Related
Well. that's the sh#%*t I made:
I tried to revert to stock then I used this package: Acer_A500_7.006.01_COM_GEN2.zip flashing it with vol. - + power button.
The problem is that the screen went on as it was install this update normally with the message "booting recovery kernel image", but, after spinning Android gears, the device is stuck at the green Android robot with the yellow exclamation.
If I try to boot with power button instead, then it's stuck on the boot screen Android logo (the shiny blue one).
I tried to reset and to flash another update.zip, unsuccessful. With the last ROM I had, civato Flexthunder, I had CWM, but now, neither it's menu is showed if I press only vol. - + power button - what I have is "booting recovery kernel image", then the Android exclamation on the screen. Notice that, when I was using that ROM, I had CWM. But I used Acer Recovery Installer to flash the US recovery from it's menu. After that, I installed CWM again with this Acer Recovery Installer...
In the end, I tried what I read here, but I can't solve on my own...
It's so confusing! How can I have my A500 back, please, someone!!!
Need to know how you got back to stock recovery? Did you use Acer Recovery Installer?
If so you should just be able to put a stock 3.01 image on your SD card labeled "update.zip" and recover from there?
kjy2010 said:
Need to know how you got back to stock recovery? Did you use Acer Recovery Installer?
If so you should just be able to put a stock 3.01 image on your SD card labeled "update.zip" and recover from there?
Click to expand...
Click to collapse
Yes, K, I used that Acer Recovery Installer when I was still with civato's ROM.
So, from Acer Recovery menu, I flashed that "US stock recovery" version available there. Following that, I installed CWM from Acer Recovery menu again. So, I put that update cited above and... stuck on that!
mmm... but that update is 3.2 - I didn't try with a 3.01... let me see that...
UPDATE: the links from Vache post for 3.01 full packages are a kind of xml... It's not possible to get the zip files! Is there another available link, please?
I'm not even going to ask why you used Acer Recovery Installer once you had installed a rooted ROM, because I'm afraid of the answer .
I think I might still have a 3.01 at home, but won't be there until Wednesday.
alexrb said:
Yes, K, I used that Acer Recovery Installer when I was still with civato's ROM.
So, from Acer Recovery menu, I flashed that "US stock recovery" version available there. Following that, I installed CWM from Acer Recovery menu again. So, I put that update cited above and... stuck on that!
mmm... but that update is 3.2 - I didn't try with a 3.01... let me see that...
UPDATE: the links from Vache post for 3.01 full packages are a kind of xml... It's not possible to get the zip files! Is there another available link, please?
Click to expand...
Click to collapse
alexrb said:
Well. that's the sh#%*t I made:
I tried to revert to stock then I used this package: Acer_A500_7.006.01_COM_GEN2.zip flashing it with vol. - + power button.
The problem is that the screen went on as it was install this update normally with the message "booting recovery kernel image", but, after spinning Android gears, the device is stuck at the green Android robot with the yellow exclamation.
If I try to boot with power button instead, then it's stuck on the boot screen Android logo (the shiny blue one).
I tried to reset and to flash another update.zip, unsuccessful. With the last ROM I had, civato Flexthunder, I had CWM, but now, neither it's menu is showed if I press only vol. - + power button - what I have is "booting recovery kernel image", then the Android exclamation on the screen. Notice that, when I was using that ROM, I had CWM. But I used Acer Recovery Installer to flash the US recovery from it's menu. After that, I installed CWM again with this Acer Recovery Installer...
In the end, I tried what I read here, but I can't solve on my own...
It's so confusing! How can I have my A500 back, please, someone!!!
Click to expand...
Click to collapse
Had the same issue, then I realized that the update.zip has to be on the EXTERNAL sd card...not internal storage.
Hope this helps.
kjy2010 said:
I'm not even going to ask why you used Acer Recovery Installer once you had installed a rooted ROM, because I'm afraid of the answer .
I think I might still have a 3.01 at home, but won't be there until Wednesday.
Click to expand...
Click to collapse
LOL
I got the point...
So, I've found a 3.01 here. I'm going to try it now...
Nothing
So, I put the 3.01 from here:
http://forum.xda-developers.com/showpost.php?p=15379983&postcount=1
as update.zip in the SD card. Did it with vol - and power button. Again, the Android robot with yellow exclamation.
It's strange... everyone here did it and apparently it worked perfectly, why not in my case?
UPDATE: I changed the update for 2GB SD card. The progress bar went on briefly and so stopped in some point and, again, the Android robot with yellow exclamation.
alexrb said:
So, I put the 3.01 from here:
http://forum.xda-developers.com/showpost.php?p=15379983&postcount=1
as update.zip in the SD card. Did it with vol - and power button. Again, the Android robot with yellow exclamation.
