Related
Hey guys quick question before I download and attempt it, I have an Australian i9506 (Cat 4 LTE) but we don't have an official 5.0.1 firmware yet.
Can I just download the Nordic version from http://www.sammobile.com/firmwares/database/GT-I9506/ and install it, or would it brick my phone/radios not work?
Thanks
juzza87 said:
Hey guys quick question before I download and attempt it, I have an Australian i9506 (Cat 4 LTE) but we don't have an official 5.0.1 firmware yet.
Can I just download the Nordic version from http://www.sammobile.com/firmwares/database/GT-I9506/ and install it, or would it brick my phone/radios not work?
Thanks
Click to expand...
Click to collapse
Hi mate,
Yes you can !! it will not brick it , you may have (or not) problems with the modem as maybe is not the best for your region but you can always flash another...
should not be a problem
BACKUP first , nandroid and your EFS Folder, just in case there is a problem
Just to add to the previous suggestion, use Wanam's EFS Backup Tool rather than Samsung Tool, as it not only backs up the EFS partition but the hidden partitions where the IMEI and the modem are stored.
Strephon Alkhalikoi said:
Just to add to the previous suggestion, use Wanam's EFS Backup Tool rather than Samsung Tool, as it not only backs up the EFS partition but the hidden partitions where the IMEI and the modem are stored.
Click to expand...
Click to collapse
+1 mate!!
It also depends if your phone is carrier locked.
Thanks for the advice guys I'm giving it a try now, will edit as I go. My phone is not carrier locked (Voda AU don't lock them fortunately but they provide the codes on their website for free to unlock anyway).
So I downloaded Odin3 3.09 and the firmware I9506XXUDOA6_I9506NEEDOA6_NEE (this is the link from sammobile).
I'm following the instructions I found on another site but it's basically put the phone into download mode (home, power and volume down), agree to enter download mode, in Odin for AP select the .tar.md5, make sure Auto Reboot and F. Time Reset are ticked but not Re-Partition or anything else and start.
EDIT 1: The phone rebooted into recovery and updated something, now the phone is booting with a new boot animation. (for those referring to this I was on the latest AU Voda FW, then updated to CM12 5.0.2).
EDIT 2: After the usual nerve-wracking amount of time of first boot the boot logo finally went away and the usual "optimizing apps" message has come up and it's started (235 apps whoa the bloat). Waiting for that but at least it's working to a point where I can recover it. I just realised it's 6:10AM now and I FORGOT TO MAKE A BACK UP. I hope this works but worse case scenario there's a 4.4.2 Vodafone firmware I could flash and try my luck with if this doesn't work out.
EDIT 3: I'm not sure if it's part of the setup process but the word "UP" then a short progress bar appeared on the screen, now I've got only a black screen with a status bar (4G icon is there but no clock). I have rebooted from the power menu, let's see what's going on here.
EDIT 4: Cache wipe from stock recovery didn't work, trying factory reset from stock recovery. I note that the first time I set up the phone it was plugged into the computer with ODIN still running, I don't think it could have interfered but I unplugged the phone this time just in case.
EDIT 5: I'm not sure if it was ODIN or needing to do a factory reset but it's working now, I'm running through the set up. WiFi is working 100%.
Final EDIT: Everything is working 100%, tested the camera, proximity sensor, screen rotation, voice calls, mobile data, wifi and it's all 100%.
juzza87 said:
Thanks for the advice guys I'm giving it a try now, will edit as I go. My phone is not carrier locked (Voda AU don't lock them fortunately but they provide the codes on their website for free to unlock anyway).
So I downloaded Odin3 3.09 and the firmware I9506XXUDOA6_I9506NEEDOA6_NEE (this is the link from sammobile).
I'm following the instructions I found on another site but it's basically put the phone into download mode (home, power and volume down), agree to enter download mode, in Odin for AP select the .tar.md5, make sure Auto Reboot and F. Time Reset are ticked but not Re-Partition or anything else and start.
EDIT 1: The phone rebooted into recovery and updated something, now the phone is booting with a new boot animation. (for those referring to this I was on the latest AU Voda FW, then updated to CM12 5.0.2).
EDIT 2: After the usual nerve-wracking amount of time of first boot the boot logo finally went away and the usual "optimizing apps" message has come up and it's started (235 apps whoa the bloat). Waiting for that but at least it's working to a point where I can recover it. I just realised it's 6:10AM now and I FORGOT TO MAKE A BACK UP. I hope this works but worse case scenario there's a 4.4.2 Vodafone firmware I could flash and try my luck with if this doesn't work out.
