[Q] Help me please - T-Mobile Samsung Galaxy S7 Edge Questions & Answer

I just rooted my s7 edge W/ this download https://www.youtube.com/watch?v=KawiIZ4bAV8 & my hone is broken @ the moment I need UR help please & thanx (the only screens I see R the samsung, t- mobile bootup & the redownload screens), so I went on 2 xda developers & youtube last nite & I think discovered their called custom binaries, but that's as far as I can get on my own, I need UR help 2 get the rest of the way & use my device 2 its full potential!!! So thanx & talk 2 some1 soon........ PS I'm on a different pc, so do I have 2 download the same software 2 do this??

Brandon Thron said:
I just rooted my s7 edge W/ this download
& my hone is broken @ the moment I need UR help please & thanx (the only screens I see R the samsung, t- mobile bootup & the redownload screens), so I went on 2 xda developers & youtube last nite & I think discovered their called custom binaries, but that's as far as I can get on my own, I need UR help 2 get the rest of the way & use my device 2 its full potential!!! So thanx & talk 2 some1 soon........ PS I'm on a different pc, so do I have 2 download the same software 2 do this??
Click to expand...
Click to collapse
Odin back to your original firmware , Imo root isn't worth doing since the engineering kernel kills your battery life, but that's my 2 cents

Have you tried booting into recovery? If not, you'll need to do that and wipe cache then wipe data. That should get your phone booting up normally. And I also agree with boricuaguerrero. Root isn't worth it right now. Try flashing the latest G935U firmware. IMO, It's much better than TMO.

http://forum.xda-developers.com/tmobile-s7-edge/help/root-help-asap-tmo-s7-edge-t3489115/page1

Related

HELP!!

hey all i got my samsung galaxy 3 one month back and around 2 days back i just switched on my cell and it just stopped at samsung screen and didnt load so i showed it to the samsung customer care ,they fixed it .now its happening again!!
i dont know what to do!!
i have no idea about flashing or rooting or bricking or whatever
plz help me out!
got this cell from my pocket money!!
Check your battery, but it shouldn't be issue if phone actually starts. I recommended you to read about flashing and install new soft. Maybe you just overused it.
Sent from my overclocked GT-I5800 with Kyrillos' 6.0
ujjwalgulecha said:
hey all i got my samsung galaxy 3 one month back and around 2 days back i just switched on my cell and it just stopped at samsung screen and didnt load so i showed it to the samsung customer care ,they fixed it .now its happening again!!
i dont know what to do!!
i have no idea about flashing or rooting or bricking or whatever
plz help me out!
got this cell from my pocket money!!
Click to expand...
Click to collapse
Relax bro, its all right as of now. Try the following then we will see what to do
1. Try to do a factory reset.
2. Try to remove SD Card and then use phone for few hours without it.
3. If Any of the above solves your issue, then post here, else I would strongly suggest you to Flash a Stock ROM. You can contact me if you don,t know how.
Since you are from bangalore, so I am assuming you have a I5801 with Android 2.1 installed by default. Also post if you updated the firmware using KIES?
For the time being, cheer up as our Galaxy 3 is not frail
umangsagar said:
Relax bro, its all right as of now. Try the following then we will see what to do
1. Try to do a factory reset.
2. Try to remove SD Card and then use phone for few hours without it.
3. If Any of the above solves your issue, then post here, else I would strongly suggest you to Flash a Stock ROM. You can contact me if you don,t know how.
Since you are from bangalore, so I am assuming you have a I5801 with Android 2.1 installed by default. Also post if you updated the firmware using KIES?
For the time being, cheer up as our Galaxy 3 is not frail
Click to expand...
Click to collapse
hi
dont do any flashing or rooting if u have warranty on the phone and u have not done any of the above just take it back to service and tell them the problem and they will fix it for ur thats all ur phone is just 3 months old they have do it
haree said:
hi
dont do any flashing or rooting if u have warranty on the phone and u have not done any of the above just take it back to service and tell them the problem and they will fix it for ur thats all ur phone is just 3 months old they have do it
Click to expand...
Click to collapse
Yes i will second haree....in warranty period, if you havent made changes to your ROM, you should get it back to service centre and ask them do a proper repair, you can also tell them its a persistent problem. My apologies for not mentioning this as the 1st step above. Thank you haree

