Note 3 modem baseband bootloader not updating via odin - Galaxy Note 3 Q&A, Help & Troubleshooting

Hi every one.
I was trying to update my n900w8 note 3 to 5.0 lollipop via odin but i can't update my bootloader version or modem file i tried many ways to flash BL and Moden file via odin but it still on old virsion can't update don't know way.
I an on Baseband version : N900W8VLUCNB7
Please help me.
Sorry for my bad english.

Instructions .
http://forum.xda-developers.com/galaxy-note-3/general/direct-download-bootloaders-modems-t3258803

JJEgan said:
Instructions .
http://forum.xda-developers.com/galaxy-note-3/general/direct-download-bootloaders-modems-t3258803
Click to expand...
Click to collapse
Thanks for answering i will try it later and inform you.

turn you phone off and take battery out.
put battery back and power on to download mode
connect to pc
run odin
make sure that "phone bootloader update" is checked
make sure "auto reboot" is unchecked
start upgrade. once finished disconnect from PC and pull battery off.
put battery back and power on.

Thank you both the method works now every thing is fine and working thank you all.

Related

HELP: I bricked my Note 3 (N900). Forget to enable USB debugging before flashing!

I have just bricked my newly-bought Note 3 (N900).
I wanted to flash the latest version of Note 3 via Odin 3.08 (from 4.3 to 4.4.2). I made a big mistake as I didn't enable the "USB DEBUGGING" mode before go to download mode.
I clicked start in Odin and it show FAIL!!!
After I restart the phone all I see on the screen is the message "Firmware upgrade encountered an issue Please select recovery mode in Kies & try again."
I tried to recover it through Kies, but the it shows the phone is not connected or not support. Meaning the Kies cannot communicate with the phone at all.
I also tries to flash in Odin many times, but it still fails.
Please!!! Can anyone here give me some solution.
Thanks.
boycam said:
I have just bricked my newly-bought Note 3 (N900).
I wanted to flash the latest version of Note 3 via Odin 3.08 (from 4.3 to 4.4.2). I made a big mistake as I didn't enable the "USB DEBUGGING" mode before go to download mode.
I clicked start in Odin and it show FAIL!!!
After I restart the phone all I see on the screen is the message "Firmware upgrade encountered an issue Please select recovery mode in Kies & try again."
I tried to recover it through Kies, but the it shows the phone is not connected or not support. Meaning the Kies cannot communicate with the phone at all.
I also tries to flash in Odin many times, but it still fails.
Please!!! Can anyone here give me some solution.
Thanks.
Click to expand...
Click to collapse
make sure kies is not running then try odin again
jaythenut said:
make sure kies is not running then try odin again
Click to expand...
Click to collapse
I tried many time already, but still fail. I think because the usb debugging mode was not enable at the first place.
Thank anyway.
boycam said:
I tried many time already, but still fail. I think because the usb debugging mode was not enable at the first place.
Thank anyway.
Click to expand...
Click to collapse
Usb debugging has nothing to do with it failing when you're using odin. Try a different version of odin.
A simple reflash via Odin 1.85 or 3.07/3.04 will fix it.
boycam said:
I have just bricked my newly-bought Note 3 (N900).
I wanted to flash the latest version of Note 3 via Odin 3.08 (from 4.3 to 4.4.2). I made a big mistake as I didn't enable the "USB DEBUGGING" mode before go to download mode.
I clicked start in Odin and it show FAIL!!!
