Database Users

slow / laggy when charging S2

have anyone got issues with S2 when plugged into power?
ie when I start recharging direct from 240V adapter, my S2 started getting VERY laggy and slow.
It immediately goes back to normal response when I unplug power.

I have never problem like you

mtrax said:
have anyone got issues with S2 when plugged into power?
ie when I start recharging direct from 240V adapter, my S2 started getting VERY laggy and slow.
It immediately goes back to normal response when I unplug power.
Click to expand...
Click to collapse
Try using an alternative charger...probably your mains charger or the usb connector on the charger is damaged.

I'm pretty sure its a issue with the s/w as I have used the charger on another phone without any issue.
unless its one of the apps I'm using, not sure how to narrow it down.

mtrax...
I have the same issue.
You´re not alone...LOL

FYI the common issue I have when plugged in is that its not easy to unlock screen, takes me a 2-3 swipes to unlock screen and after that it seems that it ignores every other key press..
Any one reported this to Samsung? I will try to log a ticket to see what happens.

Try do a multi touch test while its plugged in see if the screens acting funny.

how do I do a multi-touch test?
what will that prove? as the screen works fine when unplugged.

I have the same issue but only when charging with the usb lead (with usb power adapter) instead of the standard mains charger. Think it might have stopped now that debugging is enabled and the Samsung kies screen doesn't come up when i connect the usb.
Sent from my GT-I9100 using XDA App

Took my phone 2 hours to charge from 36 % to 100 %

note this issue doesn't occur when charging via PC ONLY via 240V mains, but let me try with USB debugging on.
edit tried USB debbuging still has issue.
Note is the 240V USB cable different from a normal USB cable? ie perhaps the device thinks its a PC connection

the phone is laggy because of the electrical interference from a faulty charger or some other electrical equipment in the near vicinity...
Please note that actually the capacitive touchscreen becomes laggy not the applications/services...
keep it away from the electrical interference...use the samsung original charger..gud quality USB cable....and the issue will be gone... for sure

looks like its the charger, the A/C adapter I got with the phone was UK which is why I didn't use it to begin with, but tried the samsung one with a UK/AU adapter and its fine..
hmm who would have thought that was the issue...
interesting it didn't affect my other HTC phone.

Same issue here, but something special:
I ebayed another charger for my sgs2, original samsung one. Same serial number, same description, same style.. but i got the charging problem only with the new one.
With my original charger (the one, which was delivered with the phone) works fine. No slow and no lag.
The new one was about 5 euro, seems to be an original...

to demonstrate my point that its the electrical interference from the dodgy chargers onto the capacitive touchscreen... do this and report back...
plug the faulty charger onto the socket BUT DO NOT charge the phone with it...
keep the phone near to the charger wires etc....(not in charge)... you will see the screen lagging sometimes unresponsive...
now move the phone away ...it will work fine..
you can keep on using the dodgy chargers for charging...but use the phone only after it has been charged and is away from the charger...

woodstock_ahem said:
to demonstrate my point that its the electrical interference from the dodgy chargers onto the capacitive touchscreen... do this and report back...
plug the faulty charger onto the socket BUT DO NOT charge the phone with it...
keep the phone near to the charger wires etc....(not in charge)... you will see the screen lagging sometimes unresponsive...
now move the phone away ...it will work fine..
you can keep on using the dodgy chargers for charging...but use the phone only after it has been charged and is away from the charger...
Click to expand...
Click to collapse
I am not able to reproduce that with my original charger. There is no lag or any other problem. Switching to my second "original" (ebay 5 €uro) samsung charger leads me direct to the lag and your description. First i thought my second one is not an original one, but because of your description there seems to be a diffrent quality on the original charger depending on it production date.. unit.. charge.. or whatever.

I bought a sgs2 from the UK, and have a UK to AUS converter on the stock charger and I have no lag when it's charging or near chargers.

