Database Users

Wing locking itself

I swear I did not change any settings, but starting yesterday my Wing would just lock itself when the screen shuts off. Anyone know how to disable this? Thanks
*edit*
another odd thing I noticed - I don't have to unlock when the phone's charging. very weird.

what programs are you using? If you hold down the end key for a second, the phone will lock. Maybe you are accidentally bumping it when you put it in your pocket or case.

Sorry I wasn't more specific... I'm running ttran's OpenTouch 3.0. when I turn on the screen (using the power button) I need to press unlock twice to get to the main menu. It's annoying and I'd like to get rid of it. idk... I didn't change anything and it just randomly started happening yesterday. help?

I agree with you PharmacySchool...I'm running Ttran's 3.0 ROM myself and the "locked" feature pop-up on me this afternoon, out of the blue. It is very annoying and I'm not sure what caused it to start happening. Was getting an address out of the contacts list, X'ed out of contacts once finished, clicked the power button to turn the screen off...next time I went to use the phone, it magically was locked and has been since. A real pain to have to hit the unlock button twice just to use the phone. Have played around a little with it, but no success on correcting the problem yet.

Make sure you're not overclocking the phone. This can cause lock ups if the CPU overheats or if it doesn't get the required voltage or for other reasons.

The lock I'm referring to and I believe PharmacySchool...is like a "key lock". How some phones have an option to lock the keys so it can't accidentally call someone if numbers get pressed by mistake or while in your pants pockets. Nothing to do with the CPU or it being overheated. All you have to do is press the button to turn the screen light off and instantly turn it back on...it's locked. You have to hit the "unlock" button on the bottom left hand corner and the tap the unlock button on the screen. After doing such...you can once again use your phone.

I have the answer!!!
pharmacyschool said:
I swear I did not change any settings, but starting yesterday my Wing would just lock itself when the screen shuts off. Anyone know how to disable this? Thanks
*edit*
another odd thing I noticed - I don't have to unlock when the phone's charging. very weird.
Click to expand...
Click to collapse
I'm pretty knew at this but I ran into the same problem and I figured out how to fix it. I don't know all the fancy wording so bare w/me. On your main screen touch and hold your battery symbol/ 6th option down says DeviceLock with a green check/ uncheck that **** and your good to go.
NOW someone PLEASEEEEE create a slide 2 "answer" not a slide 2 lock. I am so tired of my phone answering its self in my pocket when I don't want it to.

A_C 's S2U2 has a slide to answer feature..... You should check it out.

nextpimp said:
A_C 's S2U2 has a slide to answer feature..... You should check it out.
Click to expand...
Click to collapse
I've installed S2U2-0.2-WM5 with Touch It v2.3 and had problems. I think I remember it having a slide to answer but I also remember it answering with the green button as well. Maybe there was a way to disable it but I don't know how.
Does it work better Open Touch v3.0. because thats what I'm running now.

WOW... thats an OLD version.... that version should not have the slide to answer.....Current Version is 0.99p. It can be found in the development and hacking forum. You'll need to enable the S2A feature with the settings program...Man the apps come a LONG way since your version...We got animated gif support, Random still backgrounds, an exceptions list so voice dialers will work properly and internet browsers will stay alive... Just try the new version.

midas1200 said:
I'm pretty knew at this but I ran into the same problem and I figured out how to fix it. I don't know all the fancy wording so bare w/me. On your main screen touch and hold your battery symbol/ 6th option down says DeviceLock with a green check/ uncheck that **** and your good to go.
NOW someone PLEASEEEEE create a slide 2 "answer" not a slide 2 lock. I am so tired of my phone answering its self in my pocket when I don't want it to.
Click to expand...
Click to collapse
Midas, that fixed it. thanks a lot. I owe ya one.

nextpimp said:
WOW... thats an OLD version.... that version should not have the slide to answer.....Current Version is 0.99p. It can be found in the development and hacking forum. You'll need to enable the S2A feature with the settings program...Man the apps come a LONG way since your version...We got animated gif support, Random still backgrounds, an exceptions list so voice dialers will work properly and internet browsers will stay alive... Just try the new version.
Click to expand...
Click to collapse
NICE!!!!! Works good so far. Now I won't be divorced! LOL

