I was installing a rom for fastboot and my phone now only comes into fastboot mode, I have no recovery, and I can not flash anything fastboot because my bootloader is locked, and can not unlock I downloaded all rom for the model 1607 I Try RSDLite by fastboot flash by and I was not going to install the GPT or the BOOT among others DISTRESS
Moto G XT1607 Prime
You answer is here.
http://forum.xda-developers.com/moto-g4/development/moto-g-4th-gen-how-to-remove-amazon-t3416587
Found a Solution?
Hello Manuelfbriceno, You did could find a solution to you phone?
Manuelfbriceno said:
I was installing a rom for fastboot and my phone now only comes into fastboot mode, I have no recovery, and I can not flash anything fastboot because my bootloader is locked, and can not unlock I downloaded all rom for the model 1607 I Try RSDLite by fastboot flash by and I was not going to install the GPT or the BOOT among others DISTRESS
Click to expand...
Click to collapse
Related
So after booting into fastboot and using the general bootloader unlock method using the commands "fastboot oem unlock" my phone is just looping and looping. I've tried to find factory firmware images from Motorola but there is literally nothing for the E3 2016 (yet). This is a bloody nightmare as I bought the phone today and now it's unusable. I've tried flashing the TWRP version for this phone, but that also doesn't boot!
What do I do? Please help...
Use command fastboot format userdata ...
Already tried that, just wiped the whole partition clean. Unrecoverable. Just got a replacement handset. This phone is not developed upon enough yet.
help having same problem
thx solved myself with spflashtool
Follow the steps below exactly in this order:
fastboot oem unlock
fastboot flashing unlock
fastboot flash recovery twrp.img
fastboot format userdata
* it is possible that you will have to change the file name to twrp.img
If that does not help - you have to upload stock firmware [ eg. Lenovo_XT1706_MT6735M_S135_161108 ] using SP Flash Tool.
plcrazyprogrammer said:
Follow the steps below exactly in this order:
fastboot oem unlock
fastboot flashing unlock
fastboot flash recovery twrp.img
fastboot format userdata
* it is possible that you will have to change the file name to twrp.img
If that does not help - you have to upload stock firmware [ eg. Lenovo_XT1706_MT6735M_S135_161108 ] using SP Flash Tool.
Click to expand...
Click to collapse
i am unable to format the userdata it is giving some error. i am still stuck in bootloop. please can u tell me which is the latest stock rom which i can flash without having hardbrick. as i have seen that flashing a wrong rom can hardbrick your device.
anurag75 said:
i am unable to format the userdata it is giving some error. i am still stuck in bootloop. please can u tell me which is the latest stock rom which i can flash without having hardbrick. as i have seen that flashing a wrong rom can hardbrick your device.
Click to expand...
Click to collapse
Please don`t use the newest firmware! It`s not logical, but true
Use stock lastest firmware with unlocked bootloader:
XT1700 → S124
XT1706 → S135
...and now try fastboot oem unlock, flashing unlock, flash twrp & format userdata.
Regards.
plcrazyprogrammer said:
Please don`t use the newest firmware! It`s not logical, but true
Use stock lastest firmware with unlocked bootloader:
XT1700 → S124
XT1706 → S135
...and now try fastboot oem unlock, flashing unlock, flash twrp & format userdata.
Regards.
Click to expand...
Click to collapse
hey ,
i want to go back to stock on moto e3 power xt1706. i think i was on s146 (dec. 2017 security patch).
is it safe to flash s135. i don't want my phone dead.
Hi all,
I have a Moto G5 Plus that I brought on Amazon Prime day (11/07/17). and after trying to install TWRP I have ran into problems.
Heres what happened and where I'm left.
1) I unlocked the Bootlloader via moto website. No problems I now receive the BS message about the phone being unlocked.
