Related
I tried to root my phone S7 Edge 6.1.1 just a moment ago using ODIN and CF Auto Root. I got the PASSES! sign in ODIN but upon phone rebooting I am stuck on the Samsung S7 Edge logo screen with text in red 'Recovery Is Not Seandroid Enforcing" up the top.
At this time I am unable to turn my phone off, when I do it just turns back on and goes to the same screen. I can't get into download or recovery mode either.
Any help on how to fix would by greatly appreciated.
Thanks in advance.
Also thought I should add, my phone doesn't get registered when I connect it to my PC either, it wont show up in ODIN so I am unable to flash a stock recovery at this time.
It's trying to boot into recovery.
When you say you rooted with CF Auto Root, what did you do precisely? And did you follow Chainfire's specific instructions regarding the lack of screen output during the process?
Beefheart said:
It's trying to boot into recovery.
When you say you rooted with CF Auto Root, what did you do precisely? And did you follow Chainfire's specific instructions regarding the lack of screen output during the process?
Click to expand...
Click to collapse
Thanks for the reply.
I used CF-Auto-Root-zerolte-zeroltexx-smg925f.tar to root.
The steps I used was to simply put my phone into download mode and use ODIN to flash the file mentioned above. That is as far as I got unfortunately. I did this once before, a few month back when I first got the phone with no issues. I remember having to install TWRP but I couldn't remember if I did that pre-root or post-root. But I think that is where I went wrong.
Now I am unable to do anything with my phone. I can't turn it off, get into download or recovery mode. When I hold down VOL UP+POWER+HOME it just resets the phone back to the samsung logo screen.
Any ideas on what I could do?
You used the CF Auto Root file for an S6 Edge.
Beefheart said:
You used the CF Auto Root file for an S6 Edge.
Click to expand...
Click to collapse
OH GOD. You're right. I just realized that. I was supposed to have them saved into their own folders but I guess I saved that one too the wrong folder.
So what does that mean for the life of my phone then? Is it toast or is it recoverable somehow?
What is your model? Is it the SM-G935F? If so, first things first, download the correct CF Auto Root file for your device (here) and try again. Press VOL DOWN+POWER+HOME and it should reboot into Download Mode. Then try to flash the correct file in Odin again.
These phones are very difficult to hard brick, especially with something like CF Auto Root so you should be ok.
Beefheart said:
What is your model? Is it the SM-G935F? If so, first things first, download the correct CF Auto Root file for your device (here) and try again. Press VOL DOWN+POWER+HOME and it should reboot into Download Mode. Then try to flash the correct file in Odin again.
These phones are very difficult to hard brick, especially with something like CF Auto Root so you should be ok.
Click to expand...
Click to collapse
Thanks.
Yes, it is a SM-G935F. Unfortunately I am unable to reboot the phone into Download Mode. When pressing VOL DOWN+POWER+HOME it just takes me straight back to the Samsung logo where it says "Recovery Is Not Seandroid Enforcing". I'm hoping that once the battery drains completely I will be able to boot into Download Mode again.
Try simply resetting it instead. Press volume down and the power key (don't press home) for around 7-10 seconds. Once it starts to reset, remove your fingers from the buttons very briefly then press volume down, home and power to enter download mode.
Beefheart said:
Try simply resetting it instead. Press volume down and the power key (don't press home) for around 7-10 seconds. Once it starts to reset, remove your fingers from the buttons very briefly then press volume down, home and power to enter download mode.
Click to expand...
Click to collapse
That hasn't worked either unfortunately.
I just found this thread from a guy having a similar problem. He just had to wait for his phone's battery to drain completely and then he was able to enter download mode again.
You shouldn't have to though. If you can get the phone to reset at all (even if it's to make another attempt to go into recovery) then providing you time it right, you should be able to get into download mode. Did keeping your fingers on just the volume down and power buttons do anything? Keep them on continuously for up to 20 seconds and see what happens. Did you say pressing vol up & home & power made it reset and try to again get into recovery? What happens if, as soon as the screen indicated it's resetting, you remove your fingers and quickly press vol down & home & power instead?
Anyway, even if you have to wait until the phone dies, getting into download will be possible eventually. Then worst case scenario would be you having to reflash stock back. Or, as would be my preference, flash TWRP then flash a custom rom zip like Superman.
