Database Users

551ml Bricked after updating to new offical MM build. (help pls)

Hello guys, I noticed this morning that MM was officially released today. I followed the steps on to update my phone. I downloaded the rom for 551ml put it on my root of my internal storage, after that a pop up showed that there was a system update. I did the update and now my phone wont turn on now. It vibes twice and nothing comes on the screen. I have no idea how to fix it. I was on the latest firmware that system update would give me (184). If someone isn't busy could they possibly help me out. thx..

Same issue here, have you found a solution yet?

arturocr said:
Same issue here, have you found a solution yet?
Click to expand...
Click to collapse
tyring a guide atm but links seem to be outdated. I managed to get in fastboot or whatever its called when you can boot in to recovery. but from there I cant do anything.

You cant get into recovery after fastboot?
Sent from my ASUS_Z00AD using XDA Premium HD app

same problem ,
so im from cm 13 lastest build , and then i wipe data from twrp , after that i directly flash MM offical rom and its done without any problem. the problem start after i reboot system. my phone just vibrating twice with no lights led on , no screen on , no asus logo , can't go to recovery nor fastboot just keep restarting i guess because after a couple minute it vibrate again.
when i charge it wont show charging battrey , only stuck at battrey logo with zap with no charging animation.
don't have any clue. can anyone help ?
try to connect to pc but only show "moorefield" with (?).
sorry for my bad english.

Same for me...

baonxxx said:
same problem ,
so im from cm 13 lastest build , and then i wipe data from twrp , after that i directly flash MM offical rom and its done without any problem. the problem start after i reboot system. my phone just vibrating twice with no lights led on , no screen on , no asus logo , can't go to recovery nor fastboot just keep restarting i guess because after a couple minute it vibrate again.
when i charge it wont show charging battrey , only stuck at battrey logo with zap with no charging animation.
don't have any clue. can anyone help ?
try to connect to pc but only show "moorefield" with (?).
sorry for my bad english.
Click to expand...
Click to collapse
I think mm system.img boot.img splashcreen.img need mm bootloder to run and at the moment twrp doesnt work with it, if you install mm via twrp you only updating these img and bootloader still lp that causes your phone cant boot. (Correct me if im wrong)
So now you need xfstk downloader to recover your fastboot and then flash .194 raw firmware using asus flash tool then adb sideload mm firmware from stock .194 recovery, theres guide how to do that in here but im forget where
Sorry my english are bad too..

miku1024 said:
I think mm system.img boot.img splashcreen.img need mm bootloder to run and at the moment twrp doesnt work with it, if you install mm via twrp you only updating these img and bootloader still lp that causes your phone cant boot. (Correct me if im wrong)
So now you need xfstk downloader to recover your fastboot and then flash .194 raw firmware using asus flash tool then adb sideload mm firmware from stock .194 recovery, theres guide how to to that in here but im forget where
Sorry my english are bad too..
Click to expand...
Click to collapse
how does make xfstk work ? don't have idea how. it just show nothing after i open xfstk , have a reference link ?

baonxxx said:
same problem ,
so im from cm 13 lastest build , and then i wipe data from twrp , after that i directly flash MM offical rom and its done without any problem. the problem start after i reboot system. my phone just vibrating twice with no lights led on , no screen on , no asus logo , can't go to recovery nor fastboot just keep restarting i guess because after a couple minute it vibrate again.
when i charge it wont show charging battrey , only stuck at battrey logo with zap with no charging animation.
don't have any clue. can anyone help ?
try to connect to pc but only show "moorefield" with (?).
sorry for my bad english.
Click to expand...
Click to collapse
baonxxx said:
how does make xfstk work ? don't have idea how. it just show nothing after i open xfstk , have a reference link ?
Click to expand...
Click to collapse
I found the link!
You need You need asus usb and intel soc drivers
Heres
http://forum.xda-developers.com/zenfone2/general/guide-fix-bricked-ze550ml-ze551ml-usb-t3405840

