issues while attempting to root... - AT&T Samsung Galaxy S7 Edge Questions & Answers

Hello there all, for the past few hours I've been attempting to root my AT&T Samsung Galaxy S7 Edge (SAMSUNG-SM-G935A). I have had several issues with this process that I am going to detail below, any and help is very, very appreciated.
I believe I have tried this four to five times, to no avail, and each time it has gotten somewhat better I believe.
The first time, I got through the process of using ODIN correctly, it displayed me with the PASS graphic and I continued onward. I went on to the Fast Boot step where I attempted to install SuperSU and it looked like it had worked to me, but this was my first attempt so that honestly doesn't mean much. Anyway, I opened up my phone, SuperSU was not there, and I used the Root Checker. The Root Checker told me it hadn't installed correctly. I pondered for a bit as to what I should do and ran the process again from the beginning. However, the second time I swapped to a better USB port on my PC and there was a difference in the performance of Fast Boot, and SuperSU had installed. I went to my Root Checker, and it again told me that there was no root. I believe I tried once more, I then Factory Reset my device. After I did this, I went through the same process again, following along perfectly to text directions and video tutorials and it installed SuperSU, but no root was there.
I believe I may have done it once or twice since the Factory Reset. Another thing I would like to note about this process was that from the very beginning it has given me the "symptoms of a root". By this I mean the lag, different icons in the carrier bar up top, and possibly more. One other thing I noticed was that even when I had Factory Reset my device, it still gave me the icon on my start up screen. The icon that shows the unlocked lock and says "custom" beneath it.
As I said in the beginning, any and all help is greatly appreciated. Thank you all in advance!

Related

I goofed, and I don't know how I did it

Last evening, I put a new ROM on my phone, which has been rooted for quite some time running Goldeneye with no issues prior to earlier this week, and the rom installed without a problem, but when I went to flash an addon for the rom that came from the dev, the entire thing went south. I was using TWRP which is what's been on the phone since it was rooted, I do NOT have MF3 on the phone however after this install through TWRP, the phone how has the unlock icon on it, and won't boot past the samsung screen. If I try to get into recovery, it boots into odin, and freezes. I tried to do a recovery through Kies, and it just says connecting, then says the phone is not responding. For the first time since I've owned this phone, I feel well and truly stuck. Any help would be greatly appreciated, since after almost two years of rooting and installing ROMS on various devices from Samsung, HTC and Motorola, I made a mistake somewhere along the way and I am not even sure what the hell I managed to do, and the multiple forums I've been reading on here don't seem to be getting me anyplace. Apologies if this is a repeat and I missed a simple solution somewhere, but I've been at this for almost two hours now, so time to swallow the pride...
Think I figured it out
Well after writing this, for my own personal sense of masochism and an overall morbid curiosity, I kept reading, and figured out how to get the phone to actually boot into proper recovery mode (as in NOT Odin), and was able to get a ROM back on the phone, as I didn't care for any of the nandroids I had there. As I am not sure that anyone actually viewed this before I resolved my own issue much less had a chance to respond, it's not appropriate to thank anyone for solving my own problem, except for the poster of the thing that I read which led to my resolution, but I will throw out a blanket thank you to all those that take the time to develop, write, and help others solve the stupid stuff, it is appreciated, at least by this Ohioan, who sometimes manages to get in over his head!
dsly4425 said:
Last evening, I put a new ROM on my phone, which has been rooted for quite some time running Goldeneye with no issues prior to earlier this week, and the rom installed without a problem, but when I went to flash an addon for the rom that came from the dev, the entire thing went south. I was using TWRP which is what's been on the phone since it was rooted, I do NOT have MF3 on the phone however after this install through TWRP, the phone how has the unlock icon on it, and won't boot past the samsung screen. If I try to get into recovery, it boots into odin, and freezes. I tried to do a recovery through Kies, and it just says connecting, then says the phone is not responding. For the first time since I've owned this phone, I feel well and truly stuck. Any help would be greatly appreciated, since after almost two years of rooting and installing ROMS on various devices from Samsung, HTC and Motorola, I made a mistake somewhere along the way and I am not even sure what the hell I managed to do, and the multiple forums I've been reading on here don't seem to be getting me anyplace. Apologies if this is a repeat and I missed a simple solution somewhere, but I've been at this for almost two hours now, so time to swallow the pride...
Click to expand...
Click to collapse

Made errors during manual root. Still got through, should I worry?

