Backup and Recovery IMEI with QPST Tool
In this tutorial you learn how to make an backup of your IMEI. Qualcomm developes for customers a lot of interesting tools, QPST is the most important suite for us, because with this tools we can: flash , unbrick , restore imei and do other stuff for our phones .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
With modding (and bad flashing) every days, a lot of people lost their imei. For prevent bad situation is better if we start to learn how to do an backup of an IMEI and NVRAM configuration, is easy and secure. The most sicure way.
For do this you need :
- Windows 7 (or 8.1) x64 ;
- QPST 2.7 ;
- QDLoader HS-USB drivers pack ;
- ADB & Fastboot ;
STEPS:
- Install drivers and QPST, reboot the PC ;
- Enable developer settings on your device ;
- Enable Debug on your device ;
- Connect the phone on the PC ;
- If don't* popup an "Diasgnostics Port COM" on device manager (usually this port is enabled in the factory rom)
*Open an cmd window and enable it with this command "Diagnostics Port" with this commands:
adb shell
su
setprop sys.usb.config diag
(now Diagnostics port will popup)
- Open QPST configuration and add the port "Ports" ----> "Add new port" ----> Add the name of the port (for example COM5)
- Now click on "Start Clients" ------> "Software Download" -----> "Backup"
- Add an name at this file, select the folder and push "Start" (don't disconnect the phone!!)
- When process is complete, you have an "xqnc" file full working, with your imei and nvram configuration stored.
WITH THIS METHOD YOU CAN RESTORE HOW MUCH TIME YOU WANT THE IMEI.
thx,good
Do I have to wait on?
KyPbP said:
Do I have to wait on?
Click to expand...
Click to collapse
Yep
Naphtha said:
Yep
Click to expand...
Click to collapse
Long? I waited for about 5 minutes
KyPbP said:
Long? I waited for about 5 minutes
Click to expand...
Click to collapse
Yep sometimes is too slow, for restore my imei tomorrow the tool take 10 mins T_T
Naphtha said:
Yep sometimes is too slow, for restore my imei tomorrow the tool take 10 mins T_T
Click to expand...
Click to collapse
I waited for 15 and did not reach 100%. But the file appeared, 996kb.
Mmm check the drivers
Inviato dal mio kenzo utilizzando Tapatalk
Naphtha said:
Mmm check the drivers
Inviato dal mio kenzo utilizzando Tapatalk
Click to expand...
Click to collapse
Diagnostics 9091D
Thank you for very useful tutorial..
No any error. And backup process Complete msg received.
my nvram backup file is only 990kb is this ok?
Sent from my A0001 using XDA-Developers mobile app
KyPbP said:
Diagnostics 9091D
Click to expand...
Click to collapse
Try to reinstall it or change the usb port
Inviato dal mio kenzo utilizzando Tapatalk
Apparently (from my failed experience) one of the requirements of this technique is the phone needs to be already rooted.
If that's the case, it'd be great to have it added to the first post.
Thanks
If anyone lost imei, i Can recommend this Tool.
I lost completely imei and efs.
Bring back my phone
http://forum.xda-developers.com/redmi-note-3/how-to/flash-recover-efs-snapdragon-t3406789
diagnostic port won't show up with Cm13.
nice very helpful to protect imei
The QPST Configuration tool worked as a charm without any errors whatsoever. I have just one query. The XQCN file generated is 989 kB in size. Is that the right size? If not, what size should it be?
ayush3051 said:
The QPST Configuration tool worked as a charm without any errors whatsoever. I have just one query. The XQCN file generated is 989 kB in size. Is that the right size? If not, what size should it be?
Click to expand...
Click to collapse
Yes aren't an large file
Inviato dal mio ZUK Z2131 utilizzando Tapatalk
Quit ,adb from command.
kate qcn backup pleashe
kate qcn backup lınk pleashe
Same problem here.
The backup stops forever at 99%
I also tried to change port but the problem remains.
The Drivers seems to work.
I tried twice and the result was the same, a 1074kb archive.
Related
Hello I just bought a Samsung Galaxy S4 GI9505 used locked to EE.
I wanted to unlock it and found on ebay unlocking for £5...
from
http://www.ebay.co.uk/itm/271624591845
So I thought I'd try that.
Then it required the phone to be rooted so I rooted it with towelroot and everything was fine...
Then I selected gi9505 to unlock my phone it came up with a error...
22:55:19 - ADB Device: GT-I9505
22:55:19 - SW Version: I9505XXUFNC4 (Android: 4.4.2)
22:55:19 - Checking SU Root Access..
22:55:22 - ROOT Access: True (SuperUser) Processing..