Try this: http://forum.xda-developers.com/zenfone2/general/guide-how-to-update-to-official-mm-t3452082

miku1024 said:
I think mm system.img boot.img splashcreen.img need mm bootloder to run and at the moment twrp doesnt work with it, if you install mm via twrp you only updating these img and bootloader still lp that causes your phone cant boot. (Correct me if im wrong)
So now you need xfstk downloader to recover your fastboot and then flash .194 raw firmware using asus flash tool then adb sideload mm firmware from stock .194 recovery, theres guide how to do that in here but im forget where
Sorry my english are bad too..
Click to expand...
Click to collapse
I used XFSTK to upload firmware etc... but after upload firmware, the phone will vibrate twice and download of OS will not start... the soft will try 20 attemps to connect with the phone and the OS part can't be download on the phone... I'm stick at this point.

Hello guys, i'm trying to unbrick my phone, i'm following this guide http://forum.xda-developers.com/zenf...l-usb-t3405840 but when i get to the end of te install of intelSoC my device is detected as Moorefield for like 4-5 seconds and then it disappears. I've been trying to solve this for like 4 hours now, a little help would be much appreciated.

quarterbreed said:
tyring a guide atm but links seem to be outdated. I managed to get in fastboot or whatever its called when you can boot in to recovery. but from there I cant do anything.
Click to expand...
Click to collapse
try this if you unable to flash
http://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785

sukhwant717 said:
try this if you unable to flash
http://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
Click to expand...
Click to collapse
I did this morning and it worked. Im on 6.0.1 now, I guess the cause of my brick was that I had TWRP installed. Now I know next time to remove it before updating lol.

quarterbreed said:
I did this morning and it worked. Im on 6.0.1 now, I guess the cause of my brick was that I had TWRP installed. Now I know next time to remove it before updating lol.
Click to expand...
Click to collapse
glad to know that it worked. but sad to know that despite that you didn't hit thanks

quarterbreed said:
I did this morning and it worked. Im on 6.0.1 now, I guess the cause of my brick was that I had TWRP installed. Now I know next time to remove it before updating lol.
Click to expand...
Click to collapse
If you don't need to use twrp everyday (maybe just a backup from time to time) you'd better keep stock recovery and whenever you need something from twrp, you just boot into it without flashing with the usual "fastboot boot twrp.img" command. That way if you ever upgrade again you don't have to remember whether you removed twrp before. But that's just an opinion, since if done that way, you'd need to have yor phione hooked to a computer to get into twrp, an that's not always possible.

thanks
quarterbreed said:
I did this morning and it worked. Im on 6.0.1 now, I guess the cause of my brick was that I had TWRP installed. Now I know next time to remove it before updating lol.
Click to expand...
Click to collapse
sukhwant717 said:
try this if you unable to flash
http://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
Click to expand...
Click to collapse
that link saved my phone, thanks man

sukhwant717 said:
glad to know that it worked. but sad to know that despite that you didn't hit thanks
Click to expand...
Click to collapse
I just hit thanks now, I was at my limit of 8 at the time.

Uninstalled OS! Please help!

Hello,
I tried to root my phone and everything worked well untill i wanted to install Android 7 Beta on my Huawei Mate 8 (NXT-L29), so i flashed (i think a wrong) a update.zip and as i restarted my phone it didnt boot anymore! Anything i tried wasnt working, so i hope you guys could help me!
Thanks in advance!

EddiFaddy said:
Hello,
I tried to root my phone and everything worked well untill i wanted to install Android 7 Beta on my Huawei Mate 8 (NXT-L29), so i flashed (i think a wrong) a update.zip and as i restarted my phone it didnt boot anymore! Anything i tried wasnt working, so i hope you guys could help me!
Thanks in advance!
Click to expand...
Click to collapse
download this software and follow the instructions to unbrick your phone then choose the firmware you want to update it........root from the beginning carefully
+ttp://whw.needrom.com/download/huawei-mate-8-nxt-l29-unbrick-firmware/

omerus10 said:
download this software and follow the instructions to unbrick your phone then choose the firmware you want to update it........root from the beginning carefully
+ttp://whw.needrom.com/download/huawei-mate-8-nxt-l29-unbrick-firmware/
Click to expand...
Click to collapse
Thanks a lot! I will try! I will reply if it worked or not

omerus10 said:
download this software and follow the instructions to unbrick your phone then choose the firmware you want to update it........root from the beginning carefully
+ttp://whw.needrom.com/download/huawei-mate-8-nxt-l29-unbrick-firmware/
Click to expand...
Click to collapse
Ok, i did follow the steps and it still doesnt boot! What should i try next?

