Related
This is merely a guide, I do not take credit for any methods or apps listed below. I am not a developer. The great people working on these apps and methods deserve all the credit and your donations, so please disparse accordingly.
BIG THANKS to @iKrYpToNiTe, @jcase, @geohot who worked on these apps. Also thanks to @mschumacher69 for some constructive discussions.
YOU AGREE BY PERFORMING ANY OF THE ACTIONS BELOW THAT I AM NOT RESPONSIBLE IF YOU BRICK YOUR PHONE. EVERY DISCLAIMER STATED ON THE LINKS PROVIDED IS STILL 100% VALID.
A RECAP OF THOSE DISCLAIMERS IS THAT YOU WILL VOID YOUR PHONE'S WARRANTY AND NOONE ELSE BUT YOURSELF ARE RESPONSIBLE IF YOU DAMAGE YOUR PHONE!!!
I decided to compile a root guide for the Cricket variant of the Moto G falcon xt1032 running 4.4.2 (may work on other variants as well, not sure). I obtained full, permanent root with philz touch recovery (but it would work for any other recovery you may choose to use).
THIS METHOD DOES NOT REQUIRE A COMPUTER/PC/MAC/LINUX USB CONNECTION
1. Enable USB debugging
2. From the setting tab "security". Check the " unknown sources" box, so you can install apk outside of play store
3. In addition to all things below, you will need a file explorer. I find es file explorer to be the golden standard, but your preferred file manager will do
4. This Link below is for you to install towelpieroot.apk
http://forum.xda-developers.com/moto-x/themes-apps/root-towelpieroot-motorola-devices-t2825059.
The version 1.2 supports the xt1032 falcon. Big thanks to @iKrYpToNiTe for adding support for the Moto G! You will need this temporary or "tethered" root before you go to the next step, which is unlocking the bootloader with this app called Sunshine (link to thread given below). Towelpieroot is buggy at times, but if it doesn't work the first time, try a few more. It WILL work.
5. http://theroot.ninja/
Note that running Sunshine is not free, but the $25 is well spent! Just so you know, Sunshine will NOT charge you if the process fails.
6. After the bootloader is unlocked, UNINSTALL towelpieroot. This is important in order for you to proceed to the next step.
7. Once you unlock the bootloader, you need to run towelroot (link below)
https://towelroot.com/
This step will grant you full, permanent root. Tap on the "welcome to towel root V3" three times, then you should see a box where you can modify the modstring. By experimentation and trial, I found the modstring 1337 0 0 0 4 0 to be the one. Click "Make it ra1n" and you should have permanent, full root privileges!!!
8. Download your favorite root checker to verify root access!
9. Go to play store and install SuperSU, and do any necessary updates.
10. Go to play store and install busybox and do all necessary binary updates.
11. Go to play store and download a terminal emulator. This will aid you in flashing your recovery.
12. My personal preference is Philz Touch recovery, but I think it it fair to assume that any compatible recovery of your choice is appropriate to flash with this method (link below)
http://forum.xda-developers.com/showthread.php?t=2639583
Download the latest .IMG from the OP
13. Before you flash you may want to back up your stock recovery.
Open the terminal emulator.
(do not include quote marks, only what's inside them, including spaces)
Type "su" and hit the ENTER key
This will get you superuser access
Type "dd=if/dev/block/mmcblk0p32 of=/sdcard/stock-recovery-backup.img"
This will create a backup of your current STOCK recovery.
14. Now ,using your file manager, go to the philz touch recovery .img file you just downloaded and rename it into "recovery.img", then move it to the sdcard folder (storage root folder)
Note: there you should also see the backup recovery file "stock-recovery-backup.img" you just created
15. Open the terminal emulator
Type "su" to gain superuser access
Type "dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p32
16. THAT'S IT!!!
Verify by powering off your phone, hold volume down and power button for 5 seconds, select recovery and you should have Philz touch recovery in your phone.