Sorry. Not a problem here. Writing now and plugged. Very responsive.
Sent from my GT-I9100 using XDA Premium App

The electrical interference with the capacitive display is bullcrap since it needs electrical properties to respond. So it depends on whether your body has enough electrical properties.
So back to the point:
It is due to CPU reducing the clock speeds to prevent the phone from overheating as the battery itself produces enough heat anyway.
Many other people may not notice it since they may not perform intensive tasks while the phone is plugged in and the variation itself is also almost unnoticeable.
I have the same issue but as I said, it's almost unnoticeable to even bring it up in this forum. I haven't done any testing myself to prove this, but the same safety feature is implemented in most modern phones.

I have the same issue - I also had this issue with my Atrix.

Troubleshooting - a500 won't charge - Is my power supply or tablet dead

As of last night my A500 will not charge. I left the device overnight and unfortunately now have Zero charge.
- My charger makes a noise, I think it always did, so I'm assuming the charger is OK.
Can anyone confirm that the chargers give off a kind of electrical buzz when working?
- I get no light at all on my A500. If the charger is OK I'm thinking something has gone within the tab, be that circuit or battery.
Any ideas or tips here?
- Sadly I do not have a multi-meter to test either the charger or the tab, no friends with a similar device, I've lost my proof or purchase (which is painful and rules out warranty), and am a bit stuck what to do.
Any ideas?
- I've heard/read that allowing the power to drop too low can cause a problem. Obviously Zero is bad in this case.
Can anyone confirm this rumour or suggest a fix?
- I did try entering recovery and resetting the battery stats - whether this made things worse or not is unclear - it certainly did not help.
ANY HELP OR IDEAS WELCOME (bear in mind that I have spent quite some time searching and trying other peoples' ideas already though.
Thanks,

ta-wan said:
As of last night my A500 will not charge. I left the device overnight and unfortunately now have Zero charge.
- My charger makes a noise, I think it always did, so I'm assuming the charger is OK.
Can anyone confirm that the chargers give off a kind of electrical buzz when working?
- I get no light at all on my A500. If the charger is OK I'm thinking something has gone within the tab, be that circuit or battery.
Any ideas or tips here?
- Sadly I do not have a multi-meter to test either the charger or the tab, no friends with a similar device, I've lost my proof or purchase (which is painful and rules out warranty), and am a bit stuck what to do.
Any ideas?
- I've heard/read that allowing the power to drop too low can cause a problem. Obviously Zero is bad in this case. Y
Can anyone confirm this rumour or suggest a fix?
- I did try entering recovery and resetting the battery stats - whether this made things worse or not is unclear - it certainly did not help.
ANY HELP OR IDEAS WELCOME (bear in mind that I have spent quite some time searching and trying other peoples' ideas already though.
Thanks,
Click to expand...
Click to collapse
Quit guessing and get the charger checked

In reply to myself and to help those with a similar issue.
Yes a charger my buzz when good OR bad. The trick to seeing whether it is working or not (aside from it charging the pad) is to see if it gets warm -- no warmth, probably broken.
As for measuring with a multimeter the trick is to insert a paper clip into the small hole in the plug and measure the voltage between the outer plug (negative) and the paperclip (linked to the positive). Few multimeters have pins that will fit inside the super tiny plug on the A500 charger so the paperclip is your way in - obviously be sure not to short circuit the thing!
There are many chargers available out there. In Australia Jay-Car and **** Smith both have perfect chargers, the correct type, voltage, amps etc, they even come with multiple pins -- sadly none fit the A500!
My solution was to go to Infinity who are a provider of Acer spare parts. They have the correct charger and are easy to deal with BUT -- It's not cheap! They want $40 for the charger and a further $30 for the little bit on the end that gives the plug its nationality. In most cases we do not need this though as we can reuse our old one, but hey, not cheap all the same.
Still, it works and I'd rather be ripped off than get the wrong thing and blow the mother board.
NOTE: if you do get a charger from anyone other than Acer or a supplier of theirs - be sure to match every detail of your current charger - especially polarity.

