Greetings gentlemen, well .. I suppose I want to install cm 14.1 unofficial on my OP2 A2005 but it happens that when I enter twrp as usual and perform all the previous steps and install the ROM as it gives me "error 7 and bla bla bla" I looked on the internet how to solve this but to do it and try again it gave me "error 4 bla bla".
I also read that installing a previous version of OOS (specifically 2.2.1) would be solved, tried and do not know what happened? Nothing, I still can not change the stock rom. Someone who happened to be similar and could have solved this situation? I really want to be able to change any rom
Twrp > mount > check System
Sent from my ONE A2003 using Tapatalk
sudhakarstoopy said:
Twrp > mount > check System
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
Tested but still not working
1)back up all your data to pc and try wiping everything(include internal storage) after that try to install recovery from fastboot and then try install whatever rom(oxygen for example)
2)or just delete twrp folder on internal storage and try if it helps
Flash oneplus2 oxygen 3.0 beta then flash latest TWRP then new rom that you want to use. That's what helped me fix the same problem.
Sent from my ONE A2005 using Tapatalk
Hello masters , There was issues with boot loop in my OP2, I got it fixed with OP Tech support help, they took control of my laptop installed Certificates and then flashed the latest version of OOS3.X.x
I unlocked the boot loader - successfully
Went to TWRP official site and downloaded the latest TWRP for OP2 and flashed via fastboot - successfully flashed , however I am unable to get into TWRP Recovery. It takes to the OP stock recovery. HELP if anyone has faced this issue before.
chxei said:
1)back up all your data to pc and try wiping everything(include internal storage) after that try to install recovery from fastboot and then try install whatever rom(oxygen for example)
2)or just delete twrp folder on internal storage and try if it helps
Click to expand...
Click to collapse
Tested, but.. nothing! :l
knucklehead_11 said:
Flash oneplus2 oxygen 3.0 beta then flash latest TWRP then new rom that you want to use. That's what helped me fix the same problem.
Sent from my ONE A2005 using Tapatalk
Click to expand...
Click to collapse
Just I do it, even try Flashfire but does not work
runnig out of ideas... try installing cyanogenmod recovery
Sent from my oneplus 2 using Tapatalk
Related
1) Used the toolKit to unlock Bootloader
2) install twrp using Toolkit
3) transfered AOKP rom to device using airdroid
4) Went to TWRP, System Wipe 3 times, Clear cache 3 times
5) attempt to flash AOKP ZIP
6) ZIP failed to install no idea why
7) Tried to restart and now stuck at the GOOGLE logo
Please help is there anything i can do?
Hmm could i use the toolkit to flash an img file? Im dling a stock img atm.
First off.. Don't panic ... It wasn't your fault it failed ... I know because it happened to me . don't get it from "downloads" or goomanager .. Get it from the second post I. That thread on the latest date
Second . I don't think otg works in twrp so you will have to use adb to load the ROM
Sent from my Nexus 4 using Tapatalk 2
italia0101 said:
First off.. Don't panic ... It wasn't your fault it failed ... I know because it happened to me . don't get it from "downloads" or goomanager .. Get it from the second post I. That thread on the latest date
Second . I don't think otg works in twrp so you will have to use adb to load the ROM
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
I did get it from the second post though, and how can i load into ADB?
italia0101 said:
Second . I don't think otg works in twrp so you will have to use adb to load the ROM
Click to expand...
Click to collapse
OTG does work in TWRP. I have found that it doesn't like some flash drives - no idea why. I've tried quite a few, some of mine work all the time, other just won't work.
adoute said:
OTG does work in TWRP. I have found that it doesn't like some flash drives - no idea why. I've tried quite a few, some of mine work all the time, other just won't work.
Click to expand...
Click to collapse
Ok went to twrp and used the ADB sideload feature but it said OTG cable fail to mount.
FIXED
WOOO FIXED IT NVM! Mod please delete thanks for help guys
Someone with more experience correct me if I'm wrong, but shouldn't we be avoiding wiping system in TWRP prior to flashing ROMs? I believe I read a thread (probably on RootzWiki) that said wiping system messes things up as you lose the ability to flash a ROM in the "traditional" manner. I wipe cache, dalvik, then click factory reset. I leave system alone and I've never had a problem with flashing ROMs.
