Hello,
Ineed help on installing stock firmware too for samsung s7 SM-G930A AT&T mobile.
https://drive.google.com/drive/folders/0Bz4qV62uoY6aQXpfZWpRV0MxUkE
These are errors videos. I'm stuck here with this issue
I rooted my phone, ran the S7 fixes script, the debloat script, then the root seemed to work fine for a day. Then the wireless charging stopped working, then it unplugged and replugged itself over and over and over in the charging mode, like it "recognizes" the charging cable over and over all day long while it's plugged into the charger, making the "beep beep" sound that it makes when you plug in the charger. So I rebooted the phone to see if it would fix it, and now it hangs at the at&t logo screen forever. I can't power it down. I can get into odin mode, but odin fails every time I try to reinstall the factory ROM. I tried to clear the cache, but it didn't work. I tried booting into recovery mode, but it fails. basically I've tried just about everything to unbrick and it's still bricked.
also note that I used odin 3.12.3, the lastest. and I tried to install G930AATT1APB5_User_Binary, which fails every time.
also tried smartswitch, but the program just shuts off instantly after entering the SN in the device initialization in the emergency software and device initialization tab.
I enter the SN and hit okay and then it just shuts down the program, it just disappears.
ERROR LOG!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> lksecapp.mbn
<ID:0/003> xbl.elf
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
try using odin prince comesy, and make sure your using the latest firmware PI2. Try installing the PI2 firmware with odin 3.12.3. should work.
rzenks said:
Hello,
Ineed help on installing stock firmware too for samsung s7 SM-G930A AT&T mobile.
https://drive.google.com/drive/folders/0Bz4qV62uoY6aQXpfZWpRV0MxUkE
These are errors videos. I'm stuck here with this issue
I rooted my phone, ran the S7 fixes script, the debloat script, then the root seemed to work fine for a day. Then the wireless charging stopped working, then it unplugged and replugged itself over and over and over in the charging mode, like it "recognizes" the charging cable over and over all day long while it's plugged into the charger, making the "beep beep" sound that it makes when you plug in the charger. So I rebooted the phone to see if it would fix it, and now it hangs at the at&t logo screen forever. I can't power it down. I can get into odin mode, but odin fails every time I try to reinstall the factory ROM. I tried to clear the cache, but it didn't work. I tried booting into recovery mode, but it fails. basically I've tried just about everything to unbrick and it's still bricked.
also note that I used odin 3.12.3, the lastest. and I tried to install G930AATT1APB5_User_Binary, which fails every time.
also tried smartswitch, but the program just shuts off instantly after entering the SN in the device initialization in the emergency software and device initialization tab.
I enter the SN and hit okay and then it just shuts down the program, it just disappears.
ERROR LOG!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> lksecapp.mbn
<ID:0/003> xbl.elf
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
rzenks, I just had literally the exact same problem as you for the past day. I tried so many firmwares and the Smart Switch recovery option, but had the same problems as you did. I thought I was going to be killed by my dad, as my phone was only 6 days old. But after a lot of specific search results, I found a firmware that worked for my phone.
You can find the firmware here: http://forum.xda-developers.com/att...4api3-firmware-download-t3481159#post69147585
Also be sure to use the Odin3 v3.12 Prince Comsy, found here: http://forum.xda-developers.com/android/software/odin-3-12-3-worlds-att-s7-odin-firmware-t3401470
Let me know if it works for you.
Why are you flashing such old firmware?? PB5 is SEVERAL updates back. I've uploaded the latest FW, try it. That's probably why it's failing.
when it says fused while in DL mode it means you are trying to flash a firmware thats older than the current firmware.
Related
Hello, I have tried updating my N9005 to the latest firmware 5.0 provided on Sammobile. After attempting to flash it via ODIN, the following error occurs:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Retried this step several times, but i have received the same error.
Following a few instructions found on the XDA forums, I tried using PIT file in order to re-partition.
The phone now reboots but will not go past the first boot screen "Samsung Galaxy Note3 N9005".
I tried pulling out the battery and performing a factory reset (along with wiping caches), but the situation is still the same after rebooting the device.
Also I have noticed that upon accessing "recovery mode", a error stating " Failed to mount /system (Invalid argument)" error is displayed.
I'm pretty new at upgrading phones and I've bought this phone recently and was unaware of the consequences of flashing ROMS via Odin.
The initial fw. on the device was 4.4.2 Official Samsung. Is there any way that I can make the phone reboot normally with fw. 4.4.2? Or any other firmware for that matter?
Thanks in advance.
AndreiRonaldo said:
Thanks in advance.
Click to expand...
Click to collapse
Reflash the firmware again now via ODIN without the .pit file.
Joku1981 said:
Reflash the firmware again now via ODIN without the .pit file.
Click to expand...
Click to collapse
I've tried that several times without success. But the issue was fixed. Apparently the PIT file I was using did not match the ROM i was flashing. I just had to find a matching pair of both ROM and PIT and now I've successfully booted my device. Hope that this thread might help others in need for answers to similar questions.