I had problems with charging on my A500. When I plugged in the charger the power button would turn orange for a few seconds and then start flashing white.
I took the back cover off and found that the wire to the centre pin of the power connector on the tablet had almost broken off. I touched it lightly and it came away. Re-soldering the wire fixed the problem, it now charges as expected.
After fixing it I measured the charge current. It starts at a small value for a few seconds and then jumps to full charge rate. It seems there was enough of a connection to handle the small current but as soon as it switched to full charge current the voltage drop across the remains of the connection was too much and charging stopped.

Charging problem
I too just experienced the no charging problem. I looked up how to open up the tablet and tried to trouble shoot the problem myself. My problem turned out to be a very easy fix. The Posative lead on the back of the charger port had come loose, a simple touch of the soldering iron and its fixed. I thought since I had it open I might as well go ahead and change the battery too since it was 4 years old. Its an old tablet and time to turn it into a hand me down for a lucky niece or nephew

The digitizer(touch screen) going crazy when plugged in and charge on D802

This happens every time on every ROM since on stock days buy I just realized recently that only when it's charging and it's getting worse to the point of unusable lately.
The responsiveness is very noticeable with dragging action, I tested it with touch screen test and when I drag my finger across the marker skips and shows imaginary second fingers, It doesn't happen when plugged and not charging. When unplug it is working fine as it should. Does anyone have this experience? fix? This is making me creazy. Thanks!

It's your charger. I'm willing to bet you're using a cheap one from china. The cheap ones put nasty voltage spikes into your phone that interferes with the touch screen digitizer.
Use the original charger or find a reputable one online.

Turbo Charging not working

Hello.
I recently Replaced my broken LCD Screen. and installed multiple ROMs. and now when I connect the OEM 25w motorola turbo charger it gives a message that turbo power is connected but It charges very very slowly.
I used various ROMs in the last couple of days
AICP 5/18 -5/25 - 6/7
RR 5.8.3
but now I'm on Turbo Pure 2.9 with Stock Kernel and systemless root that came with the ROM
Also when I replaced my screen the plastic that was holding the battery to the middle frame broke but all the connectors are fine and everything is back in place.
Does anyone have any idea what could make the phone charges that slowly
BTW the charges itself is working fine on other phones
I tried wiping cache /delv - removing xposed
nothing helped

First... Please do not double post, this forum is busy enough that if you ask a semi-informed question you will get a response within a few hours, asking in more than one thread it just causes confusion.
Turbo charging slowly is usually one of 4, maybe 5, issues... Charger, cable, USB port or battery or its connection, and a remote possibility its the mainboard... It isn't software obviously, isolate and eliminate possible failure points, once you have eliminated everything you can, you know what to replace. If you get down to just internals, start with the cheapest, easiest component and work up from there.

