Related
Hello Xda Devs. I'm really new to android phones (I just switched from windows phone lately to try on low end android phone first). Since I heard that rooting are pretty awesome, I tried to root my phone by following these steps that I found over the net.
"This stage will be done on your phone so, switch your PC off.
1) Open Settings, go to Applications then Development and check USB Debugging.
2) Now reboot your phone and press VOL Up + Home + Power together during the booting.
3) The Recovery Mode will be opened. If you do not see the recovery mode then try the method no. 2 again.
4) In recovery mode use the Vol Up and Down buttons to navigate and the Home button to select.
5) Now select “Install Zip from SD card.”
6) Then select “Choose Zip from SD card” and find out and select the Zip previously downloaded.
7) The download process will start and will take more than 10 minutes.
8) After the completion of the update follow the next steps on recovery mode.
9) Then select “Wipe Data/Factory Reset”.
10) Now enable “Wipe Cache Partition”.
11) After that select “++++Go Back++++”
12) Reboot the phone and you shall get it rooted. "
I skipped Step 9 to 11. [Note: I didn't wipe out any data to prevent any data loss through the process). I followed the steps and managed to root my phone.
Then, I tried to download ICS for my SGY by following steps on another blog to change my phone to ICS. The steps given are :
"Process to Download Android Ice Cream Sandwich 4.0 for Galaxy Y
Download Android Ice Cream Sandwich 4.0 from here.
-Transfer this file to your Samsung Galaxy Y. It can be done by connecting device with computer via USB cable.
-If you are done with above, then next step is to boot your device to Recovery Mode. It can be done by pressing Volume Up +Volume Down + Power buttons together. Soon, an Android logo will surface on your device’s screen. This is the proof that you are in the Recovery Mode.
-Now navigate to the option that reads “install zip from SD card”. Don’t know how to navigate? Use Volume Keys!
-In the list that comes up, select the ROM file that you downloaded in the first step.
-Confirm the installation, and then wait for it to get finished.
-Go to main menu and select ‘reboot system now’.
-Your Samsung Galaxy Y will restart now. "
So far so good, then when it restart, my phone stuck on the animation mode. (Cynogenmod 9 animation).
Other than what I mention above, I did not install anything else and now I'm really confused. I'll attach a picture of the animation that I said. Please help. Thanks.
Before installing any custom rom u should always wipe data.
NewGuyArena said:
Hello Xda Devs. I'm really new to android phones (I just switched from windows phone lately to try on low end android phone first). Since I heard that rooting are pretty awesome, I tried to root my phone by following these steps that I found over the net.
"This stage will be done on your phone so, switch your PC off.
1) Open Settings, go to Applications then Development and check USB Debugging.
2) Now reboot your phone and press VOL Up + Home + Power together during the booting.
3) The Recovery Mode will be opened. If you do not see the recovery mode then try the method no. 2 again.
4) In recovery mode use the Vol Up and Down buttons to navigate and the Home button to select.
5) Now select “Install Zip from SD card.”
6) Then select “Choose Zip from SD card” and find out and select the Zip previously downloaded.
7) The download process will start and will take more than 10 minutes.
8) After the completion of the update follow the next steps on recovery mode.
9) Then select “Wipe Data/Factory Reset”.
10) Now enable “Wipe Cache Partition”.
11) After that select “++++Go Back++++”
12) Reboot the phone and you shall get it rooted. "
I skipped Step 9 to 11. [Note: I didn't wipe out any data to prevent any data loss through the process). I followed the steps and managed to root my phone.
Then, I tried to download ICS for my SGY by following steps on another blog to change my phone to ICS. The steps given are :
"Process to Download Android Ice Cream Sandwich 4.0 for Galaxy Y
Download Android Ice Cream Sandwich 4.0 from here.
-Transfer this file to your Samsung Galaxy Y. It can be done by connecting device with computer via USB cable.
-If you are done with above, then next step is to boot your device to Recovery Mode. It can be done by pressing Volume Up +Volume Down + Power buttons together. Soon, an Android logo will surface on your device’s screen. This is the proof that you are in the Recovery Mode.
-Now navigate to the option that reads “install zip from SD card”. Don’t know how to navigate? Use Volume Keys!
-In the list that comes up, select the ROM file that you downloaded in the first step.
-Confirm the installation, and then wait for it to get finished.
-Go to main menu and select ‘reboot system now’.
-Your Samsung Galaxy Y will restart now. "
So far so good, then when it restart, my phone stuck on the animation mode. (Cynogenmod 9 animation).
Other than what I mention above, I did not install anything else and now I'm really confused. I'll attach a picture of the animation that I said. Please help. Thanks.
Click to expand...
Click to collapse
go to recovery mode and wipe cache and data
MuSaddiq1410 said:
Before installing any custom rom u should always wipe data.
Click to expand...
Click to collapse
I didn't known that. So, what should I do now? My phone have been stuck on the animations for hours.
sangalaxy said:
go to recovery mode and wipe cache and data
Click to expand...
Click to collapse
Just done it. Should I reboot now ?
NewGuyArena said:
I didn't known that. So, what should I do now? My phone have been stuck on the animations for hours.
Click to expand...
Click to collapse
do as I said
switch off the phone take out the battery then put it on
press vol up+hom+power button you will go into recovery mode
wipe data and cache then reboot
NewGuyArena said:
I didn't known that. So, what should I do now? My phone have been stuck on the animations for hours.
Click to expand...
Click to collapse
Use odin to flash stock rom. Get odin and stock rom of ur region from this thread.
NewGuyArena said:
I didn't known that. So, what should I do now? My phone have been stuck on the animations for hours.
Click to expand...
Click to collapse
download any c.rom. . Wipe data and cache dn instal rom. . Also u can flash back to stock using odin.
To start off with we have no official ics for our device
there is cm9 but nothing works on it other than it boots
next to install any custom rom
go into cwm
wipe data wipe cache wipe system
Mount data mount cache mount system
flash rom zip
some roms for example cm7 require a specific kernel like percy#2 and extra steps
follow any instructions on the op of rom thread
NewGuyArena said:
I didn't known that. So, what should I do now? My phone have been stuck on the animations for hours.
Click to expand...