NEXT LOGICAL STEP WOULD BE TO BACKUP YOUR STOCK FIRMWARE IMMEDIATELY!
BE MINDFUL WHEN YOU HOP BETWEEN ROMS THIS PHONE HAS ONLY AN INTERNAL STORAGE, SO BE CAREFUL WHAT YOU FORMAT
Other than that, whoohoo!!!!
NOTE: ACCORDING TO SOME DEVS I HAVE COME ACROSS ARE TELLING ME STEP 7 IS NOT NECESSARY. YOU CAN TRY SKIPPING IT. UNFORTUNATELY MY BOOTLOADER AND ROOT ARE IN EFFECT, THEREFORE I CANNOT VERIFY THIS. YOU COULD TRY[emoji3]
Please, when you need app-specific support, you may get better answers in the respective forums, but don't be discouraged posting questions here. It took me great effort finding a way to root without a PC, and although i am not a developer, I have stumbled in enough obstacles to be of some assistance
XT 1032 Falcon from Cricket GSM 4.4.2 stock
Once you unlock ur bootloader, u don't need exploit apps such as towelroot to gain root, all you need is a custom recovery such as twrp. Once you flash it and reboot from it, it will tell you that you're not rooted, do u want to flash supersu to gain root access? Swipe to intall supersu and u're rooted...
mschumacher69 said:
Once you unlock ur bootloader, u don't need exploit apps such as towelroot to gain root, all you need is a custom recovery such as twrp. Once you flash it and reboot from it, it will tell you that you're not rooted, do u want to flash supersu to gain root access? Swipe to intall supersu and u're rooted...
Click to expand...
Click to collapse
Yes that is true if you wanna fastboot via USB, which means connecting the phone to a PC. I was under the impression that I could not flash a custom recovery from the stock one. I have been struggling to gain root because of non-access to a computer. It is a little more lengthy but I find this to be the only no PC guide around, since I've been looking for one for 4 months now. And most certainly I would not be able to flash a recovery from the terminal emulator if I did not have su.
Towelpieroot only gives a tethered, temp root with no r/w privileges to system. It would make it impossible to flash a recovery from the terminal without gaining full root. This is why you need to run the original towelroot with the modified modstring.
REMINDER: THIS METHOD DOES NOT REQUIRE A USB CONNECTION WITH A COMPUTET. ITS ALL DONE ON THE PHONE.
XT 1032 Falcon from Cricket GSM 4.4.2 stock
Thanks for the guide. I ran towelroot 1.2 and it crashes my phone ;( and v3 says it's not compatible
lmf said:
Thanks for the guide. I ran towelroot 1.2 and it crashes my phone ;( and v3 says it's not compatible
Click to expand...
Click to collapse
Towelpieroot is buggy (the dev states in his post). I had to try the process numerous times. What i think may work (or may have worked). Is you have to make sure that before running towelpieroot again youbhave to clear it from the recents. What i have done was clear it from recents, uninstall. Reboot phone. Install and run again. Once you get temp root you can continue the process.
On towelroot v3. It will say your device is not supported. Tap on "welcome to towelroot v3" twxt three times and a modstring modification box will appear showing numbers. Input the modstring posted above in the OP "1337 0 0 0 4 0" (with the spaces). Then it will give you root
Note: According to some devs i have come across are telling me step 7 is not necessary. You can try skipping it. Unfortunately my bootloader and root are in effect, therefore i cannot verify this. You could try. [emoji3]
THIS NOTE ADDED TO THE OP AS WELL
BBobby said:
Note: According to some devs i have come across are telling me step 7 is not necessary. You can try skipping it. Unfortunately my bootloader and root are in effect, therefore i cannot verify this. You could try. [emoji3]
THIS NOTE ADDED TO THE OP AS WELL
Click to expand...
Click to collapse
It is definitely unnecessary. Once you unlock ur bootloader, all you need to do is flash custom recovery and it would flash supersu for u which would give u root...
