{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is an Unofficial builds for Xperia Tablet Z LTE/Wi-Fi.
About ROM
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 7.x (Nougat), which is designed to increase performance and reliability over stock Android for your device.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
The source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Installation
Download the latest build
Place ROM in your SD card or Internal Storage
Reboot into recovery mode
Full wipe and factory reset (recommended)
Flash ROM
Reboot
Downloads
Pollux: AFH
Pollux_windy: AFHRecommended Recovery (optional)
TWRP 3.0
Pollux: https://dl.twrp.me/pollux
Pollux_windy: https://dl.twrp.me/pollux_windyGapps (optional)
OpenGapps (ARM/Android-7.1): http://opengapps.org
Information: Flash the GApps after the first boot and setup.Sources
LineageOS on Github
Kernel: apq8064
XDA:DevDB Information
CyanogenMod/LineageOS 14.1 for the Sony Xperia Tablet Z, ROM for the Sony Xperia Tablet Z
Contributors
CaHbKaUp
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Stable Release Date: 2018-05-16
Created 2016-11-09
Last Updated 2018-05-17
Update:
- Last google's november security update (Android 7.1.0_r7/NDE63X)
- Updated selinux
- WebView selection in Developer Options
- Email app welcome f/c fix
- Downloads app twin records fix
- WiFi 5Ghz update - need to test
2016/12/04
Update:
- Adaptive brightness now work
- CMFileManager fix
- Battery icons works
- Enabled pollux_windy tethering
- Disabled pollux_windy call/sms support as expected
2016/12/07
Update:
- Android 7.1.1
2016/12/20
Update:
- Android 7.1.1 r6
- Camera fix
- Switch to CM Charger
2016/12/23
Update:
- Integrated TWRP 3.0.3
2016/12/30
Update:
- Camera/TWRP fix
- Signature Spoofing patch
- updated SEPolicy
2017/01/04
Update:
- Autowakeup on charger when power off
2017/01/12
Update:
- January 2017 security patch
- CMFilemanager fix
- WiFi AP fix
- mic in Skype fix (thanks zeelog)
- FM Radio (thanks zeelog)
2017/01/24
Update:
- GPU overclock
- Camera mode fix
2017/02/16
Update:
- Kernel (Fast USB Charge, voltage table, etc)
2017/03/01
Update:
- February security patch
- Switching to Camera2 (Snap is still not correctly working)
- Build using UBERTC toolchain
2017/03/16
Update:
- March security updates
- Added new CPU governers
- MPDecision replaced by Alucard hotplug driver
- TWRP 3.1.0
2017/04/17
Update:
- Android 7.1.2
- April security updates
- Last kernel CVE's
- Google Assistant support
2017/04/17
Update for pollux_windy only:
- GPS
- WiFi issues
- Youtube issues
2017/05/01
Update:
- Network Traffic indicator
2017/05/02
Update:
- Android 7.1.2 Release 8 (N2G47O) with May 2017 security updates
2017/05/25
Update:
- TWRP 3.1.1
- Last kernel CVE's
- Disable timestamp preq (get rid off "Can't install this package (...) over newer" error)
- Enabled ZRAM
- SafetyNet bypass
2017/06/08
Update:
- June 2017 Android security patch
- Last kernel CVE's
- Enable to change TTL
- Added new TCP congestion algorithms and Westwood+ now is default
- Removed ZRAM
- SDCardFS support
2017/07/08
Update:
- July 2017 Android security patch
- Google Widevine DRM support
2017/08/08
Update:
- August 2017 Android security patch
- Panic Detection Mode
2017/09/19
Update:
- AutoSMP Hotplug driver
- State Notifier driver
- aptX codec (experimental)
2017/10/09
Update:
- October 2017 Android security patch
2017/11/24
Update:
- November 2017 Android security patch
2017/12/12
Update:
- December 2017 Android security patch
2018/05/16
Update:
- April 2018 Android security patch
Before I attempt flashing and reporting, any known issues/bugs?
botsaris said:
Before I attempt flashing and reporting, any known issues/bugs?
Click to expand...
Click to collapse
till now I reported only about 2 bugs - not working mic in skype call and Email app f/c.
Everything runs extremely smoothly, will report with more details later...
Auto brightness does not work...
i have sony pollux i tried to unlock the bootloader...the service menu says unlock bootloader allowed : no .... how to allowit tu unlock?is it possible please help
Thanks for the rom!!
Runs very smooth, gold Battery Life.
- no 5G WLAN
- no Auto Brightness
- Translation German not complete
I like it
Some apps and games runs very laggy.
Performance isnt so good.
dai_kun said:
Some apps and games runs very laggy.
Performance isnt so good.
Click to expand...
Click to collapse
which one? If you can provide logs using LogCat it would be the best effort.
CaHbKaUp said:
which one? If you can provide logs using LogCat it would be the best effort.
Click to expand...
Click to collapse
Laggy Gamees: Sw Kotor, GTA Sanandreas, reckless3
Laggy Apps: Ebay Kleinanzeigen (dont know about an international Version) Amazon Tablet, Skygo
ATM back to Stock 5.1.1
risant said:
i have sony pollux i tried to unlock the bootloader...the service menu says unlock bootloader allowed : no .... how to allowit tu unlock?is it possible please help
Click to expand...
Click to collapse
it means, your device doesn't allow bootloader unlock, so you can't install this ROM.
