Hi all,
I have a brand new Toyota car with Mirrorlink 1.0 but on the Note 4 I have version 1.1
Is it possible to "downgrade" the phone mirrorlink version to make it works with my new car?
Thank you in advance
Best Regards
Davide
another question:
are there Apps that (also with root if needed) can handle Mirrorlink version 1.0?
TheSgrash said:
Hi all,
I have a brand new Toyota car with Mirrorlink 1.0 but on the Note 4 I have version 1.1
Is it possible to "downgrade" the phone mirrorlink version to make it works with my new car?
Thank you in advance
Best Regards
Davide
Click to expand...
Click to collapse
I cannot understand what is your problem....
Mirrorlink 1.1. is compatible with older versions.. so you can have a Mirrorlink 1.1 phone and a 1.0 car without problems.
I also have the new version on my note 4 but it has no problems connecting to my WW with 1.0 version of mirrorlink
Probably you are suffering other problems not connected with ML versions....
umberto.sulla said:
I cannot understand what is your problem....
Mirrorlink 1.1. is compatible with older versions.. so you can have a Mirrorlink 1.1 phone and a 1.0 car without problems.
I also have the new version on my note 4 but it has no problems connecting to my WW with 1.0 version of mirrorlink
Probably you are suffering other problems not connected with ML versions....
Click to expand...
Click to collapse
I have Note 4 and am having problems connecting to Pioneer AVH-X5850BT through Appradio. Any hints are much appreciated.
Related
hi all,
i'd like to downgrade 4.3 to 4.2.2 because of conneting from ss note 3 with my car (SKODA SUPERB 2009) via bluetooth rSAP.
i only paired my phone with my car but when it tried to access sim card. it failed. i don't know how to fix it.
after some hours with google, i've read that it can be fixed by firmware 4.2.2. or with CyanogenMod ROM (but CyanogenMod not now support for note 3 - only trial)
thanks for all reply.
blackhat80 said:
hi all,
i'd like to downgrade 4.3 to 4.2.2 because of conneting from ss note 3 with my car (SKODA SUPERB 2009) via bluetooth rSAP.
i only paired my phone with my car but when it tried to access sim card. it failed. i don't know how to fix it.
after some hours with google, i've read that it can be fixed by firmware 4.2.2. or with CyanogenMod ROM (but CyanogenMod not now support for note 3 - only trial)
thanks for all reply.
Click to expand...
Click to collapse
Unfortunately there is no 4.2.2 firmware for Note 3. It was released already running 4.3.
You join on Sept, 2011 and this is your 1st post? Cool!
Are you spamming? They is no 4.2.2 ROM for Note 3 as it is officially release with 4.3
hey_joe said:
Unfortunately there is no 4.2.2 firmware for Note 3. It was released already running 4.3.
Click to expand...
Click to collapse
Thanks for reply. but what should i do to solve this issue.
blackhat80 said:
hi all,
i'd like to downgrade 4.3 to 4.2.2 because of conneting from ss note 3 with my car (SKODA SUPERB 2009) via bluetooth rSAP.
i only paired my phone with my car but when it tried to access sim card. it failed. i don't know how to fix it.
after some hours with google, i've read that it can be fixed by firmware 4.2.2. or with CyanogenMod ROM (but CyanogenMod not now support for note 3 - only trial)
thanks for all reply.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2595464
very stable cm rom been on it for 2 weeks
jaythenut said:
http://forum.xda-developers.com/showthread.php?t=2595464
very stable cm rom been on it for 2 weeks
Click to expand...
Click to collapse
this ROM already well support rSAP?
did you have any exp. on connetion via Bluetooth on VW or Skoda car?
blackhat80 said:
Thanks for reply. but what should i do to solve this issue.
Click to expand...
Click to collapse
Change the car. Note 3 is better than car
blackhat80 said:
this ROM already well support rSAP?
did you have any exp. on connetion via Bluetooth on VW or Skoda car?
Click to expand...
Click to collapse
bluetooth has been fine for me but dont have those cars only a lambo
I recently bought the AVIN Avant 2 Android head unit, but I can't seem to find reliable info on modding it. when I try to look up the MCU in settings, I come up with CA03-AL 0.1.50 NXP662x which looks nothing like the MCU versions I've seen posted here. Am I SOL on flashing a ROM/MCU for this head unit?
I am curious about this to.
Why on earth do you buy a old unit with a dual core cpu and jellybean os.
I got a quad core cpu and 2gb mem with kitkat (later it will be updated to Lollipop)
Waiting on Tommy to give me the download to the update -- he hasnt replied to emails.
I just picked one up and it have MCU Ver CA03-AL 0.1.13 NXP6624
But no idea what the latest build is -- Mine is running R4.0.0.0
Flemischguy said:
Why on earth do you buy a old unit with a dual core cpu and jellybean os.
I got a quad core cpu and 2gb mem with kitkat (later it will be updated to Lollipop)
Click to expand...
Click to collapse
Because it was made specifically for my car. No need to use an install kit. Plug it up, slide it in. Still, the hardware shouldn't have an impact on the ability to flash a new ROM.
But thanks for the informative post!
I got the updated ROM with root. But Everytime I try to mount system as r/W it reverts to read only.
I have a newer version of EasyConnected but due to signature mismatch I can't install it...
rattelmattias said:
I got the updated ROM with root. But Everytime I try to mount system as r/W it reverts to read only.