[Q] Rooting changed Model No

Hi All,
I have bought Samsung Galaxy 3 5 months back... the model no is GT-I5801. I did rooting to upgrade from Android 2.1 to 2.2 but the model no got changed to GT-I5800. Now my phone is dead slow... battery also got drained soon.
I really frustrated by using this change.
Can you anyone please help on this how to rollback all these things.
Regards
Ragavendran
Hi...
Try flashing an Eclair rom with bootloader
ragavendrang said:
Hi All,
I have bought Samsung Galaxy 3 5 months back... the model no is GT-I5801. I did rooting to upgrade from Android 2.1 to 2.2 but the model no got changed to GT-I5800. Now my phone is dead slow... battery also got drained soon.
I really frustrated by using this change.
Can you anyone please help on this how to rollback all these things.
Regards
Ragavendran
Click to expand...
Click to collapse
Go to the link : http://forum.xda-developers.com/showthread.php?t=1063940 or http://forum.xda-developers.com/showthread.php?t=1125387
Scroll down to ASIAN ROMs...choose which one you want to flash...go ahead and it should get restored to I5801.....
ragavendrang said:
Hi All,
I have bought Samsung Galaxy 3 5 months back... the model no is GT-I5801. I did rooting to upgrade from Android 2.1 to 2.2 but the model no got changed to GT-I5800. Now my phone is dead slow... battery also got drained soon.
I really frustrated by using this change.
Can you anyone please help on this how to rollback all these things.
Regards
Ragavendran
Click to expand...
Click to collapse
flash attached as one package..
but before flashing bootloader i wld recommned to close all running programmes in bg & then open odin & flash..
ranadip.bswas said:
flash attached as one package..
but before flashing bootloader i wld recommned to close all running programmes in bg & then open odin & flash..
Click to expand...
Click to collapse
Hi
What do you mean?
Flash the same way as we flash roms?
Coz I would be in download mode, so how come can I have apps running?
Even I need i5801 during boot, as I dropped my cell in water, its working fine now but I can't hear during a call or play a song (I mean things are not audible & so I need to contact Samsung care center) so need either ddjp2 wid bootloader or the file you provided.
Thanks in advanced.
dabhirahul said:
Hi
What do you mean?
Flash the same way as we flash roms?
Coz I would be in download mode, so how come can I have apps running?
Even I need i5801 during boot, as I dropped my cell in water, its working fine now but I can't hear during a call or play a song (I mean things are not audible & so I need to contact Samsung care center) so need either ddjp2 wid bootloader or the file you provided.
Thanks in advanced.
Click to expand...
Click to collapse
^I guess what he meant was that close all the background applications on your PC/Laptop before initializing the process.
h4r5h said:
^I guess what he meant was that close all the background applications on your PC/Laptop before initializing the process.
Click to expand...
Click to collapse
Ya . Thnx h4r5h ..
Sent from my GT-I5800 using Tapatalk
DDJP2 on samfirmware is wid a bootloader.
Anyway thanks for that small file (boot.tar)
Can I flash only the wanted portions of a rom after removing the rest using 'total commander' always.

