TWRP can't install any ROM - Galaxy Note 3 Q&A, Help & Troubleshooting

After seeing DarkLord's ROM for turning my Note 3 into a Note 7, I decided to give it a go.
I rooted my Note 3 [SM-N9005] with TWRP and went ahead with the install.
Unfortunately, a few seonds after it looks like it's installing, the phone restarts only to display the default Samsung Galaxy Note 3 wording in white with the black ground. It does nothing more.
I have tried other ROMs which result in the same and stock ROMS that display "Could not find 'META-INF/com/google/android/update-binary' in the zip file" instead.
My phone seems to be now totally screwed where I've got no idea what to do next so any help would be very much appreciated.

There is no need to root the phone before installing twrp as twrp can be flashed using Odin.
To flash the rom, did you wipe system, data, and cache before installing?
To start over, flash a stock rom using Odin, then reinstall twrp, perform and full wipe, and flash the custom rom.

audit13 said:
There is no need to root the phone before installing twrp as twrp can be flashed using Odin.
To flash the rom, did you wipe system, data, and cache before installing?
To start over, flash a stock rom using Odin, then reinstall twrp, perform and full wipe, and flash the custom rom.
Click to expand...
Click to collapse
I did wipe the above each time I try to install a ROM but it won't install any whatsoever, as described in my previous post.
Also Odin doesn't seem to see the phone anymore, although I'm not sure if I have to change a setting in TWRP for that to happen.
Maybe if I could install a new recovery manager then I might have a chance but can't get Odin to see my phone.
I'm really worried now, just can't understand what's going on.
Thanks again.

Odin can only recognize the phone if the phone is in download mode, not TWRP/recovery.

Related

[Q] [Wind] I tried flashing FoxHound ROM, and soft-bricked my phone. Any fixes?

