Related
I literally just got the 4.3 OTA update. Phone was fully charged... like 98%. I went ahead and let it update. It rebooted, and it got about 75% into updating and then the icon switched to the sideways android with the red caution symbol and said "Error". I let it sit there for awhile hoping it would do something. It didn't, so I held down power to reboot. It rebooted to the same icon, but now says "No command". I did the vol up/power to get into the wipe/reboot options. I went ahead and rebooted. Every single time... I see the Google logo for like a min, then to the sad android logo w/ "No command". Now I can't even get that far, the indicator light flashes red. I've read that indicates a totally drained battery. Not sure how it can go from full charged to fully drained in a matter of minutes. However on the issue of the error and no command, is my device dead? I've never rooted it or used custom roms. I got the N4 for the pure vanilla stock experience, so I never felt rooting was needed. Any advice? Should I just call Google and request replacement?
I would try a few things first before calling Google. Sometimes the battery doesn't show its correct percentage, it's pretty common on my N4 as far as I can tell. Maybe you've just run out of battery. Let it charge for half an hour or so and then try it again.
If you can't boot to system after that, turn off your phone, press and hold volume down and power buttons at the same time for a few seconds until it boots to bootloader. If you can't boot to bootloader after doing this let it charge for more time, an hour or two.
Sometimes, after the battery has run dry completely it is really hard to turn the phone on (I've even seen this behavior on my 7 years old Nokia). One question, does a charging animation shows up when you plug your phone?
Mercado_Negro said:
I would try a few things first before calling Google. Sometimes the battery doesn't show its correct percentage, it's pretty common on my N4 as far as I can tell. Maybe you've just run out of battery. Let it charge for half an hour or so and then try it again.
If you can't boot to system after that, turn off your phone, press and hold volume down and power buttons at the same time for a few seconds until it boots to bootloader. If you can't boot to bootloader after doing this let it charge for more time, an hour or two.
Sometimes, after the battery has run dry completely it is really hard to turn the phone on (I've even seen this behavior on my 7 years old Nokia). One question, does a charging animation shows up when you plug your phone?
Click to expand...
Click to collapse
It's been charging now for a little over an hour. No animation or indication the battery may be drained other than the red indicator light when I try to go to into the boot loader. Still can't do anything. If I power it on, I see Google logo for awhile, then sad Android icon and "no command". If I try to go into bootloader, just red indicator light and black screen. All while plugged in.
I just don't understand how it went from fully charged to drained in minutes. It was plugged in for hours today. In fact I initiated the OTA update only about 20-30 min after taking it off the charger.
Unplug your device, press and hold the power and volume down buttons for a few seconds until it boots to the bootloader. Now plug your phone again and let it charge.
Mercado_Negro said:
Unplug your device, press and hold the power and volume down buttons for a few seconds until it boots to the bootloader. Now plug your phone again and let it charge.
Click to expand...
Click to collapse
Alright, it's now been charging for 3 hours. I did what you just suggested. All that happens is I see a white Google logo for about 10 seconds, then it goes black. I think the device is off at this point. Stupid question I'm sure... I can't dock my phone to my computer to get any of my data at the "no command" screen can I? It needs to be fully booted, right?
Get into recovery, wipe cache, then it "should" boot.
ksilver89 said:
Get into recovery, wipe cache, then it "should" boot.
Click to expand...
Click to collapse
Like I said above, I'm not able to. I hold down power + vol up and it just shows white Google logo then goes black.
Well hmmm. I just did power + vol down for the hell of it, and I have a menu. Selected "recovery mod" and it just went straight to the sad Android icon with "No command".
I'm not sure what to make of all the stuff I see on this menu...
https://dl.dropboxusercontent.com/u/28754710/20130730_100302.jpg
Here is a short video of what I get from that menu when trying to go into recovery...
https://dl.dropboxusercontent.com/u/28754710/20130730_100936.mp4
For the sake of simplicity, learn how to use Fastboot. You should find more than enough information in the General section.
All you need to do is run this command in bootloader mode.
Code:
fastboot format cache
Edit:
Just saw the video, press vol up + power together in the recovery to access the menu.
ksilver89 said:
For the sake of simplicity, learn how to use Fastboot. You should find more than enough information in the General section.