I tried NFS most wanted. A little old perhaps, but the graphics are improved compared to marshmallow, full of reflections, and it runs with no glitches...
Thanks a lot for this ROM @CaHbKaUp
This ROM is super smooth.. No lags.. Nougat on tablet is so awesome
After a clean installation of the last rom (nougat) I've noticed two problems. The first is the camera. It crashes randomly and I had to reboot the tablet, in order to bring it back to life. The second was the file manager that came with the rom. It does not show the files either on the internal or the external storage. I had to download and install fx from google to be able to see the files. After that I rolled back to rooted stock 5.1.1
xpil said:
After a clean installation of the last rom (nougat) I've noticed two problems. The first is the camera. It crashes randomly and I had to reboot the tablet, in order to bring it back to life.
Click to expand...
Click to collapse
Sorry, I cant reproduce it on build of 2016-11-08 even with full wipe.
Try my last update if you appreciate it.
@CaHbKaUp
First I want to thank you for your work. Sadly I did not have the time to test it yet.
Secondly it took me about a minute to find the new build in the second post. :silly: It would be nicer if you edited the first post.
And thirdly: Will this be always "unofficial" (read: private maintained) or will it become "official" (read: automatically build)?
Komapatient said:
Secondly it took me about a minute to find the new build in the second post. :silly: It would be nicer if you edited the first post.
Click to expand...
Click to collapse
Thank you for this notice - updated.
Komapatient said:
And thirdly: Will this be always "unofficial" (read: private maintained) or will it become "official" (read: automatically build)?
Click to expand...
Click to collapse
Im not a regular CM dev and not in CM team. Night builds of CM14 already started and I hope our device will be in there builds, but dont know when.
CaHbKaUp said:
Sorry, I cant reproduce it on build of 2016-11-08 even with full wipe.
Try my last update if you appreciate it.
Click to expand...
Click to collapse
I will definitely try it. Two additional problems with the November 8 rom that I did not mention in my previous message are: No FM radio and no IR blaster. Otherwise it is the best rom I have tested and I congratulate you for your work. I do not know if there is a way to fix these two things, but thank you anyway.....
Related
Code:
/*
* Your warranty is now void.
*
* I will not accept responsibility for any adverse effects to your device,
* including, but not limited to: bricking, dead SD card, bootloops etc.
*
* You mod your device at your own risk.
*/
INTRODUCTION
I picked up the work that @Schischu and @malosasha have done and plan on improving it with the work i have done on the lineage base.
DOWNLOAD
aosp-klimtwifi.deadman.20170326.215802.zip
OLDER DOWNLOADs
aosp-klimtwifi.deadman.20170309.161721.zip
GAPPS
Use OpenGapps
OTA - UPGRADES
They are not supported you will need to manually flash updates
PREREQUISITES
TWRP 3.0.0 or higher. I always use @ashyx newest builds (TWRP builds by @ashyx)
You must be on a lollipop or newer bootloader this can be done by either flashing 5.0.2/6.0.1 stock rom or by flashing a zip in odin
Don't skip this step! If the incorrect bootloader is used your device WILL NOT BOOT!
INSTALLATION INSTRUCTIONS
First time flashing the rom on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash AOSP
Install the Google Apps addon package (Optional)
Reboot
CURRENT CHANGELOG
3/26/2017
I have updated the kernel source to be lollipop based which includes lots of misc fixes and improvements
I have pulled parts of the M kernel source in (netfilter intercepter, wifi drivers)
Changed to the LineageOS based liblights, powerhal, consumerir
Removed hwtest
Removed double tap to wake (Was buggy and kept the touchkey lights on after sleeping)
Removed colortone (Was buggy and i will implement a better solution later)
misc other changes
OLDER CHANGELOGS
3/09/2017
These are the changes i have done since forking the source from @Schischu and @malosasha
Removed a ton of under the hood hacks and fixed them properly (Shim blobs instead of editing the source to support them, Add mmap support, Fix the wifi state machine instead of disabling ip reachability, etc)
Removed a bunch of proprietary blobs that were not needed (Builds are now 11mb's smaller)
Updated the drm blobs to a newer version from bullhead
Added memtrack support from the newer 5422 based bsp that we use on lineage
Fixed mtp host fc on first boot
Fixed video recording
Updated the prebuilt omx blobs
Made the QS menu bigger to be inline with lineage
ISSUES
HD Video stutters
More that i may have missed
SOURCE CODE
Manifest
Kernel
SCREENSHOTS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
XDA:DevDB Information
[ROM][AOSP 7.0] SM-T700, ROM for the Samsung Galaxy Tab S
Contributors
deadman96385
ROM OS Version: 2.3.x Gingerbread
Version Information
Status: Beta
Created 2017-03-10
Last Updated 2017-03-10
Reserved
Reserved
Thank you, thank you, than you. I have been waiting for this.
Wool be flashing shortly.
Great TY @Deadman waiting AOSP 7.1.2 for T800 Good Luck :good:
Thank you. I been waiting for SM-T805.
thanks deadman. i appreciate all the variations in roms your giving us for the T700. have a good day
Having trouble getting Viper to work with this and the latest LD build. I'll see if I can figure it out, but I thought I would post in case anyone else has already had a solution. If I find it first, I'll post in both threads.
