Bluetooth changes from B20 to B27? Bluetooth remote stopped working - ZTE Axon 7 Questions & Answers

http://m.banggood.com/BT-005-12M-Bluetooth-Media-Button-Support-IOS-Bluetooth-3_0-Android-OS-4_0-p-1017379.html
I have a cheap Bluetooth remote called the BT-005. Mounted to my steering wheel it allows me to change music tracks while following local driving laws (can't touch a phone while driving). It worked perfectly when my Axon 7 was stock: A2017U with B20. I could turn on Bluetooth on the Axon, press one front button on the remote to turn on, and then it would work.
Recently I updated from B20 to B27. Now the remote functions differently: I have to press the tiny pairing button on the back of the remote to connect. This is after already successfully pairing the remote and phone. Each time I come back to my car I have to again press this tiny button, which requires dismounting of the remote from the steering wheel and a tiny tool to press the button. I'm not re-pairing the devices (pressing the remote pairing button for 5 seconds), just reconnecting them when returning to my car.
Anyone know if there were changes in the Bluetooth protocol/software from B20 to B27? Know of a fix for this issue?
(Remote still functions fine with my old Nexus 5)
Thanks

dont know but my bluetooth in car doesnt display tracks anymore after update
Sent from my ZTE A2017U using Tapatalk

I have the latest update 029 on my new Axon 7 Limited Edition and I'm not getting any metadata displayed on the head unit any more. It works fine with my old Samsung Galaxy Note 2 from 2012. ZTE has Bluetooth issues and if the upcoming Jan Nougat update doesn't fix them, I'm getting rid of this phone. I "upgraded" to get a better Android Phone experience, not a worse one!

When streaming bluetooth audio in my Nissan Qashqai 2016 on the factory head unit, there is a delayed response when skipping track forward and back. The problems is intermittent with delays sometimes being a few seconds after pressing track forward, to minutes to several songs later.
Most recent firmware update to XTE AX7 2/may/2017 did nothing to fix the issue.
Android 7.1.1
Build No. A2017UV1.10B25