Click to collapse
Nothing wrong with the installation steps
U did everyhtng rite......but the thing is u didn't installed the suitable CM9 kernel
That is why it is said be sure that u did everything rite
Things u can do now
1-Flash Stock rom via odin,it will make ur phone as a fresh newly bought phone (browse for odin flash guide and stock firmware for galaxy y)
2-the easiest thing-Flash CM9 kernel I.e white kernel via odin.....and then ics will surely boot on ur sgy
^ is of no use bcoz ics cm9 has got many bugs its yet to be stable
Phew! That was a long explaination........
I need cookies now....I am hungry.....
Thanks everyone for the superb fast reply. Since ICS is not working so, I decided to use Odin to flashback to my normal version firmware. So, is there steps on how to use Odin ? (I've just installed a zip file of the firmware and also Odin)
sangalaxy said:
go to recovery mode and wipe cache and data
Click to expand...
Click to collapse
Like @-calibian666- said u've been a thanks collector all around.....don't guide people wrongly just. For thanks and increase ur post count....thanks really doesn't matter
D4rkSh4dow said:
Like @-calibian666- said u've been a thanks collector all around.....don't guide people wrongly just. For thanks and increase ur post count....thanks really doesn't matter
Click to expand...
Click to collapse
mm ok sir but I didn't posted it for thanks
as per the question he didn't wipe the data or cache before and after flashing cm9
so I just asked him to do that AFAIK it is not a wrong guide
sangalaxy said:
go to recovery mode and wipe cache and data
Click to expand...
Click to collapse
Like @-calibian666- said u've been a thanks collector all around.....don't guide people wrongly just. For thanks and increase ur post count....thanks really doesn't matter
Now, is there any link to guide me on how to use Odion and so on ? And also, does USB debugging works on my current 'unstable-ICS' ? I need to connect to my laptop.
NewGuyArena said:
Now, is there any link to guide me on how to use Odion and so on ? And also, does USB debugging works on my current 'unstable-ICS' ? I need to connect to my laptop.
Click to expand...
Click to collapse
use this guide LINK
NewGuyArena said:
Thanks everyone for the superb fast reply. Since ICS is not working so, I decided to use Odin to flashback to my normal version firmware. So, is there steps on how to use Odin ? (I've just installed a zip file of the firmware and also Odin)
Click to expand...
Click to collapse
Steps to unbrick device via odin
-Install samsung USB drivers
-Turn off ur phone into download mode(voldown+power+home)
-Plug in ur device via usb cable
-u will see a yellow box says about ur com port....
-if that appers go ahead,if not....the drivers isn't installed(uninstall and reinstall again)
-select PDA browse for ur firmware package the folder in which it is extracted
-put the files according...CSC,MODEM,PDA
-Click Start
-wait till its done
-Sucess
Sorry for late reply....I was studying...
I need more cookies
D4rkSh4dow said:
Steps to unbrick device via odin
-Install samsung USB drivers
-Turn off ur phone into download mode(voldown+power+home)
-Plug in ur device via usb cable
-u will see a yellow box says about ur com port....
-if that appers go ahead,if not....the drivers isn't installed(uninstall and reinstall again)
-select PDA browse for ur firmware package the folder in which it is extracted
-put the files according...CSC,MODEM,PDA
-Click Start
-wait till its done
-Sucess
Sorry for late reply....I was studying...
I need more cookies
Click to expand...
Click to collapse
Well, your instructions are much more easier to understand rather the original post. I was a bit confused there... Hahaha... but everything back to normal now. Now, I've load of updating and downloads to does back.
Thanks everyone for the great help.
NewGuyArena said:
Well, your instructions are much more easier to understand rather the original post. I was a bit confused there... Hahaha... but everything back to normal now. Now, I've load of updating and downloads to does back.
Click to expand...
Click to collapse
I am always there to help you.......next guide on its way
Hello guys,
i have decided to make a complete (as compete as possible) guide about flashing Custom ROMs because i didnt find any for our device.
I will try to keep this guide as clear as possible for better understanding and quick flashing!THE FOLLOWING METHODS HAVE BEEN TESTED A LOT OF TIMES, IN DIFFERENT DEVICES, AND THE RESULTS WERE SUCCESFULL!
Code:
[SIZE="3"][CENTER][COLOR="Red"]Your warranty is now void.[/COLOR]
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this GUIDE
before you begin the whole procedure! YOU are choosing to make these modifications at YOUR OWN RISK.[/CENTER]
[/SIZE]
BEFORE YOU PROCEED WITH THE FOLLOWING METHODS, IT IS HIGHLY RECOMMENDED THAT YOU MAKE A NANDROID BACKUP OF ALL YOUR DATA.(REQUIRES ROOT ACESS!)
PRE-REQUIREMENTS (INCLUDING CUSTOM RECOVERY AND ODIN METHODS):
1) Drivers. Here you can find the most recent(As updated from the site owner)driver package for your device (skip this step if you have already installed them). Download
2) A device with TWRP recovery installed. (If you want to flash your ROM via custom recovery)
If it happens that your device is not rooted, you can follow the ODIN method mentioned down below or you can follow this guide on how to flash a TWRP recovery!
3) ODIN. (If you want to flash your ROM via computer)
4) IMPORTANT: Make sure your battery is at least 90% charged!
5) OPTIONAL: Make sure your have downloaded the lattest GAPPS.zip.
6) OPTIONAL: Make sure your have downloaded the lattest SUPERSU.zip.
7) Some patience.
Changelog:
[16/02/2016(Minnor Improvements)] General cleanup.
[30/01/2016(Minnor Additions)] Added an #INDEX#.
[27/01/2016(Important Changes)] Changed some parts at the UNBRICK method.
[22/01/2016(Minnor Improvements)] Updated the ODIN method.
[20/01/2016(Major Additions)] New post: Unbrick, added.
[18/01/2016(Minnor Improvements)] Updated the drivers package.
[28/11/2015(Important Improvements)] Rewrote and added some parts on the Custom recovery and Odin guides.
[21/10/2015(Minnor Changes)] Changed the expresion on some parts. It should be easier to follow now.
#INDEX#
NANDROID BACKUP
CUSTOM RECOVERY METHODS
ODIN METHOD
UNBRICK
Credits:
@Android-Andi for his custom TWRP recovery and how to flash it method.
IF YOU FOUND THIS GUIDE USEFULL OR IT HAS HELPED YOU, CONSIDER VOTING ON THE POLL AND PRESSING THE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
BUTTON.