After I restart the phone all I see on the screen is the message "Firmware upgrade encountered an issue Please select recovery mode in Kies & try again."
I tried to recover it through Kies, but the it shows the phone is not connected or not support. Meaning the Kies cannot communicate with the phone at all.
I also tries to flash in Odin many times, but it still fails.
Please!!! Can anyone here give me some solution.
Thanks.
Click to expand...
Click to collapse
USB Debugging has nothing to do with odin flash, make sure while flashing below steps.
1. Update boot loader is selected in odin.(Edit:for single file not required)
2. Disable antivirus.
3. make sure note 3 drivers are installed.
4. kies not running in bag round.
5.Clear Factory Data & Catch before flash.
if all of those step fail..
try to flash ur rom on other computer or laptop
Sent from my SM-N900 using XDA Premium 4 mobile app
radicalisto said:
A simple reflash via Odin 1.85 or 3.07/3.04 will fix it.
Click to expand...
Click to collapse
Thankx man itis worked:good::good:
jdomadia said:
USB Debugging has nothing to do with odin flash, make sure while flashing below steps.
1. Update boot loader is selected in odin.(Edit:for single file not required)
2. Disable antivirus.
3. make sure note 3 drivers are installed.
4. kies not running in bag round.
5.Clear Factory Data & Catch before flash.
Click to expand...
Click to collapse
tried flashin with diff odin versions, was not working, tried ver 1.85, cause it lets you select update boot loader.......and BAM,,it worked on my tmobile tab 4, now i c.an wipe the tears off the key board, thanks, didnt do # 5 tho, was rooting the tab with cf auto.
markap99 said:
tried flashin with diff odin versions, was not working, tried ver 1.85, cause it lets you select update boot loader.......and BAM,,it worked on my tmobile tab 4, now i c.an wipe the tears off the key board, thanks, didnt do # 5 tho, was rooting the tab with cf auto.
Click to expand...
Click to collapse
You've indeed saved my day... I've been searching high and low, installing various versions of Odin3, downloading tonnes of tar, tarmd5, zip, etc.!
Pardon me for my ignorance, but I never intended to root my cell phone in the first place. I was merely following what Kies suggested, "A New Firmware, Wanna Upgrade?" Oh, truly? Gee, thanks! And **** it, it screwed up my GT-N7000, saying "Firmware upgrade encountered an issue..." and my cell phone never saw the daylight again, regardless how I started it, factory-reset mode wasn't possible at all, only download mode could be started up. Tried with various methods of Odin3 on multiple ROMS, to no avail, until I read your short reply. BAM! (As you put it...)
Thanks a bunch, mate!
I have a similar issue with my sm n900. Lost my imei and baseband, i needed to flash a custom rom to get my baseband before working on the imei, after flashing via odin phone boots to samsung logo then goes blank. And recovery says E failed to mount efs . But i need to use adb on my pc. So how can i possibly enabe usb debugging in order for adb to find my device?
Flashing a stock ROM from sammobile.com via Odin does not require USB debugging. Flashing a stock ROM will flash everything, including modem, bootloader, and recovery.
My N900 Bricked
I am unable to Go to download mode not even the charging symbol too
no Luck at all phone is not starting need a Unbrick or help me how to get it sorted
galaxy Note 3 Sm N900
Tried to open the phone to short the wire but the shorting mentioned in all the imagees doesnt match the design of the phone internal
can some one tell me which points to short to start the phoen in Ext sd mode
or any help would help