Related

[Q] Bluetooth, Car stereo, track names not appearing

Hi,
I have recently switched from an S4 with 4.4.2 installed to the new note 4. When connecting to my car stereo with the S4 via bluetooth the track names of songs playing in the music app and pandora would show up on the deck.
On the Note 4 i have no issues connecting to the deck but now theres no track names.
Is this to do with android 4.4.4?
Any ways to fix this?
Thanks in advance.
Seems to be so many variables in getting this to work. Always had problems with my Note 2... Works perfectly with Note 4 and Ford Mytouch Sync.
Try deleting the pairing on both sides and recreate it.
I thought i tried that but ill give it another go.
No one else have this issue or can say it definitely works with pioneer car stereos?
rcobourn said:
Seems to be so many variables in getting this to work. Always had problems with my Note 2... Works perfectly with Note 4 and Ford Mytouch Sync.
Try deleting the pairing on both sides and recreate it.
Click to expand...
Click to collapse
Didnt work
my pioneer head unit was the same, also i couldn't control it with the head unit.
I ended up updating the firmware on the head unit and it solved the problem, check to see if there is a firmware update for your headunit.
audiobookman said:
my pioneer head unit was the same, also i couldn't control it with the head unit.
I ended up updating the firmware on the head unit and it solved the problem, check to see if there is a firmware update for your headunit.
Click to expand...
Click to collapse
None that i can find for my unit. Funny thing is it works perfectly except for the track names. i can control the music app and pandora.
ghampton10 said:
Hi,
I have recently switched from an S4 with 4.4.2 installed to the new note 4. When connecting to my car stereo with the S4 via bluetooth the track names of songs playing in the music app and pandora would show up on the deck.
On the Note 4 i have no issues connecting to the deck but now theres no track names.
Is this to do with android 4.4.4?
Any ways to fix this?
Thanks in advance.
Click to expand...
Click to collapse
The problem is actually with the car stereo. It probably still runs Bluetooth 1.2 or something. I have the same problem in my 2012 Mazda 3. It has a dated Bluetooth. All I see is BT Audio, however it works fine on Ford sync and cars with more recent BT versions.
I have... inconsistent performance with this. If I am using the Play Music radio functionality, everything seems to work well. If I'm playing through an album though, it seems to get "stuck" on the first track played. The track duration updates but the track name does not. Pausing and resuming will get it to update.
With the same car and my Nexus 5 running the same Play Music version I do not run into this issue.
I've got a 2012 Honda Civic EX with the factory iMid (not navigation) system.
Was using an HTC Evo 4g LTE with a custom 4.4.3 ROM and was able to get track names and control music from steering wheel and connected via bluetooth.
Got Note 4 and lost abilty to see track names / artist info. I can still control the phone via steering wheel.
Unfortunately, Honda issues no updates for my factory stereo. If I go 3rd party unit, I loose steering wheel and bluetooth integration with the onboard mic, etc.
I am hoping that Lollipop will correct some of these things or that Samsung will issue a fix. I've seen a lot of posts around the web where people are having the same issue: prior phone worked fine. New note 4 phone lost track names. This was affecting lots of car manufacturers, factory stereos, 3rd party stereos, etc. Hard to narrow it down to one issue, other than all new notes having a new BT stack.
Just throwing my experience in the mix.
Dannon
dlitwin,
Take your car to Honda, some Civics/Accords/CR-V, etc have an update for the Handsfreelink module.
raptir said:
I have... inconsistent performance with this. If I am using the Play Music radio functionality, everything seems to work well. If I'm playing through an album though, it seems to get "stuck" on the first track played. The track duration updates but the track name does not. Pausing and resuming will get it to update.
With the same car and my Nexus 5 running the same Play Music version I do not run into this issue.
Click to expand...
Click to collapse
Well, a quick update here. My T-Mobile Note 4 received a system update yesterday, and after that the Bluetooth works as expected with my car.
mrnovanova said:
The problem is actually with the car stereo. It probably still runs Bluetooth 1.2 or something. I have the same problem in my 2012 Mazda 3. It has a dated Bluetooth. All I see is BT Audio, however it works fine on Ford sync and cars with more recent BT versions.
Click to expand...
Click to collapse
Not really a stereo problem if the thing that changed was the phone. It should be backwards compatible.
Hopefully theres an update in the works to make it come back. Its illegal here to touch your phone while driving and showing the track names on the deck helps with not having to touch it.
Might have to look at using NFC on my cradle to make the screen stay on, turn on bluetooth and connect the music app.
raptir said:
Well, a quick update here. My T-Mobile Note 4 received a system update yesterday, and after that the Bluetooth works as expected with my car.
Click to expand...
Click to collapse
Awesome! In australia we get updates late usually so maybe by the time you have lollipop ill get that update
Still nothing. I got an update but it didnt work. pandora has updated and no good.
Anyone found a fix?
First off I apologize for bringing up an old thread. I recently purchased the Pioneer DEH-4800BT head unit so that I could leverage the Bluetooth capabilities. Everything works great, with the exception of the unit reading my music library via Bluetooth. If I restart my Note 4 and then connect it via Bluetooth to the Pioneer head unit, it reads the library and allows me to browse my music as it should. However, if I turn off my vehicle thus disconnecting the Bluetooth connection, the unit will not read my library without me having to restart my Note 4. Has anyone ever encountered this? I have a feeling there is something on my Note 4 preventing the unit from reading the library a second time without restarting. Unfortunately hours of Google searches on this subject have left me with no solutions. What can I do to fix this? Thanks in advance!

