Related
hey guyz my gf is using s4 from past year now, and it is still on android 4.2.2 (screen shot attached for details)
:crying:
shes having problem of updating it to next versions of androids 4.3.x, 4.4.x
when we try to update from samsung update (setting-->about-->software updates) it shows up to date
when we try to install via kies it shows latest firmware installed.
what should we do now ,thanks in advance.
Itsakash said:
hey guyz my gf is using s4 from past year now, and it is still on android 4.2.2 (screen shot attached for details)
:crying:
shes having problem of updating it to next versions of androids 4.3.x, 4.4.x
when we try to update from samsung update (setting-->about-->software updates) it shows up to date
when we try to install via kies it shows latest firmware installed.
what should we do now ,thanks in advance.
Click to expand...
Click to collapse
You have some options:
1. Flash a custom firmware through custom recovery.
2. Download the latest firmware and flash it through ODIN. For know what firmware is the best for you, conect it to Kies and tell me the 3 letters close to ur CSC
Joku1981 said:
You have some options:
1. Flash a custom firmware through custom recovery.
2. Download the latest firmware and flash it through ODIN. For know what firmware is the best for you, conect it to Kies and tell me the 3 letters close to ur CSC
Click to expand...
Click to collapse
Thanks for quick reply.
I already attached image showing csc characters.( MJ5(INU))
Does flashing firmware through odin void warrenty?
there is no way to get official update via software update or kies?
its just the update didt arrived for your country and there is 2 solutions :
1- wait till the update arrive
2- download & falsh the Update VIA Odin
if you flash it with odin nothing wrong will happen i just recommend you to backup everything :good:
RubbaBand said:
its just the update didt arrived for your country and there is 2 solutions :
1- wait till the update arrive
2- download & falsh the Update VIA Odin
if you flash it with odin nothing wrong will happen i just recommend you to backup everything :good:
Click to expand...
Click to collapse
one question, can i flash android 4.4.2 firmware over 4.2.2 via odin directly?
Itsakash said:
one question, can i flash android 4.4.2 firmware over 4.2.2 via odin directly?
Click to expand...
Click to collapse
you need to flash 4.3 then 4.4.2 Because of the bootloader
RubbaBand said:
you need to flash 4.3 then 4.4.2 Because of the bootloader
Click to expand...
Click to collapse
ok,so do i need to flash all updates that are passed over 4.2.2 up untill now to get the latest 4.4.2 or any one 4.3 firmware will work, and then 4.4.2 firmware ?
Where can i download all these firmwares?
Download 4.3 Here
You Want to download 4.4.2 you will need to signup to www.sammobile.com
then enter firmware section then search for your device in search bar "GT-I9500" then choose country and download
PS: if you dont know how to flash VIA Odin Search XDA or Google it
Hi !
Pls help with S3 neo 4.4.4.
I try few roms from Samsung but no success
first time I download with OTA update but when phone is get update ... I get odin screen with DOWNLOADING... with the message " could not do normal boot"
then I put back 4.3 with odin official update and the pone is working...
then I try few roms 4.4.4. official (India Kazakhstan Hon Kong) but no success always the same (odin) screen after update.
What I do wrong ?
now running 4.3 :crying:
GT-I9300I
s3ve3gub
I9300IUBUAND1
MSM8228
I have the same problem
I have the same problem. my phone is identical to yours April 2014 I9300IUBUAND1 I9300IUUBAND1 I9300IUBUAND1 4.3 Product Code: TTT--- I hope someone has a solution for our problem
Pls need solution or tip how to update my GT-I9300I Neo+ to Kitkat 4.4.4 ......
Here is my problem...I rooted my s3 neo gti9300i using towelroot and it worked ...I also didn't flash any custom recovery.. I bought my phone in june...its my first android phone...but nw I can't update as my device status is "MODIFIED"...I installed xposed and changed my device status to "OFFICIAL" using wanam xposed...I got the latest update 4.4.4...I downloaded but when it booted its self and started installing an "ERROR"...so I removed xposed and unrooted my phone using supersu...then again tryied nw ..not possible to get update server say that my system is modified...what to do nw...pls help...its my 1st phone..?
I believe it is in need of repartition. Some partition from the Rom you're trying to install exceeds current partition size.
So either find the correct update for your region (which I strongly advise) Either try it by ticking repartition( do it your own risk) which is not advisable as you might end up bricking the phone.
You need a pit file for repartition.
mariosraptor said:
I believe it is in need of repartition. Some partition from the Rom you're trying to install exceeds current partition size.
So either find the correct update for your region (which I strongly advise) Either try it by ticking repartition( do it your own risk) which is not advisable as you might end up bricking the phone.
You need a pit file for repartition.
Click to expand...
Click to collapse
whether they can pit file for Europe and rom for Kazakhstan because I found the pit to Europe. my phone is I9300IUBUAND1 I9300IUUBAND1 I9300IUBUAND1 4.3 Product Code: TTT Trinidad and Tobago.