If you installed an update zip it probably wants the stock recovery which you can get in the development thread on this forum. Flash that through fastboot then throw a folder named dload with an update.app in it on your sd card. Phone off hold power vol up and vol down until it brings you to a circle with emui inside. Should run fine after that. If not use the stock recovery to factory reset.
The reason your phone won't boot is because out never encrypted itself.for some reason that means life or death to mate 8 firmware

EddiFaddy said:
Ok, i did follow the steps and it still doesnt boot! What should i try next?
Click to expand...
Click to collapse
when you start the flash.all.bat and you see the unbrick message your phone should be busy and install the above official firmware and recovery.If not run it again disconnect your phone and connect it again when the unbrick message shows.To me worked fine.You must have your phone in fastboot off course

Stock Firmware for L29C567? Phone soft bricked!

I was installing TWRP and superuser and something failed. Now the phone soft resets and bounces between TWRP and Huawei eRecovery. Does anyone have a L29C567 firmware I can flash? I've done some searching and there doesn't seem to be any sources for the firmware yet. Just trying to get the phone working again.
I think I could use FunkyHuawei if they had the firmware but I don't believe they do yet.
Edit: Looks like I put this in the wrong sub forum, sorry

Please be patient. Soon enough it will be available.

JJBTEXAS said:
I was installing TWRP and superuser and something failed. Now the phone soft resets and bounces between TWRP and Huawei eRecovery. Does anyone have a L29C567 firmware I can flash? I've done some searching and there doesn't seem to be any sources for the firmware yet. Just trying to get the phone working again.
I think I could use FunkyHuawei if they had the firmware but I don't believe they do yet.
Edit: Looks like I put this in the wrong sub forum, sorry
Click to expand...
Click to collapse
When that happened to me I flashed the update_full_hw_spcseas.zip folder through dload (vol up + down + power) to get the phone booting again.

Try this guide,it will change ur region to Asia C636 but the phone will work 100%
You can rebrand later when official USA version is available.
https://forum.xda-developers.com/mate-9/how-to/guide-rebrand-chinese-al00-mate9-to-t3554656/page4

gm007 said:
Try this guide,it will change ur region to Asia C636 but the phone will work 100%
You can rebrand later when official USA version is available.
https://forum.xda-developers.com/mate-9/how-to/guide-rebrand-chinese-al00-mate9-to-t3554656/page4
Click to expand...
Click to collapse
Yes I did this last night but now I'm stuck on B110. When I tried to flash update_full_hw_spcseas.zip my update restore failed and I got stuck in the bootloop again. I was able to dload B110 again so the phone is running but not sure how to get to B136 or B138 or even B158.

JJBTEXAS said:
Yes I did this last night but now I'm stuck on B110. When I tried to flash update_full_hw_spcseas.zip my update restore failed and I got stuck in the bootloop again. I was able to dload B110 again so the phone is running but not sure how to get to B136 or B138.
Click to expand...
Click to collapse
Do you have all apps and themes installed or they are missing?
To update use system update,try with wifi and 4g, there is 3 dots in the upper right click download latest package.

gm007 said:
Do you have all apps and themes installed or they are missing?
To update use system update,try with wifi and 4g, there is 3 dots in the upper right click download latest package.
Click to expand...
Click to collapse
I lost all the google apps and the keyboard when I tried to updated from B110 to B136 using step 7 "flash hw_data" but got it all back when with dloading back to B110.
I'm trying the updater now and it seems to be updating to B158! will update.

