Related
I flashed my note 4 n910f BOG with the Kyubi ROM Port N5 ( http://forum.xda-developers.com/note-4/snapdragon-dev/kyubi-rom-port-n5-n910f-coj3-v5-t3254964 ) using odin but after that my note 4 starts to lag and reboot several times so i wanted to reflash it with the stock rom 5.1.1 BOG found in sammobile but even after that my note 4 lags a lot and reboots by itself and one day it stops and never boot at first I though that my motherboard was bricked but when i plug it to PC it shows that there is a RELINK HS-USB QDLoader 9008 mounted under Ports (COM and LPT) in device manager.
I need a debrick.img for my N910F to resolve this problem using an SD card 32gb.
Please help.:crying::crying::crying::crying::crying::crying:
Brother did u find anything i have the same problem i was looking for a month and i didnt find anything !
I have the same thing, the exact same thing since a couple of weeks and cant find a solution. All i get is mmc read error. Cant flash a stock rom either. Some help would be appriciated.
Thanks in advance
TheOne741 said:
I have the same thing, the exact same thing since a couple of weeks and cant find a solution. All i get is mmc read error. Cant flash a stock rom either. Some help would be appriciated.
Thanks in advance
Click to expand...
Click to collapse
A friend come to me with a note 4 exactly like your with emmc read error. I tried flashing stock rom but no result. After that i flashed stock rom 4 files version with PIT and repartition ... but nothing. The trick with what i succeded was to flash stock rom with odin 3.10.6 and when the flashing process starts just tap the screen from 10 to 10 seconds until the process succeded. I know it seems stupid but this saved the phone. Homewer after 3 weeks my friend called me and said that the phone completly died. And one more tip, remove and put back battery between each attemp to flash stock rom with odin.
I think this can help us... Just take the bootloader from here and the pit and guide from attachments and try it. it may save your phones.
One more thing.. Here are the .SDC files for direct sdcard boot repair. So choose what sdc you need and try to flash.
The flash procedure is this:
1.Put the .SDC file to your sdcard (sdcard must be formated as FAT32 and must be SDHC max 16GB)
2.On the phone press VOLUME DOWN + HOME + POWER
3.If all is ok the phone will display SDCARD MODE and will try to flash the phone with the file provided to sdcard
4. IF the process went ok now you have to flash the phone with odin and stock rom.
If the phone didnt boot to SDCARD Mode you will need a USB JIG that you can buy from ebay or somewhere else...
I hope this help you.
http://forum.xda-developers.com/note-4/help/hard-bricked-note-4-sm-n910f-qualcomm-t3393104
---------- Post added at 03:19 PM ---------- Previous post was at 03:17 PM ----------
The only way is that file I shared or a USB JIG.
Thank you all for your help. Today i delivered my phone to samsung for repairs in the hope that it has warrantee. Will hear from them within 2 weeks. If they wont repair within warranty i will try this. Keeping my fingers crossed.
Sent from my iPhone using Tapatalk
Maybe someone knows more than i do. Will my custom rom flashing behavior affect the longevity of my beloved phones motherboard? I tend to do that a lot. I come from an HTC where there is no lock in the boot-loader anymore and am affraid that my flashing frenzy might have broken my phone. It shouldn't play a role, should it?
scamex said:
One more thing.. Here are the .SDC files for direct sdcard boot repair. So choose what sdc you need and try to flash.
The flash procedure is this:
1.Put the .SDC file to your sdcard (sdcard must be formated as FAT32 and must be SDHC max 16GB)
2.On the phone press VOLUME DOWN + HOME + POWER
3.If all is ok the phone will display SDCARD MODE and will try to flash the phone with the file provided to sdcard
4. IF the process went ok now you have to flash the phone with odin and stock rom.
If the phone didnt boot to SDCARD Mode you will need a USB JIG that you can buy from ebay or somewhere else...
I hope this help you.
Click to expand...
Click to collapse
Do I need to burn it on SD card or just copy it and what software should I use ?
heeelp
IronDrass said:
Do I need to burn it on SD card or just copy it and what software should I use ?
Click to expand...
Click to collapse
very good question
ill try both methods ann then tell you
---------- Post added at 12:14 PM ---------- Previous post was at 12:12 PM ----------
good question
i dont eaven know how to flash it
IronDrass said:
Do I need to burn it on SD card or just copy it and what software should I use ?
Click to expand...