Any solution for mine...
My phone is also S3 Neo + but is plus version with 1.4 CPU ... it is the first version for china jan 2014 .... all updates 4.3 is OK for him from Samsung firmwares .... but i cant update for 4.4 .... i always after any update get the android screen and after that Odin screen with downloading and message with cant do normal boot .... and cant go to recovery only flash back with 4.3....
Its my phone soft bricked ? I try also wit pit file and firmware flash but nothing.... the same situation ....
Pls help
nattila said:
My phone is also S3 Neo + but is plus version with 1.4 CPU ... it is the first version for china jan 2014 .... all updates 4.3 is OK for him from Samsung firmwares .... but i cant update for 4.4 .... i always after any update get the android screen and after that Odin screen with downloading and message with cant do normal boot .... and cant go to recovery only flash back with 4.3....
Its my phone soft bricked ? I try also wit pit file and firmware flash but nothing.... the same situation ....
Pls help
Click to expand...
Click to collapse
The best solution for you is to initialize your phone using Kies 3... However, this requires a running phone, not a bootlooping one... Use a firmware that works with you first!
Install it, connect your phone and do the initialization from the firmware menu... This should install the latest available firmware to your device while cleaning up the whole mess....
Good luck
moro89 said:
The best solution for you is to initialize your phone using Kies 3... However, this requires a running phone, not a bootlooping one... Use a firmware that works with you first!
Install it, connect your phone and do the initialization from the firmware menu... This should install the latest available firmware to your device while cleaning up the whole mess....
Good luck
Click to expand...
Click to collapse
The fanny thing is that .... I do have a functional phone with official Samsung firmware but its 4.3 .... I flashed almost every 4.3 on him all is working .... also try to root ..... flash recovery .... its all OK on 4.3
But when I come to 4.4.4 official firmware .... its refuse to boot ....
I try OTA update .... try KIES ... ODIN .....
always the same scenario .... after flash phone restarted ... I get the first screen with Samsung logo ... after its boot to odin with red message cant do normal boot... and don't let me to recovery (volume up+home) only to download (volume down+home)
Its weird
nattila said:
The fanny thing is that .... I do have a functional phone with official Samsung firmware but its 4.3 .... I flashed almost every 4.3 on him all is working .... also try to root ..... flash recovery .... its all OK on 4.3
But when I come to 4.4.4 official firmware .... its refuse to boot ....
I try OTA update .... try KIES ... ODIN .....
always the same scenario .... after flash phone restarted ... I get the first screen with Samsung logo ... after its boot to odin with red message cant do normal boot... and don't let me to recovery (volume up+home) only to download (volume down+home)
Its weird
Click to expand...
Click to collapse
Send it to Samsung... They definitely know how to put Kitkat on your device!
Are u sure you are downloading right firmware for your device since there are few variants around here, and mayb kitkat is not released for your variant ...
As i can see on samsung update page there is only one 4.4.4 for your device variant (s3ve3gUB)
http://samsung-updates.com/device/?id=GT-I9300I
It is : I9300IUBUBNJ1 ,so try flashing that one
Rox said:
Are u sure you are downloading right firmware for your device since there are few variants around here, and mayb kitkat is not released for your variant ...
As i can see on samsung update page there is only one 4.4.4 for your device variant (s3ve3gUB)
http://samsung-updates.com/device/?id=GT-I9300I
It is : I9300IUBUBNJ1 ,so try flashing that one
Click to expand...
Click to collapse
Do you mean.... this one???
http://www.sammobile.com/firmwares/download/37860/I9300IUBUBNJ1_I9300IUUBBNJ1_TTT.zip/
I try few times to flash I9300IUBUBNJ1 thru Odin .... OTA ... KIES .... no success ..... I have a weird phone ....
thanks for a tips
And yes ,,,,,,,my phone is UB variant .... maybe Samsung is not released firmware for my phone .....
I just look under hub
MODEL: GT-I9300I UD
SSN: I9300IGSMH
FCC: A3LGTI9300I
Still no luck with update to 4.4 ... ......
moro89 said:
The best solution for you is to initialize your phone using Kies 3... However, this requires a running phone, not a bootlooping one... Use a firmware that works with you first!
Install it, connect your phone and do the initialization from the firmware menu... This should install the latest available firmware to your device while cleaning up the whole mess....
Good luck
Click to expand...
Click to collapse
i cant install a firmware because , look at the photo , i tried 3 different Firmwares help !!!!!
nattila said:
I just look under hub
MODEL: GT-I9300I UD
SSN: I9300IGSMH
FCC: A3LGTI9300I
Click to expand...
Click to collapse
I am working on the same exact phone and I have having a hard time finding the right firmware for this phone.
It is stuck on recovery. I get a could not do normal boot and back to recovery. So I was planning on flashing a stock rom to get it out of recovery. Every how to page talks about going into setting to find your firmware version. This makes it hard when you cannot get into phone settings.