WM6.5 lock screen delay fix

I want to start this threat to put together information in order to sort out why the device lock delay (see below) appears and how to solve it.
wm6.5 device lock app has changed from "tap here and next there" to a slider style like app you know from s2u2.
problem:
device lock is enabled
Code:
HKCU\ControlPanel\BackLight\AutoDeviceLockEnable=1
wake up the device by short pressing the power button
device lock screen is displayed instantly
it takes ~2 seconds until the slider of the device lock screen is activated and can be slided.
if you use device lock it becomes really annyoing.
there are some threads about this like this one, but the solution is not working on a Touch HD.
can anybody sched some light onthe problem why and where it appears or maybe someone already found a solution.
please post any useful information.
please do not post tips like use s2u2 or any other locking app - I do not want to use them.

the only thing i can thing of is use s2u2 or any other locking app

egoist6 said:
please do not post tips like use s2u2 or any other locking app - I do not want to use them.
Click to expand...
Click to collapse
cookiemonster55 said:
the only thing i can thing of is use s2u2 or any other locking app
Click to expand...
Click to collapse
cookiemonster, either you didn't read his post or you're a sort of a jerk.
And yes, in response to the poster, I have the same problem.

Zoltair Wright said:
cookiemonster, either you didn't read his post or you're a sort of a jerk.
And yes, in response to the poster, I have the same problem.
Click to expand...
Click to collapse
latest build 23001 still has this annoying delay

Iv noticed this too... The biggest annoyance for me is you turn the device on and the backlight isnt very bright, makes it near impossible to see the screen in daylight. Is it possible to have the backlight come on full when you press the power button?

i have this problem too. i think it is a serious bug of wm6.5
just hoping it will be fixed when the official release come out.

god i thought i was the only one, something about my config...
and i was exited about the new 6.5 lock screen,
but then it works like all the other M$ 6.5 sh!t, it doesn't
had to switch away from it

May be this help you:
http://forum.xda-developers.com/showthread.php?t=527219

A1983 said:
May be this help you:
http://forum.xda-developers.com/showthread.php?t=527219
Click to expand...
Click to collapse
thanks for your help - but that was the solution i am talking about in my first post and unfortunately does not work.

also find this intensely annoying! if you look, on my hd, in the top left corner a small windows flag appears to indicate that the slider is locked, it disappears once the slider is active, and there is a definite exact time out, i dont think its random or a load time
hope this is sorted cos its rubbish!
regards
mat

What I've done that got rid of most of the delays regarding the lock screen on my Xperia:
I got 6 cpr files from my device's /Windows directory: LS_LockScene_xxxxxxx.cpr, LS_AlarmScene_xxxxxxx.cpr and LS_PhoneAlertScene_xxxxxxx.cpr. Get files that fit the resolution of your device, they are in pairs for portrait and landscape
opened each one of them in a text editor (they are XMLs inside)
removed all "ControlSequence" sections from them (those sections are small (like 4 entries) and big (up to 21 entries). These sections are animations of arrows. Arrows will still be there after that, they just won't animate.
uploaded cpr files back to /Windows, overwriting originals
soft-reseted.
Hope it works on your devices too

lemat1 said:
also find this intensely annoying! if you look, on my hd, in the top left corner a small windows flag appears to indicate that the slider is locked, it disappears once the slider is active, and there is a definite exact time out, i dont think its random or a load time
hope this is sorted cos its rubbish!
regards
mat
Click to expand...
Click to collapse
yeah. and with 6.5 23003 onwards in the top right corner an "X" (for close) appears. only when it goes off you can access the slider.
it seems as if an app is started.