2) Tried flashing twrp_3.1.1-0_potter.zip using "fastboot flash recovery twrp_3.1.1-0_potter.img"
Whenever I performed this command and rebooted in recovery I was never taken into the TWRP screen, but taken a screen showing a droid on it back with a message saying no command. I found how to bring up the command menu, but trying to flash the custom roms from the stock recovery always failed.
3) I used this article https://forum.xda-developers.com/g5-...-plus-t3605667 and found using this did allow me to boot into the TWRP screen. The only difference i noticed was that when i used the article mentioned above to get into TWRP the phone displayed the Moto boot ami before going into TWRP. It never did this when i used the Flash command manually.
4) Once in TWRP i flashed supersu and the RR .img, wiped cache etc..
On exiting TWRP I was asked whether I wanted TWRP installed as a system app, i selected yes to this question and now.....
5) BRICKED!!!
My moto will only boot into fastboot now and I get this message:-
Start up failed:
the bs about software repair assistant etc.
ap fastboot Flash Mode (secure)
Error: failed to load kernel!
Fastboot Reason: Fall-through from charge boot mode
usb....
6) I tried using this article https://forum.xda-developers.com/g5-plus/how-to/npn25-137-33-stock-firmware-t3577081
But I'm unsure of this version to use?
My question is can anyone help me to at least get my phone working again. Thanks will be paid.
JammieB said:
I have a Moto G5 Plus that I brought on Amazon Prime day (11/07/17). and after trying to install TWRP I have ran into problems.
Click to expand...
Click to collapse
Which Amazon Moto G5 Plus did you buy on Prime Day? The cheaper subsidized Amazon Prime version with ads or the more expensive non subsidized version without ads?
Apparently you cannot unlock the bootloader on the subsidized ad based Amazon Prime version. This is well discussed. One such discussion from the Lenovo/Moto support forum:
https://forums.lenovo.com/t5/Moto-G5-Moto-G5-Plus/Is-there-anyway-to-unlock-my-Moto-G5-Plus-from-Amazon/td-p/3638019
If one does a forum search on this site they'll find past discussions indicating the bootloader on Amazon Prime subsided Moto G5 Plus phones cannot be unlocked.
Try the Toolkit.
Once in it flash the TWRP and boot_image and try rebooting. If that doesn't work flash the Stock ROM and then flash the TWRP and boot_image. Once you get those flashed you should be able to flash the latest TWRP using fastboot.
Please let me know if that fixed it.
Thanks,
CP
cyber_prometheus said:
Try the Toolkit.
Once in it flash the TWRP and boot_image and try rebooting. If that doesn't work flash the Stock ROM and then flash the TWRP and boot_image. Once you get those flashed you should be able to flash the latest TWRP using fastboot.
Please let me know if that fixed it.
Thanks,
CP
Click to expand...
Click to collapse
Thanks for the suggestion, however I have tried this toolkit already and when connecting the USB cable, the toolkit only ever says connecting to device, but never manages to actually connect. As such, no command from the toolkit can be run, as when tried I get a "no device" message.
Also when I try to use the toolkit to install Windows 64bit driver, the install stops telling me I have a newer driver installed already.
Do you think I should uninstalled the newer device driver or should the toolkit still connect using the newer driver?
bennor3814 said:
Which Amazon Moto G5 Plus did you buy on Prime Day? The cheaper subsidized Amazon Prime version with ads or the more expensive non subsidized version without ads?
Apparently you cannot unlock the bootloader on the subsidized ad based Amazon Prime version. This is well discussed. One such discussion from the Lenovo/Moto support forum:
https://forums.lenovo.com/t5/Moto-G5-Moto-G5-Plus/Is-there-anyway-to-unlock-my-Moto-G5-Plus-from-Amazon/td-p/3638019
If one does a forum search on this site they'll find past discussions indicating the bootloader on Amazon Prime subsided Moto G5 Plus phones cannot be unlocked.
Click to expand...
