Help with bricked N4 - Nexus 4 Q&A, Help & Troubleshooting

2 days ago my N4 freezed, so I decided to reboot it. But after turning off it stoped showing any signs of work. No reaction on Turn on button and connecting it to the wall charger. If I connect the phone to the PC it appears in device manager as unknown qhusb_dload device. I found solution on YouTube, It says: hold Vol Down and Turn On buttons while phone connected to the wall charger and led should start blinking, but in my case It only blink once and nothing happens. Any help?

razer25 said:
2 days ago my N4 freezed, so I decided to reboot it. But after turning off it stoped showing any signs of work. No reaction on Turn on button and connecting it to the wall charger. If I connect the phone to the PC it appears in device manager as unknown qhusb_dload device. I found solution on YouTube, It says: hold Vol Down and Turn On buttons while phone connected to the wall charger and led should start blinking, but in my case It only blink once and nothing happens. Any help?
Click to expand...
Click to collapse
Doesn't look like a bricked device.
Change the charger and the cable as well and leave it charging for a while.
Sent from my Nexus 5X using Tapatalk

hamedunix said:
Doesn't look like a bricked device.
Change the charger and the cable as well and leave it charging for a while.
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
Tried with 2 chargers and 2 different batteries.

Related

[Q] HELP!!!! n10 died and now wont turn on

Ok my n10 is rooted and romed with CARBON rom, no problems nothing, but today I had an email come in I looked at it set It down left the screen on a second later it just died. so I plugged it in back on it comes. later same thing almost dead checked new email, set it down screen on then death.....plugged it in again, now nothing except a flashing battery charging symbol. been charging for 10 min. tried power, power volume down, nothing....got a different cable...nothing.....my computer wont pick it up either. what do I do?????
PLEASE HELP!!!
I just had this same problem with mine; because of the strange battery issue where my battery would read 90% when it was actually empty and slow charging once it was plugged in... The resolution for me was to plug it into the charger for 5 minutes and not touch it and then try a power on.
bigdogjt said:
I just had this same problem with mine; because of the strange battery issue where my battery would read 90% when it was actually empty and slow charging once it was plugged in... The resolution for me was to plug it into the charger for 5 minutes and not touch it and then try a power on.
Click to expand...
Click to collapse
Thanks Ill give it a go!!
Plug it in to the wall charger, not a computer. Let it sit for 30 minutes and then hold all buttons down at the same time. This should let the tablet boot now and will bring you into fastboot mode. It defaults to "Start" so just hit the power button and the tablet will boot like normal. Once you verify the tablet will boot fine, shut it down and leave it plugged into the wall charger until the tablet is charged all the way.
Dont know if it is a coincidence or not but this is the 3rd time I have heard the same story and all people were using the Carbon ROM.
Thanks guys for the feedback, definitely will be switching roms and buy the pogo charger!
Sent from my Nexus 10 using xda app-developers app

