Whenever I connect my MDA Vario to my PC (Dell 700m) I get the blue screen of death which says there is a driver issue. Dont know what to do at all. How to delete drivers? Which drivers to delete?
I'm sure someone must have had this problem, but a search turned up nothing.
Please help =)
If u r using kaspersky antivirus you'll have to get rid of it. It was my problem. When I started using another antivirus, problem has gone.
Greetings.
Thanks for the suggestion, I tried shutting down Kaspersky but I still got the error. I can try an uninstall.
Microsoft's Crash Analysis gives me the following:
Error report summary
Error type: Windows stop error (A message appears on a blue screen with error code information)
Solution available? : No (see Next steps)
What does this error mean?: Windows has encountered an error from which it cannot recover and needs to restart
Cause: Unknown device driver
Computer symptoms: A message appears on a blue screen with error code information (for example: e.g. 0x0000001E, KMODE_EXCEPTION_NOT_HANDLED)
You have to remove kaspersky. Or sync via IR.
Wellcome
Hi, I am using Kaspersky Anti-Virus and have no problems! 8)
So there might be another incompatibility.
Do you use Active Sync 4.1 ??? The older version 4.0 came with my device and didn't work.
this is my experience, I am using ActiveSync 4.1+WinXP Pro+NOD32+Sygate Personal Firewall...
once I connected my mini s to the pc, Sygate like other firewall software asked me for permittion regarding the usb connection...I permitted for sure....
but the initialisation took more 15mins, and the screen freezed....I tried several times and it happened every time...
then I connected my old PPC (with PPC2003)to the pc, nothing goes wrong....
finally, I EXIT the firewall, quit it...not just "allow all traffic"...then the connection works smoothly......
the problem is I need to quit the firewall before I start ActiveSync...
Im using activesync 4.1, so that should be no problem.
Got it to work!!! Killing Kaspersky did the trick.
Thank you
with older versions of kav, u have to switch off lan scan.
for example, with kav 5.0.225 wks, no pb.
I was thinking of switching to Panda anyway
Thanks for everyones Help, very appreciated!
I updated the ROM and the wizard seems to be working much faster, and no more error messages.
mikeusc said:
Got it to work!!! Killing Kaspersky did the trick.
Thank you
Click to expand...
Click to collapse
Anytime
It's the Kaspersky Anti-Hacker that causes the problem, the Anti-Virus and Spam applications are fine.
I was using Kaspersky Personal Pro and I got that Blue Screen. Unninstalled it and everything work fine now.
I’ve searched, and whilst there are a few thread on similar themes, nothing quite seems to help me with the issue I’ve got.
When I try to open some applications I’ve installed, i get the error message “The file xxx cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring the file.”
Reinstalling the applications in question does not help.
I've read various threads saying you should change the security settings on your device by using a program on your desktop PC called Security Configuration Manager. That installs and opens fine, but won't connect to my device, which is recognised and connects just fine using Active Sync. i've tried this on two PCs i have, and neither recognises that the device is connected.
Other thread suggest altering certain registry settings. I've tried to do that from my PC using CeRegEditor, but I get the message "Access not allowed" when I try and save the changes i want to make.
Another thread suggests a program to create certificates, but I'm not at all sure about what this means or how to go about it, or even if it's going to solve the problems I'm encountering.
Surely there has to be some way of changing a setting somewhere, so that an application can be used without it having to have a valid/signed security certificate?
Can anyone help me please? Here's hoping...
Sorted...
The issue cleared itself - how strange!
Microsoft above errors now have a solution:
http://support.microsoft.com/kb/2530409
http://www.theunwired.net/?item=hel...t-tool-to-resolve-faulty-window-phone-updates
MS solution worked for 800705B4 error message.
Spent most of yesterday downloading and installing unlocking hacks as well as Chevron ringtone installer.
Then attempting to force the upgrade. No success.