All you need to do is run this command in bootloader mode.
Code:
fastboot format cache
Edit:
Just saw the video, press vol up + power together in the recovery to access the menu.
Click to expand...
Click to collapse
Again... like I said before vol up + power does nothing. I can take a video if you like.
Disregard the above. Got it into recovery. I guess my pushing was off or something. I took the rigid case off and made it easier to press the vol button. Let's see what happens now.
Alright. Got into recovery, did a wipe data/factory reset, still no dice. This time it rebooted several times, Google white logo each time, then finally a sad Android icon with "No command". Guessing next step is to download it and try updating via ADB?... or just say screw it and call Google and initiate a replacement?
Alright, it is screwed. Long guide here: http://forum.xda-developers.com/showthread.php?t=2010312
Short guide:
1. You need basically 3 things, the factory image, fastboot, and nexus 4 drivers
2. Download and setup all of them.
3. Extract the factory image tgz file TWICE until you see a folder.
4. Place "fastboot" into that folder.
5. Unlock your bootloader, shift + right click inside the folder, Open command window here. Run "fastboot oem unlock" and read the agreement (it's screwed anyway), select Yes if agree.
6. Once unlocked, run "flash-all".
7. Go running around your house for 10 mins.
Warning: This operation will wipe everything in your phone, if there's any crucial data, edit flash-all.bat to remove "-w" flag, and remove userdata.img in the occam zip.
Edit:
Or probably you can just get a toolkit...
ksilver89 said:
Alright, it is screwed. Long guide here: http://forum.xda-developers.com/showthread.php?t=2010312
Short guide:
1. You need basically 3 things, the factory image, fastboot, and nexus 4 drivers
2. Download and setup all of them.
3. Extract the factory image tgz file TWICE until you see a folder.
4. Place "fastboot" into that folder.
5. Unlock your bootloader, shift + right click inside the folder, Open command window here. Run "fastboot oem unlock" and read the agreement (it's screwed anyway), select Yes if agree.
6. Once unlocked, run "flash-all".
7. Go running around your house for 10 mins.
Warning: This operation will wipe everything in your phone, if there's any crucial data, edit flash-all.bat to remove "-w" flag, and remove userdata.img in the occam zip.
Edit:
Or probably you can just get a toolkit...
Click to expand...
Click to collapse
Thanks for your help. I appreciate it. I'm probably going to give this a try, couldn't get any worse. I think all data is gone anyhow when I did the factory reset option in the recovery, right? I did just call Google, they said I could get a replacement no problem, but that will probably take a week.
pixelbat said:
Thanks for your help. I appreciate it. I'm probably going to give this a try, couldn't get any worse. I think all data is gone anyhow when I did the factory reset option in the recovery, right? I did just call Google, they said I could get a replacement no problem, but that will probably take a week.
Click to expand...
Click to collapse
Yes, what he suggested should get you up and running again (if not, then yes your phone needs a replacement). I saw the video and the image. I'm pretty sure your system was wiped somehow and that's why you can't boot to it anymore. If what he suggested fails I can walk you through the steps to flash each factory image separately.
What would you do if the nexus 4 drivers wont install?
I have similar problem, I got the 4.3 update ota and it crashed half way through and now it gets stuck on the X logo. I was trying to follow a guide (http://forum.xda-developers.com/showthread.php?t=2010312) to install 4.3 back onto the device but failed at the first hurdle, when plugin the phone in it fails on the driver software installation - mtp usb device failed.
Is there any other way to do it?
pixelbat said:
Thanks for your help. I appreciate it. I'm probably going to give this a try, couldn't get any worse. I think all data is gone anyhow when I did the factory reset option in the recovery, right? I did just call Google, they said I could get a replacement no problem, but that will probably take a week.
Click to expand...
Click to collapse
unplug your phone. reboot into bootloader (vol down + power) but don't plug it in
downloaded the file posted in this topic from the google website.
http://forum.xda-developers.com/showthread.php?p=44088784
once you download it, extract it to a folder
then open up flash_all.bat in notepad, and it will say -w near the end. remove that (leaving it would wipe all of your data) and save the file
then run it, it will say waiting for device. plug your phone in and it will start updating
flipfamous said:
What would you do if the nexus 4 drivers wont install?