Eonon Android 5.1.1 bluetooth issues & canbus issues

hi guys
new to the forum, hopefully someone will be able to help me
my unit has stock MTCC-KLD6-V2.97 Aug 02 2016 with a RK3188 and 1024x600 screen
Firstly the Bluetooth is not working, quite a lot of apps hang at the part where it try's to turn the BT on, especially one app i really need to work.
I honestly don't know what model of BT chip is installed in the head unit, apparently its BT 4.0 as listed on there website
I have been into the factory menu and changed the BT from WQ_BC6 to WQ_BC6B (as suggested somewhere in this forum) but it has made no change and the BT is still hanging at powering on.
Eonon have told me that the Bluetooth only work with devices that don't require a pin and the radar detector device i need to connect does not require a pin but still it does not work.
Not quite sure if eonon has set the setting wrong and i need to change it or i need to goto a custom rom or I need to pull the unit apart to find out.
Found someone else having trouble getting there ALPconnect app to work aswell on these units, in know ALPconnect wont work on older unit like the 4.4.4 as they only had BT 2.0 and the ALP BT only supports 4.0, but this android unit has 4.0 so it should not be a problem but it is.
sterod said:
The app I use, ALPConnect, does the exact same thing. Fortunately, the hardware on mine includes a hardwired speaker and GPS setup that work standalone. The benefit of the app was to get a nice big visual notification of a trap, as it would come into focus, duck the audio and play an alarm. It would also report the frequency of the radar and the type of laser hitting me. While I can get by without all that, I can't have the music blaring like I usually do, as the little speaker is only so loud and the Joying head unit doesn't have Mute Input wire to duck the audio.
While this is going slightly off topic, you may want to look into the AL Priority, it can interface with your V1 too and you will also gain laser protection. This thing has saved my a** countless times and paid for itself already many times over.
Click to expand...
Click to collapse
Secondly the control menu in the android head unit for accessing the cars buttons via cambus does not work, all steering wheels button seem to communicate back and work, but i cannot set my clock on my mazda 3.
Also have noticed that the radio wont mute when notification occur or when using other apps like google maps, no way to set the different volumes in this stock rom. Have played around with the factory menu volumes but it makes no diffidence.
Is it viable and worth changing to a different ROM, like Malaysk? or should i message eonon?
any help would be much appreciated
thanks
shane
I'm having exactly the same issue with a Pumpkin MTCC-KLD6-V2.91. (RK3188/1024x600)
The device I want to pair with appears in Bluetooth settings (with a phone icon?) but connecting to it does nothing. It's just a Bluetooth SPP device, like so many other devices.
Malaysk's ROM (from 7/25) doesn't change anything here.
Any suggestions would be most welcome.
-Zandr
zandrm said:
I'm having exactly the same issue with a Pumpkin MTCC-KLD6-V2.91. (RK3188/1024x600)
The device I want to pair with appears in Bluetooth settings (with a phone icon?) but connecting to it does nothing. It's just a Bluetooth SPP device, like so many other devices.
Malaysk's ROM (from 7/25) doesn't change anything here.
Any suggestions would be most welcome.
-Zandr
Click to expand...
Click to collapse
Waiting on a reply from Eonon, but initial news is not good.
Some serious BT issues in this model the MTCC
Anyone know if any Malaysk's Rom's avalable for the MTCC-KLD6-V2.91 that have no BT issues
I'm having the same issue, though my unit (MTCC KLD6) does not show any devices at all to pair with, and the car unit does not appear on my phone.
I'm wondering - if I take a usb BT dongle and attach it to the usb cable, would that work?
I think it might be another issue with your BT, it should connect to your phone at very least.
Have you had a look in your factory menu to see if the MCU has the Bluetooth option set?
Password for me was 126
Unfortunately the unit does not support external USB Bluetooth and probably never will, unless the manufacturer MTC/Klyde adds the required drivers to the unit or a Awesome developer by some stroke of luck here adds it to the unit. I doubt to see the feature in this unit
Sent from my iPhone using Tapatalk
Thanks for the reply. Yes, i checked to make sure Bluetooth was enabled in the system settings. I've tried a few of them (change setting, reboot, attempt pairing), i guess the next step is to try them all one by one to rule that out. I've sent an email to the seller to see if they have any ideas.
The vendor told me to connect the Key-1 & Key-2 wires from the canbus to the car, not sure why they'd think that would solve BT issues?
Did this fix the issue? I'm unable to see any Bluetooth devices and other Bluetooth devices don't see it.
Sorry to dig up an old thread
I have the Eonon GA2180a (android 10) - and having similar issues to here
I want to pair a bluetooth remote (read, steering wheel controls) to the head unit, but the bluetooth search just shows blank! I can connect to it using my phone but it appears some things are hidden to connect to with these android units? Looks like the bluetooth 'app' is the only way to connect too, theres nothing in the android settings to access a bluetooth menu or anything.
Did anyone get anywhere with this ?
cheers