Update worked and I'm now on B158 which is awesome! The only thing that's odd now is that my MEID is 000000000000. I'm not sure if that's a big deal.
To update use system update,try with wifi and 4g, there is 3 dots in the upper right click download latest package.
Click to expand...
Click to collapse
Any reason to use steps 5 - 9 instead of doing the update from B110?

JJBTEXAS said:
Update worked and I'm now on B158 which is awesome! The only thing that's odd now is that my MEID is 000000000000. I'm not sure if that's a big deal.
Any reason to use steps 5 - 9 instead of doing the update from B110?
Click to expand...
Click to collapse
Step 5 to 9 is to restore the Missing application and data i recommend do this steps again.
If you have boot loop boot to stock recovery and do factory reset.

gm007 said:
Step 5 to 9 is to restore the Missing application and data i recommend do this steps again.
If you have boot loop boot to stock recovery and do factory reset.
Click to expand...
Click to collapse
Hmm. I don't think I'm missing any applications though. I have all the google apps, which is what I lost last time I tried.

JJBTEXAS said:
Hmm. I don't think I'm missing any applications though. I have all the google apps, which is what I lost last time I tried.
Click to expand...
Click to collapse
Did you tried a factory reset from settings?
If that didn't restore ur meid than maybe you need to flash the public data zip,will give you link later.

JJBTEXAS said:
Hmm. I don't think I'm missing any applications though. I have all the google apps, which is what I lost last time I tried.
Click to expand...
Click to collapse
sorry but can i ask if you have restore the oeminfo to c636?

eddmecha said:
sorry but can i ask if you have restore the oeminfo to c636?
Click to expand...
Click to collapse
Yes. I did the following:
* Unlock bootloader
* install twrp
1- restore oeminfo for C636 http://www.mediafire.com/?szws87sk7rrkqr6
2- download c636 offline firmware,and flash it from an sd card using 3 buttons method by dload folder. https://forum.xda-developers.com/mat...4/post70465883
3- factory reset from settings.
4-use system update to get the latest firmware.
Basically gm007's but skipping a few steps
The end result was a seemingly complete L29C636B158.

gm007 said:
Did you tried a factory reset from settings?
If that didn't restore ur meid than maybe you need to flash the public data zip,will give you link later.
Click to expand...
Click to collapse
Yes, I believe I did. Is there any reason for me to fix the meid?

JJBTEXAS said:
Yes, I believe I did. Is there any reason for me to fix the meid?
Click to expand...
Click to collapse
If everything is working fine no need, maybe later if you decide to rebrand to original usa version.

gm007 said:
If everything is working fine no need, maybe later if you decide to rebrand to original usa version.
Click to expand...
Click to collapse
That's what I was thinking. I might try another factory reset just to test it.

JJBTEXAS said:
That's what I was thinking. I might try another factory reset just to test it.
Click to expand...
Click to collapse
Could be cause u skiped step 5 there is a mismatch in system files.
The update you got via system update is a small update or full firmware?

gm007 said:
Could be cause u skiped step 5 there is a mismatch in system files.
The update you got via system update is a small update or full firmware?
Click to expand...
Click to collapse
Reset didn't solve it. I think the update was over 2gb so full firmware.

ajsmsg78 said:
When that happened to me I flashed the update_full_hw_spcseas.zip folder through dload (vol up + down + power) to get the phone booting again.
Click to expand...
Click to collapse
hi bro how do u manage that can u full explain ?

Sorry to resurrect the old thread but I am having the same problem with meid number all zeros. The phone seems to work fine except that I cannot get LTE or 4G on certain provider's. Mine is also the US version. What did you do to fix this issue?

[Solved] Soft brick after trying to upgrade to newest rom version

I'm also one of the fools that got his phone stuck in the boot... it boots up till the Huawei logo and after that nothing. I've tried several solutions but still no luck.
I've3 got the Nougast recovery from Bulywolf (or something) and i've tried flashing different roms but no luck so far. I also made the mistake to change the data partition from f2 to ext4... I guess that caused all the problems but how do i solve it?
It is actually doing my head in...