Towelroot uses an exploit to root, exploits are only needed on a locked bootloader. Unlocked bootloaders don't need exploits to be rooted...
mschumacher69 said:
It is definitely unnecessary. Once you unlock ur bootloader, all you need to do is flash custom recovery and it would flash supersu for u which would give u root...
Towelroot uses an exploit to root, exploits are only needed on a locked bootloader. Unlocked bootloaders don't need exploits to be rooted...
Click to expand...
Click to collapse
Would it be OK to download super su from play store directly?
BBobby said:
Would it be OK to download super su from play store directly?
Click to expand...
Click to collapse
You wouldn't be able to download it directly. Once you unlock the bootloader, you flash custom recovery such as twrp, then when u reboot from twrp (or any other custom recovery), it would tell you that you're not rooted, would you like to install supersu? Swipe to install it and you're rooted. Then you can update supersu from the play store.
mschumacher69 said:
You wouldn't be able to download it directly. Once you unlock the bootloader, you flash custom recovery such as twrp, then when u reboot from twrp (or any other custom recovery), it would tell you that you're not rooted, would you like to install supersu? Swipe to install it and you're rooted. Then you can update supersu from the play store.
Click to expand...
Click to collapse
But my questions continue to be:
1. How do I flash a custom recovery from the stock one?. Will the terminal commands still be effective? Or an .IMG file flasher app like rashr will be effective without initial root?
2. Is it bad to just run towelroot V3 and gain permanent root in less than a minute, then just download super su and continue?
I just posted what has worked for me. I am thankful for your input and persistent suggestions. But like I said it has worked for me the way it is described in the OP. I just don't think it is necessary to fix what is not broken.
BBobby said:
But my questions continue to be:
1. How do I flash a custom recovery from the stock one?. Will the terminal commands still be effective? Or an .IMG file flasher app like rashr will be effective without initial root?
2. Is it bad to just run towelroot V3 and gain permanent root in less than a minute, then just download super su and continue?
I just posted what has worked for me. I am thankful for your input and persistent suggestions. But like I said it has worked for me the way it is described in the OP. I just don't think it is necessary to fix what is not broken.
Click to expand...
Click to collapse
1. Yes you can flash a custom recovery via a terminal emulator, but you would need root to be able to do it without using a PC.
2. I wouldn't say bad, it's rather unnecessary especially that it uses an exploit to gain root. You wouldn't know what unnecessary changes it makes to your system in order to be able to gain root.
mschumacher69 said:
1. Yes you can flash a custom recovery via a terminal emulator, but you would need root to be able to do it without using a PC.
2. I wouldn't say bad, it's rather unnecessary especially that it uses an exploit to gain root. You wouldn't know what unnecessary changes it makes to your system in order to be able to gain root.
Click to expand...
Click to collapse
The guide is about NOT using a PC. Its in the topic, in the OP, in my posts... Then yes, its necessary to gain some sort of root (permanent, in the towelroot case) to run the terminal emulator.
Two birds with one shot.
Moto G (XT 1032) from Cricket. Unlocked Bootloader, Rooted, Stock ROM (4.4.2) with Xposed tweaks
BBobby said:
The guide is about NOT using a PC. Its in the topic, in the OP, in my posts... Then yes, its necessary to gain some sort of root (permanent, in the towelroot case) to run the terminal emulator.
Two birds with one shot.
Moto G (XT 1032) from Cricket. Unlocked Bootloader, Rooted, Stock ROM (4.4.2) with Xposed tweaks
Click to expand...
Click to collapse
Fair enough, but I don't see why you wouldn't want to use a PC. It's safer if u use a PC because u wouldn't be using any exploits...
mschumacher69 said:
Fair enough, but I don't see why you wouldn't want to use a PC. It's safer if u use a PC because u wouldn't be using any exploits...
Click to expand...