EDIT 3: I'm not sure if it's part of the setup process but the word "UP" then a short progress bar appeared on the screen, now I've got only a black screen with a status bar (4G icon is there but no clock). I have rebooted from the power menu, let's see what's going on here.
EDIT 4: Cache wipe from stock recovery didn't work, trying factory reset from stock recovery. I note that the first time I set up the phone it was plugged into the computer with ODIN still running, I don't think it could have interfered but I unplugged the phone this time just in case.
Click to expand...
Click to collapse
Hi mate
How is it going?
If trouble , do a factory reset and flash it again....
Thanks mate that did the trick!
juzza87 said:
Thanks mate that did the trick!
Click to expand...
Click to collapse
glad to hear it mate, you did it!!
Thanks for let in us know.
For any other Aussies out there trying this I'm on day two and everything is working perfectly, getting root is super easy too, just use Odin to flash a custom recovery (Solk's CWM from May 2014 works great), boot into the recovery and install UPDATE-SuperSU-v2.45.zip, exit and when it asks if you want to repair root say yes. Reboot, go to the play store, update to the latest SuperSU and all is well.
DISCLAIMER: YOU WILL BE FLASHING YOUR PHONE AT YOUR OWN RISK. YOU ARE SOLELY RESPONSIBLE FOR ANYTHING YOU DO TO YOUR PHONE, SO MAKE SURE YOU ARE WELL INFORMED AND WELL PREPARED BEFORE DECIDING TO FLASH OR INSTALL ANYTHING ON YOUR DEVICE.
I created this thread with the sole aim of helping the owners of the Japanese SAMSUNG GALAXY ALPHA SC-03E NTT DOCOMO to install the latest version of Android (LOLLIPOP) on their devices without much hassle. All updates will be provided in the future.
REQUIREMENTS
1. A properly functioning SAMSUNG GALAXY ALPHA SC-03E NTT DOCOMO. We don’t want to receive any feedback from users with faulty phones.
2. FULLY CHARGED BATTERY. This is to prevent the phone from going off in the flashing process
3. A CUSTOM RECOVERY installed.
If you don’t have one download Sc03e-KK-KBC-CWM-v6.0.5.1_r2-recovery and install with Odin with same
a. Hold the Power Button + Volume Down + Home at the same time. Your phone will enter Download Mode.
b. Now connect your phone to the PC via USB cable whiles Odin is opened.
c. Now in Odin click the PDA button and open the Rom that you downloaded earlier.
d. Make sure F.Reset time and Auto reboot are all ticked
e. Now click Start button and wait for it to display PASS at the top left corner. Your Phone might restart a few times.
f. If you have an NK2 rom go check this thread on how to root it.
NOTE: If you have an older CWM installed, update to this one.
THINGS TO DOWNLOAD
1. ANDROID LOLLIPOP ROM 5.1 http://site.kbc-brick.org/samsung/sc03e/sc03e_rom_cm12-1]CM12.1 UNOFFICIAL[/URL]
2. GOOGLE APP ...
INSTALLING THE LOLLIPOP ROM
1. Copy the downloaded files and place them in the phone memory or SD card(recommended)
2. BACKUP your current OS in the recovery menu so that you can restore it if you encounter any problems in the flashing process.
3. To Enter the recovery menu, turn off your phone completely. PRESS and HOLD the POWER button + Volume UP + HOME button at the same time . When DOCOMO is displayed leave the power button and still keep holding the other buttons.
4. In recovery, use volume buttons to navigate and Power to select. Now go to wipe data/factory reset and wipe data, then wipe cache partition , then go to advanced and wipe Dalvic cache.
5. When all is done go to install zip and install the cm-12.1-2015xxxx-UNOFFICIAL-sc03e.zip first.
6. When done install the GAPPS package.
NOTE: IF YOU HAVE CWM 6.0.4.7 THE GAPPS PACKAGE WONT INSTALL.
7. Now go back and wipe data , cache partition and Dalvic cache again then reboot. Upon exiting CWM you will be asked to fix your root binaries... say yes!