This morning, after getting to Office, I hooked phone to PC for one last try. Zune opened and phone said Update Waiting.
Got the error message - installed the MS program and upgrade loaded very smoothly.
All programs seem to be working. Unlock has held, as has custom ringtones.
Hi guys,
I have got the access to the App market on my HD2 ( 31.Mar][ROM] BOYPPC-SHIFTPDA WP7 SERIES V3 (build 7.7008)) however, a great number of error appears when i try to instal some application.
I have tried several times, but each time a message error occurs: " Unable to connect to the market at this time please try later". I would underline that wifi or UMTS connection are functioning.
So at the moment I have 6 downloaded but not installed apps in my Hd2.
Any solution?
I got a Venue Pro yesterday. I purchased it on eBay. Hooked it up to perform updates and I couldn't. I constantly get error code 80070002
I have tried it now on two PCs on two different networks, one running Win 7 and the other running Win 8. I have looked on the net but can't really find anything helpful.
Anyway, never having had the phone before I found it odd that it came with a call and message history. Even after I reset the phone it still has a history, pictures of people from Facebook with pictures that are obviously professional shots. All messages are from people each other how great their new Windows phone is.
Also, if I don't use the phone for a couple of minutes it starts a phone demo video/slide show. I am now thinking I have a demo OS even though I can make calls and surf the net. Current OS is 7.0.7004.0
What can I do to totally wipe this phone and start from blank?
Thanks
You'll probably have to follow the instructions in "How to unbrick a Dell Venue Pro." No way to change a demo ROM into a retail ROM. You need to flash the retail ROM and start over.
If you still have the original rom installed on it, could you:
run the emapp tool and write down the contents of what it has?
As far as dell is concerned, I dont believe they normally make demo specific roms.
But that is in reference to their android devices and MS might have had them make an exception for the VP (and it's WP7)
TheManii has a thread over here where he's collecting this data.
Dial ##634# to enter the hidden Engineering Mobile menu.
http://forum.xda-developers.com/showthread.php?t=1479233
Thanks to all who replied. I got it fixed. It was indeed some weird demo ROM or setting but its all cleared up now. I used the unbricking thread listed here
http://forum.xda-developers.com/showthread.php?t=1411300
and downloaded the ROM from here
https://skydrive.live.com/?cid=4da87ed18e0bf92d&resid=4DA87ED18E0BF92D!7216&id=4DA87ED18E0BF92D!7216
I got the UpdateWP too from here
http://forum.xda-developers.com/showthread.php?t=1262471
Only thing to note is to extract the UpdateWP folder and put both files in to the Zune directory on your PC.
After that everything went relatively smoothly. It took 2 or 3 tries to get the Retail ROM to take and from there the phone updated perfectly until Mango. It failed but I just disconnected USB and reconnected and it ran the update.
Thanks again
Same boat
edderspcs said:
Thanks to all who replied. I got it fixed. It was indeed some weird demo ROM or setting but its all cleared up now. I used the unbricking thread listed here
http://forum.xda-developers.com/showthread.php?t=1411300
and downloaded the ROM from here
https://skydrive.live.com/?cid=4da87ed18e0bf92d&resid=4DA87ED18E0BF92D!7216&id=4DA87ED18E0BF92D!7216
I got the UpdateWP too from here
http://forum.xda-developers.com/showthread.php?t=1262471
Only thing to note is to extract the UpdateWP folder and put both files in to the Zune directory on your PC.
After that everything went relatively smoothly. It took 2 or 3 tries to get the Retail ROM to take and from there the phone updated perfectly until Mango. It failed but I just disconnected USB and reconnected and it ran the update.
Thanks again
Click to expand...
Click to collapse
Hi, I just got a phone in the same conditions you have had mention(demo mode), and I thought I have done and taken the same steps to flash my device, but with not avail, the skydrive file has been removed, and I was wondering if you maybe still have them(the files) somewhere and if I could "borrow" them. I mean I think I have the right ROM and the UpgardeWp, but maybe they are the wrong ones, because is NOT working for me.
