OEM locked and stuck in Android safe mode "Decryption unsuccessful" - ZTE Axon 7 Questions & Answers

I recently successfully restored my Axon 7 (A2017U) to B20 and tried to OEM lock it again. After running "fastboot oem lock", the phone rebooted, but came up with something that said "To start Android, enter your password." I didn't have a password before, so I tried something I found online called default_password to see if it would unlock (which it didn't) & then other passwords to get the phone to wipe itself and essentially perform a factory reset. However, now it is stuck in Safe Mode and says "Decryption unsuccessful: The password you entered is correct but unfortunately your data is corrupt." When I try to wipe the phone, it says it is factory resetting, but then it restarts and goes to a blank screen. (Which I suspect is because TWRP is still installed as a recovery, not stock). In addition, power+volume up no longer works since the phone is oem locked, but power+volume down takes the phone into Factory Test Mode. My computer still recognizes the phone when it shows up in Safe Mode, but I cannot see it in ADB.
Where can I go from here to factory reset the phone? Is it possible to send this to ZTE to fix since it is OEM locked at the moment?

I followed razorblader's advice and successfully got the phone into EDL mode and ran tenfar's tool. However, that made it worse and now the phone just shows ZTE for the second & the screen goes blank.
EDIT: Nevermind, I was running that program without recovery.img/boot.img in the same directory, D'OH! Luckily, I still had comms with the phone after that mistake & I re-ran the program successfully. I can now get into TWRP recovery. However, booting into system still shows the corrupt data message. I'm going to try a factory reset from TWRP and see if that fixes the issue.

OK good news, got my Axon 7 working again, stock + locked & am currently posting this from it. One reason I wanted to relock it however was to get OTAs and right now B27 is showing up. Now before I almost brick my axon again, do I need to flash stock B20 recovery before I'm able to install this update? Also, I'd like to get to B29 eventually, but I'm guessing I need to update to B27 first. (correct me if I'm wrong though)

Related

HELP - Nexus 4 Won't Boot + Other Issues

Hi All,
I tried to complete a manual update of the 4.3 OTA on my Nexus 4 this evening, however unfortunately it didn't work and my phone would not boot past the 'Google' screen. After wiping the cache, and still having the issue, I decided to do a factory data wipe/restore. However the problem still persisted.
With this, I thought the only way past this was to install the factory image. I installed the 4.3 factory image just fine (after going through the various steps, including unlocking the bootloader) and it was up and running for a while installing apps. However, with this, the device had a black/blank screen for a fair few minutes and after leaving it I thought I might has well reboot. Unfortunately, this time is did not boot again.
So; off to do the same previous steps again.... fastboot oem unlock (as I relocked the device previously), load bootloader, etc, etc. Got to the system update, and it passed an error saying that fastboot is not available on a locked device. Strange as I had unlocked it, but there is was on the menu "LOCK STATE - locked"....
I am now at the stage where I can't actually keep my phone unlocked. I can complete the command fastboot oem unlock, but once I complete fastboot reboot-bootloader, the device is stating it is locked again. - This is where I need some help, PLEASE.
Sorry for the long post, but wanted to describe the situation. If you need further info from me, just let me know. I'm hoping someone far wiser than I am can help me resolve this issue...
Any help on this? - It would be much appreciated.
I too have the same problem with my phone
but my phone is 4.2.2. rooted and wouldn't load past the 'google' boot screen
I can still go into clockwork recovery mode and I wiped cache, did factory reset and I can't even access my phone through the computer