Found an alternative way making SWC work in Spotify (BMW headunit)

Hi guys
I just bought a Android HU (PX6, Pie, for BMW E90 with 1280x480 display). I'm pretty impressed with the out-of-box functionality and possibilities you gain with this, but there are some little culprits.
I noticed that steering wheel controls (prev/next track) only work in MTC/builtin apps, but I wanted to have them control other media apps like Spotify. Since every attempt I tried through software didn't work (changing MCU settings, key remap apps, mymtcservice, mtce-utils, modify key config files), I was left with waiting till the software solutions get updated for PX6/Pie, or making an own CanBus to USB-HID-converter with an Arduino and others. While i may go that route someday (would love to use the iDrive controller in Android Auto), I found an alternative way/workaround to achieve what I want in the meantime.
What you need is a Creative BT-W2 adapter. It's a standalone bluetooth adapter which gets recognized as a USB audio card and also a HID device, since it supports AVRCP. I'm basically using this device as a AVRCP to USB-HID converter.
First you need to disable USB audio routing in Android developer settings. Then I connected this thing to an USB port of HU, and connected it also through bluetooth with HU. I did need several tries to pair them, since the device somehow doesn't show up in HU bluetooth settings, and it also states "not connected" while it is. After that SWC buttons already started working.
How does it work? SWC next track button pressed -> recognized by MTC bluetooth/music app -> sent through AVRCP to BT-W2 -> emulates USB-HID media key press -> gets recognized by Android system -> gets sent to the media app.
It may be a bit overkill ond also not that cheap, but if you only want working SWC in media apps without fiddling and stuff, this may be a useful way. Probably there are similar devices on Ali which do the same and are cheaper. Together with Automate to autoplay Spotify on boot and Android Auto in standalone mode I finally have a nice integrated Spotify setup in my car, without having to connect my phone.
Hope this helps anyone.
Hy
That sounds very interessting, i`m looking for a working "open" BT since long time.
what i don`t understand is, what do you mean by SWC ?
And with what do you control the spotify app then ? you have connected an external hardware ?
Chri

RESOLVED: Newbie to Android Car Head Unit

Good Day all. Hoping I could get some help with my new Android 9.1 inch head unit, version 10.1 (Model YJ9213AJ). I just installed the unit and have an issue with the CarPlay (usb dongle) which stops playing almost instantly when connected to Spotify and/or my songs on the iPhone. If I click play again it stops within a second. It also stops playing media files on my USB (local music) when it switches to the home screen, which it does on its own after playing music for approx a minute or two. I reset the system and unfortunately still have the same issue. Also on the bluetooth I get "please connect HFP first" too, maybe related IDK?.
Anyone have any suggestion on how I can try and fix these issues. Thank you in advance.
I had problems with android auto if bt was also trying to connect to the phone as an audio device. Disabled bt audio fixed it.
Then I just dumped android auto and went back to bt
Fixed it. Reset the unit and added apps one by one until the culprit was found. It was the CarPlay dongle app that caused the entire issue. Strange.

KingBeats K2 Plus — Firmware Update and wheel buttons

Hi guys!
I own a KINGBEATS K2 Plus with Android 11. Since I bought it in 2020 I didn’t get any update in the update section and the Android security updates are stuck at 2020, but says that the system is up to date.
Now, I doubt any new update didn’t come out, so I’d like to know if and how it is possible to update this head unit, plus I can’t get the “voice command” button on the steering wheel working as it is not recognized by the unit, either with the official app, or with the Carlink Kit adapter where I use CarPlay. Some buttons are recognized, some other are just not seen, like the voice command. Also, the answer and reject buttons on the sheen are seen but they open the Bluetooth system on the radio instead of the CarPlay with the CarlinKit system and when I try to set the buttons up during the button setup in the CarlinKit app, it just opens the Bluetooth app in the main head radio.
Can please someone help me?
Thanks so much!

Categories

Resources