Alright... where to begin? Lets start at what happened around yesterday. Prior to the whole weekend, I had CyanogenMod 10.1 installed on my rooted S4. Come Friday, I start to miss some of the stock Samsung features such as Air Gestures, Smart Stay, the stock Samsung camera, and all that. So, I install WanamLite (a custom rom) on my phone. It's good and all but for some reason, the Smart Stay isn't working. To fix this, I go online and start digging; I find people saying "yo, revert back to the original firmware and re-install the Rom, that should fix your LTE problem." I think to myself, "maybe this could help me too." And that's exactly what I do. I go online to SamMobile and download this ROM (http://www.sammobile.com/firmwares/?page=1&model=SGH-M919V&pcode=0#firmware). It installs with Odin and I was able to get back to the Stock Samsung firmware. I then proceed with my plan and install WanamLite; that also worked. So I'm all happy and stuff 'cause Smart Stay finally works but, shortly after fiddling with the re-stocked device, I get bored again. So, I start searching the forums for another rom to replace WanamLite (it was a good rom, but I wanted to try something else before settling down on it).
I find this ROM in the XDA-Developers S4 forum: http://forum.xda-developers.com/showthread.php?t=2303239. I try installing it; it works fine. But then, I notice that half my SD card is used up. So, I go into TWRP and click on Format Data (I'm not too sure about the name, I had CWM prior to the re-installation of Samsung stock firmware). After resetting the Data, I boot back into the phone and notice that the default layout is Easy Mode. (On the bright side, I freed 4 GB from my SD card). Easy Mode's incredibly annoying, so I wrestle with the phone for a while to change the launcher to Nova launcher, but to no avail. In the end, I decide to reflash the FoxHound ROM. I place the rom on my phone and boot into TWRP. That's where the problem comes. I selected: wipe cache, wipe delvic cache, wipe data. Then I wiped the cache and data, flashed the rom and, after that is when the phone started refusing boot up. From then on, it just displayed Samsung Galaxy S4 logo on the screen whenever I tried to start it.
What I tried to fix the issue: Re-installing the stock samsung firmware. (I think I ended up screwing up the phone even more with this. Before, I had TWRP installed but I couldn't boot into it, now I don't have any custom recovery installed and I still can't boot into the phone).
I can access the Download Mode and use Odin. I cannot boot into the recovery. When I hold Volume Up + Power + Home, it just says recovery in blue above the logo, and then, the phone reboots.
So, any ideas on how to fix it?
TL;DR: Tried installing FoxHound Rom. I wiped Delvic Cache, Cache, and Data, and after flashing the rom, the phone refused to boot up; it gets stuck on the Samsung logo. Before flashing, I did Format Data. After being unable to boot into the phone, I tried to flash the Stock Samsung Firmware on my S4. Nothing worked. Any ideas on how I should proceed?
splitinferno said:
So, any ideas on how to fix it?
Click to expand...
Click to collapse
Try using Odin mode to install Stock Samsung Firmware...
If it doesn't work,
Install Samsung Kies, put Phone into Odin mode, connect the USB and let KIES reinstall the whole firmware... Go to "Tools" -> "Emergency Firmware Recovery"
psycovirus said:
Try using Odin mode to install Stock Samsung Firmware...
If it doesn't work,
Install Samsung Kies, put Phone into Odin mode, connect the USB and let KIES reinstall the whole firmware... Go to "Tools" -> "Emergency Firmware Recovery"
Click to expand...
Click to collapse
I've already tried flashing the Stock Samsung Firmware using Odin, it didn't work. Also, I'm having no luck with Kies; it won't connect. Any other suggestions? :/
EDIT 1: Okay, so here's the deal right now: I was able to flash TWRP using ODIN. This granted me access to my recovery, somehow. So right now, I have the FoxHound_GearEngine0.2 ROM installation files on my SD card and I am booted into the recovery. What should I do? Should I try flashing again? For now, I'll just wait for a response.
EDIT 2: Out of curiosity and impatience, I tried flashing FoxHound but got an error:
Updating Partition Details
E: unable to mount data
E: unable to mount internal storage
TWRP v. 2.5.0.3
Go into the advanced menu in TWRP and try to mount data / internal storage. If you can't, then you're back to odin unless someone can find out something else
maazali said:
Go into the advanced menu in TWRP and try to mount data / internal storage. If you can't, then you're back to odin unless someone can find out something else
Click to expand...
Click to collapse
I tried to; it didn't work. I also tried clockworkmod recovery. That recovery said it said that the data was already mounted. For some reason, now the phone is stuck in a bootloop. On the bright side, I can freely access my recovery (although I can't do much in it). Should I try flashing other stock roms?
EDIT: Flashing the stock rom brought it back to the state it was in earlier. So now, it just hangs on the Samsung Galaxy S4 screen and no longer reboots continuously. I'm thinking of downloading other stock roms and flashing those.
UNBRICKED
splitinferno said:
I tried to; it didn't work. I also tried clockworkmod recovery. That recovery said it said that the data was already mounted. For some reason, now the phone is stuck in a bootloop. On the bright side, I can freely access my recovery (although I can't do much in it). Should I try flashing other stock roms?
EDIT: Flashing the stock rom brought it back to the state it was in earlier. So now, it just hangs on the Samsung Galaxy S4 screen and no longer reboots continuously. I'm thinking of downloading other stock roms and flashing those.
Click to expand...
Click to collapse
Alright, after struggling around with the device, I was able to unbrick it. I downloaded the stock ROM from samfirmware and flashed it using odin. After flashing it, it would stay on the Samsung Galaxy S4 logo and that's it and I wasn't able to boot into the recovery either. So, I flashed TWRP using odin and download mode, and found I was able to boot into recovery again. Screwing around with the recovery, I couldn't manage to do much so I decided to re-flash the stock firmware. After re-flashing, I had the same problem. This time, I tried accessing the stock recovery. I got access, which was something I couldn't get before. After getting access, I did Factory Reset/Data (it was something along those lines) and did a wipe cache. After wiping cache, the phone rebooted and, much to my delight, it was unbricked. After going through this, I think I might just like chill for like a month, or a year now with stock... .__.
Hahah nice job
Sent from my GT-I9505 using xda premium
splitinferno said:
Alright, after struggling around with the device, I was able to unbrick it. I downloaded the stock ROM from samfirmware and flashed it using odin. After flashing it, it would stay on the Samsung Galaxy S4 logo and that's it and I wasn't able to boot into the recovery either. So, I flashed TWRP using odin and download mode, and found I was able to boot into recovery again. Screwing around with the recovery, I couldn't manage to do much so I decided to re-flash the stock firmware. After re-flashing, I had the same problem. This time, I tried accessing the stock recovery. I got access, which was something I couldn't get before. After getting access, I did Factory Reset/Data (it was something along those lines) and did a wipe cache. After wiping cache, the phone rebooted and, much to my delight, it was unbricked. After going through this, I think I might just like chill for like a month, or a year now with stock... .__.
Click to expand...
Click to collapse
Next time don't wipe data in custom recovery because it will corrupt your data which would most probably end with not booting past the Samsung logo, if you want to wipe in a custom recovery for now you have to manually wipe system, cache and dalvik cache located in mounts in cwm recovery (not sure where to find it in twrp).
You should read a little before messing with things in recovery.
Ahahah that's funny because something similar happened to me. And I was going to suggest doing a factory reset via recovery because that's how I resolved my problem, then I see you did just that! (Y)
Sent from my GT-I9500

