Related
Greetings;
Would anyone know if there is a F2FS compatible Custom Rom for N6P?
Thank you.
There is a custom ROM which supports F2FS, but AFAIK there is no way to format the system and data partitions to F2FS. Hopefully one day TWRP will support native F2FS formatting.
samteeee said:
Greetings;
Would anyone know if there is a F2FS compatible Custom Rom for N6P?
Thank you.
Click to expand...
Click to collapse
ripv2 said:
There is a custom ROM which supports F2FS, but AFAIK there is no way to format the system and data partitions to F2FS. Hopefully one day TWRP will support native F2FS formatting.
Click to expand...
Click to collapse
A custom TWRP was released today for this....
http://forum.xda-developers.com/showthread.php?p=65193930
Batfink33 said:
A custom TWRP was released today for this....
http://forum.xda-developers.com/showthread.php?p=65193930
Click to expand...
Click to collapse
Merci.........
So twrp gives error trying to change cache to f2fs. Also, system gets rewritten to ext4 when you flash. Data will stay at f2fs though.
Im using a levovo a6000 android phone after rooting my phone i tried to install a custom rom
then when i checked my internal memory it was showing a 0mb of internal memory
the errors are as follows
1. E : unable to mount /data/media/TWRP/ .twrps when trying to read setting file.
2. E: Unable to mount '/data'
3. E: unable to mount '/storage'
Even on wiping dalvik cache and cache
i have rooted my phone using amd command prompt help me ee
nikhil7870 said:
Im using a levovo a6000 android phone after latest offical android update given by lenovo came my phone booted ok
then when i checked my internal memory it was showing a 0mb of internal memory
the errors are as follows
1. E : unable to mount /data/media/TWRP/ .twrps when trying to read setting file.
2. E: Unable to mount '/data'
3. E: unable to mount '/storage'
Even on wiping dalvik cache and cache
i have rooted my phone using amd command prompt help me ee
Click to expand...
Click to collapse
How did you managed to install the ota update on rooted device....!??
oops sorry its my friend mistake
sasukay said:
How did you managed to install the ota update on rooted device....!??
Click to expand...
Click to collapse
i had flashed a custom rom through TWRP please help me to figure it out
nikhil7870 said:
i had flashed a custom rom through TWRP please help me to figure it out
Click to expand...
Click to collapse
Boot into twrp and wipe cache, dalvik, data and system. Then flash the custom rom
sasukay said:
Boot into twrp and wipe cache, dalvik, data and system. Then flash the custom rom
Click to expand...
Click to collapse
while wiping data, cache , dalvik cache ,system, cache , data
its give a error wipe complete failed
and another error is
E: UNABLE TO MOUNT '/DATA'
E: UNABLE TO MOUNT STORAGE
Can xda developer fix my problem i think that xda is best and i always follow them but now i cannot get any help from you please help me
nikhil7870 said:
Can xda developer fix my problem i think that xda is best and i always follow them but now i cannot get any help from you please help me
Click to expand...
Click to collapse
Flash cwm any try wiping and then flash new rom from
http://forum.xda-developers.com/showpost.php?p=66472910&postcount=4
sasukay said:
Flash cwm any try wiping and then flash new rom from
http://forum.xda-developers.com/showpost.php?p=66472910&postcount=4
Click to expand...
Click to collapse
I think ur system partions is corupted
amithchinu said:
I think ur system partions is corupted
Click to expand...
Click to collapse
if it is corrupted then how to fix it and can u tell me how to do repartition
Go here http://forum.xda-developers.com/showthread.php?t=2683787 u will get solution
---------- Post added at 02:55 AM ---------- Previous post was at 02:54 AM ----------
If it does not work goto service center
amithchinu said:
Go here http://forum.xda-developers.com/showthread.php?t=2683787 u will get solution
If it does not work goto service center
Click to expand...
