Supermanrom with Viper4android not working - Samsung Galaxy S7 Edge Questions and Answers

Hello.
So last night I installed the latest Supermanrom on my S7 edge.
But I cant get Viper4android to work.
If i look in Magiskt then it´s installed.
But there is now app?
I downloaded the Viper4android app but when i look at "driver status" nothing is processing using Spotify.
What am I doing wrong?

dpc84 said:
Hello.
So last night I installed the latest Supermanrom on my S7 edge.
But I cant get Viper4android to work.
If i look in Magiskt then it´s installed.
But there is now app?
I downloaded the Viper4android app but when i look at "driver status" nothing is processing using Spotify.
What am I doing wrong?
Click to expand...
Click to collapse
Try doing another clean install.. wipe everything. And as for spotify, i dont think it works on it. I dont personally use spotify so I may be mistaken.

All you need do:
1.Disable/Freeze/Remove SoundAlive and Adaptsound apk... (I use lucky patcher)
2.Update ViPER4android in magisk (and download apk from magisk link. or here)
3.Remove SoundAlive and Adaptsound effect. in /system/etc/audio_effects.conf (remove all thing that have soundalive or adapt sound or download this and replace it, my audio effects conf.(also have dolby atmos R6.5 conf in that file. I think will work without dolby too..... pm me if you can't use without dolby))
4.Reboot.... also make viper apk system app may help......
It work to me with same rom. (sorry if my English is bad)

Related

Help needed with Viper Audio D802

Hi all!
First off, sorry for my bad English (its not my main language)
Just rooted the Phone with easyroot and installed TWRP 2.6.x.x
Just installed the Viperaudio file (through play store and the download link in XDA) And i cant get the volume boost or equalizer to work...
Viperaudio didnt asked me for root acces but when i check it with the Root checker app i have Root acces + i have superuser installed on my device!
Also installed the right driver for the LG (8 with NEON) and nothing works... equaliser doesnt work and the volume boost doesnt work either
Did i do something wrong?
P.S. I have the international version of the LG G2
Tutorial
harveydwijs2 said:
Hi all!
First off, sorry for my bad English (its not my main language)
Just rooted the Phone with easyroot and installed TWRP 2.6.x.x
Just installed the Viperaudio file (through play store and the download link in XDA) And i cant get the volume boost or equalizer to work...
Viperaudio didnt asked me for root acces but when i check it with the Root checker app i have Root acces + i have superuser installed on my device!
Also installed the right driver for the LG (8 with NEON) and nothing works... equaliser doesnt work and the volume boost doesnt work either
Did i do something wrong?
P.S. I have the international version of the LG G2
Click to expand...
Click to collapse
Install Busybox if you haven't already, Open it, wait for it to locate all files or whatever, Install using Smart Install, uninstall driver in Viper4Android FX by pressing menu then Uninstall, reboot, uninstall app, Then start from scratch using this tutorial (same issues and this is what I did):
http://forum.xda-developers.com/show...ight=bluetooth
And link to Good settings for this FX if you don't want to use impulses/do (NO DISTORTION CLEAN LOUD SOUND):
http://forum.xda-developers.com/show...php?p=42584030
TehJorge said:
Install Busybox if you haven't already, Open it, wait for it to locate all files or whatever, Install using Smart Install, uninstall driver in Viper4Android FX by pressing menu then Uninstall, reboot, uninstall app, Then start from scratch using this tutorial (same issues and this is what I did):
http://forum.xda-developers.com/show...ight=bluetooth
And link to Good settings for this FX if you don't want to use impulses/do (NO DISTORTION CLEAN LOUD SOUND):
http://forum.xda-developers.com/show...php?p=42584030
Click to expand...
Click to collapse
The links arent working..
Tried this: uninstalled everything and installed busybox via Smart install, then installed Viperaudio and the driver.
Restarted my device and it still isnt working ... hmmpf
When i play a song with poweramp it doenst work (no sound)
When i uncheck the first option in Viper (V4A-SpeakerFX) the sound is back!
When i check the setting to "on" my sound is gone :/
If you have it up and running, did you encounter some issues with the volume level? I fell that it's the same level audio in headphones even if it's 10% or 100%.. While running the stock settings, it works fine..
I found that viper audio does not work with downloaded songs in Google music or music unlimited. It works only when streaming which is useless to me.
Sent from my VS980 4G using XDA Premium 4 mobile app
harveydwijs2 said:
The links arent working..
Tried this: uninstalled everything and installed busybox via Smart install, then installed Viperaudio and the driver.
Restarted my device and it still isnt working ... hmmpf
When i play a song with poweramp it doenst work (no sound)
When i uncheck the first option in Viper (V4A-SpeakerFX) the sound is back!
When i check the setting to "on" my sound is gone :/
Click to expand...
Click to collapse
Tutorial/files:
http://forum.xda-developers.com/showthread.php?t=2456073&referrerid=3638425
Audio settings once working:
http://forum.xda-developers.com/showthread.php?t=2324454&referrerid=3638425
Sorry I just got back from work. These are the correct links
TehJorge said:
Tutorial/files:
http://forum.xda-developers.com/showthread.php?t=2456073&referrerid=3638425
Audio settings once working:
http://forum.xda-developers.com/showthread.php?t=2324454&referrerid=3638425
Sorry I just got back from work. These are the correct links
Click to expand...
Click to collapse
I have really no clue what to do right now... as i said, my main language isn't Engllish so i have a hard time to understand it
I tried it again and a popup comes on my device saying: "effect control failure try to reload driver"
Could you tell me step by step what you did to make it work? :laugh::laugh::laugh:
Cause i really don't have a clue what to do right now
up
Uninstall driver(s) first than uninstall app(s).
http://forum.xda-developers.com/showthread.php?t=2456073
If you have any other questions you can ask in thread above or OT. Good luck!