Click to collapse
Copy paste !
i tried both methods
neither worked for me
plus my note 4 got bricked while updateting from 5.0.1 to 6.0.1
and it has 32 gb
th file says 4.4.4 16 gb
are you sure it is the right files ?
ps im about to go to a guy wohs gonna let me try to flash the bootloader and the pid file to my sd with his working note 4
if i can ill upload the sd contant up for every body
ladres said:
i tried both methods
neither worked for me
plus my note 4 got bricked while updateting from 5.0.1 to 6.0.1
and it has 32 gb
th file says 4.4.4 16 gb
are you sure it is the right files ?
ps im about to go to a guy wohs gonna let me try to flash the bootloader and the pid file to my sd with his working note 4
if i can ill upload the sd contant up for every body
Click to expand...
Click to collapse
Did you found a solution for your Note
lol sorry for not answering
yes i did
i used the pid file with odin and wrote the bootloader to my micro sd
if anybody whats the files
let me know
ladres said:
lol sorry for not answering
yes i did
i used the pid file with odin and wrote the bootloader to my micro sd
if anybody whats the files
let me know
Click to expand...
Click to collapse
Could you elaborate on how you did this?
Also, can you upload the content on the SD if you can?
---------- Post added at 06:40 PM ---------- Previous post was at 06:34 PM ----------
ladres said:
lol sorry for not answering
yes i did
i used the pid file with odin and wrote the bootloader to my micro sd
if anybody whats the files
let me know
Click to expand...
Click to collapse
Also, if you can, Download this, install it, connect the SD Card to PC directly, choose the drive on which the SD is mounted in the "Device" option and click on "Read". It will create an img file which I can then write onto my sd card. If you can do this, it'd be a big help
ladres said:
lol sorry for not answering
yes i did
i used the pid file with odin and wrote the bootloader to my micro sd
if anybody whats the files
let me know
Click to expand...
Click to collapse
Please share those files and the method used!
I've had these same kind of symptoms for a few weeks. Then I flashed Debloated ROM v5 and got Wake lock app from the Google play and while maybr this is a work around, my phone has been flawless ever since wake lock was installed. Flashing didn't cause any problems.
ga4a89 said:
I've had these same kind of symptoms for a few weeks. Then I flashed Debloated ROM v5 and got Wake lock app from the Google play and while maybr this is a work around, my phone has been flawless ever since wake lock was installed. Flashing didn't cause any problems.
Click to expand...
Click to collapse
Bro, we're talking about hard-bricked devices. No power, no recovery, no download mode. How are we supposed to flash your ROM?
What we are looking for is a fix for hard-bricked N910F. Do you have it?
scamex said:
Copy paste !
Click to expand...
Click to collapse
Copy-paste won't work because SDC files are dedicated for ATF box and related ATF software. Don't waste our time.
Hi
I'm struggling with updating my P8 Lite (Austria, single sim) and I would appreciate your help.
I downloaded the newest firmware C432B170 from the Austrian Huawei website but I just can't update.
Tried with the Updater's local update but it didn't work.
Tried with force update and that didn't work too.
I have unlocked bootloader, root and TWRP.
Can somebody help me out??
grzdom said:
Hi
I'm struggling with updating my P8 Lite (Austria, single sim) and I would appreciate your help.
I downloaded the newest firmware C432B170 from the Austrian Huawei website but I just can't update.
Tried with the Updater's local update but it didn't work.
Tried with force update and that didn't work too.
I have unlocked bootloader, root and TWRP.
Can somebody help me out??
Click to expand...
Click to collapse
Ok, so this i fearly easy... (once you know it).
the problem is that you tried installing a European dual sim build on a Austria single sim build.
That's not gonna work does it?
1. make sure your device is a Ale-L21 (settings -> about phone -> modelnumber)
2. boot into twrp and wipe everything except sd card.
3. boot into bootloader (twrp can help you with it or just plug your device into the computer and power it on while holding volume down)
4.download this file
5. open the 'FLASH ALL' file in the folder and read the instructions on your screen
6. boot up your device and see that you have the balong bug and no reception. (settings -> about phone in the buildnumber it should say balongXXXXX)
7. take the file in the attachement of this post and unzip it
8. put the unzipt directory in the root of your sd/internal memory
9. go to settings->upgrade->menu->lokal update
10.select 'UPDATE.APP'
11.wait for it to start.