locked bootloader wont unlock

Hi everyone. Here is the deal im having with my nexus 7 (not the 2013 model) with jop40d.zip. The person I purchased from didnt tell me it was soft bricked. It seems as though he tried to root it but failed while at the same time relocked the bootloader. So I've tried almost everything in my mind to get it back to normal. It wont let me adb sideload the stock rom it says "installation aborted" or any other rom. Also when i boot up it goes directly to the bootloader which gives me the options start, restart bootloader, recovery mode, power off. start obviously does nothing. restart bootloader just for some reason turns the device off, recovery mode takes me the caution sign where i can adb sideload or factory restore. factory restore hangs and doesn't do anything then shuts off. adb sideload always fails when loading up the zip files. i factory restored the cache. I'm not sure what to do anymore. I spent a fair amount of money on this device but now it all seems like a mistake. Can anyone who has fixed this issue help me out? I would deeply and greatfully appreciate it.
-Cheers
truebattleaxe said:
Hi everyone. Here is the deal im having with my nexus 7 (not the 2013 model) with jop40d.zip. The person I purchased from didnt tell me it was soft bricked. It seems as though he tried to root it but failed while at the same time relocked the bootloader. So I've tried almost everything in my mind to get it back to normal. It wont let me adb sideload the stock rom it says "installation aborted" or any other rom. Also when i boot up it goes directly to the bootloader which gives me the options start, restart bootloader, recovery mode, power off. start obviously does nothing. restart bootloader just for some reason turns the device off, recovery mode takes me the caution sign where i can adb sideload or factory restore. factory restore hangs and doesn't do anything then shuts off. adb sideload always fails when loading up the zip files. i factory restored the cache. I'm not sure what to do anymore. I spent a fair amount of money on this device but now it all seems like a mistake. Can anyone who has fixed this issue help me out? I would deeply and greatfully appreciate it.
-Cheers
Click to expand...
Click to collapse
also I wanted to add. I have the android sdk installed and all drivers installed properly. as well as adb/fastboot.
Stop trying to use adb, follow the sticky at the top that says flashing a factory rom using fastboot/return to stock. If you can't type fastboot devices and get a serial number return then the drivers are not installed properly.
Sent from my Nexus 7(2012) that has zero issues.
SlowCobra96 said:
Stop trying to use adb, follow the sticky at the top that says flashing a factory rom using fastboot/return to stock. If you can't type fastboot devices and get a serial number return then the drivers are not installed properly.
Sent from my Nexus 7(2012) that has zero issues.
Click to expand...
Click to collapse
hey slow cobra. yes fastboot does recognize the device. however fastboot oem unlock doesn't do anything.