I managed to install the first file from the rollback tutorial... It said it was succesfull but now I'm still stuck seeing the Huawei logo... So I guess it didn't work
Edit: Managed to get in! But it says my version is NRD90M test-keys....

Chippie_83_ said:
I managed to install the first file from the rollback tutorial... It said it was succesfull but now I'm still stuck seeing the Huawei logo... So I guess it didn't work
Edit: Managed to get in! But it says my version is NRD90M test-keys....
Click to expand...
Click to collapse
1 : http://download-c1.huawei.com/download/downloadCenter?downloadId=93788&version=373426&siteCode=nl
2 : http://download-c1.huawei.com/download/downloadCenter?downloadId=93803&version=373438&siteCode=nl
put those in dload map at sdcard...first make the small file after let him reboot and flash the 1.68gb file also in erecovery.

I have a P9lite dead too
Hi guys i have a p9 lite in boot loop because i tried (cause i´m fool) to update from file in 3 buttons way, i don´t have frp unlocked and bootloader neither how can i fix this? the version i tried to update is the VNS-L23C605B329_DATA_VNS-L23_hw_la thanks!

Kcetin20 said:
1 : http://download-c1.huawei.com/download/downloadCenter?downloadId=93788&version=373426&siteCode=nl
2 : http://download-c1.huawei.com/download/downloadCenter?downloadId=93803&version=373438&siteCode=nl
put those in dload map at sdcard...first make the small file after let him reboot and flash the 1.68gb file also in erecovery.
Click to expand...
Click to collapse
I love you man! :highfive:
You are some sort of GOD to me now!
Hail to the king!
(In case you wonder: yes it works like a charm!)

djbeatmaker said:
Hi guys i have a p9 lite in boot loop because i tried (cause i´m fool) to update from file in 3 buttons way, i don´t have frp unlocked and bootloader neither how can i fix this? the version i tried to update is the VNS-L23C605B329_DATA_VNS-L23_hw_la thanks!
Click to expand...
Click to collapse
Are you sure you have right phone version VNS-L23?
You wanted to update to B329 which is Android 7.0 right? If so, put the right package to downgrade to MM and then try three-buttons way.

yeah my device is the VNS-L23C605B120 and i can´t find any update.app that could work, the device stay in logo mode when I tried to downgrade it or reflash it..
Volenir said:
Are you sure you have right phone version VNS-L23?
You wanted to update to B329 which is Android 7.0 right? If so, put the right package to downgrade to MM and then try three-buttons way.
Click to expand...
Click to collapse

djbeatmaker said:
yeah my device is the VNS-L23C605B120 and i can´t find any update.app that could work, the device stay in logo mode when I tried to downgrade it or reflash it..
Click to expand...
Click to collapse
I can't downgrade to 6.0 It says that my package it;s not compatible with my phone... I'm from Romania, but I have a VNS-L31C432B336 that it's registered in UK..

Hello there
Do you have access to TWRP or Revolutionary recovery? If so, you can check on google for "Huawei P9 Lite oeminfo", downloadit, flash zip via recovery(TWRP or Revolutionary), then try to force update you phone by holding all 3 buttons when phone is booting up, make sure that you have update.app in dload folder on sdcard.
DON'T FORGET TO SAVE YOUR BOOTLOADER UNLOCK CODE!!!

Kcetin20 said:
1 : http://download-c1.huawei.com/download/downloadCenter?downloadId=93788&version=373426&siteCode=nl
2 : http://download-c1.huawei.com/download/downloadCenter?downloadId=93803&version=373438&siteCode=nl
put those in dload map at sdcard...first make the small file after let him reboot and flash the 1.68gb file also in erecovery.
Click to expand...
Click to collapse
I was in Nougart on test keys, so i downloaded the first file, installed it and it restarted my phone. I set everything back up and checked I was still on test keys.
Do I have to flash the larger second file as well?

djbeatmaker said:
yeah my device is the VNS-L23C605B120 and i can´t find any update.app that could work, the device stay in logo mode when I tried to downgrade it or reflash it..
Click to expand...
Click to collapse
Hi bro!
Could you find something for your version? I also have the same model and I have a hard brick, could you solve your mistake?
Could you give me the official firmware link for this model (VNS-L23C605B120) please?
THAANKS!!

well, here is some you can try, find a downgrade update.app, later re flash it with the according restore update.app, it will end to 97% but it`ll work enough to start the cellphone and install the custom twrp recovery and make an good install.