Viper 4 android

Can't handle the sound on this phone. How do we get viper to work?
jkieffer46 said:
Can't handle the sound on this phone. How do we get viper to work?
Click to expand...
Click to collapse
Download ExperienceOS Add-on Aroma 5.0 and flash Divine Beats Audio mod here: https://forum.xda-developers.com/oneplus-5/development/rom-experienceos-r1-0-lite-addon-t3626657
Simpliest way :
- Download and install Busybox on your phone.
- Set SELINUX to permissive mode.
- Download and flash this Viper4android Zip : www.androidfilehost.com/?fid=745425885120697254
Normally all should be working. (Maybe open Viper4android app and install the driver first)
Also don't forget tout uninstall or disable any other audiofx you have.
(I know it's still the 2.4.0.1 version but it's still my fav)
Uninstall any viper APK and flash this on twrp...
cultofluna said:
Uninstall any viper APK and flash this on twrp...
Click to expand...
Click to collapse
Does this work while encrypted? Also does it require any additional file tweaking or driver installation?
HDash said:
Does this work while encrypted? Also does it require any additional file tweaking or driver installation?
Click to expand...
Click to collapse
Just flash on twrp...working great ...
After flashing you get the viper icon on your drawer...
Just open it and enable ..
Viper for OnePlus 5
cultofluna said:
Uninstall any viper APK and flash this on twrp...
Click to expand...
Click to collapse
Works like a charm! ?
Thank you so much.
Cheers
It is working for me only if I set SELinux to permissive. Tried so many diffirent builds. The last one is ViPER4Android_2.5.0.5_guitardedhero.zip.
(used the guide from here: http://andxda.blogspot.com/2016/09/how-to-install-viper4android-on-android.html)
Did someone have a success to run viper4android in selinux Enforcing mode !?
polzovotel said:
It is working for me only if I set SELinux to permissive. Tried so many diffirent builds. The last one is ViPER4Android_2.5.0.5_guitardedhero.zip.
(used the guide from here: http://andxda.blogspot.com/2016/09/how-to-install-viper4android-on-android.html)
Did someone have a success to run viper4android in selinux Enforcing mode !?
Click to expand...
Click to collapse
I have no idea about the SELinux modes but I just flashed the Deutronomy zip without changing anything else and now it works perfectly
What ROM are you using ? OxygenOS 4.5.8 ?
---------- Post added at 03:10 PM ---------- Previous post was at 02:38 PM ----------
cultofluna said:
Uninstall any viper APK and flash this on twrp...
Click to expand...
Click to collapse
I am running OxygenOS 4.5.8. Root and BusyBox is installed. I flashed this zip but still get:
Enabled: No
Status: Abnormal
The same second I change SULinux to permissive - all start working fine....
Another Method
Hey Guys,
so I found another way to get V4A working.
Worked for me on enforcing too, but i couldn't test it 100% because my ROM is permissive.
This Viper version is called Viper FX and has the same features as V4A by guitardedhero.
It is a Magisk module so u need to be rooted with Magisk to get this working.
ViperFX:
https://forum.xda-developers.com/apps/magisk/viperfx-mkm-magisk-t3535401
I also found another very usefull Module called Universal deep_buffer remover.
This Module allows you to use Viper FX with streaming apps (e.g. Soundcloud, Pandora, ...) which are normally not affected by Viper.
Universal deep_buffer remover:
https://forum.xda-developers.com/apps/magisk/module-universal-deepbuffer-remover-t3577067
Hope I could help!
henrikh1998 said:
Hey Guys,
so I found another way to get V4A working.
Worked for me on enforcing too, but i couldn't test it 100% because my ROM is permissive.
This Viper version is called Viper FX and has the same features as V4A by guitardedhero.
It is a Magisk module so u need to be rooted with Magisk to get this working.
ViperFX:
https://forum.xda-developers.com/apps/magisk/viperfx-mkm-magisk-t3535401
I also found another very usefull Module called Universal deep_buffer remover.
This Module allows you to use Viper FX with streaming apps (e.g. Soundcloud, Pandora, ...) which are normally not affected by Viper.
Universal deep_buffer remover:
https://forum.xda-developers.com/apps/magisk/module-universal-deepbuffer-remover-t3577067
Hope I could help!
Click to expand...
Click to collapse
i download from magisk download after flash i reboot but still logo oneplus!!!
guide me!
cultofluna said:
Uninstall any viper APK and flash this on twrp...
Click to expand...
Click to collapse
excuse me, do i need to be rooted? or at least unlock the bootloader?
I will be creating a thread for simplest and proper viper4android installation on OxygenOS in my free time soon.
---------- Post added at 05:11 AM ---------- Previous post was at 05:07 AM ----------