Just to confirm, I take it you selected OEM Unlock in dev options?
Beefheart said:
You shouldn't have to though. If you can get the phone to reset at all (even if it's to make another attempt to go into recovery) then providing you time it right, you should be able to get into download mode. Did keeping your fingers on just the volume down and power buttons do anything? Keep them on continuously for up to 20 seconds and see what happens. Did you say pressing vol up & home & power made it reset and try to again get into recovery? What happens if, as soon as the screen indicated it's resetting, you remove your fingers and quickly press vol down & home & power instead?
Anyway, even if you have to wait until the phone dies, getting into download will be possible eventually. Then worst case scenario would be you having to reflash stock back. Or, as would be my preference, flash TWRP then flash a custom rom zip like Superman.
Just to confirm, I take it you selected OEM Unlock in dev options?
Click to expand...
Click to collapse
I have never had any trouble getting into recovery or download before so I know the method. But just the properly clarify for you I will explain some of the combination I have tried without success. Bare in mind the phone is constantly turned on and idles on the Samsung logo.
I have tried:
Hold VOL DOWN+POWER+HOME, the phone resets and goes back to the logo.
Hold VOL DOWN+POWER, same as above.
Hold VOL UP+POWER+HOME, nothing happens at all.
Hold VOL UP+POWER, same as above.
Hold VOL DOWN+POWER+HOME, release and repress all on black screen, just goes back to logo.
Hold VOL DOWN+POWER, release and hold VOL DOWN+POWER+HOME on black screen, just goes back to logo.
and numerous other things like random combination to try and enter Download or Recovery mode, which have all failed.
Right now it's just stuck on the Samsung logo and staying there, taking forever to drain battery. I work in the morning so hopefully it is dead by then and I can get into Download mode.
Have already started download stock firmware in hopes that I will be able to flash it after.
Thanks a bunch for your help. If you think of anything else I might be able to try let me know!
Oh wow. 100+ attempts and I followed your last post about holding for up to 20 seconds. I was waiting ~5 seconds and releasing thinking that it hadn't worked.
Finally go into Download mode and will flash stock firmware and let you know how I go.
Thanks again! I owe you a cold one.
EDIT: Was no need to flash stock firmware. Just flashed the proper version of CF Auto Root and it worked. Again, thank you so much!
Fantastic. Hope you get it sorted.
On a side note, you have probably already tripped knox and you will have lost you OS data and possibly even what you have stored on internal storage. If so, I suggest you install TWRP, format data (you will lose everything with this but it removed encryption) and install a custom rom like Superman 1.9 from your external SD. It's better than plain stock and comes pre-rooted with plenty of other mods.
I can't get it to work? What keys did you held down?
This is how my screen looks
cs5-2.4pda.to/7951347.jpg (copy this link in browser)
I tried to root with Odin but I think I might have failed. How can I undo this?
recovery is not seandroid enforcing
hello,
my S7 Edge was rooted with cf-auto-root and worked fine but after 2 monthe I've installed LBE_Security_Rel_6.1.1928_A1_DE_v5_signed and reconized the message device is not tooted.
I was not very clever and cofirmed the question "fix the root problem" I don't remember exactly the words. After that root was gone.
I've flashed the stock Fw G935FXXU1APD1_G935FDRE1APC3_DRE but I still have the message "recovery is not seandroid enforcing" after trying to root with CF auto root.
AP:G935FXXU1APD1
CP:G935FXXU1APD1
CSC:G935FDRE1APC3
Is there any way to get root again
Any help on how to fix would by greatly appreciated.
Thanks in advance.
doodlemeat said:
I can't get it to work? What keys did you held down?
This is how my screen looks
cs5-2.4pda.to/7951347.jpg (copy this link in browser)
I tried to root with Odin but I think I might have failed. How can I undo this?
Click to expand...
Click to collapse
Simply hold down Home + Power + Volume Down for 10-15 seconds - don't release when the phone initially reboots and gives the same error, keep them held down and download mode will appear. I have to hold for 11 seconds, a strangely unrounded number.
Hello Guys I have this Same issue Yesterday....... This happens when you flash outdated CF Autoroot. CF Autoroot Updated on 25/08/2016... Download it...