Chippie_83_ said:
I managed to install the first file from the rollback tutorial... It said it was succesfull but now I'm still stuck seeing the Huawei logo... So I guess it didn't work
Edit: Managed to get in! But it says my version is NRD90M test-keys....
Click to expand...
Click to collapse
Hi I'm on your same version NRD90M and I also know that now you solved the problem but, the way you solved it doesn't work for me, I installed the first file but the second one failed... Can you please help Me?

Chippie_83_ said:
I managed to install the first file from the rollback tutorial... It said it was succesfull but now I'm still stuck seeing the Huawei logo... So I guess it didn't work
Edit: Managed to get in! But it says my version is NRD90M test-keys....
Click to expand...
Click to collapse
Hello, could you please tell me how you managed to get in.! my VNS-L21 has stuck on the Huawei logo.. and can't do nothing. I can't even turn my phone off. :good:

willreth21 said:
hello, could you please tell me how you managed to get in.! My vns-l21 has stuck on the huawei logo.. And can't do nothing. I can't even turn my phone off. :good:
Click to expand...
Click to collapse
press vol down and power button for some time. It will work. I have the same model and inhave managed to get out of several bricks by using this method

Hola a todos.alguien logro pasar del wifi+ sin la opcion de DC PHOENIX??

P8 Lite strange brick

Hello i'm a new user of this forum and i'm italian so sorry for my bad english. I'm an enthusiast android user.
now i have a perfectly working p9 lite but 1 year ago i had bricked my old p8 lite and today i returned to work on it but the problem are the same as before.
1 year ago the android 5 lollipop was the latest for the p8 lite and i rooted with no problem with random root application unfortunally maybe kingroot...... but all was ok for months. after i updated my p8 lite to android 6 mm and i tried to root, after many tryes i sucsessfull root my device, but the xda framework didnt work at all at that time the mm version was too new. so i tried to rollback to android 5, but i didn t know about a correct rollback update, so i flashed android 5's boot, cust, recovery and system.img via fastboot. i saw that the sim didn't recognised and so i discovered that the imei was lost........ And believe it or not, this is not entirely the problem.... after that i was in panic and i went to assistance and there they tell me that the motherboard was to replace.... so for the cost of the entire phone i decided to not pay. after i tried to follow so many guides my friend, you not even any ideas.... but one guide seems to work, i had to flash b049 or b52 (don not remember) and after my b190 but at the b49/b52 it give balong problem, after i fixed with a vendor little flash but the imei was completely gone in every versions..... i was sad... but while a flash and another thi biggest problem born.......... the phone bootloop, but NOT a normal bootloop, it starts correctly every versions but after 10 seconds of a working os ( i can go in settings, start application ec but it give up and restart totally not explayned.... i've formatted 1000 times and the force update fail or bootloop itself at 10 or 11% (10seconds....) same with recovery... only in rescue/fastboot mode it do not restart after 10 seconds and in the twrp 3.0.2 that i tried to flash every modded firmware in zip and at system flash it restart (seems like the 10 second stuff). now the imei problem is not a request because now i've the p9 lite and i dont need the phone things but the system.... its unplayble with the 10 secodns restart loop.... please is hard but HELP.