I Hardbricked my i9500 :(

Hello XDA,
So yesterday i installed the pac-man ROM 4.4.2 on my Galaxy S4 (i9500) and all was going well. Then i tried installing Unicon ( a utility which manages your icon packs). I have installed this app on every android phone i have ever had and every time it asks me to go into xposed and enable it like it usually does.
So i go into xposed and i click on install/update. It shows a dialog saying that (some file name i don't remember) is already there and continue if you are feeling adventurous. Being the stupid person I am i continued.
After switching off the device, the screen is absolutely black and does not even go to download mode or recovery mode.
Please help me I'm almost crying as the warranty just ran out and it wont get replaced or anything. I don't even have the money to buy a new phone right now.
Please tell me what to do to fix this i don't care about the data or anything i just want my phone to be fixed please help me..........:crying:
shivap1998 said:
Hello XDA,
So yesterday i installed the pac-man ROM 4.4.2 on my Galaxy S4 (i9500) and all was going well. Then i tried installing Unicon ( a utility which manages your icon packs). I have installed this app on every android phone i have ever had and every time it asks me to go into xposed and enable it like it usually does.
So i go into xposed and i click on install/update. It shows a dialog saying that (some file name i don't remember) is already there and continue if you are feeling adventurous. Being the stupid person I am i continued.
After switching off the device, the screen is absolutely black and does not even go to download mode or recovery mode.
Please help me I'm almost crying as the warranty just ran out and it wont get replaced or anything. I don't even have the money to buy a new phone right now.
Please tell me what to do to fix this i don't care about the data or anything i just want my phone to be fixed please help me..........:crying:
Click to expand...
Click to collapse
Not an expert but try to buy an USB JIG that force your phone into download mode. At that point, you can flash a recovery or a rom directly via odin. :good:
Well, it has nothing to do with Xposed. You can almost impossible brick it that way.
Did you try a simple thing like taking the battery out?
Yes I tried removing everything I could including battery Sim card SD card. Still not working. some people have said that in hard brick their devices give out red led but my phone doesn't even do that. Its just like a brick. Somebody pls help me ;( my dad doesn't let me use the credit card online and I can't find the USB jig anywhere near me so I can't get it.
Sent from my Nexus 7 using XDA Free mobile app
shivap1998 said:
Yes I tried removing everything I could including battery Sim card SD card. Still not working. some people have said that in hard brick their devices give out red led but my phone doesn't even do that. Its just like a brick. Somebody pls help me ;( my dad doesn't let me use the credit card online and I can't find the USB jig anywhere near me so I can't get it.
Sent from my Nexus 7 using XDA Free mobile app
Click to expand...
Click to collapse
Try asking here: http://forum.xda-developers.com/showthread.php?t=2265477
My phone is hard bricked where as that link is for soft bricked phones. Thank you anyways.....
Sent from my Nexus 7 using XDA Free mobile app
Your phone is not bricked. The way you descriped is almost impossible to brick it.
You got a faulty battery or a hardware failure.
Hi,
I and a friend had a similar issue to yours. Our S4 was very slow and we took out the battery, now it doesn't even show Samsung Splash Screen (same issue, different context). Unfortunately, JIG won't do the work there (I tried).
While my friend sent it to warranty I didn't have mine because it was bought in US and I'm from Brazil. It looks like a viable way of solving it is using a tool called JTAG, I'm waiting for a friend to bring to my town his JTAG to see if it works, I'll report here the results, I recommend you searching for it .
~Lord
"Time is too short to cry, long enough to try." - March of Time (Helloween)
Sent from my KitKat Nexus 10