It's strange... everyone here did it and apparently it worked perfectly, why not in my case?
UPDATE: I changed the update for 2GB SD card. The progress bar went on briefly and so stopped in some point and, again, the Android robot with yellow exclamation.
Click to expand...
Click to collapse
Why dont you try the 3.1 Acer_A500_4.010.10_COM_GEN2 from Vache thread
http://forum.xda-developers.com/showthread.php?t=1113878
then run iconiaroot 1.3
The download is good.
bytemehard said:
Why dont you try the 3.1 Acer_A500_4.010.10_COM_GEN2 from Vache thread
http://forum.xda-developers.com/showthread.php?t=1113878
then run iconiaroot 1.3
The download is good.
Click to expand...
Click to collapse
I'll try it now, dude. Thanks.
I tried what I found here:
http://forum.xda-developers.com/showthread.php?t=1176632
and, after the progress bar go until almost the end, it stopped, so do the gears animation, and after reboot, now I have my device stuck on Acer logo screen and the message, in red letters: boot verified failed ...
Ok..
now then you have to ask..
What browser am i using to download this file.. How am i pushing it to the device.. Does the stock recovery like my sd card..
try downloading to using a diffrent browser / diffrent computer.. try pushing it to a diffrent sd card..
there is something in the above post that is consistant.. im guessing its one of the above i mention above that is your issue..
good luck..
erica_renee said:
Ok..
now then you have to ask..
What browser am i using to download this file.. How am i pushing it to the device.. Does the stock recovery like my sd card..
try downloading to using a diffrent browser / diffrent computer.. try pushing it to a diffrent sd card..
there is something in the above post that is consistant.. im guessing its one of the above i mention above that is your issue..
good luck..
Click to expand...
Click to collapse
Chrome.
And I'm pushing the update.zip with "send to..." right click option on the file.
Unbelievable if it's the issue... ?
alexrb said:
I tried what I found here:
http://forum.xda-developers.com/showthread.php?t=1176632
and, after the progress bar go until almost the end, it stopped, so do the gears animation, and after reboot, now I have my device stuck on Acer logo screen and the message, in red letters: boot verified failed ...
Click to expand...
Click to collapse
The update zips are region specific i believe. That one doesnt look like its for your region. It can get confusing.
bytemehard said:
The update zips are region specific i believe. That one doesnt look like its for your region. It can get confusing.
Click to expand...
Click to collapse
You can be right, but since it's not made here, I suppose any update.zip can be used... or not... but in fact I'm not able to know what's the specific file for Brazilian devices... or can I?
man, it's 1+ month tablet! How could I do that? crying out loud...
Take erica_renee advice......download the zip on your PC. make sure you extract the update.zip. from the file you downloaded. Open update.zip file and make sure it doesnt give an error. Im assuming you can use the same update as north america. I dont follow that too close.
If you have a micro card reader ...pop out the micro sd card and plug it into your PC and copy/past the update.zip to it....then put it back into the tablet and reboot into recovery....
that will at least remove some fault factors.
Edit--instead of extracting the update.zip file from the download you may just have to rename it to update
You got your UID Serial number from the USB? It will be 16 digits long.
If so, use a paperclip and power button to put it into fastboot and then flash it.
TD
bytemehard said:
Take erica_renee advice......download the zip on your PC. make sure you extract the update.zip. from the file you downloaded. Open update.zip file and make sure it doesnt give an error. Im assuming you can use the same update as north america. I dont follow that too close.
If you have a micro card reader ...pop out the micro sd card and plug it into your PC and copy/past the update.zip to it....then put it back into the tablet and reboot into recovery....
that will at least remove some fault factors.
Edit--instead of extracting the update.zip file from the download you may just have to rename it to update
Click to expand...
Click to collapse
mmmm... I renamed it every time I tried that!
I'll try it again...
timmyDean said:
You got your UID Serial number from the USB? It will be 16 digits long.
If so, use a paperclip and power button to put it into fastboot and then flash it.
TD
Click to expand...
Click to collapse
No, dude... I haven't got it...
bytemehard said:
Take erica_renee advice......download the zip on your PC. make sure you extract the update.zip. from the file you downloaded. Open update.zip file and make sure it doesnt give an error. Im assuming you can use the same update as north america. I dont follow that too close.
If you have a micro card reader ...pop out the micro sd card and plug it into your PC and copy/past the update.zip to it....then put it back into the tablet and reboot into recovery....
that will at least remove some fault factors.
