please help September update - AT&T Samsung Galaxy S7 Edge Questions & Answers

can someone post the update the sd slot on my phone stopped working after trying at least 3 microsd cards, i decided maybe if i flashed the older firmware it would start working again needless to say it didnt work and now my phone wont boot and everytime i try to flash a firmware i keep getting an error that says "sw rev check fail : {abort}fused 4 < binary 2" can someone help me out on this please

The good news is it is fixable, you just need the exact firmware you were using before (or newer.) It sets a version number in the bootloader and the firmware you downloaded has a lower version.
Unfortunately, I've been trying to find that same new firmware for 3 days now with no luck. (Keep reading though!) I'm trying to switch a tmo over to att, and since its going to be a work phone they insist it have the att firmware in 'official' mode - fortunately, they don't care what the paint on the back says.
If someone with that firmware posts the 'Firmware' page from Phone INFO ★Samsung★ I might be able to get it. (And if I do, I'll send it over - much more reliable than the official recovery method.)
You may have already lost everything on the phone, but I hope you were prepared for that. You might be able to fix the softbrick (resulting in it being 100% stock) with 'samsung smart switch' (win/mac) using 'emergency device recovery'. It will ask for your model number (SM-G935A) and serial # and then it will download and odin-flash the firmware for you.
I say 'might' because I tried that for the tmo phone last night and it eventually just crashed.
Forgive any weird disjointed text, it is early in the morning.. if some part of that didn't make sense let me know.

Disconn3ct said:
Unfortunately, I've been trying to find that same new firmware for 3 days now with no luck.
Click to expand...
Click to collapse
The firmware is available, but the source is questionable. As you discovered, ATT does not post their ROMs (just one more reason why they are THE Evil Empire).
Most are getting their files from a Persian site:
http://dl.pars-hamrah.com/ (switch to English)
And the G935A PI2 files are here:
http://dl.pars-hamrah.com/index.php...ATT4API2_USA ATT Android 6.0.1_4File Firmware
Premium fee is required for download and I have not looked into the cost. I have read that they are legit, but who knows...

Found it on clangsm.com as well, which is just as sketchy. I'll see what I can do, might have enough info with the filenames (and might not..)
Edit: Might just be too early in the morning (I'll try later tonight) but the info I need is definitely on that page from the phone info app. (I'm not doing anything magic, just trying a couple of apps.)
Alternately if someone wants to PM me an AT&T serial number (not the imei! always think REALLY hard about saying no if anyone asks for that!) I can see about listening in on the smart switch recovery.

It be great if you found it. Be nice to start from Sept firmware.
Sent from my SAMSUNG-SM-G935A using Tapatalk

Disconn3ct said:
Found it on clangsm.com as well, which is just as sketchy. I'll see what I can do, might have enough info with the filenames (and might not..)
Edit: Might just be too early in the morning (I'll try later tonight) but the info I need is definitely on that page from the phone info app. (I'm not doing anything magic, just trying a couple of apps.)
Alternately if someone wants to PM me an AT&T serial number (not the imei! always think REALLY hard about saying no if anyone asks for that!) I can see about listening in on the smart switch recovery.
Click to expand...
Click to collapse
I'll text it to you later... Mine got buggered after the att update which I stupidly said yes to half asleep at 3am in the morning, the update does not play well with rooted phones, just hangs at the att logo and cooks the phone (got real hot real fast). I bought it last week after I melted my work phone.
Crap, i'll pm it it here, I lost your number with the melted phone.

Lol. Thanks! (Got it.)
I'll horribly abuse my w10 vm tonight and try to capture the info. If not he can get me the other info (and if all of that fails I might be out of ideas but we'll see.)
Sent from my SM-N930T using Tapatalk

in the process of reflashing the new firmware right now can anyone let me know how to upload it?

msrecinto666 said:
in the process of reflashing the new firmware right now can anyone let me know how to upload it?
Click to expand...
Click to collapse
PM sent. You rock
Sent from my SM-N930T using Tapatalk

jvanbrecht said:
I'll text it to you later... Mine got buggered after the att update which I stupidly said yes to half asleep at 3am in the morning, the update does not play well with rooted phones, just hangs at the att logo and cooks the phone (got real hot real fast). I bought it last week after I melted my work phone.
Crap, i'll pm it it here, I lost your number with the melted phone.
Click to expand...
Click to collapse
Can you PM it to me to. I need to start all over.
Sent from my SAMSUNG-SM-G935A using Tapatalk
---------- Post added at 04:30 PM ---------- Previous post was at 04:14 PM ----------
Disconn3ct said:
PM sent. You rock
Sent from my SM-N930T using Tapatalk
Click to expand...
Click to collapse
Can you PM it to me too. Im having so many issues.
Sent from my SAMSUNG-SM-G935A using Tapatalk

In for FW. Please do share. Thanks.