Click to collapse
You might not know this, but every device has its own different system partitions. The thread you were referring to is for Asus Transformer Pad. Following that might make the problem worse.
But this is ASus phone it works on lenovo a6000
sasukay said:
You might not know this, but every device has its own different system partitions. The thread you were referring to is for Asus Transformer Pad. Following that might make the problem worse.
Click to expand...
Click to collapse
No bro it has sameproblem unable to mount data and cache there is solution to solve
amithchinu said:
No bro it has sameproblem unable to mount data and cache there is solution to solve
Click to expand...
Click to collapse
In that tutorial mmcblk0p8 is being formatted because that memory location has the /data directory on Asus Transformer. But, in our device the /data can be in any other partition, and doing that might brick the device permanently
Delete the recovery log from twrp folder and flash another twrp from flashtool or rash..what version are you using? If it is indeed a corrupted partition, you can reflash your phone using qfill
Try using the Fix Permissions in TWRP recovery...
It may help.
:fingers-crossed:
@nikhil7870 do you solve this problems?
nikhil7870 said:
Im using a levovo a6000 android phone after rooting my phone i tried to install a custom rom
then when i checked my internal memory it was showing a 0mb of internal memory
the errors are as follows
1. E : unable to mount /data/media/TWRP/ .twrps when trying to read setting file.
2. E: Unable to mount '/data'
3. E: unable to mount '/storage'
Even on wiping dalvik cache and cache
i have rooted my phone using amd command prompt help me ee
Click to expand...
Click to collapse
Best way is install the latest twrp I.e 3.0.2 and do the format everything instead of advanced wipe. Your problem will be solved. I too faced the same problem and I did what I have advised you. It worked.
cyberwarrior_a said:
Best way is install the latest twrp I.e 3.0.2 and do the format everything instead of advanced wipe. Your problem will be solved. I too faced the same problem and I did what I have advised you. It worked.
Click to expand...
Click to collapse
Is the problem resolved??
I have solution
Bro don't take so much tension , thats not hardware problem its only your Recovery's reading cache error . you can simply fix this by flashing old version of recovery and from that old recovery again wipe what you want to remove but man don't touch your mount section column , after wiping data and anything else simply flash new twrp.img then simply reboot recovery . wollllaaa you got your partion cache back now again you can simply flash you favorite roms. I hope you understand what you have to do now . But please follow these steps carefully :good: .
Remember don't flash KitKat recovery over lolipop recovery otherwise you got bootloop. Old recovery means suppose if you have now twrp v 3.1 just simply flash v2.8 then after wiping things you want , then simply flash twrp v 3.1 .
If you still have any doubt you can contact me via WhatsApp - +91 9205097520 (indian no. ) or simply reply me on xda or simply mail me at - [email protected] . And at last don't forget to tell me about your device problem .
I was trying to convert my system, data and cache to F2FS but after the conversion I can't use Data anymore (apparently it cannot mount data and system anymore).
Could be a problem LinkedIn to the grarak modded 3.0.2 I'm using for Exodus 6?
Any feedback is welcome!
Up
Most probably as the official one from twrp supports f2fs natively.
I would recommend to go back to official twrp convert to f2fs properly from there and then flash the modified one, do this if you are brave enough, i havent tried this method but it should work. If all fails stay on ext4 till garak or twrp updates their twrp versions.
Thanks for you answer... I thought the same... I'll try as the new phone will come and let you know...
IlD4nX said:
I was trying to convert my system, data and cache to F2FS but after the conversion I can't use Data anymore (apparently it cannot mount data and system anymore).
Could be a problem LinkedIn to the grarak modded 3.0.2 I'm using for Exodus 6?
Any feedback is welcome!
Click to expand...