12.once it starts the balong should be gone in buildnumber
13. use the updater to update trough b170 if that doesn't work download it here and extract it and set it in a folder named dload on your sd/internal memory (delete the first file first) the do a lacal update to b170.
14 eat a sandwich because this is gonna take some time and by now you should be hungry
15. everything should work now. you should have 2 imei's and receptions.
make sure you got minimal adb installed (normally you do)
if you have location issues you can chance it by following this thread.
Lordbannakaffalatta said:
Ok, so this i fearly easy... (once you know it).
the problem is that you tried installing a European dual sim build on a Austria single sim build.
That's not gonna work does it?
1. make sure your device is a Ale-L21 (settings -> about phone -> modelnumber)
2. boot into twrp and wipe everything except sd card.
3. boot into bootloader (twrp can help you with it or just plug your device into the computer and power it on while holding volume down)
4.download this file
5. open the 'FLASH ALL' file in the folder and read the instructions on your screen
6. boot up your device and see that you have the balong bug and no reception. (settings -> about phone in the buildnumber it should say balongXXXXX)
7. take the file in the attachement of this post and unzip it
8. put the unzipt directory in the root of your sd/internal memory
9. go to settings->upgrade->menu->lokal update
10.select 'UPDATE.APP'
11.wait for it to start.
12.once it starts the balong should be gone in buildnumber
13. use the updater to update trough b170 if that doesn't work download it here and extract it and set it in a folder named dload on your sd/internal memory (delete the first file first) the do a lacal update to b170.
14 eat a sandwich because this is gonna take some time and by now you should be hungry
15. everything should work now. you should have 2 imei's and receptions.
make sure you got minimal adb installed (normally you do)
if you have location issues you can chance it by following this thread.
Click to expand...
Click to collapse
This worked!! Thank you so much for your help!! I really appreciate it!! :good:
I still have some questions though.
After this process, is my phone dual sim now?? Should I use dual sim version updates from now on???
Why should I have 2 IMEIs now?? It still shows only 1.
grzdom said:
This worked!! Thank you so much for your help!! I really appreciate it!! :good:
I still have some questions though.
After this process, is my phone dual sim now?? Should I use dual sim version updates from now on???
Why should I have 2 IMEIs now?? It still shows only 1.
Click to expand...
Click to collapse
yes it's dual sim...
about the imei's i really don't now.
never had a single sim myself but it could be that you only have one. and yes you should upgrade dual sim software from now
Lordbannakaffalatta said:
yes it's dual sim...
about the imei's i really don't now.
never had a single sim myself but it could be that you only have one. and yes you should upgrade dual sim software from now
Click to expand...
Click to collapse
OK got it!!
Again thank you very much for your help!!
Re-upload
Hi,
please can you re-upload file in step 4 again?
Thanks a lot.
Vymi
grzdom said:
This worked!! Thank you so much for your help!! I really appreciate it!! :good:
I still have some questions though.
After this process, is my phone dual sim now?? Should I use dual sim version updates from now on???
Why should I have 2 IMEIs now?? It still shows only 1.
Click to expand...
Click to collapse
---------- Post added at 04:03 PM ---------- Previous post was at 03:38 PM ----------
Sorry. It was my fall. I got it.
Vymit said:
Hi,
please can you re-upload file in step 4 again?
Thanks a lot.
Vymi
Click to expand...
Click to collapse
You can find everything here
http://forum.xda-developers.com/p8lite/general/mega-thread-root-unbricking-updating-t3400994
Hello if any with time, can test this?
It's the NOUGAT previews released... VNS-L31C900B317SP02-log <--- the actual its 328, but dont problem with use these
First download these .zip files:
DELETED DUE ERROR's...
In Android 6 METICULUS Recovery flash TWO zips... firts de update.zip after without reboot, flash update_full_hw_normal.zip, after that reboot... and post screenshot of settings --> about phone
�In the settings appear update phone?
It's all apps in there? (example, backup app, huawei id, etc...)
�Its all working? and mobile data dont drop after lock screen?
Any error?
I cant test in this moment due need PHONE in this day....
Thanks in advance
update.zip 1,74 GO
update_full_hw_normal.zip 847,22 KO
Download in court, will end in 1 hour
I need flash
It is written version.mbn
BLN-L21C900B104
Start screen
HONOR
Start screen
HONOR
No data available, Wifi works,
Applique betaclub. emui 4.1 bln-b104-log
I'm in a hurry . I have to leave .I return in one hour
I'm in a hurry . I have to leave .
