I really need some help please! I think I may have done something very bad. I have a tmobile mytouch 3g. I was trying to update from cyanogenmod 4.2.1.9. I was using a darkstar theme from ringer nation.
Here’s where I think i screwed myself. I am fairly new to all this stuff so I was trying to find a guide on how to update the mod and instead of doing it properly by adding the files to the sd card, doing a wipe, and then installing everything. I instead messed up and did an install of sapping.nbh and basically followed all the directions to originally root the phone. Including formatting the sd card and everything. When I realized that i was doing this all wrong I was still able to load my os and everything seemed ok. I was getting a sd card error that said that the card was blank or had an unsupported file system, but I was able to mount it so, I erased everything off the card and then put the cyanogen update and the drc83_base file and attempted to load into recovery and do the update.
I loaded into and did a wipe. I attempted to follow the instructions on upgrading from the cyogen page. (God I wish I had found that page first) But after I did the wipe and I attempt to Apply any from SD I get “error: sd card is not mounted”
When I attempt to reboot the phone it goes to the tmobile mytouch logo, THEN it goes to my them logo from Ringer Nation, then it just goes to a black screen I let it sit there for like 5 minutes to see what would happen, but nothing. So I took out the battery and sim. I can get into recovery though so I hope that someone can help me figure out where to go from there.I thought that since I had done a wipe that the theme would have been deleted as well? This is weird.
I did do a nandroid backup before. Hopefully that will prove to be helpful. Sorry for the long post, but I wanted to dump as much useful information about this problem so that hopefully someone will be able to help! BTW I'm using a mac with the latest snow leopard software.
As I am desperate for help, please reach out to me via aim – icolinirie or via email
Thank you in advance for everything. This is a great community, and all of Cyanogen’s work is greatly appreciated!!
EDIT: I really need some help! Here's some more information. I have a Magic 32B. Its running Cyanogenmod v1.4 + JF Recovery.
From what I have gathered I need to adp into my phone in order to get it to mount. Anyone know how to do this on a mac. I am trying, but I don't fully understand. I have created the .bash_profile from terminal and typed the following "export PATH=${PATH}:/Users/itunes/Documents/android-sdk-mac_86/tools" which is the path to the tools file in the sdk. I am just stuck at this point. I don't know what to do from here.
Hi I quote.
Install SDK utilities you need to connect your PC to your phone
You can download the full SDK from the Android Developer website for your platform
http://developer.android.com/sdk/index.html
You'll need to download the SDK appropriate for your platform and extract it into a directory somewhere. I'm going to assume you're using Windows here and suggest you extract it into a folder called
C:\AndroidSDK\
on your hard disk. You can put it anywhere you like really, but if you do you'll need to substitute it for the folder above.
Add the tools directory to your system path for easy access
In Windows it's easy to add the Android SDK Tools directory to your system path. Doing this lets you use the Android SDK tools anywhere and makes it easier for you.
On Windows XP: Go to Control Panel->System, Choose the 'Advanced' tab and then click 'Environment Variables' To do this on Vista/Windows7: Simply go to Control Panel->System and choose 'Advanced System Settings' and then 'Environment Variables'
Now that you've got here locate Path under System Variables and click Edit, then add the following to the end of the string displayed:
;C:\AndroidSDK\tools\
Then click OK until you get out of the menus.
Now that you've done this you should be able to bring up a command shell and type 'adb' and it should run straight away without needing to change path.
Please note that you can skip this step completely if you find it too complicated - however you will need to CD to the ?AndroidSDK\tools every time you open up a command prompt so it's worthwhile doing. I'm going to assume you have made the change above in all further examples as it gets too complicated really. If you're not confident in a DOS shell, I'd suggest you do a little bit of reading up on basic navigation in DOS first.
Enable Debugging mode on the phone before connecting to PC and installing the ADB driver
Menu > Settings > Applications > Developement > USB Debugging
Install the USB drivers correctly - check using "adb devices".
If you have already connected your phone to your computer before then the USB drivers are probably already loaded. If you're lucky then typing 'adb devices' in a command prompt will produce something like:
C:\AndroidSDK>adb devices
List of devices attached
XXXXXXXXXXXX device
Where XXXXXXXXXXXX is the serial number of your phone. If it doesn't produce that line, then you need to check Device Manager and ensure the device drivers for your phone were installed correctly.
If you are having issues installing the ADB driver, you need to connect your phone then go into Device Manager and check the ADB device properties. Check the following property and it'll look something like:
Device Instance Id: USB\VID_0BB4&PID_0C02&MI_01\7&293A7D0D&0&0001
To fix the driver installation problem, you need to edit the driver's .ini file and change all the references of 0C03 to 0C02, or 0C02 to 0C03 if your device property states your Device Id is 0C03.
Note: After flashing a new ROM, your Device Id may change again to either 0C03 or remain as 0C02. So you need to update the .ini file again as above to refelect the change and re-install the driver. Another known way to fix the above issue is to download and install HTC Sync - this seems to install the correct drivers.