Alright, this is taking alot more than i had expected, after finally managing to boot my device, I've noticed that flashed rom behaves awfully, my phone is stuttering, and i have no sound. Also, my IMEI is displayed as "Unknown" in the "Status'" section of the device's Settings. Any suggestion on how to fix this issue?
flash the stock the rom you have before
As the title says, I tried to downgrade from lollipop 5.0 to 4.2 because I've had several issues and I also wanted to get root. I think part of my mistake was I wiped data/factory reset before I flashed AP. Any help would be much appreciated, as I have been at this for the past five hours. I added some info below that might help below. Thanks
- I cannot boot into recovery and get the message (Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again)
- CP is the only thing that will flash and CSC also fails
- model number is g900a AT&T
- I have used Odin 3.10.7 and 3.09, but no luck
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> persist.img.ext4
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Did you try to repair him via kies?Maybe would help.
Sent from my D6503 using Tapatalk
Hey I have also experienced the same thing before, I was panicking that time, so I fixed it by flashing the old zip file, if that does not work try following the instructions your phone gave eg. Go to kies
VoltexYT said:
Hey I have also experienced the same thing before, I was panicking that time, so I fixed it by flashing the old zip file, if that does not work try following the instructions your phone gave eg. Go to kies
Click to expand...
Click to collapse
Kies and kies3 are both not recognizing my device. I heard it could be because of usb debugging, but I can't boot into my phone to check.
Allek84 said:
Did you try to repair him via kies?Maybe would help.
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
Both kies and kies3 are not recognizing my device.
Hello I recently rooted my phone on 5.1.1 (Lollipop) and everything went well no issues till last night when I tried to install xposed installer and ended up soft bricking (I think) my phone, where it will turn on to the samsung s6 edge + logo and just sit there and won't go any further. I found out how to flash to the original firmware using Odin 3.10.7 and with the stock firmware file.
now I put my phone into download mode and connect it to Odin, put the firmware file into the AP section and hit start.
Once I hit start I get a fail message and this :
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried different firmwares from different sites, different odin verions, USB ports please help
I tried uploading pictures and links to the firmware I used but apparently I need 10 posts before that so if you want to know anything else in order to help please ask.
am non rooted trying to flash a different firmware and I get the same. I remove the OEM lock but cannot flash anything
odin 3.10.7 works
You write SM-G925W8 that´s S6 Edge, not S6 Edge+!!! Try firmware for SM-G928W8!
Hello i have a problem with flashing anything with odin on my Samsung Galaxy S4 9505.
Whenever i try flashing ROM or recovery or whatever, it says this:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Also when i try to boot my phone normally or go to the recovery it says this:
"Firmware upgrade encountered an issue.Please select recovery mode in Kies & try again."
I've downloaded Kies and tried to recover it but it says:
'GT-I9505' does not support initializing.
What i've tried so far:
flashing pit file with and without the rom.Tried multiple odin versions.Tried multiple rom versions.Tried flashing recovery CWM and TWRP.
Also the error i got "Firmware upgrade encountered an issue.Please select recovery mode in Kies & try again." was after i tried flashing official rom 4.4.2 downloaded form Sammobile(first i installed TWRP recovery wiped system data dalvic cache and booted in download mode ). I was previously using latest Android 5.0.1 official.
Is there any hope of unbricking my device?
Have you tried reinstalling your ADB driver?
Honestly, kies sucks. You don't need kies to have ADB driver installed. There is a package that install samsung drivers seperately.
Once you upgraded to a lollipop bootloader you can't just simply go back to a kitkat one. Samsung doesn't allow that.
Try using the back USB ports on your PC. Trust me, it can do wonders.
You could also try Heimdall.
well i think i've advanced abit now i get this:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> persdata.img.ext4
<ID:0/003> system.img.ext4
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed.
tried to reinstall the ADB driver and using the back ports.
Also is there any way to flash Official Samsung ROM true a custom recovery?Cuz i just managet to install TWRP recovery on it.
hollydamn i just tried flashing true odin Android 5.0.1 and it worked.But the wifi isn't working it just not letting me turn it on.
Why don't people understand when I say YOU CANNOT DOWNGRADE ?
i didn't downgrade it now i've installed 5.0.1.
simeon112 said:
i didn't downgrade it now i've installed 5.0.1.
Click to expand...
Click to collapse
Yes, but you tried to, even after I explicitly said you can't.
Your WiFi issues might be related to modem/kernel.
You could try flashing a different firmware.
I tied a differed one the wifi works now.Only when i turn on the mobile data and try to go to a random site it says Forbidden.I think i need to wait my carrier to send me the setting for the net...
Anyway THANK YOU very much!! <3
I have an i337m (North American version of s4) and you can downgrade from stock 5.01 to stock 4.4.2. I did this on 3 phones in order to use regionlockaway to sim unlock all three phones. Everything worked, including data and wifi.
I'd like to try a downgrade with a i9505 for curiosity sake but that particular model is not sold by carriers in Canada.
Answer, apparently I was using v4 bootloader, thought I was on most recent, but I wasn't. Had a hard time finding newer/current firmwares for my device, but was able to find v5, flashed and went perfectly
So I'm trying to reset my phone as a bad rom flash caused some sort of issue and couldn't get back into twrp "official binaries only"
Find latest firmware for my csc (which was july) doesnt work, I thought it might have been a BL issue as I had the august patch through a custom rom, found a different csc which was from august, and I get the same error
I also no longer get the official binaries only, just a bootloop of "An error has occurred while updating....use emergency recovery function in smart switch" which I also tried, no luck, but I can still get into download mode
Using most recent odin, official cable, updated usb firmware and such and am running as admin. Have tried different ports too, but it always fails at same step
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 5716 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Phone also says SW REV CHECK FAIL (Bootloader) Device 5, Binary: 4 after failed ODIN install
Any Ideas? Thanks