Click to collapse
Do you even read the posts? I have not had a PC or access to one (yes, people like me exist). I have looked for months on end and once I came across towelpieroot it all became possible. Then jcase released sunshine and that all put it together in a working method. This is the collection of hour of searching. If anyone like me does not have PC access it is still possible. But I wouldn't want others to have to go through that frustration
Moto G (XT 1032) from Cricket. Unlocked Bootloader, Rooted, Stock ROM (4.4.2) with Xposed tweaks
Thanks for the useful guide.
Once you do all of this what can be done . Does this mean the device is carrier free or just allows to install any variant of android on it.
Also even after doing all of these things how one can activate it on a different network than it is bought to be used on.
Sorry i am newbie to flashing software.
Thanks
Mars
This is a guide to root this device. That means you have access to the operating system files. By getting this access it allows you to modify the system in many ways. It also allows you to install custom ROMs. Gaining root has so many uses I cannot list here.
But no, this is not a carrier/SIM unlock.
How about the 4.4.4 cricket XT1046 seems to be impossible at this point?
When I get to the step on gaining temporary root it just keeps loading and loading and it never gives me root.. Like I went on and off multiple times and it still won't work
BBobby said:
But my questions continue to be:
1. How do I flash a custom recovery from the stock one?. Will the terminal commands still be effective? Or an .IMG file flasher app like rashr will be effective without initial root?
Click to expand...
Click to collapse
Rashr needs root to flash images and zips
Edit: I didn't saw that you already have been answered
This METHOD was developed ONLY for an UNLOCKED Motorola Droid Razr Maxx HD XT926m phone that is already updated to the last version of KitKat 4.4.2 (System version "183.46.15.XT926.Verizon.en.US").
IF YOU HAVE AN LOCKED BOOTLOADER AND TRY THIS METHOD IT WILL BE ONLY YOUR RESPONSABILITY IF YOU DAMAGE YOUR PHONE !!!
My Motorola XT926m had an UNLOCKED BOOTLOADER (ICS 4.0.4) and I flashed via RSD Lite the last stock firmware, "183.46.15"... After that, I was, of course, unhappy, because I read on different forums that this firmware version didn't support root... I tried to download the Hydrogen Peroxide xt926 application that others users recommended here on XDA forum, without success.
But now, after I applied this method, my phone is again rooted... Enjoy the steps, but be carefull, it was developed for XT926 phones with UNLOCKED BOOTLOADER!
1. Download the files "VZW_XT926_4.4.2-KDA20.62-10.1_CFC_1FF.xml" and "VZW_XT926_4.4.2-KDA20.62-15.1_CFC_1FF.xml" from the Motorola firmware site: "motofirmware.com/files/file/"...
2. Unpack the files...
3. Substitute/replace the "gpt", "tz" files (FROM the folder with "15.1" version TO the folder with "10.1" version)... You should replace all the files that "RSD Lite" will tell you that don't fit when you try to flash the new stock firmware. You will obtain a MODIFIED version of "183.46.10" stock KitKAt 4.4.2 firmware!!!
4. Flash this MODIFIED "10.1" firmware with "RSD Lite v6.1.5 Multi-Flash" (without using Rsd Script Generator.jar), but don't forget to remove the first two 'getvar' lines in the xml file.
5. Download and install the "Towel Root.apk" and root the phone...
6. Now your phone should be ROOTED.
What to do NEXT:
7.Download from the Play Store and install "Superuser.apk" made by ClockWordMode and after reboot the application will ask you to update SU binary. In my case, the SU binary didn't support an online update and I installed the "Superuser.zip" file downloaded from the ClockWorkMode site, via recovery method, in order to gain this update (you can do this as well, if you already have a TWRP or CWM recovery installed on your phone). With the other version of superuser, like "SuperSU.apk" or "Superuser.apk" ("eu.chainfire.supersu-2.apk", the last version, 5.6mb, for example) you will need to follow the same steps...
8. Using "Total Commander.apk", you can go to "File System root"/"Etc"/"installrecovery.sh", and finally rename this last file... Or you can use "ES3 File Explorer.apk" in order to rename the same "installrecovery.sh" file in "Device"/"Etc" folder (choose, for example, the name "installrecovery.shbak")...