8. Your phone will boot into Android L with a Cyanogen boot animation.
9. Set up you phone and make sure to update all your Google apps and viola! :good:
NOTE: You will have to enable root in developer options.. enable it by tapping build number several times
future
- wifi
- sound / vibration
- Bluetooth
- base-band
- sensors
- GPS
- Felica (Osaifu-kaitai)
Source
kernel: https://github.com/kbc-developers/kernel_samsung_exynos4412
device : https://github.com/kbc-developers/android_device_samsung_sc03e
reserved
Changelog：
20150422 : Android 5.1.1
20150418 : memorial of cm team stating cm-12.1 nightly ( not for this device )
20150415 : change rom name to AOJP
20150408 : Fix FelicaLock crash
20150406: Support Felica (Osaifu-kaitai)
20150404: First
reserved2
reserved
HELLLLPPP PLEASE, USSD IS IN CHINESE AND SHOWS THE ROAMING SIGN "R" PERMANENTLY.. EVEN WHEN DATA IS ON IT DOESN'T SHE WHETHER EDGE OR 3G OR H ALWAYS R..
PLEEASE HELP MOST IMPORTANT IS USSD
Sent from my SC-03E using XDA Free mobile app
What is the USSD?
I don't know it.
I'm using Docomo SIM.
It seems no problem.
ma34S said:
What is the USSD?
I don't know it.
I'm using Docomo SIM.
It seems no problem.
Click to expand...
Click to collapse
thanks for MA34S's great work
whats new about 5.1? can i flash the cm12.1 over 12.0?
bug report:
The folder displays nothing.
I put 2 icons on the screen together to create a folder. When I open the folder, There's nothing.
When I move the folder to another place. The icons in ther folder are visible once. When I opened twice, the icons are still invisible.
Thanks for your great job! That's really unbelievable that I can use the newest lollipop on my old sc03e. Everything seems to work perfectly except the sound when make a call. I know my listening is not good enough, but the effect of call is not as good as the original system. Could you please make some more efforts to improve this?
Many thanks!
My device will lost the data access of mobile network(GSM edge), especially after the device sleep for a time.
The apn is set and the switch is on, but it's disconnected.
It occurs since cm-12-20150328-UNOFFICIAL-sc03e.zip, cm-12-20150320-UNOFFICIAL-sc03e.zip is ok.
Is there anyone has the same problem.
20150415 is great,thanks for your great job!
Everything seems to work perfectly except the BT, the BT can link to a iphone but sent picture failed
Please keep work for 5.1
USSD code chines
hallo i am from indonesia , please help after flashing this rom all is ok but USSD code change to china or i don;t no. this importan for me.
thx imam:good::good::good:
libinneed said:
bug report:
The folder displays nothing.
I put 2 icons on the screen together to create a folder. When I open the folder, There's nothing.
When I move the folder to another place. The icons in ther folder are visible once. When I opened twice, the icons are still invisible.
Click to expand...
Click to collapse
my device is not shown it....
try again with recent version please.
imamsyafiino01 said:
hallo i am from indonesia , please help after flashing this rom all is ok but USSD code change to china or i don;t no. this importan for me.
thx imam:good::good::good:
Click to expand...
Click to collapse
Sorry I don't know what it is.
cm-12.1-20150422-AOJP-NIGHTLY-sc03e released
you can download my site via OP.
imamsyafiino01 said:
hallo i am from indonesia , please help after flashing this rom all is ok but USSD code change to china or i don;t no. this importan for me.
thx imam:good::good::good:
Click to expand...
Click to collapse
this happened when the developer changed the rom into kitkat RIL.. help us cos ussd code is very important to us like we use it to check our prepaid balance..
hi! am new in xda. where can we download this? Thanks!
ma34S said:
you can download my site via OP.
Click to expand...
Click to collapse
hi! am new in xda. where can we download this? Thanks!
@ma34S could you build a sc03e 4.4.4 kernel for sc03e to use 4.4.4 i9305 touchwiz based rom?
Sometimes, camera is not working..
Camera is not available or not working at some time, is it a bug? in order for camera to work again i need to restart my phone.. can you fix it plz..
anyway, it's a good custom ROM for SC-03E..
great job! but i think that team ub's 5.1.1 rom is the best
Hey guys,
Long time user of XDA here, but first time poster in this forum. I would like to request help for my mother's Asus Zenfone 5 LTE (model number T00P), which has recently began to function in a way to makes it unsuitable as a daily driver. The phone is slightly over 2 years old, running stock 4.4.2, build number KOT49H.WW_Phone-11.4.6.94-20141218044000274_201406050026. I am unsure about the circumstances in which the following behaviour started.