Edit--instead of extracting the update.zip file from the download you may just have to rename it to update
Click to expand...
Click to collapse
OOPS YOU ARE Correct . to flash with stock recovery.. only need to extract it to flash with cwm.. But i think its a bad download bad copy or bad sd card issue..
might want to get the md5 sums and check them before on the computer then again on the tablet... after you put the sd card back in the device.. I had this issue with a older 8 gb sd card back when acer first released the tablet..
Again stop trying the exact same thing. change one at a time and you will find your issue.. . AGAIN GOOD LUCK...
bytemehard said:
Take erica_renee advice......download the zip on your PC. make sure you extract the update.zip. from the file you downloaded. Open update.zip file and make sure it doesnt give an error. Im assuming you can use the same update as north america. I dont follow that too close.
If you have a micro card reader ...pop out the micro sd card and plug it into your PC and copy/past the update.zip to it....then put it back into the tablet and reboot into recovery....
that will at least remove some fault factors.
Edit--instead of extracting the update.zip file from the download you may just have to rename it to update
Click to expand...
Click to collapse
I did it. Renamed the file to update.zip, but the yellow exclamation came along briefly...
As the title says, i formatted everything (boot, image etc) and my Phone Huawei U8800 Pro goes in blue screen or Purple Screen when i try to enter the recovery menu. I used to have CWM Recovery 5.0.2.7 and used as stock Rom Gingerbread B512. Can you help me, guide me to bring back in life my phone. Thanks in advance for every help.
avpap said:
As the title says, i formatted everything (boot, image etc) and my Phone Huawei U8800 Pro goes in blue screen or Purple Screen when i try to enter the recovery menu. I used to have CWM Recovery 5.0.2.7 and used as stock Rom Gingerbread B512. Can you help me, guide me to bring back in life my phone. Thanks in advance for every help.
Click to expand...
Click to collapse
Flash official rom or someone can post his cust backup!
do not worry.
creates a dload of ver. B521 with inside the .apk file Update _ 374,402 app_ KB file and put it in the SD. Remove battery plug USB cable and hold down the Vol + and Vol-and power button at the same time. Will upload and eventually will do several restarts
Check to myPhone. I've send you my image folder.
Here you are...
Here is my image folder if you didn' t get it...
it's an executable compressed file
https://docs.google.com/open?id=0BylL_LbM_40RQjBkOGMzUDFpNW8
Thanks guys for the answers. everything is OK now. I Flashed with the Original 2.3.5. B522 and everything is OK now.
Blue screen Problem please help i hv tried all
baggino said:
do not worry.
creates a dload of ver. B521 with inside the .apk file Update _ 374,402 app_ KB file and put it in the SD. Remove battery plug USB cable and hold down the Vol + and Vol-and power button at the same time. Will upload and eventually will do several restarts
Click to expand...
Click to collapse
Dear aal i am very sad, i was using 2.3.5 official update on u8800 x5, then i tried to update 4.0, after installing that was not loading anything and got hang on startup,
then i tried to downgrade to 2.3 official cwm 5 was installed and i format everything, including boot etc, now it only shows blue screen. i can also go to pink screen, but as i connect to pc, it doesnt show and folder or drive so that i can copy dload or image files.
cannot access recovery mod or any type of drive during pink screen. how to solve my problem.
shahbaz9001 said:
Dear aal i am very sad, i was using 2.3.5 official update on u8800 x5, then i tried to update 4.0, after installing that was not loading anything and got hang on startup,
then i tried to downgrade to 2.3 official cwm 5 was installed and i format everything, including boot etc, now it only shows blue screen. i can also go to pink screen, but as i connect to pc, it doesnt show and folder or drive so that i can copy dload or image files.
cannot access recovery mod or any type of drive during pink screen. how to solve my problem.
Click to expand...
Click to collapse
re-install offical firmware
forumber2 said:
re-install offical firmware
Click to expand...
Click to collapse
Thanx dear, but how to install these firmwares, tell me the way.
i cannot access drive or directory of device when connect to pc....
Hey guys.
I have been doing a lot of researches before creating this new thread.
Here is my problem with a Samsung Galaxy s3 I9300T (Australia - Vodafone build). I was given the phone, since it was stuck in a boot loop after a software update issue with Kies (I think from memory 4.2 or something).
The phone boots up, displays the Vodafone logo, and is stuck on the Samsung logo. The phone doesn't restart but stays idle there.
It is impossible to reach the download mode with the use of the 3 buttons, but a USB JIB I bought on ebay does the trick.
Odin recognizes the phone, I can flash a stock Kernel from Samsmobile or root/install the CWM.