No picture sd card not recognized, no connection pc, sd card direct on pc more recognized ask me to format, i reinstalle b161 see if i reccupere the sd card
Cell works? Call...sms...etc? Please test your apn its correctamente... And please upload picture of about phone (delete imei please)
And... Un settings... Appear DUAL SIM?
Its from honor 9 Lite the firmware (BLN-XX hardware clone from this)
Probé this; flash these firmware and after flash the second zip (data_full_vnsl31....zip) from B328
BadWolfYe said:
Cell works? Call...sms...etc? Please test your apn its correctamente... And please upload picture of about phone (delete imei please)
And... Un settings... Appear DUAL SIM?
Its from honor 9 Lite the firmware (BLN-XX hardware clone from this)
Click to expand...
Click to collapse
no ,cell works
Wifi yes
so,
I did not successfully flash the 2nd file.
TWRP has reboot all by itself, I did not choose them. But it has started, on HONOR logo. The sim card is not detected.
The wifi works.
The appliques of the phone also work, my steps the sim card
BadWolfYe said:
Probé this; flash these firmware and after flash the second zip (data_full_vnsl31....zip) from B328
Click to expand...
Click to collapse
I just retrieve the phone tries this
LoL its Android 6.0 no, Nougat, WTF?
THE MODEM no work on firmware of BLN-**
Interesting... Need more research, tomorrow, more test, for repair phine, back to MM B130 with tutorial un htcmania (if you dont know link, tell me and me send)
BadWolfYe said:
LoL its Android 6.0 no, Nougat, WTF?
THE MODEM no work on firmware of BLN-**
Interesting... Need more research, tomorrow, more test, for repair phine, back to MM B130 with tutorial un htcmania (if you dont know link, tell me and me send)
Click to expand...
Click to collapse
After flashing the first zip TWRP REBOOT alone. I can not flash the 2nd zip
Restore Dload b161 + connects to PC HiSuite restore
---------- Post added at 07:22 PM ---------- Previous post was at 06:43 PM ----------
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1305/g223/v66881/f2/full/update.zip
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1305/g223/v66881/f2/full/changelog.xml
bln-al10c00b328sp10-log
Hello
I need advice,
This is to help a forum member send me an application.
It has vns-l21c185b140, it does not have the bootloader code, it does not have the product ID code http://uupload.ir/view/p5gk_svid_20161217_122104_1.mp4
I am advised tade thing but I no longer think.
It has flash bln for honnor with dload but it can not install anything now any welcome idea
This is for mohammadhosseinzarei1920
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
So i used this guide to root my phone:
youtube. com/watch?v=AMNVruAU6do
at the end it doesnt installed spuerSU and my phone have bootloop.
then i thought maybe factory reset would help. So i did it, and now i cant acces to my phone at all.
any thoughts?
krullol said:
So i used this guide to root my phone:
youtube. com/watch?v=AMNVruAU6do
at the end it doesnt installed spuerSU and my phone have bootloop.
then i thought maybe factory reset would help. So i did it, and now i cant acces to my phone at all.
any thoughts?
Click to expand...
Click to collapse
Ok, need more info,
What model GRA ???
What Build No. ?
What you have tried since?
If the phone was bootlooping how did you access "factory re-set" ?
Have you done ANY searching/reading to help yourself, not least, even my advice in the post below "P8 Stuck at Boot"?
Have you any experience in flashing this phone or even others?
model GRA-l09
Build emui 4.03
so i used SRKToolHuawei 2.0 and it installed TWRP.
then i rooted, and it went into bootloop. So by this program i enterd TWPR again and did factory reset.
and i tried to reload lastest patch but i got "waiting for device", and its not moving from there.
only used kingroot to root another phone. and i tried looking on other forums for solution but nothing helped.
Have you tried downloading an official ROM, say B999, and putting the "update.app" into a folder on SD card named Dload and rebooting while holding all three buttons?
Have you read my advice here? :-
https://forum.xda-developers.com/huawei-p8/help/huawei-p8-l09-bootloop-trying-to-root-t3695022
ohhhh i will try this option, but first need to get another phone so i can put things on sd card ;/
Sparkrite said:
Have you tried downloading an official ROM, say B999, and putting the "update.app" into a folder on SD card named Dload and rebooting while holding all three buttons?
Click to expand...