Half the time when it boots, it immediately shows a lot of core apps FC-ing, like com.android.phone and com.android.systemui, along with another one buried, which is the KeyGuardTestActivity FC. Other times, it boots normally, but some apps do not work properly: the Phone app fails to launch as Contacts FC, Settings FC when trying to access the All tab under Applications, the file manager FC. With SIM card inserted, mobile connectivity is also a hit and miss. Holding the power button causes the phone to do a soft reboot, rather than bring up the power menu. I cannot gain ADB authorisation as SystemUI also FCs when trying to come up with the RSA authorisation message. Much of these issues render the phone pretty much unusable.
Up till this point, the phone has remained unrooted and untouched, XDA-wise, and can boot in recovery and CSC modes. However, there was a system update that was found in the stock updater, but could not be installed due to Status 7 (framework-res.apk has unexpected contents). After that failed update, there was no change to the phone, and the updater no longer works.
I have since rooted the phone with Kingroot, but freezing the keyguard produces more issues. I am at a loss at this juncture, as I am trying my best to save the phone short of a data wipe. I am very sure a data wipe would solve the issues, but many backup apps simply FC, as I would also like to backup data to shift to a new phone.
Are there any ways to help? Thanks in advance for any answers.
Never heard an XDA member let their devices remaining stock after 2 years. The best choice for you is flash another rom, Stable android 5.1 to 7.1
No need to root to unlock bootloader and flash TWRP. More details you can research around here.
If you don't want loss data, use adb command to copy it to your lap or pc. Or here: http://www.droidviews.com/push-pull-files-android-using-adb-commands/
Redaki said:
Never heard an XDA member let their devices remaining stock after 2 years. The best choice for you is flash another rom, Stable android 5.1 to 7.1
No need to root to unlock bootloader and flash TWRP. More details you can research around here.
If you don't want loss data, use adb command to copy it to your lap or pc. Or here: http://www.droidviews.com/push-pull-files-android-using-adb-commands/
Click to expand...
Click to collapse
I don't think there are custom rom available for zenfone 5 LTE model .So that gives no choice but to stay on stock rom.
---------- Post added at 07:12 AM ---------- Previous post was at 07:10 AM ----------
NightRaven49 said:
Hey guys,
Long time user of XDA here, but first time poster in this forum. I would like to request help for my mother's Asus Zenfone 5 LTE (model number T00P), which has recently began to function in a way to makes it unsuitable as a daily driver. The phone is slightly over 2 years old, running stock 4.4.2, build number KOT49H.WW_Phone-11.4.6.94-20141218044000274_201406050026. I am unsure about the circumstances in which the following behaviour started.
Half the time when it boots, it immediately shows a lot of core apps FC-ing, like com.android.phone and com.android.systemui, along with another one buried, which is the KeyGuardTestActivity FC. Other times, it boots normally, but some apps do not work properly: the Phone app fails to launch as Contacts FC, Settings FC when trying to access the All tab under Applications, the file manager FC. With SIM card inserted, mobile connectivity is also a hit and miss. Holding the power button causes the phone to do a soft reboot, rather than bring up the power menu. I cannot gain ADB authorisation as SystemUI also FCs when trying to come up with the RSA authorisation message. Much of these issues render the phone pretty much unusable.
Up till this point, the phone has remained unrooted and untouched, XDA-wise, and can boot in recovery and CSC modes. However, there was a system update that was found in the stock updater, but could not be installed due to Status 7 (framework-res.apk has unexpected contents). After that failed update, there was no change to the phone, and the updater no longer works.
I have since rooted the phone with Kingroot, but freezing the keyguard produces more issues. I am at a loss at this juncture, as I am trying my best to save the phone short of a data wipe. I am very sure a data wipe would solve the issues, but many backup apps simply FC, as I would also like to backup data to shift to a new phone.
Are there any ways to help? Thanks in advance for any answers.
Click to expand...
Click to collapse
Well i don't have LTE model ... But i would suggest you to upgrade to latest android version provided by Asus for your model and see if the problem persisit ....
Redaki said:
If you don't want loss data, use adb command to copy it to your lap or pc. Or here: http://www.droidviews.com/push-pull-files-android-using-adb-commands/
Click to expand...
Click to collapse
Like I said in the OP, I cannot authenticate ADB as SystemUI crashes upon generating the notification for verification.