NANDROID BACKUPNOTE: If the backup's android version was on an android version older than the one you are trying to flash DO NOT FLASH IT.(pss. it does no harm, just it is worthless)
NOTE: Backup must be done before wiping any partitions.
NOTE: In the following methods i will be using TWRP as custom recovery.
BACK UP PROCEDURE
1) Boot into recovery mode. (In order to do so, press Volume Up (+), Homebutton and the Power-Button at the same time untill you see the S3 Mini Logo, then release the Power-Button and keep pressing Volume Up (+) and the Homebutton untill you see the TWRP logo!)
2) From the main menu of the TWRP press the Backup button.
3) Then tick the partitions that you want to backup (Preferably Boot, Data and System).
4) Make sure that your destination folder is on your external sd-card. (If you dont have micro a sd card, save it on the internal storage and then transfer the files to a computer.
5) Choose a name or leave the auto-generated one.
6) Enable encryption, so others can't install your backup with all of your apps, contacts, accounts etc.
7) Swipe to Back Up.
8) DONE!
CUSTOM RECOVERY METHODS
NOTE: In the following methods i will be using TWRP as custom recovery.
NOTE: The following methods are completely different from each other, thus you should NOT try to mix them.
METHOD NO.1 (The clean installation) RECOMMENDEDIt is recomended but not necessary to perform a FORMAT DATA wipe before wiping the bellow partitions.
As you may have heard the clean installation, is a method that wipes all your device's DALVIK CACHE, SYSTEM, CACHE, DATA and INTERNAL STORAGE partitions.
YOU DONT HAVE TO WORRY ABOUT MAKING THE PHONE UNSUABLE.
By wiping SYSTEM partition, you only wipe the old ROM's files. The new ROM will genarate new proper files.
By wiping DALVIK CACHE and CACHE, you just clean the old " mess" of installed apps etc.
By wiping INTERNAL STORAGE and DATA you DO delete all of your personal files, apps, phone contacts etc.
WIPE PROCEDURE
1) From the main menu of the TWRP press the Wipe button.
If you dont want to follow the step 2 go to step 4.
2) OPTIONAL BUT RECOMENDED: Then press the Format Data button.
2a) Go back.
2b) From the main menu of the TWRP press the Reboot button.
2c) Then press the Recovery button.
After that your device will reboot by it self into recovery mode, continue.
3) From the main menu of the TWRP press the Wipe button.
4) Then press the Advanced Wipe button.
5) Tick the Dalvik Cache, System, Cache, Data, Internal Storage.
BE CAREFULL, DO NOT WIPE your Micro SD Card! Otherwise you will not be able to install your ROM.
6) Swipe to Wipe.
7) DONE!
INSTALL PROCEDURE
1) From the main menu of the TWRP press the Install button.
2) Browse to your micro sd card.
3) Find the ROM.zip file you want to install.
4) Press on it.
5) Then Swipe to Confirm Flash.
OPTIONAL STEPS FOR GAPPS PACKAGE. IF YOU DONT WANT TO INSTALL IT CONTINUE TO STEP 8
6a) From the main menu of the TWRP press the Install button.
6b) Browse to your micro sd card.
6c) Find your gapps.zip package.
6d) Press on it.
6e) Then Swipe to Confirm Flash.
OPTIONAL STEPS FOR SUPERSU PACKAGE. IF YOU DONT WANT TO INSTALL IT CONTINUE TO STEP 8
7a) From the main menu of the TWRP press the Install button.
7b) Browse to your micro sd card.
7c) Find your supersu.zip package.
7d) Press on it.
7e) Then Swipe to Confirm Flash.
8) After the installation is done, press the Reboot System button that will show up on the screen.
9) DONE!
METHOD NO.2 (The "dirty" installation) NOT RECOMENDEDWith this method you DO NOT wipe your INTERNAL STORAGE nor your DATA. You only wipe the absolutely unnecessary files from the old rom so the new rom can genarate new ones.
As you may have heard the "dirty" installation, is a method that only wipes DALVIK CACHE and CACHE.
By wiping DALVIK CACHE and CACHE, you just clean the old " mess" of installed apps etc.
NOTE: THE WIPE PROCEDURE MUST BE APPLYED BEFORE AND AFTER THE INSTALLATION
WIPE PROCEDURE
1) From the main menu of the TWRP press the Wipe button.
2) Then press the Advanced Wipe button.
3) Tick Dalvik Cache and Cache.
4) Swipe to Wipe.
5) After the Wipe is done, press the Back button that will show up on the screen.
6) From the main menu of the TWRP, press the Reboot button.
7) Then press the Recovery button.
8) DONE!
INSTALL PROCEDURE
1) From the main menu of the TWRP press the Install button.
2) Browse to your micro sd card.
3) Find the ROM.zip file you want to install.
4) Press on it.
5) Then Swipe to Confirm Flash.
OPTIONAL STEPS FOR GAPPS PACKAGE. IF YOU DONT WANT TO INSTALL IT CONTINUE TO STEP 8
6a) From the main menu of the TWRP press the Install button.
6b) Browse to your micro sd card.
6c) Find your gapps.zip package.
6d) Press on it.
6e) Then Swipe to Confirm Flash.
OPTIONAL STEPS FOR SUPERSU PACKAGE. IF YOU DONT WANT TO INSTALL IT CONTINUE TO STEP 8
7a) From the main menu of the TWRP press the Install button.
7b) Browse to your micro sd card.
7c) Find your supersu.zip package.
7d) Press on it.
7e) Then Swipe to Confirm Flash.
7f) After the Flashing is complete, press the Back button that will show up on the screen.
Repeat the WIPE PROCEDURE and after it is done continue from here to step 8.
8) From the main menu of the TWRP press the Reboot button
9) Then press the System button.
10) DONE!
ODIN METHOD
NOTE: With the following method you can't install Gapps. If you wish to install GApps you must install them with a custom recovery and by following the FLASH USING CUSTOM RECOVERY METHODS post. Same goes for the super su.
INSTALL PROCEDURE
1) Boot into Download mode. (In order to do so, press Volume Down (-), Homebutton and the Power-Button at the same time untill you see the Green warning screen. Then press the Volume Up).
2) Connect the device to the computer.
3) Open Odin on the computer.
4) Check if your device is being recognised on the top left of the Odin window. There should be displayed something like (e.x. 0:[COM3]). (If nothing is displayed, you propably didn't install the Drivers or you installed the wrong ones)
5) Make sure that only Auto Reboot and F.Reset time are ticked.
