There seem to be only a few versions to root my Yotaphone. Which one is the simplest to run apps such as AFWall+ or AdFree or similar?
If I follow the instructions to flash TWRP, do I get a rooted phone then (e.g., http://forum.xda-developers.com/yotaphone-one/development/twrp-3-0-2-0-yotaphone-2-t3494023)?
Related
There are a few threads that deal with upgrading lollipop to marshmallow, but they seem to raise as many questions as they answer - mainly since they were usually written before rooted images were distributed.
Basically, I am on an unlocked, rooted stock XT1575 with TWRP 2.8.7.0. It sounds like it's less efficient and has lots of potential problems to go back to stock, unroot, install OTA, do new system root, and re-add TWRP.
Instead, it sounds like the simplest method to get to stock rooted MM, with least steps and potential problems, should be this:
Update TWRP to 2.8.7.1 using IMG file here from within TWRP Recovery (TWRP Manager did not install it when I tried via Android proper - I was still at 2.8.7.0)
Do a full TWRP backup of my current Lollipop stock rooted installation (I assume this means I can restore without problems if the MM install goes awry)
*Optional: Use Titanium Backup to backup settings of important apps, and text messages/MMS.
In TWRP, Wipe->Swipe to Factory Reset
Transfer to phone and Flash via TWRP the stock rooted odexed ROM from this thread (not sure if there is a good argument for deodexed? I've never gotten a clear answer why one should be better, but would stick with odexed just because I believe it is "stock" so maybe less problems?)
Install SuperSU 2.62 from this thread by simply flashing it as normal in TWRP 2.8.7.1.
Reinstall all programs on initial setup. [*Optional: Reinstall via Titanium backup]
I assume if I do this I will: have marshmallow; have root; have working TWRP.
Does anyone see any obvious problems with this method? Thanks, I really appreciate any comments.
EDIT: Yes, I tried this method. It all worked, except I've added SuperSU installation steps that worked for me, since the "Stock Rooted" ROM is NOT actually rooted when I flash it. Also, used Titanium Backup successfully for some programs, so added that as an option.
Sorry to bump, but any response from someone with experience would be very helpful. I just want to make sure I don't have to go through the whole unroot/OTA/reinstall TWRP/reinstall root procedure that every thread says seems to cause problems...
Answered my own question - edited the main post to show the method used successfully.
Thank you for this answer thread. I was looking for the simplest answer for upgrading to MM without having to unroot and reflash everything. Looks like this is the easiest for now (I have having to reinstall everything, since some games I play to NOT react nicely to data being restored via titanium).
Have a brand new XT1575 with 5.1.1, Does the MM Update break root ability. I primarily want it for xposed, adaway. No ROMing
Should I update and then root? or root and then update?
I personally have found that following this method breaks root possibilities. MM is rooted, but when I got to the point of installing SuperSU via these steps, it broke EVERYTHING (settings stopped working, Motorola Services stopped working, etc).
I have to start from scratch again now.
I already had root on a much older build. I'm on BOK3 (Verizon). Root Check shows I have root, supersu seems to be working, I can drop into su via a terminal, but most my apps that require root aren't getting it. Cleanmaster, Autostart Manager, AppFreezer, Helium (None can use root). I was able to install BusyBox. Supersu shows that all these apps have root permissions granted after I was prompted. I tried setting Supersu to always allow root without prompting but it didn't work. Supersu always says that it has granted access for an interactive shell. I have no idea what to do. My phone sucks without root
Here is what I did to upgrade and keep root. I followed the instructions perfectly and everything seemed to work (But obviously not so well): http://forum.xda-developers.com/verizon-galaxy-s5/general/how-to-update-to-g900voe1-5-0-keeproot-t3149784
Any help is GREATLY appreciated.
Good afternoon,
After MUCH research, I have arrived at the conclusion rooting the D6616 with T-Mobile's likely final Z3 build for 5.0.2 (Build 23.1.C.0.399 and, really anything past KK) is no longer possible without involving Kingroot.
Why does this matter? Because there may not be a feasible way to remove the most recent builds of Kingroot from the D6616 ROM. Using Kingroot's own uninstaller in the App settings fails and factory resetting using the ROM/stock recovery threw my phone into a bootloop. Other users report it successfully factory reset their ROM with kingroot installed as a system app and their device no longer rooted. I attribute the variety of outcomes to different software builds and Kingroot versions.
It seems as though the only working root method also uses ZXDualRecovery. Though I have not tried it, all procedures that show the ZXDualRecovery method of pushing recovery and superSU involved rooting the device with Kingroot first and removing it after SuperSU is installed. This appears to be the only still-working method of acquiring temporary root long enough to install recovery. The only way to remove Kingroot is to use flashtool and a new Sony TFT, which also removes root and recovery.
Has anyone successfully been able to pull off rooting a D6616 lately? I want to keep this phone but it is unfortunately useless to me without working root so I'll likely be returning it if nobody still has one that's running the last software with a locked bootloader.
I would really appreciate any help anyone can give.
I believe I have done it! I think SuperSU is ever so slightly ahead of Kingroot.