Fix for Stuck in Logo Screen
Just Click and Hold ...... Vol Down + Menu + Power Keys ...... DO NOT RELEASE. IT Will Restart. DONT release. It will restart again and you will be download mode.
i found this during the rooting process. its a bit different to older samsungs on the s7 / s7edge. YOU HAVE TO KEEP HOLD OF VOL DOWN + HOME + POWER until it enters download mode, which can be 20-25 seconds
hello
i'm new here at the forum.
i have a problem with the superman rom
i rooted my phone i installed the rom but now my phone is already 30 minutes on a red screen ( from the superman rom i think )
i cant go anymore to the recovery by using volume up home and power buttom.
what can i do? help please i need my phone :crying:
able to reboot the phone by keep pressing the power button?
if can.. 1st times reboot immediately pressing volume up, home and power button and it will reboot again.. A 2nd times reboot release the power button only.
Red screen = wrong kernel flashed (you flashed s7 flat kernel on s7 edge)(There's an option to select kernel during installation. You probably selected wrong option or didn't check it)
This can be solved easily by flashing the right kernel.
Everything but display should still work normally, so you should be able to enter recovery by holding power+home+volume up when the phone is off or before the s7 logo come up.
If you still cannot enter recovery mode. You can enter download mode by holding power+home+volume down and flash stock firmware with it and start over. But for this problem, you probably not need to do this.
Sent from my SM-G935F using Tapatalk
Hey mate,
like NonXtreme said, it looks like you installed the wrong kernel, so just reboot your device by pressing Power + Home + Vol Down, and when the device shut down press directly Power + Home + Vol Up, now you should get into the recovery.
Now you have to reinstall the Rom with the correct Kernel! (g935f maybe).
Let me know if there are further questions.
I recently updated my Samsung Galaxy Tab A T280 to the latest firmware and I lost my root. So this afternoon I re-rooted it. Or I attempted to, anyway. Everything seemingly went fine, and I booted into TWRP just fine. I went to flash the ROM and I also selected wipe cache/davlik cache to be done as well, and tapped reboot. My device then turned off and when it started the reboot, it got stuck on the Samsung Galaxy Tab A logo screen and would not move or power off by holding the power button (I tried for a LONG time by using a rubber band to hold it down so I didn't have to, with no luck), and every other combination of buttons wouldn't do a thing, except for holding power + vol down, which made it turn off and back on, but it wouldn't finish rebooting and it just got stuck at the Samsung Galaxy Tab A logo again. So then I thought that maybe plugging it into a charger might not be a bad idea, and after holding down power + vol down again, it turned off and turned on and showed a battery with a charging symbol. I've had it plugged in for an hour and it does not show a charge or do anything except for go back to that boot logo if I unplug it from the charger and again hold down power and volume down separately.
I know it's not hard bricked because it is somewhat responsive so I think there's a chance to fix it, hopefully. I just want it to turn on and fully reboot into anything or in any way that will allow me to be able to fix the issue. My computer will not recognize the device so ADB is not an option right now unless I'm wrong.
Thanks a lot guys, I am so confused and could really use some advice.
What firmware did you install
Try to install original firmware via software "Samsung Smart Switch" on your PC with connected tablet.
I too recommend that you try installing the last firmware that you were on via Odin. Also, when you hit that screen lock issue after a firmware flash, where only the Samsung logo appears do this:
1. press and hold Home + volume up and volume down along with power button (that's all 4 buttons). Hold it there for at least 20 seconds and it should power off.
2. Once the device powers off keep holding the buttons but let go of the volume down button.
3. Once the tablet starts to power back up again release the power button and then in about 1 to 2 second release the rest of the buttons.
This should get you back into recovery. You should at least be able to restore any backup, that you should have already, on your external micro SD.
Good luck.. : )
"Chance Favors the Prepared"
the above post is 100% right. Reboot back into recovery and you'll be good to go. Also twrp has a option to reboot back to recovery so this doesn't happen, just a fyi for future knowledge. Best of luck..
You tried to flash a rom with twrp?
You need to flash stock firmware with odin.
Good evening everyone, i'm having a serious issue with my samsung A5. It was rooted, with custom recovery and custorm rom (Android 6.1 i think).