Nexus 4 Died Fix

Hi,
I need help:
my nexus 4 was in charging overnight, hen i came up this morning, he was still fully functional.
aftr an hour, i came to use it again, it i saw that it was dead.
i have tried the fixes for the problem (to hold vol down and power byttons, an after 15 seconds to insert Cable and all this stuff, didn't worked).
i dont know what else to do!
im freaking out!
thanks for help
Can you turn your device on? If you plug in the charging cable, did it charge? And what about bootloader mode?
CCody said:
Can you turn your device on? If you plug in the charging cable, did it charge? And what about bootloader mode?
Click to expand...
Click to collapse
Nothing :/
the device wont turn on, the device wont charge (i have tried different socket/desktops, and also different chargers), and i cant boot into bootloader / recovey mode.
Note: when i performed the steps on the internet, when i plugged in the cable, the Red LED light in turning on for about 15-20 seconds, and then turning off.
what can i do except for going to a lab?
xph11 said:
Nothing :/
the device wont turn on, the device wont charge (i have tried different socket/desktops, and also different chargers), and i cant boot into bootloader / recovey mode.
Note: when i performed the steps on the internet, when i plugged in the cable, the Red LED light in turning on for about 15-20 seconds, and then turning off.
what can i do except for going to a lab?
Click to expand...
Click to collapse
You can try this, if you didn't have already:
- Plug your phone to the charger while holding down the volume down button. Your device should boot into bootloader mode.
- If the above doesn't work, then let your phone charge for half an hour and try it again.
CCody said:
You can try this, if you didn't have already:
- Plug your phone to the charger while holding down the volume down button. Your device should boot into bootloader mode.
- If the above doesn't work, then let your phone charge for half an hour and try it again.
Click to expand...
Click to collapse
i have tried it and it didn't worked.
i will try in half and hour again like you said. (but i dont think that the phone is charging at all)
also, when i tried you steps, the Red LED blinked a few times when i inserted the cable in, and then its turned off.
xph11 said:
i have tried it and it didn't worked.
i will try in half and hour again like you said. (but i dont think that the phone is charging at all)
also, when i tried you steps, the Red LED blinked a few times when i inserted the cable in, and then its turned off.
Click to expand...
Click to collapse
When you plug the cable in, you must press down the volume down button simultaneously. Not just only plug the cable in.
CCody said:
When you plug the cable in, you must press down the volume down button simultaneously. Not just only plug the cable in.
Click to expand...
Click to collapse
i know that what i did.
i pressed and hold the volume down + power buttons, and while holding them, i inserted the cable.
xph11 said:
i know that what i did.
i pressed and hold the volume down + power buttons, and while holding them, i inserted the cable.
Click to expand...
Click to collapse
Alright :good:
CCody said:
Alright :good:
Click to expand...
Click to collapse
ok, i tried again now, and the Red LED is now on, and its not turning off.
its mean that the device is charging now?
im not touching it, im afraid to mess up something hahaha
xph11 said:
ok, i tried again now, and the Red LED is now on, and its not turning off.
its mean that the device is charging now?
im not touching it, im afraid to mess up something hahaha
Click to expand...
Click to collapse
Is the LED always on or only when you plug in the charging cable. I may have a slightly presumption...
CCody said:
Is the LED always on or only when you plug in the charging cable. I may have a slightly presumption...
Click to expand...
Click to collapse
since the LED truned on i didn't disconnected the cable from the device, and the LED didn't turned off.
i dont know if to remove the cable right now, because if it is finally charging, i dont want to stop it and mess it up again.
so what now?
edit: i didn't disconnected the cable yet. but the Red LED turned off.
xph11 said:
since the LED truned on i didn't disconnected the cable from the device, and the LED didn't turned off.
i dont know if to remove the cable right now, because if it is finally charging, i dont want to stop it and mess it up again.
so what now?
Click to expand...
Click to collapse
You are charging from the electrical outlet, are you?
Just let it charge for at least two hours, it is a good sign that the LED went on.
Furthermore this red LED also known as 'red light of death' is a common issue of Nexus devices. It's an indicator for the batterie not to charge or because there was a thermal shutdown cause by too much heat and you only can solve this by screw off your device.
I hope you dont must go this far. Just be patient and wait what happens after the charging period.
CCody said:
You are charging from the electrical outlet, are you?
Just let it charge for at least two hours, it is a good sign that the LED went on.
Furthermore this red LED also known as 'red light of death' is a common issue of Nexus devices. It's an indicator for the batterie not to charge or because there was a thermal shutdown cause by too much heat and you only can solve this by screw off your device.
I hope you dont must go this far. Just be patient and wait what happens after the charging period.
Click to expand...
Click to collapse
did you saw my edit?
xph11 said:
did you saw my edit?
Click to expand...
Click to collapse
Ya, I did. As I said, be patient, let it charge.
CCody said:
Ya, I did. As I said, be patient, let it charge.
Click to expand...
Click to collapse
i have just noticed that the phonr is not charging at all.
its like before the Red LED turned on for a few minutes..
Did you also try to charge it with another cable? Try again to press down volume down key and plug in the cable.
By 'not charging at all' do you mean, there isnt this batterie logo when charging?
Edit: Try this volume-down-plug-in-cable a couple of time. It may not work the first time you do it.
CCody said:
Did you also try to charge it with another cable? Try again to press down volume down key and plug in the cable.
By 'not charging at all' do you mean, there isnt this batterie logo when charging?
Edit: Try this volume-down-plug-in-cable a couple of time. It may not work the first time you do it.
Click to expand...
Click to collapse
tried, not working.
when the phone i connected to charger, there is no LED light or somethinh on the screen.
xph11 said:
tried, not working.
when the phone i connected to charger, there is no LED light or somethinh on the screen.
Click to expand...
Click to collapse
I am sorry. I don't know what to do else. You may send your device to LG or Google...
Thank you anyway
Anyone else knows what to do???
xph11 said:
Thank you anyway
Anyone else knows what to do???
Click to expand...
Click to collapse
search "red light of death".
leaving it on the charger might fix it. taking off the back cover, disconnecting the battery, then reconnecting the battery is an almost 100% fix.