I have similar problem, I got the 4.3 update ota and it crashed half way through and now it gets stuck on the X logo. I was trying to follow a guide (http://forum.xda-developers.com/showthread.php?t=2010312) to install 4.3 back onto the device but failed at the first hurdle, when plugin the phone in it fails on the driver software installation - mtp usb device failed.
Is there any other way to do it?
Click to expand...
Click to collapse
Which driver did you try to install? Naked Drivers 0.72? What OS (Win8, Win7, etc)?
Plug your device in, go to control panel, click on Device Manager, scan for hardware changes or select the device with a yellow exclamation mark. Click on "Update driver" and search for the drivers in your PC (where you downloaded them). That should work.
Just Boot from a ubuntu live cd, install fastboot with apt-get and get started
Gesendet von meinem Nexus 4 mit Tapatalk 4 Beta
Hi, im in the process of selling my phone and am following the tutorial on here about turning the phone back onto stock. The flash with flashtool was successful but im forever stuck on the boot screen? with now no way to go into custom recovery? i installed the correct rom for the phone so why hasnt it worked? thanks in advance.
dav08094194 said:
Hi, im in the process of selling my phone and am following the tutorial on here about turning the phone back onto stock. The flash with flashtool was successful but im forever stuck on the boot screen? with now no way to go into custom recovery? i installed the correct rom for the phone so why hasnt it worked? thanks in advance.
Click to expand...
Click to collapse
The only way I could get it to work was the following; however there is one thing to try before you try my way because mine did this also - after the wipe and flash with flashtool etc. The only way I found to get out the bootloop was to do a factory restore after when its looping. So from the boot screen loop hold the power button until it goes off then on then off again.
Then do the process to get into the recovery so hold down and power then release power as soon as the lg logo appears (first one) then press it again immediately that SHOULD get ya to the grey factory reset screen. Press the power button 3 x and it should do a factory restore and boot up this time. First boot may take a minute it should eventually start up.
Failing that try this - Open the lg mobile support tool and connect the phone in download mode (volume up and power with plugged in usb on mine) then go to options and upgrade recovery. it will download a file usually about 2GB then install it, the phone will reboot at 100% on the phone and 80ish% on the lg tool it will then start into the setup feature,
DO NOT disconnect the phone until it gets to 100% and finishes. This way you shouldn't need to do an extra factory reset.
I understand for this the phone needs to be seen on com 4 (it shows on the phone screen) so if necessary go into device manager with the phone still plugged in in download mode and select com ports then select the phone com port then right click >properties> advanced and change the com port to 4. It may tell u its already being used but don't worry it is fine. Save and exit device manager.
please bare in mind these are just my experiences on MY LG D802 however its worked every single time for me without fail and ive done it a good few lol.
HTH:good:
I followed this guide in order to root my brand new p8lite.
The thing is that now I have a black screen. If I plug my phone via usb, adb shows me that the device is in recovery.
By adb shows me that the device is in recovery I mean this:
Code:
# adb devices
List of devices attached
W3D7N16712000718 recovery
What I did:
Checked the model. It's an ALE-L21
Chapter 1: not a windows user, but managed to get adb up and running on my linux machine.
Chapter 2: everything went fine, bootloader unlocked
Chapter 3: my phone booted up just fine
Chapter 4: skipped it, as my phone was booting fine into system
Chapter 5:
So you want to convert to a single/dual sim?
Click to expand...
Click to collapse
My answer: "no thanks", so I skipped it
Chapter 6: I did the upgrade through OTA BEFORE reading the guide. Double checked I was running 6.0, so I skipped it
Chapter 7: Downloaded the file, flashed trought fastboot. And now I'm here.
I think I may have ****ed up things in the last 3 chapters.
What I tried to fix this:
Code:
# adb reboot bootloader
phone rebooted then huawei logo then blackscreen. adb still shows it's in recovery
After searching in the forum, I came by
Code:
adb reboot-bootloader
(notice the hypen). Firing that command put my phone into fastboot. Couldn't believe it, but I took the chance to flash the files found in chapter 4 (bootloader, recovery, cust and system, in this order). No luck, still reboot, logo, black screen
Now, no matter the presence of the hypen in the command, my phone keeps going into recovery (after the usual reboot, logo, black screen)
Tried to hold down POWER to shut it down. After a while it reboots, logo and black screen again. Laptop keeps saying device is into recovery
Tried to download the official 6.0 update, put on a sd card (dload/UPDATE.APP), held down POWER+VOLUP+VOLDOWN. Again, reboot, logo, black screen. recovery mode, again.