9. Flash with "Flashify.apk" (downloaded form PLay Store) a new "recovery img.": "TWRP.img" (2.8.3.0) or "CWM.img" (6.0.4.8) for KitKat... You can find them on "rootjunkysdl.com/?device=Droid%20Razr%20HD&folder=Firmware"...
10. If you flashed "TWPR recovery.img" you will need to install "Stericson.busybox-1.apk" (from Play Store...), because TWRP works with this busy box... (You could install "TWRP.apk" as well, but you must be careful, because you will need to be able to boot into Recovery mode directly from your phone (with the combination key), not from this app... Many times, the phone is able to boot into recovery mode from TWRP application, but not from the bootloader... That's why it is better to uninstall TWRP application if you have this problem). If you flashed a "CWM.img" you can install "RomManager.apk".
11.Now it is the time to backup your system to SD card!
That's it. My phone was unlocked, and I didn't have any issue following all this steps... If you're locked don't try it.
But.. If you're locked you could instead use an application named 'Safestrap' for some purposes (read more here on XDA forum please), because is destinated for the phones with locked bootloader...
Hi ,
Since this is a guide it does not belong to XDA Assist
Please Read The Purpose of XDA Assist
Please Standby when Moderators Move the Thread To Your Device Specific Forum
RAZR HD General
jackeagle said:
Hi ,
Since this is a guide it does not belong to XDA Assist
Please Read The Purpose of XDA Assist
Please Standby when Moderators Move the Thread To Your Device Specific Forum
RAZR HD General
Click to expand...
Click to collapse
THANKS!
I know you took a lot of time to write this up, but there is a downgrade method posted on here already. Also, there is no need to rename recovery.sh. All you need to do after flashing recovery is power off the phone and immediately boot straight back into recovery so the install script completes.
To answer your question, no, you can't unlock .15.
RikRong said:
I know you took a lot of time to write this up, but there is a downgrade method posted on here already. Also, there is no need to rename recovery.sh. All you need to do after flashing recovery is power off the phone and immediately boot straight back into recovery so the install script completes.
To answer your question, no, you can't unlock .15.
Click to expand...
Click to collapse
Thank you, I wasn't able to find another downgrade method, could you give me the link, please?
http://forum.xda-developers.com/showthread.php?t=2789743
But... to flash CWM or TWRP for update the binaries, you need to be bootloader unlocked... to flash a custom recovery...
joel_sinbad said:
But... to flash CWM or TWRP for update the binaries, you need to be bootloader unlocked... to flash a custom recovery...
Click to expand...
Click to collapse
Correct. That's why this method is flawed and probably should be pulled before someone bricks their phone.
RikRong said:
Correct. That's why this method is flawed and probably should be pulled before someone bricks their phone.
Click to expand...
Click to collapse
Yeah, unfortunately this post makes no sense, I mean, if you accidently flash the gpt.bin, you're screwed... and so many risks, plus, you can't flash custom recovery, and you can maybe downgrade the system and boot, but you still can't downgrade the bootloader...
joel_sinbad said:
Yeah, unfortunately this post makes no sense, I mean, if you accidently flash the gpt.bin, you're screwed... and so many risks, plus, you can't flash custom recovery, and you can maybe downgrade the system and boot, but you still can't downgrade the bootloader...
Click to expand...
Click to collapse
This method is for an XT926 with UNLOCKED BOOTLOADER, with the last 183.46.15 update and the root access lost. I only described the steps that I already done with my phone. My Maxx HD is working and has root access again... I flashed custom recovery too (TWRP 2.8.3.0), I haven't any other problem.
RikRong said:
http://forum.xda-developers.com/showthread.php?t=2789743
Click to expand...
Click to collapse
Thank you, unfortunately is not working for the xt 926 phone that already took the last 183.46.15 update:
"..........************WARNING*************
this guide only works completely if you did NOT take the 183.46.15 update rolling out around 9/9/14 .............".