[HELP] I9505 network signal problem

Hi, im from peru, recently bought a cell phone model: Samsung S4 I9505 Factory Unlocked (AP:i9505xxuemk8 Modem: i9505xxuamdc CSC: i9505btuemk5) Android 4.3; the phone recognizes my network operator (movistar) without problems but when the phone goes into "deep sleep" mode and i turn on, it loses signal (check images) and the signal returns after a few seconds (or minuts), only GSM Netwotk Mode works fine, please be patient with me, because i'm newbie, thank you.
Run4silver said:
Hi, im from peru, recently bought a cell phone model: Samsung S4 I9505 Factory Unlocked (AP:i9505xxuemk8 Modem: i9505xxuamdc CSC: i9505btuemk5) Android 4.3; the phone recognizes my network operator (movistar) without problems but when the phone goes into "deep sleep" mode and i turn on, it loses signal (check images) and the signal returns after a few seconds (or minuts), only GSM Netwotk Mode works fine, please be patient with me, because i'm newbie, thank you.
Click to expand...
Click to collapse
All is ok less the modem. You will have to download and extract this MODEM. How?
1. Download ODIN and start it as administrator.
2. Now open the windows taskmaster. End all "Kies" processes.
3. In Odin untick "Auto reboot"
4. For the bootloader select BL and browse to your bootloader file.
5. For the modem select CP/PHONE and browse to your modem file.
The next step is VERY IMPORTANT
6. Power off your phone
7. Start your phone into download mode by holding Home button + Vol down + Power button. Volume Up then (PIC 1)
8. Once your phone is in download mode, connect it to your PC. (Best results always with your original Samsung USB cable)
-Odin should say "Added" now.
9. Press the Start button in Odin and let it do it's magic. Wait. (PIC 2)
10. When Odin shows "PASS" you can unplug your phone.
IMPORTANT: WAIT UNTIL YOU SEE "PASS" DO NOT UNPLUG THE PHONE BEFORE!
11. When you have unplugged your phone, it is still in download mode. Just hold the power button about 8 seconds until your phone reboots.
DONE
Go to Settings/More/About device. There you will see your new baseband.
12. Do this process one time more if u still seeing the old modem/baseband.
Joku1981 thank you for ur help, i installed the modem and now everything works fine!!! thank you very much!!!
after installing the modem, i have received the message to update to android 4.4.2, I'm very happy
Run4silver said:
Joku1981 thank you for ur help, i installed the modem and now everything works fine!!! thank you very much!!!
after installing the modem, i have received the message to update to android 4.4.2, I'm very happy
Click to expand...
Click to collapse
Hi. I have the same device and the same firmware and, unfortunately, the same problem
Can i flash this modem by Odin on my device NO-rooted ?
Thank you in advance
ps: Hola PerĂ¹
FerrarisIV said:
Hi. I have the same device and the same firmware and, unfortunately, the same problem
Can i flash this modem by Odin on my device NO-rooted ?
Thank you in advance
ps: Hola PerĂ¹
Click to expand...
Click to collapse
Flash modem can void ur warranty. Flash a second time the same firmware u are using through ODIN for rewrite the baseband and no void ur warranty :highfive:. It should works
Joku1981 said:
Flash modem can void ur warranty. Flash a second time the same firmware u are using through ODIN for rewrite the baseband and no void ur warranty :highfive:. It should works
Click to expand...
Click to collapse
Thanks for your reply. I will able to try only next week because the device is not mine...
nice week end

I can't go into recovery mode.

Ok first of all i really need help !
I tried to root my Samsung galaxy S5 SM-G901F from Singapore (Singtel) and I went on androidxda for my phone and download everything and did step by step but when I press start , halfway it said failed and it said Firmware upgrade encountered an issue.Please select recovery mde in Kies and try again. I tried to go to recovery mode but to no avail and Kies doesnt detect my phone. PLEASE HELP ME !!
the only thing i can hope now is to download the firmware for my phone and telco and try to use odin and load is it guys? Please help me, i really need to fix this.
can someone help me ? now that i downoaded the firmware when it's checking the md5 , the odin stops responding. PLEASE HELP ME...
fitris97 said:
can someone help me ? now that i downoaded the firmware when it's checking the md5 , the odin stops responding. PLEASE HELP ME...
Click to expand...
Click to collapse
If you have not already tried this then turn off the phone and pull the battery out and leave it out for a few minutes.
Put the battery back in and try to boot the phone normally, if that fails then pull the battery again and leave it as before then follow the below process.
Put the battery back in and boot the phone into download mode
Start Odin and find the md5 file under PDA
Let Odin run the file check
Once Odin has done the check connect your phone to your PC (don't connect your phone before this step) and wait for the ID com to highlight usually in blue
Once highlighted click Start and the firmware should flash onto your phone.
ag4751 said:
If you have not already tried this then turn off the phone and pull the battery out and leave it out for a few minutes.
Put the battery back in and try to boot the phone normally, if that fails then pull the battery again and leave it as before then follow the below process.
Put the battery back in and boot the phone into download mode
Start Odin and find the md5 file under PDA
Let Odin run the file check
Once Odin has done the check connect your phone to your PC (don't connect your phone before this step) and wait for the ID com to highlight usually in blue
Once highlighted click Start and the firmware should flash onto your phone.
Click to expand...
Click to collapse
Oh my god !! I can't never thank you enough !! It finally worked and it started flashing the firmware.All is good now , thank you !!

