Hello guys ,
My friend did update his GT-I9505 device using kies via pc . After updating his device , he's having problem connecting wifi . When he connect to wifi , its like the wifi kick out and the error "the device has detected an apps attempting unpermitted action and has stop loading" came out , and asked him to reboot his device . He did reboot his device for a thousand times , but still the error came out and asked to reboot .
Any solution guys ?
Sent from my GT-I9500 using xda premium
xuserx0895 said:
Hello guys ,
My friend did update his GT-I9505 device using kies via pc . After updating his device , he's having problem connecting wifi . When he connect to wifi , its like the wifi kick out and the error "the device has detected an apps attempting unpermitted action and has stop loading" came out , and asked him to reboot his device . He did reboot his device for a thousand times , but still the error came out and asked to reboot .
Any solution guys ?
Sent from my GT-I9500 using xda premium
Click to expand...
Click to collapse
try to wipe data and cache from recovery
Hey guys i've Hard Bricked my Yureka. Phone Doesnt turn on nor goes to fastbooot, instead is only detected in windows as Qusbs-Bulk. Please help ME
Follow the steps shown in link below;
https://cyngn.com/support/
http://forums.yuplaygod.com/threads/factory-images-and-flashing-tools-official.2178/
But my phone does not boot into fastboot
Search at play god forum, there are some procedures given there which may solve your prob. http://forums.yuplaygod.com/threads/help-completely-bricked.4641/#post-45794
HI thanks for help but in all above cases they were soft bricked ..i.e their phones booted in fastboot but mine isnt.
Hmmm ... seriously worried situation haan. {Kiya kya tumne}
If you can tell us what exactly you did, may be then we can help.
I also hardbricked when i tried to port MIUI. But i got replaced by YU without any cost and within 3 days
Exactly me too flashed miui of f2 without boot.img..Was trying to port...
@ Suhas Is the new phone same as old one or a used one??
suhas.holla said:
I also hardbricked when i tried to port MIUI. But i got replaced by YU without any cost and within 3 days
Click to expand...
Click to collapse
I also hardbricked when i tried to port MIUI, Now waiting for the repacement.
Called them and raised the ticket 6 days before, but they are yet to dispatch.. . . . Very frustrating !
Do you have any information on how to unbrick. I searched much but wouldn't find files to unbrick !
1. 8939_msimage.mbn
2. MPRG8939.hex
3. rawprogram0.xml
4. patch0.xml
Hope some one comes to rescue me :crying:
Video Tutorial HOW TO UNBRICK YUREKA
Srry i cant post the youtube link as i am new here
Just go to youtube
Search kanwal deep unbrick yureka
And watch the video
To go in fastbool mode remove battery insert again and press vol up while connecting usb
quakze said:
I also hardbricked when i tried to port MIUI, Now waiting for the repacement.
Called them and raised the ticket 6 days before, but they are yet to dispatch.. . . . Very frustrating !
Do you have any information on how to unbrick. I searched much but wouldn't find files to unbrick !
1. 8939_msimage.mbn
2. MPRG8939.hex
3. rawprogram0.xml
4. patch0.xml
Hope some one comes to rescue me :crying:
Click to expand...
Click to collapse
ahh Same situation I too searched for that files when i had bricked my device
Since the chipset is new. So not able to find
suhas.holla said:
ahh Same situation I too searched for that files when i had bricked my device
Since the chipset is new. So not able to find
Click to expand...
Click to collapse
I have got rom of Huawei C199s (MSM8939), which has many file packed into UPDATE.APP.
I have unpacked it, but the file name and extensions are unknown.
At present I am trying to identify the msimage.mbm and mprg files.
The rom link is http://www.needrom.com/wp-content/uploads/2015/03/C199s-V100R001C92B260-Telecom.zip
Shrihari007 said:
Hey guys i've Hard Bricked my Yureka. Phone Doesnt turn on nor goes to fastbooot, instead is only detected in windows as Qusbs-Bulk. Please help ME
Click to expand...
Click to collapse
ask for replace in customer care. as they told they will replace your mobile even after unlocking boot loader, root.
my device also gone hard bricked not get into the fastboot mode..
and no customer care no. to contact not correct > this one 18602122122
any help
thnks..
You guys can take a look at this thread -
http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
Hit thanks to the creator and me if helped.
suhas.holla said:
I also hardbricked when i tried to port MIUI. But i got replaced by YU without any cost and within 3 days
Click to expand...
Click to collapse
What did you tell the customer support about your phone getting bricked.
I tried calling the support, but they said that they will chargers. 3000 for replacing .
please help
my device got bricked 2 days ago and now there is no fastboot mode and not even the led lights showing up if the device is connected to the pc!! and whats even worse the cc is not picking up the calls
my mobile also hard bricked.
suhas.holla said:
I also hardbricked when i tried to port MIUI. But i got replaced by YU without any cost and within 3 days
Click to expand...
Click to collapse
hi.... my yu yureka also get hard bricked after installing lollipop update from yu.. please tell me the steps you followed to replace your yureka...... please reply fast...