BUT, there is no way (so far?) to reach the recovery mode.
I tried to flash a new boot loader, tried to check any physical issue with the buttons, but nothing seems wrong.
I have been looking for tools such a android toolbox/toolkit etc, in the hope one would be able to wipe/flash the nand or even unbrick or whatsoever, from a download mode and not ADB, since I there no fast boot available.
I am ready to try anything, since there's nothing to loose here.
I'm running windows 7 from Parallel desktop.
Thanks mates.
Anthony
tonythrash69 said:
Hey guys.
I have been doing a lot of researches before creating this new thread.
Here is my problem with a Samsung Galaxy s3 I9300T (Australia - Vodafone build). I was given the phone, since it was stuck in a boot loop after a software update issue with Kies (I think from memory 4.2 or something).
The phone boots up, displays the Vodafone logo, and is stuck on the Samsung logo. The phone doesn't restart but stays idle there.
It is impossible to reach the download mode with the use of the 3 buttons, but a USB JIB I bought on ebay does the trick.
Odin recognizes the phone, I can flash a stock Kernel from Samsmobile or root/install the CWM.
BUT, there is no way (so far?) to reach the recovery mode.
I tried to flash a new boot loader, tried to check any physical issue with the buttons, but nothing seems wrong.
I have been looking for tools such a android toolbox/toolkit etc, in the hope one would be able to wipe/flash the nand or even unbrick or whatsoever, from a download mode and not ADB, since I there no fast boot available.
I am ready to try anything, since there's nothing to loose here.
I'm running windows 7 from Parallel desktop.
Thanks mates.
Anthony
Click to expand...
Click to collapse
after flashing newfirmware using download mode+odin the phone cant reboot?have you tried diff version firmware from sammobile .
nainaabd said:
after flashing newfirmware using download mode+odin the phone cant reboot?have you tried diff version firmware from sammobile .
Click to expand...
Click to collapse
I tried 2 different firmware from SAMSmobile, after flashing in Odin, nothing changes. The phone reboots (if the case is ticked) and stays stuck on the samsung logo, after the vodafone splash screen.
tonythrash69 said:
I tried 2 different firmware from SAMSmobile, after flashing in Odin, nothing changes. The phone reboots (if the case is ticked) and stays stuck on the samsung logo, after the vodafone splash screen.
Click to expand...
Click to collapse
maybe something went wrong in partition table during kies upgrade, do you tried a full system reinstall comprensive of pit image?
myabe this get phone back to life but i think you will lose efs.
Well normaly after flashing your right Firmware you should be able to acces recovery...
franco853 said:
maybe something went wrong in partition table during kies upgrade, do you tried a full system reinstall comprensive of pit image?
myabe this get phone back to life but i think you will lose efs.
Click to expand...
Click to collapse
How can I perform what you call a "full system reinstall comprehensive of PIT image"?
I have stock firmware, but no PIT file or CSC or whatsoever.
what do you mean by losing EFS? (encryption ??)
Any help is much appreciated.
tonythrash69 said:
How can I perform what you call a "full system reinstall comprehensive of PIT image"?
I have stock firmware, but no PIT file or CSC or whatsoever.
what do you mean by losing EFS? (encryption ??)
Any help is much appreciated.
Click to expand...
Click to collapse
efs is a system partition wich contains your phone's hardware serial numbers, such as imei, wi-fi mac ecc... losing this means you can't connect to phone network until you restore it(i'm not sure you lose it)
i found this guide here on the forum to restore from brick's or similiar, i think you can try this if normal flashing don't work:
http://forum.xda-developers.com/galaxy-s3/help/solved-pit-bricked-dead-problem-gt-t2535367
When you flash full firmware from Samsung (.tar.md5), it includes things such as bootloader, tz, modem, system, cache, preload and the recovery. Just make sure to download it from site such as sammobile, and you can check yourself if your .tar.md5 you're about to flash includes these things using i.e. 7zip.
Untick "auto reboot" option and flash it. After it's done, it won't auto reboot but Odin will change text to "RESET!", this is a signal for you that it's finished.
Hold on Vol-Up+Home+Power for about 7 seconds, until you see Samsung Galaxy S3 logo. It MUST enter stock recovery you've just flashed, unless your hardware is broken. From there you can select Wipe data / factory reset.
Good luck.
JustArchi said:
When you flash full firmware from Samsung (.tar.md5), it includes things such as bootloader, tz, modem, system, cache, preload and the recovery. Just make sure to download it from site such as sammobile, and you can check yourself if your .tar.md5 you're about to flash includes these things using i.e. 7zip.