Stuck in BootLoop and Factory Wiping doesn't actually wipe anything

Nexus 7 (2012)
4.4.4 Stock
KTU84P
HW Version - ER3
Bootloader Version - 4.23
Locked Bootloader
Not Rooted
I have a Nexus 7 sitting in front of me that was dropped off by my aunt in hopes that I could repair it for her. It doesn't look too promising, but I thought I'd consult the mighty fine people here on XDA before I give her the bad news. Here's what she says happened. Yesterday, while preforming day to day activities on it (browsing internet, Skyping, Facebook, etc), the device completely froze. After holding down the Power Button and forcing it to shutdown, she booted it back up. Everything seemed to functioned properly for about 30s - 1min when, at that time, the device turned off and rebooted on its own. After booting back up, it started to repeat this cycle. Basically getting stuck in a bootloop. I personally have never witnessed a bootloop like this before, where the device successfully boots up completely into the OS before turning off and repeating. I'm more used to dealing with ones where it might go as far as the manufacturer logo and then repeats. So anway, as I stated, I only have a 30s - 1min window where I can make changes in order to troubleshoot. The first thing I figured I should do was to go into "About Device", turn Developer Mode on and get USB Debugging enabled. I was able to do this and used "adb devices" to confirm its connection to my computer before it looped again. After its next bootloop I headed back into settings because I wanted to take note of the Android version she was running. As I was navigating there, I noticed that the Developer Options were no longer active. Basically as if I hadn't enabled them yet. This made me start thinking that changes being made on the device weren't sticking. I decided to make a few visual changes to the home screen and see if they were still there after the next bootloop. I uninstalled an app, rearranged icon placement, and changed the wallpaper. Once it shutdown and booted back up again, everything was back to the way it was before the changes had been made. The app I had uninstalled was still there, the wallpaper reverted back, and the icons were back in their original location. At this point I decided to see if I could reboot into Safe Mode. Unfortunately, this doesn't work. I am able to get the reboot to Safe Mode confirmation box and tap "Ok" but it remains in Normal mode when it boots back up. I eventually tried to boot into recovery and preform a Factory Reset. I was able to get into recovery and reset the Nexus. Or so I thought. Instead of seeing a Device Setup screen after it wiped, like I assumed I would, it booted up and still had all the data on it. There were no errors during the wipe and it was confirmed with "Data wipe complete." afterwards.
I am absolutely lost. I've never dealt with such an unusual issue before. Especially with it not even reacting to a complete data wipe. So, just to recap . . . I only have 30s - 1min available to interact with the OS before it reboots itself, any changes made during that time don't stick, Device is successful booting into Stock Recovery, and I can successfully get a Fastboot connection when booting to the Bootloader.
Luckily she has come to terms that this might not get fixed and has decided to go a head an order a newer 2013 model. I'd still like to try any solutions that you all might have. Just in case there is a slight glimmer of hope.
Oh, and one last thing I should mention. I tried to see if I could get the bootloader unlocked but it didn't work. This is the first Nexus I've ever had in my possesion, so I'm not really familiar with the tools available for it. I found WugFresh's Root Toolkit and attempted to Unlock with it. The process seemed to go as it should and I didn't receive any errors on the tablet or in the software. However, in the end, it didn't make any changes to the bootloader.
same problem
I have the same problem as you.
Did you find a solution?
Can anybody help us?
Thanks.
I have a similar problem, but I think mine is related to the bootloader.
I'm stuck on 3.34 and that's where it fails ever time I try Wug's Nexus Tool Kit.
Have you tried Nexus Tool Kit yet?
eawooten said:
I have a similar problem, but I think mine is related to the bootloader.
I'm stuck on 3.34 and that's where it fails ever time I try Wug's Nexus Tool Kit.
Have you tried Nexus Tool Kit yet?
Click to expand...
Click to collapse
I have tried factory reset from recovery, no errors while wiping but when device restarts nothing has happened: I only have a 30s-1min of old system with all my data and apps or directly bootloop.
Also I have tried flash factory images with Nexus Tool Kit and directly from bootloader. No errors while flashing, apparently has flashed new image system. When device restarts nothing has happened: bootloop or my old system with data and apps for 30s before restart.
Myself and a few others are having the same problem... please keep us updated if you find anything out.
http://forum.xda-developers.com/showthread.php?t=2588911

How to boot LG Leon into recovery?