Boomshiva said:
Well i don't have LTE model ... But i would suggest you to upgrade to latest android version provided by Asus for your model and see if the problem persisit ....
Click to expand...
Click to collapse
Again, in the OP, I've mentioned the Updater does not work.
Are there any other solutions?
Redaki said:
Never heard an XDA member let their devices remaining stock after 2 years. The best choice for you is flash another rom, Stable android 5.1 to 7.1
No need to root to unlock bootloader and flash TWRP. More details you can research around here.
If you don't want loss data, use adb command to copy it to your lap or pc. Or here: http://www.droidviews.com/push-pull-files-android-using-adb-commands/
Click to expand...
Click to collapse
Yes, but there is no custom rom for zenfone 5 lte. maybe neither custom recovery or root.
Sorry i didn't read your post carefully. Did you try to unlock bootloader ? I think it will be the same as the Intel model. Try fastboot and then fastboot OEM unlock, or flash some ifwi file like Intel model.
Then if bootloader is unlocked, flash TWRP and u will have ADB.
EDIT: Solution was to sit with OP5 technician which flashed my ROM to Oxygen 4.5.1. After this didn't do it, I RMA-ed it and got a new OP5.
EDIT: TL;DR: After updating OP5 to 4.5.5, It doesn't recognizes sim nor wifi, and can't rollback to 4.5.3 that did and stuck on phone setup (needs wifi). ADB devices is empty, I have Google USB Driver from SDK, Windows 10
Hello,
I just got a new OP5 today.
Opened it in the store, came with Oxygen 4.5.3 outta the box.
I putted the sim in, and I connected to the store's wifi, all was good and even had a phone call to my mother to check if the mic and speaker are working well.
Then when I got home, I upgraded the OS to 4.5.5 through the settings, where Android suggested. I'm new to OP and android (moved from iphone 5) and so if there is a right way to do it, and that's not it, I wouldn't have known.
Then, OP5 didn't recognize the sim anymore and couldn't start the wifi (switching it on wouldn't work, it would do nothing), so I tried Factory reset. Unfortunately it didn't reset the OS as well and now I'm stuck outside can't use my sim card or connect to my home wifi to setup the device.
Tried installing OP5 usb drivers (show when connecting the OP5 to PC) and press the power button and lower speaker volume together, then flush the 4.5.3 OS through USB, but it doesn't recognize ZIP folder and when I tried to unzip and send boot image (cmd->"adb sideload boot.img) it started and then failed at 0%.
Please help, the phone right now is unusable.
Tried the Factory reset through settings, but it took so long I thought it was stuck, so I did it through recovery screen.
Sounds like you got a lemon... I'd take it back and see if they'll swap it for another. Less than a week should be replaced immediatelly, at least that's been my experience here in Oz...
ultramag69 said:
Sounds like you got a lemon... I'd take it back and see if they'll swap it for another. Less than a week should be replaced immediatelly, at least that's been my experience here in Oz...
Click to expand...
Click to collapse
Why should it be replaced in less than a week? Also, isn't there a fix for adb problem so I could flash 4.3.5? Maybe a remote takeover?
Mine had 4.5.3 on it when I got it, updated to 4.5.4 then manually downloaded full rom, placed on internal memory and flashed 4.5.5 through the settings.
Had zero problems with WIFI before, during and after the update. No problems since.
Generally updating to a higher firmware version won't allow you to regress back to the lower, not sure with Oneplus as this is my first.
I'd also, if you can boot into Android go to settings nd check my IMEI numbers to see if they have been wiped (this can cause the sim to not be recognised) . If you have no IMEI then that is a BIG problem which will require an RMA unless you had backed up your efs files which from your description I doubt..
If the IMEI is OK I would download the full firmware version from here - https://forum.xda-developers.com/oneplus-5/how-to/oneplus-5-mirrors-official-oxygen-os-t3628190 - then using PC put the FULL ROM onto the internal memory then go to recovery and flash.
I'd also then unlock my bootloader(Just remember though that the phone will wipe all data after unlocking bootloader) and install TWRP - don't forget to 1st enable developer mode in settings and then allow usb debugging and OEM unlock - make a backup of the working stock rom and put it somewhere safe - home PC, in case this happens again. Best idea is to use the all-in-one tool, here - https://forum.xda-developers.com/on...l-skipsoft-android-toolkit-oneplus-5-t3625419 thankyou MSkip.
ultramag69 said:
Mine had 4.5.3 on it when I got it, updated to 4.5.4 then manually downloaded full rom, placed on internal memory and flashed 4.5.5 through the settings.
