TWRP broke my phone when i formatted internal memory !! - Samsung Galaxy Core Prime Questions & Answers

hello,
i have made a format to the internal memory through TWRP.
it lasted for an hour. and hanged .
twrp open but it gives me unable to mount storage and data .
i just want it to work again . what should i do ?
my phone is : SM-G360H
ROM were CM 13
thanks

i hope to know what is the use of the recovery now, applying it keep giving errors .

AbdoRefky said:
hello,
i have made a format to the internal memory through TWRP.
it lasted for an hour. and hanged .
twrp open but it gives me unable to mount storage and data .
i just want it to work again . what should i do ?
my phone is : SM-G360H
ROM were CM 13
thanks
Click to expand...
Click to collapse
Try flashing stock using odin
It might help

@[email protected]
Thanks for helping .
the phone installed the new Stock , but it just stop at second samsung screen logo

i will try the second stock from this link .
http://firmwarefile.com/samsung-sm-g360h

system size is 1162 MB
Cach is 192 MB
Data = 0 MB
Internal storage = invalid partition selection . and 0 MB

woooow, i finally made it .
after 7 hours of believing that i lost my phone .
its like you said + factory setting was able to format the data folder
https://androidmtk.com/flash-samsung-stock-rom-using-odin
now i go try to install gapps .
TY very much

Related

[STUCK] After Partitioning SD Card

Well, i got mine sd formating for like 15-20 minutes,still stuck.
After waiting,i removed battery to force a shutdown. Result : Lost the 512MB that would be partitioned.
Today i decided to try again.
Just tried it again, it took me like 2 minutes for it to complete.
But i'm stuck at bootscreen for like 10 minutes. Whats happening ?
I formated,and then i hit : Reboot on CMW Recovery.
Any Idea ? Anyone ? : )
I partitioned it because i was having "Not enough internal space memory" error.
And i have like,10 apps installed only,no game,only light apps.
marcelloLins said:
Well, i got mine sd formating for like 15-20 minutes,still stuck.
After waiting,i removed battery to force a shutdown. Result : Lost the 512MB that would be partitioned.
Today i decided to try again.
Just tried it again, it took me like 2 minutes for it to complete.
But i'm stuck at bootscreen for like 10 minutes. Whats happening ?
I formated,and then i hit : Reboot on CMW Recovery.
Any Idea ? Anyone ? : )
I partitioned it because i was having "Not enough internal space memory" error.
And i have like,10 apps installed only,no game,only light apps.
Click to expand...
Click to collapse
After partitioning did u try wiping the data from CWM?
mrn123 said:
After partitioning did u try wiping the data from CWM?
Click to expand...
Click to collapse
I missed that,Thanks.
What i did :
1 - Removed SD
2 - Booted normaly
3 - Inserted SD
4 - Booted into recovery mode
5 - Wiped Data
6 - Reboot.
Worked.
Thanks a bunch
Question : How do i set my apps to get saved into that partition i made instead of at the phone's internal memory ? - SOLVED !
marcelloLins said:
I missed that,Thanks.
What i did :
1 - Removed SD
2 - Booted normaly
3 - Inserted SD
4 - Booted into recovery mode
5 - Wiped Data
6 - Reboot.
Worked.
Thanks a bunch
Question : How do i set my apps to get saved into that partition i made instead of at the phone's internal memory ? - SOLVED !
Click to expand...
Click to collapse
First of all i guess that you have made a backup of the apps using Titanium backup. Before restoring the apps, just change the default install memory location of the Titanium backup to internal. Through this way the apps would be saved to the EXT4 partition you created!
If you finish process of partition succcesfully, after you install some applications, it install on sd card simply
If you are installing applications from market then its not needed to change the default memory location...but if you are restoring applications from titanium backup, you have to change the default memory location in the settings!
Sent from my GT-I5800 using XDA App
just partitioned my sd ... but cant find "default install location" in titanium pro...
Goto preferences--restoration settings--restore backups to
Sent from my GT-I5800 using XDA App