Until now I don't have any other option, I'm forced to preserve the method that I mentioned in my thread.
ciprianv. said:
Thank you, unfortunately is not working for the xt 926 phone that already took the last 183.46.15 update:
"..........************WARNING*************
this guide only works completely if you did NOT take the 183.46.15 update rolling out around 9/9/14 .............".
Until now I don't have any other option, I'm forced to preserve the method that I mentioned in my thread.
Click to expand...
Click to collapse
The piece you are referring to that doesn't work on .15 is the unlock and root. The downgrade should work on an unlocked phone.
That aside, your steps are very confusing and could easily cause a locked user to brick their phone. Please clarify or I will continue reporting this thread until it gets removed.
RikRong said:
The piece you are referring to that doesn't work on .15 is the unlock and root. The downgrade should work on an unlocked phone.
That aside, your steps are very confusing and could easily cause a locked user to brick their phone. Please clarify or I will continue reporting this thread until it gets removed.
Click to expand...
Click to collapse
I just edited the post. I clearly specified that this methid is ONLY FOR UNLOCKED BOOTLOADERS (XT926M).
ciprianv. said:
I just edited the post. I clearly specified that this methid is ONLY FOR UNLOCKED BOOTLOADERS (XT926M).
Click to expand...
Click to collapse
Thanks for doing that, I just want to make sure no one messes up their phone.
need help with root I have tried almost all the rooting app and software and still not able to root the phone can anyone help me with safe method to root the phone or best app or software for rooting the phone
Phone model :Lenovo A6000 Plus
Software :S030_151030
sourabh25kothari said:
need help with root I have tried almost all the rooting app and software and still not able to root the phone can anyone help me with safe method to root the phone or best app or software for rooting the phone
Phone model :Lenovo A6000 Plus
Software :S030_151030
Click to expand...
Click to collapse
Simplest method ==>> KingRoot
Please note that sometimes it might show you, failed to root. But keep on retrying and you'll get root access.
P.S. Not all root requiring apps are compatible with KingRoot. So, for full access of root, flash a custom recovery first (twrp preferred) and then flash latest SuperSu zip. Search in this forum, you'll find them easily.
sasukay said:
Simplest method ==>> KingRoot
Please note that sometimes it might show you, failed to root. But keep on retrying and you'll get root access.
P.S. Not all root requiring apps are compatible with KingRoot. So, for full access of root, flash a custom recovery first (twrp preferred) and then flash latest SuperSu zip. Search in this forum, you'll find them easily.
Click to expand...
Click to collapse
Already tried that but it show error strategy unavailable
sourabh25kothari said:
Already tried that but it show error strategy unavailable
Click to expand...
Click to collapse
Thats what I'm saying. You have to keep on trying. And, don't forget to keep internet on and use the latest version for faster results.
Hi all,
let me first start by thanking the good people of xda community for your kind help and contribution. It would not be possible for people like me with extremely limited rooting knowledge to even have the courage to attempt a root if it wasn't for the good people like you here.
I just got my Axon 7 and is trying to work up the courage to attempt a root following tenfar's instruction (I'm extremely scared of bricking my new phone) I also hope that I can continue to play Pokemon Go after I root it, but unfortunately with the latest update, it seems impossible until I discovered Magisk. My question may seem fairly simple but it is extremely confusing to me. In Magisk's instruction it says that in order to install Magisk, one must remove any kind of root and systemless Xposed. Since my phone is not rooted, I do not have to go through the step of removing root and xposed? However, it says that I have to download Magisk and flash it. My confusion rests on the concept on how I can flash Magisk if my phone is not rooted? I thought one can only flash a rom etc after the phone is rooted? So should I follow tenfar's root first and root my axon 7 then try to flash Magisk? or the other way around? Any advice /tips/precautions/high level guides regarding both rooting using the tenfar method and flashing Magisk is greatly appreciate! I may suck at rooting and etc, but what I can do is follow all instructions carefully. Thank you everyone, you are the best!
