Related
Hi,
I rooted my ZTE Axon 7 UK version, A2017G and i accidentally formatted the system, currently i have the US version of the software running but i dont have any WIFI
thanks for the help in advance
Can't help you with the European system
But have you tried flashing B20 boot.img from tenfar tool ? Might solve your wifi issue...
If that works, it's awesome !
shia786 said:
Hi,
I rooted my ZTE Axon 7 UK version, A2017G and i accidentally formatted the system, currently i have the US version of the software running but i dont have any WIFI
thanks for the help in advance
Click to expand...
Click to collapse
djona12 said:
Can't help you with the European system
But have you tried flashing B20 boot.img from tenfar tool ? Might solve your wifi issue...
If that works, it's awesome !
Click to expand...
Click to collapse
the A2017G have a FULL FACTORY UPDATE IMAGE (B02) you guys are actually lucky in that department, us A2017U we wish had one.
here : http://forum.xda-developers.com/axon-7/how-to/a2017g-b02-update-released-europe-t3440619
i cannot seem to find tenfar tool anywhere
DrakenFX said:
the A2017G have a FULL FACTORY UPDATE IMAGE (B02) you guys are actually lucky in that department, us A2017U we wish had one.
here : http://forum.xda-developers.com/axon-7/how-to/a2017g-b02-update-released-europe-t3440619
Click to expand...
Click to collapse
i have found the tool but i think i flashed the US version of the boot image now my phone does not boot up at all,
it goes to stock recovery
if i turn the phone on then it goes to ZTE LOGO for about half a second then the screen goes blank
i can access fastboot but only through stock recovery which when i go to bootloader i cannot run any fastboot commands, even if i run fastboot reboot it does not reboot the phone at all
shia786 said:
i cannot seem to find tenfar tool anywhere
Click to expand...
Click to collapse
Got the same problem, i've formatted the system and now i can only go to the stock recovery, i can't reboot to edl mode by pressing both volume buttons doing this a Handset Diagnostic Interface (DFU) appears in my Device Manager instead of Qualcomm USB device, so i can't install a TWRP.
shia786 said:
i cannot seem to find tenfar tool anywhere
Click to expand...
Click to collapse
Cricius said:
Got the same problem, i've formatted the system and now i can only go to the stock recovery, i can't reboot to edl mode by pressing both volume buttons doing this a Handset Diagnostic Interface (DFU) appears in my Device Manager instead of Qualcomm USB device, so i can't install a TWRP.
Click to expand...
Click to collapse
As I said before, YOU GUYS have full update file posted the link (thread) about... You DON'T need @tenfar tools to use the FULL A2017G update (B02) , download the file (like 2.2gb I guess) and flashed using stock recovery.
DrakenFX said:
As I said before, YOU GUYS have full update file posted the link (thread) about... You DON'T need @tenfar tools to use the FULL A2017G update (B02) , download the file (like 2.2gb I guess) and flashed using stock recovery.
Click to expand...
Click to collapse
When I press update from SD card it comes up with cannot update from SD card, when I try to do ADB side load and says cannot read file
shia786 said:
When I press update from SD card it comes up with cannot update from SD card, when I try to do ADB side load and says cannot read file
Click to expand...
Click to collapse
Try enable " OEM Unlocking " under developers option and try again
DrakenFX said:
Try enable " OEM Unlocking " under developers option and try again
Click to expand...
Click to collapse
I cannot access the software at all, all I got is stock recovery
shia786 said:
I cannot access the software at all, all I got is stock recovery
Click to expand...
Click to collapse
Try using that same full update with twrp,
As title said you can boot only to TWRP? From there you may be able to flash the zip.
DrakenFX said:
Try using that same full update with twrp,
As title said you can boot only to TWRP? From there you may be able to flash the zip.
Click to expand...
Click to collapse
I no longer have access to TWRP recovery as I flashed stock recovery to install the firmware file using stock recovery but somehow the os got screwed up and now the only thing I have access to is stock recovery
shia786 said:
I no longer have access to TWRP recovery as I flashed stock recovery to install the firmware file using stock recovery but somehow the os got screwed up and now the only thing I have access to is stock recovery
Click to expand...
Click to collapse
You can just boot into TWRP using tenfar tools and Flash the zip.
DrakenFX said:
You can just boot into TWRP using tenfar tools and Flash the zip.
Click to expand...