Getting it down and flashing it now (just got home) and then I'll shove it online for the public.
Don't forget, msrecinto666 is the one to thank! I'm just finding it a (hopefully safe, hopefully fast) place to live..
Edit to update: It is flashing successfully! I'll have a url shortly.
---------- Post added at 07:44 PM ---------- Previous post was at 06:57 PM ----------
I might have "found" those files on mega, Dropbox and mediafire. I know they all kinda suck but it's what I've got right now. I'll add the links as soon as I "confirm" them.
The urls have been sent to msrecinto666 to post for the karma [emoji2]
Sent from my SM-N930T using Tapatalk

snovvman said:
In for FW. Please do share. Thanks.
Click to expand...
Click to collapse
will share in a bit

Mega links:
https://mega.nz/#!QgVgSKKB!fOoreX2W4XeNmrtxljvK4kH9NLadwa8K4jojJ8Zf3iM
https://mega.nz/#!c0c0DSRb!IEv35YoCqlPP3EfNz4snxcS0PPkrgj1NHXPUEWqevts
https://mega.nz/#!oxlimRya!wAoiOSotwGtvXMf5hkxsjuX7XQ-jxRjWSZm1Bh9oU0s
https://mega.nz/#!gtly2D6a!bE0SyKyweYVu4TEPTWuw40SgOdd02J4NwkNcRgn5hr0
Dropbox folder:
https://www.dropbox.com/sh/2wcu3011gturi5n/AACaadIKAzkh2aq_nSlru7MXa?dl=0
Mediafire:
https://www.mediafire.com/folder/okoe3iw1674st/XDA

Disconn3ct said:
Mega links:
Dropbox folder:
Mediafire if it ever finishes uploading:
Click to expand...
Click to collapse
Excellent! "Thanks" all around, handing them out like candy!! :good::good::good::highfive::highfive::highfive:

marcusva79 said:
Can you PM it to me to. I need to start all over.
Sent from my SAMSUNG-SM-G935A using Tapatalk
---------- Post added at 04:30 PM ---------- Previous post was at 04:14 PM ----------
Can you PM it to me too. Im having so many issues.
Sent from my SAMSUNG-SM-G935A using Tapatalk
Click to expand...
Click to collapse
Missed this the first time through but you should be able to use Odin on the files posted above.
Sent from my SM-N930T using Tapatalk

Confirmed worked flawlessly with Odin3 v3.12

My steps for updating and saving data/config:
0) Unfreeze all system apps
1) FlashFire backup to external SD card, make sure to backup /data and /internal storage along with /system in case you need to roll back.
2) Boot to Download, use Odin 3.12 (the unmodified version) to flash the 4 OE FW files
3) Let the phone fully boot, go through the basic setup, go to settings, enable USB/ADB debug and unknown sources
4) Reboot into Download, flash Eng bootloader with the PrinceComsy Odin
5) After phone reboots and starts, run root
6) "Enable SuperSU during boot"
7) Install FlashFire, grant root
8) Flash fixes/debloat, let the phone boot, reboot for good measure (I find that the extra reboot contributes to success)
9) After reboot, flash Xposed, etc.
10) FlashFire restore backup
11) After the phone boots, refreeze system apps
12) Profit.

OMG!
I can't even begin to thank you for sharing these files. I thought I was going to be without a phone for a little while. You are clutch!

Did Sammobile stop carrying USA firmware? It looks like there is no good way to download and manually update the firmware on any USA Samsung devices now.
I was looking for this firmware and had no luck, so I went and check a few other devices I have and NONE of them are on Sammobile anymore... WTF is going on. why would they pull all of the USA firmware off their site and not provide any news release about it.