I really hope you could make it for T705 sir
I really love the pureness and simplicity of AOSP
Thanks for keeping this tablet alive. Installation went well. Same SD card problem so I'm now a set up as portable storage. MTP host FCs whenever SD card browsing is attempted.
Battery life seems to be same as MM.
Is this better/more stable than your ASOP 7.1.1 ROM?
Pingu_3D said:
Thanks for keeping this tablet alive. Installation went well. Same SD card problem so I'm now a set up as portable storage. MTP host FCs whenever SD card browsing is attempted.
Battery life seems to be same as MM.
Is this better/more stable than your ASOP 7.1.1 ROM?
Click to expand...
Click to collapse
I haven't seen a 7.1 AOSP ROM for the T700. Do you have a link?
Maybe should have said 'based on' AOSP. I think it said that in the description.
New build in OP
I have updated the kernel source to be lollipop based which includes lots of misc fixes and improvements
I have pulled parts of the M kernel source in (GPU driver, netfilter intercepter, wifi drivers)
Updated the GPU driver to the M based one
Changed to the LineageOS based liblights, powerhal, consumerir
Removed hwtest
misc other changes
Build pulled do to some reboot issues
HD Video works fine (does not stutter)
FYI. This ROM installed and runs great on my SM-T700. I did have to install SuperSU, Open GAPPS and Titanium Backup separately (install one at a time and reboot to system after each install) instead of stacking them. But no big deal.
The main thing I want to say is the HD video plays just fine and does not stutter as stated in the intro list of issues. I've tried it on MX Player, Google Play Movies & TV, DirecTV and Showtime Anytime. I did have problems with the prior ROM versions playing any video on some of those Apps.
Thanks Deadman
New build in OP:
I have updated the kernel source to be lollipop based which includes lots of misc fixes and improvements
I have pulled parts of the M kernel source in (netfilter intercepter, wifi drivers)
Changed to the LineageOS based liblights, powerhal, consumerir
Removed hwtest
Removed double tap to wake (Was buggy and kept the touchkey lights on after sleeping)
Removed colortone (Was buggy and i will implement a better solution later)
misc other changes
I was planning to update to the M gpu driver but it is causing issues for now.
Unfortunately, I seem to get a bootloop on dirty flash. Haven't got the time to try clean flash at the moment unfortunately. Not sure if it's a problem with me or the rom. Waited for about 10 minutes but still sitting on Google animation.
franzli said:
Unfortunately, I seem to get a bootloop on dirty flash. Haven't got the time to try clean flash at the moment unfortunately. Not sure if it's a problem with me or the rom. Waited for about 10 minutes but still sitting on Google animation.
Click to expand...
Click to collapse
What room did you cone from? Did you just upgrade f from the previous build or did you cone from a different base?
amateurhack said:
What room did you cone from? Did you just upgrade f from the previous build or did you cone from a different base?
Click to expand...
Click to collapse
From the previous AOSP build by deadman from early March. I had, however, dirty flashed to that from the last build of the previous AOSP ROM from November, which didn't cause any problems.
franzli said:
From the previous AOSP build by deadman from early March. I had, however, dirty flashed to that from the last build of the previous AOSP ROM from November, which didn't cause any problems.
Click to expand...
Click to collapse
Thanks. That's good to know. I'm on AOKP right now, but I still have the .zip from that earlier build. I'll try to test this tonight.
deadman96385 said:
I have posted my t700 thread in the future i will expand the thread to have builds for the other variants (T705, T800, T805) minus T807T. But it will be staggered release because i do not have infinite time.
https://forum.xda-developers.com/galaxy-tab-s/development/rom-sm-t700-t3570515
Click to expand...
Click to collapse
Can i use [ROM][AOSP 7.x] SM-T700 for my SM-T805, or i have to wait for SM-T805 ROM-Version?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
[B][CENTER]**** Disclaimer: I'm not responsible if you destroy your device. Use at your own risk!!! ****[/CENTER][/B]
Android Open Source illusion Project
About us:
AOSIP is a quality custom rom based purely on Google AOSP source since 6.0 release. Twisted with the latest features and blended with stability. We strive for perfection and it shows.
Team Illusion:
Josh Fox (xlxfoxxlx)
Akhil Narang
Brett Montague
Sri Harsha
Harsh Shandilya
Bug reporting:
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab dmesg . (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues.