Click to collapse
Im 100% confident that my moto has had its bootloader unlocked and that I was not sold a Moto G5 Plus with amazon ads.....
Thanks for your suggestion though.
FIXED back to stock rom. Here's what I did:-
1) Downloaded the stock rom from https://forum.xda-developers.com/g5/how-to/npp25-137-33-stock-firmware-moto-g5-t3577084
Used the mega link it took 5mins (1.4 mbps) to download.
2) Then run these commands:- (thanks to https://forum.xda-developers.com/member.php?u=5033408)
fastboot oem lock begin
fastboot oem lock begin
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize (gave error about bootloader)
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot oem lock
fastboot reboot
It still see the annoying unlocked bootloader screen, but my moto boots into the stock rom.
I'm not giving up on getting a custom rom onto this device, but thanks to anyone who's helped me to get back to square one.
JammieB said:
Thanks for the suggestion, however I have tried this toolkit already and when connecting the USB cable, the toolkit only ever says connecting to device, but never manages to actually connect. As such, no command from the toolkit can be run, as when tried I get a "no device" message.
Also when I try to use the toolkit to install Windows 64bit driver, the install stops telling me I have a newer driver installed already.
Do you think I should uninstalled the newer device driver or should the toolkit still connect using the newer driver?
Click to expand...
Click to collapse
I didn't install the drivers with the toolkit. Was your phone connected to it in fastboot mode? That's what I had to do to get it to detect mine.
If you can't get the toolkit to work you can still use fastboot to flash the included version of TWRP and the modified boot_image. They're located in TOOLKIT_DIR\resources\app.asar.unpacked\files.
CP
My moto g4 plus, model XT1643 was hardbricked, i installed blank flash on it, it has rebooted into bootloader mode of blankflash with no android logo, and has locked oem of my phone. I cannot install a stock rom now as the oem is locked and when unlocking oem from cmd prompt its asking me to enable oem from from developer options, which i cannot do as my mobile is not booting. Please help as to how can i install stock rom into it as my bootloader and oem is locked now. Any help would be appreciated, thanks.
tried to pass the last stock if I am not mistaken version that is or updated passes without being with bootloader unlocked.
Pranav_dp said:
My moto g4 plus, model XT1643 was hardbricked, i installed blank flash on it, it has rebooted into bootloader mode of blankflash with no android logo, and has locked oem of my phone. I cannot install a stock rom now as the oem is locked and when unlocking oem from cmd prompt its asking me to enable oem from from developer options, which i cannot do as my mobile is not booting. Please help as to how can i install stock rom into it as my bootloader and oem is locked now. Any help would be appreciated, thanks.
Click to expand...
Click to collapse
Following a blankflash, you can only boot into the bootloader, which is normal. It seems that using a blankflash sets your bootloader to be locked, regardless of if it was previously unlocked in the first place. Provided you can flash a stock ROM, your bootloader should become unlocked again.
Have you tried flashing the April 2018 fastboot stock ROM from https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138 ? The guide there should be useful in how to reflash stock firmware to your device, and as it's the newest firmware that has been leaked, should rescue your device.
If you want to keep your bootloader unlocked and try to save your data, then try the following flashing commands instead of the ones in the guide. Be aware that you may have to factory reset your device should it boot but be unstable.
Code:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot reboot
These commands should flash the April 2018 GPT, bootloader, system and modem to your device. Please try to avoid hardbricks in the future by only flashing stock firmware as new or newer than your bootloader, and please do not use old OTA updates.
echo92 said:
Following a blankflash, you can only boot into the bootloader, which is normal. It seems that using a blankflash sets your bootloader to be locked, regardless of if it was previously unlocked in the first place. Provided you can flash a stock ROM, your bootloader should become unlocked again.
Have you tried flashing the April 2018 fastboot stock ROM from https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138 ? The guide there should be useful in how to reflash stock firmware to your device, and as it's the newest firmware that has been leaked, should rescue your device.