Related

Verizon LG G Pad 8.3 VK810 Lollipop OTA VK81035A

It's here folks, Lollipop for Verizon's iteration of the LG G Pad 8.3, the VK810 (code name "Altev"). You can start downloading and installing via Settings - System Updates - Check for Updates. I don't have the time to update today, but please tell me how it comes out for you.
Modders, rooters, and ROMans (ROMers?) out there, I'd love to hear if you keep root with OTA Survival Mode or Chuck Norris mode enabled in your super user app (SuperSU, SuperUser, etc...) or if you can find the file ( @roirraW "edor" ehT you seem to be the king of KDZs for our device) to flash via TWRP.
Thumbs up if this post was helpful and don't forget to vote on that poll.
***Reserved for bug reports, issues, and fixes***
I will try to keep this up to date as they come in.
I used the kdz in normal mode and lost root.
I was waiting for someone else to make a centralized thread for issues, so I wouldn't have to maintain it. ?
Under 35A_08, I can't seem to expand notifications in the pulled down notification shade. You can expand them at least on an insecure lock screen (swipe) and it seems that what you expand there are then expanded in the notification shade too. I think this survives a reboot.
Revoe said:
***Reserved for bug reports, issues, and fixes***
I will try to keep this up to date as they come in.
Click to expand...
Click to collapse
Already rooted without downgrading. Check my guide in general section.
In your poll, add the option. Already running , debloated, rooted and working on recovery.
Took the OTA. Lost root. Trying to decide whether I need to root again.......
There's an official lollipop update for 8.3 VZW? Missed that
Sent from my Nexus 6
Do I need a Verizon SIM in it to pull the OTA?
I've tried both the update button in settings and the "Verizon Wireless Software Upgrade Assistant" PC client.
Tmo SIM doesn't work, VZW does
Fortunately I had an active VZW SIM out of a Galaxy Tab 2.
It asked me to download with it in, and would not let me see it with a T-Mobile SIM. Kept saying I was up to date.
Put the VZW SIM back in and it let me get it. Downloading over WiFi now, just over 600 megs.
Sure they'll gladly send you the OTA with an active VZW SIM, probably hoping you'll use your data allotment to do it...
Typical VZW antics, which is why I'll never use Verizon. MAYBE if someone else paid for it, but I'd resist even then. Worst carrier IMHO except of course their coverage is great. I carry a PagePlus $10/120 days for emergencies, camping, etc.
But I digress...
How do you flash a kdz
---------- Post added at 01:48 PM ---------- Previous post was at 01:48 PM ----------
Rename it? Surely TWRP doesn't recognize it
I just noticed that " LG BACKUP" is no longer available on 5.0.2. Has anyone else seen this?
Sent from my VK810 4G using XDA Free mobile app
713brianp27 said:
How do you flash a kdz
---------- Post added at 01:48 PM ---------- Previous post was at 01:48 PM ----------
Rename it? Surely TWRP doesn't recognize it
Click to expand...
Click to collapse
Hi! Google for:
Code:
XDA LG Flash Tool 2014
Golfer_Ron said:
I just noticed that " LG BACKUP" is no longer available on 5.0.2. Has anyone else seen this?
Click to expand...
Click to collapse
Previous releases for the VK810 had LG Backup? I'm not saying they didn't, just if they did I never noticed it. Was it (originally) in the same place it is on the G3 (Settings / Backup & Reset)? It is in fact not available there on 35A_08, but I know at some point I looked there on 24A and didn't see it either - unless I only checked after I had debloated it and I took it out by mistake or not knowing.
Was it definitely available on 24A? Curious because on the G3 once I tried it, I noticed it sure was fast and easy, and might not trump Titanium Backup for all purposes, but certainly for my most common uses.
713brianp27 said:
How do you flash a kdz
Click to expand...
Click to collapse
It worked basically the same for me as the other LG devices I've seen (VS980 and V500), but with a different KDZ file of course.
1 - Download the VK810 35A KDZ file: http://forum.xda-developers.com/showpost.php?p=60857185&postcount=2
2 - Follow this guide to use the LG Flash Tool 2014: http://forum.xda-developers.com/showthread.php?t=2797190
Note: To put your VK810 into download mode, power it off, then hold the volume down button while you plug it into your PC. A small rectangle will appear in the middle of the screen that says "Download Mode".
Worked like a charm for me. yesterday.
Was it definitely available on 24A? Curious because on the G3 once I tried it, I noticed it sure was fast and easy, and might not trump Titanium Backup for all purposes, but certainly for my most common uses.[/QUOTE]
You may be right, it is that I use it on my G3s that I assumed it was on the VK810. I use it to transfer files and apps between devices, I remembered that I tried but failed to get Snapdragon Battery Guru to the VK810. Shame it does have it uses.
tallpaul02 said:
It worked basically the same for me as the other LG devices I've seen (VS980 and V500), but with a different KDZ file of course.
1 - Download the VK810 35A KDZ file: http://forum.xda-developers.com/showpost.php?p=60857185&postcount=2
2 - Follow this guide to use the LG Flash Tool 2014: http://forum.xda-developers.com/showthread.php?t=2797190
Note: To put your VK810 into download mode, power it off, then hold the volume down button while you plug it into your PC. A small rectangle will appear in the middle of the screen that says "Download Mode".
Worked like a charm for me. yesterday.
Click to expand...
Click to collapse
I thought it was a twrp flash. LG flash tool. Won't you lose root/recovery? I'd like to see a rooted twrp like they do in S5 vzw&art threads. Simple kernel swap..Voila
---------- Post added at 10:04 PM ---------- Previous post was at 10:02 PM ----------
If nobody posts one soon then I will.
Definitely no LG Backup for the last 3-4 OTAs, but I haven't owned it long enough to speak for the entirety of the software history. I know that this device has been hamstrung by some of the carriers' antics by not including some basics that the flagship phones enjoy like a full feature Quick Remote, the absence of LG Backup (which just may be the best BU short of Titanium), and the exclusion of baked in goodies like Dual Window and adjustable Emersive Mode (hides the nav bar on a per-app basis). I know DW fix can be found, but not sure about the others yet.
Golfer_Ron said:
You may be right, it is that I use it on my G3s that I assumed it was on the VK810. I use it to transfer files and apps between devices, I remembered that I tried but failed to get Snapdragon Battery Guru to the VK810. Shame it does have it uses.
Click to expand...
Click to collapse
Gotcha. Last I checked the SnapDragon Battery Guru wouldn't install from the Play Store on my G3's Lollipop, but I haven't checked lately and I don't recall if I tried just restoring it from Titanium Backup. I'll check again on the G3 and on this device in case it's changed (probably not), thanks for the reminder.
Sent from my VK810 4G
---------- Post added at 12:52 AM ---------- Previous post was at 12:52 AM ----------
713brianp27 said:
I thought it was a twrp flash. LG flash tool. Won't you lose root/recovery? I'd like to see a rooted twrp like they do in S5 vzw&art threads. Simple kernel swap..Voila
---------- Post added at 10:04 PM ---------- Previous post was at 10:02 PM ----------
If nobody posts one soon then I will.
Click to expand...
Click to collapse
See my ROM in my signature.
Sent from my VK810 4G
There's a whole lot of page flopping. Ended up @AFH once
---------- Post added at 06:23 AM ---------- Previous post was at 06:21 AM ----------
And a link to 4.2.2 aboot keeps bringing me to a page in a language I do not understand.
Is that newest kdz 5.0.2 or 5.1?
713brianp27 said:
There's a whole lot of page flopping. Ended up @AFH once
---------- Post added at 06:23 AM ---------- Previous post was at 06:21 AM ----------
And a link to 4.2.2 aboot keeps bringing me to a page in a language I do not understand.
Click to expand...
Click to collapse
Works for 60 people who downloaded the ROM so far. Try a different browser or try it on a PC. I only have one link to AFH. All the files you need are there at that link.
Upu said:
Is that newest kdz 5.0.2 or 5.1?
Click to expand...
Click to collapse
5.0.2
Sent from my VK810 4G