pikipirs said:
What I've done that got rid of most of the delays regarding the lock screen on my Xperia:
I got 6 cpr files from my device's /Windows directory: LS_LockScene_xxxxxxx.cpr, LS_AlarmScene_xxxxxxx.cpr and LS_PhoneAlertScene_xxxxxxx.cpr. Get files that fit the resolution of your device, they are in pairs for portrait and landscape
opened each one of them in a text editor (they are XMLs inside)
removed all "ControlSequence" sections from them (those sections are small (like 4 entries) and big (up to 21 entries). These sections are animations of arrows. Arrows will still be there after that, they just won't animate.
uploaded cpr files back to /Windows, overwriting originals
soft-reseted.
Hope it works on your devices too
Click to expand...
Click to collapse
great. that helped a lot!
now the lock screen is flickering shortly and the whole lock screen slides in once more from the bottom to the top but then the slider is instantly accessible.
from a time perspective a great improvement!

update:
basically you can delete the whole layer
Code:
<Layer ID="SlidePath" >
...
</Layer>
which removes the animation of the arrows and the arrows themselves.
do not delete this section if you do not know in which direction to slide the button
however, the delay is still ~1 second. but i think i can live with that allthough it is annoying to wait one stupid second to proceed

the delay you get when recieving a call with lockscreen on is caused by the slide to answer feature of alot of the new dialers. it conflicts with the popup call answer screen with wm 6.5. to fix this can find a dialer that doesnt have slide to answer feature. the backlight problem came from backlight.dll in the kaiser, using a new one from stock rom now and it works perfect

If you enable the enter a pin number after slide, there is no delay at all. I know this isnt a solution i hate entering a pin. however, i have a felling the pin app is running in the background and thus you dont get the flicker where it flicks from Start menu back to the lock app. Hence if you could create a dummy pin app, it could work to stop the delay.

twopumpchump said:
the delay you get when recieving a call with lockscreen on is caused by the slide to answer feature of alot of the new dialers. it conflicts with the popup call answer screen with wm 6.5. to fix this can find a dialer that doesnt have slide to answer feature. the backlight problem came from backlight.dll in the kaiser, using a new one from stock rom now and it works perfect
Click to expand...
Click to collapse
thanks for your reply. but i also have the delay when simply waking up the device by pressing the power button (without receiving a call)

xternal said:
If you enable the enter a pin number after slide, there is no delay at all. I know this isnt a solution i hate entering a pin. however, i have a felling the pin app is running in the background and thus you dont get the flicker where it flicks from Start menu back to the lock app. Hence if you could create a dummy pin app, it could work to stop the delay.
Click to expand...
Click to collapse
that's true. i replaced LS_SimplePinScene_480x800.cpr with an empty one and allthough not using pinlock, the lock app did not work at all.

What if we designed something where when you slide it calls a mortscript or something and enters 0000+OK to by pass the pin screen (assuming you set pin to 0000). Then you edit the Pin screen so it is just a clear page, so you dont even see the pin screen flash up.
Not sure if this is at all possible as im not a programmer. Just a thought

xternal said:
What if we designed something where when you slide it calls a mortscript or something and enters 0000+OK to by pass the pin screen (assuming you set pin to 0000). Then you edit the Pin screen so it is just a clear page, so you dont even see the pin screen flash up.
Click to expand...
Click to collapse
good idea. maybe someone can change LS_SimplePinScene_480x800.cpr so that it does not expect the pin from screen but is embedded directly into the cpr file?
can anybody who has a better understanding of cpr files or the lock app give us some tips?
xternal said:
Not sure if this is at all possible as im not a programmer. Just a thought
Click to expand...
Click to collapse
me neither

screen lock

unlock the screen is straight forward, how to lock it is the question! anybody can help?

A quick press on the power button will do the trick!

haha...tt's simple...tx a million!

Yeah! No problem!

Don't want to create a whole new thread for this as its probably a simple answer, but is there a way to lock the screen with numbers or something similar to the Sense UI? I just ask as I haven't seen any security on the lock screen so anyone can get in? There must be a way to lock it so only you can open it?

AFK_Matrix said:
Don't want to create a whole new thread for this as its probably a simple answer, but is there a way to lock the screen with numbers or something similar to the Sense UI? I just ask as I haven't seen any security on the lock screen so anyone can get in? There must be a way to lock it so only you can open it?
Click to expand...
Click to collapse
Well yeah. You can set a lock pattern that works in the same way. Kind of. It's in settings -> Security and at the top!