Okay Idk what's going on exactly but I've tried downloading sacs custom 7.2 several times md5s all check out and when I go to flash it in twrp 2.6.3 it fails same with twrp 2.5.2.zip they both keep failing. However I was recently able to flash miuiv5 after a download so the recovery is still working (also it restores backups fine)... So. I'm wondering what's going on here they aren't bad files and it just won't flash! Does this rom have that aroma installer? Am I missing something that allows that?
Currently running trifforce 3.1 with agat kernel and twrp 2.63
Sent from my SPH-L720 using XDA Premium 4 mobile app
coke32 said:
Okay Idk what's going on exactly but I've tried downloading sacs custom 7.2 several times md5s all check out and when I go to flash it in twrp 2.6.3 it fails same with twrp 2.5.2.zip they both keep failing. However I was recently able to flash miuiv5 after a download so the recovery is still working (also it restores backups fine)... So. I'm wondering what's going on here they aren't bad files and it just won't flash! Does this rom have that aroma installer? Am I missing something that allows that?
Currently running trifforce 3.1 with agat kernel and twrp 2.63
Sent from my SPH-L720 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It could be a product assert. If the TWRP is not made for t0ltespr (Sprint Note II) or ROM isn't made for that the two could be trying to verify the wrong model against each other and failing. You can remove this from the zip by looking for the assert in update-script.
Another option if you're open to it is to try my unofficial CWM and see if that avoids your issue.
Good luck!
rom help
In order for it to work, you need to flash sach's custom rom version 7.0. Let it do a full install and setup, then boot back into recovery. Then flash the 7.1 or 7.2 update. Hope this helps.
---------- Post added at 09:50 AM ---------- Previous post was at 09:45 AM ----------
Do Not, I repeat DO NOT do a system wipe in TWRP after installing 7.0 or 7.1. Let the aroma installer do the wipe. I learned the hard way, I wiped it myself and went to update to 7.2 and got nothing but failure notices. Once I re-flashed 7.1 and let the aroma installer do the wipe, it installed with no problem
ive always done a system wipe with no problems. be sure you are downloading the full rom and not the update. and make sure your downloading from a pc over a good wifi conection, then i make sure the file size is about the same size before transferring and flashing. hope this helps
coke32 said:
Okay Idk what's going on exactly but I've tried downloading sacs custom 7.2 several times md5s all check out and when I go to flash it in twrp 2.6.3 it fails same with twrp 2.5.2.zip they both keep failing. However I was recently able to flash miuiv5 after a download so the recovery is still working (also it restores backups fine)... So. I'm wondering what's going on here they aren't bad files and it just won't flash! Does this rom have that aroma installer? Am I missing something that allows that?
Currently running trifforce 3.1 with agat kernel and twrp 2.63
Sent from my SPH-L720 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
After wiping system,caches,data in Twrp advanced wiped are you getting the fail? if so just reboot recovery and try to install again without wiping. I have had the flash fail for me too and a recovery reboot solved the issue for me. Also in aroma don't factory reset wipe just wipe cache and dalvik. Also I am on TWRP 2.6.3.1
Sent from my SPH-L720 using Tapatalk 2
good morning everybody,
I am a D802 user, and I have rooted it, installed TWRP last build and wanted to install the slimkat ROM
but, I don't know why, but first I didn't perform a backup, and secondly instead of performing the system wipe, I,ve been in advanced mode and decided to wipe the internal data :silly:
and of course, now I can,t find my zip file for the nex ROM, and when I reboot I am blocked on LG logo screen, I can enter in recovery or download mode, that's all !!!
is there any other solution that flashing the stock ROM (.kdz) to solve my problem ??
many thx !!
G. :good:
geobart said:
good morning everybody,
I am a D802 user, and I have rooted it, installed TWRP last build and wanted to install the slimkat ROM
but, I don't know why, but first I didn't perform a backup, and secondly instead of performing the system wipe, I,ve been in advanced mode and decided to wipe the internal data :silly:
and of course, now I can,t find my zip file for the nex ROM, and when I reboot I am blocked on LG logo screen, I can enter in recovery or download mode, that's all !!!
is there any other solution that flashing the stock ROM (.kdz) to solve my problem ??
many thx !!
G. :good:
Click to expand...
Click to collapse
Have you tried connecting thru usb to computer and then mount sd card and transfer a zip then?
Sent from my LG-D801 using Tapatalk
Just do adb sideload
Sent from my LG-G2 using Tapatalk
/rawda : when I put USB cable, nothing happens on my computer !!! so what should I do to mount SD card ?