G935AUCS2APH1 NEW AT&T Bootloader?

Hey everyone, just an FYI. Update I haven't seen anywhere for the AT&T s7 Edge...
I managed to keep root and everything else. Just wanted to know if anyone else randomly had an update happen?
kobos311 said:
Hey everyone, just an FYI. Update I haven't seen anywhere for the AT&T s7 Edge...
I managed to keep root and everything else. Just wanted to know if anyone else randomly had an update happen?
Click to expand...
Click to collapse
Can you check which bootloader version it is please. Go into download mode/Odin mode and look for the thing that says either B2 or B3. If it says B2 it's still bootloader 2, if it says B3 it's bootloader 3. Report back ASAP. I would really like to know.
Ph0nysk1nk said:
Can you check which bootloader version it is please. Go into download mode/Odin mode and look for the thing that says either B2 or B3. If it says B2 it's still bootloader 2, if it says B3 it's bootloader 3. Report back ASAP. I would really like to know.
Click to expand...
Click to collapse
I will boot into D/L mode now and confirm, and screenshot my system info as well. I'll pull my log as well. It was weird how it happened. Will post details later. Will follow up with Bootloader v2 or v3 in a second.
kobos311 said:
I will boot into D/L mode now and confirm, and screenshot my system info as well. I'll pull my log as well. It was weird how it happened. Will post details later. Will follow up with Bootloader v2 or v3 in a second.
Click to expand...
Click to collapse
Allright fast response . This will be great if the bootloader is updated people stuck on t-mobile can come back now and such.
---------- Post added at 11:41 PM ---------- Previous post was at 11:24 PM ----------
kobos311 said:
I will boot into D/L mode now and confirm, and screenshot my system info as well. I'll pull my log as well. It was weird how it happened. Will post details later. Will follow up with Bootloader v2 or v3 in a second.
Click to expand...
Click to collapse
Was it updated? Not trying to be pushy at all but this is the first I'm hearing about this update and I'm really curious. Was it updated?
Ph0nysk1nk said:
Allright fast response . This will be great if the bootloader is updated people stuck on t-mobile can come back now and such.
Click to expand...
Click to collapse
AP SWREV: B2 (2,1,1,1,1) K1 S1
Let me know what else will be helpful. I've attached a screen also.
kobos311 said:
AP SWREV: B2 (2,1,1,1,1) K1 S1
Let me know what else will be helpful. I've attached a screen also.
Click to expand...
Click to collapse
Damn not bootloader 3 that sucks. thanks for checking. On another note im looking at the firmware details but it seems as if the actual firmware didn't update as it still says August. Maybe just a baseband update or a prep for a future update? Sucks though was hoping for a a B3 update. Thanks though
---------- Post added at 11:54 PM ---------- Previous post was at 11:51 PM ----------
kobos311 said:
AP SWREV: B2 (2,1,1,1,1) K1 S1
Let me know what else will be helpful. I've attached a screen also.
Click to expand...
Click to collapse
I must ask... how did you end up getting this update? i just checked but i dont have any updates.
Ph0nysk1nk said:
Damn not bootloader 3 that sucks. thanks for checking. On another note im looking at the firmware details but it seems as if the actual firmware didn't update as it still says August. Maybe just a baseband update or a prep for a future update? Sucks though was hoping for a a B3 update. Thanks though
Click to expand...
Click to collapse
It tried to update. Funny story is I accidently booted into recovery mode in lieu of bootloader mode by mistake so quickly changed buttons mid vibration and booted into dl mode instead of completing the update. No idea what completed or didn't.
kobos311 said:
It tried to update. Funny story is I accidently booted into recovery mode in lieu of bootloader mode by mistake so quickly changed buttons mid vibration and booted into dl mode instead of completing the update. No idea what completed or didn't.
Click to expand...
Click to collapse
Did you maybe just half of the update? Im pretty confused by all of this TBH. It just sounds so weird how you got this "update".
---------- Post added at 12:06 AM ---------- Previous post was at 12:00 AM ----------
kobos311 said:
It tried to update. Funny story is I accidently booted into recovery mode in lieu of bootloader mode by mistake so quickly changed buttons mid vibration and booted into dl mode instead of completing the update. No idea what completed or didn't.
Click to expand...
Click to collapse
Would there be a way i could replicate the process and get the update?
Ph0nysk1nk said:
Did you maybe just half of the update? Im pretty confused by all of this TBH. It just sounds so weird how you got this "update".
---------- Post added at 12:06 AM ---------- Previous post was at 12:00 AM ----------
Would there be a way i could replicate the process and get the update?
Click to expand...
Click to collapse