Had zero problems with WIFI before, during and after the update. No problems since.
Generally updating to a higher firmware version won't allow you to regress back to the lower, not sure with Oneplus as this is my first.
I'd also, if you can boot into Android go to settings nd check my IMEI numbers to see if they have been wiped (this can cause the sim to not be recognised) . If you have no IMEI then that is a BIG problem which will require an RMA unless you had backed up your efs files which from your description I doubt..
If the IMEI is OK I would download the full firmware version from here - https://forum.xda-developers.com/oneplus-5/how-to/oneplus-5-mirrors-official-oxygen-os-t3628190 - then using PC put the FULL ROM onto the internal memory then go to recovery and flash.
I'd also then unlock my bootloader(Just remember though that the phone will wipe all data after unlocking bootloader) and install TWRP - don't forget to 1st enable developer mode in settings and then allow usb debugging and OEM unlock - make a backup of the working stock rom and put it somewhere safe - home PC, in case this happens again. Best idea is to use the all-in-one tool, here - https://forum.xda-developers.com/on...l-skipsoft-android-toolkit-oneplus-5-t3625419 thankyou MSkip.
Click to expand...
Click to collapse
I can't pass the "Connect to Wifi" in the initial setup of the android, as it finds no wifi networks (but of course there are, when I use the sim in my iphone it works properly and there are wifi networks). So I don't know how can I get the IMEI number.
Right now my PC recognizes the OP5 connected via USB, but "adb devices" bring back empty list.
I think that once I get that working, I could unlock the bootloader. But I can't seem to be able to enable dev mode in settings - I can't get there.
I can only get to the recovery screen beyond the initial steps of setting up android.
Right now there is no important data on the phone and I have my laptop which is virgin to ADBs and Drivers (didn't use it to try to resolve it).
What driver and where do I get the right ADB so I could load 4.5.3 from usb to the phone?
When you upgraded, did you wipe cache and dalvik?
Binary Assault said:
When you upgraded, did you wipe cache and dalvik?
Click to expand...
Click to collapse
Wiped after the upgrade whem problems started
Might be wrong but I thought you could skip the wifi select screen on the setup wizard.
If you can get to Android you need to go to settings, scroll down to about phone and tap around 8 times on build number to enable developer settings.
You might be able to, might, pull down the settings menu in the wizard and bypass the wizard.
ultramag69 said:
Might be wrong but I thought you could skip the wifi select screen on the setup wizard.
If you can get to Android you need to go to settings, scroll down to about phone and tap around 8 times on build number to enable developer settings.
You might be able to, might, pull down the settings menu in the wizard and bypass the wizard.
Click to expand...
Click to collapse
It doesn't seem like I can skip it. Can't pull down a menu or anything
I guess only Oneplus can help me now?
Do you have any suggestion on fixing adb so it would recognize the OP5?
No, you need to enable debugging in developer settings for ADB to recognise.
Time to RMA...
ultramag69 said:
No, you need to enable debugging in developer settings for ADB to recognise.
Time to RMA...
Click to expand...
Click to collapse
Welp it is a pickle.
Going to go live chat with OP "level 2" representative.
See if they wipe the phone out and restore an older ROM.
If that't not going to work, RMA it is :/
Shame. A new phone. Took only one picture with my dad when we opened it back at the store. nothing else.
Unfortunately bad things can happen... You just got to be the one who got the dud this time round.....
Here's hoping it's the last time....
you can force update to a fresh installation of 4.5.5 by putting the 4.5.5 full zip into your phone in a folder called "update". Reboot to recovery im assuming you have stock recovery and follow the steps until you find the option that says something along the lines of "Update manually". It will detect if you have an update folder stored on your phone and it will begin reinstalling OOS 4.5.5. It sounds like a software problem but could be a hardware problem. Rule out the first option before RMA the latter.
OcazPrime said:
you can force update to a fresh installation of 4.5.5 by putting the 4.5.5 full zip into your phone in a folder called "update". Reboot to recovery im assuming you have stock recovery and follow the steps until you find the option that says something along the lines of "Update manually". It will detect if you have an update folder stored on your phone and it will begin reinstalling OOS 4.5.5. It sounds like a software problem but could be a hardware problem. Rule out the first option before RMA the latter.