What I did:
1) Rooted via Kingroot app on Google Play. Run rootchecker after it's done its business to make sure. DO NOTHING ELSE IN THE APP. Doing so may prevent SuperSU from kicking its ass later.
2) Downloaded and upacked to desktop the file for Xperia Z3 from here:
http://nut.xperia-files.com/path/XZD...ecovery_2.8.26
Z3-lockeddualrecovery2.8.26.-RELEASE.combined.zip
3) Disabled antivirus
4) Installed USB drivers via Windows 7 plug-n-play. Unplug phone.
5) Downloaded SuperSU recovery flashable zip from here:
http://www.supersu.com/download#zip
6) Ran install.bat from extracted ZXDualRecovery zip
7) Enabled developer options in phone, enabled USB debugging, revoked USB devices, rebooted phone, plug in phone.
8) Connect Phone, wait for device to register in windows.
9) Okayed communication from PC.
10) Place in USB Install Mode on phone.
11) Choose option 2 to install to device rooted by SuperUser. Kingroot has blocked option 1 (old method)
12) Enter TWRP (Automatic) and go to Backup, check all boxes, create Nandroid by sliding the slider
13) Reboot, ensure phone boots. Put SuperSU.zip on the external flash drive. Go to your new App: NDR Utils. Choose TWRP as Primary Recovery. Choose Reboot to Primary recovery
14) Flash zip for SuperSU. DO NOTHING ELSE. Do not wipe cache, do not fix permissions. Click REBOOT.
15) Launch SuperSU App. Attempt to update Binaries. It will not, but it will detect Kingroot, and somehow can get rid of it itself using onboard capabilities. It will do so and update binaries.
16) Reboot (Automatic via SuperSU)
17) Check to make sure SuperSU binaries installed by launching the app.
18) Reboot to recovery using the steps from step 13) above.
19) Create another backup using step 12) above
20) Reboot and DONE.
To the best of my knowledge, nobody has indicated how to do this in a clear Step-By-Step for the final build of this ROM. So because I've troubled you all for small chunks of the process I figured I would.
This applies to T-Mobile's likely-final software release for the Xperia Z3 android 5.0.2 on build 23.1.C.0.399.
DISCLAIMER TO ANYONE ATTEMPTING THIS: It appears Kingroot is "onto" what it is being used for. Given the behavior of this application, there is no reason for anyone to believe it is not a malicious program, but it is a necessary evil for this purpose. Newer versions of SuperSU are capable of removing Kingroot on their own, but alternative methods may be necessary. I attempted an earlier version of SuperSU and it was incapable of removing Kingroot.
It might remove via debloater. This is the only way to remove the system apps on this phone reliably, so you WILL need it if you intend to keep the bootloader locked. I couldn't get any root-enabled appstore app to do it including ES File explorer and Titanium Backup. It looks like you need a computer to remove system apps on this phone. Fantastic. Debloater works great though so don't be afraid to use it. Use the filter to search for Apps. You can remove them, but they will not be gone until you reboot your device. Hooray no more filecommander and lookout! Debloater can be found here:
https://forum.xda-developers.com/and...bloat-t2998294
Plug in your phone. Give it root access. Easy peezy.
Then Xposed current framework and installer:
https://forum.xda-developers.com/sho....php?t=3034811
Version 3.1.1 fixed the bootloop problem, so you shouldn't need the fix zip, or at least I didn't. But if you do, you can find it here:
https://dottech.org/187028/how-to-fi...-z5-z4-z3-tip/
Flash the framework for your device in recovery (arm) and then the installer APK from the ROM using a file browser.
FINALLY Youtube Adblock and minimized playback. SCORE!
I think that's about it. That's literally the best we can currently hope for from this device. I think there is an Xposed module to heavily alter the look of the ROM here but I have not tried it. Plus it only claims to work w/ 4.4, and we have 5.0.1.
https://forum.xda-developers.com/z3/...6#post71601966
For devicewide adblocking I use DNS66 since there are no proxy settings for adblocking on this device, unless I'm missing something. I really hope I am. This means there's no native adblocking.
Xposed modules worth using you can find by searching in the Xposed store: Blurred System UI (LP), Gravity Box [LP], RootCloak, Xperia/AOSP NavBar Buttons, Xperia Super Radio, YouTube AdAway, YouTube Background Playback. And of course DNS66 (PlayStore).
I have tinkered with the rest and find them of no value.
I followed the steps but SU didn't ask to update anything. It just opens up and everything is fine?
Then all I did was unistall kingroot(purify) and it looks like it's gone, but is it?
Just leaving this here, this is how I rooted on Android 5.0.2 with the D6616
http://nut.xperia-files.com/
Read the documentation that comes with the latest XZDualRecovery and flash SuperSU or whatever you want.
stef-nix said:
Just leaving this here, this is how I rooted on Android 5.0.2 with the D6616
http://nut.xperia-files.com/
Read the documentation that comes with the latest XZDualRecovery and flash SuperSU or whatever you want.
Click to expand...