Trust me I was just as confused as you are now.,still am. Even tried to Odin to factory lol no dice. That's why I'll fetch my logs and see no idea what happened really just realized it when I couldn't get the factory reset to work. I was working on xposed and getting back up to date since I've been away from a Samsung for so long.
kobos311 said:
Trust me I was just as confused as you are now.,still am. Even tried to Odin to factory lol no dice. That's why I'll fetch my logs and see no idea what happened really just realized it when I couldn't get the factory reset to work. I was working on xposed and getting back up to date since I've been away from a Samsung for so long.
Click to expand...
Click to collapse
Hmmm not being able to odin back to stock is kinda scary TBH. It kinda sounds like the bootloader tried to upgrade or something since if the bootloader was still B2 it would flash fine.
Ph0nysk1nk said:
Hmmm not being able to odin back to stock is kinda scary TBH. It kinda sounds like the bootloader tried to upgrade or something since if the bootloader was still B2 it would flash fine.
Click to expand...
Click to collapse
That was my thinking. I had a few errors in ODIN, both versions. Also tried several versions of the firmwares from different locations. I got lucky. Hence my hastily FYI on here. Lol
kobos311 said:
Trust me I was just as confused as you are now.,still am. Even tried to Odin to factory lol no dice. That's why I'll fetch my logs and see no idea what happened really just realized it when I couldn't get the factory reset to work. I was working on xposed and getting back up to date since I've been away from a Samsung for so long.
Click to expand...
Click to collapse
To add to my last reply there is a rumor going around that ATT is going to update the bootloader VERY soon. I also started to dig around a little and found this http://forum.xda-developers.com/att-galaxy-s7/how-to/firmware-stock-sm-g930a-ph1-odin-files-t3458890 its a link to the PH1 firmware. Will you Download it and see if you can flash it? its your only option ATM anyway
---------- Post added at 12:25 AM ---------- Previous post was at 12:23 AM ----------
kobos311 said:
That was my thinking. I had a few errors in ODIN, both versions. Also tried several versions of the firmwares from different locations. I got lucky. Hence my hastily FYI on here. Lol
Click to expand...
Click to collapse
http://forum.xda-developers.com/att-galaxy-s7/how-to/firmware-stock-sm-g930a-ph1-odin-files-t3458890 I found offical PH1 firmware. so it's real not just fake. will you download it and see if you can flash it?
Ph0nysk1nk said:
To add to my last reply there is a rumor going around that ATT is going to update the bootloader VERY soon. I also started to dig around a little and found this http://forum.xda-developers.com/att-galaxy-s7/how-to/firmware-stock-sm-g930a-ph1-odin-files-t3458890 its a link to the PH1 firmware. Will you Download it and see if you can flash it? its your only option ATM anyway
---------- Post added at 12:25 AM ---------- Previous post was at 12:23 AM ----------
http://forum.xda-developers.com/att-galaxy-s7/how-to/firmware-stock-sm-g930a-ph1-odin-files-t3458890 I found offical PH1 firmware. so it's real not just fake. will you download it and see if you can flash it?
Click to expand...
Click to collapse
Umm, that's clearly not the edge model lol
kobos311 said:
Umm, that's clearly not the edge model lol
Click to expand...
Click to collapse
I know it's not the edge but the only thing you lose is the edge screen. It's fine though i understand you dont want to do it. it's a big risk ATM with no edge version of the firmware. Thanks for your time man
Ph0nysk1nk said:
I know it's not the edge but the only thing you lose is the edge screen. It's fine though i understand you dont want to do it. it's a big risk ATM with no edge version of the firmware. Thanks for your time man
Click to expand...
Click to collapse
LOL I just had a flashback to J tagging bricked phones for friends still have a skyrocket that's been jtagged about 10 times to help the development community.
Ph0nysk1nk said:
I know it's not the edge but the only thing you lose is the edge screen. It's fine though i understand you dont want to do it. it's a big risk ATM with no edge version of the firmware. Thanks for your time man
Click to expand...
Click to collapse
I'm having to manually titanium backup every system app and then Uninstall system app updates and reboot to get them to work properly blah
https://www.att.com/esupport/article.html#!/wireless/KM1086930
Now to just get a full stock rom to flash back too... Lol
I flashed the UU firmware, rerooted, fixed network settings and setup my kernel profiles runs wonderfully on that. Now to figure out how to enable WiFi calling with a patched csc
kobos311 said:
I flashed the UU firmware, rerooted, fixed network settings and setup my kernel profiles runs wonderfully on that. Now to figure out how to enable WiFi calling with a patched csc
Click to expand...
Click to collapse
Not that benchmarks mean a darn thing but..