2 Days ago, a chewingum got stuck on my screen. I tried to remove it with nail paint remover, it did the trick but then my home button stopped working: the button itself can be pressed normally, but it won't work. I also experienced randomly long home button press actions, so i decided to turn them off. I thought that few drops of liquid may actually have gone beneath the home button. Few hours later, i experienced more issues: volume going up without anyone pressing the button (and the buttons are not stuck at all, and that side never got close to liquids), power button not doing his job etc. I tried to do a soft reset by recovery (cleaning cache and dalvik) but i ended up aslo factory resetting it for a distraction. Reconfigured the device, everything was back to normal (except the home button) but then i also experienced a couple of random volume up and crashes upon making phonecalls. SO i decided to reflash the entire rom, downloaded it + gapps, put into the decide, rebooted in recovery. Wipe cache, dalvik and also system i think, then i tried to intall the zip files but they were not there (probably i should have avoided wiping system, i get confused sometimes). I turned the device off and on, and now i'm stuck on bootloop (regular mode), can reboot it but it seems i can't go in either recovery or donwload mode (so no odin flash). Device is not recognized by the Pc. I keep rebooting it with power + home + volume down and as soon as i see the screen turn black, i try to press again volume up + home to enter recovery, but it goes straight to bootloop.
Any idea on how getting out of this situation? Thank you in advance
Dharmost said:
Good evening everyone, i'm having a serious issue with my samsung A5. It was rooted, with custom recovery and custorm rom (Android 6.1 i think).
2 Days ago, a chewingum got stuck on my screen. I tried to remove it with nail paint remover, it did the trick but then my home button stopped working: the button itself can be pressed normally, but it won't work. I also experienced randomly long home button press actions, so i decided to turn them off. I thought that few drops of liquid may actually have gone beneath the home button. Few hours later, i experienced more issues: volume going up without anyone pressing the button (and the buttons are not stuck at all, and that side never got close to liquids), power button not doing his job etc. I tried to do a soft reset by recovery (cleaning cache and dalvik) but i ended up aslo factory resetting it for a distraction. Reconfigured the device, everything was back to normal (except the home button) but then i also experienced a couple of random volume up and crashes upon making phonecalls. SO i decided to reflash the entire rom, downloaded it + gapps, put into the decide, rebooted in recovery. Wipe cache, dalvik and also system i think, then i tried to intall the zip files but they were not there (probably i should have avoided wiping system, i get confused sometimes). I turned the device off and on, and now i'm stuck on bootloop (regular mode), can reboot it but it seems i can't go in either recovery or donwload mode (so no odin flash). Device is not recognized by the Pc. I keep rebooting it with power + home + volume down and as soon as i see the screen turn black, i try to press again volume up + home to enter recovery, but it goes straight to bootloop.
Any idea on how getting out of this situation? Thank you in advance
Click to expand...
Click to collapse
Sadly, no software can fix broken hardware, it's probably best, as you'll now know, not to pour chemical liquids onto electrical devices, and just what kind of chewing gum exists that requires such extreme cleaning measures from a flat, non-porous surface I'll never know.
That said, as for rebooting, a force-restart on your device *doesn't* require you to hold Home+Volume down+Power, that should only reboot you to bootloader/download mode.
Try again only holding Power+Volume Down. THEN, when your screen goes fully black, immediately switch to Power+Volume up+Home.
You should then boot into recovery mode without any loop.
Good luck!
D4ND310 said:
Sadly, no software can fix broken hardware, it's probably best, as you'll now know, not to pour chemical liquids onto electrical devices, and just what kind of chewing gum exists that requires such extreme cleaning measures from a flat, non-porous surface I'll never know.
That said, as for rebooting, a force-restart on your device *doesn't* require you to hold Home+Volume down+Power, that should only reboot you to bootloader/download mode.
Try again only holding Power+Volume Down. THEN, when your screen goes fully black, immediately switch to Power+Volume up+Home.
You should then boot into recovery mode without any loop.
Good luck!
Click to expand...
Click to collapse
I didn't dip the smartphone into a cup of liquid, i just took a piece of cotton, poured a bit of nail pain remover (don't know the exact name in english, sorry) on it and then scratched the part where the chewing gum was on (on the soft touch back key, which works 100% fine).
I am trying using the method you described, but it seems i can't go into recovery. Maybe i'm not quick enough! will keep trying. If you have any other suggestions i will be glad to hear that!
You could try to make a USB jig, or buy one off of eBay. They're really cheap. Its basicly just a resistens that force the phone to download mode. It have worked fine for all my Sammy's including A310 so it probably works for A (15) series as well.