If you ever find the right Rom for this type of phone Please reply. Every rom site I have visited does not have the correct one.
This is most probably a hardware issue. Something on the main board got fried or some other glitch took place in a hardware component. Send it to Samsung for a repair or better buy a new phone.
---------- Post added at 12:25 PM ---------- Previous post was at 12:23 PM ----------
Another idea is to use Smart Switch. You don't need a running phone this time. Just choose the firmware initialization option and enter your device model and serial number, and you're good to go. If this didn't work, send it to Samsung or give it a goodbye kiss.
Hello 2 all !
i use the stock roms for my S4 ,most offen i use kitkat 4.4.2 versions.Today i reflash my phone and i get this stupid msg on notification : '
""Security notice' stating - 'your device's security has blocked an action that is not permitted. No further action is required'"" .. and this one is blocking the wifi to off, and i cant get it to ON the button rest grey after rom booted. .
I reflash many time with diffrent roms versions (only kk 4 4 2 from sammobile) the probl is the same on every rom i flash !!
I think is releate with KNOX crap but im not sure ,The only way to have wifi on kitkat again is to flash another kernel after i flash the stock rom !!! I really need help with that because i need some stock version for daily use.
I try kies ....same results.... i try odin..same results ...wifi dont start ! I delete wpa_supplicant from data/misc/wifi ..nothing.... no wifi ! Most of all when i open kies to reflash new firmware it say kies NO SUPPORT for youre model any more !! whtf???? i use to reflash with kies many time for fix trubles,and now...no suppot this model ??
I so many users with this problem but NO FIX for it !
Pls... if anyone can fix this or post an solution, i really apreciate for it .
My phone is S4 GT-I9515 and i use the stock rom 4.4.2 - I9515XXU1AND3_I9515YJV1ANE1_XSG
Pls .....any help ??
Here's the stock i9515 firmware: http://www.sammobile.com/firmwares/database/GT-I9515/
Maybe try a stock 5.01 firmware?
audit13 said:
Here's the stock i9515 firmware: http://www.sammobile.com/firmwares/database/GT-I9515/
Maybe try a stock 5.01 firmware?
Click to expand...
Click to collapse
You miss my point ..is stock firmware kitkat who has this problem, i flash 4.4.2.KK .....5.01 LP ,all stock roms!,the wifi is still stuck on grey button and when i try to activate it come up that notification pop with : Your phones security has blocked an action that is not permitted. No further action is required.! ...
jean_pulbere said:
Hello 2 all !
i use the stock roms for my S4 ,most offen i use kitkat 4.4.2 versions.Today i reflash my phone and i get this stupid msg on notification : '
""Security notice' stating - 'your device's security has blocked an action that is not permitted. No further action is required'"" .. and this one is blocking the wifi to off, and i cant get it to ON the button rest grey after rom booted. .
I reflash many time with diffrent roms versions (only kk 4 4 2 from sammobile) the probl is the same on every rom i flash !!
I think is releate with KNOX crap but im not sure ,The only way to have wifi on kitkat again is to flash another kernel after i flash the stock rom !!! I really need help with that because i need some stock version for daily use.
I try kies ....same results.... i try odin..same results ...wifi dont start ! I delete wpa_supplicant from data/misc/wifi ..nothing.... no wifi ! Most of all when i open kies to reflash new firmware it say kies NO SUPPORT for youre model any more !! whtf???? i use to reflash with kies many time for fix trubles,and now...no suppot this model ??
I so many users with this problem but NO FIX for it !
Pls... if anyone can fix this or post an solution, i really apreciate for it .
My phone is S4 GT-I9515 and i use the stock rom 4.4.2 - I9515XXU1AND3_I9515YJV1ANE1_XSG
Pls .....any help ??
Click to expand...
Click to collapse
jean_pulbere said:
You miss my point ..is stock firmware kitkat who has this problem, i flash 4.4.2.KK .....5.01 LP ,all stock roms!,the wifi is still stuck on grey button and when i try to activate it come up that notification pop with : Your phones security has blocked an action that is not permitted. No further action is required.! ...
Click to expand...
Click to collapse
I do not think I missed the point. Your original post only mentions KK but not LP which is why I suggested LP. The last line of your original post even states the ROM in use on the phone.
audit13 said:
I do not think I missed the point. Your original post only mentions KK but not LP which is why I suggested LP. The last line of your original post even states the ROM in use on the phone.
Click to expand...
Click to collapse
Ok ,my engl is not so good so maibe i im not make my self clear .. I use the rom posted in the last line ,for daily use till now... today i wanted to relflash the same rom and surpeise ,it comme up with that problem . I reflash many time bot not working again...so i decide to reflash diffrent version of stocks rom....Kitkat and Lolipop... and with no succes because that erorre is still present and wifi is still stuck on any rom i flash! I
No worries. Thank you for clarifying the situation. Your English is fine.