Click to collapse
huawei p8 firmeware what should i download?
form here?
http://consumer.huawei.com/pl/support/phones/p8/#software_tool
krullol said:
ohhhh i will try this option, but first need to get another phone so i can put things on sd card ;/
Click to expand...
Click to collapse
Why ?
Have you no PC ?
---------- Post added at 07:48 PM ---------- Previous post was at 07:44 PM ----------
krullol said:
huawei p8 firmeware what should i download?
form here?
http://consumer.huawei.com/pl/support/phones/p8/#software_tool
Click to expand...
Click to collapse
Here is B399 :-
http://huaweifirmware.com/huawei-p8/
Sparkrite said:
Why ?
Have you no PC ?
---------- Post added at 07:48 PM ---------- Previous post was at 07:44 PM ----------
Here is B399 :-
http://huaweifirmware.com/huawei-p8/
Click to expand...
Click to collapse
okey it worked and put me into TWRP mode. What i should do next? continue to root?
So i continued to root installed supersu and now my phone is working, but still i dont have root, and i cant find super su app. Anyway thx for help <3
@krullol
If using B399 you MUST use the latest versions of TWRP and SU.
Just follow the instructions in post #1,
https://forum.xda-developers.com/hua...4-0-1-t3431249
TO THE LETTER, using these linked to files (TWRP and SuperSU) and, hey presto, a fully rooted P8.
https://eu.dl.twrp.me/grace/twrp-3.1.1-0-grace.img.html
https://download.chainfire.eu/1220/S...1001224502.zip
PS. Don't forget there is a "Thanks" button.
Hi guys,
After a flashing of boot.img take by Huawei Update Extractor my phone began to boot in a black screen, but with twrp and fastboot enabled.
So I tried to wipe data from twrp, but if I reboot the phone gives me the boot animation of huawei once, after it reboots automatically in twrp.
When I reboot via twrp it says that in my phone there's not an OS working.
Idk if this is a brick or something but if there's a mode to unbrick it i will very happy.
Status of my phone:
Bootloader: Unlocked
Twrp: Yes
Fastboot: Yes
Can Boot?: Only Once, then goes in twrp.
You need to reflash the stock boot image that goes with your current rom version, if it doesn't work you can try doing the dload method
davidhozic said:
You need to reflash the stock boot image that goes with your current rom version, if it doesn't work you can try doing the dload method
Click to expand...
Click to collapse
Where I can find my stock rom? I'm not an expert of modding
Dm me a picture of the box (the area where the model, IME... are) and I'll find it for you..
Also tell me your region so i don't give you the wrong firmware
davidhozic said:
Dm me a picture of the box (the area where the model, IME... are) and I'll find it for you..
Also tell me your region so i don't give you the wrong firmware
Click to expand...
Click to collapse
Ok, I'm Italian my phone is a WAS-LX1A but…
There's a new problem.
I was trying to install a custom rom (lineage 14.1) but it resulted in a hard brick, my phone isn't turning on anymore and no button combinations work.
Have I ripped the phone?
zDerpyII_ said:
Ok, I'm Italian my phone is a WAS-LX1A but…
There's a new problem.
I was trying to install a custom rom (lineage 14.1) but it resulted in a hard brick, my phone isn't turning on anymore and no button combinations work.
Have I ripped the phone?
Click to expand...
Click to collapse
Like it doesn show anything at all?
If you connect it to pc does it get shown(in fastboot)?
davidhozic said:
Like it doesn show anything at all?
If you connect it to pc does it get shown(in fastboot)?
Click to expand...
Click to collapse
So, idk why, I put it in fastboot, and when I plug it to the pc my phone is called fastboot2.0
Now what I have to do?
I was at that stage of hard brick with my p10 lite but then i used dc phoenix to reflash the stock rom and completely unbrick it.. The only problem is it's 15€ (unlimited flashing for 3 days) and i haven't found any free alternatives..
If you buy via PayPal and you are unable to unbrick they will refund you tho.
I'll make a video about it when i get home if you want to wait... From my experience that is the only thing you can do at that stage ( if you are unable to boot into erecovery, screen black)
davidhozic said:
I was at that stage of hard brick with my p10 lite but then i used dc phoenix to reflash the stock rom and completely unbrick it.. The only problem is it's 15€ (unlimited flashing for 3 days) and i haven't found any free alternatives..
If you buy via PayPal and you are unable to unbrick they will refund you tho.
