Hello all
i havent used my device inwhile since i got a different phone so i wiped it and now when i start it up and it goes through attready2go but right after the first step it says settings has stopped working and i cant move on from there.
the firmware is 4.4.2 i believe and also rooted. I couldnt find any fixes online, anyone have any ideas? or a way to flash it and install a cyanogenmod so i dont have to deal with attready2go.
thanks to anyone that can help
Clean it up with Odin by flashing NB1 or whatever compatible.
So I tried rooting my galaxy note 4 (Baseband: N910AUCU1COC4, firmware version: 5.1.1) using KingRoot. After it was done it said that it was rooted, but once I rebooted it wouldn't go to the home menu
So I did some research and came upon Kies. I tried using that but it wouldn't even connect to my PC via USB
Then I tried Odin to try and install a stock firmware (N910AUCU1COC4 version 5.0.1), but everytime I did that it would just give me the fail message "SYS REV CHECK FAIL: Refer 2 > Binary 1"
Please help. I just want to be able to use my phone again. Is there nothing I can do?
keep in mind this is my first time using any of these programs and i'm extremely new to this. I'm really desperate at this point
any help is appreciated. thanks
Anyone?
Nevermind, I fixed the problem by flashing a stock rom with a different baseband (N910AUCU2DOI2) from here http://androidromupdate.com/att-galaxy-note-4-sm-n910a-stock-firmware/ and now it's working pretty much perfectly...
...except I don't have my mobile data anymore. Can someone help with that?
I managed to fix that problem as well using this video https://www.youtube.com/watch?v=faZArwrXIO4
Hi, I've been reading the thread for CF auto root to give it a go. I've downloaded the drivers (I've got 1.5.51 now installed, haven't been able to find later ones), I've got the 2.74 SU version that helps to overcome a recent security policy update issue reverting root status and the CF auto root zip file (CF-Auto-Root-hero2lte-hero2ltexx-smg935f.zip) which has odin 3.10.6 included (not quite sure if I can use any recent odin version). I even got my stock firmware com sammobile and extract the proper boot.img from the AP* file (just in case I got something wrong at sometime). I've enabled the OEM unlock too on developer options. I understand I can give it a go without having to go with a custom recovery (still not sure and haven't got the whole picture about the dm-verity thingy and what effects has on the device but someone mentioned something like loosing the encryption or so). This is my first try on getting root on my s7 edge G935F (international version), so it shouldn't have any boot.img problem (but trying to be prepare since I can't go about without my phone being working).
So, I've got my phone into download mode, started odin, loaded on AP the tar.md5 file from the CD auto root zip file (CF-Auto-Root-hero2lte-hero2ltexx-smg935f.tar.md5), connect the device throuhg usb cable and I was expecting Odin to recognize it but nothing happens. Since in the threads I've been researching for s7 edge there is no indication on waiting to see something happening on ODIN (but in some other threads - not s7 edge related though - mention something about having to see a blue indicator on COM), I'm not quite sure if I'm expected to just hit start even if no apparent change is happening on ODIN nor there is some drivers installing/configuring when connecting the device on download mode. Since I'm quite new to this, I'm no sure if I should connect the device first with some other option enabled, like USB debugging or if I'm missing something quite obvious for someone familiar with flashing with odin?
Kind regards for any help!
PS. I did tried to find an answer through searching but foung nothing related s7 edge wise so I'm at a loss not even knowing if just hitting start without having the device recognized on ODIN will do any harm at all (that newbie I am)
Try odin 3.11
Aldo plug your phone in first and than once recognised load the autoroot to ap
skinza said:
Try odin 3.11
Aldo plug your phone in first and than once recognised load the autoroot to ap
Click to expand...
Click to collapse
Thank you skinza for your reply, I did tried what you suggested and although it wasn't enough for getting it solved it helped me to know I was on the correct path and that I could use an updated odin.. finally, the problem was on embarrassing one since I went into download mode but hadn't push the volume up to get into the actual ODIN mode (too newbie of me but I was trying to follow the instructions I'd found and none were that specific - a bit afraid of messing it up). Nonetheless, thanks again for your time! Kind regards!
Edit: Now I'm rooted (thanks CF) and it took less than expected (a couple of mins or so). I didn't go the custom recovery way, so it might have been that.
cmanh said:
Thank you skinza for your reply, I did tried what you suggested and although it wasn't enough for getting it solved it helped me to know I was on the correct path and that I could use an updated odin.. finally, the problem was on embarrassing one since I went into download mode but hadn't push the volume up to get into the actual ODIN mode (too newbie of me but I was trying to follow the instructions I'd found and none were that specific - a bit afraid of messing it up). Nonetheless, thanks again for your time! Kind regards!
Edit: Now I'm rooted (thanks CF) and it took less than expected (a couple of mins or so). I didn't go the custom recovery way, so it might have been that.
Click to expand...