I don't know which version of Odin you are using but I always use Odin 3.07 because I have never had a problem with 3.07.
Do you have a pit file for your phone? Flashing the pit file with the stock ROM in Odin might solve the problem.
jean_pulbere said:
Ok ,my engl is not so good so maibe i im not make my self clear .. I use the rom posted in the last line ,for daily use till now... today i wanted to relflash the same rom and surpeise ,it comme up with that problem . I reflash many time bot not working again...so i decide to reflash diffrent version of stocks rom....Kitkat and Lolipop... and with no succes because that erorre is still present and wifi is still stuck on any rom i flash! I
Click to expand...
Click to collapse
This is coz KNOX blocked the wifi access.
SOLUTION:
1. Flash via ODIN the latest android 4.4.2 version to your device: THIS ONE.
2. Root it via ODIN with CF-Autoroot.
3. Using Root Explorer (for example) delete all the KNOX entries: GUIDE.
4. Reboot your device. You should have wifi now. Install TRIANGLE AWAY and reset your flash counter to complete the job. Done.
Joku1981 said:
This is coz KNOX blocked the wifi access.
SOLUTION:
1. Flash via ODIN the latest android 4.4.2 version to your device: THIS ONE.
2. Root it via ODIN with CF-Autoroot.
3. Using Root Explorer (for example) delete all the KNOX entries: GUIDE.
4. Reboot your device. You should have wifi now. Install TRIANGLE AWAY and reset your flash counter to complete the job. Done.
Click to expand...
Click to collapse
I really apreciate your help,lets try to see what happen" )) In this moment the only way to use wifi is because i flash other kernel (Googy_max3 patched for my phone model) so...let"s try and i ll commeback with news,thx very much again!
Joku1981 said:
This is coz KNOX blocked the wifi access.
SOLUTION:
1. Flash via ODIN the latest android 4.4.2 version to your device: THIS ONE.
2. Root it via ODIN with CF-Autoroot.
3. Using Root Explorer (for example) delete all the KNOX entries: GUIDE.
4. Reboot your device. You should have wifi now. Install TRIANGLE AWAY and reset your flash counter to complete the job. Done.
Click to expand...
Click to collapse
And the answer is ......... NO ((( Same problem same notification NO WIFI ,the button is still grey (( it s start to make it me crazy this crap ..grrrr... is there any way to get ONLY the kernel ,stock kernel for my firmware ??? maibe if i flash separate will fix it ...i was think about that because if if flash the googy_max3 patched it works ...so may be an kernel probl ??? ((
jean_pulbere said:
And the answer is ......... NO ((( Same problem same notification NO WIFI ,the button is still grey (( it s start to make it me crazy this crap ..grrrr... is there any way to get ONLY the kernel ,stock kernel for my firmware ??? maibe if i flash separate will fix it ...i was think about that because if if flash the googy_max3 patched it works ...so may be an kernel probl ??? ((
Click to expand...
Click to collapse
Install this APP and add screenshots pls.
You mentioned that you tried kies in your post but Kies didn't support your phone. It could be that the updated ROM is supported in Samsung's smart switch.
http://www.samsung.com/us/smart-switch/
audit13 said:
No worries. Thank you for clarifying the situation. Your English is fine.
I don't know which version of Odin you are using but I always use Odin 3.07 because I have never had a problem with 3.07.
Do you have a pit file for your phone? Flashing the pit file with the stock ROM in Odin might solve the problem.
Click to expand...
Click to collapse
i try flashing with all odin version included 3.07 but is not odin probl...is something in my phone that bloked wifi in kernel or something..knox..security polices i dont have any clue how to fix it...i flash phone from years..many models..but never happen like this...i dont hv any explication. kies not support my phone model but till now it was supported.. i try it with the other soft recomandate from kies and surprise..not support for my model !! im really f..k up...pfff... what du you say about pit file??? i dont hv that file..where to search and how to use??
Joku1981 said:
Install this APP and add screenshots pls.
Click to expand...
Click to collapse
i know the apk for phone info...what do you want to see ?? i make the screenshot at ..what??
audit13 said:
You mentioned that you tried kies in your post but Kies didn't support your phone. It could be that the updated ROM is supported in Samsung's smart switch.
http://www.samsung.com/us/smart-switch/
Click to expand...
Click to collapse
i told you ..till now i repair my stock with kies or smart swich...many time i do that.so ..today when i instaled kies and open..surpriseeee..my model not suported!! i install smart swich..open...surpriseee..your device not supported!!..whtf !??
incredibile...i extracted modem.bin and wifi modem from stock firmware..flashed ...no success again....im in a point break...no clue what to do. i bet is something related to security ..but not sure..because of notificatiin mesage...security block bla bla...... triangleaway was reseting my flash counter knox disable delete..rooted...all works but not the damn wifi...samsung i hate you!! (
jean_pulbere said:
incredibile...i extracted modem.bin and wifi modem from stock firmware..flashed ...no success again....im in a point break...no clue what to do. i bet is something related to security ..but not sure..because of notificatiin mesage...security block bla bla...... triangleaway was reseting my flash counter knox disable delete..rooted...all works but not the damn wifi...samsung i hate you!! (
Click to expand...
