bricked Nokia 6.1 plus TA-1083, Bootloader Locked. Trying options QPST/QFIL

Hello team XDA,
I have Hard bricked Nokia 6.1 plus, It is connecting in Qualcomm 9008 Mode to my PC. I used the two test point Short method to make it. I think its also knwon as EDL mode.
Incidence: I was using "Scrcpy" tool for using my mobile on PC. It got freezed,turned off and not starting now.
What I have tried : I have tried OST LA 6.2.8 (the cracked one)in Emergency download Mode which did not work since bootloader is locked.
Error was: Sahara download failed.
Unfortunately Nokia service centers are closed. I heard they can download using their Secure credentials.
I tried Power+VOL Up button --- Did not work.
I tried Power + vol up+ vol dn --- Did not work.
What help i need: I saw tutorials on using QFIL/QPST to unbrick devices but they need certain XML and HEX files. I am unable to find them for my mobile, my knowledge is limited in this. Can anyone suggest where I can get those files.
Imp Questions :
1. Can QFIL / QPST unbrick my device since it is has locked bootloader?
2. If not is there any other tool/way to unbrick the device?
3. I am suspecting eMMC failure, Any ways to check it?
I know I wrote a lot, but want to make things very clear (as per my ability) for anyone willing to help. Kindly suggest I will try it immediately. Phone not in warranty, I dont mind about warranty and all.
Thanks in advance
Have a great day

just enter edl mode , update driver. Ost 6.0.4 software use... flash oreo firmware which before july security patch... flash with emergency mode
Sent from my TA-1054 using Tapatalk
---------- Post added at 04:23 PM ---------- Previous post was at 04:18 PM ----------
download this firmware https://drive.google.com/file/d/1iO1-54ZW986AZkmLva8DelPz_YS2pNTP/view?usp=drivesdk if still failed, send me logdata
Sent from my TA-1054 using Tapatalk

Thank you, I am trying this right away, and will update you.
Have a great day ahead.!
Regards.
EDIT:
1. as Mentioned my boot loader is locked.
2. OST 6.0.4 does not support OREO.
Not tried yet but just re-clarifying.

when u flash through edl mode its doesnt care about ur device lock or unlock ... and one things, i flashed several device like that...and 6.0.4 support oreo very well... so try it
Sent from my TA-1054 using Tapatalk

Sure, I am doing it now, will take some time to download firmware, once finished , I will update you.
Regards.

https://drive.google.com/file/d/1n91aYT9Di6_v4F3Wjlv8TjfeLc64AcYA/view?usp=drivesdk
ost 6.0.4
Sent from my TA-1054 using Tapatalk

Hi,
I downloaded the OST 6.0.4 from the drive link, installed and selected the
file " DRG-237B-0-00WW-B05.mlf" fromthe 7zip file downloaded from your link
It immediately gave the error:
"The update process failed"
Error: The Software version of the updater is out of date. please upgrade the updater and then try again.
I saw one forum to change some hex. Should i go for it? or go for OST 6.1.2? Please help.

TeamViewer id pass?
Sent from my TA-1054 using Tapatalk
---------- Post added at 10:33 AM ---------- Previous post was at 10:29 AM ----------
https://drive.google.com/file/d/1-P_L6f92HznkyKIF819a_m__dkKsNa6V/view?usp=drivesdk
download this
Sent from my TA-1054 using Tapatalk

No good network coverage here, If possible i will arrange in next few days.
Also this is what I did.
OST 6.1.2 : ERROR: FUNCTION :MAIN: 303 Uploading Image using Sahara protocol failed.
OST 6.2.8 (Given by you) : ERROR: FUNCTION :MAIN: 303 Uploading Image using Sahara protocol failed.
Code: 0xc3be
QPST:
2020-06-21 21:36:17.532 QSAHARASERVER CALLED LIKE THIS: 'C:\Program Files (x86)\Qualcomm\QPST\bin\QSaharaServer.ex'Current working dir: C:\Users\Home\AppData\Roaming\Qualcomm\QFIL\COMPORT_3
2020-06-21 21:36:17.532 Sahara mappings:
2020-06-21 21:36:17.532 2: amss.mbn
2020-06-21 21:36:17.532 6: apps.mbn
2020-06-21 21:36:17.532 8: dsp1.mbn
2020-06-21 21:36:17.532 10: dbl.mbn
2020-06-21 21:36:17.532 11: osbl.mbn
2020-06-21 21:36:17.532 12: dsp2.mbn
2020-06-21 21:36:17.532 16: efs1.mbn
2020-06-21 21:36:17.532 17: efs2.mbn
2020-06-21 21:36:17.532 20: efs3.mbn
2020-06-21 21:36:17.532 21: sbl1.mbn
2020-06-21 21:36:17.532 22: sbl2.mbn
2020-06-21 21:36:17.532 23: rpm.mbn
2020-06-21 21:36:17.532 25: tz.mbn
2020-06-21 21:36:17.532 28: dsp3.mbn
2020-06-21 21:36:17.532 29: acdb.mbn
2020-06-21 21:36:17.532 30: wdt.mbn
2020-06-21 21:36:17.547 31: mba.mbn
2020-06-21 21:36:17.547 13: C:\Program Files (x86)\Qualcomm\QPST\bin\DRG-237B-0-00WW-B05.full\B2N-0-237B-prog_emmc_ufs_firehose_Sdm660_ddr.elf
2020-06-21 21:36:17.547
2020-06-21 21:36:17.547 21:36:17: ERROR: function: sahara_rx_data:277 Unable to read packet header. Only read 0 bytes.
2020-06-21 21:36:17.547
2020-06-21 21:36:17.547 21:36:17: ERROR: function: sahara_main:983 Sahara protocol error
2020-06-21 21:36:17.547
2020-06-21 21:36:17.547 21:36:17: ERROR: function: main:320 Uploading Image using Sahara protocol failed
2020-06-21 21:36:17.547
2020-06-21 21:36:17.547
2020-06-21 21:36:17.547 Download Fail:Sahara Fail:QSaharaServer Failrocess fail
2020-06-21 21:36:17.547 Finish Download
Re-confirming: My (NOKIA 6.1 plus) TA-1083 is connected as " Qualcomm HS-USB QDLoader 9008
"

