When i'm trying to use my mobile data network, hotspot and etc. I cant received message and call.
When im not use data network, hotspot and etc. its normal, i can received message and call.
Already try for change to stock rom and other custom rom, but problem still sme.
Pleaase help me, im so sorry for my bad language.
Related
Hi. I need your help...
I had a T-Mobile G1. RC33 US Firmware.
But in my country there is NO Data Plan available so I had to downgrade to RC29 US Firmware for being able to activate via Wireless Network...
I am going to explain (shortly) what i do.. I copied the RC29 to the SD-Card and downgrade successfully... Activate ADB controls... And launch Wifi-Settings.. Activate via Wifi without any problems... Everything original..
The phone was activate successfully. I can send and receive SMS without any problems..
BUT!!!! I cant hear anything when I call someone. And they cant hear me neither. I see when the call is connected but there is no sound at all... I receive the call but no sound at all... The phones Rings and Vibrate. BUT no sound trough.
Could you help me and explain what can I do to fix this??? I am a newbie.. So i will be more than pleased if you explain to me SLOW MOTION....
there is a chance that downgrading make this to happen???
THANKS in ADVANCE and BR!!!!
Ok,
Here is the rundown...
I've got a Cellcom Mogul running on Sprint, don't ask, its working as far as voice.
I'm trying to get the data connection working although I've been pretty unsuccessful.
I'm running a wm6.5 rom, although I was running a 6.1 rom too and couldn't get it.
I'm rusty with WM since going over to Android and could use some help..
I've installed the update profile/prl cab, neither work. It seems to hang on "The network is updating your PRL" same with the Profile.
I'm assuming I need to update my profile, not sure how to go about it since the Sprint tool doesn't work.
I've changed the user name to [email protected], I'm not sure what to put as a password, I've got it blank now.
In the data settings I have the #777 with no username/password.
If someone could get me all the m ip settings that would be great.
Anyone?
Anyone have any idea how I can get the data to work. It is registered on my account nothing illegal by buddy at sprint got the ESN added for me so I went back to the original and just need help with the data connection.
IOTA fails everytime.... #777 won't connect.... what can I do?
Update profile fails also.
you might try the "restore" for the data connection, then an iota update.
Did you flash a stock sprint rom?
Hey.
I updated my LG Gt540 to Eclair 2.1 and I am really happy that I´ve done that.
As I wanted to use the internet (no WiFi, i think its called GPRS) it doesn´t work.
My question is, why is it so? Can I bring it back to work?
TehBone
Check apn settings
Sent from my GT540
go to network settings and select your 3g network provider manually.
if that doesn't solve it, you'll need to flash another rom. I don't have internet on the baltic rom, but no problems with the open europe one. have no idea why that is...
THX.
Can I check my APN with APNonoff or another app?
Ehm. I don´t know if network is the right word for my problem. So in german its something with the internet. So the Internet (no WiFi, WiFi works well ) does´t work.
TehBone
O.K. I have a Problem!
As I wanted to update to an open European rom, the OS seems to be a bit broken.
Evertime I did anything a small little Windows Pops up, that the OS ist broken.
What do I have to do?
As I boot the Phone again it stops with the "LG"-Logo. How can I do an downgrade or Update or anything else, so that the Phone works again?
PLS Help!!!
TehBone
Hy guys, first of all sorry for my english, because I'm Italian!!
I buyed a Galaxy Note 4 Snapdragon SM910F!
One day, suddenly, I lost the possibility to call o to receive call, send message.... but I have connection and I can use It!
I try to do root, to change room, but It doesn't work.. I change SIM and I try with other operator, but I have the same problem!!
Sometimes if I reboot the phone and I connect it with USB to PC I can call, but when I disconnect the phone from PC, after 15 minutes I lose the registration to the network(to call) buti I have internet (3g 4g).
Actually I have root, cyanogenmod 12.1.
Could you help me?
There could be something wrong with your modem. Please consider that, when you flash a custom rom, you don't flash a new modem as well, so going from a custom rom to another won't very likely solve the problem.
I would look for the zip with the right modem.bin, but I suppose you'd better make a backup of your efs partition (to save the imei) and then clean everything and flash a stock rom via odin.
hello guys,
sorry for my bad english
need some expert help
i have a p8 gra-l09
emui 4.0.1
build gra-l09c432b390
since a couple of weeks i cannot place or answer calls (since build b200, it was working before)
tried with 3 different builds
tried with 3 providers, same issue
in fact the phone can only connect to providers with 4g, it's impossible to switch manually to 3g/2g settings, no networks detected
so i think as the phone can't switch, is unable to connect to audio call
with 4g network i'm able to connect to internet, and sending receive sms too
did you already heard about this kind of issue ?
thx a lot for you help
Raphael
rafff30 said:
hello guys,
sorry for my bad english
need some expert help
i have a p8 gra-l09
emui 4.0.1
build gra-l09c432b390
since a couple of weeks i cannot place or answer calls (since build b200, it was working before)
tried with 3 different builds
tried with 3 providers, same issue
in fact the phone can only connect to providers with 4g, it's impossible to switch manually to 3g/2g settings, no networks detected
so i think as the phone can't switch, is unable to connect to audio call
with 4g network i'm able to connect to internet, and sending receive sms too
did you already heard about this kind of issue ?
thx a lot for you help
Raphael
Click to expand...
Click to collapse
I'm in the exact same situation. I tried to rollback from b390 to b170, b200 but it's the same (stock rom).
I tried to flash the modem/radio but I can't : FAILED (remote: Command not allowed)
Any idea someone ? I'm getting desperate
psy_ said:
I'm in the exact same situation. I tried to rollback from b390 to b170, b200 but it's the same (stock rom).
I tried to flash the modem/radio but I can't : FAILED (remote: Command not allowed)
Any idea someone ? I'm getting desperate
Click to expand...
Click to collapse
guys did you manage to get this resolved?
Hi again. I have sort of figured something more out about the problem. This morning 3G did not want to work again. So I googled, and googled and googled. Tried everything basically. Then I noticed that my APN settings are not what they were last time I set them(???). So I went into my carriers website. Set the correct apn values and removed any unnecessary values that did not seem to affect anything. Then it immediately worked again. Now I have no idea how phones sets the default settings but it seems like they are wrong? Maybe this was just random that it started working after applying the correct settings again. No idea, going to see if it works all day or if it randomly stops working as earlier.
Edit: 5 hours later still works and the connection hasnt stopped randomly.
Ok so it has worked for 13 hours. It's actually weird if the APN settings for 4g broke the 3g connection sometimes randomly throughout the day, right? I don't know how apn settings really work but I remember setting a port number and also changed the name of the APN so that I can be sure it does not change to something else.