Cant figure out how to install custom rom, without loosing root acces

Dear XDA
I have been an android user for many years and rooting has been one of the things I always did to my devices. I am an owner of a Note 3, which I have rooted succesfully and used X-NOTE 13 rom for long time. Last week I wanted to try something new and after that everything seems to be impossible. Before I install any roms I always perfom full wipe of, system, data, cache, dalvik cache etc. (I do it inside the recovery). Afterwards I tried to install CRASH ROM V9 and the progress went fine. When the phone rebooted the strange things started to happened I couldn't find the rom's extra menu and couldnt find any of the functions that the rom contained. I just thought that it was problem with the rom itself therefore I tried to went back to X-NOTE, but without any luck. The X-NOTE installed probably but I couldnt boot into it, it was stucked at the "Samsung Note 3" logo. I tried to wipe cache and dalvik but without any luck and every time I rebooted from the recovery the recovery says "it seems your device doesnt have root access" and the recovery tries to gain root access.
Then I couldnt understand anything of what was happening so I went to stock using ODIN. After installing stock rom I used CF-ROOT and everythings went smooth and I could use SuperSU inside the stock rom. Then I installed a recovery and it didn't mentioned anything about root access, so I was ready to install my custom rom...at least I thought so....I installed X-NOTE again (because I knew that this rom worked before without any problems) and after the progress was done I couldnt boot into the rom again, it was stucked. I wiped the cache and dalvik and as soon I clicked reboot in recovery it tells me that I am not rooted.
Then I did the same thing again, went back to stock, installed CF-ROOT and recovery. This time I installed CRASH ROM instead and I could boot into the system, but the rom still misses the "rooted features" etc.
In other words, what have I done wrong? I cant seem to find the problem and I think that I have tried every possible solution?
Informations:
Model: ​SM-N9005
STOCK ROM: Tried both N9005XXUENB4 (German) and N9005XXUENC2 (Nordic firmware)
Custom Rom: Tried both X-NOTE and CRASH ROM
Recoveries used: TWRP, CWM and Philz CWM
Kernels: Tried with stock one and X-NOTE kernel 1.5
I hope you can help me I cant live with stock roms
Thanks in advance
Regards,
Nepoznati
Nepoznati said:
Dear XDA
I have been an android user for many years and rooting has been one of the things I always did to my devices. I am an owner of a Note 3, which I have rooted succesfully and used X-NOTE 13 rom for long time. Last week I wanted to try something new and after that everything seems to be impossible. Before I install any roms I always perfom full wipe of, system, data, cache, dalvik cache etc. (I do it inside the recovery). Afterwards I tried to install CRASH ROM V9 and the progress went fine. When the phone rebooted the strange things started to happened I couldn't find the rom's extra menu and couldnt find any of the functions that the rom contained. I just thought that it was problem with the rom itself therefore I tried to went back to X-NOTE, but without any luck. The X-NOTE installed probably but I couldnt boot into it, it was stucked at the "Samsung Note 3" logo. I tried to wipe cache and dalvik but without any luck and every time I rebooted from the recovery the recovery says "it seems your device doesnt have root access" and the recovery tries to gain root access.
Then I couldnt understand anything of what was happening so I went to stock using ODIN. After installing stock rom I used CF-ROOT and everythings went smooth and I could use SuperSU inside the stock rom. Then I installed a recovery and it didn't mentioned anything about root access, so I was ready to install my custom rom...at least I thought so....I installed X-NOTE again (because I knew that this rom worked before without any problems) and after the progress was done I couldnt boot into the rom again, it was stucked. I wiped the cache and dalvik and as soon I clicked reboot in recovery it tells me that I am not rooted.
Then I did the same thing again, went back to stock, installed CF-ROOT and recovery. This time I installed CRASH ROM instead and I could boot into the system, but the rom still misses the "rooted features" etc.
In other words, what have I done wrong? I cant seem to find the problem and I think that I have tried every possible solution?
Informations:
Model: ​SM-N9005
STOCK ROM: Tried both N9005XXUENB4 (German) and N9005XXUENC2 (Nordic firmware)
Custom Rom: Tried both X-NOTE and CRASH ROM
Recoveries used: TWRP, CWM and Philz CWM
Kernels: Tried with stock one and X-NOTE kernel 1.5
I hope you can help me I cant live with stock roms
Thanks in advance
Regards,
Nepoznati
Click to expand...
Click to collapse
weird.
all the rom you mentioned xnote & crash come with root access inside.
When you said you used all those 3 recoveries, did you try each rom with each recovery ?
and when you flash those rom, did you follow to do a clean full wipe as mentioned on each OP thread ?
clean full wipe is not only wipe cache and dalvik, but also the data (factory reset).
antique_sonic said:
weird.
all the rom you mentioned xnote & crash come with root access inside.
When you said you used all those 3 recoveries, did you try each rom with each recovery ?
and when you flash those rom, did you follow to do a clean full wipe as mentioned on each OP thread ?