If you want to keep your bootloader unlocked and try to save your data, then try the following flashing commands instead of the ones in the guide. Be aware that you may have to factory reset your device should it boot but be unstable.
These commands should flash the April 2018 GPT, bootloader, system and modem to your device. Please try to avoid hardbricks in the future by only flashing stock firmware as new or newer than your bootloader, and please do not use old OTA updates.
Click to expand...
Click to collapse
Thank you so much, I've restored the stock rom following your guidelines, my phone is working fine but im not able to install any OTA updates after that. Should i just skip any OTA updates from now on, please advice. Thank you.
Pranav_dp said:
Thank you so much, I've restored the stock rom following your guidelines, my phone is working fine but im not able to install any OTA updates after that. Should i just skip any OTA updates from now on, please advice. Thank you.
Click to expand...
Click to collapse
If you flashed the April 2018 security patch stock firmware, there are currently no OTA updates, the April 2018 security patch is the latest available.
If you fully flashed the latest firmware as I mentioned, you should be okay to use OTA updates. Just in future please remember to not use OTA updates if you downgraded your device by flashing old stock firmware.
i have here one xt1640 dead for ota OPJ28.111-22 upgrade.. is possible put in Fastboot for Blank Flash Repair?
Daroas said:
i have here one xt1640 dead for ota OPJ28.111-22 upgrade.. is possible put in Fastboot for Blank Flash Repair?
Click to expand...
Click to collapse
Without a blankflash new enough to flash to the device, I don't think so. You'd have to consider a JTAG repair, a motherboard replacement or buy a new device.
I'm currently stuck in a bootloop with a rooted (Prime Exclusive) Moto G5 Plus. Every time I turn on the phone or restart the phone, I keep getting sent to TWRP Recovery, and can't boot into the system. What I want to do is just restore this phone to the stock firmware and factory reset my device. Please help me.
FamilyGuy0395 said:
I'm currently stuck in a bootloop with a rooted (Prime Exclusive) Moto G5 Plus. Every time I turn on the phone or restart the phone, I keep getting sent to TWRP Recovery, and can't boot into the system. What I want to do is just restore this phone to the stock firmware and factory reset my device. Please help me.
Click to expand...
Click to collapse
Download your actual firmware, unpack it into your fastboot folder (recommend: Minimal ADB & Fastboot), bring your device in fastboot mode and flash everything one after the other:
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
Sent from my Moto G5 Plus using XDA Labs
@Wolfcity Can you be more clear as to what you mean by my "actual firmware"? I'm not sure what firmware version my device is on, nor can I find any repository on the Internet to download said firmwares for the (Prime Exclusive) Moto G5 Plus.
FamilyGuy0395 said:
@Wolfcity Can you be more clear as to what you mean by my "actual firmware"? I'm not sure what firmware version my device is on, nor can I find any repository on the Internet to download said firmwares for the (Prime Exclusive) Moto G5 Plus.
Click to expand...
Click to collapse
As you have flashed a TWRP you must have your bootloader unlocked. You need the firmware that your device was on when you did that.
Downgrading i.e. flashing an older firmware can brick your device.
The newer firmwares for reteu/retus are ending on 93-x, like
POTTER_NPNS25.137-93-4 (january security patch)
POTTER_NPNS25.137-93-8 (march security patch)
POTTER_NPNS25.137-93-10 (april security patch)
Earlier ones had another number scheme.
Firmware for India, Brazil and Asia Pacific is ending on 92-x.
I don´t know the Prime exclusive edition but I don´t think that it uses another firmware. But I heard of a Amazon version with ads and an unlockable bootloader?
How did you unlock then? Or are there different versions?
@Wolfcity I really don't know how to respond, but I can't figure this out. I don't know what firmware version to install, I don't know where I can find the firmware version, and whenever I try to run a fastboot command through adb I get stuck on an infinite "waiting for device" message. Can you please help me with step-by-step instructions on how to fix this?