Click to collapse
I got the same error for my Redmi Note 3 ... tried 3.0.0.0, 3.0.2.2, but nothing. then a guy suggested this:
https://www.androidfilehost.com/?fid=24591000424943818
and it worked. Now I can't boot on f2fs, just trying to make it work on 6.0.1 Mokee rom
im using ASUS Zenfone 5 as my daily driver since it was came out. before everything screwed up, im using XOSP 6.3 it was stable, but recently bugging. first time i unlock bootloader with ASUS official unlocker. My history of custom rom are CM12, Ressurection Remix LP, DirtyUnicorn, Cleanstock, XOSP. long short story. im trying tanks0412's stable Ressurection Remix, follow the precise of the instruction which is wiping System, dalvik, cache, data and internal. wiping internal which leads me to this problem, this problem has been occured 1-2 times when i did it and i succesfully fix it by flashing RR LP or somehow it fixed. but this time, it wont. its been 3 days.
- it shows error 7 when flash rom, tried to remove asserts line in the rom. wont work
- TWRP shows internal storage 0 MB. tried to remount system with terminal. wont work
- tried to update TWRP, flashing via flashboot. wont work
- tried to downgrade TWRP to 2.8.7.0 with Zenfone Asist. wont work
- tried to flash CM13.1 system image with Zenfone Asist. says okay, everything fine in bootloader. reboot to recovery, says no os installed. Cant boot to system.
Device info =
ASUS Zenfone 5
- 8 GB internal storage
- 32 GB external storage
- 2 GB RAM
- ASUS T00J/F (i forgot)
- A500CG
- TWRP 3.0.M2-0
this is my first thread. correct me if im wrong
PLEASE HELP:crying:
Same problem
I'm having the same problem.. Did you find any solution for that?
Has anyone fixed this prob yet? Im facing it right now and it say failed to mount system data and cache.
earl0325 said:
Has anyone fixed this prob yet? Im facing it right now and it say failed to mount system data and cache.
Click to expand...
Click to collapse
Did you guys tried formatting data ? Don't wipe data but format data . I ran into this problem once this fixed the problem.
@Arrvinkumar
Boomshiva said:
Did you guys tried formatting data ? Don't wipe data but format data . I ran into this problem once this fixed the problem.
@Arrvinkumar
Click to expand...
Click to collapse
I tried that also stil facing the same errors.
Try this steps carefully :
1. Wipe cache, dalvic cache, system, data and internal storage.
2. After wiping press format data and then type "yes" .
3. After formating data, now go to install and flash the ROM you want with gapps.
4. After flashing rom and gapps now reboot system.
5. First boot will take some time.
(Note: keep in mind that after wiping cache,dalvik,system,data,internal you have to do format data (which you will see in bottom right corner of wipe section) )
Whenever I install new custom rom, i use only these steps. I never encounter these problems as i always format my data.
Try this things,hope you will use your device.
Sent from my Asus ZenFone 5 (A500CG) using XDA Labs
juyel92 said:
Try this steps carefully :
1. Wipe cache, dalvic cache, system, data and internal storage.
2. After wiping press format data and then type "yes" .
3. After formating data, now go to install and flash the ROM you want with gapps.
4. After flashing rom and gapps now reboot system.
5. First boot will take some time.
(Note: keep in mind that after wiping cache,dalvik,system,data,internal you have to do format data (which you will see in bottom right corner of wipe section) )
Whenever I install new custom rom, i use only these steps. I never encounter these problems as i always format my data.
Try this things,hope you will use your device.
Sent from my Asus ZenFone 5 (A500CG) using XDA Labs
Click to expand...
Click to collapse
I still have the error after trying your guide.
Failed to mount '/system' (invalid argument)
Failed to mount '/data' (invalid argument)
Failed to mount '/cache' ( invalid argument)
I badly need to fix this so i can use my phone again
earl0325 said:
I still have the error after trying your guide.
Failed to mount '/system' (invalid argument)
Failed to mount '/data' (invalid argument)
Failed to mount '/cache' ( invalid argument)
I badly need to fix this so i can use my phone again
Click to expand...
Click to collapse
Okay.
First check weather its mounted or not.