Source code:
AOSiP Gerrit Review
AOSiP Github
Kernel source
Latest Downloads:
Platina
FAQ and Install instructions:
Install instructions:
getting twrp going is discussed many places so i wont do that here but assuming you have twrp installed
boot twrp
wipe system/data/cache
flash rom
reboot system
Credit/Thanks:
Mike Williams(founder and creator of AOSiP)
Huge props to Josh Chasky, Spaceman860, Alex Cruz and the rest of DU teams work on 3/3xl
Google
LineageOS
AICP
ABC Rom
Omni
ChainFire (SuperSU)
Beanstown106
Cory Collins
Sultanxda
flar2
---------
Any others i may have forgotten
All our testers
XDA:DevDB Information
[9.0] [OFFICIAL] [9.0.0_r39] AOSiP [Platina], ROM for the Xiaomi Mi 8 Lite
Contributors
nysadev, nysadev
Source Code: https://github.com/nysadev/lyra-4.4
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Stable
Created 2019-05-06
Last Updated 2019-05-15
Changelog:
04/05/19:
Kernel changelog:
- Lyra kernel 1.2:
- Based on ALS 4.4.179, latest CAF tag
- Clean imported Xiaomi code to remove Xiaomi leftover ****
- Energy Aware Scaling, with kdrag0n's energy model
- Hardcoded schedutil values so no ramdisk modifications
- Schedutil optimisations
- Dynamic schedtune enabled
- Introduce cpu_input_boost driver and devfreq (GPU) boosting
- Disable CPU boost in favour of cpu input boosting
- Boost CPU and DDR during new frames
- Kill userspace CPU boosting
- Set minimum frequently of the little cores to 902MHz for efficiency
- Enabled and set CPU masks
- Optimize CFQ
- Allow tasks to be performed as performance critical (new API)
- Add console ramoops support (thanks to @Lunarixus)
- F2FS enabled
- Latest Qcacld-3.0 from CAF
- LZ4 kernel compression
- Removed useless sdm660 dtbs
- KCAL support
- VDSO32 enabled
- Enable jump label
- Smooth and battery friendly
Device changelog:
- Compile HWUI in performance mode
- Optimise F2FS flags
- Remove HAL1 forcing of apps
Hi all,
I'm really sorry, I don't hang much around on XDA, I really should be updating these threads.
A few questions have been asked which I shall answer.
1. Does the 04/05 build fix switching off bug?
- Yes, it does. I'm sorry about the 28/04 build causing this issue - this was because I implemented EAS, and after testing, I thought the build was ready to go, however the bug never occurred on my end. I still don't know what caused the issue but the 4th May build switched to the Lyra 1.2 kernel which has EAS, made by me, which doesn't cause the deep sleep issue. (Thanks to my testers on Telegram for all the hard work and testing!)
2. Why is the front camera broken on some apps but not others/not working at all?
- The front camera was fixed in Instagram and WhatsApp on the 04/05 build, but if you still have issues on all apps, please install the newest global stable firmware. This is really important as developer betas do not work properly.
3. I have issues with sound, long boot time and sensors etcetc, your ROM is broken?
- No, you need to install the global stable firmwares (10.2.3.0/10.3.x.x and beyond). I cannot stress this enough. Soon if I find an adsp fix I'll fix all firmwares but Xiaomi really hacked something together.
4. My phone is showing "There's a problem with your phone, please contact the manufacturer" on boot. Did you break my phone?
- No, I didn't. I'm not sure why but after moving to custom kernels this message will appear. There is nothing wrong at all, and I believe I know the fix for it. I'll experiment after I'm done writing this message. Again, this causes no issues, do not stress about it.
5. Can you actually post changelogs?
- Yeah, I should. I'm very lazy/busy
6. Is it true you have exams soon?
- Yes, as of the time of writing, I have exams from the 13th May - 17th June. I'm in my last year of secondary school (being 16 in Year 11) and these are my GCSEs to go on to college. Builds will not have as many changelogs as I won't be able to dedicate much time.
A huge apology to my users out there that use my builds that were caught by the deep sleep freeze bug. I will work harder in the future to test and properly debug builds.
Thank you to everyone that still continues to use my builds. Feel free to message me on Telegram (@nysadev) or join our group. PM me for details.
Thank for this rom : I love aosip. I try tonight.
And good luck with your exams.
Great job @nysadev I'm currently using for more than 3 days with all lyra versions (you know that :winkk and so far so good.
By the way guys, we've gone official now.
You can find downloads here: https://aosip.dev/platina
Well done dev'
Thanks
nysadev said:
By the way guys, we've gone official now.
You can find downloads here: https://aosip.dev/platina
Click to expand...
Click to collapse
thanks.
bug in beta dont work sound
halleybr said:
thanks.
bug in beta dont work sound
Click to expand...
Click to collapse
Forgot to specify 1.4 used the ADSP patch for developer betas. I will revert this and make a standalone kernel for the MIUI guys.
nysadev said:
Forgot to specify 1.4 used the ADSP patch for developer betas. I will revert this and make a standalone kernel for the MIUI guys.
Click to expand...
Click to collapse
Thank you... you post in this thread? thanks
Edit: i instaled Lyra 1.4 stable kernel and work fine
ROM side: Check AOSiP changelog
Device side:
- Reworked powerHAL (smooth and better battery)
- Reworked device tree
Kernel side:
- Lyra 1.6
- iommu rewritten and cleaned
- Use analog dimming for the screen
- Use a default power level on the GPU of 5 (160MHz)
- Remove HUGE amounts of logging in binder (really helps in battery I think)
- Update CPU Input Boost and like actually disable the ****ty inbuilt one
- Add a new, interpolated energy model
- Update LMK (simple low memory killer)
- Boost RCU
- CPUIdle more inline with Wahoo
- Remove a lot of high priority workflags for actual queuing
- Remove a lot of Qcacld-3.0 mess
- Fixed af SDcards
First fully official build. Stable, smooth and battery friendly as hell.
Let me know how it goes
THnx
Is the gapps included in or i have to flash the gapps?
how to enable face unlock on this rom ?
Dt2w work?
toniq said:
Dt2w work?
Click to expand...
Click to collapse
yes but till now i can't find faceunlock feature
Signal takes around 4 minutes to work on every reboot any fix?
Smoothest Rom so far. But the screen is too dark. Even at the highest settings.
hey still can't find the face unlock feature also when it comes to the fingerprint , sometimes it doesn't respond when the screen is off i have to press the power button then use it
Thank you very much for your work!