Frustrated, I unplugged the phone. After a while, it rebooted, logo and blackscreen without me touching it. Weird. It did it again a couple of times, but now it has stopped (with a black screen and, if plugged in, adb. says is into recovery)
I really don't know what to do, please help me.
UPDATE:
After leaving a night on its own, the phone was noticeably hot.
Also, when unplugged, if I hold POWER it shows me the logo a couple of time before going black screen.
Ok. But can you enter in recovery?
Another question: you said that u flashed the necessary files. What about flashing directly twrp as recovery, and from twrp make all wipes, and afther that flash from twrp some zip-ped firmwares?
tamaskurti said:
Ok. But can you enter in recovery?
Click to expand...
Click to collapse
Apparently yes (or at least, adb says I'm into recovery). However, I just get a black screen.
Tapping randomly on the screen doesn't give any kind of feedback (no vibration, no beeps, nothing).
tamaskurti said:
Another question: you said that u flashed the necessary files. What about flashing directly twrp as recovery, and from twrp make all wipes, and afther that flash from twrp some zip-ped firmwares?
Click to expand...
Click to collapse
Since I started having those problems after I flashed TWRP, I thought it was a better idea to flash stock recovery (alongside bootloader, cust and system) and restart from there.
I have the same issue...
Have you solved the issue? In case you solved, how?
mmennella said:
I have the same issue...
Have you solved the issue? In case you solved, how?
Click to expand...
Click to collapse
Not yet. I brought the phone to a local repair shop. Tomorrow they should bring it back, hope they have good news
Mmmmmm... I go to buy new One. Huawei must have a way to reflash, but i can't wait. Thanks a lot
Inviato dal mio Redmi 3 utilizzando Tapatalk
S1cK94 said:
Not yet. I brought the phone to a local repair shop. Tomorrow they should bring it back, hope they have good news
Click to expand...
Click to collapse
i brought it to my local repairshop and they sent my phone to manufacters central repair and they fixed it for free.
AfrikanDionysus Solution
Huawei P8 lites are region specific like Middle east asia america etc so before you go in make sure you know your build number in my case ALE-L21C185B560 its the UAE variant now if you've messed go to the huawei website download the rom specific to your region any other region won't work!!! get a clean sd card extract the file and copy it to the root of the sd card its normally an update.app inside a folder named dload shutdown the phone now press vol+ and vol - and the power button till it starts installing.. If you've messed up your recovery and can get to fastboot by plugging in the phone then pressing vol down and power.. use the Huawei extractor tool and extract the recovery from the just downloaded rom and flash it.. then retry the restore as stated.. im sure you can google all the tools you need to get so im not putting any links !!! Ahsante !:good::good::good:
Hey guys i really need your help, i decided to unlock the bootloader of my phone, and so i did without any issue, the phone opened and worked completly, so i wanted to relock it and so i did also without any issue, but i wanted root again so i tried to unlock it again with the same Code with the official unlocking way, but this time the phone have been stuck and red led notification blinking everytime i put in on computer.
If i plug off the power source and try to open the device the red light blink very fast and there is a charging symbol on the screen but then dissapers instantly and nothing the phone turning off.
I cannot enter on recovery or dload, anyone knows what to do? The PC cant recognize the phone if i plug it.
Here some video to check the issue, please turn on the subtitles because im speaking Greek https://www.youtube.com/watch?v=oTkx0ifNhg4
Also here https://www.youtube.com/watch?v=F9dS76eRe0c
Huawei is one of the worst companies i ever saw! Their phones are so easy to brick and they can't be fixed!
Wait until the battery drained and phone shutdown, connect charger again and wait for 5 minutes , it will turn on in erecovery , shutdown and redo fastboot etc carefully.