I have a newer version of EasyConnected but due to signature mismatch I can't install it...
Click to expand...
Click to collapse
where did you get the root from, I am looking since forever.
New avin bmw unit
I’ve just purchased the new avin unit for my BMW does any one have the mcu update?
Avin 8.8 headunit in e92
New here not sure if I'm posting correctly but I was wondering if anyone knew the correct audio settings with a bmw e92 and does anyone know the developer passcode...not the factory settings passcode...tia
Sent from my SM-N950U using Tapatalk
rattelmattias said:
I got the updated ROM with root. But Everytime I try to mount system as r/W it reverts to read only.
I have a newer version of EasyConnected but due to signature mismatch I can't install it...
Click to expand...
Click to collapse
Hey. Could I maybe get the software too?
Gesendet von meinem SM-G950F mit Tapatalk
Folks,
I have the XTRONS model PF82MTVA (8" VW model, upgraded to Android 4.4.4)
It is:
Full AOSP On MStar Cedric3
CPU Cortex-A9 dual core
Android version 4.4.4
MCU Version 4.3.10.1-1-10-610101
System version 2.9.5_20150413
DVD version 2.13.13-860mc
Decoding the MCU version gives me:
Version: 4.3.10.1
H/W revision: 1
Car model: VW
Features: RDS, Color, BC6
Tuner chip: TEF662X
Can I flash this to Android 5.1 with the Malaysk package? Which one?
Any suggestions welcome.
Thanks in advance.
Thanks
Bump
Anyone?
transparu said:
Anyone?
Click to expand...
Click to collapse
Any luck IM LOOKING FOR THE SAME? Where did you get your 4.4.4 update from, CHEERS
Folks, I have seen a couple of requests for more info re my Xtrons unit recently.
Sorry for this late reply but I am travelling in my van and at the moment have done almost 10, 000km in the past 4 weeks. Presently on the very west coast of WA.
Sorry, but I simply can't recall where I got the upgrade - though I can say it worked fine though when Xtrons folk tried to help with an unrelated issue the solution involved reinstalling the original Android version. Sorry. I will TRY to find where I got it when I'm home again.
I must tell you though that I had months of trouble with the unit leading up to the reinstalling of the original O/S. THAT did not solve the problem. In the end, when I had to put a new battery in the car and do some underbonnet work the battery was out for 2 days. When I put it back in the head unit worked fine!
In the subsequent 6 weeks there has been one "no boot" instance.
Through the months if issues, no variation of resetting changed things. Installing the original code didn't work. It was only totally powering down the unit that worked.
FWIW and for ?reference.
vwq47
Sent from my SM-G900I using Tapatalk
When I hook my S7 edge to my Ford I get message "no USB device connected". Does anyone know if there is a way to get Mirrorlink to work with the Ford SYNC system??
what version of ROm do you currently have on your phone ?
second is the software in your car u p to date ?
Reply
Cosmic Blue said:
what version of ROm do you currently have on your phone ?
second is the software in your car u p to date ?
Click to expand...
Click to collapse
I recently updated SYNC to 3.8 and I have a stock Galaxy S7 edge with Android ver. 7.0, Kernel ver. 3.18.31, Build # NRD90M.G935VVRU4BQA4.
WarvonDruid said:
I recently updated SYNC to 3.8 and I have a stock Galaxy S7 edge with Android ver. 7.0, Kernel ver. 3.18.31, Build # NRD90M.G935VVRU4BQA4.
Click to expand...
Click to collapse
Hey,
SYNC2 (MFT) doesnt support screen mirroring.
Only SYNC 3 (android) supports it, its latest version is i guess 2.2
3.8 is for SYNC2 (windows) is what you might be having.
I have Sync 3 and can't get it to mirror
bevinabraham said:
Hey,
SYNC2 (MFT) doesnt support screen mirroring.
Only SYNC 3 (android) supports it, its latest version is i guess 2.2
3.8 is for SYNC2 (windows) is what you might be having.
Click to expand...
Click to collapse
I have 2017 Sync 3 updated to latest version in my new truck and Galaxy S7 Edge (Verizon)build NRD90M.G935VVRSBQC9 hardware rev .7. Kernel 3.18.31. How do I get screen mirroring to work?
Hello,
In May 2020 I bought this head unit from ali express:
Junsun V1
Android 9
4GB + 64GB
Wifi + 4G dongle
1024x600
With Apple Carplay (Z-Link)
CPU:
Intel X86_Octa-Core 1.8GHz [email protected]
Build-number:
OPM2.171019.012 release-keys
MCU Version:
2019.12.24 13:48:27 NOR_53_L82_G23P48F64_V:1.0_FYT
Now I would like to update this head unit to Android 10, but I can't find any firmware or even identify the kind of device this is to search firmware for it. I asked Junsun, since they are now selling the device with Android 10 pre-installed, but they say it will not work on my device since the hardware changed.... :/
Is there anyone that can help and tell me how to upgrade my head unit to android 10, if this is possible?
Thank you.
+1 I love this radio but look the message :
hi friend I’m sorry that the version you purchased is no longer on sale. Its chip is different from the radio chip we sell now. Therefore, we do not have the appropriate documents for you to update. Moreover, It's not suggested to refresh firmware if the device works well, the radio may stop working if refreshing firmware doesn't succeed. Hope you can understand
Click to expand...
Click to collapse