/darkobas : what do you mean with "do adb sideload" ? i need to be connected with USB, because I thought I try this menu but nothing change, but maybe I forgott something !
many thx guys
geobart said:
/rawda : when I put USB cable, nothing happens on my computer !!! so what should I do to mount SD card ?
/darkobas : what do you mean with "do adb sideload" ? i need to be connected with USB, because I thought I try this menu but nothing change, but maybe I forgott something !
many thx guys
Click to expand...
Click to collapse
Can you boot into recovery? Or download mode?
RubbleTea said:
Can you boot into recovery? Or download mode?
Click to expand...
Click to collapse
Yes, I can boot in both mode recovery and download, that's the only thing I can do at this time !!!!! :laugh:
geobart said:
Yes, I can boot in both mode recovery and download, that's the only thing I can do at this time !!!!! :laugh:
Click to expand...
Click to collapse
Cool, so if you install adb onto your PC and set it up you can sideload a ROM to your recovery....and if you want you can flash stock in download mode with thread in general forum....I'm hitting the sack but if you look up adb sideload you should be able to get all the instructions
---------- Post added at 01:48 AM ---------- Previous post was at 01:46 AM ----------
Basically once you have adb setup and have a ROM ready its a piece of cake and lots of threads if you Google it
I think I will have a problem with ADB, because before flashing I disable the USB debugging mode !!!! and unfortunatly I can't enable it !! Am I true ???
geobart said:
I think I will have a problem with ADB, because before flashing I disable the USB debugging mode !!!! and unfortunatly I can't enable it !! Am I true ???
Click to expand...
Click to collapse
No youll still ne able to do it in recovery
Sent from my LG-D801 using Tapatalk
look into your recovery settings, it should have an adb option you can togle, otherwise let it go in booting loop.
navigate to the folder with the files you rooted with. There should be a adb file.
then shift rightclick if windows on that folder that contains that stuff. Select command prompt from here.
adb devices,
or adb it will or should list the phone, then find the codes to push the desired rom and optional apps to root\sdcard.
then adb reboot recovery, or reboot manually into recovery and flash your rom plus optional gapps
Sent from my LG-D802 using xda app-developers app
adb didn't work, can't recognize my device with qdb devices command !!
anyway, I flash the stock rom in Download mode and then root, TWRP and custom Rom and everything is good now !!
thx for all
darkobas said:
Just do adb sideload
Sent from my LG-G2 using Tapatalk
Click to expand...
Click to collapse
hi , if you can help me please help !!
i have rooted my g2 and installed twrp recovery
then i tried to flash cm 11
it started flashing then it says "fail"
i tried to reboot my phone
it get stuck on lg screen
then someone fixed it for me
i tried to flash PA rom it failed what i can do to flash the rom on my phone
majdifa said:
hi , if you can help me please help !!
i have rooted my g2 and installed twrp recovery
then i tried to flash cm 11
it started flashing then it says "fail"
i tried to reboot my phone
it get stuck on lg screen
then someone fixed it for me
i tried to flash PA rom it failed what i can do to flash the rom on my phone
Click to expand...
Click to collapse
Im guessing your recovery is 2.6.3.2 you need twrp 2.6.3.3 to flash cm11
Sent from my LG-LS980 using xda premium
mchlbenner said:
Im guessing your recovery is 2.6.3.2 you need twrp 2.6.3.3 to flash cm11
Sent from my LG-LS980 using xda premium
Click to expand...
Click to collapse
Thank you a lot
But I've got another problem,
I Installed TWRP 2.6.3.3
Then I downloaded CM 11 and g apps
Then I rebooted my phone into recovery
I have made back up
And then i wiped dalvik cache and cache
Then i have flashed CM 11 and google apps there was no "fails" or errors
But when installing the zip finished
I rebooted my phone the phone get stuck on CM logo ??
majdifa said:
Thank you a lot
But I've got another problem,
I Installed TWRP 2.6.3.3
Then I downloaded CM 11 and g apps
Then I rebooted my phone into recovery
I have made back up
And then i wiped dalvik cache and cache
Then i have flashed CM 11 and google apps there was no "fails" or errors
But when installing the zip finished
I rebooted my phone the phone get stuck on CM logo ??
Click to expand...
Click to collapse
Whipe system data and data then reboot.
Dont ever whipe internal data.
Sent from my LG-LS980 using xda premium
I just want to share my experience after a bad flash and no way to recover.
I was still able to get to TWRP. I had flashed a Rom and it went bad. Long story short. No Loki causing boot into fastboot screen.