I'll make a video about it when i get home if you want to wait... From my experience that is the only thing you can do at that stage ( if you are unable to boot into erecovery, screen black)
Click to expand...
Click to collapse
I need the stock rom of my huawei P10 Lite
It was Android 7.0 and EMUI 5.1, Model WAS-LX1A, Italy
No stock rom no unbrick
EDIT: But what if I install a custom rom (e.g. Lineage)?
zDerpyII_ said:
I need the stock rom of my huawei P10 Lite
It was Android 7.0 and EMUI 5.1, Model WAS-LX1A, Italy
No stock rom no unbrick
EDIT: But what if I install a custom rom (e.g. Lineage)?
Click to expand...
Click to collapse
If your screen is black and the phone gets detected in fastboot, then you need to flash the stock rom using dx phoenix.
Custom ROMs can't be installed via it and even if they couod be, you need the stock because custom ROMs don't contain the right files for an unbrick
davidhozic said:
If your screen is black and the phone gets detected in fastboot, then you need to flash the stock rom using dx phoenix.
Custom ROMs can't be installed via it and even if they couod be, you need the stock because custom ROMs don't contain the right files for an unbrick
Click to expand...
Click to collapse
Ok, where I can find a stock rom?
My model and region are in one of my replies
zDerpyII_ said:
Ok, where I can find a stock rom?
My model and region are in one of my replies
Click to expand...
Click to collapse
Search for Was-LX1AC432B206 on firmware finder
davidhozic said:
Search for Was-LX1AC432B206 on firmware finder
Click to expand...
Click to collapse
Now what I have to do? I never used DC Pheonix… if someone can use it please pm me.
zDerpyII_ said:
Now what I have to do? I never used DC Pheonix… if someone can use it please pm me.
Click to expand...
Click to collapse
They have their forums btw...
What you need to do is connect your phone to the pc while on bootloader, select the update.app file from the main firmware zip, and also get the customization .app from the "hw Europe" or sth like that zip file (if you have one) and then just let it flash.
---------- Post added at 12:23 PM ---------- Previous post was at 12:21 PM ----------
Btw, if you did what i did a while back and played with oeminfo, you can grab someones c432 twrp backup of it, extract it and create a custom flash script.. I did this a while back so I can't give you exact instructions yet..
When I'll get home I'll do some research and make a video flashing my bricked p10 lite with dc Phoenix
davidhozic said:
They have their forums btw...
What you need to do is connect your phone to the pc while on bootloader, select the update.app file from the main firmware zip, and also get the customization .app from the "hw Europe" or sth like that zip file (if you have one) and then just let it flash.
---------- Post added at 12:23 PM ---------- Previous post was at 12:21 PM ----------
Btw, if you did what i did a while back and played with oeminfo, you can grab someones c432 twrp backup of it, extract it and create a custom flash script.. I did this a while back so I can't give you exact instructions yet..
When I'll get home I'll do some research and make a video flashing my bricked p10 lite with dc Phoenix
Click to expand...
Click to collapse
Ok Thanks! Now all I need is hope...
Only one (maybe) last question, if i try to unbrick my phone but after the unbrick is still bricked, how do I get a refund?
zDerpyII_ said:
Now what I have to do? I never used DC Pheonix… if someone can use it please pm me.
Click to expand...
Click to collapse
zDerpyII_ said:
Ok Thanks! Now all I need is hope...
Only one (maybe) last question, if i try to unbrick my phone but after the unbrick is still bricked, how do I get a refund?
Click to expand...
Click to collapse
You ask for it at the forums, just make sure you buy with PayPal, not sure for the credit cards
davidhozic said:
You ask for it at the forums, just make sure you buy with PayPal, not sure for the credit cards
Click to expand...
Click to collapse
Ok thanks, maybe i'll unbrick the phone :fingers-crossed:
zDerpyII_ said:
Ok thanks, maybe i'll unbrick the phone :fingers-crossed:
Click to expand...
Click to collapse
If you don't unbrick it, ask for the money back at the forums do NOT use PayPal's charge back tool
---------- Post added at 08:40 AM ---------- Previous post was at 08:37 AM ----------
zDerpyII_ said:
Ok thanks, maybe i'll unbrick the phone :fingers-crossed:
Click to expand...
Click to collapse
And you have 3 days to get the phone unbricked so i recommend trying multiple firmwares if one doesn't work