[Q] N4 doesnt turn on. Red Light blinks once.

Hello.
When I try to turn on my N4, I hold power button, and after about 10 seconds Red light blinks (just once, if it's connected to USB that 1 blink last for 3 seconds, if connected to wall, it's just quick 1 blink. If it not connected anywhere there is no action at all, it just stays dead, no blinks, nothing). Same if I try to go in bootloader by holding volume down+power.
This happened after I successfully installed CM12, with no errors. Then I rebooted my phone, and it just stayed black as it is now. Battery was around 25~30% that time, and phone was connected to USB.
Did I bricked my phone totally? I am now trying to charge it up already for 1 hour... but it nothing changes.
I have searched here for similar problems, but couldn't find solution...
Edit: Charging already for 10h+ , still same..
Edit2: I removed battery, reconnected after a while, still same problem.
So I tested it with multimeter, it says 2.6V, but fully charged must be 3.8V. Could this be a problem? I was charging it for whole night.
Edit3: I just got new battery . But it looks the same.. phone doesn't boot up.. same red light blinks once.. so.. its my phone is dead? I can't believe that...
When I connect to PC usb, there are unrecognized deviced called "QHSUSB_DLOAD".
easy fix
Hold down the power button and the volume down button at the same time until phone reboots. If you see the little android no need to worry just let go and wait for your device to reboot on its own. This is not a factory reset it's just like restarting your device. :good:
zelexon said:
Hold down the power button and the volume down button at the same time until phone reboots. If you see the little android no need to worry just let go and wait for your device to reboot on its own. This is not a factory reset it's just like restarting your device. :good:
Click to expand...
Click to collapse
I have tried that many times. Nothing. It's bootloader screen, but I can't get there. Nothing happens. If I keep holding volume down+power it just keep blinking once every ~10 seconds, same if I hold just power button. If phone is not connected to charger, there are no blinks at all.
I removed battery, reconnected after a while, still same problem.
So I tested it with multimeter, it says 2.6V, but fully charged must be 3.8V. Could this be a problem? I was charging it for whole night.
Cracken6 said:
I removed battery, reconnected after a while, still same problem.
So I tested it with multimeter, it says 2.6V, but fully charged must be 3.8V. Could this be a problem? I was charging it for whole night.
Click to expand...
Click to collapse
I had the same problem a year ago, I tried to remove the battery, charging all night, and other solutions that I found online and no one worked.
Finally I found here in XDA a user with the same problem and his solution was charger the phone with a wireless charger, a friend of mine has one and I put the phone to charge and after a few minutes the screen goes on and the phone was charged, then I press power button and the nexus run again.
Hope this works.
Sorry for my bad English, I'm from Spain.
Good luck.
(I bought a wireless charger in case it happen again)
I don't know anyone with wireless charger. I already ordered a new battery, and then I probably will get wireless charger also. Ty.
But this problem is very weird if you think so.. I think it happened because of many aspects together:
1) Battery was already below 30%
2) I pretty regularly charge phone with USB (won't do it again)
3) It was connected to PC USB in same time.
4) I installed CM12 ROM in same time
So main reason I think is USB, that I restarted phone while it was on pretty low battery and with USB connected.. phone restarted and got invalid voltages and couldn't even boot up or charge phone. I also found an article which says, minimum voltage, when phone battery has 0%, it's 3.0V, so I was below that.. it just screwed everything and battery died. Well, I am not sure for 100% that it's battery fault, but I hope so, I really love my N4 and still wanna use it for long time, I hope it's not dead phone, just a dead battery. Lets see! I will update this thread , when I get my new battery (less than month probably).
Sorry, my english is also not perfect. I am from Latvia.
I was playing when it happened to me. The phone was very very hot and the battery was around 70%. When I put in the wireless charged and I can reboot the phone the battery was at 65%, so it had charge but the phone won't boot.