Thank you but are you sure the jig won't work? As my case is different I think it might... Thanks anyway I will try looking for a JTAG......
Sent from my Nexus 7 using XDA Free mobile app
shivap1998 said:
Thank you but are you sure the jig won't work? As my case is different I think it might... Thanks anyway I will try looking for a JTAG......
Sent from my Nexus 7 using XDA Free mobile app
Click to expand...
Click to collapse
You sure you'll look for the JTAG device? The Jtag box cost around $210.
shivap1998 said:
Thank you but are you sure the jig won't work? As my case is different I think it might... Thanks anyway I will try looking for a JTAG......
Sent from my Nexus 7 using XDA Free mobile app
Click to expand...
Click to collapse
Hi,
JIG will only work
if you can get at least in Splash Screen, if it doesn't give any life signal, then I get that you can't get into Splash Screen, therefore, JIG won't do the work.
Here's a video showing exactly the same problem I had and a JTAG repair
Samsung Galaxy S4 - JTAG Brick Repair Service (De…: http://youtu.be/PkfEhu4trRY
Andy0625 said:
You sure you'll look for the JTAG device? The Jtag box cost around $210.
Click to expand...
Click to collapse
Hi,
There are people who can do the JTAG work, they charge some money but fix it. Even though it is way cheaper than getting a JTAG interface . Buying a device would be way more expensive, and I think it wouldn't be really worth, like you mentioned .
~Lord
"Time is too short to cry, long enough to try." - March of Time (Helloween)
Sent from my KitKat Nexus 10
Guys, I like the talk about JTAG, but I don't think it will do him any good.
His device is not bricked. Xposed only installs in /system/bin (if I am not mistaken). Thus it's impossible to brick it that way. It does nothing to the bootloader, download mode or any other partition.
He has clearly a faulty battery or an other hardware failure. He just had bad luck imo.
Are you sure about that? I'll try changing the battery.... But as I said I can't enter download mode or recovery ,both are symptoms of a hard brick....
And any idea where I can find a person with JTAG in Gurgaon(India)?
Sent from my Nexus 7 using XDA Free mobile app
shivap1998 said:
Are you sure about that? I'll try changing the battery.... But as I said I can't enter download mode or recovery ,both are symptoms of a hard brick....
And any idea where I can find a person with JTAG in Gurgaon(India)?
Sent from my Nexus 7 using XDA Free mobile app
Click to expand...
Click to collapse
Sounds like a dead battery. Get your battery charged using an external charger or using a friend's working S4.
If yur mobile is dead try this procedure link below, This procedure vil wrk on i9300, n7100,i9500 tested by me. no need to follow ful method create bootable memory card insert the card into yur mobile insert battery den connect usb jig wait for 10 to 15 min yur mob sud boot into download mode. aftr boot flash vit multi file firmware vit pit dnt flash kitkat. boz aftr deadboot repair yu hav to repair imei . 4.2.2 or 4.3.3 is better to repair .
http://forum.xda-developers.com/gal...n7100-dead-t2647558/post50305456#post50305456
Sorry but the IMEI fix is only for i9300 and I don't have all the required stuff for the procedure.
Sent from my Nexus 7 using XDA Free mobile app
with tis method yur mob vil turn on but for imei fix yu need software boxes . 1st need to repair efs den write original imei. better go to any nearest service center its easly fixable prob
Thank you all for your help guyz but now as you can see (signature) my phone is now fixed. I just went to a shop and got it fixed for Rs 900 ($15). Thank you all for your help .
Sent from my awesome GS4 (I9500)
shivap1998 said:
Thank you all for your help guyz but now as you can see (signature) my phone is now fixed. I just went to a shop and got it fixed for Rs 900 ($15). Thank you all for your help .
Sent from my awesome GS4 (I9500)
Click to expand...
Click to collapse
Did you came to know, what was the problem with your device?
Sorry for the last reply but sorry I wasn't able to find out what was wrong....
Sent from my C2104 using XDA Free mobile app