DO NOT UPDATE FROM APGC TO API4... (If you want root...)

Tested right before replacing my N7 (v1)...
After upgrading to latest API4 "Green Battery" Update...
Confirmed:
- Unable to Odin Sprint "Root" Firmware...
- Unable to downgrade to APGC...
Result...
No root & stuck with API4... (Not bricked)
so... in other words... IF you want root... stay with APGC and simply wait for an API4 ROM... (with APGC bootloader)
Get the new phone... and DO NOT update...
[email protected]!
Sent from my SM-G928T using Tapatalk
Soon as my v2 comes in, I'm downloading the package disabler app first and blocking updates
---------- Post added at 10:59 PM ---------- Previous post was at 10:58 PM ----------
I'm not losing my only chance at root with this phone.. why would they revert back to the jelly bean battery color...like wtf
To make it easier to identify version 2 phones.
OP care to explain how you updated to the V2 update on a V1 device ? e
MOD EDIT:
Please do not quote the whole OP when posting.
t0dbld said:
OP care to explain how you updated to the V2 update on a V1 device ? e
Click to expand...
Click to collapse
The API4 update is available to V1 phones. I took it, knowing I'd be getting a new phone in a couple of days.
As I understand it, they'll make you take it one way or the other.
i can confirm do not update your v2 note 7 to the new firmware. you cannot downgrade and they have blocked the sprint userdebug firmware from even flashing.
if you want to keep root. don't do it.
wht are the chances that the update comes straight from the box..
It does bro....i got mines today and it automatically started down loading...i just asked this question to @jovy23 in another thread
Yep, mine installed right out of the box. what a bunch of a-holes. wifes did the same thing, no root now welp, perhaps its time to return it and buy a different phone. this is retarded.
Chr0nicDreamz said:
Yep, mine installed right out of the box. what a bunch of a-holes. wifes did the same thing, no root now welp, perhaps its time to return it and buy a different phone. this is retarded.
Click to expand...
Click to collapse
what about restocking fee?
twe90kid said:
what about restocking fee?
Click to expand...
Click to collapse
why would I worry about that? tmobile owes me so many credits at this point I should have credit enough to cover my next bill
Saw someone mention it, and will try the same, but boot without sim card and wifif then disable the update app.....root then add sim.
Hopefully that will work cause I need my root. Dammit Samsung how dare you "burn" us again !!!
louforgiveno said:
Saw someone mention it, and will try the same, but boot without sim card and wifif then disable the update app.....root then add sim.
Hopefully that will work cause I need my root. Dammit Samsung how dare you "burn" us again !!!
Click to expand...
Click to collapse
as long as the phones don't come preinstalled then it's fine.
Well... I just updated to API4 intentionally, to try out the new update on my v1 device. I gotta say it's much more snappier now and lag is completely gone after it fully boots everything. But it's still not worth losing root over. So I'm either gonna get a refund or buy the international version, better yet might just say goodbye to sammy all together.
I don't know why anyone is still surprised about non-Nexus devices being locked down. Sure, a device might get root access, but it's the OEMs job to fix it in future builds because it's an exploit that needs to be fixed.
My update downloaded but I disabled, anyone know where the update file is? What folder? I can't find it.
the update ran as soon as it connected to their wifi network to set up the phone. crap, can't root now.
drum747 said:
My update downloaded but I disabled, anyone know where the update file is? What folder? I can't find it.
Click to expand...
Click to collapse
Same here, it downloads on its own but it can be postponed up to 3 times before it automatically installs the update, so what do I have to disable so the update won't install, or where can i find the update and delete that sob? Any info would be much appreciated as I don't have access to a computer to root or have the time at this very moment.
---------- Post added at 05:22 AM ---------- Previous post was at 05:20 AM ----------
drum747 said:
My update downloaded but I disabled, anyone know where the update file is? What folder? I can't find it.
Click to expand...
Click to collapse
What exactly did u disable?
You can go into settings and turn off auto updates, or download package disabler from the play store and disable the 2 software updates lines. I still have a v1 phone and no update here because of that