Please, fix this bug:
Hucast_DL said:
Signal takes around 4 minutes to work on every reboot any fix?
Click to expand...
Click to collapse
Last build doesnt boot... Only bootanimation forever
[ROM][11][MI-A3] PixelExperience [AOSP]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience for MI-A3 [laurel-sprout]
What is this?
PixelExperience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, boot animation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 11
What's working?
Wi-Fi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FM radio
Fingerprint reader
Face unlock
NFC
Lights
FOD
Sound/vibration
Known issues
Nothing yet
You tell me
DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED
Download
PE
PE-plus
Lineage Recovery
Method to flash
Here
Donate
Liked my work? Give me a beer
Translation
Help with project translation
Stay tuned
Our Telegram channel
Our blog
Notes
Google apps are pre-included, hence it isn't needed to flash them on-top
Custom Recovery not included
OSS vendor based
Android 11 firmware Based
Android OS version: 11.0.0_r39
Security patch level: July 2021
Build author/Device Maintainer: Royal_Turd
Support Group: Here
Device Source code: Here
Vendor Source code: Here
Kernel Source code: Here
Source code: https://github.com/PixelExperience
ROM Developer: jhenrique09
1. Stocc (Q) vendor or OSS?
2. Any plans on making a A11 Fw build?
If you want to use stocc R sources check out MasterAwesome's LOS 8.1 trees and VishalCJ's Kernel soruces... I hope to switchto PE soon, but unfortunately I'm stuck with A11 firmware
All the best dev! And thanks for your work : )
Sairagav said:
1. Stocc (Q) vendor or OSS?
2. Any plans on making a A11 Fw build?
If you want to use stocc R sources check out MasterAwesome's LOS 8.1 trees and VishalCJ's Kernel soruces... I hope to switchto PE soon, but unfortunately I'm stuck with A11 firmware
All the best dev! And thanks for your work : )
Click to expand...
Click to collapse
1. it's OSS based vendor
2. yes i am working on A11 fw build
Great!!!
finally a support I have been waiting since October for an update to Android 11
Wallpaper from a file is not resizing properly.
impossible to activate bluetooth, there is no longer the possibility of hiding the navigation bar then on PE Android 10 it is possible to hide
help me please
my region need open diag port and put some files for using volte service(should use "efs exploer")
it was passiable in the pie version but is is impasible since 10 version
i said it based offical rom
i don't test custom rom covered PixelExperience
would you tell me this issue after test
i be frozen at pie
because i have one phone and i feel very hard for test process, also back process
please help me
i am sorry for my poor english
Hello,where is the download file? When I`m following the link,there are too many files and I can not see any PixelExperience file.
June update is up
Changelog:
- Merged June Android Security Patch
- Added App Lock (only in Plus)
- Updated GApps
- reworked advanced reboot (only in Plus)
- Spoofed Google Photos to Pixel 1 XL (unlimited photos backup)
- Improved Face Unlock
- Updated translations
- Fixed OK Google detection
- Dropped ARCore, LiveWallpaper & Google Recorder
- Tuned haptics intensity
- labelled all wakeup nodes properly
- labelled all camera props and nodes properly
- addressed vendor init files denials
- Fixed in-call proximity sensor
- disabled slub debug
- switched to Pixel Thermal HAL (Fixes device too hot warning in some Google Apps)
- enabled 2.4GHz wifi bonding (improves wifi speeds)
- Ditched rild & Enabled QC RIL service
Royal_Turd said:
June update is up
Changelog:
- Merged June Android Security Patch
- Added App Lock (only in Plus)
- Updated GApps
- reworked advanced reboot (only in Plus)
- Spoofed Google Photos to Pixel 1 XL (unlimited photos backup)
- Improved Face Unlock
- Updated translations
- Fixed OK Google detection
- Dropped ARCore, LiveWallpaper & Google Recorder
- Tuned haptics intensity
- labelled all wakeup nodes properly
- labelled all camera props and nodes properly
- addressed vendor init files denials
- Fixed in-call proximity sensor
- disabled slub debug
- switched to Pixel Thermal HAL (Fixes device too hot warning in some Google Apps)
- enabled 2.4GHz wifi bonding (improves wifi speeds)
- Ditched rild & Enabled QC RIL service
Click to expand...
Click to collapse
can flash this? i'm in android 11 stock
kyuuby27 said:
can flash this? i'm in android 11 stock
Click to expand...
Click to collapse
Yes you can
Royal_Turd said:
Yes you can
Click to expand...
Click to collapse
Good rom, FM Radio is working , just a bug, LDAC bluetooth codec not working
full pro bhaiyaG
Will there be any official support for this phone? I see this is unofficial PE.
Best custom rom I ever used. The ui is fluid and fast. Also fingerprint works smoothly
cimbajunior said:
Will there be any official support for this phone? I see this is unofficial PE.
Click to expand...
Click to collapse
It's Unofficial build but if you want smooth experience and stock android then it is for you. The ui is very fluid and smooth. Also FOD works perfectly
neprix said:
Wallpaper from a file is not resizing properly.
Click to expand...
Click to collapse
Because in android 11 there is a zoom in and zoom out transition so the wallpapers are little bit cropped for the transition
Santosh Kumar Mishra said:
It's Unofficial build but if you want smooth experience and stock android this then is for you. The ui is very fluid and smooth. Also FOD works perfectly
Click to expand...