Click to collapse
For me to use the tool I need to access the phone in edl mode which I cannot do because I do not have access to ADB
shia786 said:
For me to use the tool I need to access the phone in edl mode which I cannot do because I do not have access to ADB
Click to expand...
Click to collapse
and not having access to adb, you meant don't have a PC/Laptop?
Cuz there is an alternative way how to boot to " edl "
- turn your phone completely off
- press and hold Volume DOWN & UP
- plug your device to your PC/Laptop
DrakenFX said:
and not having access to adb, you meant don't have a PC/Laptop?
Cuz there is an alternative way how to boot to " edl "
- turn your phone completely off
- press and hold Volume DOWN & UP
- plug your device to your PC/Laptop
Click to expand...
Click to collapse
so what i mean by i cannot access ADB is that the phone has stock recovery in which there is no ADB functionality, i cannot access the OS so i cannot use ADB that way either,
i tried the method above to go into edl mode but it just goes onto a black screen where the led light flashed red and green and the computer does not recognise anything being plugged in, not even the system sound,
I have the correct drivers installed as i used his before when the OS was working
shia786 said:
so what i mean by i cannot access ADB is that the phone has stock recovery in which there is no ADB functionality, i cannot access the OS so i cannot use ADB that way either,
i tried the method above to go into edl mode but it just goes onto a black screen where the led light flashed red and green and the computer does not recognise anything being plugged in, not even the system sound,
I have the correct drivers installed as i used his before when the OS was working
Click to expand...
Click to collapse
Hi,
I have the exact same issue
Did you find a way to get your phone booting again ?
DrakenFX said:
and not having access to adb, you meant don't have a PC/Laptop?
Cuz there is an alternative way how to boot to " edl "
- turn your phone completely off
- press and hold Volume DOWN & UP
- plug your device to your PC/Laptop
Click to expand...
Click to collapse
That doesn't work on the A2017G, you have to use "adb reboot edl", so you see the problem. Also, the A2017G doesn't actually have an EDL mode but something very similar that's ZTE call Handset diagnostic Interface - quite why, who knows, this is ZTE after all...
Changing thread to become updates on trying to 7.0 to work on L29
IGNORE:Has anyone tested the leaked Android N on an L29. It was confirmed that dload is not working. Has anyone tried fastboot
UPDATE:Tried flashing Boot Cust System and Recovery images from the new update.app. It flashed successfully with no errors. However, the device is currently stuck on "Device is booting"
Any Suggestions?
UPDATE 2:Went ahead and flashed the boot recovery and cust images from the update.app from L29C636B320 and i went through the device is booting screen. Currently on a black screen without a boot animation, waiting for something to happen. Tried a factory reset through the recovery and it failed. I'll let you know if it boots up
UPDATE 3: Noticed HiSuite being recognized, not sure how long its been there. Its been 15 minutes on black screen losing hope
UPDATE 4: Flashed back to B320 for now, @nakul has instructions to getting Nougat. Please refer to those. As of now I did not try it, I will when I have the time. Basically it's using dload after rebranding L29 as AL 10
UnchartedRd said:
Has anyone tested the leaked Android N on an L29. It was confirmed that dload is not working. Has anyone tried fastboot
Click to expand...
Click to collapse
Dload not working on my NXT-L29 bootloader Locked
Not tested by Bootloader
streetbike55 said:
Dload not working on my NXT-L29 bootloader Locked
Not tested by Bootloader
Click to expand...
Click to collapse
OK I'll try it with fastboot, as mine is unlocked. I guess I'll take the risk, however I believe that it should work.
UnchartedRd said:
OK I'll try it with fastboot, as mine is unlocked. I guess I'll take the risk, however I believe that it should work.
Click to expand...
Click to collapse
Ok, but if I understand it will pass the phone in AL-10. Because this leak is for AL-10
streetbike55 said:
Ok, but if I understand it will pass the phone in AL-10. Because this leak is for AL-10
Click to expand...
Click to collapse
Yeah, but the hardware is identical to the AL10.
UnchartedRd said:
Yeah, but the hardware is identical to the AL10.
Click to expand...
Click to collapse
Be carreful with related "Google play services" bug. Like contact synchronisation for example .
streetbike55 said:
Be carreful with related "Google play services" bug. Like contact synchronisation for example .
Click to expand...