Tried using flash tools to restore stock with kdz. No good kept stopping at 49% because it was not the expected firmware.
The fix.
Wipe system in recovery then try again. With system wiped. The firmware matches and installs as expected.
Just wanted to share my experience. Maybe it will help someone else with the same problem.
Brian
Sent from my LG-D801 using Tapatalk
THANK YOU!!
I registered specifically so I could post here.
I was looking for ages trying to find a fix. Always getting stuck at that 49%. Back to normal now!
Thanks alot
cambuchan said:
I registered specifically so I could post here.
I was looking for ages trying to find a fix. Always getting stuck at that 49%. Back to normal now!
Thanks alot
Click to expand...
Click to collapse
Glad it was if help for you!
Sent from my LG-D801 using Tapatalk
What fixed it for my friend was "format data," as in internal storage as well.
Thank you!
h
cheami said:
What fixed it for my friend was "format data," as in internal storage as well.
Thank you!
Click to expand...
Click to collapse
Hi, sorry for my english , I'm french
I wanted to flash a custom rom on my LG G2 D802 .
I wanted the Paranoid Android (PA +) with 4.3 JellyBean .
So I made the
Backup
Wipe data / factory reset
Wipe cache partition
Wipe dalvik Cache
After I
Choose zip ( custom ROM ) from sd card
Then I
Reboot System Now
And turn on my laptop, I get an error message saying
[640 ] started Fastboot Mode
[ 690] udc start ()
I realized I had to flash AOSP kernel before changing to a ROM paranoid . But my kernel is blocked and so I have to go back to the stock ROM
When I did this tutorial using lg tools , flashing stops at 49% with an error message .
I also saw that I could access the recovery mod by following this link http://forum.xda-developers.com/showthread.php?t=2565904(but I saw that I could not otherwise reboot my phone after it was bricking ) and therefore flash my stock Rom which I had made the backup . But I do not know if the ROM has been saved and if it remained in my files after the Wipes.
If it is not there, is that in buying a micro USB ====> HUSB adapter, I could install a stock ROM from a USB key ? Or is there a way I can put files from my computer to my laptop which has no port micro sd?
And is what I could with my kernel "blocked " ?
Thank you very much
harryleplusfort said:
Hi, sorry for my english , I'm french
I wanted to flash a custom rom on my LG G2 D802 .
I wanted the Paranoid Android (PA +) with 4.3 JellyBean .
So I made the
Backup
Wipe data / factory reset
Wipe cache partition
Wipe dalvik Cache
After I
Choose zip ( custom ROM ) from sd card
Then I
Reboot System Now
And turn on my laptop, I get an error message saying
[640 ] started Fastboot Mode
[ 690] udc start ()
I realized I had to flash AOSP kernel before changing to a ROM paranoid . But my kernel is blocked and so I have to go back to the stock ROM
When I did this tutorial using lg tools , flashing stops at 49% with an error message .
I also saw that I could access the recovery mod by following this link http://forum.xda-developers.com/showthread.php?t=2565904(but I saw that I could not otherwise reboot my phone after it was bricking ) and therefore flash my stock Rom which I had made the backup . But I do not know if the ROM has been saved and if it remained in my files after the Wipes.
If it is not there, is that in buying a micro USB ====> HUSB adapter, I could install a stock ROM from a USB key ? Or is there a way I can put files from my computer to my laptop which has no port micro sd?
And is what I could with my kernel "blocked " ?
Thank you very much
Click to expand...
Click to collapse
It sounds like you have access to recovery, so you can use adb to push or pull files from your phone. Your backup should still be on your phone, as long as you didn't wipe the internal storage.
I'd suggest pulling the important photos/videos/backup/files/etc from your phone to your computer, then wiping internal storage or wipe factory reset. Then hopefully it wont get stuck at 49%, as that is what I did for my friend's D801 to allow it to go back to stock 100%.
Exactly what i keep telling people with the same issue, Just do a full wipe in cwm/twrp before restoring to stock. the problem is allot of them can't get into recovery :silly:
Thanks for sharing! Will be useful someday
Sent from my LG G2 using Tapatalk
Posted this problem in another thread but haven't had an answer so hoping this one will help, have a vs980 with B firmware, rooted and was running cm11 Sat I installed rayglobe Rom ported to vs980 after running it for a few hours I decided to install twrp then I was gonna try phills recovery cause I was used to it, I installed freegee from the market and it ran a check and sshowed me the recoveries available for my phone, the short version is for some reason it read my phone version as the rayglobe 802 firmware and I hit install not realizing it wasn't. Reading vs980 now I have no recovery, flash tool does not work ( says wrong phone) rayglobe runs perfect but all maps dealong with root sees a 802 phone. Anyone have a idea how to fix this?