Click to collapse
Im using official build from October 2020 but its on Android 10. Works perfectly for me,no bugs. Are there any bugs on this rom?
cimbajunior said:
Will there be any official support for this phone? I see this is unofficial PE.
Click to expand...
Click to collapse
I am not planning to go official atm but the main difference between official and unofficial is just OTA
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/11.0/README.mkdn
Flashing Instructions:
Pre-installation:
TWRP (Download from here)
Gapps (Download from here)
Magisk 20.0 or newer for root (after first boot) - (Download from here)
First time installation:
flash latest TWRP via fastboot
reboot to recovery
adb sideload path/to/rom.zip OR copy file and flash manually
adb sideload path/to/magisk.zip OR copy file and flash manually
format data (recommended)
reboot to system
enjoy!
Update installation:
reboot to recovery
adb sideload path/to/rom.zip OR copy file and flash manually
adb sideload path/to/magisk.zip OR copy file and flash manually
reboot to system
enjoy!
Sources:
ROM: https://github.com/crdroidandroid
Device sources:
local_manifests/griffin/A11crDroid.xml at main · SirRGB/local_manifests
local manifests made for building various roms. Contribute to SirRGB/local_manifests development by creating an account on GitHub.
github.com
GitHub - LineageOS/android_kernel_motorola_msm8996
Contribute to LineageOS/android_kernel_motorola_msm8996 development by creating an account on GitHub.
github.com
Download:
Sourceforge
Known issues:
Moto Mods like JBL speaker
FPS Meter sepolicy denials addressed
Front flash not working (fixed using open camera thanks to @PriToX)
Untested:
Moto Mods (except battery mod)
SIM functionality
thanks to @immortal14 for testing
Visit official website @ crDroid.net
crDroid Community Telegram
Donate to help the CrDroid team pay server costs
Special thanks to @erfanoabdi and @npjohnson for maintaining trees
and to @impassibile and @PriToX for testing
Code:
Changelog:
17th Febuary
Upstream to 7.27
February security patch
Misc kernel improvements
15th January:
Upstream to 7.26
January security patch
16th December
Upstream to 7.25
December security patch
20th November
Upstream to 7.24
November security patch
13th October
Upstream to 7.23
October security patch
Include extended ADPU
Various performance improvements
Update media codecs
Tree cleanup
Add smart pixels
Fix FPS meter
Add zram
10th February
Upstreamed Gapps build to 7.14
January security patch
25th January
Upstreamed Vanilla build to 7.14
January security patch
25th December:
Added Telegram group
21st December
Upstreamed Vanilla build to 7.13
December security patch
15th December
Upstreamed Gapps build to 7.13
December security patch
18th November
Added Gapps build
11th November
Upstreamed to CrDroid 7.12
November security patch
13th September
Upstreamed to CrDroid 7.10
remove opencam, somehow fixed?
September security patch
12th September
Upstreamed to CrDroid 7.9
added Open Camera, to fix front flash
20th June
Initial upload
Super! Thank you! SIM WORK!
thank you, I updated the description
This Rom Support Moto Mod? Thanks..
I used the standart sources, so it should work, but if you test it would be nice.
No luck for me, i flashed this rom, stuck at moto logo, its suddenly restart after patching vendor image at twrp.., Please advise..
RW168 said:
No luck for me, i flashed this rom, stuck at moto logo, its suddenly restart after patching vendor image at twrp.., Please advise..
Click to expand...
Click to collapse
Have you formatted data? Sorry forgot that in flashing instructions.
yes, you right its need formatted data, now its can flash, but jbl speaker is not working too, but thanks anyway...
how is the battery backup and multicore performance of this rom, i tried lineage os17.6. but it keeps disabling 2 cores automatically ,no matter which battery usage option i select. And battery drained over night (even with disabled lock screen features and ambient display ). overall its stuttery.
Resurrection remix 5.8.5 worked fine good battery life , good geekbench 5 score too.
Desi Rockstar said:
how is the battery backup and multicore performance of this rom, i tried lineage os17.6. but it keeps disabling 2 cores automatically ,no matter which battery usage option i select. And battery drained over night (even with disabled lock screen features and ambient display ). overall its stuttery.
Resurrection remix 5.8.5 worked fine good battery life , good geekbench 5 score too.
Click to expand...
Click to collapse
I personally use this rom as a daily driver (without sim) and battery life is ok. It is a Moto Z after all. Geekbench 5 scores are 240 in Single and 600 for Multicore, but it fluctuates very much. I havent noticed heavy lag, seems usuable to me.
How's the mod support? Especially for battery mod, does it have efficiency or any way to stop charging from attached mod etc?
According to a tester battery mod works on Project Sakura, so it should theoretically work. I havent implemented smart charging, so it will charge on 100% if you dont use 3rd party apps to prevent that.
heithered said:
How's the mod support? Especially for battery mod, does it have efficiency or any way to stop charging from attached mod etc?
Click to expand...
Click to collapse
But other mods like JBL speaker dont work. In the end there is only one way to find out if something works...testing
When shooting with the front camera, the front flash does not work!
immortal14 said:
When shooting with the front camera, the front flash does not work!
Click to expand...
Click to collapse
Thx, added to known issues...
Thank You SirRGB for your work building this and the Project Sakura rom.