6) Press ONLY the PDA button.
7) Browse to your downloaded file (e.x. ROM.tar.md5).
8) Select it.
9) Press Start.
10) Wait untill the device reboots and on the top left is displayed one green box saying PASS!.
11) Unplug the device from the computer.
12) Immediately remove the cover and take out the battery.
13) Wait 5 secs and then put it back again.
14) Boot into recovery mode. (In order to do so, press Volume Up (+), Homebutton and the Power-Button at the same time untill you see the S3 Mini Logo, then release the Power-Button and keep pressing Volume Up (+) and the Homebutton)
15) Wipe data/factory reset.
16) Wipe Cache partition.
17) Press reboot system now.
18) DONE!
UNBRICK
NOTE: Please be sure that your device is bricked. To know if your device is bricked, your device should not boot into your current ROM at all and at some cases not even on (Custom) recovery. In other words you suffer from what is called bootloop.
If you are able to boot into your already flashed custom recovery use the FLASH USING CUSTOM RECOVERY METHODS and flash your custom ROM to regain access to the phone.
If you can not boot into your custom recovery but you can boot in download mode the problem is repairable. Be sure that you have the original recovery installed before you flash the Stock ROM because some roms don't include it and it may cause some issues.
If you can not even boot in download mode then your device is hard bricked and you must use an usb jig in order to make your device boot into download mode(ONLY) again. If at the end, you still can not boot into download mode then there is nothing you can do from a software-side
Download the stock rom you need form here: www.sammobile.com and unzip it on your computer.
UNBRICK PROCEDURE
1) Boot into Download mode. (In order to do so, press Volume Down (-), Homebutton and the Power-Button at the same time untill you see the Green warning screen. Then press the Volume Up).
2) Connect the device to the computer.
3) Open Odin on the computer.
4) Check if your device is being recognised on the top left of the Odin window. There should be displayed something like (e.x. 0:[COM3]). (If nothing is displayed, you propably didn't install the Drivers or you installed the wrong ones)
5) Make sure that only Auto Reboot and F.Reset time are ticked.
6) Press ONLY the PDA button.
7) Browse to your downloaded file (e.x. ROM.tar.md5).
8) Select it.
9) Press Start.
10) Wait untill the device reboots and on the top left is displayed one green box saying PASS!.
11) Unplug the device from the computer.
12) Immediately remove the cover and take out the battery.
13) Wait 5 secs and then put it back again.
14) Boot into recovery mode. (In order to do so, press Volume Up (+), Homebutton and the Power-Button at the same time untill you see the S3 Mini Logo, then release the Power-Button and keep pressing Volume Up (+) and the Homebutton)
15) Wipe data/factory reset.
16) Wipe Cache partition.
17) Press reboot system now.
18) DONE!
If everything went as it should you should now have stock rom with stock recovery installed.
In the ODIN method you dont mention how to install Gapps. Please explain me how to install Gapps with the odin method. And also i have a question... if I will use the odin method i will have root after installation?
SausageReunion said:
In the ODIN method you dont mention how to install Gapps. Please explain me how to install Gapps with the odin method. And also i have a question... if I will use the odin method i will have root after installation?
Click to expand...
Click to collapse
The most known and safe (in a way) method is flashing your ROM with a Custom Recovery which i highly recommend [also you dont mess alot with the binary counter that way(if you dont know what this is , please google it)], but if you want to go with the Odin method that's ok with me.
About GApps: In actually fact you can't flash GApps with Odin. GApps were created only be to flashed with a Custom Recovery(whether this is TWRP or CWM).
My suggestions are that after you flash your desired ROM with the Odin method there are two options:
1)You flash a Custom Recovery via Odin and then you use the guide from above(FLASH USING CUSTOM RECOVERY METHODS) and only follow the steps from 6a to 6e and then only the 8th step.
About the Root Access after flashing with Odin: That depends only from ROM that you flashed. If you want root access and your ROM does not support native Root Access you must install a custom recovery and from there flash the supersu.zip file.
NOT ALWAYS AVAILABLE:After you flashed your rom via Odin (and taking into consideration that you dont have a custom recovery) you should enable ROM's native root access managment tool. From there you can experiment as you like.
I hope i helped good luck and play it safe .
Which is the best custom ROM for s3 mini GT-I8190
Sent from my Sparkle V using Tapatalk
Hello! Please can someone tell me why when I install a ROM on my s3 mini with TWRP i t finishes too fast. For about 5-10 seconds. Is this a corrupted file. I have a cm 12.1 and I wanted to install a fusionkat ROM yesterday but this happens and I restored my cm
Rizan Mohammed said:
Which is the best custom ROM for s3 mini GT-I8190
Sent from my Sparkle V using Tapatalk
Click to expand...
Click to collapse
Really you cant define which one is the best. All of the roms that have been ported/created from our developers here, are great. It really depends on your personal liking.
marti2003 said:
Hello! Please can someone tell me why when I install a ROM on my s3 mini with TWRP i t finishes too fast. For about 5-10 seconds. Is this a corrupted file. I have a cm 12.1 and I wanted to install a fusionkat ROM yesterday but this happens and I restored my cm
Click to expand...
Click to collapse
Fusionkat ROM is a stock rom, so in order to flash it you have to use the odin method from the guide that i wrote on this page. Stock roms can only be flashed with Odin.
Hi btw can i flash rom for i8190 for i8190n?
I think its better if dalvik cache & cache will be cleaned again after installation and before rebooting the system in the Clean Installation
mangkoeboemi said:
Hi btw can i flash rom for i8190 for i8190n?
Click to expand...
Click to collapse
If you mean whether or not you are able to flash a rom intented for i8190 on a i8190N the answer is yes.
dev.wes07 said:
I think its better if dalvik cache & cache will be cleaned again after installation and before rebooting the system in the Clean Installation
Click to expand...
Click to collapse
I think it makes no difference since you delete every thing and also reboot the device after you wiped.
Which method do I use when I don't have rooted device and want to have Google Play ?
G3RV0 said:
Which method do I use when I don't have rooted device and want to have Google Play ?
Click to expand...