:crying::crying::crying:
issue regarding in functionality in yu yureka after upgrading with lpllipop
dear sir,
my name is anurag. i am using yureka ao 5510 phone after launching official update for phone i upgrade my phone.
i faced sevral problem after updating. the list are provided below.
1) overheating device than normal one while comparing with kitkat.
2) automatically turned off and un- responsive and on screen multicolor circle appeared wih cross over circle, its upto 5-6 hrs after that suddenly screen appeared after turning on mobile and start working.(in this process sevral times i remove battery & reinsert and trying to start it normally).
3) when phone connecting to wi-fi hotspot network (apple tablet over 3g) and i am trying to update apps from playstore its not updated(google play services unfortunately stopped) over wi fi network, but its working good on mobile data.
4) now currently issue in brightnesss control and in setting < storage option < USB computer connection the checkbox option are not apperared & phone not connected to computer(using windows 8.1 ),
please kindly fix this buges...
and provide some patch or system updates as earliar as possible to overcomethis issue.
Hi, i want to fix a phone of my friend by flashing it with odin, but things go wrong, the phone after failing wont start or respond to any button, i dont know what to do, please any help would be appreciated
Samsung Galaxy J1 SM-J100H
Edit:
Thanks xEmre66 for your reply, unfortunately no, i think i break the boot image, the phone wont boot on download mode even if i use 300k jig, i think the only solution is to use an sd card filled with the boot image, but i dont find in website a solution like that.
I tryed many solution but no one work, please if someone have the some problem tell me.
Can you get into the DownloadMode? (ODIN MODE)???
Sent from my SM-J100H using XDA-Developers mobile app
---------- Post added at 08:58 AM ---------- Previous post was at 08:57 AM ----------
I have this phone but it is not my main phone but maybe I can help you.
Sent from my SM-J100H using XDA-Developers mobile app
i'm working on this problem..
i resolved,
share there
OSKCHAST said:
i resolved,
share there
Click to expand...
Click to collapse
Please can you share the solution ?, i cant fix the phone.
same problem here
I have same problem here, samsung j100h of my friend do not boot, i download odin and correct rom to flash i flashed device correctly, but device now is fully dead, display not start, black screen, my win10 not recognise device, now cant flash using odin and using sp_flashtool....
device respond at win10 when i push vol up + power but can't make anything
i try to install all drivers signed and unsigned from samsung and mkt.. nothing works any idea???
caseres84 said:
I have same problem here, samsung j100h of my friend do not boot, i download odin and correct rom to flash i flashed device correctly, but device now is fully dead, display not start, black screen, my win10 not recognise device, now cant flash using odin and using sp_flashtool....
device respond at win10 when i push vol up + power but can't make anything
i try to install all drivers signed and unsigned from samsung and mkt.. nothing works any idea???
Click to expand...
Click to collapse
You broke the boot image. I'm sorry but you hard bricked the device. I had this phone but it was terrible because of its touchscreen. Maybe I could help you. Send me a PM and describe how you really broke the device.
xEmre66 said:
You broke the boot image. I'm sorry but you hard bricked the device. I had this phone but it was terrible because of its touchscreen. Maybe I could help you. Send me a PM and describe how you really broke the device.
Click to expand...
Click to collapse
same in here. I flash original rom from sam mobile site and my samsung sm-j100h is bricked now. i flash using odin and everthing was ok and it was pass. but nothing happend later on, screen remains black and I don't know what to do.
or atleast tell me can I get somehow all data stored on phone, if yes how to do it
guys still nothing???
same problem guys i bricked the phone 2 days ago with the original firmware from sam mobile u.u i put my samusung j1 in download mode and with odin i done the reflash odin it was green and said me passed but then when i tried to turn on the phone nothing happened my phone is died hard bricked is there a guys something to do to repair him?
i got the same problem..
the phone was completely DEAD after i followed all the instructions here => https://www.youtube.com/watch?v=1T9fxno2s68
Please somebody help us..
Here's my thread => http://forum.xda-developers.com/android/help/help-sm-j100h-dead-power-flash-t3511894
Thank you very much..
im using sm j110h and i too flashed orginal stock rom via odin but unfortunately i forget to put the batteries on and i fonud that after that i got pass message only now the screen remaines black and not getting to download mode and not switching on. does anyone help me on this problem hope will get a solution thanks in advance
Gal J1 of sadness.... but still hoping
2 days ago a friend asked me to fix his J1 stuck in boot image. I gladly said yes for I've done it 4x already different units same model with satisfying results. This one is the exact opposite because after flashing with Odin and getting the Passed result, the phone didn't reboot. Actually it never booted right after that moment. System didn't recognize the phone not even a dim light or blink or any reaction from it even when plugged in a wall charger. tried all possible solutions even the galaxy tab procedure of total batt drain and so on. The firmware I got is from xda, J100MLDXU0AOB3_OLC0AOB5_v4.4.4_Repair_Firmware.zip, and I'm sure it's fine because I've used it already with good results...