I am currently using this one (crDroid) on my moto z and it works wonderfully. I am about to get my (internal) battery replaced in mine so i can actually start to use it again. Once I do get it replaced, hopefully by the end of the month I happily volounteer my time for testing or feedback.
Once again, great work and much appreciated!
A few things noticed so far.
Settings/About Phone/Modell = Pixel 5.
My bad, it does say "Moto Z", just reflashed. Something I did changed it
Dualsim functionality is working, i get signal and whatnot on both cards.
VoLTE might be working. Not getting the icon in the statusbar for it, but i do get the option to enable/disable "VoLTE Services" or how it is phrased in settings. Not getting that option for the simcard what is not VoLTE capable. It makes me belive it is "kind of working"? Havent been able to verify that it actually does work.
Also, not ROM related. But dualsim + sd card wont work. I tried my best but it just wont fit into the slot
I guess im bit spoiled now with my current Redmi 7 what does dualsim+sdcard hehe.
PriToX said:
A few things noticed so far.
Settings/About Phone/Modell = Pixel 5. Dualsim functionality is working, i get signal and whatnot on both cards.
VoLTE might be working. Not getting the icon in the statusbar for it, but i do get the option to enable/disable "VoLTE Services" or how it is phrased in settings. Not getting that option for the simcard what is not VoLTE capable. It makes me belive it is "kind of working"? Havent been able to verify that it actually does work.
Also, not ROM related. But dualsim + sd card wont work. I tried my best but it just wont fit into the slot
I guess im bit spoiled now with my current Redmi 7 what does dualsim+sdcard hehe.
Click to expand...
Click to collapse
I think you installed a Magisk module that spoofs the Pixel 5, because I cant replicate this. Anyway, thank you very much for testing this rom, I will probably try to build it another time.
[APP][MOTO-MODS]Battery Mod Percentage + Efficiency Enhancer
Battery Mod Percentage + Efficiency Mode Enhancer this is an app to Read Battery Moto Mod Details for Custom Roms (like RR, LOS) we can use this app to see battery mod percentage until custom roms start supporting mods completely if you guys...
forum.xda-developers.com
This one appears to work on this rom. It might work on Project Sakura too, but havent tried it. Moto Mods default app works just fine with battery pack but i was curious if this one would still work. It shows the battery percent in it's notification where moto mod doesnt. Not a biggie as the "default battery indicator" seems to show the battery pack 's level when attached. Erfan 's mod does allow for changing the default start/stop values for charging, which i cant really test at the moment if it is actually working because my internal battery is "dead" and it is always charging
What you need is the BatteryModPercentage.apk & working Xposed. I am using Riru(Core) + LSposed.
When enabling the xposed module tick "System Framework" and hit okey and it should work.
Reboot as needed
I did notice the app is little bit grumpy at times and wont launch, just hit it again or in worst case, force kill it and it should come to life.
Thanks for sharing this app, but sadly I dont have a battery pack to test it.
I am sure others will appreciate it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
VoltageOS 13.0 | Tiramisu for Redmi 4x Santoni
ABOUT
Greetings, interested users! You have reached the gateway of a simplistic, no frills pure AOSP experience that will not let you down in getting through every day uninterrupted by inconveniences, with just the right dab of customizations. Be it requiring safetynet for banking or payment apps to receiving the latest security patches from Google as soon as they're released, we've got you covered. It doesn't end there. Sit back, relax and let the system theme your device according to your preferences with Monet support. Step in and begin your journey with Voltage OS.
Features
Pure AOSP
Latest Security Patches
Google Monet
SafetyNet
Github: https://github.com/VoltageOS
Website: https://voltage-os.sourceforge.io
Telegram: Group
Donate: UPI: [email protected]
WHAT WORKS?
Almost everything
WHAT DOESN'T WORK?
Bluetooth calling doesn't work (bluetooth restart itself)
Be sure to include a log : check how to
DOWNLOADS
Click here to Download
Installation Guide
It's mandatory to be on the latest miui official firmware of your region
Clean flash recommended
Always make a nandroid backup, be safe.
* If users were encrypted on their previous roms they need to FORMAT DATA in recovery first
its FORMAT and not WIPE understand the difference, if you dont format data the rom will bootloop as you have previous rom encryption.
* VoltageOS for santoni is decrypted rom so no need to flash any dfe zips.
- Use the latest orange fox recovery from here
- Wipe all the following
* Dalvik / ART Cache
* Cache
* System
* Vendor
* Data
- Flash latest miui firmware for your specific region
* Global | China Firmware
- Flash VoltageOS + Gapps
- Wipe Dalvik / ART Cache, Cache & Data
- Reboot
ROM Source: https://github.com/VoltageOS
Kernel & Device Source: VoltageOS Devices
Special thanks to @Anar_Jabiyev for trees @DmitriiKudas for Source build help & assistance, last but not least I would like to thank all testers
If you liked my work don't forget to give thanks, hit like, buy me a coffee UPI: [email protected]
ROM OS Version: Android 13 | Tiramisu
ROM Kernel: Linux 4.9.x
ROM Firmware Required: MIUI v11
Based On: AOSP
- Some Screenshots
Changelog :
Device Side :
30/12/2022
- Initial Build
18/01/2023
- Fix bluetooth calling
- Disable Skia tracing by default
- Disable Async MTE on System Server
16/02/2023
- Fix bluetooth calling
- Disable bluetooth enhanced SCO connection
- Fix Wifi dosent work after turning off hotspot
- Compiled using TheRagingBeast TRB clang 17
- Bump zram max_comp_streams to 8
- Update multiple vibration strength levels overlay
23/04/2023
- Disable Bluetooth APCF Extended features
- Drop bluetooth Aptx blobs as of Android 13 QPR2, AOSP Bluetooth APEX supports aptX/aptX HD
06/05/2023
- Enable ro.hwui.render_ahead prop & set it to 20 frames
Source Side : VoltageOS v 2.5
Wow, what a fantastic release! I'm testing it on my phone since yesterday and no problems so far.
dennon27 said:
Wow, what a fantastic release! I'm testing it on my phone since yesterday and no problems so far.