Click to collapse
If you dont have a rooted device and you want to install a custom rom, you can use the Odin Method. Consider that i don't recommend this type of thing. It is way better to have at least a custom recovery, then you can do whatever you want on your device. Best of luck
Thank you very much for the guide. I am new to flashing ROMs/rooting my phone and such (but I've done a whole lot of reading and I think I'm about up to speed, seems like fun stuff!) but I was just wondering if there is any way to do this using the Odin method BUT without having to download TWRP?? I have a mad nasty virus on here called pornclub (yet I don't actually watch any porn on my phone, if ever at all (gofigure! :| ...))
This virus started out just trying to download apps while I was connected to the internet and firing up popups for different supermarket stores etc, which was bare-able, but I done a factory reset on the thing and now it seems like the virus is back- and with a vengeance!!! It completely fills the whole phone with popups saying 'hot sexy girls now' etc and downloading so many different silly apps that I can't actually even use any function on the phone any more. So that means no phonecalls, texts, anything, it literally takes over the whole phone with these apps and pictures of all the 'sexy sluts' I can apparently go and meet right now. I also obviously cannot download TWRP or anything else for that matter.
So do I have any silver lining to my boob shaped cloud? Just need to know if there is any way I can just flash a new custom mod without having to download anything on the actual phone at this point, as I have just done a factory reset and now cannot access any functions on there because of popups etc.
Thank you very much kindly in advance for any help. Much appreciated!
edit: I should mention that it now also switches on the wifi and mobile data simultaneously without me even touching it. I currently have the phone sitting on download mode and charging.
zeneven said:
Thank you very much for the guide. I am new to flashing ROMs/rooting my phone and such (but I've done a whole lot of reading and I think I'm about up to speed, seems like fun stuff!) but I was just wondering if there is any way to do this using the Odin method BUT without having to download TWRP?? I have a mad nasty virus on here called pornclub (yet I don't actually watch any porn on my phone, if ever at all (gofigure! :| ...))
This virus started out just trying to download apps while I was connected to the internet and firing up popups for different supermarket stores etc, which was bare-able, but I done a factory reset on the thing and now it seems like the virus is back- and with a vengeance!!! It completely fills the whole phone with popups saying 'hot sexy girls now' etc and downloading so many different silly apps that I can't actually even use any function on the phone any more. So that means no phonecalls, texts, anything, it literally takes over the whole phone with these apps and pictures of all the 'sexy sluts' I can apparently go and meet right now. I also obviously cannot download TWRP or anything else for that matter.
So do I have any silver lining to my boob shaped cloud? Just need to know if there is any way I can just flash a new custom mod without having to download anything on the actual phone at this point, as I have just done a factory reset and now cannot access any functions on there because of popups etc.
Thank you very much kindly in advance for any help. Much appreciated!
edit: I should mention that it now also switches on the wifi and mobile data simultaneously without me even touching it. I currently have the phone sitting on download mode and charging.
Click to expand...
Click to collapse
Wow you seem to be in trouble but we can FIX it!
First of all i need you to have your battery charged to 100%.( if you cant charge your phone while its on, remove the battery and charge it to another phone or charge it with an external battery charger )
Power off your phone.
With the 3 button compination, go to your current(stock for you i think) recovery and do a factory reset. This will wipe all your data thus the virus.
After all this, boot into your rom.
Then you can flash a custom recovery and flash any rom you want.
You are done!
If this does not work for you, just let me know and i will post another solution.(i am not posting it right now cause it is more complicated!)
EDIT: Sorry for the delay but i didnt saw that you had already done a factory reset and it didnt work. That means that the virus is propably on the sd card. The solution is to wipe your sdcard and use the odin method. As simple as that. Please next time try to keep the things you tried and what is your problem together.
Geocfu1 said:
Wow you seem to be in trouble but we can FIX it!
First of all i need you to have your battery charged to 100%.( if you cant charge your phone while its on, remove the battery and charge it to another phone or charge it with an external battery charger )
Power off your phone.
With the 3 button compination, go to your current(stock for you i think) recovery and do a factory reset. This will wipe all your data thus the virus.
After all this, boot into your rom.
Then you can flash a custom recovery and flash any rom you want.
You are done!
If this does not work for you, just let me know and i will post another solution.(i am not posting it right now cause it is more complicated!)
EDIT: Sorry for the delay but i didnt saw that you had already done a factory reset and it didnt work. That means that the virus is propably on the sd card. The solution is to wipe your sdcard and use the odin method. As simple as that. Please next time try to keep the things you tried and what is your problem together.
Click to expand...
Click to collapse
Oops, sorry about that. Thank you for the reply.
I took the sd card out a long time ago but the problem is still there somehow. When I switch on the phone, I have about seconds before I can no longer use it because of popups etc...
Also, I just checked and it seems like I joined these forums on the exact same date as you but 1 year later, we both joined on the 18th of January.
NOTE: Do at your own risk and always make a backup before.
How to install custom recovery, root and Xposed for 5.1
Requirements:
1. Unlocked Bootloader
How to unlock Bootloader http://www.phonearena.com/news/How-to-unlock-the-bootloader-on-Motorola-phones-Moto-X-Moto-G_id53876
2. ADB drivers
http://forum.xda-developers.com/showthread.php?t=2588979
3.TWRP
https://dl.twrp.me/ghost/twrp-2.8.7.0-ghost.img.html
4.Xposed
Zip File: http://forum.xda-developers.com/attachment.php?attachmentid=3543415&d=1447616638
apk: http://forum.xda-developers.com/attachment.php?attachmentid=3392105&d=1436123813
Steps:
1. Copy the twrp file to the folder where adb drivers are installed (generally C://adb) and rename it to twrp.img. Copy both the zip and apk file of the xposed to your phone memory.
2. Enable usb debugging in your phone and connect it to your pc.
3. Open cmd in the adb folder by pressing LeftShift and right mouse button and select open Command prompt here.
4. Type adb reboot bootloader. Or shut down your device. Press vol down+power for abut 5secs and release it.
5. Type fastboot flash recovery twrp..img
6. Go to recovery on your device by pressing vol down and select it by pressing vol up.
7. Go to reboot and select system. Swipe to install SuperSu
8. After your device boots up update the SuperSu app.
9. Boot your device to twrp recovery.
10. Select install and select the xposed zip.
11. Reboot your device.
12. Install the xopsed apk.
13. Reboot.
DONE :good:
List of xposed available for 5.1: http://android.wonderhowto.com/inspiration/complete-list-lollipop-compatible-xposed-modules-0160380/
Original thread for xposed: http://forum.xda-developers.com/xposed/super-alpha-posted-permission-xposed-t3072979
Original thread of SuperSu: http://forum.xda-developers.com/showthread.php?t=1538053
FIX for Mobile Standby Battery Drain
Download this apk
Activate the module in Xposed.