clean full wipe is not only wipe cache and dalvik, but also the data (factory reset).
Click to expand...
Click to collapse
Yes I have and tried several other combinations too. First time I installed X-NOTE I wiped everything and installed X-NOTE without problems.
I cant seem to break the code, I am getting frustrated hour by hour. I have double checked everything, I am on the NC2 bootloader with the NC2 kernel, when trying to install X-NOTE I get stuck at "Samsung Glaxy Note 3" - I cant understand what the problem may be and it is beginning to be personal :/ heheh
But seriously what could I have done wrong?
Nepoznati said:
Yes I have and tried several other combinations too. First time I installed X-NOTE I wiped everything and installed X-NOTE without problems.
I cant seem to break the code, I am getting frustrated hour by hour. I have double checked everything, I am on the NC2 bootloader with the NC2 kernel, when trying to install X-NOTE I get stuck at "Samsung Glaxy Note 3" - I cant understand what the problem may be and it is beginning to be personal :/ heheh
But seriously what could I have done wrong?
Click to expand...
Click to collapse
To be frank... I have no idea. U flash before earlier, means u know how to flash it.
What I could think of, is just the recovery.
I ve been using cwm chenglu all this time (the one reported with less bugs, and most recommended at any rom thread). And jump from rom to rom every 1 week at least with no issue.
I will try tonite use twrp to flash rom. I will let u know if I face any problem.
SOLVED
antique_sonic said:
To be frank... I have no idea. U flash before earlier, means u know how to flash it.
What I could think of, is just the recovery.
I ve been using cwm chenglu all this time (the one reported with less bugs, and most recommended at any rom thread). And jump from rom to rom every 1 week at least with no issue.
I will try tonite use twrp to flash rom. I will let u know if I face any problem.
Click to expand...
Click to collapse
Finally, finally and finally solved!
Well it seems strange but the problem was the official kernel inside the stock roms that made it almost impossible to run any custom rom.
What I did to solve the problem:
1. Went back to stock rom using a rom with the newest baseband NC2, ex. N9005XXUENC2
1a. I did have som problems getting the bootloader updated, which means I was force to install it over ODIN 3.09 - use this bootloader NC2 BOOTLOADER (Thanks soloilmeglio for the bootloader)
2. I used CF-ROOT to gain root access
3. Then I installed CWM 6.0.4.8 recovery as recommended from antique_sonic (Updated few hours ago!)
4. Install the CivZ-SnapKat-Rev3.1-sm_n9005-4.4.2.zip kernel
5. Lets the phone reboot and check that everything works!
7: Boot into recovery and wipe system, data, cache, dalvik cache
8. Install the custom rom
Dont ask me why the kernel wasn't working from beginning and why it was "corrupted" after installing another custom rom - but now everything works as it should!
Thank you very much antique_sonic for helping me!
Nepoznati said:
Finally, finally and finally solved!
Well it seems strange but the problem was the official kernel inside the stock roms that made it almost impossible to run any custom rom.
What I did to solve the problem:
1. Went back to stock rom using a rom with the newest baseband NC2, ex. N9005XXUENC2
1a. I did have som problems getting the bootloader updated, which means I was force to install it over ODIN 3.09 - use this bootloader NC2 BOOTLOADER (Thanks soloilmeglio for the bootloader)
2. I used CF-ROOT to gain root access
3. Then I installed CWM 6.0.4.8 recovery as recommended from antique_sonic (Updated few hours ago!)
4. Install the CivZ-SnapKat-Rev3.1-sm_n9005-4.4.2.zip kernel
5. Lets the phone reboot and check that everything works!
7: Boot into recovery and wipe system, data, cache, dalvik cache
8. Install the custom rom
Dont ask me why the kernel wasn't working from beginning and why it was "corrupted" after installing another custom rom - but now everything works as it should!
Thank you very much antique_sonic for helping me!
Click to expand...
Click to collapse
Good then to know ur phone is okay.
I fully wipe with twrp last nite. And flash xnote. Hang at boot after done.
Fully wipe again, and flash assassins. A lot fc here and there.
I flash back cwm chenglu, full wipe, and flash back xnote. Now it runs nicely.
My phone not suit with twrp.
antique_sonic said:
Good then to know ur phone is okay.
I fully wipe with twrp last nite. And flash xnote. Hang at boot after done.
Fully wipe again, and flash assassins. A lot fc here and there.
I flash back cwm chenglu, full wipe, and flash back xnote. Now it runs nicely.
My phone not suit with twrp.
Click to expand...
Click to collapse
It could probably be a problem with TWRP as you mentioned earlier. After using CWM everything went smooth after updating my kernel. Last night I couldnt hold me back to try one more time, and I flashed X-NOTE with TWRP and I got the same problem as described in #1 post. Then I installed CWM and flashed X-NOTE again and everything got messed up. Then I restored everything, force installed the kernel and bootlaoder. After that installed CWM and then I was able to run X-NOTE without any problem.
I am not a professional developer but I may think that the problem is TWRP when it tries to flash the kernel under the process with may results in some problems. When using CWM from the beginning I do not get any problems but when using TWRP I need to restore everything back.