Nexus 6 battery replacement and charging issues

Long-time lurker, first-time poster. I've gotten a lot of good insight from reading posts and figured I would join to share what I've learned.
Its a long one and if you get all the way through it you will understand why.
Nexus 6 XT1103 with original battery running stock 7.1.1. Started showing issues in early 2020. Apps would be slow to respond. Camera would take forever to open and take a picture. Scrolling through news feed would be annoying because it would register my scroll as a tap into a news story. Weird static sound coming from speakers during scroll. Phone started to shut off on its own at around 20-30%. Installed Accubattery and it showed battery was at about half its original capacity. Progressively got worse throughout the year. Got to the point where it would shut off around 50% or even at 80-100% if opening something that would result in high CPU use spike. It was time to replace the battery.
Looked up battery recommendations. Ebay batteries seemed iffy. Initial install reviews would be fine but some reports of lasting for a year and then crapping out, or just no long term follow-up. Review of Akku Polarcell for a Nexus 5 seemed promising. Email to Wannasee was answered quickly. Batch of batteries they were offering was made in late 2019. They could have just made that up but I had no reason to doubt them. Looks like an actual brick and mortar operation. Ratings are pretty high. $10-15 for unknown battery off Ebay vs $35-40 for something made in 2019 from a reputable vendor. I decided to go with the Polarcell. Bought it after trying to open the phone up the first time to make sure I could. Could have bought the Polarcell from Wannasee’s store on Ebay. Waited for one of those mythical Ebay coupons to show up in my inbox but that never materialized, by which time the phone was really in bad shape. Compared the price for buying the Polarcell off of Wannasee’s Ebay store to buying directly from Wannasee’s site. Went with the direct buy since it was a buck or two cheaper with the exchange rate at that time and I didn’t have any Ebay coupons to use anyways. Paypal payment using credit card. Pay attention to currency conversion setting in Paypal. Was better for me to have my credit card do the conversion rather than let Paypal do it, but that’s because my card doesn’t charge foreign transaction fees. Came out to $36.68 when I bought it. Their email comm is pretty good. They let me know when it was going to ship, when it shipped, when it was expected to arrive and provided a tracking number.
By the time I was ready bite the bullet and buy the battery, the phone wouldn’t even recognize the charger. Went through multiple chargers and cords trying to figure that out. Seemed possible that it was cord or USB port related. Sometimes if the cord was held just so it would charge. Got to a point where it wouldn’t charge at all while on. Wouldn't even recognize the charger was plugged in. I did figure out that it would charge while off, but even that was hit or miss (more hit than miss though). Even while off it did seem like it wanted a higher output charger. I had been using a 1.5A HTC charger mainly. Eventually that didn't work. I tried 2A Samsung and that didn't work. A 4A Asus charger seemed to work the most reliably. So at this point I am debating whether its worth it to buy an almost $40 battery if something is seriously wrong with the phone. What made it worse was that my first attempt to open the phone ended up slicing through a flex cable part of the wireless charging coil. So I could have tried to figure out whether the charging issues were due to the USB port by trying a wireless charger, but not anymore! I was using plastic cards to separate the back from the frame; nothing metal. But the amount of force required to push through the glue was enough that when it broke through the card slipped and it was enough to slice through the thin plastic and copper of that ribbon. Irritating due to the loss of ability to troubleshoot the charging issue further, but I wasn't too burned up about it because I never use a wireless charger so I just took it out and left it out. Works fine without it, except of course no more wireless charging ability.
Looked up lots of videos on how to open up the phone. Most helpful ones were:
Most warn about the cable for the power and volume buttons; rightfully so. None mentioned the wireless charger flex on the opposite side. The power/volume ribbon did get a decent crease into it as well, but luckily no damage. Straightened it out and it works fine.
22 screws. They are tiny but they come out easily. Pretty much everything I read and watched said they were T4 screws, but at least with my screwdriver kit the T3 bit is the one to use. Besides getting the back off the rest of opening the phone to get the battery out was pretty simple. The videos say to separate the two halves of the power/volume ribbon where they intersect but I didn't have to do that. I just removed the end that plugs into the board. Seemed easier than messing with the tiny connector at the intersect and it was. Removing the battery connector didn't work how it should have. The plastic had become brittle with age and just broke apart when prying at it from the opening in the frame. Had to get under the frame and pry it off from the back side of the connector where the ribbon cable goes into it. By the way, by luck I had a decent charge on the old battery before removing it. More on why that was important later.
The Polarcell didn’t come with a curve in it like the OEM battery; it was just flat. But it wasn't hard to massage the edges down. Used the old battery as a guide to bend the new battery into shape. Other than that it went in just fine. Ribbon cable was already folded in the right direction so it just plugged right in. Frame went back into place without any interference. The phone turned on just fine. I dont remember if it charged while on that first time, or if I had charged it while it was off. Probably the latter. But it went to full charge. I did get a capacity reading from Accubattery so it was charging while on. It was in the low to mid 90s vs the rated capacity. That was worth it for me. The phone didn't shut off randomly anymore. The apps were quicker. The camera took pictures the way I remembered it used to. No more static noise. But the charging issue was still there.