[Q] Totally bricked :/ need help by developers and all

Dear xda and Users,
I wanted to increase the installation storage while i was using GB 2.3 official then updated to DZO aurora ics rom.
I used partition from xda threads and kept official partition file also as back up everything worked well in dzo aurora then i felt i need to do it in GB 2.3 and try without doing the official partition in CWM.
I put DLOAD folder with official GB 2.3 and did an update with pressing + and - with power button. The update fails every time and all i can get is the android system recovery <3e> i do not even get a usb folder pop up in windows on the pink screen.
I cant even install or run any zips of rom because signature verification fails :'(
PLEASE HELP ME " i see a option apply update from sd and i dont have any signed files to do it please help me "
Note - i cant acces the phone to use clock work mode or pink screen then a connect usb to pc and a folder popup please dont give me <--- this solutions and i read so many threads and i dint get anything like mine "
Munchkinrussel said:
Dear xda and Users,
I wanted to increase the installation storage while i was using GB 2.3 official then updated to DZO aurora ics rom.
I used partition from xda threads and kept official partition file also as back up everything worked well in dzo aurora then i felt i need to do it in GB 2.3 and try without doing the official partition in CWM.
I put DLOAD folder with official GB 2.3 and did an update with pressing + and - with power button. The update fails every time and all i can get is the android system recovery <3e> i do not even get a usb folder pop up in windows on the pink screen.
I cant even install or run any zips of rom because signature verification fails :'(
PLEASE HELP ME " i see a option apply update from sd and i dont have any signed files to do it please help me "
Note - i cant acces the phone to use clock work mode or pink screen then a connect usb to pc and a folder popup please dont give me <--- this solutions and i read so many threads and i dint get anything like mine "
Click to expand...
Click to collapse
clear wipe data and cache in android system recovery.
and reboot
http://forum.xda-developers.com/sitesearch.php?q=brick%20u8800
Did both but no use
nikosddesign said:
clear wipe data and cache in android system recovery.
and reboot
Click to expand...
Click to collapse
I did wipe data factory reset no use
i install the dload again ( update failed ) and this time i did both wipe data factory and wipe cache partition and No use
Please mention what are the signed files i can use in order to run " apply update from SD card "
Note i get the following when i do wipe data / factory reset
--wiping data...
formatting /cache...
E:failed to mount /data_pseudo ( no such file or directory )
E:failed to mount /data_pseudo ( no such file or directory )
formatting /data..
E:format_volume make _extf4fs failed on /dev/blocl/mmcblk0p13
E:failed to mount /data_pseudo ( no such file or directory )
E:failed to mount /data_pseudo ( no such file or directory )
Formating /HWuserData...
error opening disk files ( no such file or directory ) wipe internal sdcard fail
formatting /cahce
data wipe complete
i think it because the old custom partition was left and i dint have any chance to repartition it ( is ther a way to hard flash the phone and start all over please if yes guide me )
here http://forum.xda-developers.com/showthread.php?t=1728065
and here read carefoully http://forum.xda-developers.com/showthread.php?t=1560372&highlight=update+fail+on+step+2+of+2
flash this first have unlock pink screen http://www.mediafire.com/?nzygor314l4fk5u
flash this http://www.mediafire.com/?1hbk6n46hgamyt6
sorry my bad english.
thanks to you but i am not finished yet help plz
i checked all the links you gave and i found that i can do all this only if i have a rom installed in my system but my update failed and its like nothing is inside my mobile and partition is messed up and i am confused how will i flash this file ?
----------------------------------->flash this first have unlock pink screen ( the file you gave sorry cant post links me newbie )
1.i put the file sdcard / Dload then press + and - with powerbutton<--------------------------------> starts unpacking and update fails
but i get pink screen and image folder opens in windows
thank you so much for this help hugs and the problem is i cant partition it properly for installing a zip properly
i installed the u8800 official partition by geno but it doesn't take any effect after reboot .. my system partition is still messed up
please guide me what i do next do you have any partiton file which will take effect the moment i install its zip in clockwork mode
because when ever i run a rom zip after reboot it hangs on the rom logo not ( huawei logo )
and thank you again sir for the unlocking pinkscreen usb
Edit - when i try to do mount and storage in clockwork mode
format cache is ok
format system is ok
but when i format Data i get
E:format_volume: make_extf4fs failed on /dev/block/mmcbl0p13
error formating data
( i think my internal storage is messed up partition may be messeed up and thus no zip roms run after install all get stuck in logo )
It seems that you /data partition is damaged. You can try to format it from a linux machine. If you connect the device in pink screen mode on a linux system, you can see and other partitions(I think /data included). Then maybe you can format it from gparted for e.g)
dancer_69 said:
It seems that you /data partition is damaged. You can try to format it from a linux machine. If you connect the device in pink screen mode on a linux system, you can see and other partitions(I think /data included). Then maybe you can format it from gparted for e.g)
Click to expand...
Click to collapse
If you have pink screen you could make a restore from the full flash.bin, there is a tutorial in a thread on this forum, i unbricked mine this way.
Good Luck
I will try and get back to you all
i will try the linux full flash and let you all know if i was successful
EDIT- thanks for all the support i finally got it working back with the huawei full flasher in linux mode thank you so much