I charge my phone almost every day, sometimes with AC, others with USB (plugging to PC) or wireless that depends of my needs
I hope you can fix it. Good luck.
Btw. Do you know if battery charges with wireless charger, if it's removed from the phone?
Don't think it does, since the receiving coils for wireless charging are located just behind the glass back.
Flipz77 said:
Don't think it does, since the receiving coils for wireless charging are located just behind the glass back.
Click to expand...
Click to collapse
The battery will charge with a NCF Charger
Major Issue Google
This "Nexus SOD" issue is showing up on many sites across the Internet. I have multiple "Nexus" devices including 2 Nexus 4, 1 Nexus 5, 2 "Nexus 7 2013". It suddenly started out of the blue with one of my Nexus 4 phones. Symptoms included rapid battery discharge. I am using Lollipop 5.1 on all devices. There are many claims as to the cause, Hardware Motherboard, Power Button etc. Others claim it is "Software Related" or App Related. The problem effects Nexus 4 and Nexus 5 phones. I have ordered a new motherboard for my nexus 4 device and see if that makes a difference.
This problem should warrant a "Major Android Lollipop Crisis Team" by Google to investigate the cause and let us know what it is and what Google is doing to solve the problem before moving to announce "Android M". This issue needs to brought up and actively pursued at the upcoming "Google I/O Conference" by the strong Android Developers Groups to press for "Formal Action"
charging method
Cracken6 said:
I have tried that many times. Nothing. It's bootloader screen, but I can't get there. Nothing happens. If I keep holding volume down+power it just keep blinking once every ~10 seconds, same if I hold just power button. If phone is not connected to charger, there are no blinks at all.
Click to expand...
Click to collapse
I had this problem a long time ago and my fix worked for me after doing a little research it seems like this is a case called battery total discharge. The fix was simply to charge your phone using the wall adapter that came with your phone (I still use my old apple cube wall thing) and to wait for the red light to appear then wait about ten minutes before trying to reboot.
I just got new battery . But it looks the same.. phone doesn't boot up.. same red light blinks once.. so.. its my phone is dead? I can't believe that...
When I connect to PC usb, there are unrecognized deviced called "QHSUSB_DLOAD".
Maybe this video will help you: Oh I´m not allowed to post links until now.
Just search for: - Nexus 4 "red light of death" fix - at youtube.
Hope it will help
AndRe5575 said:
Maybe this video will help you: Oh I´m not allowed to post links until now.
Just search for: - Nexus 4 "red light of death" fix - at youtube.
Hope it will help
Click to expand...
Click to collapse
I have checked all kind of videos there. Also that one. Most of these cases are related to battery, but it seems in my case it isn't. I just searched for QHSUSB_DLOAD unrecognized device, all posts says it means phone is bricked... But cmon, how? I installed CM12, successfully, without any errors, then just restarted phone, and its dead...
Cracken6 said:
I have checked all kind of videos there. Also that one. Most of these cases are related to battery, but it seems in my case it isn't. I just searched for QHSUSB_DLOAD unrecognized device, all posts says it means phone is bricked... But cmon, how? I installed CM12, successfully, without any errors, then just restarted phone, and its dead...
Click to expand...
Click to collapse
Did u try booting the phone without battery by connecting to wall charger and what about flashing stock ROM via PC
Also check that the power button works
This case should be solved
as9333 said:
Did u try booting the phone without battery by connecting to wall charger and what about flashing stock ROM via PC
Also check that the power button works
This case should be solved
Click to expand...
Click to collapse
Just tried booting without battery, and connecting to wall. Same - red light blinks once, after I hold Power button or Power+Volume down for about 15 seconds. If I keep buttons pressed, it just repeats every ~15 seconds.
Power buttons works fine.
After I checked that Device manager thing in google.. it looks very bad.. phone is dead.. probably need to change motherboard. I am just shocked, how this could happen... I didn't receive any errors during CM12 installation. Phone just instantly died after restart.