Stuck at Samsung Note 4 Logo

hello friends,
i tried to update my Note 4 (N910c) but it is now boot looping and i couldn't fix it. i tried to get into recovery but it is not. only odin mode. i flashed stock, cwm and twrp recoveries too. but non of them are working. but for the firmware i don't know the region of the phone, i bought it from ebay and it came from dubai. i really need help guys. i have tried all i know and non of it helped.
thanks
nemo0002253 said:
hello friends,
i tried to update my Note 4 (N910c) but it is now boot looping and i couldn't fix it. i tried to get into recovery but it is not. only odin mode. i flashed stock, cwm and twrp recoveries too. but non of them are working. but for the firmware i don't know the region of the phone, i bought it from ebay and it came from dubai. i really need help guys. i have tried all i know and non of it helped.
thanks
Click to expand...
Click to collapse
Download this all samsung recovery and flash via odin. Helped for me with bootloop.
https://www.dropbox.com/s/c3byn50jvboo7nv/All samsung recovery.tar?dl=0
Thank you @dewingerd for your reply.
I have tried the recovery and it is still stuck at the logo.
nemo0002253 said:
Thank you @dewingerd for your reply.
I have tried the recovery and it is still stuck at the logo.
Click to expand...
Click to collapse
Install the latest verson of kies on you computer.
Then in kies under "Tools" choose "firmware upgrade and initialisation".
Then give you model number "SM-N910?", next give serial number of the phone (you can find that on the sticker behind the battery in your phone).
Then you get a message that the "device can be initialised to its original setting"
Press ok and ok again. Then put your phone in download mode and connect to the computer and press "start upgrade".
Not working @dewingerd
Kies doesnt detect my phone. Bt drivers are installed correctly. It only opens in downloading mode
nemo0002253 said:
Not working @dewingerd
Kies doesnt detect my phone. Bt drivers are installed correctly. It only opens in downloading mode
Click to expand...
Click to collapse
Happened to me also 2 days ago.
Your mobile only can enter download mode ? but when u try to go to recovery or just power it , nothing happened , right ??
Well , you should do as @dewingerd said carefully do these steps :
Initially you need to upgrade kies to the latest version (mine is : 3.2.15072_2) or this will fail cuz it failed with me the first time.
1) take of your battery , and write down your Serial number .
2) open kies first.
3) open mobile in download mode then connect it . KIES WILL NOT RECOGNIZE THE MOBILE
4) Choose : Tools >> Firmware upgrade and initialisation
5) Kies will ask you about your mobile name , TYPE : SM-N910C , ALL CAPITAL LETTERS OR KIES WILL NOT RECOGNIZE IT
6) if you did not type the name correctly , you will get a message that kies does not know this name , so start again , type SM-N910C
7) then you will get another box asks for your serial number , enter it (Not case sensitive).
8) Kies then will inform you that it is going to prepare the phone and download the firmware for your device and that you have to connect it in download mode.
9) unplug your mobile , plug it again and click start.
10) Now the process is going to take a while depending on your internet connection (downloading about 2GB), do not unplug the phone and do not allow your laptop/PC to sleep.
11) cautions that I read before : you better not connect or disable any usb devices during the process.
12) suddenly , you will hear you mobile starting up again , congratulations
Q: What about my data , apps and stuff ?
A: All is gone except for those on your External card , sorry , nothing can be done for that (May be you should remove your SDcard first just in case).
Good Luck
APCOtech said:
Well , do as @dewingerd said
Initially you need to upgrade kies to the latest version (mine is : 3.2.15072_2) or this will fail cuz it failed with me the first time.
1) take of your battery , and write down your Serial number .
2) open kies first.
3) open mobile in download mode then connect it . KIES WILL NOT RECOGNIZE THE MOBILE
4) Choose : Tools >> Firmware upgrade and initialisation
5) Kies will ask you about your mobile name , TYPE : SM-N910C , ALL CAPITAL LETTERS OR KIES WILL NOT RECOGNIZE IT
6) if you did not type the name correctly , you will get a message that kies does not know this name , so start again , type SM-N910C
7) then you will get another box asks for your serial number , enter it (Not case sensitive).
8) Kies then will inform you that it is going to prepare the phone and download the firmware for your device and that you have to connect it in download mode.