Hello everyone. First post, and kind of new to working with roots and ROMS etc.
Got my LG G2 a couple months ago, and I've never been happier with a phone. Great screen, performance, battery, the whole shebang.
Tonight I decided that I wanted to try something new. So I looked into the Xposed Framework and their G2 Xposed application. In order for these to work, a root was in order, and I tried following the root guides found here:
http://forum.xda-developers.com/showthread.php?p=45692679#post45692679
However, the automatic root.bat file would not work for me, as it detected an emulator on my desktop computer (I have no idea why, never used it for app development). So i had to run through the manual command prompt guide found here:
http://forum.xda-developers.com/showpost.php?p=48709232&postcount=869
However, due to me being tired, I had to re-do it a couple times due to typing errors during steps 8-12 (I switched su and daemonsu a couple times without thinking). Nothing happened upon pressing enter, and I got an error prompt when trying to initialize the root until I got it right, and it works fine with the Xposed apps and modules now.
I now just want to make sure my butter-fingerness hasn't adversly affected batterylife or storage or similar.
Can someone help me put my mind at ease? I seem to have increased battery-drain after the root and installation of the Xposed framework and apps, but whether this is due to the framework or possibly the botched root, I can't say. Will have to see tomorrow from a full charge and more normal use if it continues.
Best Regards

No root access, cannot update, no way to fastboot.

Okay guys, I need your help. I wanted to return to complete stock and update to newest version. So I downloaded a stock ROM and let it flash the stock recovery. I got a notification for 4.3 update and went ahead and flashed that sucker. During the installation, up popped "Error". It stayed frozen on that screen, so I hard rest it, and restarted my nexus. Well, the installation went through fine. Disabled super user and went about trying to force the 4.4.2 update. Sure enough that kicked in as well. Now, I also got the error on installation of that as well, but this time, when I rebooted, it was still 4.3. I've gone through it about 10 times now. And it gives me the error every single time and remains 4.3. I did a little googling and found out how to get there error log, and it says unexpected content in boot animation.zip.
Unfortunately one of my data pins is busted in my Nexus's USB port, so connecting to PC is not an option for me. Plus my PC is down for the count until I can get a new motherboard in her. Is there anyway to obtain root without connecting to a PC on 4.3 or at least get the update to take?
Is there possibly anyway to wirelessly adb from another android device? Would that even help in my situation?
I've tried " root master" and it seemed to work, even made the Chinese root permissions manager(as a system app) for me, but I can't grant access to anything, nor am I even give the option to. Also, when I tried that, it kicked SuperSU out of system and into regular old data apps.
I suppose I can just stick with 4.3, but if you guys could, I'd love some help.

[Q] sgh 1337 UN stuck on Samsung splash screen (safe strap broken)