Reboot.
Original Thread: http://forum.xda-developers.com/xposed/modules/xposed-mobileradioactivefix-t3132956
You have old versions of the APK and Installer, here are the latest versions that I have confirmed working...
mastarifla said:
You have old versions of the APK and Installer, here are the latest versions that I have confirmed working...
Click to expand...
Click to collapse
i will update them in the op. i haven't tried it so i didn't post it
good thing you made this
fastboot or mfastboot?? i do it using mfastboot... because since the beginning i've been seeing people using mfastboot.... i guess it has to do something with the write persmissions HERE
jcrahul said:
fastboot or mfastboot?? i do it using mfastboot... because since the beginning i've been seeing people using mfastboot.... i guess it has to do something with the write persmissions HERE
Click to expand...
Click to collapse
you can use fastboot also. mfastboot use is mainly for multiple fastboot files or large file. it is used to flash system.img because it has multiple files and its size is too large for fastboot
Thanks! Worked like a charm! And, one more question.. Can I do a Wipe Cache Partition? Will it cause my phone's to be unstable? And, after installing several mods (modules, I'm witnessing a battery issue.) So, my question is, Performing a Wipe Cache Partition will have any affect on my phone? And Will it improve my battery performance? Thanks in advance!
Vampirexox said:
Thanks! Worked like a charm! And, one more question.. Can I do a Wipe Cache Partition? Will it cause my phone's to be unstable? And, after installing several mods (modules, I'm witnessing a battery issue.) So, my question is, Performing a Wipe Cache Partition will have any affect on my phone? And Will it improve my battery performance? Thanks in advance!
Click to expand...
Click to collapse
You can wipe partition cache. it will not make your device unstable but clearing cache many times is not good.
OP updated with latest Xposed zip, apk and TWRP 2.8.7.0
How to uninstall it?
My phone is bootloader unlocked & rooted + TWRP but still using the original Nougat firmware from ZTE. Now, for some unexplained reason I cannot install any custom ROM that does NOT have Gapps incuded, like Resurrection Remix or similar slim ROMs without Gapps. TWRP just gives the usual can't install error.
Moreover, even if I install a ROm with Gapps successfully I cannot go past the 'Google verifying account' (have to wait for 24 hours) nonsense.
Any advise appreciated.
xectis said:
My phone is bootloader unlocked & rooted + TWRP but still using the original Nougat firmware from ZTE. Now, for some unexplained reason I cannot install any custom ROM that does NOT have Gapps incuded, like Resurrection Remix or similar slim ROMs without Gapps. TWRP just gives the usual can't install error.
Moreover, even if I install a ROm with Gapps successfully I cannot go past the 'Google verifying account' (have to wait for 24 hours) nonsense.
Any advise appreciated.
Click to expand...
Click to collapse
What's your TWRP version?
I guess you are installing the Universal Bootloader, right? Do you install a newer TWRP img after that?
Which are the ROMs that fail?
What's the failure error?
Have you ever formatted data? What's its filesystem?
Choose an username... said:
What's your TWRP version?
I guess you are installing the Universal Bootloader, right? Do you install a newer TWRP img after that?
Which are the ROMs that fail?
What's the failure error?
Have you ever formatted data? What's its filesystem?
Click to expand...
Click to collapse
Thanks for the response. I used Axon7 Toolkit for all actions, including boot unlocking (no idea which version Axon Toolkit installed). It also installed TWRP 3.1.1.0 alisa which I've had all the time.
The ROMs that failed were 'XenonHD-170609-Unofficial.zip' and 'Resurrection Remix' (RR-N-v5.8.5-20171108-axon7-Official.zip). Also I installed successfully 'A2017G(N-B06)_AROMA_SL!M2+DF!NR_by_raystef66.zip' which has Gapps included....but the problem was that I could not get past the google account verification, even though I know my google details. It says I had to wait 24 hours before signing in.
The failure error from XenonHD and Resurrection Remix ROMs was: Updater process ended with error: 7
Yes I formatted data each time I installed a ROM.
I don't know how to find out what the file system is.
xectis said:
Thanks for the response. I used Axon7 Toolkit for all actions, including boot unlocking (no idea which version Axon Toolkit installed). It also installed TWRP 3.1.1.0 alisa which I've had all the time.
The ROMs that failed were 'XenonHD-170609-Unofficial.zip' and 'Resurrection Remix' (RR-N-v5.8.5-20171108-axon7-Official.zip). Also I installed successfully 'A2017G(N-B06)_AROMA_SL!M2+DF!NR_by_raystef66.zip' which has Gapps included....but the problem was that I could not get past the google account verification, even though I know my google details. It says I had to wait 24 hours before signing in.
The failure error from XenonHD and Resurrection Remix ROMs was: Updater process ended with error: 7
Yes I formatted data each time I installed a ROM.
I don't know how to find out what the file system is.
Click to expand...
Click to collapse
I believe you forgot to flash the Universal Bootloader. That's an error on your end.
Basically, what the Universal Bootloader does is change your device's info to something 'universal' (it somewhat standardizes A2017s, A2017Us and A2017Gs into an intermediate so that you can flash any custom ROM on any of the 3). It also installs TWRP 3.0.2-N or sth like that. So basically you need to have TWRP-3.1.1-0.img on your phone, then flash the Universal Bootloader, then the modem for your device (get the latest from Raystef66's download center), then the ROM and whatever ZIPs you want to install (ALWAYS install SuperSU or Magisk or you'll get the internal storage encrypted and you'll have to format the internal storage every time you want to change ROM), and lastly Install Image - the TWRP.img - install to recovery partition.
You can get the Universal Bootloader from the LOS thread. There are also modem files for the 3 models but they are rather old, so just get the B09 modem from the download center
Choose an username... said:
I believe you forgot to flash the Universal Bootloader. That's an error on your end.