[Q] E:failed to mount /sdcard

Having some issues getting a recovery to be flashed on this new device, I am not use to a phone that when rooted doesn't have some stock recovery that actually works. And by that I mean, allows me to install zip from file. All I get is the option to reboot, flash from adb, install from external, wipe factory reset, wipe cache, and install from cache.
Sorry if this has been asked a few times before, but with my searching I didn't find any one answer that solved my problem. Tried flashing a recovery via odin but it said Auth fail for the recovery. Going to try a few other things and see what I can come up with.
Thanks in advanced!
What recovery are you trying to flash? I believe the closet thing we have to a custom recovery is safestrap. Is that what your trying to install?
Ysosrslawl said:
Having some issues getting a recovery to be flashed on this new device, I am not use to a phone that when rooted doesn't have some stock recovery that actually works. And by that I mean, allows me to install zip from file. All I get is the option to reboot, flash from adb, install from external, wipe factory reset, wipe cache, and install from cache.
Sorry if this has been asked a few times before, but with my searching I didn't find any one answer that solved my problem. Tried flashing a recovery via odin but it said Auth fail for the recovery. Going to try a few other things and see what I can come up with.
Thanks in advanced!
Click to expand...
Click to collapse
It sounds like you flashed philz touch recovery witch will not work with the VZW S5 you need to flash SafeStrap Recovery. You might need to Odin back to stock and re root your device to get it back to normal first.
chrisbass said:
What recovery are you trying to flash? I believe the closet thing we have to a custom recovery is safestrap. Is that what your trying to install?
Click to expand...
Click to collapse
I didn't flash anything when I first started rooting the phone I just used towelroot, then when the OTA messed it up I went and did the NCG to NE9 method using odin and towelroot. But every time I went into recovery, it has been the same. It wasn't until I used the toolkit from the forums that installed safestrap and busybox did I actually get a different recovery, but even if I reboot into recovery it still takes me to the stock one first and then on reboot i can access safestrap.
Yes, that's how safestrap works, through a process called "bootstrapping". It never replaces your stock recovery so when you boot into recovery it'll always be stock but upon boot you'll be presented with the safestrap option.....totally normal
On another note, my Supersu binaries wont update so I'm going back to stock anyway. I think I may leave it at stock for a while until I see some more ROMs come out.
Ysosrslawl said:
On another note, my Supersu binaries wont update so I'm going back to stock anyway. I think I may leave it at stock for a while until I see some more ROMs come out.
Click to expand...
Click to collapse
Your other option is what I have done. I first went the safestrap route but installed rom on rom slot before finding out about the bugz in safestrap. So I odined back to stock. Instead of installing something with bugz in it I rooted, installed supersu and Xposed framework with some modules. Wanam module gives you most of the customizations found in custom roms. Tons of other modules for pretty much anything you want to tweak. Works like a champ on stock system.