Grand 2 dead boot help

I updated my grand 2 to 4.4.2. But I found slow net issues. Then I decided to back to 4.3 jellybean. But I flash again true odin. But suddenly hang in updating. I remove battery. But I put battery now my phone not charge not going to on . I use many methods to make again download mode. But fail. I have no any jtag. Please give me any easy way to put back my grand 2 in normal position. Please help please help
Sent from my GT-I9500 using XDA Premium 4 mobile app
zahirsb said:
I updated my grand 2 to 4.4.2. But I found slow net issues. Then I decided to back to 4.3 jellybean. But I flash again true odin. But suddenly hang in updating. I remove battery. But I put battery now my phone not charge not going to on . I use many methods to make again download mode. But fail. I have no any jtag. Please give me any easy way to put back my grand 2 in normal position. Please help please help
Sent from my GT-I9500 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
bro there is nothing to worry just go to the nearest service center & tell them you were updating your phone via KIES SOFTWARE of samsung but in between there was a power cut so update stoped in between & after that my phone was not starting ....thats it they would do the needful & repair your handset....hoping your phone will be in warranty...

SM-G530T1 Stock or Cutstom ROM

Okay, I have a Samsung Galaxy Prime with Metro PCS. I was just texting the other day and then my phone reset and I got a black screen saying Blocked by Binary FTP. So yes i made the mistake of bricking my phone and flashing the T-Mobiles SM-G530T firmware. I've looked everywhere for the Stock Rom but can't find it and not sure if there are any Customer Roms for this device. Can someone get me going in the right direction or am i best with just sendng it back to Samsung and letting them flash it?
same boat
http://forum.xda-developers.com/grand-prime/help/sm-g530t1-stock-firmware-kernel-t3236774
I have the fix 4 Galaxy Grand Prime SM-G530T1
I have the firmware 4 MPCS Galaxy Grand Prime SM-G530T1
give me Plissss I need them
HOW
Can I get link too please
I need that firmware also please send me the link as well
Here's the link with Galaxy Grand Prime SM-G530T/ T1 Stock rom flashed via Odin.
http://forum.xda-developers.com/galaxy-core/development/odin-5-1-1-sm-g530t1-oh9-metropcs-t3280445
I know it says "Core Prime" but I assure you its the Grand Prime SM-G530T Stock. it's just a little typo.
It is the T-Mobile version but compatible with MetroPCS 100%. Metro PCS is under T-Mobile in the first place, pretty much the same thing except for the Start-Up & the apps. But it works! & the developer(s) that made the package did an amazing job!
If anyone needs further info feel free to contact me! I would be happy to assist in any way possible.
Kimble_89 said:
Here's the link with Galaxy Grand Prime SM-G530T/ T1 Stock rom flashed via Odin.
http://forum.xda-developers.com/galaxy-core/development/odin-5-1-1-sm-g530t1-oh9-metropcs-t3280445
I know it says "Core Prime" but I assure you its the Grand Prime SM-G530T Stock. it's just a little typo.
It is the T-Mobile version but compatible with MetroPCS 100%. Metro PCS is under T-Mobile in the first place, pretty much the same thing except for the Start-Up & the apps. But it works! & the developer(s) that made the package did an amazing job!
If anyone needs further info feel free to contact me! I would be happy to assist in any way possible.
Click to expand...
Click to collapse
so i bought this phone about 3 months ago (SM-G530T1) and i bricked it 3 days after i bought it by installing busybox un-rooted. still not sure how that happened but that is not the point, the point is i flashed the only stock firmware i could find (at the time) and it just so happened to be a mis-marked T-mobile firmware package. i didn't let it bother me though and continued to gain root and flashed ShinySides [AOF8]. It worked like a charm! I was just running T-mobile FW on a MetroPCS phone and it just got confusing if you have to call costomer service lol. so i made sure it worked in every way and removed all the bloatware. the only problem i had was with the hotspot feature, it had a mind of its own and that got annoying but i dont really use it that often so i could live with that. the phone was a champ! so i went to find a recovery or twrp. i was looking and found TWRP 2.8.7.0...it was not for the SM-G530T1 but it sorta worked and when i say sorta i mean it does pretty much everything you want it to do except BACK UP FILES! Lol! (at least for me anyways) so i ran that with the T-Mobile software for a few months until lastnight... see I didnt know about the failure to back up my files issue so you have to understand that i fully expected the TWRP Backup files to work and last night when i went to restore one of the BUps it informed me that i had no OS anymore !! oh man i wanted to puke! Upon further inspection i realized that it was only backing up about 20% of my system only and i should have noticed but i didn't expect that and that is how we learn the difference between knowledge and wisdom right? OK so at that point i had a bricked phone (MY DAILY DRIVER i might add) and i