Hello,
Please find to the link below the kernel modules for CIFS (Samba) matching to FireTV Stick 5.2.0.1 Kernel (3.0.31+ SMP preempt mod_unload ARMv7 p2v8).
Here dl.free.fr/ms4R6RmI5
cifs.ko
md4.ko
nls_utf8.ko
Any question, don't hesitate,
Christian
Is "cifs" line exist in output for command 'cat /proc/filesystems'?
On Fire TV 2Gen unfortunately no
Kramar111 said:
Is "cifs" line exist in output for command 'cat /proc/filesystems'?
On Fire TV 2Gen unfortunately no
Click to expand...
Click to collapse
Yes it is. "Nodev cifs"
Great!
Did you compile them on your own?
Greetings by Idijt
Files missing
file no longer exist?
anybody still have and can share?
Related
I have searched high and low for a tun.ko module for a rooted Android 3.1 Motorola Xoom.
I have tried to load tun.ko modules from Android 3.0 releases without success.
I am getting "(Exec format error)" errors while using insmod.
Can someone help me here? I want to get OpenVPN working and have been unsuccessful so far.
Thanks,
Eric
I compiled the module for 3.1, you will find it here:
hxxp://devil.homelinux.org/xoom/
greets,
Olli
Hi Olli,
I tried this tun.ko for the Galaxy tab 10.1 - 3.1.
I still get "Exec format error". Is that suppose to work on my device?
Thanks a lot.
@yochaizv
Did you read my small info on the website?
Your kernel version *must* match the module version.
Otherwise the kernel refuses to load the module and
you get the format error.
My module was compiled for the Motorola xoom.
It's very likely that your kernel is different.
Olli
Hi all,
Does any body have compile module tun.ko for samsung galaxy tab 10.1 with kernel version 2.6.36.3? i have same problem with olli.... Can't find correct module for my device. Please help and i will really appreciate it.
Thanks
Ali
Upss i mean same with yochaizv...maybe olli can help us... Thanks
Ali
ol_li said:
I compiled the module for 3.1, you will find it here:
hxxp://devil.homelinux.org/xoom/
greets,
Olli
Click to expand...
Click to collapse
i cannot find a working tun.ko for my xoom,
uname tells me:
Code:
# busybox uname -a
Linux localhost 2.6.36.3-00010-g3139c20 #1 SMP PREEMPT Fri Jul 8 06:11:47 CDT 2011 armv7l GNU/Linux
any help is really appreciate.. i do need openvpn to work.. thank you
noob question what is tun.ko, and wwan?
Can anyone compile nls_utf8.ko module for the Retail 10.1?
The Settings -> About tablet tab has the following:
Kernel - 2.6.36.3 se.infra sep-58 #1
Build Number - HMJ37.UEKF3 P7510UEKF3
Don't know if it's important for this module but for cifs.ko was the following:
cifs: version magic should be '2.6.36.3 SMP preempt mod_unload ARMv7 '
Ok, I did it myself. Here is nls_utf8.ko for the retail 10.1. Works for me.
Trying to set this up myself. I've got cifs working but not utf8 support. Your nls_utf8.ko does not seem to work for me. I've got:
Kernel: 2.6.36.3 [email protected] #1
Build number: HMJ37 P7500XWKHD
Do I need to change kernel for this to work or is there another file available for this kernel?
I don't think you need to change your kernel. If you can find the source for it - you can compile the module. The description of how to compile is somewhere on this forum (don't remember where exactly). Though first you should check this module: try mount manager and force loading of modules in it - this helps...
i need utf8 for cifs too, so i tested nls_utf8.ko in this thread but doesn't work for me.
I haven't problem with cifs.ko, it's works always but without utf8 support so,
how do i can test if my kernel able to support utf8?
how do i can know if i can add a module of nls_utf8 or i need recompiling kernel?
thanks in advance
gt-p7510 with ics stock rooted and A1 Kernel 1.5.9SE
Hey all,
I got tun.ko compiled for Samsung Galaxy Ace, which is required for using vpn clients.
Its for 2.6.32.9-perf kernel, on FroYo.
Vishal
Edit:! Attaching tun.ko compiled for Gingerbread (India Release)
>$ modinfo tun.ko
filename: tun.ko
alias: devname:net/tun
alias: char-major-10-200
license: GPL
author: (C) 1999-2004 Max Krasnyansky <[email protected]>
description: Universal TUN/TAP device driver
depends:
vermagic: 2.6.35.7-perf-CL518855 preempt mod_unload ARMv6
How to install it?