S7 will be unresponsive for a few seconds randomly

So I rooted and flash my s7 back to stock. Since then and after doing a couple of full factory resets and with no SD card in the phone's "recent" and "back" buttons at the bottom will light up, screen stays blank during this, then the phone will not wake up for a few seconds. Even if I'm pressing the Home and power buttons. Happens randomly.
I've used Package disabler Pro to disable all bloat ware, but still didn't help. Really not sure what to try next.
Any thoughts?
thanks
When you flashed back to stock, did you flash all 4 files via Odin? You didn't use Home_CSC, did you?
I believe I did flash all 4. But would you have a link for flashing so I can preform it again just to be sure. I didn't use the Home file either.
thanks
What is your current build number?
CVertigo1 said:
What is your current build number?
Click to expand...
Click to collapse
mmb29m.g930vvru4api3
https://androidfilehost.com/?fid=529152257862684790
---------- Post added at 05:41 PM ---------- Previous post was at 05:40 PM ----------
You can also look into the U-firmware. The latest build works very well on Verizon, and it's VERY responsive. You miss out on all of the Verizon based features, but everything else is silky smooth.
CVertigo1 said:
https://androidfilehost.com/?fid=529152257862684790
---------- Post added at 05:41 PM ---------- Previous post was at 05:40 PM ----------
You can also look into the U-firmware. The latest build works very well on Verizon, and it's VERY responsive. You miss out on all of the Verizon based features, but everything else is silky smooth.
Click to expand...
Click to collapse
Is this Marshmallow or Nougat? I can;t find much on it, or maybe I'm looking t the wrong threads. Any write ups on what is different? Is it rooted?
thanks
rdefino said:
Is this Marshmallow or Nougat? I can;t find much on it, or maybe I'm looking t the wrong threads. Any write ups on what is different? Is it rooted?
thanks
Click to expand...
Click to collapse
The one I linked is the exact same Marshmallow build you already have.
The U-firmware I mentioned is also Marshmallow. I did a short write-up with pros and cons in this forum a few days ago, along with a link to the firmware.
Finally, nothing that you flash with Odin on this phone will be rooted. The engineering (root) kernel can be flashed with Odin as part of the process to root the phone, but it won't flash a rooted system.
CVertigo1 said:
The one I linked is the exact same Marshmallow build you already have.
The U-firmware I mentioned is also Marshmallow. I did a short write-up with pros and cons in this forum a few days ago, along with a link to the firmware.
Finally, nothing that you flash with Odin on this phone will be rooted. The engineering (root) kernel can be flashed with Odin as part of the process to root the phone, but it won't flash a rooted system.
Click to expand...
Click to collapse
ahh, cool. Thanks.
The link you provided, I just need to flash the 4 files, excluding the Home file...correct?
I'll read up on the u-firmware.
thanks again
rdefino said:
ahh, cool. Thanks.
The link you provided, I just need to flash the 4 files, excluding the Home file...correct?
I'll read up on the u-firmware.
thanks again
Click to expand...
Click to collapse
Correct. Backup with SmartSwitch and all should be well.
CVertigo1 said:
Correct. Backup with SmartSwitch and all should be well.
Click to expand...
Click to collapse
1 more question. How do I backup with Smartswitch? I opened smartswicth but it only allows to transfer to another phone.
thanks
Download SmartSwitch from Samsung and install it on your PC.