Click to collapse
Try a custom rom.
Lennyz1988 said:
Try a custom rom.
Click to expand...
Click to collapse
Finnaly the probl is fixed !!!!! pffffff... i flash with odin 10.7 the lolipop stock rom 5.0 ,after full instal, go to recovery stock and wipe factory reset wipe chache ,reboot download mode and flash again 4.4.2 kit kat,roted instal twrp and ..gere you go all function back to normal ! ))) pfffhiuuu ... thx for helping me guys ! Btw ...i still search for stock 4.4.2 kernel ... pls post link if you know !
I have samsung Galaxy S4 ( I9500 )
i have installed cm-12.1-20160918-NIGHTLY-i9500.zip With philz_touch_6.48.4-i9500 and it worked Well but there was a problem i call I can't here or the other here me unless open speaker and close it again it works well .. then i got OTA update i started to download it with CMUpdater and download speed wasn't well i canceled the download and Downloaded ( cm-12.1-20161002-NIGHTLY-i9500.zip ) manually and Flash it with the same Recovery after this flash process my phone started normally but when i Lock the screen and try to wake it up again it won't wake up but the device still working :/ .. and other problem is Back, menu Keys didn't work any more After this flash .. and Recovery Won't Boot :/ tried to change ( CWM - Phliz ) it and nothing happen .. TWRP is the only recovery Work But other problem still .. and i flash Stock Rom With ODIN and Problems Still i flash Kit kat and Lolipop .. nothing help :"3 ..
any help ??
ahmed44251 said:
I have samsung Galaxy S4 ( I9500 )
i have installed cm-12.1-20160918-NIGHTLY-i9500.zip With philz_touch_6.48.4-i9500 and it worked Well but there was a problem i call I can't here or the other here me unless open speaker and close it again it works well .. then i got OTA update i started to download it with CMUpdater and download speed wasn't well i canceled the download and Downloaded ( cm-12.1-20161002-NIGHTLY-i9500.zip ) manually and Flash it with the same Recovery after this flash process my phone started normally but when i Lock the screen and try to wake it up again it won't wake up but the device still working :/ .. and other problem is Back, menu Keys didn't work any more After this flash .. and Recovery Won't Boot :/ tried to change ( CWM - Phliz ) it and nothing happen .. TWRP is the only recovery Work But other problem still .. and i flash Stock Rom With ODIN and Problems Still i flash Kit kat and Lolipop .. nothing help :"3 ..
any help ??
Click to expand...
Click to collapse
Get the i9500 lollipop firmware from the sammobile and flash it via odin. Please get the firmware which is the same or newer then your bootloader.
sway8966 said:
Get the i9500 lollipop firmware from the sammobile and flash it via odin. Please get the firmware which is the same or newer then your bootloader.
Click to expand...
Click to collapse
i flashed it several times before and worked well .. but now i don't know what's happening
sway8966 said:
Get the i9500 lollipop firmware from the sammobile and flash it via odin. Please get the firmware which is the same or newer then your bootloader.
Click to expand...
Click to collapse
tell me how to know My Device Bootloader
ahmed44251 said:
tell me how to know My Device Bootloader
Click to expand...
Click to collapse
Just install phone info app from play store
Arpit Aggarwal said:
Just install phone info app from play store
Click to expand...
Click to collapse
it said the same bootloader in version i flash .. can i know the original or some thing like this ?
ahmed44251 said:
it said the same bootloader in version i flash .. can i know the original or some thing like this ?
Click to expand...
Click to collapse
When I was in kitkat I did not check the bootloader version and flashed older version which tripped the knox counter. That was why I I asked you to check the bootloader .
If you flashed the correct firmware via odin, believe that the firmware download has no problem, and flashing odin did not give any errors and yet you still have some problem, then your problem likely to be a hardware failure rather than software.
check the checksum of the downloaded firmware, flashing from different usb port or different computer, flashing with different version of odin, etc.. are the tries you can do.
sway8966 said:
When I was in kitkat I did not check the bootloader version and flashed older version which tripped the knox counter. That was why I I asked you to check the bootloader .
If you flashed the correct firmware via odin, believe that the firmware download has no problem, and flashing odin did not give any errors and yet you still have some problem, then your problem likely to be a hardware failure rather than software.
check the checksum of the downloaded firmware, flashing from different usb port or different computer, flashing with different version of odin, etc.. are the tries you can do.
Click to expand...