Q & T for Pixeldroid JB 4.2.2 AOKP & CARBON 720p/HW/Sound/NOS

if you have questions or problems with rom
post them here not in the rom thread
failure to add the info below will result in your question not being answered untill you add the below info to your post
when posting about a problem please include which install you used [nand, dataonext or nativesd]
which bootloader you are using [clk or magldr]
and what partition size you used if its a nand or dataonext install
and any relevant information you can think of ::: for instance..[i installed poweramp and my problem started
this is a small tutorial on how i flash this rom
first off i have a 430 system partiton and a 4 gig ext 4 partition
i also use Kokotas black clk 1.5.1.9 and CWM Recovery Touch Beta 8 Release Candidate 1
and i use the dataonext install method
first thing i do is do a backup of the rom i have on my phone
then i move the rom zip to my sdcard
i then go into mounts and storage and
format boot
format cache
format data
format system
format sd-ext
be carefull not to format sdcard
i then got into install zip from sd card then choose zip from sdcard
then i pick the rom zip and and go thru the setup on aroma and choose the things i want to install
when it finishes i reboot and let it sit at the lockscreen for 5 minutes
then i go thru the setup and add my gmail account
when its done with the setup stuff i once again let the phone sit for 5 minutes
then i reboot one more time and begin fully setting up the phone the way i like it
i add alot of modded stuff to my phone for testing and regular use
and the way i posted above has never failed me
link for CWM Recovery Touch Beta 8 Release Candidate 1
http://forum.xda-developers.com/showthread.php?t=1419733
link to kokotas blk clk
http://www.mediafire.com/?tzg7whl9wwaih
Hi Pixeldroid.
It is an awesome rom again. But I have again huge battery drain. And I saw that most is due to Google Services. Now my battery is in 5 Hours from 100% full to 25% empty. Google services is taking 42% of battery drain. Is it possible to shutdown Google services? I have allready did the following: Settings/ Accounts/ Google/ Accounts Sync OFF.
I found where to stop Google services, but I don't know if it wil give me problems with the rom.
Settings/ Apps/Active now/ Google services
I have stopped them all and wil see what happens.
re
Kajoe said:
Hi Pixeldroid.
It is an awesome rom again. But I have again huge battery drain. And I saw that most is due to Google Services. Now my battery is in 5 Hours from 100% full to 25% empty. Google services is taking 42% of battery drain. Is it possible to shutdown Google services? I have allready did the following: Settings/ Accounts/ Google/ Accounts Sync OFF.
I found where to stop Google services, but I don't know if it wil give me problems with the rom.
Settings/ Apps/Active now/ Google services
I have stopped them all and wil see what happens.
Click to expand...
Click to collapse
for me is the battery drain good. have you change the display settings?
pixelfreak
thanks for great job
Navitel V 5 works with this ver of rom ?
very nice rom
cheers!
Hello to all
I am on Data on ext .My sd(class6 samsung) is an 2gb ext3 and 14gb fat 32 ( formatet with touch recovery,also tryed with ext4 made with minitool partition wizard same issue came))
I also use clk 1,5,0 rc1
My layout is big enough i think.
recovery 7mb
misc 3 mb
boot 7 mb
system 370 mb
cache 7 mb
userdata 27 mb
If i put in my sim card always after pin the message apperars "com.android.phone" stopped and i have to write my pin again.
I can not use my phone. Every 5 seconds this message appears.
Can you please help me?
sincerealy
Mr.NeoTrinity said:
Hello to all
I am on Data on ext .My sd(class6 samsung) is an 2gb ext3 and 14gb fat 32 ( formatet with touch recovery,also tryed with ext4 made with minitool partition wizard same issue came))
I also use clk 1,5,0 rc1
My layout is big enough i think.
recovery 7mb
misc 3 mb
boot 7 mb
system 370 mb
cache 7 mb
userdata 27 mb
If i put in my sim card always after pin the message apperars "com.android.phone" stopped and i have to write my pin again.