No power, red LED blinks now and again, otherwise nothing

Recently I noticed that my S8 was not fast charging when plugged into the wall outlet, but it was still at least charging albeit slowly. Yesterday the battery was down to 15%, I used a car charger on the way home, not really paying much attention to the battery percentage, but then when home used it for a couple minutes before plugging it onto the wall charger.
At that time I noticed it had shut off, figuring the battery was simply flat I left it for the night.
This morning I get up and it is unresponsive, if I push any buttons the LED will blink red a couple times then do nothing. I have tried to reset holding the power button and volume down and just get the same red LED blinking. Tried plugging it into a laptop charger, and still nothing.
Any suggestions before I send the thing back? Any way to access the pictures, contacts etc?
Thanks.
naiku said:
Recently I noticed that my S8 was not fast charging when plugged into the wall outlet, but it was still at least charging albeit slowly. Yesterday the battery was down to 15%, I used a car charger on the way home, not really paying much attention to the battery percentage, but then when home used it for a couple minutes before plugging it onto the wall charger.
At that time I noticed it had shut off, figuring the battery was simply flat I left it for the night.
This morning I get up and it is unresponsive, if I push any buttons the LED will blink red a couple times then do nothing. I have tried to reset holding the power button and volume down and just get the same red LED blinking. Tried plugging it into a laptop charger, and still nothing.
Any suggestions before I send the thing back? Any way to access the pictures, contacts etc?
Thanks.
Click to expand...
Click to collapse
Laptop and car chargers are usually slow. Do get a new home charger with cable and even change the socket which you use to plug the charger in.
Sent from my SM-G955F using Tapatalk
I have a smilar problem.
100% battery, charged overnight, at 9:00 the phone was working, at 9:45 it wasn't working... I had a green led blinking but no response from any key or combination. When I unplugged it the green blinking stopped but the phone doesn't respond. It doesn't automatically connect to wifi (I've restarted the router to see if it connects)
I'm proceeding to get a refund because mine is 5 days old (16/08/2017)
thahim said:
Laptop and car chargers are usually slow. Do get a new home charger with cable and even change the socket which you use to plug the charger in.
Click to expand...
Click to collapse
I know they are slow, but figure maybe the laptop can get it to at least power on. I have tried a different socked to plug the charger in, not going to go and buy a new home charger and cable though if the phone is unresponsive.
XoRDy said:
I have a smilar problem.
100% battery, charged overnight, at 9:00 the phone was working, at 9:45 it wasn't working... I had a green led blinking but no response from any key or combination. When I unplugged it the green blinking stopped but the phone doesn't respond. It doesn't automatically connect to wifi (I've restarted the router to see if it connects)
I'm proceeding to get a refund because mine is 5 days old (16/08/2017)
Click to expand...
Click to collapse
If I can get this to power on I am getting all my pictures, contacts and then dumping it. At the moment nothing gets it to power on, just a blinking red LED. It is barely 2 months old.
Edit: Looks like it will be a warranty replacement, the red light is blinking regardless of any type of charger I hook it up to. Any combination of trying to get it to reboot either normally or into recovery fails. My laptop recognizes something is plugged in, but that is as far as it goes. Hopefully I can get contacts off it at the very least, I also hate to turn in a phone without resetting it.