To do this go to twrp recovery mode, select Mount and check [√] every option. After that try to flash the rom again. It seems like your system,data and cache is not mounted. See if that helps or not.
Sent from my Asus ZenFone 5 (A500CG) using XDA Labs
juyel92 said:
Okay.
First check weather its mounted or not.
To do this go to twrp recovery mode, select Mount and check [√] every option. After that try to flash the rom again. It seems like your system,data and cache is not mounted. See if that helps or not.
Sent from my Asus ZenFone 5 (A500CG) using XDA Labs
Click to expand...
Click to collapse
It is not mounted and i cannot mount it on the TWRP>mount. Even though I pressed it, it doesnt [√]
earl0325 said:
It is not mounted and i cannot mount it on the TWRP>mount. Even though I pressed it, it doesnt [√]
Click to expand...
Click to collapse
Which version of twrp you are running?
juyel92 said:
Which version of twrp you are running?
Click to expand...
Click to collapse
Im on twrp 3.0m4.0
earl0325 said:
Im on twrp 3.0m4.0
Click to expand...
Click to collapse
Do one thing just revert back to stock ROM. After that root it again, unlock bootloader and install latest twrp and flash the custom ROM again.
juyel92 said:
Do one thing just revert back to stock ROM. After that root it again, unlock bootloader and install latest twrp and flash the custom ROM again.
Click to expand...
Click to collapse
I cant even revert to stock rom because when i flash fastboot.img and recovery.img then i try to enter recovery it leads me to twrp not the stock. Btw im the one your helping in the RR Nougat thread of tank
In twrp go to advanced -> select data -> change filesystem type and change it to f2fs and then ext4 after that. Do that with all the partitions
Adrao123 said:
In twrp go to advanced -> select data -> change filesystem type and change it to f2fs and then ext4 after that. Do that with all the partitions
Click to expand...
Click to collapse
Still didn't fixed the problem sir.
earl0325 said:
I tried that also stil facing the same errors.
Click to expand...
Click to collapse
Flash original kernel with adb command. hope u fix it
Kevin [email protected] said:
Flash original kernel with adb command. hope u fix it
Click to expand...
Click to collapse
Whre can i get the original kernel and can u give me the code yo input to flash kernel? Thanks ill try your recommendation.
im facing the sam problem too.. anyone can help???
kurzwelll said:
im facing the sam problem too.. anyone can help???
Click to expand...
Click to collapse
In your twrp does it also say failed to mount /system,/data, and /cache (invalid argument)
earl0325 said:
In your twrp does it also say failed to mount /system,/data, and /cache (invalid argument)
Click to expand...
Click to collapse
yess,, i face the same problem too.. i have trying install every rom but nothing change,, it just failed prosses after all... everything is "failed to mount" in twrp
hi all
after flashing a new version of TWRP recovery i get this error message :
failed to mount /preload invalid argument SM-G950F
but so far everything seems to be working.
any idea like how to fix this issue ?
thanks
*current rom = horizonROM - OneUI v4.4 S8/S8+/N8 Exynos
kfirg14 said:
hi all
after flashing a new version of TWRP recovery i get this error message :
failed to mount /preload invalid argument SM-G950F
but so far everything seems to be working.
any idea like how to fix this issue ?
thanks
*current rom = horizonROM - OneUI v4.4 S8/S8+/N8 Exynos
Click to expand...
Click to collapse
Depending on twrp version you could try this
In twrp
Wipe menu
Advanced wipe menu
Select preload
Swipe to wipe
spawnlives said:
Depending on twrp version you could try this
In twrp
Wipe menu
Advanced wipe menu
Select preload
Swipe to wipe
Click to expand...
Click to collapse
i have TWRP 3.3.1.2
its works ! thanks !
kfirg14 said:
i have TWRP 3.3.1.2
just swipe to wipe (preload) and then reboot system ?
Click to expand...