Untick "auto reboot" option and flash it. After it's done, it won't auto reboot but Odin will change text to "RESET!", this is a signal for you that it's finished.
Hold on Vol-Up+Home+Power for about 7 seconds, until you see Samsung Galaxy S3 logo. It MUST enter stock recovery you've just flashed, unless your hardware is broken. From there you can select Wipe data / factory reset.
Good luck.
Click to expand...
Click to collapse
Yes this is what I did.
But after "RESET" doing it, holding the buttons won't let me reach the recovery.
Is there a way to access it ? like for instance a USB JIG allowed me to access the DOWNLOAD mode; whereas holding the buttons never let me.
tonythrash69 said:
Yes this is what I did.
But after "RESET" doing it, holding the buttons won't let me reach the recovery.
Is there a way to access it ? like for instance a USB JIG allowed me to access the DOWNLOAD mode; whereas holding the buttons never let me.
Click to expand...
Click to collapse
I don't think so. Probably your buttons are broken then.
JustArchi said:
I don't think so. Probably your buttons are broken then.
Click to expand...
Click to collapse
I still do not understand that NO software is able to address the phone, like the recovery mode does.
We can flash from a computer, how come not to wipe from a computer.
assuming that someone has no screen or broken buttons, i'm sure there's a way to access wipe and/or access the recovery to flash a stock rom.
Thanks
tonythrash69 said:
I still do not understand that NO software is able to address the phone, like the recovery mode does.
We can flash from a computer, how come not to wipe from a computer.
assuming that someone has no screen or broken buttons, i'm sure there's a way to access wipe and/or access the recovery to flash a stock rom.
Thanks
Click to expand...
Click to collapse
do you tried the guide i linked some post ago? the one with the repartition file?
franco853 said:
do you tried the guide i linked some post ago? the one with the repartition file?
Click to expand...
Click to collapse
Hey, yes I tried the link, but again I cannot access the recovery to flash the .zip file.
When I hold the buttons as soon as the logo "galaxy s III GTI9300" appears, the screen goes black and the logo comes back again.
If I release one button, the vodafone splash screen appears, and the boot is stuck on the samsung logo.
I assume, the buttons are working because of what I just explained.
But again, I cannot access the recovery.
Last week, for some reason, after flashing I has a "setup wizard" from appeared, and crashed. that was the only time. I could see the lights under the touch buttons coming on. After the crash, I tried to reinstall and couldn't do it.
I am still sure there should be a way to wipe the nand completely or install from the SD card via the download mode.
Any help is welcome
tonythrash69 said:
Hey, yes I tried the link, but again I cannot access the recovery to flash the .zip file.
When I hold the buttons as soon as the logo "galaxy s III GTI9300" appears, the screen goes black and the logo comes back again.
If I release one button, the vodafone splash screen appears, and the boot is stuck on the samsung logo.
I assume, the buttons are working because of what I just explained.
But again, I cannot access the recovery.
Last week, for some reason, after flashing I has a "setup wizard" from appeared, and crashed. that was the only time. I could see the lights under the touch buttons coming on. After the crash, I tried to reinstall and couldn't do it.
I am still sure there should be a way to wipe the nand completely or install from the SD card via the download mode.
Any help is welcome
Click to expand...
Click to collapse
I get same thing(galaxy s3 logo, black screen then normal boot when try accessing recovery) some time ago after installing philz reco, i flashed another recovery and now runs well, it sounds so strange that you still cant get at least stock recovery after a repartition and a full system reinstall... Maybe something get broke in the hardware...
I followed this guide in order to root my brand new p8lite.
The thing is that now I have a black screen. If I plug my phone via usb, adb shows me that the device is in recovery.
By adb shows me that the device is in recovery I mean this:
Code:
# adb devices
List of devices attached
W3D7N16712000718 recovery
What I did:
Checked the model. It's an ALE-L21
Chapter 1: not a windows user, but managed to get adb up and running on my linux machine.
Chapter 2: everything went fine, bootloader unlocked
Chapter 3: my phone booted up just fine
Chapter 4: skipped it, as my phone was booting fine into system
Chapter 5:
So you want to convert to a single/dual sim?
Click to expand...
Click to collapse
My answer: "no thanks", so I skipped it
Chapter 6: I did the upgrade through OTA BEFORE reading the guide. Double checked I was running 6.0, so I skipped it
Chapter 7: Downloaded the file, flashed trought fastboot. And now I'm here.
I think I may have ****ed up things in the last 3 chapters.