Click to collapse
OK I'll keep that in mind. Thanks
UnchartedRd said:
OK I'll keep that in mind. Thanks
Click to expand...
Click to collapse
Good Luck !
we want the news ! :good:
streetbike55 said:
Good Luck !
we want the news ! :good:
Click to expand...
Click to collapse
I will let you know in a few hours or in the morning. It's late where I live
So how did it work out?
Skickat från min HUAWEI NXT-L29 via Tapatalk
Tried flashing Boot Cust System and Recovery images from the new update.app. It flashed successfully with no errors. However, the device is currently stuck on "Device is booting"
Any Suggestions?
Went ahead and flashed the boot recovery and cust images from the update.app from L29C636B320 and i went through the device is booting screen. Currently on a black screen without a boot animation, waiting for something to happen. Tried a factory reset through the recovery and it failed. I'll let you know if it boots up
UnchartedRd said:
Changing thread to become updates on trying to 7.0 to work on L29
IGNORE:Has anyone tested the leaked Android N on an L29. It was confirmed that dload is not working. Has anyone tried fastboot
UPDATE:Tried flashing Boot Cust System and Recovery images from the new update.app. It flashed successfully with no errors. However, the device is currently stuck on "Device is booting"
Any Suggestions?
UPDATE 2:Went ahead and flashed the boot recovery and cust images from the update.app from L29C636B320 and i went through the device is booting screen. Currently on a black screen without a boot animation, waiting for something to happen. Tried a factory reset through the recovery and it failed. I'll let you know if it boots up
Click to expand...
Click to collapse
UPDATE 3: Noticed HiSuite being recognized, not sure how long its been there. Its been 15 minutes on black screen losing hope
Bad news :crying:
Originally Posted by UnchartedRd
Changing thread to become updates on trying to 7.0 to work on L29
IGNORE:Has anyone tested the leaked Android N on an L29. It was confirmed that dload is not working. Has anyone tried fastboot
UPDATE:Tried flashing Boot Cust System and Recovery images from the new update.app. It flashed successfully with no errors. However, the device is currently stuck on "Device is booting"
Any Suggestions?
UPDATE 2:Went ahead and flashed the boot recovery and cust images from the update.app from L29C636B320 and i went through the device is booting screen. Currently on a black screen without a boot animation, waiting for something to happen. Tried a factory reset through the recovery and it failed. I'll let you know if it boots up
UPDATE 3: Noticed HiSuite being recognized, not sure how long its been there. Its been 15 minutes on black screen losing hope
Click to expand...
Click to collapse
do you try with dload via sd card L29C636320
UnchartedRd said:
UPDATE 3: Noticed HiSuite being recognized, not sure how long its been there. Its been 15 minutes on black screen losing hope
Click to expand...
Click to collapse
You doesn't flash Cache.img and userdata.img ?
streetbike55 said:
You doesn't flash Cache.img and userdata.img ?
Click to expand...
Click to collapse
I had the same issue on Saturday. Flash the recovery from the Android N zip file. Then downgraded to B172 using the dload method. Upgraded again to B320 and stopped there. Try it... Good Luck
This Tips only for L29C636xxx for upgrade to nouget 7 beta for L10 cn chinese only
uses Srk tool
1 root and unlock bootloader
2 use srktool Menu 7 utility /9:Changing oeminfo and custom.bin after that phone will reboot and reset factory
i have problem with phone show unlock in ADB but can not flash stock recovery via srk tool unlock once again
3 phone must open usb debug use srk tool flash stock recovery choose you have rom 4.0or 4.1
4 now phone on deban with L10 with usb debug make dload folder only sd card which copy file nouget update.app
5 at phone call *#*#2446578#*#* at 4: software upgrade phone will reboot to update with dload wait
6 until restart again ****f volum up with power go to menu reformat factory
end
now phone must on nouget 7
good thing this rom fast smooth and save bat can login huawei id install app
bad thing sim slot 1 lock only for cn chinese mobile only sim slot 2 only 2g internet
phone show lock ADB error can not flash anything
i can rool back by dload again with rom 4.1 AL 10 only
after unlock bootloader and root deban Changing oeminfo and custom.bin to L29C636320
laster dload with rom L29C636320
now phone with lock rom L29
someone wants to testing this rom nouget 7 ?
@nakul Are you sure turned on OEM unlock in developer options
nakul said:
do you try with dload via sd card L29C636320
Click to expand...