Watch out in the Guides, New & Discussions section for my guide, thread to be posted soon.
ivongolia said:
excuse me, do i need to be rooted? or at least unlock the bootloader?
Click to expand...
Click to collapse
You need to unlock the bootloader and install custom recovery to install this ..
henrikh1998 said:
Hey Guys,
so I found another way to get V4A working.
Worked for me on enforcing too, but i couldn't test it 100% because my ROM is permissive.
This Viper version is called Viper FX and has the same features as V4A by guitardedhero.
It is a Magisk module so u need to be rooted with Magisk to get this working.
ViperFX:
https://forum.xda-developers.com/apps/magisk/viperfx-mkm-magisk-t3535401
I also found another very usefull Module called Universal deep_buffer remover.
This Module allows you to use Viper FX with streaming apps (e.g. Soundcloud, Pandora, ...) which are normally not affected by Viper.
Universal deep_buffer remover:
https://forum.xda-developers.com/apps/magisk/module-universal-deepbuffer-remover-t3577067
Hope I could help!
Click to expand...
Click to collapse
Tried the version in Magisk repo, but nothing happend after reboot. I can see the module in magisk but no Viper4Android-app. So I did a delete in Magisk Manager. Also, the thread is closed now.
Going to try install V4A via TWRP and his new module.
https://forum.xda-developers.com/apps/magisk/alienoidos-t3660485
Update:
Didn't work for me. No V4A-app, so I installed it manually and it tolds me to install drivers, did that reboot and it still said install drivers.
I'm on latest OOS with Magisk 13.3
I have a OnePlus 5, so you guys ought to be in good shape. The zip attached below is intended to work perfectly for Magisk and SuperSU users in Enforcing SELinux Mode.
In fact, if genuine init.d support is obtained (I've been trying for weeks now...), no root will be necessary at all.
BusyBox is already unnecessary for any installation scenario, though. Of course, I mean unnecessary for ViPER4Android. BusyBox has its uses elsewhere in Android. :good:
guitardedhero said:
I have a OnePlus 5, so you guys ought to be in good shape. The zip attached below is intended to work perfectly for Magisk and SuperSU users in Enforcing SELinux Mode.
In fact, if genuine init.d support is obtained (I've been trying for weeks now...), no root will be necessary at all.
BusyBox is already unnecessary for any installation scenario, though. Of course, I mean unnecessary for ViPER4Android. BusyBox has its uses elsewhere in Android. :good:
Click to expand...
Click to collapse
Thx for your share and clarification.
However, I'm really confuse by all these different realeases : Viper4Android, Viper4Arisee ViperFX, ...
I really don't know which one to install
guitardedhero said:
I have a OnePlus 5, so you guys ought to be in good shape. The zip attached below is intended to work perfectly for Magisk and SuperSU users in Enforcing SELinux Mode.
In fact, if genuine init.d support is obtained (I've been trying for weeks now...), no root will be necessary at all.
BusyBox is already unnecessary for any installation scenario, though. Of course, I mean unnecessary for ViPER4Android. BusyBox has its uses elsewhere in Android. :good:
Click to expand...
Click to collapse
Dunno why but still the same problem.
Seeing the module in Magish (flashed via TWRP) but no V4A-app.
Should i dirty flash my ROM* and try again maybe?
* 4.5.8: OnePlus5Oxygen_23_OTA_013_all_1708032241_9a87b4.zi p
chrissss91 said:
Thx for your share and clarification.
However, I'm really confuse by all these different realeases : Viper4Android, Viper4Arisee ViperFX, ...
I really don't know which one to install
Click to expand...
Click to collapse
You're not alone.
ViPER4Arise is merely a themed version of ViPER4Android and ViperFX designed for the ARISE Sound Systems™ project.
ViperFX is merely the current 2.5.0.5 version of what is known previously as ViPER4Android, although it hasn't quite caught on obviously. This slight name change was a part of much bigger and impactful changes such as the official website address/domain, for example. :good:
acrylamid said:
Dunno why but still the same problem.
Seeing the module in Magish (flashed via TWRP) but no V4A-app.
Should i dirty flash my ROM* and try again maybe?
* 4.5.8: OnePlus5Oxygen_23_OTA_013_all_1708032241_9a87b4.zi p
Click to expand...
Click to collapse
Lol yeah, that is certainly not the intended outcome. At least we now know it is something on your end, most likely Magisk-related, although an existing v4a data or system installation can produce those same results.
I recommend a factory-reset in TWRP followed by an OOS-4.5.8 flash whenever it feels like a good time to do so, or at least uninstall and reinstall Magisk if nothing else.
We'll get you going, don't you worry. :good:

XPERIA Z2(D6503)-Audio fx not working on RR-6.0 Rev-2.

Dear Sir,opendata, rcstar6696, akshay2shah, iXaidyiu....
i 've install RR-6.0 rev-2 Official.zip rom on my Xperia Z2 D6503.
everythings is fine but ,any Audio fx (Like System audio fx,Dolby Atmos,Viper4Android and any other)Not opening.flash the dolby atmos(Oreo & Normal)but Device not boot up.Please Fix The problame.I mostly like the rom.please,please,please fix it....
srifal said:
Dear Sir,opendata, rcstar6696, akshay2shah, iXaidyiu....
i 've install RR-6.0 rev-2 Official.zip rom on my Xperia Z2 D6503.
everythings is fine but ,any Audio fx (Like System audio fx,Dolby Atmos,Viper4Android and any other)Not opening.flash the dolby atmos(Oreo & Normal)but Device not boot up.Please Fix The problame.I mostly like the rom.please,please,please fix it....
Click to expand...
Click to collapse
Viper 4 Android works fine when you use Magisk v16 and install it from the Magisk app Module section.
Choose Shadysquirrel's module.
Make sure you do a fresh install of The RR rom since you might have just too much installed and thing's got borked up.
And to be sure you also might Freeze the audio fx app (didn't had to do it tough)
Hope that helps
Skolotaie,,I will try Sir,But not working v4a.again and again wanting V4a driver installing on every boot up.My Phone is unning without any audio fx on this rom.
srifal said:
Skolotaie,,I will try Sir,But not working v4a.again and again wanting V4a driver installing on every boot up.My Phone is unning without any audio fx on this rom.
Click to expand...
Click to collapse
remove V4a
Install busybox first ..reboot
Install V4a..reboot .done
Skolotaie Sir...Thanks,Finally ur tricks work on my device.Thank u so match.