Phone won't turn on, no charging indicator

Hey All,
I have bought a used leeco pro 3 off swappa. Unfortunately I didn't get the phone until much later after delivery (had to have someone bring it to me). In photos the phone works fine, but when I got it it won't turn on and there's no indicator that it's charging at all. When I do plug it in, the phone does get warm though.
Any thoughts what the problem could be?
Have you tried another USB-C cable? Apparently the stock OEM one sucks.
sk8223 said:
Have you tried another USB-C cable? Apparently the stock OEM one sucks.
Click to expand...
Click to collapse
I have another leeco and I tried that charger still nothing. I've been reading and wondering if the battery drained. I'm going to leave it plugged in for awhile to see if anything changes. I plugged it directly into my laptop and it made that noise that it recognized something was plugged in but it didn't turn on or anything like that.
phillytemptation said:
I have another leeco and I tried that charger still nothing. I've been reading and wondering if the battery drained. I'm going to leave it plugged in for awhile to see if anything changes. I plugged it directly into my laptop and it made that noise that it recognized something was plugged in but it didn't turn on or anything like that.
Click to expand...
Click to collapse
You should to try this, hold the power button more than 1 min, or hold Volume down+power until display show up then hold the power again util it reboot.
hearnfar said:
You should to try this, hold the power button more than 1 min, or hold Volume down+power until display show up then hold the power again util it reboot.
Click to expand...
Click to collapse
Tried both, still nothing.
phillytemptation said:
Tried both, still nothing.
Click to expand...
Click to collapse
Press power button 2 minutes or longer, sometime the phone will come alive I did it couple of times before.
If not work try this tread:
https://forum.xda-developers.com/le-max-2/how-to/guide-hard-brick-fix-qualcomm-hs-usb-t3492949
Plug in charger know hold down power and volume push it down a hold for 15 seconds you may need to repeat this.
Sent from my LEX720 using xda premium
Moon75 said:
Press power button 2 minutes or longer, sometime the phone will come alive I did it couple of times before.
If not work try this tread:
https://forum.xda-developers.com/le-max-2/how-to/guide-hard-brick-fix-qualcomm-hs-usb-t3492949
Click to expand...
Click to collapse
Hmm any ideas on what files I would need for the leeco pro 3? It indeed shows up as Qualcoom HS loader on my computer.
mchlbenner said:
Plug in charger know hold down power and volume push it down a hold for 15 seconds you may need to repeat this.
Sent from my LEX720 using xda premium
Click to expand...
Click to collapse
I'll keep trying but doesn't want to turn on. Interestingly though, when it's plugged into my laptop at least I can hear the phone being disconnected via USB when I hold the power button down. It just doesn't seem to boot up.
When you plug it does it show it charging.
You must push power and volume button at the same time.
Never buy from them.
Sent from my LEX727 using xda premium
phillytemptation said:
Hmm any ideas on what files I would need for the leeco pro 3? It indeed shows up as Qualcoom HS loader on my computer.
I'll keep trying but doesn't want to turn on. Interestingly though, when it's plugged into my laptop at least I can hear the phone being disconnected via USB when I hold the power button down. It just doesn't seem to boot up.
Click to expand...
Click to collapse
Try use different cable connect phone to computer. For the phone show as Qualcoom HS loader on pc, I just can remember did not format it or anything like that and the phone was fine working again.
I'm having a similar problem, I bought a new leeco pro 3 charger today, original, plugged it in charged until led was green. An hour later noticed fingerprint scanner not working, so i discovered the phone is off, now I can't turn on. I had AICP ROM, the latest one from 21 january.
same problem,dead
i have the same problem i just press the power button with level down(-) audio more than 2 minutes and it boot up. try to press it more than two minutes
rudolph323 said:
I'm having a similar problem, I bought a new leeco pro 3 charger today, original, plugged it in charged until led was green. An hour later noticed fingerprint scanner not working, so i discovered the phone is off, now I can't turn on. I had AICP ROM, the latest one from 21 january.
Click to expand...
Click to collapse
Did you get this working?
mchlbenner said:
Did you get this working?
Click to expand...
Click to collapse
This doesn't happen anymore, it seems. I charged to 100% a week ago (with leeco QC 3 charger) and it didn't turn off.
rudolph323 said:
This doesn't happen anymore, it seems. I charged to 100% a week ago (with leeco QC 3 charger) and it didn't turn off.
Click to expand...
Click to collapse
It actually happened just now. I charged from 38% to 95% I disconnected non-QC charger and went into AccuBattery app looked at the stats and the phone just shut down... Now I can't turn it on. Nothing happens.
I was on the latest AICP ROM
EDIT: I hold down the power button and connected the phone to PC, it turned on to LEECO screen and now red LED is blinking.
rudolph323 said:
It actually happened just now. I charged from 38% to 95% I disconnected non-QC charger and went into AccuBattery app looked at the stats and the phone just shut down... Now I can't turn it on. Nothing happens.
I was on the latest AICP ROM
EDIT: I hold down the power button and connected the phone to PC, it turned on to LEECO screen and now red LED is blinking.
Click to expand...
Click to collapse
Try holding volume up see if you have fastboot.
Sent from my LEX727 using xda premium
Any help?
Hello, I have very similar problem. My Leeco le pro 3 don't charge I try diffrend cables and chargers but when plug-in only orange diode start to blink. Do you have any other ideas what to try?
same problem here. LeEco shut down because of low battery. After plugging the charger in it, the LED only blinks red. Then it vibrates, turns off and starting into the charging mode without charging. Starting TWRP or dotOS is not possible because it shuts down.
nocturnoz said:
same problem here. LeEco shut down because of low battery. After plugging the charger in it, the LED only blinks red. Then it vibrates, turns off and starting into the charging mode without charging. Starting TWRP or dotOS is not possible because it shuts down.
Click to expand...
Click to collapse
Mine is installed the same rom, and today It had the same problem.
mmcarvaxd said:
Mine is installed the same rom, and today It had the same problem.
Click to expand...
Click to collapse
Problem is "solved". I was able to boot inti TWRP and charged from zero to 10%. After that after few trys it was possible to boot into the ROM to charge the battery to 100%.

Categories

Resources