I've successfully rooted my T-Mobile LG Leon, and I've successfully installed TWRP, but for the life of me, I can't get the phone to boot into recovery. I can RE-boot into recovery from TWRP manager, but I can't actually boot into it from a fully powered-down state. I've tried every combination of the power and volume buttons I can think of, and nothing ever works. Download Mode works, the factory restore menu works, but I CANNOT get into recovery. Is there a very specific set of instructions anywhere that I can follow?
EDIT: Okay, I finally figured it out: You need to actually select to do a factory reset, and it throws you into the recovery menu.
Yeah, it was because the stock recovery doesn't exist as a menu, when you're running stock and enter the adb command "adb reboot recovery" it will reboot to the "factory reset mode" and the actual file of this mode is stored on partition named "recovery". Choosing the factory reset option boots the custom recovery because it replaces the said " factory reset mode" and that's the trick.
You can access recovery from the powered off state by holding volume down and power on until you see the lg sign. Without letting go of volume down, depress on the power button before clicking it back in and holding both buttons in until you see twrp pop up.
If you reboot to recovery now, it''ll probally say secure booting error. Simply go to the Developer options and enable OEM Unlock and that'll make you boot to it
You boot in the download mode by holding the vol up 10 seconds and during this 10 seconds you insert the usb. The LG Leon brand screen will come on a minute then it will go into download mode. It says not to unplug until firmware is done updating. So I guess you should have your custom recovery or whatever before you do this. I have only got this far, and thusly it sits. All Dressd up with no where to go...haha
kruc Ire said:
You boot in the download mode by holding the vol up 10 seconds and during this 10 seconds you insert the usb. The LG Leon brand screen will come on a minute then it will go into download mode. It says not to unplug until firmware is done updating. So I guess you should have your custom recovery or whatever before you do this. I have only got this far, and thusly it sits. All Dressd up with no where to go...haha
Click to expand...
Click to collapse
can't find "enable OEM" at all in developer options. have phone hooked computer, and on, it's sending and receiving. No OEM. Isn't there.
See, I'm trying to root this without using KingUser. Since I found that it was pretty easy to do from the very beginning with Samsung, and I just don't see any way to do it here. I can't get ADB Devices command to see the phone.
kruc Ire said:
can't find "enable OEM" at all in developer options. have phone hooked computer, and on, it's sending and receiving. No OEM. Isn't there.
See, I'm trying to root this without using KingUser. Since I found that it was pretty easy to do from the very beginning with Samsung, and I just don't see any way to do it here. I can't get ADB Devices command to see the phone.
Click to expand...
Click to collapse
I think I have the same issue, but I rooted my phone using kingroot, I haven't tested the adb commands, I just want to use twrp but no luck, it says Secure booting error and I can't find OEM Unlock option in Developer Menu.
duffycop said:
I think I have the same issue, but I rooted my phone using kingroot, I haven't tested the adb commands, I just want to use twrp but no luck, it says Secure booting error and I can't find OEM Unlock option in Developer Menu.
Click to expand...
Click to collapse
I got a good way to get it rooted with SuperSU. Ran a command window script I found out there. It worked and now I have SuperSU root. I also figured out how to get into recovery. It looks as though my phone is not the standard LEON that people are talking about here. It's got a few designations, and the T Mobile site advertises a Leon that seems very similar and is called by the name most are using..
Anyhow my LG Leon is designated as a H320. It also carries a v10 desiganation, v10b. The v10 is variable from a-h or a-i. It would seem that once it is updated to 5.1.1 android it gets upped, and becomes unrootable. Mine being a v10b was rootable, but it took me a while to get used to it, and make the command window work.
Unfortunately for me one of many things I tried before getting it rooted, was ADB fastboot. And since this told me to wait for too long, I pulled the plug on it and pulled the battery to get back into "normal" operations. Perhaps I should have waited, because after finding out a few things about the phone, I discovered the true way to get it into recovery:
The real way into recovery for my phone, is to (from power off state) hold the volume up, a few seconds, then plug the USB cable which is going to the computer into the phone. While holding the volume up until it comes to recovery. This will activate the recovery, (Now for me it activates that fastboot command line...and does nothing else). This was the bit of information I could have used from the beginning, that no one knows. All these places tell you to hold the power and volume up, and then let off power when the screen changes, but that never worked even once. You just hold the volume, and plug the USB from computer. This works.
For me it goes into a "FASTBOOT" header at the bottom of the screen that never changes.
I believe it does this because of my unsuccessful attempt to fastboot it before. And it does not have the right driver to get recognized in the computer. So I'm screwed as far as the recovery goes now.
It is rooted though. And it doesn't seem to have any alternate ROMS available anyways. so we're dealing with the loss of the recovery.
When I do try to use an app such as TWRP manager or CWM (ROM) Manager to reboot into recovery, I get a "boot certification verification -1" error instead of the fastboot line at the bottom of the startup screen and it boots normally from there. So many people asked about this "boot certification verification -1" and NO answers are available anywhere online. So that's where it stands for this phone right now.