Dr4In said:
Hey guys i really need your help, i decided to unlock the bootloader of my phone, and so i did without any issue, the phone opened and worked completly, so i wanted to relock it and so i did also without any issue, but i wanted root again so i tried to unlock it again with the same Code with the official unlocking way, but this time the phone have been stuck and red led notification blinking everytime i put in on computer.
If i plug off the power source and try to open the device the red light blink very fast and there is a charging symbol on the screen but then dissapers instantly and nothing the phone turning off.
I cannot enter on recovery or dload, anyone knows what to do? The PC cant recognize the phone if i plug it.
Huawei is one of the worst companies i ever saw! Their phones are so easy to brick and they can't be fixed!
Click to expand...
Click to collapse
Dissconnect the usb cable and hold the power button. When it is just about to reboot, plug in the USB and hold the volume down button. This should take you to fastboot OR to error mode...
-------
Huawei devices aren't easy to brick, but recovering the devices is a pain... I hard bricked my device as well a couple weeks ago..
I have tried to wait for the battery drained completly and if you plug the usb while the phone is off the phone is powering on automatically and stays to the "Your Device has been unlocked"
Also with the same method before i plug in the usb i was trying to hold the volume down button and plug it in but it didnt happend it is booting on the same thing.
Dr4In said:
I have tried to wait for the battery drained completly and if you plug the usb while the phone is off the phone is powering on automatically and stays to the "Your Device has been unlocked"
Also with the same method before i plug in the usb i was trying to hold the volume down button and plug it in but it didnt happend it is booting on the same thing.
Click to expand...
Click to collapse
pls clear actual screen position of ur fone, unlock screen titled as fastboot and rescue or yellow text with black background.
chances are there u get fastboot connection by turning off mobile by power button hold for 7 seconds and phone turned off wait for a while ensure no USB cable connected to phone. then press volume down button and conect USB cable, you will see fast boot and rescue screen. now issue command fastboot devices. if u see ur devices serial number there then follow further fasboot procedure mentioned in other threads,
Fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system.img
above files may be obtained by extracting update.app for ur phone stock image by huawei extractor. you have to work for 2 days constantly for unbricking phone. I have gone through all these processes last week.
rizwansadiq said:
pls clear actual screen position of ur fone, unlock screen titled as fastboot and rescue or yellow text with black background.
chances are there u get fastboot connection by turning off mobile by power button hold for 7 seconds and phone turned off wait for a while ensure no USB cable connected to phone. then press volume down button and conect USB cable, you will see fast boot and rescue screen. now issue command fastboot devices. if u see ur devices serial number there then follow further fasboot procedure mentioned in other threads,
Fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system.img
above files may be obtained by extracting update.app for ur phone stock image by huawei extractor. you have to work for 2 days constantly for unbricking phone. I have gone through all these processes last week.
Click to expand...
Click to collapse
Hi, I have a similar problem: "your device has been unlocked and can't be trusted". I cannot enter fastboot nor with the two buttons method (power + volume down) or the three buttons method. I messed up with the EMUI, I guess. Infact, I unlocked the bootloader, relocked it and tried to unlock it again to flash a custom ROM. The first time I unlocked the bootloader, I tried to install TWRP but something went bad, I do not remember what, but I decided to relock.
Now I am stuck with this message. But....sometimes, I can't understand WHEN, I can enter my phone Last time it was when I tried the above solution (only volume down and usb cable, without the Power button). When the phone turned on, HiSuite recognized "a phone" was connected because the software turned on, but it couldn't really see it. I went into the Developer Options on the phone to turn on OEM, but it was grey and I could do nothing :crying:
Full of hope because the phone turned on, I then tried to flash the content of the SD Card (where I put files extracted with the Huawei Update Extractor) by holding the three buttons (power + volume up + volume down), but again it appeared the "your device has been unlocked" message.
Now the phone is off. Once, in the meantime, it appeared a red flash on the screen for one second, I am not sure it is related to the battery, it doesn't display a battery but only a flash.
I cannot enter fastboot in any way, I cannot flash from SD card, sure I cannot rollback because it implies flashing.
My only hope is some command to be given when I can enter the phone. Anyway, I sent it to repair (not official, I have obviously no guarantee anymore) and they sent it back to me: they didn't know what to do.
Any idea? Thanks a lot!