UPDATE:
I did the process multiple times now have new results:
OST 6.1.2 and 6.2.8
Error : TARGET SAID: 'WARN: Get Info failed to open 1 slot 0,
QFIL:
2020-06-21 22:43:08.954 22:42:49: INFO: TARGET SAID: 'Calling usb_al_bulk_set_zlp_mode(TRUE) since ZlpAwareHost='1''
2020-06-21 22:43:08.954 22:42:49: INFO: fh.attrs.MaxPayloadSizeToTargetInBytes = 1048576
2020-06-21 22:43:08.954 22:42:49: INFO: fh.attrs.MaxPayloadSizeToTargetInBytesSupported = 1048576
2020-06-21 22:43:08.954 22:42:49: INFO: In handleProgram('B2N-0-237B-xbl.elf')
2020-06-21 22:43:08.954 22:42:49: INFO: Looking for file 'B2N-0-237B-xbl.elf'
2020-06-21 22:43:08.954 22:42:49: INFO: =======================================================
2020-06-21 22:43:08.954 22:42:49: INFO: {<program> FILE: 'C:\Program Files (x86)\Qualcomm\QPST\bin\DRG-237B-0-00WW-B05.full\B2N-0-237B-xbl.elf'}
2020-06-21 22:43:08.954 22:42:49: INFO: {<program> (2.44 MB) 5007 sectors needed at location 585728 on LUN 0}
2020-06-21 22:43:08.954 22:42:49: INFO: =======================================================
2020-06-21 22:43:08.954
2020-06-21 22:43:08.954
2020-06-21 22:43:08.970 22:43:08: INFO: TARGET SAID: 'ERROR: Failed to open the SDCC Device slot 0 partition 0'
2020-06-21 22:43:08.970
2020-06-21 22:43:08.970 22:43:08: INFO: TARGET SAID: 'ERROR: Failed to open the device 1 slot 0 partition 0'
2020-06-21 22:43:08.970
2020-06-21 22:43:08.970 22:43:08: INFO: TARGET SAID: 'INFO: Device type 1, slot 0, partition 0, error 0'
2020-06-21 22:43:08.970
2020-06-21 22:43:08.970 22:43:08: INFO: TARGET SAID: 'WARN: Get Info failed to open 1 slot 0, partition 0, error 0'
2020-06-21 22:43:08.970
2020-06-21 22:43:08.970 22:43:08: INFO: TARGET SAID: 'storage_device_get_num_partition_sectors FAILED!'
2020-06-21 22:43:08.970
2020-06-21 22:43:08.970 22:43:08: INFO: TARGET SAID: 'parseSectorValue could not handle start_sector value'

i also got sahara protocol error... ur device can be fix... dont panic ... if i can try, it will be nice
Sent from my TA-1054 using Tapatalk

sure, Check the mail through, which u shared OST 6.2.8.
Regards,

try now
Sent from my TA-1054 using Tapatalk

I did what was possible for me, I will share team viewer id and pass on your mail morning - IST

Yanky_NOOB said:
I did what was possible for me, I will share team viewer id and pass on your mail morning - IST
Click to expand...
Click to collapse
@Yanky_NOOB : I tried same steps as whatever you did and face exact same issues.
Guys I have the same problem too, Please share the details with me too so that I can try the same with my device too.
my post:
https://forum.xda-developers.com/no...s-edl-mode-emmc-failure-t4114507#post82899739

@mananarang
Have you confirmed that it is eMMC failure for you? if so how? i will also want to verify.
If so then then there is no point in trying to flash the rom's ? Am i correct as per my knowledge the ROM (android OS) goes to the eMMC portion.
If eMMC ha not failed then:
1. I know that flashing in EDL mode requires a signed ROM from Nokia, A non signed ROM will be rejected by edl since it checks for a Signing key, This can be done by NOKIA CARE as they have OST (USER & PASS)with Authorization to their servers who provide them signed ROM for flashing. Please correct me if any part of this is incorrect or you have some another idea to share.
Are the ROM's available in open domain Signed?
External boot seems to be an option as i saw on your thread but how? i am researching on it.
till then you can read this: https://alephsecurity.com/2018/01/22/qualcomm-edl-1/
Regards,

I'm wondering how did Scrcpy caused the hard-bricked.

heat the emmc little bit than try again
Sent from my TA-1054 using Tapatalk

Yeah @Volski_ i was using scrcpy for a month or so. And suddenly one morning as i was using my phone via scrcpy it freezed. Even hardware buttons, i disconnected the Mobile by the time it was off on its own, after that i tried turning it on..it was not so after connecting to pc i got the 9008 mode.
Surprising but sadly true...

Yeah @Volski_ i was using scrcpy for a month or so. And suddenly one morning as i was using my phone via scrcpy it freezed. Even hardware buttons, i disconnected the Mobile by the time it was off on its own, after that i tried turning it on..it was not so after connecting to pc i got the 9008 mode.
Surprising but sadly true...