Sent from my LG-D802 using Tapatalk
quinejh said:
Posted this problem in another thread but haven't had an answer so hoping this one will help, have a vs980 with B firmware, rooted and was running cm11 Sat I installed rayglobe Rom ported to vs980 after running it for a few hours I decided to install twrp then I was gonna try phills recovery cause I was used to it, I installed freegee from the market and it ran a check and sshowed me the recoveries available for my phone, the short version is for some reason it read my phone version as the rayglobe 802 firmware and I hit install not realizing it wasn't. Reading vs980 now I have no recovery, flash tool does not work ( says wrong phone) rayglobe runs perfect but all maps dealong with root sees a 802 phone. Anyone have a idea how to fix this?
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
Edit your build.prop to the correct device and install the correct recovery
Sent from my LG-D802 using Tapatalk
No clue how to do that can u use Rom manager app to do that?
Sent from my LG-D802 using Tapatalk
quinejh said:
No clue how to do that can u use Rom manager app to do that?
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
Search is your friend, any app that can edit the build prop should work, please make a backup of your build prop. if you get it wrong your device will not boot.
Ok I found a thread on here about how to use file explorer to change the build prop it says there r 2 entries I need to change but my question is do I change it from d802 to vs980 or vs980b?
Sent from my LG-D802 using Tapatalk
leomd333 said:
Exactly what i keep telling people with the same issue, Just do a full wipe in cwm/twrp before restoring to stock. the problem is allot of them can't get into recovery :silly:
Click to expand...
Click to collapse
Well I could get into recovery but it did not fix the problem.
Please explain!
bri315317 said:
I just want to share my experience after a bad flash and no way to recover.
I was still able to get to TWRP. I had flashed a Rom and it went bad. Long story short. No Loki causing boot into fastboot screen.
Tried using flash tools to restore stock with kdz. No good kept stopping at 49% because it was not the expected firmware.
The fix.
Wipe system in recovery then try again. With system wiped. The firmware matches and installs as expected.
Just wanted to share my experience. Maybe it will help someone else with the same problem.
Brian
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
I have same problem with my F320L. I will try your method but please explain bit more that how should i do?
In twrp, first hard reset and then do full wipe (all wipe except internal memory and do not format any thing) or describe the way please?
Thanks!
bri315317 said:
I just want to share my experience after a bad flash and no way to recover.
I was still able to get to TWRP. I had flashed a Rom and it went bad. Long story short. No Loki causing boot into fastboot screen.
Tried using flash tools to restore stock with kdz. No good kept stopping at 49% because it was not the expected firmware.
The fix.
Wipe system in recovery then try again. With system wiped. The firmware matches and installs as expected.
Just wanted to share my experience. Maybe it will help someone else with the same problem.
Brian
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
When i go to recovery mode i only have function Factory reset...
Can you help me please ?
Hello guys,
i have a simple question, is it possibile to flash official MIUI using our custom TWRP recovery?
will i lose TWRP recovery if i flash official MIUI ?
thanks
You can only flash official MIUI roms again in flashboot mode
thomasginn said:
You can only flash official MIUI roms again in flashboot mode
Click to expand...
Click to collapse
I think you actually can roll-back to MIUI normaly
I also would like to know this, i believe you can flash through TWRP but i'm not sure and i would like someone to confirm this because i need to do it today and i don't have a windows system to recover it with ease if something fails.
Thanks.
I flashed miui rom zips on twrp
Sent from my Redmi 4 using XDA-Developers Legacy app
qaz.xc said:
I also would like to know this, i believe you can flash through TWRP but i'm not sure and i would like someone to confirm this because i need to do it today and i don't have a windows system to recover it with ease if something fails.
Thanks.
Click to expand...
Click to collapse
It's possible but you need to disable dm-verity in twrp (or flash lazyflasher) else it will not boot, and it will wipe your internal storage partition during installation so make sure to backup your data and place your rom in microsd rather than internal storage.
I think you better use xiaomi.eu rom rather than official, since it easier and not wiping your internal storage during installation.
Just flashed the official ROM through TWRP, disabled verify in the options just in case, threw some mount errors but installed correctly.
I just did it and it works fine.