9) unplug your mobile , plug it again and click start.
10) Now the process is going to take a while depending on your internet connection (downloading about 2GB), do not unplug the phone and do not allow your laptop/PC to sleep.
11) cautions that I read before : you better not connect or disable any usb devices during the process.
12) suddenly , you will hear you mobile starting up again , congratulations
Q: What about my data , apps and stuff ?
A: All is gone except for those on your External card , sorry , nothing can be done for that (May be you should remove your SDcard first just in case).
Good Luck
Click to expand...
Click to collapse
I have done all you have stated here and still end up on the Samsung boot logo, i have flash a stock firmware from sammobile and my note 4 still ends up on the Samsung boot animation logo
please help i don't know what else to do
Ify2gen2 said:
I have done all you have stated here and still end up on the Samsung boot logo, i have flash a stock firmware from sammobile and my note 4 still ends up on the Samsung boot animation logo
please help i don't know what else to do
Click to expand...
Click to collapse
Now , this is another case , as long as you can press power and the mobile starts up , showing the first logo , and next the animation , then this is no big problem .
just first tell me what is your note4 variant ? C F H ? can you root and install recovery ?
What happened to your mobile and resulted this ?
APCOtech said:
Now , this is another case , as long as you can press power and the mobile starts up , showing the first logo , and next the animation , then this is no big problem .
just first tell me what is your note4 variant ? C F H ? can you root and install recovery ?
What happened to your mobile and resulted this ?
Click to expand...
Click to collapse
thank for your quick reply, my variant is n910c ans yes i can still install recovery. I upgraded from 5.0.1 to 5.1.1 poland using odin and everything works well. I flashed Googy N4 kernel using TWRP 2.8.1.1 and everything still works well. My problem began when I made a backup of my 5.1.1 stock rom and flash infinity rom which end up in bootloop. So I tried restoring my backup but whenever it got to DATA RESTORING it keeps failing and flashing back the 5.1.1 poland stock firmware through odin keeps ending up on the SAMSUNG boot animation screen.
Ify2gen2 said:
thank for your quick reply, my variant is n910c ans yes i can still install recovery. I upgraded from 5.0.1 to 5.1.1 poland using odin and everything works well. I flashed Googy N4 kernel using TWRP 2.8.1.1 and everything still works well. My problem began when I made a backup of my 5.1.1 stock rom and flash infinity rom which end up in bootloop. So I tried restoring my backup but whenever it got to DATA RESTORING it keeps failing and flashing back the 5.1.1 poland stock firmware through odin keeps ending up on the SAMSUNG boot animation screen.
Click to expand...
Click to collapse
which version of googy kernel ?
Well whatever , TWRP 2.8.1.1 won't work with 5.1.1 bootloader , try TWRP 2.8.7.0
APCOtech said:
which version of googy kernel ?
Well whatever , TWRP 2.8.1.1 won't work with 5.1.1 bootloader , try TWRP 2.8.7.0
Click to expand...
Click to collapse
GoogyMax N4 v2.0. I have tried TWRP 2.8.7.0 but still the same.
After flashing stock firmware using odin, on my stock recovery i found this error
"E:failed to mount /efs (invalid argument)
dm-verity verification failed.......
need to check drk first......."
I have search through the internet but i can't get a clear picture of what it meant.
Does anyone has an idea of what it meant and how to resolve the error?
Ify2gen2 said:
GoogyMax N4 v2.0. I have tried TWRP 2.8.7.0 but still the same.
After flashing stock firmware using odin, on my stock recovery i found this error
"E:failed to mount /efs (invalid argument)
dm-verity verification failed.......
need to check drk first......."
I have search through the internet but i can't get a clear picture of what it meant.
Does anyone has an idea of what it meant and how to resolve the error?
Click to expand...
Click to collapse
Hi again ,
Looks like a locked phone and was unlocked in a wrong way or something like that.
read this thread , looks like the same problem.
in short , you need the 4 files firmware to be flashed via oden and as stated in page 2 there , you flash them without pit file.
You can find the 4-files firmware here but this is not 5.1.1 firmware , give it a try , if failed too , search for 5.1.1 4-files firmware.
here is another site but I do not really know if they are 4-files or the single file .