To flash something (a ROM or an app, like Magisk) you need to have a custom recovery installed (such as TWRP, you boot into the custom recovery to flash the .zip file that contains whatever you want to flash) which generally means having an unlocked boot-loader, neither of those has anything to do with root (other than that they make rooting the phone considerably easier) they don't require it and they don't do it by themselves.
@Nameless One is right, you need a custom recovery (TWRP) to be able to flash Magisk. There is a thread about this in the forums.
However I would advise you to wait until next week when a new update is expected and perhaps some changes to the bootloader unlock policy and hopefully stock ROMs, which will make it much easier to solve any problems.
If you insist on going through with this now, you should take backup images of various partitions so that you can restore your phone to stock to receive the OTA.
How does it work if you have uninstall any kind of root? I would think root would be a requirement.
KyJelly69 said:
How does it work if you have uninstall any kind of root? I would think root would be a requirement.
Click to expand...
Click to collapse
It right on the top of their post
"This mod requires boot image modification, so unlocked bootloaders are required!"
What it does is implement it's own system-less root management module that will not be detected like other root methods. But will conflict with other root methods hence you have to be unrooted
Unlocked bootloader let's you flash custom recovery. That in turn let's you flash anything else including root modifications. In essence tenfar's boot image is modified to allow root. This will do something similar but you have to have the BL unlocked since patching boot image will change the signature.
iirc magisk alters the bootimage, so you need a unlocked Bootloader go get it to work.
And no, root is not a preq, you can use magisk to /aquire/ root though.
What u need:
- unlocked bootloader
- custom recovery
- a somewhat clean and not already modified system
Thank you all for the helpful replies, I greatly appreciate them.
I'm running out of the box ZTE Axon 7 A2017U with 6.0.1 Android. My goal is to install Magisk then eventually root so I can play Pokemon Go on the phone. Please advise on the next step? What are some of the safety precautions I should take? Thank you all very much!
I'm also planning on waiting until the next update [email protected]'s advice. Can anyone please explain to me the reasoning behind mh127's safety precautions? Thanks!
projectseahorse said:
Thank you all for the helpful replies, I greatly appreciate them.
I'm running out of the box ZTE Axon 7 A2017U with 6.0.1 Android. My goal is to install Magisk then eventually root so I can play Pokemon Go on the phone. Please advise on the next step? What are some of the safety precautions I should take? Thank you all very much!
I'm also planning on waiting until the next update [email protected]'s advice. Can anyone please explain to me the reasoning behind mh127's safety precautions? Thanks!
Click to expand...
Click to collapse
If you have copies of the stock images you will probably be able to fix your phone if something goes wrong and you want to go back to stock.
Not having these copies is like jumping out of a plane without a parachute and hoping you'll hit a haystack, without the pitchfork in it...
There are never any guarantees, every phone is different and as you are playing with important partitions there is a chance, generally through users fault, to brick your device...
Hello all,
Do we know if the "stock rom" @mh127 was talking about is available? Am I safe to proceed with the the magisk/root installation? Thanks!
projectseahorse said:
Hello all,
Do we know if the "stock rom" @mh127 was talking about is available? Am I safe to proceed with the the magisk/root installation? Thanks!
Click to expand...
Click to collapse
Well, the stock images have not been released for the B27 update, which would make it much easier to recover if something goes wrong. However, unofficial images are available (look around the forums). So at this point it is your call, just be careful.
Hello friends
My phone is HTC One m8w
There isn't "update" in
Setting
About
Android version,
5.0.1
Software number
1.0.0.m8w
Build number
4.19.1402.15 CL458284 release-keys
Please help me for this problem
How can I update my phone?