Click to collapse
Yes
If you have issues then under mount menu select preload then repeat the process.
From what I can gather I think the preload section contains Samsung smart switch programs.
Note: If interested there new twrp version
spawnlives said:
Yes
If you have issues then under mount menu select preload then repeat the process.
From what I can gather I think the preload section contains Samsung smart switch programs.
Note: If interested there new twrp version
Click to expand...
Click to collapse
its works fine thanks!
about TWRP= What is the difference between the versions ? the new one is 3.4.0
kfirg14 said:
its works fine thanks!
about TWRP= What is the difference between the versions ? the new one is 3.4.0
Click to expand...
Click to collapse
http://twrp.me/site/update/2020/06/24/twrp-3.4.0-0-released.html
installed.
thanks!
I am not able to select the preload option under mount in twrp and eve not able to find preload option under wipe option
And always get this one problem - unable to mount preload error 7 and not I am totally stuck can anyone please help
Vaidik.P said:
I am not able to select the preload option under mount in twrp and eve not able to find preload option under wipe option
And always get this one problem - unable to mount preload error 7 and not I am totally stuck can anyone please help
Click to expand...
Click to collapse
What version of twrp are you using?
spawnlives said:
What version of twrp are you using?
Click to expand...
Click to collapse
Twrp version 3.2
Vaidik.P said:
Twrp version 3.2
Click to expand...
Click to collapse
Use latest twrp
Edit:
twrp for S8 exynos version
Download TWRP for dreamlte
Download TWRP Open Recovery for dreamlte
dl.twrp.me
.img file - flash with twrp reboot back into twrp
.img.tar - use odin to flash
hi guys
I'm having a problem with twrp, I will upload a new version, but there is no new version. The error I get is:
Failed to mount '/preload' (Invalid argument )
my device: smg610f (samsung galaxy j7 prime)
please help me guys and sorry for my bad english
FİLANTROPO said:
hi guys
I'm having a problem with twrp, I will upload a new version, but there is no new version. The error I get is:
Failed to mount '/preload' (Invalid argument )
my device: smg610f (samsung galaxy j7 prime)
please help me guys and sorry for my bad english
Click to expand...
Click to collapse
have you to tried this
failed to mount /preload = error
hi all after flashing a new version of TWRP recovery i get this error message : failed to mount /preload invalid argument SM-G950F but so far everything seems to be working. any idea like how to fix this issue ? thanks *current rom =...
forum.xda-developers.com
spawnlives said:
have you to tried this
failed to mount /preload = error
hi all after flashing a new version of TWRP recovery i get this error message : failed to mount /preload invalid argument SM-G950F but so far everything seems to be working. any idea like how to fix this issue ? thanks *current rom =...
forum.xda-developers.com
Click to expand...
Click to collapse
no preload in advanced wipe menu
is ''/preload'' installable like ''/vendor'' ? i had vendor problem a while ago and I solved it by installing a zip named ''Exynos7870_CreateVendor_2.0''.
also i have another problem, i updated my twrp 2.3 to 3.6.0_9-0 version and now there is no Preload in Mount or Wipe>Advanced Wipe
can someone explain me what is preload and why that is necessary in specific situations????
thanks
(sorrry for me bad englanD)
FİLANTROPO said:
hi guys
I'm having a problem with twrp, I will upload a new version, but there is no new version. The error I get is:
Failed to mount '/preload' (Invalid argument )
my device: smg610f (samsung galaxy j7 prime)
please help me guys and sorry for my bad english
Click to expand...
Click to collapse
¿lo pudiste arregla? / could you fix it?
How is the problem solved then I go to wipe and look for where it says preload, but if I don't see that option then what do I wipe everything?
How can I solve it, can you explain step by step please, I am a beginner in the custom rom and yesterday I got screwed when I was trying to install magisk and a multi nose file, I had to press the other one because I saw a video installing it, it seems that it was not compatible
I also have this error, any solution?