Viper4Android on the Redmi Note 7

Hello there, I've been trying to get the viper4android but it just keep asking me to install the driver.
I've tried with the magisk module and the xda labs version (which looks awesome btw).
I'm on magisk 19.0
My rom is xiaomi.eu 10.4
Any ideas?
Just install a Magisk module or a script to set SeLinux as Permissive. I am using it right now and everything works great.
thunderteaser said:
Just install a Magisk module or a script to set SeLinux as Permissive. I am using it right now and everything works great.
Click to expand...
Click to collapse
huh? can you pm me the module? i cant seem to find it online.
Zontos said:
huh? can you pm me the module? i cant seem to find it online.
Click to expand...
Click to collapse
open magisk manager and go to downloads and search for viper4android, then install. it works just fine.
thunderteaser said:
Just install a Magisk module or a script to set SeLinux as Permissive. I am using it right now and everything works great.
Click to expand...
Click to collapse
I've had trouble installing it, too. Tried every rom posted on this forum, stock MIUI, and some GSI, and in none of them I could get V4A working. Used Magisk Module, too.
Could you please ellaborate how you installed it? Which rom? Which Magisk/V4A version?
Viper is literally the only thing I'm missing from my previous phone; I'd reeeally like to enjoy it again!
metroid2010 said:
I've had trouble installing it, too. Tried every rom posted on this forum, stock MIUI, and some GSI, and in none of them I could get V4A working. Used Magisk Module, too.
Could you please ellaborate how you installed it? Which rom? Which Magisk/V4A version?
Viper is literally the only thing I'm missing from my previous phone; I'd reeeally like to enjoy it again!
Click to expand...
Click to collapse
Have you tried using the XDA Labs version? I had the same problems and that worked pretty well
AdRi_232 said:
Have you tried using the XDA Labs version? I had the same problems and that worked pretty well
Click to expand...
Click to collapse
Yes, I tried that one as well. Always the same error: "No driver installed", press yes, restart phone, and back to "no driver installed" again.
Which busybox version are you using?
Ok, I finally got it.
I'll write it here for anyone with the same problem, or for future reference.
First, check that you have BusyBox installed.
Then, in Magisk Manager, install the Audio Modification Library. Reboot.
In Magisk Manager again, install the Viper4Android module. Install options: new driver, old interface, user app, library workaround no, oneplus 3 workaround yes. Reboot.
Check opening the app, it should work normally, with no "driver not found" errors.
Notes: tried with letsmakecake's Lineage 16. People in the RN7 Telegram group recommend busybox.zip, but I confirm that the stericson app works the same.
If anyone has problems making it work with Poweramp: settings->audio->advanced->
- Direct Volume Control: disabled
- MusicFX: enabled
Then go to the eq screen, second tab, press MusicFX so it's enabled.
Thanks all who helped, and the V4A devs. This is the best audio tweak mod available for Android, hands down.
Personal recommendation: try the Dolby Pro Logic II irs in the convolver!
metroid2010 said:
First, check that you have BusyBox installed.
Click to expand...
Click to collapse
Thanks for guide I will try it.
EDIT: Working fine, thank you
I tried this method and it does not work
---------- Post added at 11:11 AM ---------- Previous post was at 11:09 AM ----------
metroid2010 said:
Ok, I finally got it.
I'll write it here for anyone with the same problem, or for future reference.
First, check that you have BusyBox installed.
Then, in Magisk Manager, install the Audio Modification Library. Reboot.
In Magisk Manager again, install the Viper4Android module. Install options: new driver, old interface, user app, library workaround no, oneplus 3 workaround yes. Reboot.
Check opening the app, it should work normally, with no "driver not found" errors.
Notes: tried with letsmakecake's Lineage 16. People in the RN7 Telegram group recommend busybox.zip, but I confirm that the stericson app works the same.
If anyone has problems making it work with Poweramp: settings->audio->advanced->
- Direct Volume Control: disabled
- MusicFX: enabled
Then go to the eq screen, second tab, press MusicFX so it's enabled.
Thanks all who helped, and the V4A devs. This is the best audio tweak mod available for Android, hands down.
Personal recommendation: try the Dolby Pro Logic II irs in the convolver!
Click to expand...
Click to collapse
what exact version did you use? I tried it with the latest legacy from magisk app and most of the options were changed. and I couldnt get it to work on the RN7
metroid2010 said:
Ok, I finally got it.
I'll write it here for anyone with the same problem, or for future reference.
First, check that you have BusyBox installed.
Then, in Magisk Manager, install the Audio Modification Library. Reboot.
In Magisk Manager again, install the Viper4Android module. Install options: new driver, old interface, user app, library workaround no, oneplus 3 workaround yes. Reboot.
Check opening the app, it should work normally, with no "driver not found" errors.
Notes: tried with letsmakecake's Lineage 16. People in the RN7 Telegram group recommend busybox.zip, but I confirm that the stericson app works the same.
If anyone has problems making it work with Poweramp: settings->audio->advanced->
- Direct Volume Control: disabled
- MusicFX: enabled
Then go to the eq screen, second tab, press MusicFX so it's enabled.
Thanks all who helped, and the V4A devs. This is the best audio tweak mod available for Android, hands down.
Personal recommendation: try the Dolby Pro Logic II irs in the convolver!
Click to expand...
Click to collapse
Alright, can confirm this works, with some minor differences:
-new interface (just personal preference)
-library workaround was applied automatically
I also have selinux permissive and MusicFX disabled (app frozen).
The package I used is Viper4Android FX Legacy. The new version, Viper4Android 2.7, did not work for me.
My ROM is HavocOS.