Franseven said:
Hello i'm a new user of this forum and i'm italian so sorry for my bad english. I'm an enthusiast android user.
now i have a perfectly working p9 lite but 1 year ago i had bricked my old p8 lite and today i returned to work on it but the problem are the same as before.
1 year ago the android 5 lollipop was the latest for the p8 lite and i rooted with no problem with random root application unfortunally maybe kingroot...... but all was ok for months. after i updated my p8 lite to android 6 mm and i tried to root, after many tryes i sucsessfull root my device, but the xda framework didnt work at all at that time the mm version was too new. so i tried to rollback to android 5, but i didn t know about a correct rollback update, so i flashed android 5's boot, cust, recovery and system.img via fastboot. i saw that the sim didn't recognised and so i discovered that the imei was lost........ And believe it or not, this is not entirely the problem.... after that i was in panic and i went to assistance and there they tell me that the motherboard was to replace.... so for the cost of the entire phone i decided to not pay. after i tried to follow so many guides my friend, you not even any ideas.... but one guide seems to work, i had to flash b049 or b52 (don not remember) and after my b190 but at the b49/b52 it give balong problem, after i fixed with a vendor little flash but the imei was completely gone in every versions..... i was sad... but while a flash and another thi biggest problem born.......... the phone bootloop, but NOT a normal bootloop, it starts correctly every versions but after 10 seconds of a working os ( i can go in settings, start application ec but it give up and restart totally not explayned.... i've formatted 1000 times and the force update fail or bootloop itself at 10 or 11% (10seconds....) same with recovery... only in rescue/fastboot mode it do not restart after 10 seconds and in the twrp 3.0.2 that i tried to flash every modded firmware in zip and at system flash it restart (seems like the 10 second stuff). now the imei problem is not a request because now i've the p9 lite and i dont need the phone things but the system.... its unplayble with the 10 secodns restart loop.... please is hard but HELP.
Click to expand...
Click to collapse
Do you have access to rescue mode/fastboot? Maybe flashing TWRP would help
P.S.-- DON'T EVER RUN KINGROOT ON P8LITE; MAYBE IT WILL SUCCESS, BUT YOUR DEVICE WILL BE MESSED UP

XTutorials said:
Do you have access to rescue mode/fastboot? Maybe flashing TWRP would help
Click to expand...
Click to collapse
yes, Maybe I was not clear but rescue mode is the only one where no automatic restart occurs. I twrp it and tried it but it did not help. If you are expert please give me more advice

Franseven said:
yes, Maybe I was not clear but rescue mode is the only one where no automatic restart occurs. I twrp it and tried it but it did not help. If you are expert please give me more advice
Click to expand...
Click to collapse
I have some questions:
1. What means"I twrp it" ? I know you're italian but please more details; did you flashed it succesfully?
More, I want a response to this question first

XTutorials said:
I have some questions:
1. What means"I twrp it" ? I know you're italian but please more details; did you flashed it succesfully?
More, I want a response to this question first
Click to expand...
Click to collapse
I successfully flashed the twrp recovery and trying to flash the zip while the firmware reboots while flashing the system

Franseven said:
I successfully flashed the twrp recovery and trying to flash the zip while the firmware reboots while flashing the system
Click to expand...
Click to collapse
Try here it might work

cristi.blidariu said:
Try here it might work
Click to expand...
Click to collapse
in fastboot mode hicare don't see my device, If you think that this particular version b132 changes something I try but I think it will restart every 10 seconds as the others ..

Franseven said:
I successfully flashed the twrp recovery and trying to flash the zip while the firmware reboots while flashing the system
Click to expand...
Click to collapse
For this fix, you should have and sd card
Download sokkoban's emui 4.0.3 B596, copy to sd card, erase everything in TWRP (cache, dalvik, data, system, internal storage), then flash the .zip you copied to the sd card.

XTutorials said:
For this fix, you should have and sd card
Download sokkoban's emui 4.0.3 B596, copy to sd card, erase everything in TWRP (cache, dalvik, data, system, internal storage), then flash the .zip you copied to the sd card.
Click to expand...
Click to collapse
Also by deleting everything in the twrp recovery the other .zip phones will restart as twrp is copying system, with b596 should not happen?

