I have a Huawei Y3. When I set the volume to the loudest setting within settings all sounds good on test but when the phone is subsequently phoned the volume is much lower and not easy to hear. I'm non geeky but I know I'm making the right changes in settings. What do I do? I know nothing about rooting and what not. Is there anyone can give me a blow by blow account of what to do to resolve this.
P.S. Its my 81 year old Mothers and having finally convinced her to go smart phone she can't now hear the thing!
Related
So, I'm experiencing what everybody else is with this ROM. That initial volume level starts out soft and gradually increases to the max that I have it set to. Some have stated they like this and that's fine. But, I HATE it :evil: . I can never hear my phone ring anymore if it's in my pocket. Has anybody found a possible registry key or setting somewhere to turn this off?
And if any AT&T folks are listening.. I'd like a setting in the volume area to turn this off or on.
Phone Profile
Have you check under phone profiles... Ascending Ring change to Standard Ring
Dustoff
I don't have a phone profile, or i should say i don't see any where for that option. In the phone settings area the Ring Type is set for Ring. There is an option for "Increasing Ring" but that's even worse than it is already. I don't think this is what I'm looking for.
Since the WM2003 upgrade on my SX56, 've noticed issues with the speakerphone volume. I can barely hear it in fact. Any thoughts on this one?
Fiddled around with the volume setting, moved it up and down, and the now the volume issue seems resolved. Can't say for sure if that's what resolved it, but it's fine now.
I'm experiencing the same problem with the AT&T rom.. I'm going to take a look around in the registry later on... before I go installing any apps
Well I have taken a look @ the processes running and can't see anything obvious that would be doing the volume thing..
So I have had a poke about in the registry and have found a section with sound profiles and it has an attenuation property, I have tried adjusting this, and deleting it but still no good
Also there is an entry in the registry called Hack and mentioned Vol in the string... but it didn't make any difference when I deleted that either :roll:
If anyone thats a bit more acomplished than myself with the PPC Phone could take a look and find a solution to this, i'm sure many users would appreciated it
Has anyone figured out how to make the volume level constant yet?
Any solutions to get the volume working well on A.30.09 ENG yet?
Nope. I just put my phone volume on next to the top setting and the system volume two levels below it. Works fine then. As long as the system volume is two levels below it will not graduate the sound.
valheru said:
Nope. I just put my phone volume on next to the top setting and the system volume two levels below it. Works fine then. As long as the system volume is two levels below it will not graduate the sound.
Click to expand...
Click to collapse
Another thing try ur Reminder set an Alarm you'll notice that you cannot change the Alarm1 ringtone thus the sound stays low ..I tried many things in the registry and no luck as well I wish would some1 help us to resolve this Issue, but!! I made contacts with att's support ,I told them about this problem thus I'm not the only one who's experiencing this, lots of ppl sees this ennoying , I hope they would help here...
Hi all,
This is an issue which has been semi bugging me since getting my Touch HD a few months ago.
If I use Touchflo and go into settings for the ring volume, I put the slider right down to '2%'. When a call comes in, it's still very loud indeed.
I've tested so that if I put the volume up to say 80% and call in again, its VERY very loud!
I want it that I can leave my ringer on say 5% or 10% when I'm working so that I can hear the ring tone but not disturb other's who maybe close by.
Also, upon testing, if I change the ring tone type, then when it 'preview plays' the ringtone its nice and quiet, kind of at the level I'd like it to ring. However, when then selecting the ringtone and clicking done, I test with an incoming call and it's much louder.
Am I missing something here? I've never had this issue with any of my previous Xda's/HTC phones.
I had a look in search but nothing seems to show up like this from other posters - could my handset be faulty?
Or, do I need to buy some software which controls this better and offers more profiles than just the 4 standard ones?
Any ideas out there please?!
Cheers! Dennis, West London UK!
I think the volume setting goes by an incremental of 20%. Yeah, at the lowest 20%, it is still quite loud. The default Innovation ring is excessive loud. You can try another one which is not as disturbing at 20% setting
Hi there,
Thanks for the response!
Yes, I had the 'innovation' ringtone set and have now changed it to generic 3 which is 'better' !
Is there any software out there specifically for ringtone generation? maybe I could create ringtones and record them at a 'lower recording level' to acheive a 'low' sounding ringtone on the THD without this 'limitation' I pointed out/experience?
having done a search, I can't quite beleive I'm the only one who seems to have noticed this!
Might have to find those 'funny' ringtones - the Brad Pitt Snatch dialogue " why the **** would i wanna caravan with no ****ing wheels' being my favourite !