What I tried to fix this:
Code:
# adb reboot bootloader
phone rebooted then huawei logo then blackscreen. adb still shows it's in recovery
After searching in the forum, I came by
Code:
adb reboot-bootloader
(notice the hypen). Firing that command put my phone into fastboot. Couldn't believe it, but I took the chance to flash the files found in chapter 4 (bootloader, recovery, cust and system, in this order). No luck, still reboot, logo, black screen
Now, no matter the presence of the hypen in the command, my phone keeps going into recovery (after the usual reboot, logo, black screen)
Tried to hold down POWER to shut it down. After a while it reboots, logo and black screen again. Laptop keeps saying device is into recovery
Tried to download the official 6.0 update, put on a sd card (dload/UPDATE.APP), held down POWER+VOLUP+VOLDOWN. Again, reboot, logo, black screen. recovery mode, again.
Frustrated, I unplugged the phone. After a while, it rebooted, logo and blackscreen without me touching it. Weird. It did it again a couple of times, but now it has stopped (with a black screen and, if plugged in, adb. says is into recovery)
I really don't know what to do, please help me.
UPDATE:
After leaving a night on its own, the phone was noticeably hot.
Also, when unplugged, if I hold POWER it shows me the logo a couple of time before going black screen.
Ok. But can you enter in recovery?
Another question: you said that u flashed the necessary files. What about flashing directly twrp as recovery, and from twrp make all wipes, and afther that flash from twrp some zip-ped firmwares?
tamaskurti said:
Ok. But can you enter in recovery?
Click to expand...
Click to collapse
Apparently yes (or at least, adb says I'm into recovery). However, I just get a black screen.
Tapping randomly on the screen doesn't give any kind of feedback (no vibration, no beeps, nothing).
tamaskurti said:
Another question: you said that u flashed the necessary files. What about flashing directly twrp as recovery, and from twrp make all wipes, and afther that flash from twrp some zip-ped firmwares?
Click to expand...
Click to collapse
Since I started having those problems after I flashed TWRP, I thought it was a better idea to flash stock recovery (alongside bootloader, cust and system) and restart from there.
I have the same issue...
Have you solved the issue? In case you solved, how?
mmennella said:
I have the same issue...
Have you solved the issue? In case you solved, how?
Click to expand...
Click to collapse
Not yet. I brought the phone to a local repair shop. Tomorrow they should bring it back, hope they have good news
Mmmmmm... I go to buy new One. Huawei must have a way to reflash, but i can't wait. Thanks a lot
Inviato dal mio Redmi 3 utilizzando Tapatalk
S1cK94 said:
Not yet. I brought the phone to a local repair shop. Tomorrow they should bring it back, hope they have good news
Click to expand...
Click to collapse
i brought it to my local repairshop and they sent my phone to manufacters central repair and they fixed it for free.
AfrikanDionysus Solution
Huawei P8 lites are region specific like Middle east asia america etc so before you go in make sure you know your build number in my case ALE-L21C185B560 its the UAE variant now if you've messed go to the huawei website download the rom specific to your region any other region won't work!!! get a clean sd card extract the file and copy it to the root of the sd card its normally an update.app inside a folder named dload shutdown the phone now press vol+ and vol - and the power button till it starts installing.. If you've messed up your recovery and can get to fastboot by plugging in the phone then pressing vol down and power.. use the Huawei extractor tool and extract the recovery from the just downloaded rom and flash it.. then retry the restore as stated.. im sure you can google all the tools you need to get so im not putting any links !!! Ahsante !:good::good::good:
The reason I'm making this thread is because I was trying to root my Honor 8 and things just didn't work out in TWRP. Rebooted my phone and I realized I had bricked it since it would not boot after 10 minutes. Solutions seem to be scattered throughout different threads so here's guide for when you're stuck in a boot loop or you bricked your Honor 8.
What you'll need:
1. The firmware currently you are on. @Coolyou posted a guide for a firmware finder. Here is the post.
2. SD Card
What to do:
Step 1.
Download the correct firmware. It will be a .zip file.
Step 2.
Create a folder called dload in the root of your SD card, not your internal storage. Copy the .zip file the folder and unzip it or unzip it else where and copy the content into the dload folder
Step 3.
Power off Honor 8 (if possible, sometimes it'll auto boot up when forced shutdown)
Step 4.
Make sure your device is not plugged into a computer as it will load into something else.
Hold Vol+ & Vol- & Power. It will being to install the firmware from the dload folder if done correctly. If it instantly fails that means you downloaded the incorrect firmware the device is already one.
You're done! However, if your device does not go past the startup logo within 3 minutes proceed to step 5.
Step 5 is probably necessary as everytime I've bricked my device, I've had to do the next step.
Step 5.