I can not use my phone. Every 5 seconds this message appears.
Can you please help me?
sincerealy
Click to expand...
Click to collapse
where did you come up with userdata 27 mb
Kameirus said:
where did you come up with userdata 27 mb
Click to expand...
Click to collapse
Hello Kameirus
First ,thanks for replying )
I dont know where the 27 mb of userdata came from??
In the clk 1.5.0.1 there is no option under settings to change that. I only have the options
recovery ,misc,boot,cache and system.
sincerealy )
Mr.NeoTrinity said:
Hello Kameirus
First ,thanks for replying )
I dont know where the 27 mb of userdata came from??
In the clk 1.5.0.1 there is no option under settings to change that. I only have the options
recovery ,misc,boot,cache and system.
sincerealy )
Click to expand...
Click to collapse
how did you install clk on your phone
do you have a tmobile hd2 if yes can you bump up the system partition size to 400 or 410 and see what happens
i always use a 410 size
Kameirus said:
how did you install clk on your phone
do you have a tmobile hd2 if yes can you bump up the system partition size to 400 or 410 and see what happens
i always use a 410 size
Click to expand...
Click to collapse
Hello )
I did the clk install via an custom .ruu .
I am honest. I forgott what kind it is. Its so long ago that i changed from wimo 6.5 to android. About 3 years.
I can say two things about it. It is an German one and the original vodafone rom is not allow when i try to install it.
So the chance is well to an Tmobile phone.
Sorry for my bad englisg. I will try my best.
sincerealy
Thanks of course for reply !
re
Mr.NeoTrinity said:
Hello Kameirus
First ,thanks for replying )
I dont know where the 27 mb of userdata came from??
In the clk 1.5.0.1 there is no option under settings to change that. I only have the options
recovery ,misc,boot,cache and system.
sincerealy )
Click to expand...
Click to collapse
make your phone comlete new with the tools from my first post.
- new HSPL
- new bootloader with recovery and cache
it may be that you have an outdated version of HSPL on your phone. or have you ever been something changed on your phone? sorry i did not read all your posts
pixelfreak
-pixelfreak- said:
make your phone comlete new with the tools from my first post.
- new HSPL
- new bootloader with recovery and cache
it may be that you have an outdated version of HSPL on your phone. or have you ever been something changed on your phone? sorry i did not read all your posts
pixelfreak
Click to expand...
Click to collapse
Hello
hanks for helping.
I tryed with hspl 2.08 and 3.03. I always used since release the clk 1.5.0.1 rc1.
With "the tools from your post " ,do you mean the hd2 toolkit or something else?
sincerealy
re
Mr.NeoTrinity said:
Hello
hanks for helping.
I tryed with hspl 2.08 and 3.03. I always used since release the clk 1.5.0.1 rc1.
With "the tools from your post " ,do you mean the hd2 toolkit or something else?
sincerealy
Click to expand...
Click to collapse
yes. i work only with the HD2 Toolkit and MiniToolPartition Wizard Home Edition and i have no problem.
make for me a step by step list from your install and your sizes from recovery and cache. write me all your settings in the install tools
pixelfreak
-pixelfreak- said:
yes. i work only with the HD2 Toolkit and MiniToolPartition Wizard Home Edition and i have no problem.
make for me a step by step list from your install and your sizes from recovery and cache. write me all your settings in the install tools
pixelfreak
Click to expand...
Click to collapse
Hello
Yes of course.
1 task 29
2 flash custom.ruu (the clk 1.5.0.1rc1
3 Make Partitions like below
recovery 7mb
misc 3 mb
boot 7 mb
system 370 mb
cache 7 mb
userdata 27 mb ( i cant change that value anywhere)
4 boot into cwm
5 format boot,cache,system and ext partition
6 switch off
7 put in sd 16 gb (11,5gb fat32 cluster default,2.5gb ext4/ext3 tested with both,290 swap all the things done with partition tool wizard)
8 flash rom
9 wipe dalvik cache ( also tested with wipe of dalvik cache and cache.
10 reboot with insert sim
11 com.android.phone unfortunatelly stopped