Click to collapse
i'll try
i downloaded Jelly bean, Kitkat and i'll flash each
Nothing Worked it still same things
ahmed44251 said:
i'll try
i downloaded Jelly bean, Kitkat and i'll flash each
Click to expand...
Click to collapse
Could you tell me your bootloader version of your phone and also give me the link of the lollipop firmware that you downloaded from the sammobile.
if it is possible could you tell me what message you have when you flash that lollipop firmware via odin.
If your phone is on lollipop, flashing kit-kat or jelly beam wont help and it could harm your phone.
sway8966 said:
Could you tell me your bootloader version of your phone and also give me the link of the lollipop firmware that you downloaded from the sammobile.
if it is possible could you tell me what message you have when you flash that lollipop firmware via odin.
If your phone is on lollipop, flashing kit-kat or jelly beam wont help and it could harm your phone.
Click to expand...
Click to collapse
bootloader Version : I9500XXUHPH3
Frimware link : http://www.sammobile.com/firmwares/download/93065/I9500XXUHPH3_I9500SERHPH1_SER/
Odin didn't Gave me any Error Messages .. it work Like charm
Kitkat Solve Original Recovery Problem .. and two other problems still ...but lollipop all 3 still
Could 4Files Firmware Help ??
ahmed44251 said:
bootloader Version : I9500XXUHPH3
Frimware link : http://www.sammobile.com/firmwares/download/93065/I9500XXUHPH3_I9500SERHPH1_SER/
Odin didn't Gave me any Error Messages .. it work Like charm
Kitkat Solve Original Recovery Problem .. and two other problems still ...but lollipop all 3 still
Click to expand...
Click to collapse
Well ph1/ph3 is the latest firmware for i9500 . It was released a week ago. It is for Russia. I am using the firmware released in 2015. Try to download it again and flash it.
4 files Frimware and I9500XXUHPH3 Didn't help :/
this maybe Hardware problem (board .. )
okay so i have this lil problem on my galaxy j5
a few months ago ive found this thread: https://forum.xda-developers.com/galaxy-j5/how-to/tutorial-upgrade-j5-2015-to-6-0-t3443904 so i tried to upgrade my phone to android 6.0.1(firmware: http://updato.com/firmware-archive-select-model?record=D2F21816700B11E69B2DFA163EE8F90B) and it works perfectly fine tho
but im trying to downgrade to 5.1.1 coz i cant install any custom mods and kernels so i tried to flash a android 5.1.1 firmware(http://updato.com/firmware-archive-select-model?record=F33B6BD4400411E6815B0CC47A44B7B2) which it gave me bootloops
i tried to re-flash it to android 6.0.1 firmware i recently downloaded. it works and it starts up ok but it says that the system is not running and it should be factory reset--something like that. so ive factory reset my phone and again..it gave me bootloops
fortunately ive recently did some twrp backup and good thing it worked fine. but the problem is that the recovery didnt backup my phone password(which im stucked rn bcoz i cant type my main phone password)
im preety stuck here and if i factory reset again it still gives me bootloops
pls bear with me if you dont really understand my problem(im not that fluent in english)
dankfrank33 said:
okay so i have this lil problem on my galaxy j5
a few months ago ive found this thread: https://forum.xda-developers.com/galaxy-j5/how-to/tutorial-upgrade-j5-2015-to-6-0-t3443904 so i tried to upgrade my phone to android 6.0.1(firmware: http://updato.com/firmware-archive-select-model?record=D2F21816700B11E69B2DFA163EE8F90B) and it works perfectly fine tho
but im trying to downgrade to 5.1.1 coz i cant install any custom mods and kernels so i tried to flash a android 5.1.1 firmware(http://updato.com/firmware-archive-select-model?record=F33B6BD4400411E6815B0CC47A44B7B2) which it gave me bootloops
i tried to re-flash it to android 6.0.1 firmware i recently downloaded. it works and it starts up ok but it says that the system is not running and it should be factory reset--something like that. so ive factory reset my phone and again..it gave me bootloops
fortunately ive recently did some twrp backup and good thing it worked fine. but the problem is that the recovery didnt backup my phone password(which im stucked rn bcoz i cant type my main phone password)
im preety stuck here and if i factory reset again it still gives me bootloops
pls bear with me if you dont really understand my problem(im not that fluent in english)
Click to expand...
Click to collapse
I dont own that device, but i thing this would work:
Flash latest 6.0 firmware with samsung smart swich (PC), enable oem unlock in settings, flash twrp for 6.0 with latest odin, do a factory reset and a full wipe (except external sd an android secure). Then download latest 5.1 firmware for your device an flash it with odin (it will take some time).
plzzzzzz solution this problem urgent
mohsin5 said:
plzzzzzz solution this problem urgent
Click to expand...
Click to collapse
There is no solution.