was not to happy to lose all my personal info either, so i went back on XDA to see what i could do. i was very pleased to see that there was now a working MetroPCS Package compliments of TSAR3000 and I went to work. I flashed it via Oden and was happy to see the familiar MetrPCS logo again, but i needed to re-root it so i used the ShinySides [AOF8] just to see if it would worked with the metro Firmware and it did! it trips KNOX but i could care less cause i dont want that crap anyways and i get rid of it right away lol. I debated if i sould put this next part in the message but i decided i would because people should be weary of programs and roots applications and remember that this is the true reason we root and unlock our phones to begin with... so Im not a paranoid person by nature but i dont trust King root or any of those one click apps companies because of some article i read a while back about how the Chinese root apps and downloads could possibly contain spyware but i never found any truth to it but from what i do know about the Chinese government i dont take the chance but its my opinion and i like the good old fashion (though a little more involved) flashing of SuperSU or whatever you like. So yes if you want to use ShinySides root procedure do it cause it works with metro just fine. Good luck.
cl007x said:
I have the firmware 4 MPCS Galaxy Grand Prime SM-G530T1
Click to expand...
Click to collapse
could u pretty pleeeeeeeezzzzzzzz give me the link for it im begging you ive been searching for the firmware forever and i have not found it anywhere plez help :crying::crying::crying::crying:
veronica94 said:
could u pretty pleeeeeeeezzzzzzzz give me the link for it im begging you ive been searching for the firmware forever and i have not found it anywhere plez help :crying::crying::crying::crying:
Click to expand...
Click to collapse
tsar3000! Please give credit to the original uploader! it wont let me post a link but if you go to Stock FW for MetroPCS SM-G530T1 by Crazedmp3
im running it now and it works perfectly.
Lee_Garington said:
tsar3000! Please give credit to the original uploader! it wont let me post a link but if you go to Stock FW for MetroPCS SM-G530T1 by Crazedmp3
im running it now and it works perfectly.
Click to expand...
Click to collapse
OK but which one is it
It is metropcs stock rom it is right there in the thread directory.
Sent from my SM-G530T1 using XDA-Developers mobile app
Lee_Garington said:
It is metropcs stock rom it is right there in the thread directory.
Sent from my SM-G530T1 using XDA-Developers mobile app
Click to expand...
Click to collapse
OK where do I put the files on odin
veronica94 said:
OK where do I put the files on odin
Click to expand...
Click to collapse
Put the file in AP slot and the metro pit file in the box marked pit and start. And in about 4 or 5 min your phone will reboot and the if you want root and recovery flash Mr Sunnyside's trap kernel AOF8 then after that flash recovery TWRP SM-G530H it's the one recovery I've been able to find that works.. Good luck
ShineLikeMe said:
Put the file in AP slot and the metro pit file in the box marked pit and start. And in about 4 or 5 min your phone will reboot and the if you want root and recovery flash Mr Sunnyside's trap kernel AOF8 then after that flash recovery TWRP SM-G530H it's the one recovery I've been able to find that works.. Good luck
Click to expand...
Click to collapse
i wish someone would have been kind to me and gave me this little rundown when i started rooting my phones way back in the day. direct and to the point good job! anyways i hope there is no issues... i dont see why there would be since i have been running this exact recipe for 7 days and i must say its a rare moment in the phone modifying world when you can say "perfect" this is one of those times... now if we could only get some rom up in here it would really be awesome. hey i jus want to warn you about that TWRP your about to use. i know it to have bugs personally.... the main issue is that it doesnt back up your Data Boot Or recovery or Cache LOL, but everything else works fine so far. it will however back up about 20% of your system and shut of LOL (Basically just enough to add insult to injury) so my advice is use it cause its the best we have but BACKUP SOMEWHERE ELSE! just use the TWRP to flash or do the little weird TWRP things you gotta do K? Good luck!
SM-G530T1
I'm new to this forum. I've soft bricked my Grand Prime, flashed it, put a custom Rom on it and installed TWRP. What I'm trying to do is find the device tree specifically for this phone. If there isn't, how would I go ahead and build it from scratch?
It wont work
Can you please help me it wont work for me it says failed each time i want to do this.
OPDelux said:
Can you please help me it wont work for me it says failed each time i want to do this.
Click to expand...
Click to collapse
Did you unlock the phone and get the developers option in settings menu?
I donated to you
Please send me the link. Paypal email is lmweiss716
i included a note.
please as soon as possible
cl007x said:
I have the firmware 4 MPCS Galaxy Grand Prime SM-G530T1
Click to expand...
Click to collapse

Categories

Resources