sorry for my english. feel free to correct me.i am willing to learn
sincereally )
re
Mr.NeoTrinity said:
Hello
Yes of course.
1 task 29
2 flash custom.ruu (the clk 1.5.0.1rc1
3 Make Partitions like below
recovery 7mb
misc 3 mb
boot 7 mb
system 370 mb
cache 7 mb
userdata 27 mb ( i cant change that value anywhere)
4 boot into cwm
5 format boot,cache,system and ext partition
6 switch off
7 put in sd 16 gb (11,5gb fat32 cluster default,2.5gb ext4/ext3 tested with both,290 swap all the things done with partition tool wizard)
8 flash rom
9 wipe dalvik cache ( also tested with wipe of dalvik cache and cache.
10 reboot with insert sim
11 com.android.phone unfortunatelly stopped
sorry for my english. feel free to correct me.i am willing to learn
sincereally )
Click to expand...
Click to collapse
1 task 29 / thats okay if you make with HD2 TOOL
2 flash custom.ruu (the clk 1.5.0.1rc1 / this is not okay.please install your bootloader with HD2 TOOL
3 Make Partitions like below
recovery 7mb / this size is not from HD2 TOOLKIT
misc 3 mb / this size is not from HD2 TOOLKIT
boot 7 mb / this size is not from HD2 TOOLKIT
system 370 mb / with HD2 TOOLKIT for EU=360MB and for TmoUS=410MB
cache 7 mb / with HD2 TOOLKIT 5MB
userdata 27 mb ( i cant change that value anywhere) / this size is not from HD2 TOOLKIT
4 boot into cwm
5 format boot,cache,system and ext partition / your phone is clean and you must not format
6 switch off
7 put in sd 16 gb (11,5gb fat32 cluster default,2.5gb ext4/ext3 tested with both,290 swap all the things done with partition tool wizard) /EXT4 with cluster default?
8 flash rom
9 wipe dalvik cache ( also tested with wipe of dalvik cache and cache.
10 reboot with insert sim
11 com.android.phone unfortunatelly stopped / this is a sign for not enough space
pixelfreak
Apps problem
Hi,
I installed, this rom Nand + data OnExt, and in some application, like Facebook (from market), if i get i want to see one group, for example, the app close down (black and out). App like, Airdroid, if i go to setting he shuts down. and others apps, like dolphin, or the default browser.. :\
What i can see, seems that when is "processing" the programs close down.
Sorry for my bad English, i wish you can understand the problem.
Edit: Clk instaltion with 2 GB EXT4 cluster default / SWAP 256 MB / the rest FAT32 cluster default , Sandisk , 8gb , class uhc
re
kakashiii said:
Hi,
I installed, this rom Nand + data OnExt, and in some application, like Facebook (from market), if i get i want to see one group, for example, the app close down (black and out). App like, Airdroid, if i go to setting he shuts down. and others apps, like dolphin, or the default browser.. :\
What i can see, seems that when is "processing" the programs close down.
Sorry for my bad English, i wish you can understand the problem.
Edit: Clk instaltion with 2 GB EXT4 cluster default / SWAP 256 MB / the rest FAT32 cluster default , Sandisk , 8gb , class uhc
Click to expand...
Click to collapse
what is the size from your recovery and cache? EXT4?
pixelfreak
Quote:
Originally Posted by kakashiii
Hi,
I installed, this rom Nand + data OnExt, and in some application, like Facebook (from market), if i get i want to see one group, for example, the app close down (black and out). App like, Airdroid, if i go to setting he shuts down. and others apps, like dolphin, or the default browser.. :\
What i can see, seems that when is "processing" the programs close down.
Sorry for my bad English, i wish you can understand the problem.
Edit: Clk instaltion with 2 GB EXT4 cluster default / SWAP 256 MB / the rest FAT32 cluster default , Sandisk , 8gb , class uhc
what is the size from your recovery and cache? EXT4?
pixelfreak
Click to expand...
Click to collapse
hi, the size that you say "install Recovery with 360 MB System and 5 MB Cache" , clk , 360 , 5mb. And the sd, formated with partition wizard. ext 4, 2gb
-pixelfreak- said:
what is the size from your recovery and cache? EXT4?
pixelfreak
Click to expand...
Click to collapse
hi, the size that you say "install Recovery with 360 MB System and 5 MB Cache" , clk , 360 , 5mb. And the sd, formated with partition wizard. ext 4, 2gb