How to use ADB
ADB stands for Android Debugging Bridge - it's a useful way of talking to your handset while it's running. ADB provides commands for copying files to and from your phone, installing packages and debugging your Android applications.
Useful commands include:
adb devices - lists which devices are currently attached to your computer
adb install <packagename.apk> - lets you install an Android application on your phone
adb remount - Remounts your system in write mode - this lets you alter system files on your phone using ADB
adb push <localfile> <location on your phone> - lets you upload files to your phones filesystem
adb pull <location on your phone> <localfile> - lets you download files off your phones filesystem
adb logcat - starts dumping debugging information from your handset to the console - useful for debugging your apps
adb shell <command> - drops you into a basic linux command shell on your phone with no parameters, or lets you run commands directly
How to use Fastboot
Fastboot is another boot method and is used to drop the phone into a safe mode to load/flash alternate roms. You need USB debugging turned on before you can use Fastboot mode - so I'd recommend you do this first (under Settings->Applications->Development->USB Debugging). You will also need to power off your phone first (hold down Power and select Power Off) and then hold down the Back+Power Buttons to start the phone in Fastboot mode. You will need your USB cable connected to be able to issue any commands and assuming your drivers are correct you should be able to issue:
C:\AndroidSDK>fastboot devices
List of devices attached
XXXXXXXXXXXX fastboot
Other commands in this mode include - we'll cover these below in subsequent sections.
fastboot boot <filename> - boots a rom stored on your pc specified by the filename
fastboot flash <partition> <filename> - flashes a rom stored on your pc, partition can be one of {boot, recovery, system, userdata}
fastboot binaries for mac and linux can be found here.
3. Learn how to use fastboot and boot a recovery rom
Download a recovery rom for your device
There are several different recovery roms available for the HTC Magic devices.
Amon_RA has created several nice recovery roms available from http://forum.xda-developers.com/showthread.php?t=530492 and get the Recovery Rom appropriate for your device - these recovery roms have Nandroid Backup and Nandroid Restore and are perfect for the average user.
You can also use Cyanogen's 1.3.1 Recovery ROM available for: PVT32A devices and PVT32B devices - this rom has some additional options for partitioning your SD card for ?Apps2SD/Swapper/etc.
Fastboot the recovery rom
Fastbooting a rom doesn't write anything to your device - it just loads it directly from your PC - so it's a completely safe way of fixing/recovering/backing up your existing rom. To fastboot a rom you need to first drop your phone into Fastboot mode and check that it's working. Now drop into a command shell and make sure the recovery image you're wanting to load is in the same directory that you're running this in. If it's called something other than recovery-rom.img then substitute that instead.
C:\AndroidSDK> fastboot boot recovery-rom.img
If you are having problems changing the directory in the command prompt, just make a copy of the command prompt .exe itself, and place it in the folder that contains the recovery rom, then run the above command.
And once again, if you have a perfected SPL which does not allow remote fastboot, you will have to fix it first.
Use the Recovery Rom to Backup your current ROM with Nandroid
Once you've booted to a recovery rom - you can use the Nandroid Backup option. If you get a 'cannot mount /dev/mkblkxxx error' when you do this then check your microSD card is inserted correctly and if so, wait a few seconds for it to register to the recovery rom correctly. If at first you don't succeed, try, try again (sdcard can take a few seconds to mount!)
You do not need to be a rocket scientist to do this.
you can use the ADB to put in recovery again by fast boot
http://forum.xda-developers.com/showthread.php?t=530492
Hey! First off Thanks for the reply! I really appreciate someone chiming in to throw some advice my way! But while reading your thread you described the instructions for windows. In this case I have a macbook pro running snow leopard.
I did download the android sdk to my documents folder and I understand that I need to execute some scripts from the terminal on my mac to get things running. But I really dont know what those scripts are or what exactly to do.
I can get into the recovery mode on the MyTouch by holding power and home when powering on. So do I open the console from the recovery screen on the mytouch and then run the scripts on the terminal from my macbook? And which scripts should I run to get the sd card mounted onto my desktop (that is what I'm trying to do). Im not too sure what to do from there either. I want to get the phone back to stock android 1.5 os so that I can root again. My sd card has to be corrupted because it keeps giving me an error saying that it wont mount when I try to do a fix file systems or try anything from that menu. What to do??
What!
can you get in the recovery?
Yeah I can get into cyanogen v1.4 recovery. I'm just stuck from there.
Ok ok If I understand this correctly then you are not briced. you do not have any imag on your phone.
if you do not have anything nadroid recovery on sdcard you must enter a new ROM on the sdcard and flash it
remember full wipe.!