Cheers! Dennis! West London UK!
Your not the only one who has this problem. There is a other thread about the music player and the volume there, but the whole TF3D volume is just way too high . Annoys me aswell
Please, please help guys.
My HD2 is ear-piercingly loud during a call even when i turn the volume down to a min.
I have searched the forum but cant find a definitive answer to lower the volume even further....there must be a work-around!
When i am at work, nearly the whole office can hear the other person talking to me, it's quite embarrassing.
Any help would be greatly appreciated.
Thanks
Its a known bug, several people have contacted HTC about this.
They have said they are going to release a hotfix for it, quite as to when and if they even are is another thing.
oh ok then.
i take it, there will be info posted on this forum when/if something has been released?
If you are talking about the same problem I have, there is a temporary solution.
What I find is that when I am dialling, the volume is terribly loud. However if I press the volume up one notch, then down - it goes to the correct volume.
Seems there is a default minimum that overrides the user defined level, but once you alter the user defined level, it takes notice.
Odd, but works for me.
I have never had this issue, but I use Volumex (http://volumex.jdbp.mobi). Gives me a better control of it. Give it a try
This morning when I revieved a call I could barely here the person talking to me. It was like the in call volume was turned to the lowest setting.
I am just past the 14 day return period so I have to do a warranty exchange. Has anyone else had or heard of such problem?
Sent from my SGH-T959 using XDA App
if you haven't already seen and done this, try this:
I had this same problem. One easy solution I found was turning the HAC mode on (found under Settings > Call Settings). This increases the call volume a good bit. But it doesn't change the bluetooth or wired headset volume.
Unless Im missing the point, just use your volume rockers and adjust the volume up. Its pretty loud when you crank it up.
this may not even be your problem.
For most of my calls the volume rocker gave plenty of headroom. I just had to turn the HAC mode on to boost the volume for my one friend that's a "low talker". Same person but on my G1 the volume was fine.
turning on hac mode helps thanks
kizer said:
Unless Im missing the point, just use your volume rockers and adjust the volume up. Its pretty loud when you crank it up.
Click to expand...
Click to collapse
Im not going to speak for OP but i know that for me whenever i answer a call its at 3/4 volume even whenever i turn it up the next call i pick up will still be at 3/4 volume. seems to be a "feature" so you dont get blasted by someone on the other end however at the same time its annoying when i talk with my wife all the time and shes soft spoken.
It's not the rocker, I have it turned all the way up though I noticed that changing the volume makes no difference, the sound is still extremely low. My problem is most likely a hardware issue.
I called in for a warranty exchange and I should be getting a new phone any day now
glennordway said:
if you haven't already seen and done this, try this:
Click to expand...
Click to collapse
This works great! Thank you. I called Samsung and they said there was no way to increase the handset volume. Well pretty sad users know more about the phone workings than the damn company!
Skatturbrain said:
Well pretty sad users know more about the phone workings than the damn company!
Click to expand...
Click to collapse
Thats because companies do not train their customer service reps on the devices. Then they transfer you over to "technical support", who are the same people just going through basic troubleshoot software provided by the REAL techincal folks at samsung. Calling them always insults my intelligence, because ill try to speed the call up by saying "ive already tried all of the basic troubleshooting methods", yet they will continuously ask me things like "did you try a reboot?", "did you pull the battery?".
Bottom line, these companies cannot afford to pay thousands of Sombionixes and Cyanogens to handle tech support hahaha
I'm not sure why it happens but sometimes my phone what seems at random just decides to go to loud. I hate hearing the noises of phones idk they annoy me lol so i set it always to vibrate and like said before it goes to loud. It seems to do it when plugging in and just random times not sure I don't want the phone to decide when to go to loud especially if i'm in class or something.
this last part annoyances with the phone but love it overall may have to going back to my addiction with roming it lol. Vibrate when inputing things all the time and camera motor vibrating (think there may be a solution for that haven't seen it in a while tho so may be fixed on latest os rom, battery dieing sort of fast some days. that's it i love the phone otherwise I've gotten out of phones so its been perfect otherwise. thanks for anyones help
@spriteboost, which kind of ZTE phone are you have, A2017G or A2017U? Could you tell us your phone's IMEI?
I have the a2017u and yeah my imei I will not post that anywhere thank you very much don't need that cloned for someone else's uses.
Do you have any automatic rules set up in your sound profile?
settings -> sound & notification -> do not disturb -> rules
This wouldn't explain why the volume is switching on when you plug it in, but worth checking anyway