Thanks a lot
Hello, I experienced something similar- complete absence of system update! A little digging revealed that any modifications to the system partition would render the device un-updateable, so naturally I downloaded the complete marshmallow package update for my device, booted into standard recovery, and updated from sd card
Hope this helps
Ta3miyyasandwich said:
Hello, I experienced something similar- complete absence of system update! A little digging revealed that any modifications to the system partition would render the device un-updateable, so naturally I downloaded the complete marshmallow package update for my device, booted into standard recovery, and updated from sd card
Hope this helps
Click to expand...
Click to collapse
There isn't any update for my build number
Sent from my HTC_M9pw using Tapatalk
if you are willing to, just root your phone and flash the marshmallow rom on to your phone and use titanium backup to backup everything before you do so.
you can root your phone,flash twrp recovery,flash Marshmallow rom.
lmentor said:
you can root your phone,flash twrp recovery,flash Marshmallow rom.
Click to expand...
Click to collapse
That's exactly what I just said
justinchao740 said:
if you are willing to, just root your phone and flash the marshmallow rom on to your phone
Click to expand...
Click to collapse
You don't need root to install TWRP, nor to install a custom ROM.
Exception is Verizon, where you need root to s-off, and then unlock bootloader; as bootloader unlock by HTCDev.com is not supported for that version alone.
redpoint73 said:
You don't need root to install TWRP, nor to install a custom ROM.
Exception is Verizon, where you need root to s-off, and then unlock bootloader; as bootloader unlock by HTCDev.com is not supported for that version alone.
Click to expand...
Click to collapse
If you get bootloader unlocked, you basically rooted your device cause now you are allowed to modify the system data and make modification that can result in unusable phone. Plus if you are willing to take the risk of unlocking your bootloader, why don't you just root anyways, its just a matter of flashing super su zip.
justinchao740 said:
If you get bootloader unlocked, you basically rooted your device cause now you are allowed to modify the system data and make modification that can result in unusable phone .
Click to expand...
Click to collapse
No, you didn't. Root is a very specific thing. You either have root (SU) priviledge, or you don't. Unlocked bootloader does not give you root privilege. It only allows you to flash unsigned zips to certain partitions.
justinchao740 said:
Plus if you are willing to take the risk of unlocking your bootloader, why don't you just root anyways, its just a matter of flashing super su zip.
Click to expand...
Click to collapse
Because it would be a wasted step (completely unnecessary), if you are going to flash a custom ROM.
redpoint73 said:
No, you didn't. Root is a very specific thing. You either have root (SU) priviledge, or you don't. Unlocked bootloader does not give you root privilege. It only allows you to flash unsigned zips to certain partitions.
Because it would be a wasted step (completely unnecessary), if you are going to flash a custom ROM.
Click to expand...
Click to collapse
Think of it this way. If you flashed a cm ROM without root in the first place, you would get root. I'm not saying unlocking bootloader immediately give you root access but it allows almost anything that you flash to have root access
justinchao740 said:
Think of it this way. If you flashed a cm ROM without root in the first place, you would get root. I'm not saying unlocking bootloader immediately give you root access but it allows almost anything that you flash to have root access
Click to expand...
Click to collapse
Some folks keep incorrectly stating that you need root to flash custom recovery on this device (on some devices, you do - but not this one). I'm just trying to make sure that misinformation doesn't keep getting conveyed (the post after yours said it, too).
Stating the process precisely, is the best way to do that.
redpoint73 said:
Some folks keep incorrectly stating that you need root to flash custom recovery on this device (on some devices, you do - but not this one). I'm just trying to make sure that misinformation doesn't keep getting conveyed (the post after yours said it, too).
Stating the process precisely, is the best way to do that.
Click to expand...
Click to collapse
Agreed plus my post never stated anything about rooting.
justinchao740 said:
Agreed plus my post never stated anything about rooting.
Click to expand...
Click to collapse
While my intent is not to be the guy that always has the last word; I also can't let you state a complete falsehood.
justinchao740 said:
if you are willing to, just root your phone and flash the marshmallow rom
Click to expand...
Click to collapse