Thank you very much and I hope you have a fantastic evening.
Israel
*UPDATE* never mind, I was able to do a proper flash, and now I have a good working Windows Phone...
Israel
edderspcs said:
Thanks to all who replied. I got it fixed. It was indeed some weird demo ROM or setting but its all cleared up now. I used the unbricking thread listed here
http://forum.xda-developers.com/showthread.php?t=1411300
and downloaded the ROM from here
https://skydrive.live.com/?cid=4da87ed18e0bf92d&resid=4DA87ED18E0BF92D!7216&id=4DA87ED18E0BF92D!7216
I got the UpdateWP too from here
http://forum.xda-developers.com/showthread.php?t=1262471
Only thing to note is to extract the UpdateWP folder and put both files in to the Zune directory on your PC.
After that everything went relatively smoothly. It took 2 or 3 tries to get the Retail ROM to take and from there the phone updated perfectly until Mango. It failed but I just disconnected USB and reconnected and it ran the update.
Thanks again
Click to expand...
Click to collapse
Hi
I am trying to do the same thing. But when I click the sky drive link to download the rom , there is nothing there. It asks me to login to windows live and thats it. Do you still have this rom downloaded and can you email it to me? OR where can I find this rom? Plz help.
In the middle of the "how to unbrick your dell venue pro" the rom is posted, on some russian download site.
http://forum.xda-developers.com/showpost.php?p=22415484&postcount=35
That file is hosted on my skydrive, and it is still available. It may be asking you to log in to your windows live account to access it. Not sure.
I got it ! Thank you so much!!!!!!!!!!!!!!!!!!!!!!!!!!!!
edderspcs said:
Thanks to all who replied. I got it fixed. It was indeed some weird demo ROM or setting but its all cleared up now. I used the unbricking thread listed here
http://forum.xda-developers.com/showthread.php?t=1411300
and downloaded the ROM from here
https://skydrive.live.com/?cid=4da87ed18e0bf92d&resid=4DA87ED18E0BF92D!7216&id=4DA87ED18E0BF92D!7216
I got the UpdateWP too from here
http://forum.xda-developers.com/showthread.php?t=1262471
Only thing to note is to extract the UpdateWP folder and put both files in to the Zune directory on your PC.
After that everything went relatively smoothly. It took 2 or 3 tries to get the Retail ROM to take and from there the phone updated perfectly until Mango. It failed but I just disconnected USB and reconnected and it ran the update.
Thanks again
Click to expand...
Click to collapse
hi All,
i got a working DVP after doing all steps mentioned in "How to unbrick DVP" after that when i connect my phone to Zune i am getting below error and i am not able to do anything with my phone (data tranfer,update, app install etc), please help meif you can:
ERROR: "RESTORATION ERROR" An error prevented the restoration of your phone to its previous verion.
ERROR CODE: C101002E
i have performed everything that is posted in XDA-developer about this error and when i tried to update/restore/backup from command promt using .cab file i got below error:
Id: \\?\usb#vid_045e&pid_0710#0a1846cd-8203-1781-bc2a-de1974852ebc#
{ca3d7387-f67b-11da-bbec-8000600fe800}
SN: cd46180a - 03828117 - bc2ade19 - 74852ebc
Name: Venue Pro
KITLName: QSD8XXX82BDB791
Manufacturer: DELL
ModelId: 1
Model: Venue Pro
MobileOperator:
Version: 07.00.07004.00-00000
Djha said:
hi All,
i got a working DVP after doing all steps mentioned in "How to unbrick DVP" after that when i connect my phone to Zune i am getting below error and i am not able to do anything with my phone (data tranfer,update, app install etc), please help meif you can:
ERROR: "RESTORATION ERROR" An error prevented the restoration of your phone to its previous verion.
ERROR CODE: C101002E
Click to expand...