22:55:22 - Searching modem on COM9 Please Wait..
22:55:23 - Backupping NVM Now Please Wait..
22:57:31 - Found M9KEFS1 at /dev/block/mmcblk0p13
22:57:31 - Found M9KEFS2 at /dev/block/mmcblk0p14
22:57:31 - Found M9KEFS3 at /dev/block/mmcblk0p15
22:57:31 - Backupping Blocks to SDCard..
22:57:35 - Current Device Imei: --------------
22:57:36 - Current MSLADDR: RF1D562D8P
22:57:37 - Rebooting phone.. please wait...
22:59:38 - MSL Bypass: Failed Restoring Backup
22:59:38 - Restore Done, Rebooting phone..
ERROR: Bypass Failed.. Please try again
Now when I put a sim card in I get a white no entry signal icon instead of the option to put the sim card unlock code in box?
Please can someone help
IMEI number above..deleted by me for safety.
Thanks
Hello, I answer here to help also someone that may have your same problem.
Go in Settings>Device info and see "Baseband version", paste here the code that you see
AntaresOne said:
Hello, I answer here to help also someone that may have your same problem.
Go in Settings>Device info and see "Baseband version", paste here the code that you see
Click to expand...
Click to collapse
Exactly My PM! @AntaresOne
His baseband is I9505XXUFNC4
Sent from my GT-I9500 using XDA Free mobile app
@DeepankarS
As I wrote in PM:
Sounds like a bad efs, a backup should ALWAYS be made before touching the simlock things.
In S4 EFS contains IMEI, simlock infos, some radio calibration data, gyroscope sensor calibration data, bluetooth & wifi MAC addresses, some carrier things, DRM stuff and some other things..
Click to expand...
Click to collapse
@XDA00000
Download Root Browser from Play Store and go in efs folder, take a screenshot and upload here
Inviato dal mio GT-I9505
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AntaresOne said:
@DeepankarS
As I wrote in PM:
@XDA00000
Download Root Browser from Play Store and go in efs folder, take a screenshot and upload here
Inviato dal mio GT-I9505
Click to expand...
Click to collapse
@AntaresOne, @DeepankarS
Thanks you both for your kind help...
Here is as requested the screenshots.
Many thanks, hope you can help
Cheers
update
@AntaresOne, @DeepankarS
Just an update, the phone works fine ( can make / receive calls, send text etc) with the network it is locked to EE UK.
Only the IMEI number comes up unknown insettings / or *#060# dialer IMEI number comes up as 01
Thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
IMEI backup/restore tool for Samsung Galaxy S4 Active GT-I9295
Brought to you by AntaresOne
Explanation
The Qualcomm variant of Galaxy S4 doesn't have IMEI stored in EFS as most people think, it's stored in another place. Partitions to backup/restore are 8, each is required by the system to have IMEI. These are: EFS, modemst1, modemst2, m9kefs1, m9kefs2, m9kefs3, backup and fsg. Sometimes may happen that while modding your phone you lose IMEI, that's why I made this tool. It doesn't do miracles, so if you lose IMEI and don't have a backup, you're lost.
Features
Complete IMEI backup
Autozipping of saved partitions
Installation
Download tool from the link below
Put the zip file in your sdcard
Reboot in recovery
Install zip from sdcard
Choose downloaded zip file
Reboot system
Usage
When installed, the "imeibkp" executable goes in /system/bin. Obviously root is a must. This is not an app, so to run it you must use Terminal Emulator. It's very user-friendly and n00b-approved (joking :laugh, normally you shouldn't run into issues while using it.
Open Terminal Emulator
Write su and press enter (this is to obtain root access)
Invoke this tool by writing imeibkp and pressing enter
To restore just invoke again imeibkp
In case you want to export your backup, it is in /sdcard/IMEIBackup (Internal Memory on PC through USB connection)
If you change ROM you'll lose this tool, in this case just follow again Installation steps
Download
IMEI Backup tool is hosted on my AndroidFileHost
XDA:DevDB Information
IMEI backup/restore tool for Galaxy S4 Active GT-I9295, Tool/Utility for the Samsung Galaxy S4 Active
Contributors
AntaresOne
Version Information
Status: No Longer Updated
Stable Release Date: 2015-01-06
Created 2015-01-06
Last Updated 2017-05-19
Changelog
25/5/2015
Added support for the following variants:
GT-I9508
GT-I9515L
SGH-M919N
SGH-M919V
SGH-I337C
SCH-R970
SCH-R970C
SCH-R970X
4/3/2015
Added support for Bell SGH-I337M (same thread as AT&T variant)
9/2/2015
Added Galaxy S4 AT&T support
Fixed Galaxy S4 Active issue
31/1/2015
Tool rewrote from scratch
Added autozipping of saved partitions (now tool's output is a zip file called "IMEIBackup.zip" in /sdcard/IMEIBackup)
6/1/2015
Initial public release
Other Samsung devices
If you want this tool for your own Samsung device PM or mail me at [email protected] for details.