Click to expand...
Click to collapse
When I connect the OP5 to the PC there are no folders under it (Computer -> OP A500 -> no folders), but I'll try and give it a shot. see what happens. Will update this reply.
Update:
After Oneplus flashed Oxygen 4.5.1 on the phone and some other magic I was able to skip wifi step on setup, yet still when I try to activate it it won't budge. the slider won't move and it looks as the page is being refreshed. Also, when I try to get into sim section in settings it would just freeze and alert the program stopped and suggest to close or wait.
Oneplus says it is hardware issue, and the fact it happened when I upgraded to 4.5.5 from settings menus is coincidence. They say I need RMA it.
If anyone knows how to fix it then I'm more than welcome to hear it.
EDIT: it also won't shut off unless I long press the power button.
Hi all! I know that Mobile Upgrade Q is long gone and I have a program that will reset your Idol 3 back to factory settings with the factory ROM. I have used this program in the past, but unfortunately I no longer have the device.
What you will have to do is download the program available here: https://drive.google.com/open?id=1Sd99aiZIL8JSpXwAiwGitulNFbJxi2Z4
After downloading there will be a folder named "SUGAR QCT_SP v11.1.2" open this folder and use the setup installer to install the program. After installing (assuming you have the necessary usb drivers installed that can also be found within the folder but I assume many of us have it already installed) open the program "SUGAR QCT_SP_Gotu2" which if memory serves me correctly, will be placed on the desktop.
Note that you will have to have your device connected to the computer prior to launching the application.
A window will pop up asking you for a username and password. The username and password can be found in the downloaded folder in a file named "sugarpw". The user name is "SU_IN.Panasonic" without quotations and the password is "KoD8naL2".
If any window pops up regarding updates to the program, do not update it as it can cause complications when trying to restore. After this point I cannot remember much of the program because as you need your device to be connected in order to access it, I cannot see it personally. From what I remember there is a drop-down box in which you will need to select your model of Alcatel device. Then there will be two buttons from what I remember. "Get root status" (or something along the lines of this maybe "check root" I am not sure) you need to press the Upgrade or Restore button. I am not sure past this point but I assume someone can comment on this procedure exactly but this should be enough to get you through the process.
~Jason
hello, first time i write here after long time reading about idol3 recovery, i was almost out of ideas, my 6039k dual sim (italy) got bricked hard as couldn't do any backup, no usb debug no adb no custom recovery, plus alcatel do not share stock rom so this software and chewyboy0 saved my phone. thank you very much. Stefano
thank u a lot you saved my phone i was not able to restore my 6045k dual sim and i was having twrp recovery but there is no roms for dual sim 6045k exept cyanogenmod 12 which was making a lot of problems glitches very annoying . by the way it after your instruction no much left behind the most important thing is after connecting your phone usb put the phone in download mode manually by pressing volume up and down with usb connected after turning your phone off till download screen popup then press volume up continuously till screen turn off , the program can not go to download mode automatically so do it manually then press upgrade in program then screen will popup asking u are u sure u want to install this rom with firmware num etc... agree and wait till it done .thank a lot chewyboy0 god give u the right path and keep u happy in life and last thanks again
Just wanted to share my experience. I actually had to upgrade the software in order to get my 6045O from cricket to restore it back to the original cricket MM. In fact, before I upgraded the software it just said 6045 and afterwards it showed multiple versions of the 6045 including the 6045O. Anyways, I just booted into download mode and pressed upgrade and waited 30 minutes. After setting my phone up I went ahead and used Alcatel Flasher to install TWRP and root my phone again.
I was beginning to give up hope. Before updating the software I kept getting model mismatch error. Had already used Eluga, which dumped by Lte for HSPA+ and I tried flashing every radio possible, which only made it worse to where the sim wasn't detected.
If you can help, on the Alcatel website it was necessary for the idol 3 Mobile_Upgrade_Q_5.1.8_Setup.exe and in fact contact me with Alcatel support and the only thing they told me was that I had to send it, but it had a cost, and My last option was to do the trial and error, so I saved it with the Mobile_Upgrade_Q_5.1.7_Setup.exe and it worked.
Note:
My idol 3 is 6045I
Android 5.0.2
I also use Google translator, I do not know English
It worked for me!
Before opening the program "SUGAR QCT_SP_Gotu2" I had to put my mobile in "Download Mode"...