Anyone know what driver I should use to get the thing recognized in the computer? I have downloaded a zipped fastboot tools, and it won't get recognized inside the driver manager as "android" only as "unknown device" so I can't use that route....I'm thinking about doing a factory reset to try to erase the fastboot attempt. That may not help though. Anyone?
kruc Ire said:
I got a good way to get it rooted with SuperSU. Ran a command window script I found out there. It worked and now I have SuperSU root. I also figured out how to get into recovery. It looks as though my phone is not the standard LEON that people are talking about here. It's got a few designations, and the T Mobile site advertises a Leon that seems very similar and is called by the name most are using..
Anyhow my LG Leon is designated as a H320. It also carries a v10 desiganation, v10b. The v10 is variable from a-h or a-i. It would seem that once it is updated to 5.1.1 android it gets upped, and becomes unrootable. Mine being a v10b was rootable, but it took me a while to get used to it, and make the command window work.
Unfortunately for me one of many things I tried before getting it rooted, was ADB fastboot. And since this told me to wait for too long, I pulled the plug on it and pulled the battery to get back into "normal" operations. Perhaps I should have waited, because after finding out a few things about the phone, I discovered the true way to get it into recovery:
The real way into recovery for my phone, is to (from power off state) hold the volume up, a few seconds, then plug the USB cable which is going to the computer into the phone. While holding the volume up until it comes to recovery. This will activate the recovery, (Now for me it activates that fastboot command line...and does nothing else). This was the bit of information I could have used from the beginning, that no one knows. All these places tell you to hold the power and volume up, and then let off power when the screen changes, but that never worked even once. You just hold the volume, and plug the USB from computer. This works.
For me it goes into a "FASTBOOT" header at the bottom of the screen that never changes.
I believe it does this because of my unsuccessful attempt to fastboot it before. And it does not have the right driver to get recognized in the computer. So I'm screwed as far as the recovery goes now.
It is rooted though. And it doesn't seem to have any alternate ROMS available anyways. so we're dealing with the loss of the recovery.
When I do try to use an app such as TWRP manager or CWM (ROM) Manager to reboot into recovery, I get a "boot certification verification -1" error instead of the fastboot line at the bottom of the startup screen and it boots normally from there. So many people asked about this "boot certification verification -1" and NO answers are available anywhere online. So that's where it stands for this phone right now.
Anyone know what driver I should use to get the thing recognized in the computer? I have downloaded a zipped fastboot tools, and it won't get recognized inside the driver manager as "android" only as "unknown device" so I can't use that route....I'm thinking about doing a factory reset to try to erase the fastboot attempt. That may not help though. Anyone?
Click to expand...
Click to collapse
I dunno, I have the H340AR, with this phones happens the same that with the Samsung Galaxy Ace 3, there are, 3G versions, 4G versions, regional versions, etc.. GA3 have 7275R, 7275B, 7272L, 7272T, I dunno, maybe if we could get a device tree for a H340 and an H320 we could make some TWRP and CM compiling, but I just can't figure it out how to make a device tree or even where to begin..
I successfully rooted my H340AR with Kingroot, it works like a charm. I haven't tried fastboot and I tried to install TWRP in this link https://dl.twrp.me/c50/ but I get that F error "Secure booting error". I guess I have my bootloader locked, so I'm trying to figure out how to unlock my bootloader.
I'm trying to contact with some developers and see if anyone can help me build a device tree.
]
Hi, I have that same phone H340AR LTE. I rooted it with Kingroot and also tried to use TWRP to gen into recovery and got that Security error. I only pulled out the baterry and turn it on again so it booted normally. I made a factory reset because I read that it could be a problem of OTA firmware update. Then I installed TWRP and BusyBox again and tried to get into recovery from TWRP option. When I did that, it showed up the Android lying in his back with a red triangle. I pulled a out the battery again and yes, it seems very dumb and simple but it worked and could reboot the phone.
However, I can't get into recovery from TWRP yet. I read that the problem with us not being able to unlock the bootloader(we don't have the OEM option) is because Leon has Lollipop 5.0.1 and OEM is for 5.1.1
pedrovay2003 said:
I've successfully rooted my T-Mobile LG Leon, and I've successfully installed TWRP, but for the life of me, I can't get the phone to boot into recovery. I can RE-boot into recovery from TWRP manager, but I can't actually boot into it from a fully powered-down state. I've tried every combination of the power and volume buttons I can think of, and nothing ever works. Download Mode works, the factory restore menu works, but I CANNOT get into recovery. Is there a very specific set of instructions anywhere that I can follow?
EDIT: Okay, I finally figured it out: You need to actually select to do a factory reset, and it throws you into the recovery menu.
Click to expand...
Click to collapse
when i pressed factory reset all it did was to a factory reset even though i flashed twrp.img successfully... help?
lg leon h345 lollipop 5.1.1
This device has a locked bootloader. If you flash a custom recovery on it, it will not boot into recovery, but will report a security issue. You will lose all recovery functionality, including factory reset, adb, fastboot. If your phone fails to boot, you have a brick.