Good luck.
APCOtech said:
Hi again ,
Looks like a locked phone and was unlocked in a wrong way or something like that.
read this thread , looks like the same problem.
in short , you need the 4 files firmware to be flashed via oden and as stated in page 2 there , you flash them without pit file.
You can find the 4-files firmware here but this is not 5.1.1 firmware , give it a try , if failed too , search for 5.1.1 4-files firmware.
here is another site but I do not really know if they are 4-files or the single file .
Good luck.
Click to expand...
Click to collapse
thanks i will give a try and post my feedback
APCOtech said:
Hi again ,
Looks like a locked phone and was unlocked in a wrong way or something like that.
read this thread , looks like the same problem.
in short , you need the 4 files firmware to be flashed via oden and as stated in page 2 there , you flash them without pit file.
You can find the 4-files firmware here but this is not 5.1.1 firmware , give it a try , if failed too , search for 5.1.1 4-files firmware.
here is another site but I do not really know if they are 4-files or the single file .
Good luck.
Click to expand...
Click to collapse
All methods on the links you pasted didn't work, however i have been able to resolve it using this method from this link below
http://www.youtube.com/watch?v=HVOOwZs-kwQ
thanks for your support and help.
Ify2gen2 said:
All methods on the links you pasted didn't work, however i have been able to resolve it using this method from this link below
http://www.youtube.com/watch?v=HVOOwZs-kwQ
thanks for your support and help.
Click to expand...
Click to collapse
You are welcome , what matters is your phone is back
APCOtech said:
You are welcome , what matters is your phone is back
Click to expand...
Click to collapse
yes my phone is back but not fully back. I am having a bad IMEI, phone is not registering on network and i have mistakenly delected my EFS backup........my bad!
Can i get a working EFS backup of the same phone model (n910c) and restore it on my note 4 n910c? will it restore back my IMEI?
APCOtech said:
Well , you should do as @dewingerd said carefully do these steps :
Initially you need to upgrade kies to the latest version (mine is : 3.2.15072_2) or this will fail cuz it failed with me the first time.
1) take of your battery , and write down your Serial number .
2) open kies first.
3) open mobile in download mode then connect it . KIES WILL NOT RECOGNIZE THE MOBILE
4) Choose : Tools >> Firmware upgrade and initialisation
5) Kies will ask you about your mobile name , TYPE : SM-N910C , ALL CAPITAL LETTERS OR KIES WILL NOT RECOGNIZE IT
6) if you did not type the name correctly , you will get a message that kies does not know this name , so start again , type SM-N910C
7) then you will get another box asks for your serial number , enter it (Not case sensitive).
8) Kies then will inform you that it is going to prepare the phone and download the firmware for your device and that you have to connect it in download mode.
9) unplug your mobile , plug it again and click start.
10) Now the process is going to take a while depending on your internet connection (downloading about 2GB), do not unplug the phone and do not allow your laptop/PC to sleep.
11) cautions that I read before : you better not connect or disable any usb devices during the process.
12) suddenly , you will hear you mobile starting up again , congratulations
Q: What about my data , apps and stuff ?
A: All is gone except for those on your External card , sorry , nothing can be done for that (May be you should remove your SDcard first just in case).
Good Luck
Click to expand...
Click to collapse
Hi APCOtech im trying to solve mine too.. But my device not suppotred with kies3.. Any suggestion?? My device SM-N910S
Thanks man.
vzaen said:
Hi APCOtech im trying to solve mine too.. But my device not suppotred with kies3.. Any suggestion?? My device SM-N910S
Thanks man.
Click to expand...
Click to collapse
Try to download the appropriate firmware with Samfirm_reborn0.3.6.2 you'll find on Github. Unpack the .zip and start as admin.
Insert full device name and region and additionally check "binary nature" box.
It should download the latest! ROM multiple file format from Samsungs servers directly, at least it did for all my 7 devices (just in case) before I rooted them.
BUT I know that for N910V nothing is found and don't know about S model.
KIES I never used as I read it sometimes conflicts with Odin.
If files are downloaded flash with Odin adding the different files in their input fields. (selve explaining names)