FamilyGuy0395 said:
@Wolfcity I really don't know how to respond, but I can't figure this out. I don't know what firmware version to install, I don't know where I can find the firmware version, and whenever I try to run a fastboot command through adb I get stuck on an infinite "waiting for device" message. Can you please help me with step-by-step instructions on how to fix this?
Click to expand...
Click to collapse
Here are some firmware sources:
https://androidfilehost.com/?a=show&w=files&flid=171014
https://mirrors.lolinet.com/firmware/moto/potter/official/RETAIL/
http://www.filefactory.com/folder/c6cdedc45a775d27/?sort=created&order=DESC&show=25&page=1
I can´t tell you on which firmware you were when you unlocked your bootloader. And the next problem is that you can´t run any fastboot commands, you need fastboot to flash the stock firmware with the commands I posted above.
Have you the latest Motorola drivers and something like Minmal ADB & Fastboot installed?
1) from TWRP run "Bootloader reboot"
2) send the command "fastboot devices" receive the serial number of the phone. Once you have obtained the serial download "POTTER_NPNS25.137-93-4_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.info.txt" and execute the commands as suggested.
@Wolfcity, @antonio52 Thank you guys SO much! I finally got around to doing this, and my device is running perfectly well now! I couldn't have done it without you!
FamilyGuy0395 said:
@Wolfcity, @antonio52 Thank you guys SO much! I finally got around to doing this, and my device is running perfectly well now! I couldn't have done it without you!
Click to expand...
Click to collapse
You're welcome. Nice to hear you got it working again.
Sent from my Moto G5 Plus using XDA Labs
Hi I flashed the ATHENE_RETAIL_8.1.0_OPJ28.111-22_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml in my Moto G4 Amazon variant phone.
Now the phone is stocked at logo.
Has anyone root this model with bootloader locked ?
meolivares06 said:
Hi I flashed the ATHENE_RETAIL_8.1.0_OPJ28.111-22_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml in my Moto G4 Amazon variant phone.
Now the phone is stocked at logo.
Has anyone root this model with bootloader locked ?
Click to expand...
Click to collapse
You cannot root with a locked bootloader.
i have the same issue, wondering if any solution out yet ?
henser said:
i have the same issue, wondering if any solution out yet ?
Click to expand...
Click to collapse
Could try LMSA Flash Rescue option
https://forum.xda-developers.com/general/general/update-moto-lenovo-moto-smart-assistant-t3951714
Sent from my ali using XDA Labs
sd_shadow said:
Could try LMSA Flash Rescue option
https://forum.xda-developers.com/general/general/update-moto-lenovo-moto-smart-assistant-t3951714
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
i've just tried, tried rescue but i got an error when trying to install flashboot flash error. Says Flash failed, try again. stuck at 68 Percent
Currently looking in to flashing this.
Did you all try to flash the rom as a single file in twrp or similar or did you try to flash individual files to individual partitions?
With fastboot like:
DO NOT USE FOR THIS PHONE, SHOWN AS EXAMPLE!
sudo fastboot flash bluetooth BTFM.bin
sudo fastboot flash dsp dspso.bin
sudo fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash system system.img_sparsechunk.0
I used this kind of code for flashing new software to my G7
(Sudo is for using these commands in linux)
Restore
Just follow those steps, doesn't matter if you have the bootloader locked.
Important:
Next time, unlock the bootloader and install a custom recovery, twrp is the most common. After that flash the 8.1, it will reboot several times like if it has a problem but thats just the android config. Don't panic if you see it reach the homescreen and reboot, 3 or 4 times. It will do that untill you see the finishing progress bar prompt when it boots to homescreen
will give a try with this to see if it works.
edit tried, with 7.0 and the second command says preflash validation failed, with 8.1.0 the phone says okay all the commands but when i reboot the phone gets stuck on the blue m logo