The back came off a few more times after that as I tried troubleshooting as best I could to see whether there were any issues with the charge port. There were no visible issues. I did end up picking out some dust with a needle, but not any significant amount that would have explained why it wasn't recognizing being plugged in while on. I probed with a meter on the backside of the USB port while the phone was apart and plugged in to make sure voltage from the charger and cord was coming through. No issues there, but also not advisable to do. The contact points that need to be probed are very tiny and very close to other things. I was lucky I didn't short the 5V to anything important. Pretty sure I did short it at least once and it didn't do any damage, after which I stopped while I was ahead. Cleaned out the port with an old toothbrush dipped in isopropyl alcohol. That definitely seemed to help it charge more reliably while off, but it still wasn't charging while on.
I’ve read posts that suggested the charge port was bad and needed to be replaced, but the fact that the 5V was coming through the USB port meant it had to be something else. Before I had opened the phone up the first time and was troubleshooting this problem I had tried a full reset. Backed up the whole phone manually. It wasn't rooted at that time. At the same time I unlocked the bootloader to get ready to root it once I replaced the battery because I wanted to use a charge limiter with the new battery to extend its life (whether or not that actually works to extend the life I don’t care, its worth the tradeoff to me). The factory reset had made no difference to my charging issue. I had not reflashed the factory image at this point. I was just doing a factory reset with the image that was already on the phone.
After I replaced the battery and it was still having issues, I tried flashing the factory image. Even going in and wiping cache and data through stock recovery made no difference. In addition to charging issues while on there would also be connection issues. It would connect and disconnect if the USB cable was not held in the right way. Not the ideal condition to be flashing a ROM but I managed to keep it connected for long enough. This was not just once. I tried a couple different methods. The first probably was using the Nexus Root Toolkit. Then when that didn't work I went in and manually flashed each file with adb from the command line. At some point I had gotten it to a condition where I did not recognize what it was doing during boot and it was just sitting on the Google screen before the animation starts. Didn't realize then that it should not be on this screen for long. I let it sit like that overnight. I had it plugged in to a charger but I had no way of knowing whether it was charging… it was not. Drained the battery just sitting on that screen all night. Phone came apart again. Battery was down to 2.7V and the phone would not charge. Green light in the speaker came on once (I didn't even realize that light was there before this). It would charge a bit, screen would come on and then immediately die. Started looking up how to charge a Li-Po battery outside of the phone. Eventually my brain cells started working and I pulled out the new battery and put the old battery back in. It had a 4V charge in it still. Was able to get the phone to boot into the OS for the first time after the ROM flash. Turned phone off, pulled old battery out, put new battery in, plugged it in while it was off and it started charging. I kept the back off and had a fan blowing across it while it charged to make sure it didn't get hot. It charged to full. I pulled it out again to see that I hadn't done any permanent damage. It felt the same thickness as before. Nothing was swollen. Will eventually know for sure when I have some more charge/discharge cycles on it, but I think it will be fine since it wasn't discharged lower than 2.7V.
Phone back together. Still only charging while off. Last thing to try is what other posts were skeptical about working. Time to root in order to get access to the batterystats files. Tried to flash TWRP to recovery. It would take but it would not stick. Tried a few times and then gave up and moved on to installing Magisk without it. Turns out Magisk will work just fine with the stock recovery. Used Magisk to patch the boot image. Flashed the patched boot image with adb (still with a wonky USB connection that seemed like it needed to be held just right, but it was only 8meg so it flashed fast). Went with FX File Explorer to browse root. Navigated to data/system folder and moved the three batterystats files off the phone. Kept the files on my computer just in case something went south and I needed to put them back. Rebooted the phone. Booted up without any issues. Plugged in the charger. Recognized immediately and started to charge while on for the first time in a long time. But then it would do the same thing again where the next time I tried charging it would not. It would recognize its plugged into power but would not charge unless I turned the phone on. After a while I realized it would charge while on if I just rebooted it. I still haven’t figured out why this is happening, but its a minor inconvenience. Went through a few weeks worth of charge cycles and Accubattery is showing the Polarcell is at 95% health which seems good to me. I also installed Battery Charge Limit and set it to 80%. Whether or not that’s really going to extend the life of the battery I don’t know but its working fine for me. I get more than a full day out of it before I have to charge again, but I’m not really putting a heavy load on it.
This summarizes troubleshooting and fixing that spans at least three months, for an issue that has been going on for about a year. I’m sure a lot of the issues I had are interrelated. There were definitely a few red herrings along the way. There is no physical damage to the USB port or cables or chargers even though the behavior would have indicated there was. I’m sure the old battery caused issues with either corrupting the batterystats files or just loading it with bad data, and that somehow caused the charging issues I was having. That also seems like it was causing general connectivity issues via the USB port.
Normal people would not go through this much trouble for a 6 year old phone that was presenting so many problems. Safe to say I’m not normal. But I like fixing things and I don't like waste. Hopefully this experience, or at least portions of it, helps someone else keep their Nexus 6 going or maybe even other phones since none of the issue I encountered seem to be specific to the phone.