HELP !! My Note 4 (SM-N910F) Bricked After Official Marshmallow Update !!

Hi
I have this Samsung Galaxy Note 4 (SM N910F). I am here in Pakistan. I purchased my Note 4 from UK and Its on EE. I was using it here and it got an Official OTA Update of Marshmallow which I installed. After a couple of days, my phone automatically got bricked. I contacted a local mobile repairing shop who dumped some other unbranded international firmware which changed its CSC too [CSC after updating unbranded firmware = (N910FOXX1COH1)]. The firmware was not working properly and had glitches.
Now i want to flash its stock EE Firmware which i have downloaded. I tried to flash it with ODIN but then i noticed that the CSC was changed so i tried to change the CSC by rooting the phone and for that i reboot the phone in Download Mode. The phone usually goes to black screen and does not start after proper power off and I need to soft reset it (By pulling the battery and draining battery charges) in order to turn it on everytime. After a couple of restarts in this way, the phone finally stopped to turn on. In download mode i had an error of "PIT File not found" while i tried to root it through ODIN. I tried to normal boot the phone but now it doesnt boot at all.
I need to boot it so that i may change my CSC to flash my stock firmware (please tell me if changing CSC would be necessary, Current CSC = N910FOXX1COH1,
Required CSC = N910FEVR1DPE1)
Any help would be appreciated. Thanks
Try to flash your EE rom with pit file for note 4 910f.
http://forum.xda-developers.com/not...te-4-pit-files-repartiton-f-g-c-t-w8-t3282641
Chamaka said:
Try to flash your EE rom with pit file for note 4 910f.
http://forum.xda-developers.com/not...te-4-pit-files-repartiton-f-g-c-t-w8-t3282641
Click to expand...
Click to collapse
Thanks for the reply !
Is it necessary to change the csc to UK region before flashing the UK firmware ? My phone is not booting to download mode either right now. Earlier today it was booting infact i tried to exit from download mode 2 times by pulling the battery but every time it automatically reboot to download mode. That was the moment when i shut down the phone by pressing home + power and after that it doesnt turn on
UK firmware includes UK csc. Then you don't need to change it manually.
But if your phone won't turn on I don't know how to recover it. (try to Recharge your phone and then go to download mode. I think your battery is fully discharged. )
If you can able to access download mode, flash firmware with the pit file using Odin.
Chamaka said:
UK firmware includes UK csc. Then you don't need to change it manually.
But if your phone won't turn on I don't know how to recover it. (try to Recharge your phone and then go to download mode. I think your battery is fully discharged. )
If you can able to access download mode, flash firmware with the pit file using Odin.
Click to expand...
Click to collapse
Thanks for the reply. I am trying to arrange another note 4 through which i can charge the battery. Ill give this idea a try and will let you know ! Thanks
I charged the battery but still the phone wont turn on
I think i have fried the boot loader !
Ma note 4 wont turning on and showing connect hs usb qdloader 9008 no flahing not charging want help please help

Categories

Resources