Basically, what the Universal Bootloader does is change your device's info to something 'universal' (it somewhat standardizes A2017s, A2017Us and A2017Gs into an intermediate so that you can flash any custom ROM on any of the 3). It also installs TWRP 3.0.2-N or sth like that. So basically you need to have TWRP-3.1.1-0.img on your phone, then flash the Universal Bootloader, then the modem for your device (get the latest from Raystef66's download center), then the ROM and whatever ZIPs you want to install (ALWAYS install SuperSU or Magisk or you'll get the internal storage encrypted and you'll have to format the internal storage every time you want to change ROM), and lastly Install Image - the TWRP.img - install to recovery partition.
You can get the Universal Bootloader from the LOS thread. There are also modem files for the 3 models but they are rather old, so just get the B09 modem from the download center
Click to expand...
Click to collapse
Thanks for your help and your suggestions. Will try a few things as I go along. Thanks again.
xectis said:
Thanks for your help and your suggestions. Will try a few things as I go along. Thanks again.
Click to expand...
Click to collapse
Just two things, you mentioned "and lastly Install Image - the TWRP.img - install to recovery partition". I already have TWRP 3.1.1.0 installed so did you mean to install it again after flashing the Universal Bootloader and modem?
Also, is this the correct link for the LOS thread you mentioned: https://forum.xda-developers.com/axon-7/how-to/download-center-factory-images-ota-t3606547
xectis said:
Just two things, you mentioned "and lastly Install Image - the TWRP.img - install to recovery partition". I already have TWRP 3.1.1.0 installed so did you mean to install it again after flashing the Universal Bootloader and modem?
Also, is this the correct link for the LOS thread you mentioned: https://forum.xda-developers.com/axon-7/how-to/download-center-factory-images-ota-t3606547
Click to expand...
Click to collapse
Yes and no
The Universal bootloader flashes an old TWRP version. After you reboot and enter the recovery again you will get an old TWRP. So to avoid this you have to flash the Universal Bootloader and then TWRP 3.1.1 or 3.2.1
That's the download center... I mean the LineageOS thread over at the ROMs section. By Unjustified Dev
Choose an username... said:
Yes and no
The Universal bootloader flashes an old TWRP version. After you reboot and enter the recovery again you will get an old TWRP. So to avoid this you have to flash the Universal Bootloader and then TWRP 3.1.1 or 3.2.1
That's the download center... I mean the LineageOS thread over at the ROMs section. By Unjustified Dev
Click to expand...
Click to collapse
I see. All clear now. You've been most helpful, thank you again.
[/QUOTE]
xectis said:
I see. All clear now. You've been most helpful, thank you again.
Click to expand...
Click to collapse
Hi again, almost everything worked as per your suggestions except installing ROMs without Gapps as mentioned previously such as Resurrection Remix. I get the dreaded 'To Start Android, Enter Password' notice (pic attached). Even after putting a random password it comes up with 'The password you entered is correct, but unfortunately your data is corrupt'. I did a factory reset but no joy. So it looks like I have to install Gapps also?. By the way my device is not encrypted.
On a different note, do you know of a link that has a mod for increasing the volume in the ear speaker so I can hear callers with a louder volume.
Hi again, almost everything worked as per your suggestions except installing ROMs without Gapps as mentioned previously such as Resurrection Remix. I get the dreaded 'To Start Android, Enter Password' notice (pic attached). Even after putting a random password it comes up with 'The password you entered is correct, but unfortunately your data is corrupt'. I did a factory reset but no joy. So it looks like I have to install Gapps also?. By the way my device is not encrypted.
On a different note, do you know of a link that has a mod for increasing the volume in the ear speaker so I can hear callers with a louder volume.[/QUOTE]
You have to format the internal storage, because it is encrypted. Do this:
You need to have Magisk 15.1 or 14 or SuperSU 2.79 ready. I recommend the latest Magisk. If you have an SD card, put it there. If not, leave it on your PC and have the phone connected.
Go to TWRP, Wipe, Advanced Wipe, Format data. Be sure that it formats as ext4 (it will say 'formating using make-ext4fs or something, if it says f2fs then leave it format and then use Change filesystem to ext4).
Right after that, install Magisk. If you have the SD card it's easy, if you don't, try to connect the phone to the PC, if it appears as a mass storage option then put it there and flash it with Install. If it doesn't appear as mass storage use adb sideload
NEVER leave the phone without SuperSU or Magisk! If you change the ROM, ALWAYS install Magisk or SuperSU right after you install the ROM. Otherwise you'll have to format the internal storage again the next time you change the ROM.
Choose an username... said:
Hi again, almost everything worked as per your suggestions except installing ROMs without Gapps as mentioned previously such as Resurrection Remix. I get the dreaded 'To Start Android, Enter Password' notice (pic attached). Even after putting a random password it comes up with 'The password you entered is correct, but unfortunately your data is corrupt'. I did a factory reset but no joy. So it looks like I have to install Gapps also?. By the way my device is not encrypted.
On a different note, do you know of a link that has a mod for increasing the volume in the ear speaker so I can hear callers with a louder volume.
Click to expand...
Click to collapse
You have to format the internal storage, because it is encrypted. Do this:
You need to have Magisk 15.1 or 14 or SuperSU 2.79 ready. I recommend the latest Magisk. If you have an SD card, put it there. If not, leave it on your PC and have the phone connected.
Go to TWRP, Wipe, Advanced Wipe, Format data. Be sure that it formats as ext4 (it will say 'formating using make-ext4fs or something, if it says f2fs then leave it format and then use Change filesystem to ext4).
Right after that, install Magisk. If you have the SD card it's easy, if you don't, try to connect the phone to the PC, if it appears as a mass storage option then put it there and flash it with Install. If it doesn't appear as mass storage use adb sideload
NEVER leave the phone without SuperSU or Magisk! If you change the ROM, ALWAYS install Magisk or SuperSU right after you install the ROM. Otherwise you'll have to format the internal storage again the next time you change the ROM.[/QUOTE]
I did everything you suggested but I still get the 'To start Android use your password'. No wories I'll go back to my old ROM. Thanks anyway.
***Update*** I made a mistake in formatting SYSTEM instead of DATA. Now it works fine installing the ROM's I mentioned. You are a champ!
Now all I need is to somehow find a way to raise the in-call volume (ear speaker).
xectis said:
Now all I need is to somehow find a way to raise the in-call volume (ear speaker).
Click to expand...