Just put it in USB connector and press power for a few secs and you should be in download mode.
Just an idea if everything else fails
Sent from my Honor 5X using Tapatalk
go to samsung
A hardware problem could NEVER be fixed by software ways... Unfortunatelly...
It seems that liquid made some changes on your PCB (maybe dissolved some isolators inside??)...
Anyway, go to service or replace it!
Hello everyone, i've updates about my problem and i would be glad if you could kindly point me in the right direction.
I purchased an USB Jig as suggested by one of you guys, i forced the device into dowload mode and installed a fresh stock firmware + custom recovery. When i try to boot i get a bootloop on samsung logo, and can't go into recovery probably because of the broken home button. I would like to enter recovery by using ADB command, i used to do it in the early days of Android but i'm a bit rusty and all the guides tell the procedure from an already functioning device. Since i can start it properly, is there a way to reboot it in recovery via ADB?
Thank you in advance
Dharmost said:
Hello everyone, i've updates about my problem and i would be glad if you could kindly point me in the right direction.
I purchased an USB Jig as suggested by one of you guys, i forced the device into dowload mode and installed a fresh stock firmware + custom recovery. When i try to boot i get a bootloop on samsung logo, and can't go into recovery probably because of the broken home button. I would like to enter recovery by using ADB command, i used to do it in the early days of Android but i'm a bit rusty and all the guides tell the procedure from an already functioning device. Since i can start it properly, is there a way to reboot it in recovery via ADB?
Thank you in advance
Click to expand...
Click to collapse
if you can access Download mode try this. hold volume down+home+power button. once the screen is black simply turn your finger to volume up while still holding the power and home button then release when SAMSUNG appears.
Sent from my SM-A500F using xda premium
babyyeobo14 said:
if you can access Download mode try this. hold volume down+home+power button. once the screen is black simply turn your finger to volume up while still holding the power and home button then release when SAMSUNG appears.
Sent from my SM-A500F using xda premium
Click to expand...
Click to collapse
Thanks for the suggestion, but still couldn't get into recovery. I think the home button is really broken, therefore i need to access recovery in another way.
Cause i flashed the stock samsung firmware twice with odin and i can't still start the phone properly, every guide says that a wipe of cache and dalvik solves the situation. But i need to get into recovery for that.
I can't go into recovery with normal procedure probably because the home button is not working, and all the guides about adb commands say that you need to plug in your phone when it has fully started. So i either need a way to force the device into recovery with my computer, or a firmware that once flashed doesn't give me bootloop
I deleted all the things system partition, cache and all, the 3 data clearing options in the lineageOs recovery mode. And now with no OS, and nothing the interface is stuck at download mode, nothing happens.
Tried applying TWRP Recovery with odin, displays Pass, but can't be opened.
Tried passing auto-root writes Success, but nothing. Stock-Rom was passed through Odin bit it tells Fail, I even tried two versions. By continously trying only black screen appears, then samsung logo, then charging image, then download mode.
Help please.
I was using lineageOS 19.0 android 12 before this massacre and tried to sideload GApps but it lead to this, as after first attempt Gapps didn't load, so in the second attempt, I tried to become oversmart.
What to do ?? Please explain ?? I am a Noobie....
Sorry for tagging few people I don't know much, I'm new here.
Try pressing and holding volume up, power and home screen. When something appears let go, it should load TWRP if installed correctly.
Thanks. I will try....
Volume up + power + home doesn't work.
After 20 secs of pressing volume down + power + home, black screen appears, then charging image appears after 1-2 minutes, but twrp doesn't open.
After multiple auto-root flashing, and after multiple stock rom flash, this image was displayed after every rom flash....
Aditya Aniket said:
Volume up + power + home doesn't work.
After 20 secs of pressing volume down + power + home, black screen appears, then charging image appears after 1-2 minutes, but twrp doesn't open.
Click to expand...
Click to collapse
I would say twrp isn't installed then. You need to use Odin in the download mode.
Using odin i tried to flash 2 stock roms, but it tells failed, I should go to the samsung service center, maybe they will be able to help me...
No, they said it's not from this country so we can't do anything.
Can it be unbricked by flashing rom with replacing the recovery img. with another recovery img. , and then flashing with odin, if yes, then can you tell me step by step.