Franseven said:
Also by deleting everything in the twrp recovery the other .zip phones will restart as twrp is copying system, with b596 should not happen?
Click to expand...
Click to collapse
Maybe, try

XTutorials said:
Maybe, try
Click to expand...
Click to collapse
nope.. i've tried right now and it do same thing

Franseven said:
nope.. i've tried right now and it do same thing
Click to expand...
Click to collapse
Try to erase everything in twrp -->>advanced wipe-->> tick everything and click wipe.
Then flash latest TWRP (3.1.0-1) And try again flashing B596

XTutorials said:
Try to erase everything in twrp -->>advanced wipe-->> tick everything and click wipe.
Then flash latest TWRP (3.1.0-1) And try again flashing B596
Click to expand...
Click to collapse
ok done.
install zip
successful
but down i see
E:unknown command [errno]
dalvik wiped
now reboot
and....splash logo ok...reboot.......splash... again.. yes bootloop, but now seems normal
my initiative , i m going to hard resetnow
factory reset done
reboot
bootloop again my friend.
EDIT:
tried again, after 3 bootloop emui show to load but restart again. after that emui load and while the language selection it shutdown automatically, this time don't restart. we see tomorrow

Franseven said:
ok done.
install zip
successful
but down i see
E:unknown command [errno]
dalvik wiped
now reboot
and....splash logo ok...reboot.......splash... again.. yes bootloop, but now seems normal
my initiative , i m going to hard resetnow
factory reset done
reboot
bootloop again my friend.
EDIT:
tried again, after 3 bootloop emui show to load but restart again. after that emui load and while the language selection it shutdown automatically, this time don't restart. we see tomorrow
Click to expand...
Click to collapse
Oh my god.... that error is just a log, everything works, don't panic so again.
Go to twrp-- wipe-- advanced wipe-- tick(check) all and clikc wipe
reflash twrp 3.1.0-1,
flash again zip, and don't care about that error, that means it succesfully flashed the rom

XTutorials said:
Oh my god.... that error is just a log, everything works, don't panic so again.
Go to twrp-- wipe-- advanced wipe-- tick(check) all and clikc wipe
reflash twrp 3.1.0-1,
flash again zip, and don't care about that error, that means it succesfully flashed the rom
Click to expand...
Click to collapse
i've done what your saying, and the result is that when the device reach the boot logo starts a sort of timer, and after 10 seconds the os crash in every case with every firmware... thats not help

Franseven said:
i've done what your saying, and the result is that when the device reach the boot logo starts a sort of timer, and after 10 seconds the os crash in every case with every firmware... thats not help
Click to expand...
Click to collapse
Then I'm done... I don't know man other fixes. I've read os kinda same type of hard brick that if you disconnect the battery and plug it in back does something

XTutorials said:
Then I'm done... I don't know man other fixes. I've read os kinda same type of hard brick that if you disconnect the battery and plug it in back does something
Click to expand...
Click to collapse
in the p8 lite the battery is unremovible, i must try with deassemble tutorial?
but have you ear of this type of bootloop? with this strange timer crash?
EDIT:
i just followed a guide for battery sostitution, i've unplagged and replugged and the "timer boot loop/ os timer crash" continue.
now i m trying to unplug for 5 mins to do safe.
Ok done. same bad result.. please if you can't help, make this post still alive invite if you have expert friend, i'm going mad.

I think it's problem with the hardware, that the power button pressed continuously.
Because in our phone if you keep pressing it for 10 seconds it will force restart.
Actually I don't know about twrp flashing problem, if it also do the same or not...
you may check the power button..

salembream said:
I think it's problem with the hardware, that the power button pressed continuously.
Because in our phone if you keep pressing it for 10 seconds it will force restart.
Actually I don't know about twrp flashing problem, if it also do the same or not...
you may check the power button..
Click to expand...
Click to collapse
oh i thought that... i can try to dissassemble but i hope to not damage the device..
wait a minute... but when i click the power button i can hear sonor "clak" don't seems to be pressed costantly..
EDIT:
its definetely not a power button problem, i dissassembled, i replug the battery, so pressed power button, while booting i unplugged the contact of the power button and volume +- so i cant even seems pressed. same happened after 10 seconds it restart. sorry bad english