Click to collapse
Were you able to install twrp without rooting first on your PC? It doesn't work for me. I did option 3, install on unrooted device.
Are you able to systemless root?
When I run the installation it fails at step 3 on the install bat.
Hi, a bit of an old thread, but has anyone had any success rooting the D6616 without using Kingoroot or Kingroot? Both are malware which are designed to not be fully removed and be as resilient as possible, and uninstall does not actually uninstall them...
Yes, the old method still works. Use the search feature. I'd just link you, but I"m busy at the moment.
i followed these steps, and have gotten to the point where you flash supersu and reboot, but i'm stuck in a reboot loop now. wanted to use this old z3 as a dedicated audio player, and needed to root for some audio enhancements...
edit: i did have TWRP for a minute, but now when i go into recovery it's the stock recovery again, with options only to continue booting, boot to safe mode, factory recovery or power down. the first two options return to a boot loop. can/should i attempt to use flashtool, or factory recovery? i don't want to accidentally wipe something i might need in the backup.\
UPDATE 10/19: I was able to get back to ground zero using Sony's xperia companion software repair. Flashtool 9.25 and 9.26 would never successfully install flashmode drivers, nor would it display the stock .ftf file.
fierogt42 said:
Yes, the old method still works. Use the search feature. I'd just link you, but I"m busy at the moment.
Click to expand...
Click to collapse
this new method seems to fail for me on both of my old z3's. does the method you're referring to involve downgrading to 4.4.4? i've done some extensive searching of this forum (and the android development ones as well) but don't seem to be able to find any other info.
I've been trying to use multiple apps on my phone that won't work because of my root. What's the easiest method of using them?
I followed this guide while rooting my G4:
https://forum.xda-developers.com/moto-g4-plus/how-to/guide-how-root-nougat-moto-g4-plus-t3484672
It's a Moto G4 on Nougat NPJ25.93-14. Can I do anything without the risk of wiping or bricking my phone. I've seen many guides and I'm a bit overwhelmed with all of the options. I've seen people mention Magisk, Xposed Framework or flashing the original ROM back onto my device. I'd preferably like to use the easiest method available
Thanks
Dear all,
I just got an old V500 and I plan to install LineageOS which I already did for a couple of other devices. The main reason is the increased safety by having recent Android security patches.
Therefore, I want no rooted device. However, according to the install instructions (https://wiki.lineageos.org/devices/v500/install), the installation process of LineageOS for the V500 seems to require rooting.
This again works with the procedure given here (https://forum.xda-developers.com/lg-g-pad-83/general/guide-root-twrp-customrom-kot49i-v50020d-t2894277) and requires several downloads where even my Windows Defender warned me about downloading. So I am very skeptical and I have five questions:
Is rooting really needed to install LineageOS on the V500?
Will those files I have to download for rooting and opening the bootloader "survive" on the tablet, or are they only needed to "inject" TWRP and LineageOS? Can you guys confirm these files are not obviously malware?
Will the resulting LineageOS installation be rooted (if I do not install the optional ZIP for root)?
Will OTA updates for LineageOS work?
Is there a way using less downloaded stuff from pages offering me malware? So could I use a "more established" rooting tool (say, Kingo Root or something) and then download Flashify from the Play Store to install TWRP and LineageOS? Will that work as well?
Thanks for help!
root is dangerous!
Root is necessary to flash custom recovery.
There are different methods for root.
I chose the Stump method because it does not require an internet connection during root.
If you will be using an application that supports root, do not forget to set the PIN to access su.
Topster77 said:
Dear all,
I just got an old V500 and I plan to install LineageOS which I already did for a couple of other devices. The main reason is the increased safety by having recent Android security patches.
Therefore, I want no rooted device. However, according to the install instructions (https://wiki.lineageos.org/devices/v500/install), the installation process of LineageOS for the V500 seems to require rooting.
This again works with the procedure given here (https://forum.xda-developers.com/lg-g-pad-83/general/guide-root-twrp-customrom-kot49i-v50020d-t2894277) and requires several downloads where even my Windows Defender warned me about downloading. So I am very skeptical and I have five questions:
Is rooting really needed to install LineageOS on the V500?
Will those files I have to download for rooting and opening the bootloader "survive" on the tablet, or are they only needed to "inject" TWRP and LineageOS? Can you guys confirm these files are not obviously malware?
Will the resulting LineageOS installation be rooted (if I do not install the optional ZIP for root)?
Will OTA updates for LineageOS work?
Is there a way using less downloaded stuff from pages offering me malware? So could I use a "more established" rooting tool (say, Kingo Root or something) and then download Flashify from the Play Store to install TWRP and LineageOS? Will that work as well?
Thanks for help!
Click to expand...
Click to collapse
1, Yes.
2, Don't know.
3, No.
4, Yes.
5, Don't know.
ze7zez said:
Root is necessary to flash custom recovery.
There are different methods for root.
I chose the Stump method because it does not require an internet connection during root.
If you will be using an application that supports root, do not forget to set the PIN to access su.
Click to expand...
Click to collapse
Thank you, I was looking on how to root this tab, and stump method worked great on mine, fffiou