Click to expand...
Click to collapse
I hope you enjoy the experience, to be honest i dont have high hopes left with santoni, being able to boot a13 on this old soc is a big thing in itself. Not expecting much...
Pranav Temkar said:
I hope you enjoy the experience, to be honest i dont have high hopes left with santoni, being able to boot a13 on this old soc is a big thing in itself. Not expecting much...
Click to expand...
Click to collapse
Yes, btw its mind blowing that my 5 year old secondary phone is running more recent software than my almost new sub $1000 primary one, thanks again Pranav.
thank you, it worked
dennon27 said:
Wow, what a fantastic release! I'm testing it on my phone since yesterday and no problems so far.
Click to expand...
Click to collapse
Can you please help me to install it?
Suyog jaiswal said:
Can you please help me to install it?
Click to expand...
Click to collapse
Just follow the OPs guide, its pretty self explanatory:
Pranav Temkar said:
Installation Guide
It's mandatory to be on the latest miui official firmware of your region
Clean flash recommended
Always make a nandroid backup, be safe.
- Use the latest orange fox recovery from here
- Wipe all the following
* Dalvik / ART Cache
* Cache
* System
* Vendor
* Data
- Flash latest miui firmware for your specific region
* Global | China Firmware
- Flash VoltageOS + Gapps
- Wipe Dalvik / ART Cache, Cache & Data
- Reboot
Click to expand...
Click to collapse
Ask if you have any questions
dennon27 said:
Just follow the OPs guide, its pretty self explanatory:
Ask if you have any questions
Click to expand...
Click to collapse
I have never installed a custom rom on any of my devices and things like unlocking bootloader , using the custom recovery etc, can you please help me with those 1st few steps ?
Suyog jaiswal said:
I have never installed a custom rom on any of my devices and things like unlocking bootloader , using the custom recovery etc, can you please help me with those 1st few steps ?
Click to expand...
Click to collapse
Before you try anything make sure to backup all important files you have on your phone.
First you need to unlock your bootloader and unfortunately i wont be much help here 'cause i unlocked mine years ago and i don't remember much how i did it, but if i would need to start again today i would follow this guide:
installing orange fox is shown here:
just make sure that you install version of orange fox provided by Pranav Temkar and not from youtube video
And finally copy voltage-2.1-santoni-20221230-1609-OFFICIAL.zip file to the phone, boot to orange fox and follow Installation Guide.
Happy New Year, new update is live with january 2023 patch
Build Date : 18/01/2023
Changelog :
Device Side :
- Fix bluetooth calling
- Disable Skia tracing by default
- Disable Async MTE on System Server
Source Side :
• Merged January Security Patch (android-13.0.0_r20)
• Added Linotte Font.
• Fixed Back Gesture arrow customisation.
• Fixed Dark text on White QuickSettings.
• Fixed Center clock.
• Upstreamed GMSCompat from GrapheneOS.
• Improvements on VoLTE and VoWiFi icons.
• Fixed glitched Charging Information.
• Redesigned Launcher Recents.
• Added Blur/Opacity options in Launcher.
• Added LockScreen Shortcuts.
• Fixed Blurry Default Wallpaper Preview.
• Updated Default Wallpaper.
• Fixed ZRAM SePolicy spam.
I found two bugs.
1. Hotspot issue. Mobile hotspot works only first click. If I turn off hotspot I can not turn it on again . Even wifi also stops when mobile hotspot turn off. System needs to reboot to turn on wifi again.
2. LTE does not comes up. I need to change network to WCDMA / GSM
Then it turns on mobie data, after than I can change to LTE
Does it support ota updates?
Hi, is it possible to enable encryption?
battery so lavish
I found a bug, i cant turn on wifi after i use hotspot thetering. In short, i cant turn on wifi after i turn on the hotspot. I must restart the phone to turn on wifi.
Thanks for giving santoni newlife. Using latest build, I've found some issues & bugs hopefully it'll be fixed in future.
Issue's
1. SystemWebview outdated.
If possible switch to Mulch webview. (shorturl.at/dnqv5) it uses patches from the Vanadium Project by GrapheneOS)
2. Applock/hide missing.
3. Encryption support.
Bug's
1. Bluetooth calling not working i can hear only distortion sound.
2. Hotspot bug as already reported by users in #13 & #17 comments.
#Added screenshot for outdated webview & missing applock/hide.
I got a problem after installation.
After following the above steps and rebooting, the phone shows the "Voltage" since 1h, I guess it is stuck somewhere.
Is there a possibility to see where/why it is looping?
Long press action and double tap action is not working when set to screenshot.