Question about Viper

I use Amazon Music with Viper Mod and Dolby. The problem I have is when I start playing my music I have to go into the Viper app. As soon as I open the app Viper kicks in.
Is there something I can do to kick Viper in automatically?
Hi, re-instak and follow instructions, instal as system app, u mess a step
Honeslty, I have never been able to get Viper working fully on my 6t. You might want to try removing the optimization in settings to see if that will let the app continue running. I think OOS just disables it after you don't have anything playing for a while.
I mainly play on my car Bluetooth when I am driving mostly a volume issue but do like surround sound as well
Have you tried making Viper a system app so that the process won't continually get killed?
Causical said:
Have you tried making Viper a system app so that the process won't continually get killed?
Click to expand...
Click to collapse
When installing Viper4Android 2.7 it doesn't give me any options just installs it, FX Legacy I can't seem to get to work
I moved it to system with terminal emulator so we'll see.
Install viper as a magisk module. Select as system app
Runs fantastic on my 6T
mmarcz said:
Install viper as a magisk module. Select as system app
Runs fantastic on my 6T
Click to expand...
Click to collapse
Viper4Android FX 2.7.1.0 doesn't give me a option to select anything, It just installs completely and then says to reboot. I downloaded App Systemizer (Terminal Emulator} and moved it to system and now you are right it is running fantastic.
PapaMag said:
Viper4Android FX 2.7.1.0 doesn't give me a option to select anything, It just installs completely and then says to reboot. I downloaded App Systemizer (Terminal Emulator} and moved it to system and now you are right it is running fantastic.
Click to expand...
Click to collapse
As a follow-up, about a day after I had posted, my viper stopped working. So I deleted the plug-in in magisk, and reinstalled 2.7.1.0 fresh and it's been work ever since! I apologise if I came off flippant at all. Seems they changed / updated something and that had to be done.
mmarcz said:
As a follow-up, about a day after I had posted, my viper stopped working. So I deleted the plug-in in magisk, and reinstalled 2.7.1.0 fresh and it's been work ever since! I apologise if I came off flippant at all. Seems they changed / updated something and that had to be done.
Click to expand...
Click to collapse
No need to apologize after a few times of uninstall and reinstall I gave up. Between my Bose Stereo settings in my car and the phone settings I get really good sound so I'm good.

Categories

Resources