Quite an adventure!
I would think that your USB connector is physically damaged. You should not have to fiddle with the cable to flash a rom, and also, charging isn't just passing 5V to the phone, it checks the data lines as well to identify the kind of charger.
People say that it is possible to replace the USB connector, but I guess you need to be a real pro at soldering. Maybe a repair shop can do it.
Replacing the charging coil is probably easier - I've done that, though it took some tries before I got the connectors aligned.

It could be the connector or it could be something further downstream (inside the phone). The connector looks physically fine; nothing obvious. Either way, if that's the issue it will be time for a new phone. I've seen those videos and that is well beyond my capabilities. The coil seems simple enough to replace but I've never used wireless charging anyways so I am fine without it.
However, I tend to think its more software related than hardware related just because I can do nothing else besides turn the phone off and it will start charging just fine. I have stood absolutely still, not moving the phone or cable at all and just turned it off and it will start to charge. And when I turn it back on it will still be charging and recognize that it is charging vs before turning it off it would seem like it recognizes its plugged into a charger but it would not be charging (Battery Usage screen goes from telling me how much time it estimates is left with the charge the battery has on it when the cord is not plugged in to saying "Not Charging" when the cord is plugged in).
Any pointers on where to read about how the operating system controls charging? I'm running stock 7.1.1 (N8I11F) with bootloader unlocked and Magisk installed.
Also, what controls charging when the phone is off? I'm assuming that its not the OS.
Thanks

You can always try clearing the bootloader logs:
[Q] Dying at 17% battery
My Nexus 6 is dying at around 17% battery. I've tried using battery calibration apps to fix it but they haven't worked. I've also factory reset, and went from LMY47D to LMY47M, both of which would die at 17%. Any suggestions?
forum.xda-developers.com
That should reset the battery status. It doesn't delete any user data.

I had tried clearing the bootloader logs before, and have tried it again. I had seen a response on a post (that i can't find anymore) that suggested the logs were cleared during a power cycle anyways. Not sure if there's any truth in that, but that's why i thought charging while powered off was working. However, i think i'm agreeing with you now that its the charge port. Last week it stopped working on the charger/cord combo (4A Asus charger and cord that came with some other device) that was reliable up to that point while powered off. Now it will only charge if i push in the cord real hard (won't work with the cord i was using, now i'm back on the OEM cord still with the 4A Asus charger). I think once this method stops working it will be time to move on to another phone.

Any battery recommend ?

I like the Polarcell. Accubattery says its at 94% health (3000mAh compared to the 3200mAh design rating). It hasn't changed since I first installed it two to three months ago. I don't use the phone for anything much more than phone/text/email/alerts so I don't have much screen-on time. I have other devices for that. With that lite use it will take two full days to drop about 50% charge before I put it back to charge. Phone is just as responsive as when I first got it. No random shutdowns or app crashes.

Vincent Adultman said:
I like the Polarcell. Accubattery says its at 94% health (3000mAh compared to the 3200mAh design rating). It hasn't changed since I first installed it two to three months ago. I don't use the phone for anything much more than phone/text/email/alerts so I don't have much screen-on time. I have other devices for that. With that lite use it will take two full days to drop about 50% charge before I put it back to charge. Phone is just as responsive as when I first got it. No random shutdowns or app crashes.
Click to expand...
Click to collapse
Thanks for your post. Which ROM are you using?

Stock, 7.1.1, N8I11F