Click to collapse
Dload is not working with L29 but as @nakul said rebranding your phone seems to work. He also mentioned that International Sims are only receiving 2g internet
hey
i flashed emui 5 on my VNS-L21
i did a mistake though
i flashed VNS-L31 firmware on my VNS-L21
now the phone model is changed to generic-a15
now i cant flash any roms using dload to this device..
i flashed twrp using fastboot but i cant boot into twrp....the bootloader unlocked screen says 'phone is booting" forever when i try to get into twrp
what do i do
please help
the rom is working fine on my VNS-L21 except for the camera...i need it a lot
please help me
edit:1
i tried to revert back to mm
it still says firmware incompatible
now my bootloader got locked...in the boot i got a msg that data partition is damaged and i need to format it....so i formatted it
now my phone is only booting to erecovery and bootloader
i cant flash twrp or revolution recovery because the bootloader is locked
i cant unlock bootloader now because i cant boot up my phone
Guys help us about the camera. I am in the same exact situation. @BadWolfYe and your product_V3 doesnt fix the camera for me, VNS-L21.
And for the recovery - http://forum.xda-developers.com/hua...ecovery-twrp-3-0-2-android-nougat-03-t3511937 - use adb flash it.
dancress said:
You'll have to go the hard route. You'll find all the required files in the ROM section.
Download any Nougat.zip (329 worked for me, 336 did not). Unzip. You'll get the update.app.
Download the second file with all the missing apps. Do not unzip. Maybe rename to something shorter like data.zip.
Download Revolution Recovery for Nougat. Unzip. You get the recovery.img. RENAME to something like revolution.img.
Open update.app in Huawei Update Extracor. Extract recovery.img, boot.img and system.img to wherever your fastboot.exe is. It's practical to put it all in one directory so you don't have to type long paths.
Now, careful...
Go into Fastboot. If Vol- + Power doesn't work, let it boot into eRecovery, press Vol- and tap Reboot. There you are.
Open a command window in the dir with fastboot.exe and the .img files (right click, Open Command Window)
fastboot flash boot boot.img
.... OK
fastboot flash system system.img
.... sparse 1/5 or something, this takes a bit of time.
fastboot flash revolution.img
.... OK
Now DO NOT REBOOT into System. Hold Vol+ + Power while still in Fastboot. It'll boot into Revolution eventually. Tap Advanced, ADB Sideload. Swipe.
Back in your command window, type:
adb sideload second_file.zip
... working... this'll take a bit. There might be an error message like 'could not mount /data'. Doesn't matter at this point.
When done, type
fastboot flash recovery recovery.img (this is the stock recovery you extracted from update.app)
... OK
Reboot to recovery from Revolution.
Do factory reset. Note: If you don't do this last step, there will be a bootloop.
Reboot. The system should now boot up normally. At least it did for me... good luck.
Click to expand...
Click to collapse
But maybe you installes twrp for mm
Laurisss said:
Guys help us about the camera. I am in the same exact situation. @BadWolfYe and your product_V3 doesnt fix the camera for me, VNS-L21.
And for the recovery - http://forum.xda-developers.com/hua...ecovery-twrp-3-0-2-android-nougat-03-t3511937 - use adb flash it.
Click to expand...
Click to collapse
I did this too. Only way to fix it is to downgrade to MM (instructions are in the N install thread). I then unlocked the bootloader, booted to fastboot, flashed Meticulus recovery. Once you're here, the important thing is to flash the update.zip and appropriate .Zip file for your device. Took me a while to find it but Meticulus has a post in Spanish with all of them for each type of P9 lite - there's one for the VNS-L23 there. Flash the update.zip and then device zip (in that order) and reboot. It'll work.
This phone is harder to flash Roms than others I've had in the past... It's important to do things in the right order.
Here's the link I was referring to: http://www.htcmania.com/showthread.php?t=1265029
ALAN JO K said:
hey
i flashed emui 5 on my VNS-L21
i did a mistake though
i flashed VNS-L31 firmware on my VNS-L21
now the phone model is changed to generic-a15
now i cant flash any roms using dload to this device..
i flashed twrp using fastboot but i cant boot into twrp....the bootloader unlocked screen says 'phone is booting" forever when i try to get into twrp
what do i do
please help
the rom is working fine on my VNS-L21 except for the camera...i need it a lot
please help me
Click to expand...