Note 8 Oreo

Hey guys thought I could start this any news on Oreo coming to T-Mobile Note 8?? Post all news here thanks guys
I asked tmobile and samsung mobile I was redirected to support page for os Nougat on tmobile website.. Nothing else new.
Samsung announced that the Note 8 will get Oreo, the time line has not been said.
Oreo Beta
https://www.reddit.com/r/GalaxyNote8/comments/7ibsip/android_oreo_ota_this_is_real/
Been running this since yesterday. Only issue I've come across is that I can't allow unknown sources. Other than that it's ok so far. Truly nothing groundbreaking about it compared to the latest official update.
Sent from my SM-N950U using Tapatalk
deh2002 said:
Been running this since yesterday. Only issue I've come across is that I can't allow unknown sources. Other than that it's ok so far. Truly nothing groundbreaking about it compared to the latest official update.
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
Whaaa! That means that pretty soon we'll all be rolling in the bask of Oreo. Can't wait for the official update to roll out. [emoji2]
Sent from my [device_name] using XDA-Developers Legacy app
I installed the Oreo beta and don't like it. Want to go back to stable. I downloaded the original firmware AQH9 and have tried flashing in ODIN, but am getting a SHA256 failure error...
EDIT: Solved by using newer BQJA firmware to flash back to.
Oreo is running great! I didnt even have to use ODIN. (2) Update.zip(s) and a Factory Reset and i am good to go!
*edit*
BQJ1(N) to BQK2(N) Update.zip DOWNLOAD
and then
BQK2 to CQL1(Oreo) Update.zip DOWNLOAD
for T-Mobile Samsung Galaxy Note8 on BQJ1
---------- Post added at 08:02 PM ---------- Previous post was at 07:49 PM ----------
Nitemare3219 said:
I installed the Oreo beta and don't like it. Want to go back to stable. I downloaded the original firmware AQH9 and have tried flashing in ODIN, but am getting a SHA256 failure error...
EDIT: Solved by using newer BQJA firmware to flash back to.
Click to expand...
Click to collapse
Yea because AQH9 is on Bootloader 1 and BQJA is on Bootloader 2
---------- Post added at 08:14 PM ---------- Previous post was at 08:02 PM ----------
I added links to the update.zip files needed to update your N950U to Oreo
Where did you get BQJA firmaware? I couldnt find it on Sammobile.
daviddem said:
Where did you get BQJA firmaware? I couldnt find it on Sammobile.
Click to expand...
Click to collapse
https://www.sammobile.com/firmwares/galaxy-note8/SM-N950U/TMB/
Samsung Connect seems to have a bug and Android webview keeps force closing but Oreo Beta seems pretty cool otherwise..
Nitemare3219 said:
I installed the Oreo beta and don't like it. Want to go back to stable. I downloaded the original firmware AQH9 and have tried flashing in ODIN, but am getting a SHA256 failure error...
EDIT: Solved by using newer BQJA firmware to flash back to.
Click to expand...
Click to collapse
What didn't you like about it? I was considering it
Eternalty said:
What didn't you like about it? I was considering it
Click to expand...
Click to collapse
Some Substratum theme options weren't yet working. A few random force closes. Security Log agent messages from some apps. Lag in the notification shade when playing Spotify (so possibly any media). It's not like Oreo is a big upgrade, so I'm not in a rush to get it.
Nitemare3219 said:
Some Substratum theme options weren't yet working. A few random force closes. Security Log agent messages from some apps. Lag in the notification shade when playing Spotify (so possibly any media). It's not like Oreo is a big upgrade, so I'm not in a rush to get it.
Click to expand...
Click to collapse
I just got this phone two days ago and have been away from the forums for over 2 years. Root is available for BQJA if I read correctly. Is that right? I just want root for substratum. Downloaded it from the Play Store and it's offering me to buy an add on for "supported Samsung"
Eternalty said:
What didn't you like about it? I was considering it
Click to expand...
Click to collapse
Eternalty said:
I just got this phone two days ago and have been away from the forums for over 2 years. Root is available for BQJA if I read correctly. Is that right? I just want root for substratum. Downloaded it from the Play Store and it's offering me to buy an add on for "supported Samsung"
Click to expand...
Click to collapse
You don't need root for Substratum. The $1.99 add-on does work and is probably required.
deh2002 said:
Been running this since yesterday. Only issue I've come across is that I can't allow unknown sources. Other than that it's ok so far. Truly nothing groundbreaking about it compared to the latest official update.
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
You can, but only by using the built in "my files" app.. Also go to settings>apps then tap the dots in the top right and tap special access and look at the bottom of the list. Do you see install unknown apps?
I hope they fix the theming issues, half of the icons get the stupid white border/frame. even when you turn off icon frames its stays. its the biggest reason why I switched back. This Beta is really stale this year. I have it on my s8 to and I'm not really impressed
Deleted, nvm. Lol
AndroidDevices said:
Oreo is running great! I didnt even have to use ODIN. (2) Update.zip(s) and a Factory Reset and i am good to go!
*edit*
BQJ1(N) to BQK2(N) Update.zip DOWNLOAD
and then
BQK2 to CQL1(Oreo) Update.zip DOWNLOAD
for T-Mobile Samsung Galaxy Note8 on BQJ1
---------- Post added at 08:02 PM ---------- Previous post was at 07:49 PM ----------
Yea because AQH9 is on Bootloader 1 and BQJA is on Bootloader 2
---------- Post added at 08:14 PM ---------- Previous post was at 08:02 PM ----------
I added links to the update.zip files needed to update your N950U to Oreo
Click to expand...
Click to collapse
I'm on BQJA. Can I still update with these?
Sent from my SM-N950U using Tapatalk
MicroMod777 said:
I'm on BQJA. Can I still update with these?
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
Yes, that is the build that this is for....

Categories

Resources