Note 4 Rom flashing problem

I have TWRP installed and the phone is completely wiped. I have installed the OK1 tar via odin. When i go to flash any TW Rom i get a recurring loop. The phone boots but the rom does not boot. I have tried an array of roms and have failed to have one load.
My steps:
Format using the option given in TWRP
Wipe every thing except my micro sd
Flash ( Any rom) and clear both caches
Reboot to system
Watch in despair as phone keeps booting.
The phone boots perfectly when I odin. Any help is appreciated.
Thanks in advanced
It's a kernel problem. Which roms in specific did you flash?
I flashed all of your Stock Zips and the Hybrid X roms
Can you please give me step by step instructions for what to do. Thank you very much

HELP! SM -G901F, TWRP can't find storage partition to mount

Guys this is help less.
After rooting my device I followed some instructions to get the Lineage 14. I flashed a BootLoader and a Modem as instructed and went forth to mount USB in order to transfer the custom rom into the device. But this is where the problem is.
It says E: Cant find partition to mount storage. I've tried to reboot, wide, data, storage, system and cache and repair the partition I don't know what else to do.
Anyone else can help? Btw I am fairly new to this stuff so please dumb it down for me.
Another thing, when I go to reboot my recovery it says my device isn't rooted and asks to install superSu, however it was rooted before I entered download mode and started installing bootloader and modem.
Now I have no operating system in the device so i can literally only use Recovery or download mode.
Is my device bricked? I don't know. :crying: :crying:
Pobi123 said:
Guys this is help less.
After rooting my device I followed some instructions to get the Lineage 14. I flashed a BootLoader and a Modem as instructed and went forth to mount USB in order to transfer the custom rom into the device. But this is where the problem is.
It says E: Cant find partition to mount storage. I've tried to reboot, wide, data, storage, system and cache and repair the partition I don't know what else to do.
Anyone else can help? Btw I am fairly new to this stuff so please dumb it down for me.
Another thing, when I go to reboot my recovery it says my device isn't rooted and asks to install superSu, however it was rooted before I entered download mode and started installing bootloader and modem.
Now I have no operating system in the device so i can literally only use Recovery or download mode.
Is my device bricked? I don't know. :crying: :crying:
Click to expand...
Click to collapse
If you can boot recovery, all is not lost.
First, are you sure that you flashed the correct bootloader/modem for your s5 model (G900 T, P, V, F, etc? Odin should not let you flash the wrong one, but anything is possible.
If Bl/modem is correct, them the next thing is to get the custom rom onto the phone.
-make sure you have downloaded everything you need (rom, root method(pref Magisk), gapps if wanted)
- boot into recovery, I'm recommending and assuming that you are using the latest Twrp, if not, d/l official Twrp for your model, and flash that with Odin
-In twrp select wipe, format data, just in case.
-now you should be able to mount usb storage, using the option in twrp
- now you should be able to mount your phone to your PC and transfer the rom, put it somewhere easy to find on the phone. also copy gapps and Magisk zips
-now, still in twrp, select install, select rom zip, select add more, select Magisk zip, also flash gapps at this time if you want to use them.
-click the button to flash
-click wipe cache/dalvik
-click reboot
-pray ?
BlueCyclone said:
If you can boot recovery, all is not lost.
First, are you sure that you flashed the correct bootloader/modem for your s5 model (G900 T, P, V, F, etc? Odin should not let you flash the wrong one, but anything is possible.
If Bl/modem is correct, them the next thing is to get the custom rom onto the phone.
-make sure you have downloaded everything you need (rom, root method(pref Magisk), gapps if wanted)
- boot into recovery, I'm recommending and assuming that you are using the latest Twrp, if not, d/l official Twrp for your model, and flash that with Odin
-In twrp select wipe, format data, just in case.
-now you should be able to mount usb storage, using the option in twrp
- now you should be able to mount your phone to your PC and transfer the rom, put it somewhere easy to find on the phone. also copy gapps and Magisk zips