Click to collapse
Like me today.. I´ve installed Emui 5 on my VNS-L21, but after installation bootloader seems to be locked and TWRP won´t load.. What can I do now? I´ve tried flash some recovery, or MM but with locked bootloader it´s hard Is here somebody who know how to repair it ??
DiXiDeR said:
Like me today.. I´ve installed Emui 5 on my VNS-L21, but after installation bootloader seems to be locked and TWRP won´t load.. What can I do now? I´ve tried flash some recovery, or MM but with locked bootloader it´s hard Is here somebody who know how to repair it ??
Click to expand...
Click to collapse
First thing when you want to do something (TWRP, root, custom ROM etc.) with your phone is: UNLOCK BOOTLOADER!
Without unlocked bootloader is not hard to do, you not even try, because it is impossible...
gtdaniel said:
First thing when you want to do something (TWRP, root, custom ROM etc.) with your phone is: UNLOCK BOOTLOADER!
Without unlocked bootloader is not hard to do, you not even try, because it is impossible...
Click to expand...
Click to collapse
You didn't understand me.. I've unlocked it. Installed TWRP, EMUI 5 and after reboot unlocked bootloader gone.. How is this possible ?
DiXiDeR said:
You didn't understand me.. I've unlocked it. Installed TWRP, EMUI 5 and after reboot unlocked bootloader gone.. How is this possible ?
Click to expand...
Click to collapse
Simply! At any install of stock firmware you loose: unlocked bootloader, twrp and root.
gtdaniel said:
Simply! At any install of stock firmware you loose: unlocked bootloader, twrp and root.
Click to expand...
Click to collapse
Oh okey. So.. Maybe this will be retarded question, but how can I unlock bootloader now, when my phone model is generic_a15? When I'm trying to put it on Huawei website it is wrong..
DiXiDeR said:
Oh okey. So.. Maybe this will be retarded question, but how can I unlock bootloader now, when my phone model is generic_a15? When I'm trying to put it on Huawei website it is wrong..
Click to expand...
Click to collapse
With same procedure that you unlocked before.
You must have the unlock code.
gtdaniel said:
With same procedure that you unlocked before.
You must have the unlock code.
Click to expand...
Click to collapse
Okey, second retarded question.. I didn't save my first code.. is here some way to reach it again ? Or can I somehow use generic_a15 phone model?
If you do not have the initial unlock code you have a big problem...
gtdaniel said:
If you do not have the initial unlock code you are a big problem...
Click to expand...
Click to collapse
Oh god, I'm so retarded, but thank you for your patience
Now, when you dial code for Device ID you will get a differend ID and when you make procedure for another unlock code on Huawei site you get ERROR...
gtdaniel said:
Now, when you dial code for Device ID you will get a differend ID and when you make procedure for another unlock code on Huawei site you get ERROR...
Click to expand...
Click to collapse
Yes..
diorenzo said:
But maybe you installes twrp for mm
Click to expand...
Click to collapse
i tried to revert back to mm
it still says firmware incompatible
now my bootloader got locked...in the boot i got a msg that data partition is damaged and i need to format it....so i formatted it
now my phone is only booting to erecovery and bootloader
i cant flash twrp or revolution recovery because the bootloader is locked
i cant unlock bootloader now because i cant boot up my phone
ALAN JO K said:
i tried to revert back to mm
it still says firmware incompatible
now my bootloader got locked...in the boot i got a msg that data partition is damaged and i need to format it....so i formatted it
now my phone is only booting to erecovery and bootloader
i cant flash twrp or revolution recovery because the bootloader is locked
i cant unlock bootloader now because i cant boot up my phone
Click to expand...
Click to collapse
For unlock bootloader you only need you phone to boot into bootloader...
You say "now my phone is only booting to erecovery and bootloader"
So?
gtdaniel said:
For unlock bootloader you only need you phone to boot into bootloader...
You say "now my phone is only booting to erecovery and bootloader"
So?
Click to expand...
Click to collapse
how do i get the ids required for unlocking bootloader if i cant look it up in settings
ALAN JO K said:
how do i get the ids required for unlocking bootloader if i cant look it up in settings
Click to expand...
Click to collapse
You have to saved anywhere first time you have'it!
That is the first rule!
Once you debranded your phone that Device ID is change,
so even your phone boot ok and you obtain a Device ID is not the same
with the one saved in the Huawei databases...