PS: I will read your replies as soon as I can but I have very variable ad unstable working hours!
Please don't blame Huawei for YOUR mistakes. Thank you
Johnny TDN said:
Please don't blame Huawei for YOUR mistakes. Thank you
Click to expand...
Click to collapse
Did I? Sorry if it seemed so, but of course are my mistakes...
help us
i have a same problem did you find solution
Same Problem Here
I have the same issue. Have anyone found a solution yet?
Dr4In said:
Hey guys i really need your help, i decided to unlock the bootloader of my phone, and so i did without any issue, the phone opened and worked completly, so i wanted to relock it and so i did also without any issue, but i wanted root again so i tried to unlock it again with the same Code with the official unlocking way, but this time the phone have been stuck and red led notification blinking everytime i put in on computer.
If i plug off the power source and try to open the device the red light blink very fast and there is a charging symbol on the screen but then dissapers instantly and nothing the phone turning off.
I cannot enter on recovery or dload, anyone knows what to do? The PC cant recognize the phone if i plug it.
Here some video to check the issue, please turn on the subtitles because im speaking Greek https://www.youtube.com/watch?v=oTkx0ifNhg4
Also here https://www.youtube.com/watch?v=F9dS76eRe0c
Huawei is one of the worst companies i ever saw! Their phones are so easy to brick and they can't be fixed!
Click to expand...
Click to collapse
I think the red light blinks cause you are critically low on power. Leave it plugged in. Ignore whats on the screen just leave it plugged in for a few hours and leave it alone.
Meticulus said:
I think the red light blinks cause you are critically low on power. Leave it plugged in. Ignore whats on the screen just leave it plugged in for a few hours and leave it alone.
Click to expand...
Click to collapse
Same here with a BLN-L21 (Honor 6x)
The phone will not charge with this method. Try to let it plug one night, and no charge !
@Meticulus this was the question felix ask you: is uboot (booting with sdcard) is possible ?
Fixed for me with buy an honor 9 ... but investigate to revive my honor 6x.
For now i have maybe found how to shutdown phone, to charge battery (with shurtcut two point in motherboard) but don't know if phone charge for the moment because there is no light
Solution for the moment but difficult AND / OR expensive ....
1. Remove emmc and repair it with a JTAG box.
2. Try to boot with uboot (but probably won't work)
---------- Post added at 03:32 PM ---------- Previous post was at 02:57 PM ----------
Dr4In said:
Hey guys i really need your help, i decided to unlock the bootloader of my phone, and so i did without any issue, the phone opened and worked completly, so i wanted to relock it and so i did also without any issue, but i wanted root again so i tried to unlock it again with the same Code with the official unlocking way, but this time the phone have been stuck and red led notification blinking everytime i put in on computer.
If i plug off the power source and try to open the device the red light blink very fast and there is a charging symbol on the screen but then dissapers instantly and nothing the phone turning off.
I cannot enter on recovery or dload, anyone knows what to do? The PC cant recognize the phone if i plug it.
Here some video to check the issue, please turn on the subtitles because im speaking Greek https://www.youtube.com/watch?v=oTkx0ifNhg4
Also here https://www.youtube.com/watch?v=F9dS76eRe0c
Huawei is one of the worst companies i ever saw! Their phones are so easy to brick and they can't be fixed!
Click to expand...
Click to collapse
Hello, can ask you some question about how you have hardbricked this phone ?
My honor 6x is same bricked, and red light too. So the big question is THE FIRSTIME BRICK = phone was FREEZE can't reboot and can't do nothing. I have wait for empty battery, and now dload and all is not working ?
I will try to charge my battery out of phone. For me it's like the phone never charge ... but i will try with a charged battery and plug unplug battery connector. It's like red screen low battery change boot mode ...
sanjay.rup said:
Same here with a BLN-L21 (Honor 6x)
The phone will not charge with this method. Try to let it plug one night, and no charge !
@Meticulus this was the question felix ask you: is uboot (booting with sdcard) is possible ?
Fixed for me with buy an honor 9 ... but investigate to revive my honor 6x.
For now i have maybe found how to shutdown phone, to charge battery (with shurtcut two point in motherboard) but don't know if phone charge for the moment because there is no light
Solution for the moment but difficult AND / OR expensive ....