Nice to see my contribution made it possible to extend the script to support GT-I9295 [emoji4]
Ok! Sorry, but how I can restore it?
Tks for this tool!
marcel.s said:
Ok! Sorry, but how I can restore it?
Tks for this tool!
Click to expand...
Click to collapse
open terminal
su
type "imeibkp"
It will ask if you want to restore
Update available
Rewrote from scratch, autozipping of saved partitions (tool's output now is "IMEIBackup.zip" in /sdcard/IMEIBackup)
Download: https://www.androidfilehost.com/?fid=95916177934520606
AntaresOne said:
Update available
Rewrote from scratch, autozipping of saved partitions (tool's output now is "IMEIBackup.zip" in /sdcard/IMEIBackup)
Download: https://www.androidfilehost.com/?fid=95916177934520606
Click to expand...
Click to collapse
After Typing ImeiBkp the terminal says Galaxy S4 Active GT-I9295 Found and returns back to the prompt!!!! No Backup Or Restore Option To Be Found !!!!!
Not Showing Options To Backup On GT-I9295!!!!
atfaniqbal said:
After Typing ImeiBkp the terminal says Galaxy S4 Active GT-I9295 Found and returns back to the prompt!!!! No Backup Or Restore Option To Be Found !!!!!
Click to expand...
Click to collapse
Thanks For Your Script!!! Corrected The Error In The Script To Backup JActiveLte Device And Seems Working Now!!! Attaching The Updated Zip With The Needed Correction!!
Update available
Support for Galaxy S4 AT&T and fixed backup options not showing on Galaxy S4 Active.
Download: https://www.androidfilehost.com/?fid=95916177934526170
someone have a backup de efs? i lost mine.. im from colombia. and i dont have signal cant make calls or receive... only data..!! please help me
someone have a backup de efs? i lost mine.. im from colombia. and i dont have signal cant make calls or receive... only data..!! please help me
for your quickstart manual:
not only 'Terminal Emulator' ... it needs BusyBox too.
https://play.google.com/store/apps/details?id=stericson.busybox
http://apk-dl.com/stericson.busybox
This method worked with Yoga Tab 2 1050l, maybe it will work on 1050f.
Step 1: Download & extract this STOCK 1050LC
Step 2: Download & install "Phone Flash Tool", "Yoga 2 USB driver". Skip If already installed
Step 3: Power Off your tablet and open Phone flash tool.
Step 4: On "Phone flash tool" Click on [File>Option>General tab>Flash option] then click on "Force fastboot sparsing 500MB"
Step 5: On "Phone flash tool" Click on > Download Tab > Scatter Loading. Now locate scatter firmware file (Present firmware folder extracted in Step 1) and load it.
Step 6: Connect your device to PC via data cable (Keep in mind the device should be switch Off). Now click on Download Button / Upgrade Button (having a sign of Green Arrow) to begin to flash Flashing.
Step 7: Wait until download complete. don't turn off your tablet until this complete.
Warning: Do this on your own responsibility.
I'm not a developer, I just share this method to help yoga tab 2 users.
Good luck, and let me know If there's anything unclear.
"Warning1: Trying to flash any software to your device before backup your IMEI is high risk you could lose it if anything goes wrong.
I flashed this ROM 2 times, the first one was fine, the second I had a problem with the flash tool and I lost my IMEI and wasn't able to make calls, and I wasn't able to restore it myself."
Warning 2: If you are a lollipop user you need to update your bios with the tool in the attachments it's very easy to use if there are any problems just ask.
thank you, but I can't find file!
ps. I use 1050f
It's useless without the link
neverapple88 said:
thank you, but I can't find file!
ps. I use 1050f
Click to expand...
Click to collapse
Nowhere on the Internet cold I have found the link to download the software. How can you not attach the crucial part?
I search on the internet but is impossible download fli step1 1050lc firmware. Link please is possible? I have 1050l. Thanks
Sent from my SM-N910F using XDA-Developers mobile app
Link added
How backup IMEI ?
maciej77 said:
How backup IMEI ?
Click to expand...
Click to collapse
I think you can do this with TWRP Recovery.
From backup select this partitions: ESP-BOOT-RECOVERY-FASTBOOT-FACTORY-CONFIG and another again back up of ESP-FACTORY-CONFIG
I'm not sure about this.