You are stuck on Marshmallow
Hai bro,,,
u try this one after flashing offical firmware simply reboot your device into recovery mode by pressing Power + Home + Volume UP and do a wipe data/factory reset, and wipe cache partitions then reboot your device, it will start properly and all problems are now solved,,,,,
dankfrank33 said:
okay so i have this lil problem on my galaxy j5
a few months ago ive found this thread: https://forum.xda-developers.com/galaxy-j5/how-to/tutorial-upgrade-j5-2015-to-6-0-t3443904 so i tried to upgrade my phone to android 6.0.1(firmware: http://updato.com/firmware-archive-select-model?record=D2F21816700B11E69B2DFA163EE8F90B) and it works perfectly fine tho
but im trying to downgrade to 5.1.1 coz i cant install any custom mods and kernels so i tried to flash a android 5.1.1 firmware(http://updato.com/firmware-archive-select-model?record=F33B6BD4400411E6815B0CC47A44B7B2) which it gave me bootloops
i tried to re-flash it to android 6.0.1 firmware i recently downloaded. it works and it starts up ok but it says that the system is not running and it should be factory reset--something like that. so ive factory reset my phone and again..it gave me bootloops
fortunately ive recently did some twrp backup and good thing it worked fine. but the problem is that the recovery didnt backup my phone password(which im stucked rn bcoz i cant type my main phone password)
im preety stuck here and if i factory reset again it still gives me bootloops
pls bear with me if you dont really understand my problem(im not that fluent in english)
Click to expand...
Click to collapse
With the J500H, Samsung decided to lock the bootloader, meaning you can't downgrade. J500h seems to be the only locked device. Unless someone finds a way to unlock the bootloader then you are stuck on 6.0.1.
More information here: https://forum.xda-developers.com/galaxy-j5/how-to/warning-flash-marshmallow-updates-t3500396
Sent from my Galaxy Tab A 10.1 using XDA Labs
dankfrank33 said:
okay so i have this lil problem on my galaxy j5
a few months ago ive found this thread: https://forum.xda-developers.com/galaxy-j5/how-to/tutorial-upgrade-j5-2015-to-6-0-t3443904 so i tried to upgrade my phone to android 6.0.1(firmware: http://updato.com/firmware-archive-select-model?record=D2F21816700B11E69B2DFA163EE8F90B) and it works perfectly fine tho
but im trying to downgrade to 5.1.1 coz i cant install any custom mods and kernels so i tried to flash a android 5.1.1 firmware(http://updato.com/firmware-archive-select-model?record=F33B6BD4400411E6815B0CC47A44B7B2) which it gave me bootloops
i tried to re-flash it to android 6.0.1 firmware i recently downloaded. it works and it starts up ok but it says that the system is not running and it should be factory reset--something like that. so ive factory reset my phone and again..it gave me bootloops
fortunately ive recently did some twrp backup and good thing it worked fine. but the problem is that the recovery didnt backup my phone password(which im stucked rn bcoz i cant type my main phone password)
im preety stuck here and if i factory reset again it still gives me bootloops
pls bear with me if you dont really understand my problem(im not that fluent in english)
Click to expand...
Click to collapse
You can't downgrade anymore. I have J500H too. Im using Custom ROM right now.
More info here: https://forum.xda-developers.com/galaxy-j5/how-to/warning-flash-marshmallow-updates-t3500396
There is no solution.
update: after spending days of searching from google, i found a 5.1.1 firmware that is compatible with my 6.0.1 firmware since they have nearly similar baseband versions(J500HXWU1APE5 for the lolipop and J500HXWU1BPG1 for marshmallow). so now i can upgrade and downgrade the phone's firmware with ease
please, help me.
dankfrank33 said:
update: after spending days of searching from google, i found a 5.1.1 firmware that is compatible with my 6.0.1 firmware since they have nearly similar baseband versions(J500HXWU1APE5 for the lolipop and J500HXWU1BPG1 for marshmallow). so now i can upgrade and downgrade the phone's firmware with ease
Click to expand...
Click to collapse
u can show me. how to flash with odin (
Firmware downgrade Samsung J500H from MarshMallow with the second loader to LP.
Those who are faced with the inability to roll back to version 5.1.1 are uncomfortable with using their phone.
We need to either use the Philippine firmware or install a custom firmware Belousova.
I found an acceptable way to flash my phone with a stock firmware.
For rollback, we need a four-file stock firmware J500HXXU1APA5 or J500HXXS1APE1.
File BL with the second loader BL_J500HXXU1APA5_CL958143_QB8363487_REV00_user_low_ship_MULTI_CERT.tar or BL_J500HXXS1APE1_CL1011281_QB9453563_REV00_user_low_ship_MULTI_CERT.tar .
Odin.exe.
Please note: these files for the regions: CAC, CAU, SEK, SER, SKZ.
In other regions, wi-fi or a radio module may not work.
For other regions, you need another file for a specific firmware.
If you need another region, write me the name of your firmware.
The process of the firmware I will not describe, it is well known.
You can see video here.