Power off. Hold power and Vol+. Once in Recovery mode (not eRecovery), clear cache and format your device. Once done, reboot.
Ta-da, you're device is now back to normal.
Unfortunately, I cant seem to get to the part where it detects my dload folder and installs from the UPDATE.APP file. My phone keeps auto restarting whenever I try to turn off, and since bootloader is locked, I cant flash any images. Every time I hold down Vol+, Vol-, and power button the phone just vibrates twice and goes to the blue honor boot logo. I have successfully managed to get to the Fastboot menu by holding down Vol- and power button, but this menu is useless as bootloader is locked. Is there anything I can do?
Let go off the power button after the first vibration. Also make sure your phone is not plugged to a pc. With pc connected it boots into eRecovery instead of recovery. Good luck!
Edit:Also the guide does not make it 100% specific but the dload folder on the sd card needs to have the update.app file right inside it. If the structure is sd\dload\folder\update.app it also won't work.
Rakeen70210 said:
Unfortunately, I cant seem to get to the part where it detects my dload folder and installs from the UPDATE.APP file. My phone keeps auto restarting whenever I try to turn off, and since bootloader is locked, I cant flash any images. Every time I hold down Vol+, Vol-, and power button the phone just vibrates twice and goes to the blue honor boot logo. I have successfully managed to get to the Fastboot menu by holding down Vol- and power button, but this menu is useless as bootloader is locked. Is there anything I can do?
Click to expand...
Click to collapse
i have same problem!
i can't reboot in download mode: it vibrates twice and reboot in blue screen always, even leaving power button after first vibration.
How can i fix this?
please help..!
alec_trikki said:
i have same problem!
i can't reboot in download mode: it vibrates twice and reboot in blue screen always, even leaving power button after first vibration.
How can i fix this?
please help..!
Click to expand...
Click to collapse
i have same problem, you can fix this? help me please
Add me to the list, two soft bricked Honor 8's. Once I made the jump to Nougat and installed the Nougat version of TWRP 3.0.1-1, I started having issues. So, I tried to downgrade to FRD-L04C567B150 from FRD-L04C567B320 and had big problems installing B150. Always getting unable to load /data Has to be something to do with the new data structure of Nougat I have a copy of the full stock rom of B150 and B162 and have wiped the phone. I am trying to dload full B150 from SDcard but will fail immediately and says Wrong Version. I can get to fastboot and ADB. I also tried custom ROMs but that wont work because they need the basic Nougat structure to work from. I don't have a clue how to proceed seeing that I can't even wipe the phone and install a Full stock ROM B150 or B162??
Any help would be extremely appreciated.
thekubiaks said:
Add me to the list, two soft bricked Honor 8's. Once I made the jump to Nougat and installed the Nougat version of TWRP 3.0.1-1, I started having issues. So, I tried to downgrade to FRD-L04C567B150 from FRD-L04C567B320 and had big problems installing B150. Always getting unable to load /data Has to be something to do with the new data structure of Nougat I have a copy of the full stock rom of B150 and B162 and have wiped the phone. I am trying to dload full B150 from SDcard but will fail immediately and says Wrong Version. I can get to fastboot and ADB. I also tried custom ROMs but that wont work because they need the basic Nougat structure to work from. I don't have a clue how to proceed seeing that I can't even wipe the phone and install a Full stock ROM B150 or B162??
Any help would be extremely appreciated.
Click to expand...
Click to collapse
UPDATE : It freaking worked!!! After an entire weekend of hair pulling and going way deep into Nougat and MM trying to find the cause, it was a simple Full ROM B162 that I dloaded and three fingered from the SD card (of course it has to be the exact ROM for your phone such as FRD-L04C567B###). WOW, two phones are back. I'll stay at FRD-L04C567B162 and like it.
Lesson Learned: When you try to do an eRecovery and the Honor 8 starts downloading new firmware from the internet it creates a new folder on the sd card called something like HwOC. In that folder is stored the new firmware that erecover plans to use on the recovery. IF this HwOC folder is present and you try to do a Full ROM three finger install with the B150 or B162 firmware in the dload folder, the recovery will stop and say something like invalid version. To fix, remove the HwOC folder so that only dload is present, now do the three finger start and the firmware will install without error. Worked twice for me.
Hi, my device is still not booting up after installing the matching dload firmware on my device from the honor 8 website (FRD-L09).
Is there still anything I can do to maybe get this fixed?
I created a nandroid backup of all partitions that I were able to back up, but even rolling back all partitions did not make it boot again.
Sadly, I am not able to get the device into e.g. fastboot mode anymore because it is not booting anymore and therefore cant get an adb shell on it.