1. Remove emmc and repair it with a JTAG box.
2. Try to boot with uboot (but probably won't work)
---------- Post added at 03:32 PM ---------- Previous post was at 02:57 PM ----------
Hello, can ask you some question about how you have hardbricked this phone ?
My honor 6x is same bricked, and red light too. So the big question is THE FIRSTIME BRICK = phone was FREEZE can't reboot and can't do nothing. I have wait for empty battery, and now dload and all is not working ?
I will try to charge my battery out of phone. For me it's like the phone never charge ... but i will try with a charged battery and plug unplug battery connector. It's like red screen low battery change boot mode ...
Click to expand...
Click to collapse
Its not actually mine and it was long time ago, but the owner told me that he unlocked bootloader with the official way, relocked, and then he unlocked again the third time the phone died.
Hello.
me too, he does not want to do anything anymore.
he only knows this '' your device is booting now '' screen with the red LED flashing.
whatever I do, it always starts on this screen. I think you have to change the motherboard.
Do you know where to find it at a reasonable price?
VNS-l31
Your device has been unlocked and can't be trusted
after i try to unlock my huawei P9 lite, my phone show this message "Your device has been unlocked and can't be trusted" and i can't restart or load from sd card.
i put update.app in new folder "dload", put the sd card in phone.... no boot. my laptop not detect usb phone. help me please.
ionut69 said:
after i try to unlock my huawei P9 lite, my phone show this message "Your device has been unlocked and can't be trusted" and i can't restart or load from sd card.
i put update.app in new folder "dload", put the sd card in phone.... no boot. my laptop not detect usb phone. help me please.
Click to expand...
Click to collapse
I fixed mine today. I just had to wait for 5 hours for the battery to drain. then when it shuts off i waited 10 min. after that i started the phone and i let me choose to continue to the phone.
I dunno if you have the exact same problem but thats how i fixed mine.
And after that i tried factory resetting (cause bluetooth and NFC didn't work) but then it got stuck again. so i waited it out and it worked once again.
Too scared to do anything to my phone now :/
alesbabnik said:
I fixed mine today. I just had to wait for 5 hours for the battery to drain. then when it shuts off i waited 10 min. after that i started the phone and i let me choose to continue to the phone.
I dunno if you have the exact same problem but thats how i fixed mine.
And after that i tried factory resetting (cause bluetooth and NFC didn't work) but then it got stuck again. so i waited it out and it worked once again.
Too scared to do anything to my phone now :/
Click to expand...
Click to collapse
now my battery is empty but when i plug in acc cable show same screen
any fix on this as I have the same issue with huawei p9 lite - no recovery mode, no usb reckognition from pc. Just stuck on that "unsafe" prompt screen after huawei logo
Stop buying huawei phones if you are into custom roms or root. They made the phone easily brickable and they removed the bootloader unlock site due to some stores installing malware into phones. But hey, they couldn't simply do what Xiaomi is doing eh?
So, I downloaded the A2017G B08 from this thread onto my SD card and went into the settings to update. All was fine until the phone got to the update screen and to 25% on the progress bar. Then the screen turned off, along with the phone. If I try to boot it, it's the same story. I see the ZTE screen, get to the update progress bar but it gets stuck on 25% and turns off. Kind of like a manual boot loop.
The phone isn't rooted or anything, I was downgrading to marshmallow to try and fix mic issues I was having earlier but never expected this.
Please help.
Thanks.
*deleted*
vesheljinn said:
So, I downloaded the A2017G B08 from this thread onto my SD card and went into the settings to update. All was fine until the phone got to the update screen and to 25% on the progress bar. Then the screen turned off, along with the phone. If I try to boot it, it's the same story. I see the ZTE screen, get to the update progress bar but it gets stuck on 25% and turns off. Kind of like a manual boot loop.
The phone isn't rooted or anything, I was downgrading to marshmallow to try and fix mic issues I was having earlier but never expected this.
Please help.
Thanks.
Click to expand...
Click to collapse
Ouch. We can try stuff but I never read anything like this here.
First try to access the recovery directly. I think it's Volume up and power, but if you get into FTM mode just try with volume down. If you can, then download B10 from the download center (it's weird that we have everything there and nobody uses it, it's frickin stickied on the Guides section for God's sake) or Nougat B04 and try to install it from an SD card.