Link2sd cannot mount-invalid argument

Hey
so i spent the last 20 hours trying to fix this problem but couldn't .
My problem is when i try to mount the 2nd partition , the annoying message pops " cannot mount-invalid argument "
I literally tried every solution, i tried to do via minitool , easeus,
tried all ext2,3,4 fat16,32 formats for the second partition , of course i set the first one as fat 32 .
i even tried to flash the recovery and it deleted everything and did everything again but samething .
i have an s3 i747m with cwm 6.0.4.7
i bought the pro version of link2sd.
i have a 64 gb sd card .
i tried to give 2 gb. 12 gb , 1 gb. to the second partition but same thing .
I'd greatly appreciate your help

System Storage - More than 7Gb -

I m new to this genre of rooting and installing ROMs so u might find the descriptive part of my problem a bit absurd and amusing to pro's out here - so please bare with me. Thanks.
I have Custom Flash software (Philz Touch 6.26.6) installed on my Samsung Galaxy S5 SM-900I. I installed " PopWiz_Telstra_v5.1_FINAL_G928FUVU2DOH6_G928FTMB2DOH6_TMB " from the community to get the S6 outlook + A few Note5 apps .
1. I used Wipe Data/Factory Reset, and then selected Clean to install A new ROM
2. I m not sure if that completely wiped data off my phone except the Custom Flash software or not
3. Thinking of the above , i installed PopWiz_Telstra_v5.1_FINAL version and proceeded .
4. I checked the storage and it shows 7.4Gb
5. Somewhere i am not doing things correctly as i have a 16Gb variant and 7.5Gb is used up in system files
Can anyone tell me how can i wipe data completely except my Flash Software , and make maximum use of my Internal Memory because as far as i know , at max system files should be of 4Gb , even that should leave me with 12Gb appx .
Please help me fix this guys
Anyone for this?
Flash TWRP recovery instead of Phillz
There is no issue it's normal , the system take too much place and you have about 9gb free. You can flash stock and check , its almost the same thing
Sent from my SM-T116 using XDA Free mobile app
delete - got ROM names confused
*Detection* said:
I'm running PopWiz, and it shows 4.85GB used / 11.84GB
And that's after installing a load of apps, and having stuff saved like videos and images etc
Click to expand...
Click to collapse
You running popwiz ? oooh come in MP i need youuu
Sent from my SM-G900F using XDA Free mobile app
u have stuff stored in your sdcard from before instaling your new rom, go into custom format option and format sdcard if you have nothing important on your phone that worth keeping.format sdcard not sdcard1

Categories

Resources