Step by step:
1: Download the program available in the link posted in the threat;
2: Extract the downloaded zip file and open the "SUGAR QCT_SP v11.1.2" folder, then setup installer to install the program;
1: Turn off your device completely and connect it to your computer with a USB cable;
2: Put your mobile in "Download Mode". For Alcatel Idol 3 6039J, push and hold the Power and Both the Volume Buttons, a Red Screen should appear in your mobile, then release all buttons and quickly hold the Volume Up Button until the screen turns Black;
3: Open the program "SUGAR QCT_SP_Gotu2" which will be placed on the desktop (when asked, allow windows administrator privileges);
4: Enter with username (SU_IN.Panasonic) and pw (KoD8naL2), click on "OK" button;
5: Click "No" to quit updating;
6: Select your device model in "Product Models" list (6039 for Idol3 4,7");
7: Click in "Upgrade" button and wait until the end (it takes a while for downloading the firmware and writing it into your device);
8: Your device should restart automatically running the stock ROM.
9: Have fun
Hi
I tried the app but it says it's wrong password...
Don't you know any other solution ?
Thanks a lot
newbie_or_not_newbie said:
Hi
I tried the app but it says it's wrong password...
Don't you know any other solution ?
Thanks a lot
Click to expand...
Click to collapse
Same for me:
Error code = 401 Wrong server location, user name or password
Same situation here - error 401, anyone got an update ?
Hi
I could restore with Mobile Upgrade Q 5.1.8
Available on alcatel-mobile.com
Idol 3 was restored to Marshmallow, so I don't know if root is possible after restoring.
johnnybelite said:
Just wanted to share my experience. I actually had to upgrade the software in order to get my 6045O from cricket to restore it back to the original cricket MM. In fact, before I upgraded the software it just said 6045 and afterwards it showed multiple versions of the 6045 including the 6045O. Anyways, I just booted into download mode and pressed upgrade and waited 30 minutes. After setting my phone up I went ahead and used Alcatel Flasher to install TWRP and root my phone again.
I was beginning to give up hope. Before updating the software I kept getting model mismatch error. Had already used Eluga, which dumped by Lte for HSPA+ and I tried flashing every radio possible, which only made it worse to where the sim wasn't detected.
Click to expand...
Click to collapse
newbie_or_not_newbie said:
Hi
I could restore with Mobile Upgrade Q 5.1.8
Available on alcatel-mobile.com
Idol 3 was restored to Marshmallow, so I don't know if root is possible after restoring.
Click to expand...
Click to collapse
Hello,
Restoring via Mobile Upgrade Q isn't option for me ...i've tried multiple times.
Thank you !
dan1t000 said:
Hello,
Restoring via Mobile Upgrade Q isn't option for me ...i've tried multiple times.
Thank you !
Click to expand...
Click to collapse
Just 3 weeks ago, I was able to restore (in Canada) my Idol 3 to stock MM using Mobile Upgrade from download mode (I think it was version 5.1.7 as 5.1.8 would not do anything).
Here is a download link:
5.1.7:
https://mega.nz/#!KmogkYAa!e5y6ZSM98...jANMglrhB4rtHo
5.1.8:
https://mega.nz/#!OuhEGaaQ!g6mH6RE7v...qh1fmCtHzhHptI
Thanks a lot mate!
tess1 said:
Just 3 weeks ago, I was able to restore (in Canada) my Idol 3 to stock MM using Mobile Upgrade from download mode (I think it was version 5.1.7 as 5.1.8 would not do anything).
Here is a download link:
5.1.7:
https://mega.nz/#!KmogkYAa!e5y6ZSM98...jANMglrhB4rtHo
5.1.8:
https://mega.nz/#!OuhEGaaQ!g6mH6RE7v...qh1fmCtHzhHptI
Click to expand...
Click to collapse
mega says enter decryption key ???
but thanks to you mentioning the version i managed to google and download it
Hi all, I wrote a 2022 update on how to put the non-responsive phone into a fastboot state. You can find it here:
[TOOL] Sahara & Firehose Test (Alcatel Flasher oncoming ...)
Let me introduce some new tool for you. This is my first practice in learning and understanding "How to work with Sahara & Firehose?" and as an owner of Alcatel Idol 3 4.7" firsts test of this app were made on my Idol 3 6039Y. What is this...
forum.xda-developers.com