So, procedure to obtain the bootloader unlock code is ended in error...
Okay, so :- :crying::crying::crying::crying:
I was on nougat and went to downgrade and followed ALL instruction apart from one - which was something I missed with translate until i visited the htc page for the tenth time trying to fix this.
:silly: :crying: ----- I didnt change default location whilst running nougat -----:silly: :crying:
I flashed the c432 oem file, and I have tried to update to b151, b150 and b161 all through the update.app method. to no avail.
I have tried flashing everything manually through adb pushing AND fastboot after using the extractor and everything works EXCEPT the system.img. I am faced with an error telling me it has failed, 'unable to mount /system' - - - This message comes through regardless of what I do and im panicking
PLEASE HELP I AM SO STUCK
thank you in advance for any suppport
What P9 lite you have?
Johnny TDN said:
What P9 lite you have?
Click to expand...
Click to collapse
I have the vns-L31 however ive just opened dc unlocker and its showing my model as 21
i can access fastboot and rescue mode as well as twrp although when flashing im faced with the /system error
It is written, on htcmania, using c432oeminfo and b130.
so,
Code bootloader
Twrp meticulus.
Install c432oeminfo.zip, power off
Restart dload c432b130.
Chisetdel31260 said:
It is written, on htcmania, using c432oeminfo and b130.
so,
Code bootloader
Twrp meticulus.
Install c432oeminfo.zip, power off
Restart dload c432b130.
Click to expand...
Click to collapse
i will try that, although ill get errors when flashing the zip - not only that but I cant get to meticulus once its flashed - possibly the system error?
Restart, bootloader code,
Twrp Meticulous, went a wipe, xxxx everything except external storage, installs c432oeminfo.zip, dload c432b130.
http://www.htcmania.com/showthread.php?t=1265458
Chisetdel31260 said:
Restart, bootloader code,
Twrp Meticulous, went a wipe, xxxx everything except external storage, installs c432oeminfo.zip, dload c432b130.
http://www.htcmania.com/showthread.php?t=1265458
Click to expand...
Click to collapse
what do you mean when you say code bootloader? what should i do there? anything im missing?
raihanbam said:
what do you mean when you say code bootloader? what should i do there? anything im missing?
Click to expand...
Click to collapse
Yes, I noticed that from time to time, in bootloader mode, it is written unlocked, but as the device bootloop (bug) I believe it too. so
I retype systematically the bootloader code to open.
raihanbam said:
what do you mean when you say code bootloader? what should i do there? anything im missing?
Click to expand...
Click to collapse
If you have your bootloader unlocked (if you don,t have it, unlock it) and flash TWRP. After that, flash B130 for your VNS-L31. Done.
Unlock yor Bootloader again. And try flashing again.
Have hade the same problem. My bootloader showed unlocked, but he was not.
Ron
raihanbam said:
what do you mean when you say code bootloader? what should i do there? anything im missing?
Click to expand...
Click to collapse
i have followed all of these and notw its stuck on your device is booting.....
i flashed the rom with recovery so now ill try the dload method again, i assume ill have to flash the second zip with recovery?
Chisetdel31260 said:
Restart, bootloader code,
Twrp Meticulous, went a wipe, xxxx everything except external storage, installs c432oeminfo.zip, dload c432b130.
http://www.htcmania.com/showthread.php?t=1265458
Click to expand...
Click to collapse
i am now stuck with your device is booting - cant access fastboot or recovery at all - doesnt show up in adb or fastboot either
raihanbam said:
i am now stuck with your device is booting - cant access fastboot or recovery at all - doesnt show up in adb or fastboot either
Click to expand...
Click to collapse
Shut down your device. Press the switch off for 10 secounds.
When the phone is off, swith on and same time with vol + without usb-kabel, and otherwise try it with usb-kabel.
When you stock recovery starts. You can try a factoryreset.
When you Revolution recovery starts flash oem.info again and perform the dload methode with your right MM UPDATE.APP.
Ron
RonPo said:
Shut down your device. Press the switch off for 10 secounds.
When the phone is off, swith on and same time with vol + without usb-kabel, and otherwise try it with usb-kabel.
When you stock recovery starts. You can try a factoryreset.
When you Revolution recovery starts flash oem.info again and perform the dload methode with your right MM UPDATE.APP.
Ron
Click to expand...