Click to collapse
First thing I'd do is do a soft reset if you just flashed the stock 7004 ROM.
Windows Phone > Settings > About > Reset your phone.
Then, just a guess -- go into Zune Desktop > Settings > Phone > Sync Options > [Forget this phone]
Then plug the phone again and see if it lets you set it up as a new device, with update check.
If this doesn't work, the next thing I'd try is moving to another Windows machine, installing a fresh copy of Zune Desktop, and seeing if it will let you update using that. You could also use a Windows installation in virtualization using virtualbox, or an installation on another partition if you are an advanced user.
Basic troubleshooting. Just floating ideas.
Nothing worked
Technosquid said:
First thing I'd do is do a soft reset if you just flashed the stock 7004 ROM.
Windows Phone > Settings > About > Reset your phone.
Then, just a guess -- go into Zune Desktop > Settings > Phone > Sync Options > [Forget this phone]
Then plug the phone again and see if it lets you set it up as a new device, with update check.
If this doesn't work, the next thing I'd try is moving to another Windows machine, installing a fresh copy of Zune Desktop, and seeing if it will let you update using that. You could also use a Windows installation in virtualization using virtualbox, or an installation on another partition if you are an advanced user.
Basic troubleshooting. Just floating ideas.
Click to expand...
Click to collapse
Thanks for your reply.
1. when i clicked on "Desktop > Settings > Phone > Sync Options >" it shows "connect a device" and i am not able to connect my phone becouse after error pop-up, there is only one option "close" and after click on close zune shows "no device connected".
2. i have already tried it on 2 PCs, suggest me other option please.
Djha said:
Thanks for your reply.
1. when i clicked on "Desktop > Settings > Phone > Sync Options >" it shows "connect a device" and i am not able to connect my phone becouse after error pop-up, there is only one option "close" and after click on close zune shows "no device connected".
2. i have already tried it on 2 PCs, suggest me other option please.
Click to expand...
Click to collapse
If you've also tried doing the soft reset as I mentioned, you may want to see if you can use the cab sender method to update to one of the nodo builds.
http://forum.xda-developers.com/showthread.php?t=1306415
A couple quick questions --
Was this your phone and had it been working previously, or was it in this "connect to PC screen" state when you got it?
Can you think of anything you might have done to cause it to stop working?
Is it the AT&T, T-Mobile, or EU/International version?
Did you use a non-english language cab?
Answers:
Technosquid said:
If you've also tried doing the soft reset as I mentioned, you may want to see if you can use the cab sender method to update to one of the nodo builds.
http://forum.xda-developers.com/showthread.php?t=1306415
A couple quick questions --
Was this your phone and had it been working previously, or was it in this "connect to PC screen" state when you got it?
Can you think of anything you might have done to cause it to stop working?
Is it the AT&T, T-Mobile, or EU/International version?
Did you use a non-english language cab?
Click to expand...
Click to collapse
1. yes, i tried a soft reset(resetting the phone from settings->about phone->reset phone) even also perform a soft reset without SD card and try to update from zune without SD card but still getting same restoration error.
i already tried all options cab sender, mangoforall 0.2 etc/ update and restore from command promt:
getting below error everytime whenever i tried to perform any thing from command promt(.bat) :
Error: Exception from HRESULT: 0x801812C0
Call stack:
at wm7update.Program.UpdateDevice(IDeviceInfo deviceInfo, List`1 updates, Upd
ateType type)
at wm7update.Program.Main(String[] args)
2. this is not my phone i got it in a non working state showing "SD card not working".. then i performed steps mentioned in "how to unbrick DVP". after that i got a working DVP.
3. It is a T-mobile DVP and sim unlock by unlock code provided by dell.
4. It is on 7004 Tmobile ffu no cab update til now, as i am not able to send any cab via cab sender.
Note: i don't have any previous back-up of this mobile and not sure wheather the SD card is original or not.