Yes this is what I believe I must do. But I need to either find a way to mount my SD card from the phone while it is in recovery mode (cyanogen v1.4). That's my problem.. I wish there was an easier way to get it mounted onto my mac from the recovery screen. I think I'm just going to go to best buy tomorrow and get a micro sd card reader and maybe another sd card just in case.
Once I have done that though. What files should I put onto the sd card in order to flash it back to original factory android 1.5.
What do you think?
Good idea
I have never used cyanogen v1.4 recovery
I use the recovery-RA-sapphire-v1.5.2H.img and ther you can use USB togle in recovery mode, You must go to the store to buy the adapter that fits on your Mac, I have two adapters for your Mac, you can borrow
Yeah that's the plan for tomorrow. Thanks for the offer man. But I'm in Los Angeles, Ca LOL!! Where are you?
icolinirie said:
Yeah that's the plan for tomorrow. Thanks for the offer man. But I'm in Los Angeles, Ca LOL!! Where are you?
Click to expand...
Click to collapse
Bergen . norway.
http://maps.google.no/maps?f=s&utm_...o-google-gm&utm_medium=ha&utm_term=google map
OMG! WOW! Looks like a beautiful place! LA is a concrete jungle but beautiful in its own respects. Bergen looks like a very comfortable place! I enjoy finding out about these things. Maybe someday I'll visit. I'd definitely love to!
icolinirie said:
OMG! WOW! Looks like a beautiful place! LA is a concrete jungle but beautiful in its own respects. Bergen looks like a very comfortable place! I enjoy finding out about these things. Maybe someday I'll visit. I'd definitely love to!
Click to expand...
Click to collapse
it is sick cold. I'll take one picture out the window
Hi guys.
Sorry for this noobish post, but i cannot remember for the life of me on how to install things by using 'adb' - i know there is an option on the phone, but where bouce is it? I used it when rooting, but i just cant find it.
I'm trying to install a new boot image, but when i go into cmd i type "adb remount" and the reply is "device not found"... AndroidSDK is in my C directory.
Another EDIT; I just rebooted my device into the recoverymode, and i didn't see ndroid back up thing, does that mean my phone hasn't actually been rooted... - But my phone is deffently debranded.
Thanks if anyone can help my noobish style.
Slim.
When in recovery mode you must have the driver installed. If you enter 'adb devices' it should give you the serial number of your device, if the driver is installed correctly.
To enter the recovery menu you must run the recovery-windows.bat from modaco if using windows or a similiar file (recovery-linux.sh, recovery-mac.sh) according to your operating system. The file should be run when in recovery-mode or else it returns a whole bunch of errors.
Awesome, thanks mate. Just what i needed! Could i have advice what driver i need to be able to acsess the adb?
I just use the driver supplied in the newest version of ADB.
You can get it here. usb_driver.rar
Or else just install HTC Sync from htc.com. It also has the driver files needed.
Remember to have USB Debuging enabled from the Programs/Development menu.
I have tried to install KFU v0.9.3, but i get a command message stating that not recognised as an internal or external command. How can i fix this to allow the installation of KFU? I using XP if that helps
Thanks
oh so very vague.... try following the steps carefully 1 by 1 and you'll get it done.
which step are you currently on of the guide your trying to follow, and if you could link to it
Thanks Zothes, the guide im following is this
youtube.com/watch?v=AZ88CYWv0FU
So im pretty much at the first step, where i need to install Kindle Fire Utility to my PC, but the command screen flashes up stating 'and is not recognised...
Apologies for being vague, let me know what other details you require
what is not recognized, which command?
do you have the KFU opened or are you unable to install the drivers?
'and' is not recognised, im unable to install the drivers
i suggest you search through this thread
Following the steps from the thread http://forum.xda-developers.com/showthread.php?p=24124828#post24124828, I lost my device on fastboot command (I followed correctly all the steps).
The device freezes on the startup screen and the PC can't recognize it properly. So the next fastboot command stays awaiting the device indefinetly.
The Android ADB Interface still remains untouchable on devices panel, but as an unspecified device. So, Windows doesn't mount the internal storage and consequently it is apparently impossible to change the damages.
Does anyone know something that can be useful?
install the correct drivers for fastboot and go ahead:
http://forum.xda-developers.com/showpost.php?p=22342376&postcount=6
i had the same problem
used this link helped get my device up again
http://forum.xda-developers.com/showthread.php?t=1422832
Hello,
i wanted to flash the slimbean rom on my nexus 7 3g but was stupid enough to format the whole storage, so that nothing is left on it.
i tried to connect the device to my pc by mounting it, but it seems not to work, because nothing happens.
well, i found out that i can install the rom from sideload. and after googling it, i managed to find out that i have to install the nexus 7 adb drivers through android sdk, which i did.
to test it, i opened the cmd and typed in "dir", but there was no android-sdk listed. what did i do wrong?
my cmd does not understand the command "adb sideload", although the adb drivers are listed in the device manager...
please help me, i need my nexus 7 tomorrow...
thanks in advance!!