I can still enter recovery mode, but when trying to boot it just stays at the blue screen with the white "honor" text after the short boot animation with the 3d text
Hi,
my phone keeps entering eRecovery and my PC does not recognize it so please how can I access it to install files. I think I have installed a wrong boot.img and recovery.img version of firmware.
Please I need help.
Thanks
Lorog said:
Hi,
my phone keeps entering eRecovery and my PC does not recognize it so please how can I access it to install files. I think I have installed a wrong boot.img and recovery.img version of firmware.
Please I need help.
Thanks
Click to expand...
Click to collapse
Same here on a Note 8 did you find a solution?
thekubiaks said:
UPDATE : It freaking worked!!! After an entire weekend of hair pulling and going way deep into Nougat and MM trying to find the cause, it was a simple Full ROM B162 that I dloaded and three fingered from the SD card (of course it has to be the exact ROM for your phone such as FRD-L04C567B###). WOW, two phones are back. I'll stay at FRD-L04C567B162 and like it.
Lesson Learned: When you try to do an eRecovery and the Honor 8 starts downloading new firmware from the internet it creates a new folder on the sd card called something like HwOC. In that folder is stored the new firmware that erecover plans to use on the recovery. IF this HwOC folder is present and you try to do a Full ROM three finger install with the B150 or B162 firmware in the dload folder, the recovery will stop and say something like invalid version. To fix, remove the HwOC folder so that only dload is present, now do the three finger start and the firmware will install without error. Worked twice for me.
Click to expand...
Click to collapse
Do you have the link for the b162 full firmware?
edit:
also what recovery did you have installed when you did this?
nickp22127 said:
Do you have the link for the b162 full firmware?
edit:
also what recovery did you have installed when you did this?
Click to expand...
Click to collapse
Its erecovery
tiagoesbastos said:
i have same problem, you can fix this? help me please
Click to expand...
Click to collapse
i have the same pblm...how did u both managed to boot it then??
---------- Post added at 11:46 AM ---------- Previous post was at 11:45 AM ----------
alec_trikki said:
i have same problem!
i can't reboot in download mode: it vibrates twice and reboot in blue screen always, even leaving power button after first vibration.
How can i fix this?
please help..!
Click to expand...
Click to collapse
tiagoesbastos said:
i have same problem, you can fix this? help me please
Click to expand...
Click to collapse
i have the same pblm...can u tell how did u managed to solve it???
oops, wrong thread
abbassbhai said:
i have the same pblm...how did u both managed to boot it then??
---------- Post added at 11:46 AM ---------- Previous post was at 11:45 AM ----------
i have the same pblm...can u tell how did u managed to solve it???
Click to expand...
Click to collapse
Do you find a solution? I have the same problem!
Rakeen70210 said:
Unfortunately, I cant seem to get to the part where it detects my dload folder and installs from the UPDATE.APP file. My phone keeps auto restarting whenever I try to turn off, and since bootloader is locked, I cant flash any images. Every time I hold down Vol+, Vol-, and power button the phone just vibrates twice and goes to the blue honor boot logo. I have successfully managed to get to the Fastboot menu by holding down Vol- and power button, but this menu is useless as bootloader is locked. Is there anything I can do?
Click to expand...
Click to collapse
Did you find a solution? I have the same problem!
Rakeen70210 said:
Unfortunately, I cant seem to get to the part where it detects my dload folder and installs from the UPDATE.APP file. My phone keeps auto restarting whenever I try to turn off, and since bootloader is locked, I cant flash any images. Every time I hold down Vol+, Vol-, and power button the phone just vibrates twice and goes to the blue honor boot logo. I have successfully managed to get to the Fastboot menu by holding down Vol- and power button, but this menu is useless as bootloader is locked. Is there anything I can do?
Click to expand...
Click to collapse
Hi, I have the exact same problem. Have you managed to fix it?
Same problems as other people above, couldn't load any recovery. Anyone can help us out?
Rakeen70210 said:
Unfortunately, I cant seem to get to the part where it detects my dload folder and installs from the UPDATE.APP file. My phone keeps auto restarting whenever I try to turn off, and since bootloader is locked, I cant flash any images. Every time I hold down Vol+, Vol-, and power button the phone just vibrates twice and goes to the blue honor boot logo. I have successfully managed to get to the Fastboot menu by holding down Vol- and power button, but this menu is useless as bootloader is locked. Is there anything I can do?
Click to expand...
Click to collapse
Hi even I have the same problem with Honor 8 Pro.. Did you get any solution??
Hi even I have the same problem with Honor 8 Did you get any solution??