Nexus 10 boot stuck on google logo... bootloader ok, but recovery does same thing.

I replaced my GNEX10 battery last january. Aside from the battery calibration being off... (which eventually corrected itself!) it's been working fine. As of late it had rebooted itself while I was using it a few times. A few days ago, it had enough battery such that I left it on overnight. I picked it up the next morning and the notification lamp was flashing so I knew it was still on. I tried to wake it up without success. Usually a quick tap on the power button should do it. Nothing. So I rebooted... and on the google logo it stuck. I knew that a factory reset was probably in order since I didn't do it when I replaced the batter... I got it into the recovery screen... but I could not get the menu. I likely didn't press the right volume rocker. Then I tried again... booted to the bootloader, and selected recovery. This time, and since, only the google logo comes up. No andy on his back with "no command". It just tries to boot into something. I can't do a factory reset this way.
I tried the Nexus Root Toolkit. I can only get it to recognize the device if it's in the bootloader... when I try to use it to boot to recovery, same thing and the NRT says waiting for device... and gets no further. I tried to use it to flash (stock?) recovery but the N10 just sits there on the twrp logo screen and nothing more after temporarily booting into twrp. Just keeps saying "waiting for device"
Anyone have any suggestions! Getting seriously bummed!
So one more data point... I manually rebooted into the bootloader after trying to flash the stock recovery using the NRT. Then it appeared to flash the recovery image.... here is the bit of the log where it ended up:
Checking Fastboot Connectivity
fastboot devices
R32CB04GHGT fastboot
+ Fastboot Device Connected
Flashing Stock Recovery to RECOVERY partition...
fastboot flash recovery "C:\usr\NRT\data\Recovery_Stock\recovery_stock_mantaray_5.1.1_LMY49J.img"
Temporarily Booting TWRP...
fastboot boot "C:\usr\NRT\data\Recovery_Custom\TWRP\twrp-3.0.2-0-manta.img"
Flashing 'undo-perm-recovery-signed.zip'...
Waiting for your device...
That's where it ended up... not getting any further. Once again, attempting to boot into recovery gets it stuck on the Google logo.
How screwed am I? Is there a thread somewhere in the forum anyone can point me at?
Well, in spite of the crickets... I understand. I've managed to resurrect my Nexus 10. Alas there are no good contemporary replacements. The last so-called nexus table google put out there was too damn expensive in the first place and they seem to have abandoned the tablet market to others.
So the key question here: So long as I can get this tablet into the bootloader is it generally possible to reflash a stock image? I'd like to know of any types of caveats etc. The mystery I have still though is: How or why did my N10 get into this state (of of only being able to get to the Google screen) in the first place? I didn't have any questionable apps installed etc. I was totally on stock. One thing that did happen a week or two prior to my tablet going belly up... was somehow the thing lost my google account info and gmail had none of my accounts in place... it was very odd.
I did have to wipe the system because evidently you can't flash anything onto a locked bootloader (the Nexus Root Toolkit by wugfresh is up to date so far as the N10 is concerned at least). I know I could have resorted to using fastboot.exe and the adb directly but this was a touch easier. Alas the backup options for it say you need an unlocked bootloader which seems to be a chicken/egg issue if you've always been on stock.... so it goes.

Categories

Resources