Guys, any of you with a solution on this or any suggestions would be much appreciated... Thanks very much in advance!!! :fingers-crossed:
Chrisjopett said:
2 days ago a friend asked me to fix his J1 stuck in boot image. I gladly said yes for I've done it 4x already different units same model with satisfying results. This one is the exact opposite because after flashing with Odin and getting the Passed result, the phone didn't reboot. Actually it never booted right after that moment. System didn't recognize the phone not even a dim light or blink or any reaction from it even when plugged in a wall charger. tried all possible solutions even the galaxy tab procedure of total batt drain and so on. The firmware I got is from xda, J100MLDXU0AOB3_OLC0AOB5_v4.4.4_Repair_Firmware.zip, and I'm sure it's fine because I've used it already with good results...
Guys, any of you with a solution on this or any suggestions would be much appreciated... Thanks very much in advance!!! :fingers-crossed:
Click to expand...
Click to collapse
PM me pls and tell me how you flashed it etc.
Help
I have same problem,hard brick.Can anyone help?
somebody got solution? i did update by kies and now the phone is dead at all. i can use odin mode and also can using recovery anymore. hmm i think my problem come from the battery :crying:
kkq29 said:
somebody got solution? i did update by kies and now the phone is dead at all. i can use odin mode and also can using recovery anymore. hmm i think my problem come from the battery :crying:
Click to expand...
Click to collapse
Can you get into Odin Mode? If yes, flash the stock firmware of your region (here is a fast server which provides very fast downloads: fw.updato.com) If no, then you should change your battery as you're saying "it came from my battery" and try the first step again.
If it doesn't help as expected, then your phone is hard bricked and can't be repaired at all. The only solution would be changing the motherboard, but I would not waste my money on a low-end device motherboard and I would directly buy a new phone. :/
Regards,
xEmre66
If I am correct...
Then SM-J110H have Spreadtrum SC7727S
Here is Pinout for Direct eMMC...
https://postimg.cc/image/ul680l5jv/
This Pinout seems also to work with:
Code:
SM-G318HZ
SM-Z130H
I have leaked SM-Z130H PDF... where Instruction is inside to repair with tweezer... USB cable + Spreadtrum Tool:
Code:
[B]ResearchDownload[/B]
In theory something similar should be possible with SM-J110H...
I have at the moment only 1 problem... to create PAC file...
No idea from where I can get:
Code:
FDL1
FDL2
Best Regards
Edit 1.
Sorry, seems I was drunken...
It is sooo hard to find Posts or Threads about SM-J110H...
But it seems SM-J100H also Spreadtrum device...
xEmre66 said:
PM me pls and tell me how you flashed it etc.
Click to expand...
Click to collapse
PM me too please
My teacher phone has a same problem, hehehe.
same problem here. my phone got stuck up with samsung logo then i just dowloaded a firmware on sammobile and i flash it via odin at first it passed then my phone did'nt turn on anymore.
J100H / DD Finding Deadboot solution
Hi ... guys me too having this sort of problem and i found bad about samsung using 32bit - Spreadtrum SC8830A EMMC chipset here
Fix solution Not Found still! if i done i will tell you!
on = SM-J100H/DD --- corp =samsung yateley, uk
ok friend iam searching for Solution for 3days bt i found none= with a clue
It is J100H on serial port= SPRD U2S Daig (ComXX) usb says= SPRD COM Emumerator
this means - all sprd flashing been done on this 2 port only - in Miracle Box it says -
Scanning USB Serial port...
SU2Serial Port: COM64
Connecting to Phone,Wait..
Done.
Infor: SPRD3
Initialize boot19...
>>BootLoad Error. ID: 1
so my option is if we build a sprdp.bin and flash in AP(PDA) it will boot to Download mode
and dont ask me where is that file i dont no - if any one can provide a real backup pit.pit file
via phone to me i can find something and let u know it. Only from a alive phone J100H/DD
plz friends i need help any dumps or pit. and if any one has a alive J100H/DD please tell me.!
so i can get some help from u --If you wish to help
PLEASE HELP me. i just charging my samsung grand 2 sm-g7102 and the downloading mode was appeared and after that my phone not charging and turn on. what can i do for this problem ? thanks in advance!
Hello..
That sound pretty wierd but can u enter recovery or download mode manually by pressing vol +-, home and power button? If not... Then I would recommend you to claim for a warranty ( if applicable ).
Might be hardware problem.
Sent from my 4027N using Tapatalk
you need to flash your phone by Odin in pc
and try to flash a recovery first
just start Odin and select the zip file then connect your phone to the pc and see if the phone is detected
if it's not then maybe your phone is hard braked that time you need jtag and search about the problem more in xda
Please help... When I turn on mobile data on my yureka no LTE sign appears on both the sims and even internet doesn't work. I've tried restarting and airplane mode but nothing works!!! Even the APN is official one.... The problem started when I installed quarkos 3.0 on my device... I need the solution asap....:crying:
Help fast¡!!!!!
Please help me fast.. . I need the solution asap!!!!