Transparent screen lock

Not sure this is in the right forum since it's really a general WM question, but anyway...
I want to be able to view my today screen since it contains all my appointments etc even when the screen is locked.
I guess a transparent screen lock would solve the problem, but I havent found one yet.
Is there one?
Another solution would be something that kept the screen locked until I press the power button. Then it would be easy to unlock but still locked when it's not in use so I dont make calls etc without knowing it.

try s2u2 http://www.xda-developers.com/windows-mobile/s2u2-new-version-v2-30/ it will show your information on the lock screen

Martin25 said:
try s2u2 http://www.xda-developers.com/windows-mobile/s2u2-new-version-v2-30/ it will show your information on the lock screen
Click to expand...
Click to collapse
That's not good enough. I have everything specified just as I want it in my today screen and to find a custom lock screen that matches that is impossible to find. A transparent lock screen or a lock screen that gets unlocked automatically when I press the power button would solve it perfectly.

use the old (standart)lockscreen. like wm6.1
it is your homescreen with a unlock softbutton.
(i use wm6.1 and now i don't know why everybody is needing blown up lockscreens, when the old one was best )

aber82 said:
use the old (standart)lockscreen. like wm6.1
it is your homescreen with a unlock softbutton.
(i use wm6.1 and now i don't know why everybody is needing blown up lockscreens, when the old one was best )
Click to expand...
Click to collapse
How do I get the old style? If I show the lock object on the today screen it will still show the new 6.5 lock screen when I lock the phone.

i do not know how to get it back , but i know that it is possible.
i hope someone can show you the way.

aber82 said:
i do not know how to get it back , but i know that it is possible.
i hope someone can show you the way.
Click to expand...
Click to collapse
Found it: http://www.modaco.com/index.php?s=&showtopic=293605&view=findpost&p=1207481
Seems to work, thanks. Still interested in other soultions, but this will probably be fine otherwise.

or install Cookie Home Tab
it has customizable lockscreens, emphasis on multiple kinds of locks.
each has the ability to move the parts around like CHT always does. and you can make it fit your every need !

gmanfuzing said:
or install Cookie Home Tab
it has customizable lockscreens, emphasis on multiple kinds of locks.
each has the ability to move the parts around like CHT always does. and you can make it fit your every need !
Click to expand...
Click to collapse
Does that requier HTC Sense? I'm using a clean rom without any HTC software, since I want to use the old today screen. This is very important since I use TodayAgenda.

Hi all, got a question

I looked and searched (a few forums also) and cant find an answer. I have a TMOUS HD2 with their new ROM freshly installed (yesterday) and when I get a text message it will show the message but the only option I have is to "Hide" it. I tried clicking on it and everywhere else but it wont open the message unless I go to "Messages" so is there a reg edit I can do to get it to show "open" instead of hide...Thx...Tj
P.S. I would rather not install any programs but would like to work with what the phone has.

Hmm am I the only one with this problem?

no this isn't exactly a problem. This is a feature that is on the phone where if your at your lock screen or your display screen iss hut off thats what shows when you get to the lock screen. It's so you can view your text and who it's from before you unlock your phone and go into their threaded message.
I'm sure there is a way to disable it via reg but not sure.

sherlockpwnz said:
no this isn't exactly a problem. This is a feature that is on the phone where if your at your lock screen or your display screen iss hut off thats what shows when you get to the lock screen. It's so you can view your text and who it's from before you unlock your phone and go into their threaded message.
I'm sure there is a way to disable it via reg but not sure.
Click to expand...
Click to collapse
OK but I do not have the screen locked. I can see the message and who its from but to open or reply I have to go to messages because the only option is to "hide" it...Tj

as with all things it can glitch. if you have your lock screen disabled but then you hit your right button for end call to turn off the display then touch another button to bring it back it could possible bring that up. I will see if I can find someone that knows the answer.

sherlockpwnz said:
as with all things it can glitch. if you have your lock screen disabled but then you hit your right button for end call to turn off the display then touch another button to bring it back it could possible bring that up. I will see if I can find someone that knows the answer.
Click to expand...
Click to collapse
OK thanks a bunch...Tj