Click to collapse
Try this
https://forum.xda-developers.com/axon-7/how-to/patch-enable-ak4490-hifi-dac-custom-rom-t3707738
It'll probably not work but you'll end up with the AK4490 anyways
Choose an username... said:
Try this
https://forum.xda-developers.com/axon-7/how-to/patch-enable-ak4490-hifi-dac-custom-rom-t3707738
It'll probably not work but you'll end up with the AK4490 anyways
Click to expand...
Click to collapse
Thanks for the link, however I recently discovered that with the 'XenonHD-170609-Unofficial' ROM the in-call volume is pretty loud as well as the sound from the normal sounding speakers. It also has just about everything I'd want in a lite ROM. So far it's the ROM I'll keep.
xectis said:
Thanks for the link, however I recently discovered that with the 'XenonHD-170609-Unofficial' ROM the in-call volume is pretty loud as well as the sound from the normal sounding speakers. It also has just about everything I'd want in a lite ROM. So far it's the ROM I'll keep.
Click to expand...
Click to collapse
Use the zip anyways
Choose an username... said:
Use the zip anyways
Click to expand...
Click to collapse
Ok I'll give it a try.
Hey I want to try pixel experience rom in my nexus 6p but the installation guide there is too complex can someone from the forums break it down and explain so I can install it and also my device is a 8core model so I am not sure weather or not I need a BLOD patch and why I need a custom recovery (other then the normal custom recovery) Thanks in advance
1.No need to flashing blod
2.remove any passwords or screen lock before flashing
3.boot into fastboot make sure bootloader is unlocked
4.flash the twrp recovery provided in the forum u can't use the usual one
5.after installing recovery wipe everything from the advance wipe except internal storage
6.locate and install the rom don't flash the gapps its already included
7.before booting in the system make sure to wipe ur data from wipe or ur phone will not boot
8.time to enjoy!!!
varunvrk said:
Hey I want to try pixel experience rom in my nexus 6p but the installation guide there is too complex can someone from the forums break it down and explain so I can install it and also my device is a 8core model so I am not sure weather or not I need a BLOD patch and why I need a custom recovery (other then the normal custom recovery) Thanks in advance
Click to expand...
Click to collapse
It is quite simple. You'll just need to do a bit if reading about adb and fastboot and make sure you follow these steps methodically. You do not need BLOD patch. You need the custom recovery version from the pixelexperience thread because of the way files are encrypted.
1 . Go to settings - system - about phone. Tap on build number 7 times until you see a pop up saying developer options enabled.
2. Go to settings - system - advanced - developer options. In there you want to enable oem unlocking and usb debugging.
3. Go to settings - security. Remove all device security so it's just swipe to unlock.
4. Follow this guide to setup google drivers, adb, fastboot and unlock the bootlader https://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928
5. Download latest rom version and twrp recovery version from pixelexperience thread to your pc and follow instruction in above guide for flashing twrp via fastboot.
6. Boot into your custom recovery (hold power + volume down while phone is off, use volume keys to select recovery, power for enter) ignore warning screen.
7. Go to backup. Select system, data and boot. Name it something like stock_todaysdate. Swipe to create backup. Reboot system.
8. Connect phone to pc. Through pc find twrp folder in phone, find your backup, copy to pc for safe keeping (this can restore your phone to how it was if anything goes wrong). Copy the rom zip you downloaded to your phone's internal storage.
9. Boot back into recovery. Go to wipe. Wipe everything except internal storage. Go to install. Locate the rom zip file and install it. Go to wipe again. Select format data and confirm.
10. Reboot system and wait for rom to boot this can take a while. Once booted leave your phone alone for a few minutes then you are good to go. If all is well make another backup and store on pc.
Champdroid said:
It is quite simple. You'll just need to do a bit if reading about adb and fastboot and make sure you follow these steps methodically. You do not need BLOD patch. You need the custom recovery version from the pixelexperience thread because of the way files are encrypted.
1 . Go to settings - system - about phone. Tap on build number 7 times until you see a pop up saying developer options enabled.
2. Go to settings - system - advanced - developer options. In there you want to enable oem unlocking and usb debugging.
3. Go to settings - security. Remove all device security so it's just swipe to unlock.
4. Follow this guide to setup google drivers, adb, fastboot and unlock the bootlader https://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928
5. Download latest rom version and twrp recovery version from pixelexperience thread to your pc and follow instruction in above guide for flashing twrp via fastboot.
6. Boot into your custom recovery (hold power + volume down while phone is off, use volume keys to select recovery, power for enter) ignore warning screen.
7. Go to backup. Select system, data and boot. Name it something like stock_todaysdate. Swipe to create backup. Reboot system.
8. Connect phone to pc. Through pc find twrp folder in phone, find your backup, copy to pc for safe keeping (this can restore your phone to how it was if anything goes wrong). Copy the rom zip you downloaded to your phone's internal storage.
9. Boot back into recovery. Go to wipe. Wipe everything except internal storage. Go to install. Locate the rom zip file and install it. Go to wipe again. Select format data and confirm.
10. Reboot system and wait for rom to boot this can take a while. Once booted leave your phone alone for a few minutes then you are good to go. If all is well make another backup and store on pc.
Click to expand...
Click to collapse
That is the best instructions I have seen in a while. I kinda figured that that was how to do it but I am not confident in my abilities. This confirms what I thought needed to be done.
I am not new to flashing I have been doing it since the LG g2x. But I did take a 3 year break from flashing and now everything is a little different.
Anyway thank you for this
mojorisin7178 said:
That is the best instructions I have seen in a while. I kinda figured that that was how to do it but I am not confident in my abilities. This confirms what I thought needed to be done.
I am not new to flashing I have been doing it since the LG g2x. But I did take a 3 year break from flashing and now everything is a little different.
Anyway thank you for this
Click to expand...
Click to collapse
Pleasure mate glad you appreciate it.
I also took a long break. Started back in the HTC sensation days! It's amazing how much everything changes when you don't check in for a while. Magisk for example blows my mind.
Champdroid said:
Pleasure mate glad you appreciate it.
I also took a long break. Started back in the HTC sensation days! It's amazing how much everything changes when you don't check in for a while. Magisk for example blows my mind.
Click to expand...
Click to collapse
Yeah magisk is crazy the devs here at xda can do anything. They really are the best of the best. Everything I know I learned here on xda. I just read they are working on a new way to root at the kernel level so it's built in right from the when it's compiled. That's just crazy smart.