So, I have gotten myself in a bit of a pickle I however think I can get out of it by sideloading using EXT. SD, Im not sure what to flash to solve the dillemma however. So this is the situation. I have a (had) a rooted Galaxy s4 (sgh-i337 ucufnc1) with 4.4.2 android. It had safestrap installed and back ups of everything else in sd card and other locations just in case. The phone was acting buggy, so I formatted the phone with safestrap, the problem persisted, ill get into the issue a bit further down. So I booted back into safestrap, and did a complete wipe, however my sd card must've bumped out, because it didnt delete any media files or so it said, and then after the wipe it crashed. and refuses to boot into safestrap or even past the splash logo. I can get into download mode, but usb debugging isnt on anymore since i wiped it, I can get into the other mode as well ( cant for the life of me remember the name of it atm although i use it frequently) with some luck. I also happen to have all .md5 files from a backup i did about 4 months ago in tact, I cannot for the life of me get them to convert properly to apply them to the phone without safestrap however, if anyone has any insight to this please let me know also.
I can/will list any other information I have if anyone needs it, and if anyone can help it would safe a life!
The reason i reformatted it to begin with, was because media would stall, and when i plugged in the audio jack it'd freeze the entire app using it, then the whole phone would freeze. I believe it was due to lucky patcher but im unsure. The issue began when I altered the auto update file, and even after i rectified it, it persisted. At this time i have a phone soft bricked because it didnt delete all the media files and I assume something bugged onto the kernel image but Im not sure. If I can simply try to restore it to stock kernel then im fine with that.
Ghujii said:
So, I have gotten myself in a bit of a pickle I however think I can get out of it by sideloading using EXT. SD, Im not sure what to flash to solve the dillemma however. So this is the situation. I have a (had) a rooted Galaxy s4 (sgh-i337 ucufnc1) with 4.4.2 android. It had safestrap installed and back ups of everything else in sd card and other locations just in case. The phone was acting buggy, so I formatted the phone with safestrap, the problem persisted, ill get into the issue a bit further down. So I booted back into safestrap, and did a complete wipe, however my sd card must've bumped out, because it didnt delete any media files or so it said, and then after the wipe it crashed. and refuses to boot into safestrap or even past the splash logo. I can get into download mode, but usb debugging isnt on anymore since i wiped it, I can get into the other mode as well ( cant for the life of me remember the name of it atm although i use it frequently) with some luck. I also happen to have all .md5 files from a backup i did about 4 months ago in tact, I cannot for the life of me get them to convert properly to apply them to the phone without safestrap however, if anyone has any insight to this please let me know also.
I can/will list any other information I have if anyone needs it, and if anyone can help it would safe a life!
The reason i reformatted it to begin with, was because media would stall, and when i plugged in the audio jack it'd freeze the entire app using it, then the whole phone would freeze. I believe it was due to lucky patcher but im unsure. The issue began when I altered the auto update file, and even after i rectified it, it persisted. At this time i have a phone soft bricked because it didnt delete all the media files and I assume something bugged onto the kernel image but Im not sure. If I can simply try to restore it to stock kernel then im fine with that.
Click to expand...
Click to collapse
UPDATE: I resolved the issue, by rooting, safestrapping, ripping the image files, from another galaxy s4 with alike descriptions. then i managed to side load it, then it booted properly, i then reformatted it completely back to 100% factory everything. Now my original problem persists, and i cant help feel that google services is causing it. (examnples of issues" proccess.gapps has stopped. anotrher process error code. phone calls can be made, but not recieved as it seems the server is too busy to n otice it, massive battery drain, audio takes several seconds to play, while video continues to play fine, audiojack is mostly unresponsive, phone calls that are made cannot recieve or send audio during call session, phone may freeze at unlock screen, or any time during operation, may even reboot from process overloading" now keep in mind. i removed every system file and app that the natural reformat will allow. so nothing applied by the user is on the phone, other than natural factory applications. Im digging a bit into the phone as i can but its a slow process whenit starts freezing. if anyone has any idea of what can be causing this, or how to fix this please inform me lol.
Ghujii said:
UPDATE: I resolved the issue, by rooting, safestrapping, ripping the image files, from another galaxy s4 with alike descriptions. then i managed to side load it, then it booted properly, i then reformatted it completely back to 100% factory everything. Now my original problem persists, and i cant help feel that google services is causing it. (examnples of issues" proccess.gapps has stopped. anotrher process error code. phone calls can be made, but not recieved as it seems the server is too busy to n otice it, massive battery drain, audio takes several seconds to play, while video continues to play fine, audiojack is mostly unresponsive, phone calls that are made cannot recieve or send audio during call session, phone may freeze at unlock screen, or any time during operation, may even reboot from process overloading" now keep in mind. i removed every system file and app that the natural reformat will allow. so nothing applied by the user is on the phone, other than natural factory applications. Im digging a bit into the phone as i can but its a slow process whenit starts freezing. if anyone has any idea of what can be causing this, or how to fix this please inform me lol.
Click to expand...
Click to collapse
The best solution must be installing the stock firmware via odin. Since you are on NC1 , You can installed the stock NB1.
Here is guide explaining you using odin, installing NB1, root with towel root, updated NC1, install the safestrap. The guide was not specifically written for that but you can find those steps in the guide.
I will attempt to do this, since nothing since has work. I am about to get a new logic board for the system in the next 2 weeks. Towel root DOES typically work on this system, however the last time I attmpted it it failed to work outright. Im not sure what has changed with the device, but i believe reflashing stock is the best method. The phone now, will boot up, then skip the lock screen and go straight to the home screen, which is black with no pull down bar, or with no signal and there is no way to rectify it. Even if there were, it boots back down and launches back up and becomes locked at the ATT logo.
After a fair bit of messing with it, and recovery mode it will sometimes boot normally where it tells me that processes has failed and askes me to cancel the ''app''. This is the best option to update the phone and attempt root, but getting it here is so difficult because it reboots itself and the mode is rare to acquire. This problem either is due to the kernel, or the rom i believe. I also am to believe the powercell may have some issue, as i replaced the battery a few weeks back and it worked fine for about 1 week.
Booting into safemode doesnt work either as it skips over the lock screen straight to the home screen. Outsidce of replacing the logic board, or attempting another flash im at the end of the short rope i was already on in terms of options.
sway8966 said:
The best solution must be installing the stock firmware via odin. Since you are on NC1 , You can installed the stock NB1.
Here is guide explaining you using odin, installing NB1, root with towel root, updated NC1, install the safestrap. The guide was not specifically written for that but you can find those steps in the guide.
Click to expand...
Click to collapse
UPDATE: I found therein two methods to flashback to stock. I did so, then proceeded to attempt to flash from nb1 to nj4. Progress stopped there when it flung an error 7 at me. So this means either something in my phone is corrupted or the file i downloaded from the above mentioned forum is corrupted. I also attempted flashfire, but seen as it STILL crashes at random due to process errors thats almost impossible to attempt.

What changed? Why could I root before, but not now?

I've spent a full day on this and no further ahead.
This is my wife's phone. A few months back (after Lollipop update) she was running into problems that I needed root to solve. I was lazy and tried Kingo Root and it worked on the first shot. Golden.
No problem but I screwed something up by being overzealous with deleting system apps and her cell data stopped working.
No biggie, I unrooted and did a factory reset and all seemed fine. But now I go to root it and... can't. Kingo Root fails.
Why?
But beyond that, I've followed every other tutorial on various other methods and every attempt ends in failure (stalls at startup screen, pre-animation. I've waited >1hr). I've had to reflash stock ROM several times.
In the stock bootloader under Check Root it says the bootloader is locked.
I've put on TWRP no problem, but that's what seems to stall the boot. I've read that TWRP is problematic with this phone and to use CWR (?) instead, but every link is dead, every tutorial regarding it is sketchy.
Advice?

Categories

Resources