If it doesn't work you have two ways to go: if the bootloader is unlocked, install TWRP via Controllerboy's guide (using axon7tool, it works every time)
OR
put your phone on EDL mode (Connect the USB cable to the PC, then hold both Volume buttons (NOT POWER) and insert the cable on the phone, and use MiFlash to get a working B10 on your phone. (there's a B10 package on 4pda)
If you choose the TWRP way you can install MiFavor 5.0 and be done with it. Or maybe a custom ROM, but if you didn't have any problem staying stock as it seems that you did, then you'll probably not like custom ROMs and their bugs
This is what I thougth as well. But his link only refers to B08 in MM. So he didn't want to install B08 on Nougat. As his bootloader is still locked he cannot install this ROM in no way.
Choose an username... said:
Ouch. We can try stuff but I never read anything like this here.
First try to access the recovery directly. I think it's Volume up and power, but if you get into FTM mode just try with volume down. If you can, then download B10 from the download center (it's weird that we have everything there and nobody uses it, it's frickin stickied on the Guides section for God's sake) or Nougat B04 and try to install it from an SD card.
If it doesn't work you have two ways to go: if the bootloader is unlocked, install TWRP via Controllerboy's guide (using axon7tool, it works every time)
OR
put your phone on EDL mode (Connect the USB cable to the PC, then hold both Volume buttons (NOT POWER) and insert the cable on the phone, and use MiFlash to get a working B10 on your phone. (there's a B10 package on 4pda)
If you choose the TWRP way you can install MiFavor 5.0 and be done with it. Or maybe a custom ROM, but if you didn't have any problem staying stock as it seems that you did, then you'll probably not like custom ROMs and their bugs
Click to expand...
Click to collapse
Hey, thanks for the response.
I downloaded MiFlash and got a working B10 but when I went to reboot the phone the screen wouldn't turn on, just the red LED was on. If I tried to go into recovery mode the phone vibrates and the LED flashes but it goes back to the same state. Also if I connect it to the PC and try and enter EDL mode there are sounds from windows that a USB device is being connected but that's it. MiFlash can't recognise the phone.
vesheljinn said:
Hey, thanks for the response.
I downloaded MiFlash and got a working B10 but when I went to reboot the phone the screen wouldn't turn on, just the red LED was on. If I tried to go into recovery mode the phone vibrates and the LED flashes but it goes back to the same state. Also if I connect it to the PC and try and enter EDL mode there are sounds from windows that a USB device is being connected but that's it. MiFlash can't recognise the phone.
Click to expand...
Click to collapse
I just had this issue, I plugged the phone into the orginal charger and for a legit 60sec held volume up and power button it will eventually power on .
jjallday said:
I just had this issue, I plugged the phone into the orginal charger and for a legit 60sec held volume up and power button it will eventually power on .
Click to expand...
Click to collapse
Did that for ~2 minutes, still nothing. Forgot to mention, when I connect it to the PC I get Handset Diagnostic Interface as a connected device.
vesheljinn said:
Did that for ~2 minutes, still nothing. Forgot to mention, when I connect it to the PC I get Handset Diagnostic Interface as a connected device.
Click to expand...
Click to collapse
hmm well idk i had this problem earlier today, even when i had mine connected to the pc the pc would make a noise as if the phone was turning on, but when i connected to the actual charger is when the 60sec thing actually worked , also i noticed that when i finally got it on the battery was down to 1% maybe some sort of battery issue. maybe let it set on the actual wall charger for awhile and try again.
vesheljinn said:
Did that for ~2 minutes, still nothing. Forgot to mention, when I connect it to the PC I get Handset Diagnostic Interface as a connected device.
Click to expand...
Click to collapse
Do the 4th category brick repair guide. Yes,you have to tear apart the phone, but I did this and didn't break it idk
No USB jigs or weird cables will work, you need to use the test pad to get into EDL.
There is another way though: it seems that if you discharge the phone completely, then hold vol down and power, and try a bunch of times, you might be able to get into FTM mode. You'll have adb from there, so you can do 'adb reboot edl' and use MiFlash to fix the software. But I haven't tried