-now, still in twrp, select install, select rom zip, select add more, select Magisk zip, also flash gapps at this time if you want to use them.
-click the button to flash
-click wipe cache/dalvik
-click reboot
-pray ?
Click to expand...
Click to collapse
Hey man! Thank you so much for your reply. I installed CPE1 bootloader and modem driver, honestly I don't even know what they do. Was this a wrong thing to do?
I rooted my device using cf auto root, then flashed the bootloader and modem using Odin. After that I (stupidly) tried to boot my stock OS and it was stuck in a bootloop.
Unfortunately I won't be able to try your instructions this till tomorrow evening but I'll keep you posted!! do you mind if I pm?
Edit: I was using twrp 2.8.7 I believe, could this have been the problem? Also I updated twrp to latest and tried micro sd as storage and flashed a Rom but the phone is still bootlooping
Pobi123 said:
Hey man! Thank you so much for your reply. I installed CPE1 bootloader and modem driver, honestly I don't even know what they do. Was this a wrong thing to do?
I rooted my device using cf auto root, then flashed the bootloader and modem using Odin. After that I (stupidly) tried to boot my stock OS and it was stuck in a bootloop.
Unfortunately I won't be able to try your instructions this till tomorrow evening but I'll keep you posted!! do you mind if I pm?
Edit: I was using twrp 2.8.7 I believe, could this have been the problem? Also I updated twrp to latest and tried micro sd as storage and flashed a Rom but the phone is still bootlooping
Click to expand...
Click to collapse
Ok I see you have S5 plus. I'm not familiar with that device to know which baseband it should be.
One thing you might try is to boot recovery and clear cache/dalvik and then try booting the custom rom.
If all else fails, you might try Samfirm
https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
That should give you a stock firmware file to flash with odin.
You can pm if you need to, I don't own an S5+, nor am I a veteran flasher but I will try to help if I can.
BlueCyclone said:
Ok I see you have S5 plus. I'm not familiar with that device to know which baseband it should be.
One thing you might try is to boot recovery and clear cache/dalvik and then try booting the custom rom.
If all else fails, you might try Samfirm
https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
That should give you a stock firmware file to flash with odin.
You can pm if you need to, I don't own an S5+, nor am I a veteran flasher but I will try to help if I can.
Click to expand...
Click to collapse
Ive tried the suggestion you gave me, no success. However I honestly dont know if it could be my fault. I'm gonna flash the stock firmware and restart the whole root process.
Thanks for your help man!
Pobi123 said:
Ive tried the suggestion you gave me, no success. However I honestly dont know if it could be my fault. I'm gonna flash the stock firmware and restart the whole root process.
Thanks for your help man!
Click to expand...
Click to collapse
Ok sorry I couldn't be more help
Oh, you don't need to use of cfautoroot anymore, you can just flash Magisk after the rom, and then use Magisk manager to manage all your root permissions.
So if you are going back to stock, I would:
-Flash stock in Odin
-probably boot stock once to verify (first boot takes long)
-odin flash latest twrp(uncheck auto-reboot, just battery pull after it says pass)
-power on phone with key combo to boot recovery
- format data
-flash rom/gapps?/Magisk
-wipe cache/dalvik
-reboot system (first boot will take long)
Hope you get your phone working again
BlueCyclone said:
Ok sorry I couldn't be more help
Oh, you don't need to use of cfautoroot anymore, you can just flash Magisk after the rom, and then use Magisk manager to manage all your root permissions.
So if you are going back to stock, I would:
-Flash stock in Odin
-probably boot stock once to verify (first boot takes long)
-odin flash latest twrp(uncheck auto-reboot, just battery pull after it says pass)
-power on phone with key combo to boot recovery
- format data
-flash rom/gapps?/Magisk
-wipe cache/dalvik
-reboot system (first boot will take long)
Hope you get your phone working again
Click to expand...
Click to collapse
Good News! Phone is back in full working order after flashing stock firmware. It was kinda scary though, I had to fix an error in Odin and then the phone wouldn't even boot up! Left it over night, booted it again and it worked fine Thanks a lot for your help, I'll try not to soft brick my device again

Categories

Resources