Witam mam problem chciałem zaktualizować system ale przy każdym romie mam ten sam błąd przy system.img czy ktoś może wie czemu?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Required tools:
1. Sp Flash tool mod edit - link removed
2. Drivers mod edit - link removed
3. Firmwares: K50a40mod edit - link removed
Other Varients:mod edit - link removed
4. Windows pc
5. Lenovo K3 Note(ofcorse )
Before doing this, Take Nvram(imei) backup:mod edit - link removed
Download all required files, then unzip.
install drivers, if device not showingin spflash tool(put your pc advanced startup with driver signature enforcement then install drivers)
Stock rom Installation process:
1.Open sp Flash tool.
goto options(located on top left corner)
then select download, in DA DL ALL checksum options tick on both>> USB checksum and Storage checksum(close this window)
2. select scatter-Loading-File from firmware folder.
3. select Download only. (if u select format all+download your imei numbers will be gone)
4. Then click on download button.
5. switch off your mobile, then remove battery and re insert it, then connect
Big right mark will appear after success.
Follow all instructions carefully,
Don't blame me if anything went wrong.
plz download drivers from given link.
use latest spFlashTool.
Press Thanks if my process work.
Thumbs up.:good:
Hi man,
at first I want to thank you, this helped me to unbrick my phone, but ofcourse I did deleted my IMEI, SN and so on.
I know there are few ways how to change it, but none seems to work for me so far. I have the right drivers (v 1.1.13), but not any program is able to connect to my phone except to SP flash tool.
So my question is. Is there any way how to root this version of andriod?
I have already tried Kingroot, RomasteruSU, framaroot and not even MTK Engineering mode was not able to help me change IMEI.
Thanks in advance
M
enterthename said:
Hi man,
at first I want to thank you, this helped me to unbrick my phone, but ofcourse I did deleted my IMEI, SN and so on.
I know there are few ways how to change it, but none seems to work for me so far. I have the right drivers (v 1.1.13), but not any program is able to connect to my phone except to SP flash tool.
So my question is. Is there any way how to root this version of andriod?
I have already tried Kingroot, RomasteruSU, framaroot and not even MTK Engineering mode was not able to help me change IMEI.
Thanks in advance
M
Click to expand...
Click to collapse
https://forum.xda-developers.com/k3-note/help/null-invalid-imei-permanent-fix-100-t3472491
follow this tutorial..
panuganties said:
https://forum.xda-developers.com/k3-note/help/null-invalid-imei-permanent-fix-100-t3472491
follow this tutorial..
Click to expand...
Click to collapse
Hi,
tried to do exactly what is there, but still no luck. I had only APDB before, so I hoped to be successfull this time with MD1_DB.
But what happened. I already had drives and SN writer (2.1504), but downloaded older version (1.1728) anyway. Got into point where phone was connected and in meta mode. The newer version of SN Writer gave me error message pretty fast and calceled meta mode. See SN writers error message img. below.
I have also tried older version, it took bit more time, then it asked me to fill my IMEI for a second time, but ended up with error message again after that. The only thing different was that phone stayed in meta mode. Put second print screen error as well.
Any suggestions?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
enterthename said:
Hi,
tried to do exactly what is there, but still no luck. I had only APDB before, so I hoped to be successfull this time with MD1_DB.
But what happened. I already had drives and SN writer (2.1504), but downloaded older version (1.1728) anyway. Got into point where phone was connected and in meta mode. The newer version of SN Writer gave me error message pretty fast and calceled meta mode. See SN writers error message img. below.
I have also tried older version, it took bit more time, then it asked me to fill my IMEI for a second time, but ended up with error message again after that. The only thing different was that phone stayed in meta mode. Put second print screen error as well.
Any suggestions?
Click to expand...
Click to collapse
press and hold volume- and insert usb cable..
thread closed until the download links will be available
OnePlus 5T Unbrick tool
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here is the Oneplus 5T Unbricking Tool files provided by OnePlus during a Remote Session
Download
No Password Needed
OxygenOS 4.7.4 (Nougat 7.1.1)
OxygenOS 5.1.3 Thanks to @Titokhan
OxygenOS 5.1.7 (Oreo 8.0.1)
Drivers
OnePlus.QualcommDrivers.zip
A Fantastic Video of How To Unbrick OnePlus 5T
Thanks to @hypergamer1231
https://www.youtube.com/watch?v=PpLvmID1wdI
How To:
For the on Plus 5T
Step 1: Download Driver and Unbricktool
Step 2: Extract Drivers and Recovery Tool files on Desktop.