Click to collapse
Not a problem mate
Just fyi you will need twrp if you want to install custom roms like superman rom or echo rom etc
skinza said:
Not a problem mate
Just fyi you will need twrp if you want to install custom roms like superman rom or echo rom etc
Click to expand...
Click to collapse
Thanks again! for now I won't be going for a custom rom but wanted to be able to install a firewall to stop some apps from draining my prepaid data (limited)..
I was planning on having xposed installed but it seems I need a custom recovery for that as well.. I used to have xprivacy on a previous nexus 4 and loved I could limit some permissions that are still missing now on marshmallow but haven't got a grip yet as per the effects due to the dm-verity thing.. would you happen to know anything about it? and I was also wondering about if I do need to have the OEM unlock still enabled now that I'm rooted? (The later because I'd been robbed of my cellphones in the past - even recently a new s7 edge that didn't last me even a month and wouldn't want to let them have an easy pie on having the device available)
Regards!
I'm facing the same issue but even after going into download mode properly after pressing vol up
odin doesn't detect my s7 edge
I've installed all the drivers also
Singhathia said:
I'm facing the same issue but even after going into download mode properly after pressing vol up
odin doesn't detect my s7 edge
I've installed all the drivers also
Click to expand...
Click to collapse
Got the same issue. I'm new with this. My colleague wants me to learn and test and load Lineageos on some brand new S7 G930F devices he gave me which I have already switched to dev mode with OEM unlock and USB debugging on and the devices smoothly jumped into ODIN downloading.... mode
I also have the proper Samsung USB Driver installed. (did it several times after ODIN didn't recognize my device)
However, according to the manual, I should start up ODIN, then connect the device via USB cable to the workstation (as unsuccessful I already tried 3 workstations with Windows 7 and Windows 10) whilst having the phone in download mode... .BUT NOTHING APPEARS in the Log field and the ID:COM Box doesn't change colour and my manual says that it should.
My workstation however recognizes the devices with positive messages so I guess the drivers are good.
My co-worker gave me ODIN v3.10, but as this didn't work I downloaded and installed V3.12, but unfortunately also without any luck.
What am I doing wrong?
which OS?
S7 edge SM-G935F
Hey guys,
i tried rooting my s7 edge but after i got into TWRP my phone went into a bootloop. when i got back download mode, odin still found my phone, though everytime i tried to enter TWRP again, odin said there was a FAIL and my phone immediatly went back into bootloop. I tried to reinstall the samsung usb drivers but now odin cant find my phone anymore.
Before i screw up even more, can someone please help me? right now im stuck in download mode and odin 12, 11, and 10 all wont recognize my phone, also not if i use different cables. my windows laptop however still gives me the device found and device disconnected sound everytime i (dis)connect my phone.
any ideas?
thanks
EDIT: Okay i tried my USB 3.0 port and now odin found my phone. just weird... now i just need to solve the problem that I'm still stuck in the Bootloop but that probably doesnt belong in this thread
Hi,
I recently purchased a Galaxy Tab 4.0 Lite (SM-T337a). I successfully rooted it using Kingoroot but upon restart the entire operating system seems to be gone. It is an overseas tablet (AT&T) that I got through the classifieds here in Australia.
There was nothing on there so I am not worried about losing data, I just want to be able to restore some form of OS onto it.
I can get into Android System Recovery <3e> and have tried installing the stock firmware through the SD card, but so far nothing has worked. I'm also having trouble getting my PC/Mac to identify it.
Any help would be appreciated.
Thanks!
http://updato.com/how-to/how-to-install-an-official-samsung-stock-firmware-using-odin
download this and make the process
https://www.androidfilehost.com/?fid=529152257862688251
you have to flash the official firmware that you can find in sammobile and flash it whith odin. it should that your device is in download mod : down key home and power bottom on the boot
Look for the stock firmware for your model in this thread or somewhere in SamMobile, the language specified doesn't matter anyway cause you can always change that in setup but make sure that you've got the right one for your tablet. Then flash them using Odin
Good evening everyone,
is this the correct Forums part to post questions like this? If not, please tell me where to post, thanks!
As the title says, I bricked my phone. I rooted it some days ago and was trying to unroot it, by installing a stock rom. Since I didn't know how to get the correct Region code, I download a custom ROM which said "everywhere" and guess that was the mistake. I tried to flash it with ODIN, the same way I flashed the custom ROM back then, but ODIN showed an error (which I can't remember). So in the end I pulled the cable and now have an error upon start up which says "An error has occured while updating the device software. Use the emergency recovery function in the Smart Switch PC software". Said software doesn't offer any emergency recovery function.
I can still boot into download mode. I tried to install the custom ROM again, but but ODIN doesn't recognize the phone.
What can I do to fix this? What additional information do you need to provide help?
I thank you in advance for all suggestions and wish you a nice evening!
~Guppy
I have the same problem.. what can i do?