Click to collapse
no matter what I do I'm stuck with the device is booting screen I even let the battery drain to try that way-I'm so screwed
RonPo said:
Shut down your device. Press the switch off for 10 secounds.
When the phone is off, swith on and same time with vol + without usb-kabel, and otherwise try it with usb-kabel.
When you stock recovery starts. You can try a factoryreset.
When you Revolution recovery starts flash oem.info again and perform the dload methode with your right MM UPDATE.APP.
Ron
Click to expand...
Click to collapse
no matter what I do I'm stuck with the device is booting screen I even let the battery drain to try that way-I'm so screwed
RonPo said:
Shut down your device. Press the switch off for 10 secounds.
When the phone is off, swith on and same time with vol + without usb-kabel, and otherwise try it with usb-kabel.
When you stock recovery starts. You can try a factoryreset.
When you Revolution recovery starts flash oem.info again and perform the dload methode with your right MM UPDATE.APP.
Ron
Click to expand...
Click to collapse
okay so I got to the erecovery screen, it only gives the option to dl the latest version and fails along with reboot and shutdown - no wipe
raihanbam said:
okay so I got to the erecovery screen, it only gives the option to dl the latest version and fails along with reboot and shutdown - no wipe
Click to expand...
Click to collapse
OK. Go to bootloader and flash:
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash system system.img
extract this files with: Huawei Update Extractor from your Original UPDATE.APP
system.img is loading in steps and need much time.
Ron
Hi guys, i have the same problem after doing some ****, flashed stock rom from lineageos 14 and a lot of things that i'm trying now to unbrick my phone... i cant enter to the erecovery with the 3 buttons method, wathever i do, and i dont have any idea on how to unbrick my phone... I hope someone could help me
Hi guys
I flashed a twrp recovery on my a2017U witout unlocking bootloader but i can not access it now (i can not reach recovery) it seems my device annoy me to access it...
I also checked all related posts like this...
[EDL][A2017/A2017U] Emergency DL Mode TWRP + Unlock + Upgrade By jcadduono:
https://forum.xda-developers.com/axo...nlock-t3553514
And tried to unlock my bootloader But not worked for me
Is there any way i can return to stock recovery or twrp recovery...?
My phone is working now but i can not reach recovery any way...
Help me please...
Flash stock recovery the same way you flashed twrp?
lafester said:
Flash stock recovery the same way you flashed twrp?
Click to expand...
Click to collapse
I flashed the twrp with miflash tool...
Can i flash stock recovery at same way?
And i dont have the stock recovery and that is i need it...
At this point it's probably easier to unlock and use twrp.
lafester said:
At this point it's probably easier to
unlock and use twrp.
Click to expand...
Click to collapse
I used miflash to install twrp but can not load recory(when i try to boot recovery, with combo power+volume up key, the screen becomes black and the notification led came red. Untill i reboot the phone)
And i tested to unlock bootloader but failed...
Is there another way to flash it?
If you want stock recovery flash with tenfar tool or fastboot.
mortkarg5 said:
I used miflash to install twrp but can not load recory(when i try to boot recovery, with combo power+volume up key, the screen becomes black and the notification led came red. Untill i reboot the phone)
And i tested to unlock bootloader but failed...
Is there another way to flash it?
Click to expand...
Click to collapse
The link you posted works quite well actually. What i found is that you need to unzip all the files you wish to flash onto the desktop. How did you attempt to unlock the bootloader?
Shotgun4 said:
The link you posted works quite well actually. What i found is that you need to unzip all the files you wish to flash onto the desktop. How did you attempt to unlock the bootloader?
Click to expand...
Click to collapse
I unziped all of them in seperated folders
The miflash shows me success message
I attemped to unlock it with cmd
But i need boot into recovery to unlock it...
And i can not do it...
No, boot into fastboot to unlock.
lafester said:
No, boot into fastboot to unlock.
Click to expand...
Click to collapse
How i can do it?
My phone was working since today
I tried to reset factory but now i lost every thing
My A2017U no longer working and when attemped to turn it on , the led flashed red two seconds and zte logo
Then just a black screen
How i can restore it?
Well, I would use miflash full b15 package.
lafester said:
Well, I would use miflash full b15 package.
Click to expand...
Click to collapse
Same here. Just jump back into EDL mode and flash the full OTA. Download and unzip the folder to your desktop. I removed the META-INF File and flashed after the A2017U_** folder as the META caused me to fail a few times.