Step 3: If you are using Windows other than Windows XP,turn off Driver Signature Enforcement.To do so,follow this guide :
http://www.howtogeek.com/167723/how....igned-drivers/
Step 4: Press the power button for 40 seconds to turn off the phone.
Step 5: Press the volume up button for 10 seconds, while connecting the device with the computer.
Step 6: Open your device-manager and make sure in "Unknown devices" is one device with the name "QHUSB_BULK".
Step 7: Right Click on your device in the device manager and select Update Device Software. Choose manually the drivers folder and install the driver.
Step 8: When the device shows as "Qualcomm 9008", go run the MSM Download Tool as administrator.
Step 9: Click start at top left corner and wait for it to finish (green text will come).
Step 10: Disconnect phone from PC and boot into system.
thanks - @LloydSmallwood
!!! I AM NOT RESPONSIBLE FOR ANY POSSIBLE DAMAGE DONE TO YOUR DEVICE AS A RESULT OF FLASHING AND TESTING, I AM NOT RESPONSIBLE FOR ANY BRICKED PHONES OR LOST DATA... FLASH AND TEST AT OWN RISK !!!Thanks to:
[email protected]dabistduja and @randallstevens for Decryption
[email protected]vtec303 - for testing 128GB version
[email protected]raptor2003 - for testing 128GB version
Nice and how you decrypt the file as it has password.
[email protected] said:
Nice and how you decrypt the file as it has password.
Click to expand...
Click to collapse
Just run a clipboard saving program in the background and wait for them to paste the password [emoji14]
Sent from my ONEPLUS A5010 using Tapatalk
paultje162 said:
Just run a clipboard saving program in the background and wait for them to paste the password [emoji14]
Click to expand...
Click to collapse
Intelligent:good:
boontho[email protected] said:
Intelligent:good:
Click to expand...
Click to collapse
excuse me but I do not understand what you said to do to pass the password
lerieur said:
excuse me but I do not understand what you said to do to pass the password
Click to expand...
Click to collapse
You get the answer when you have remote session with op L2 technician
paultje162 said:
Just run a clipboard saving program in the background and wait for them to paste the password [emoji14]
Sent from my ONEPLUS A5010 using Tapatalk
Click to expand...
Click to collapse
Genius....
Thanks anyway.
I have scheduled with LV 2 Technician tonight to fix my brick device.
This thread could be useful for my 2nd time bricking : D
tonni3 said:
Genius....
Thanks anyway.
I have scheduled with LV 2 Technician tonight to fix my brick device.
This thread could be useful for my 2nd time bricking : D
Click to expand...
Click to collapse
Ummmmm this tool above means u don't need them, those are the same files u will get from them and it shows u how to unbrick so u can do it urself
those files above are not encrypted.
paultje162 said:
Just run a clipboard saving program in the background and wait for them to paste the password [emoji14]
Sent from my ONEPLUS A5010 using Tapatalk
Click to expand...
Click to collapse
Bradl79 said:
Ummmmm this tool above means u don't need them, those are the same files u will get from them and it shows u how to unbrick so u can do it urself
those files above are not encrypted.
Click to expand...
Click to collapse
Yes, but I don't have the password and I had to rush for work this morning, just found this thread when lurking forum at work.
tonni3 said:
Yes, but I don't have the password and I had to rush for work this morning, just found this thread when lurking forum at work.
Click to expand...
Click to collapse
if u use the method above, please let us know how it went. Thank u
Very nice.:fingers-crossed::fingers-crossed::fingers-crossed:
I have factory resetted my phone using this msm tool and I can confirm this tool along with the files works for oneplus 5T, thanks for uploading this, cheers.
vtec303 said:
I have factory resetted my phone using this msm tool and I can confirm this tool along with the files works for oneplus 5T, thanks for uploading this, cheers.
Click to expand...
Click to collapse
what storage size do u have?
Bradl79 said:
what storage size do u have?
Click to expand...
Click to collapse
mine is 128gb, but this tool should work on 64gb as well afaik? cheers.
What's the password
hypergamer1231 said:
What's the password
Click to expand...
Click to collapse
There's no password, its all open and working, but please make sure the qualcom drivers are installed on your windows machine and recognise your phone as per the instructions on the link in op, cheers.
I have not test this and I hope I won't have to do so soon, but If that's work as expected this should definitively get pinned.
Thank !
Thank you, This has worked for me too.
fyi, I have a 128gb version.
Ti amo !
Grazie.....
Thank you for confirming your storage and this should work just fine for both the 128GB and 64GB, I was just making sure. B/C the OnePlus One had a multi storage version.