See original post:"sw-tech-blog.blogspot.com/2018/01/firmware-downgrade-samsung-j500h-from.html"
SWM1956 said:
Those who are faced with the inability to roll back to version 5.1.1 are uncomfortable with using their phone.
We need to either use the Philippine firmware or install a custom firmware Belousova.
I found an acceptable way to flash my phone with a stock firmware.
For rollback, we need a four-file stock firmware J500HXXU1APA5 or J500HXXS1APE1.
File BL with the second loader BL_J500HXXU1APA5_CL958143_QB8363487_REV00_user_low_ship_MULTI_CERT.tar or BL_J500HXXS1APE1_CL1011281_QB9453563_REV00_user_low_ship_MULTI_CERT.tar .
Odin.exe.
Please note: these files for the regions: CAC, CAU, SEK, SER, SKZ.
In other regions, wi-fi or a radio module may not work.
For other regions, you need another file for a specific firmware.
If you need another region, write me the name of your firmware.
The process of the firmware I will not describe, it is well known.
You can see video here.
See original post:"sw-tech-blog.blogspot.com/2018/01/firmware-downgrade-samsung-j500h-from.html"
Click to expand...
Click to collapse
i just flashed a stock LP firmware that has the same region on my stock MM firmware(MBC) and everything worked fine
idk abt the others who updated on samsung updates(which locks the bootloader), since i updated it manually through odin in the first place
also this is my used firmwares:
5.1.1: https://samsung-firmware.org/download/Galaxy__J5__/zvs5/MBC/J500HXWU1APE5/J500HMBC1APE5/
6.0.1: https://samsung-firmware.org/download/Galaxy__J5__/4u11/MBC/J500HXWU1BPG1/J500HMBC1BPG1/
i downloaded both on updato but too lazy to find it
dankfrank33 said:
i just flashed a stock LP firmware that has the same region on my stock MM firmware(MBC) and everything worked fine
idk abt the others who updated on samsung updates(which locks the bootloader), since i updated it manually through odin in the first place
Click to expand...
Click to collapse
First update to MM have the some botloader like LP. But next update have other bootloader and you can't boot LP with odin to your telephon.
10:32 And some more - Philippines firmware LP 5.1.1 have second bootloader. You can downgrade from last update MM to LP 5.1.1 very easy.
SWM1956 said:
First update to MM have the some botloader like LP. But next update have other bootloader and you can't boot LP with odin to your telephon.
10:32 And some more - Philippines firmware LP 5.1.1 have second bootloader. You can downgrade from last update MM to LP 5.1.1 very easy.
Click to expand...
Click to collapse
i have J500H Pakistan region can i downgrade from mm to Lp please help....
---------- Post added at 01:08 PM ---------- Previous post was at 01:04 PM ----------
please give frimware for the pakistan region (PAK) please i want to downgrade ...
---------- Post added at 01:21 PM ---------- Previous post was at 01:08 PM ----------
frimware J500HXXU1APA5_J500HOJV1APB1_PAK
Hasnig said:
i have J500H Pakistan region can i downgrade from mm to Lp please help....
---------- Post added at 01:08 PM ---------- Previous post was at 01:04 PM ----------
please give frimware for the pakistan region (PAK) please i want to downgrade ...
Click to expand...
Click to collapse
Yes you can. But please write name your Baseand version from "About device".
Then I can make file BL for you.
SWM1956 said:
Yes you can. But please write name your Baseand version from "About device".
Then I can make file BL for you.
Click to expand...
Click to collapse
THANKS DEAR FOR REPLY...
My baseband version is J500HXXU2BQA1
Hasnig said:
THANKS DEAR FOR REPLY...
My baseband version is J500HXXU2BQA1
Click to expand...
Click to collapse
I'm sorry but I can't found four-file repair firmware for LP 5.1.1 to your region.
You can try download files for my region at one's own risk.
I not garranted work radio or modem in your region. Or other way is firmware for philippines. It have second bootloader in LP 5.1.1
SWM1956 said:
I'm sorry but I can't found four-file repair firmware for LP 5.1.1 to your region.
You can try download files for my region at one's own risk.
I not garranted work radio or modem in your region. Or other way is firmware for philippines. It have second bootloader in LP 5.1.1
Click to expand...
Click to collapse
if install your region frimware or philippines then install my region AP frimware then it work for me.???
Hasnig said:
THANKS DEAR FOR REPLY...
My baseband version is J500HXXU2BQA1
Click to expand...
Click to collapse
I found how I can help for you.
You may download firmware from here :"goo.gl/Yk1Byz" and unzip and flash in odin this firmware.
Then if some hardware not working you may download firmware for your region from here:"goo.gl/SdcwhA"
and unzip repeat the flash with odin but with one file firmware.
And If you don't update your telephon to MM you can flash telephon using only this stock firmware. Save it. First file you can delete.
I am sorry - in first step you may set BL for APE1 file from my blog . It have second bootloader for firmware.