I just should put tun.ko in /lib/modules and reboot the phone ?
you can do "insmod tun.ko" to load it from adb shell (or if you have terminal emulator app installed on your phone).
please...
could somebody make it for Galaxy GIO GingerBread too
kernel 2.6.35.7 cl412483
I have Acer Iconia Tab A500 with last rooted firmware [fguy] (Android 3.2, kernel 2.6.36.3+, Acer_A500_7.006.03_COM_GEN1). I try use tun.ko from thread [DEV] A500 Kernel Modules modules - k2.6.36.3.zip for kernel 2.6.36.3 But this module requires kernel 2.6.36.3. Where find tun.ko for 2.6.36.3+
Message from dmesg:
tun: version magic '2.6.36.3 SMP preempt mod_unload ARMv7 ' should be '2.6.36.3+ SMP preempt mod_unload ARMv7 '
Click to expand...
Click to collapse
Goto the market and download tun.ko Installer. It had a valid one for mine... Do the others work? Im trying to get fuse.ko and one of the mounters to mount mine...
--X
TomskDiver said:
I have Acer Iconia Tab A500 with last rooted firmware [fguy] (Android 3.2, kernel 2.6.36.3+, Acer_A500_7.006.03_COM_GEN1). I try use tun.ko from thread [DEV] A500 Kernel Modules modules - k2.6.36.3.zip for kernel 2.6.36.3 But this module requires kernel 2.6.36.3. Where find tun.ko for 2.6.36.3+
Message from dmesg:
Click to expand...
Click to collapse
Check out this thread ... I'm using the modules from it successfully in 3.2 and 3.2.1.
http://forum.xda-developers.com/showthread.php?t=1297620
UPDATE: These modules were added by request to Hundsbuah's kernel here:
http://forum.xda-developers.com/showthread.php?t=2246062
______________________________________________________________________
I was not going to post this because it has limited use for most TF300T owners but it can't hurt so here it is. The attached file(ath9k.tar.gz) contains kernel modules needed to get AR9271 based usb wifi dongles working on the latest stock TF300T kernel(Asus build 10.4.2.20, kernel version 3.1.10). I have tested the modules with this dongle: TP-Link TL-WN722N.
Uncompress the file and you will get an ath9k directory. Inside are the modules, 2 scripts for easy loading and unloading of the modules, and iwconfig compiled for Android. Getting the dongle working goes something like this:
Su to root. Copy htc_9271.hw to /system/etc/firmware. Run the scripts start_ath9k and stop_ath9k to load and unload the modules.
After the modules are loaded, insert the dongle into the keyboard full size usb port and run ifconfig and iwconfig as needed. If wlan0(default android wifi) is on then iwconfig will show the dongle as wlan1.
Note: I did not post this on the Dev forum because I did not develop these modules...I only changed a few lines in 2 modules before compiling them.
ath9k
I have one mtech atab7t tablet with 4.0.4 android(rooted) and 3.0.8+ kernel [email protected] can i add the driver somehow?
kerteszalex said:
I have one mtech atab7t tablet with 4.0.4 android(rooted) and 3.0.8+ kernel [email protected] can i add the driver somehow?
Click to expand...
Click to collapse
Not very likely...you would need to get your kernel source, add ath9k driver support to the kernel config, then fix any compile errors.
bads3ctor said:
Not very likely...you would need to get your kernel source, add ath9k driver support to the kernel config, then fix any compile errors.
Click to expand...
Click to collapse
you can able to make a tutor for me? i am new in these things :/
kerteszalex said:
you can able to make a tutor for me? i am new in these things :/
Click to expand...
Click to collapse
Hmmm...kernel module compiling in 1 easy lesson....not sure it's possible.
bads3ctor said:
Hmmm...kernel module compiling in 1 easy lesson....not sure it's possible.
Click to expand...
Click to collapse
I really need this usb wifi support for my tab :/ i purchased recently more powerful antennas for my router but this tablet lost the signal on the next room :/ sorry for my bad english
kerteszalex said:
I really need this usb wifi support for my tab :/ i purchased recently more powerful antennas for my router but this tablet lost the signal on the next room :/ sorry for my bad english
Click to expand...
Click to collapse
You need the kernel source for your tablet and a way to root your tablet. I did a cursory Google search for the kernel source for your tablet and I can't find it. If you can get the kernel source code for your tablet then it might be possible to compile ath9k modules. If you can't root that tablet then kernel modules won't be useful because there would be no way to load them.
bads3ctor said:
You need the kernel source for your tablet and a way to root your tablet. I did a cursory Google search for the kernel source for your tablet and I can't find it. If you can get the kernel source code for your tablet then it might be possible to compile ath9k modules. If you can't root that tablet then kernel modules won't be useful because there would be no way to load them.
Click to expand...
Click to collapse
the tablet comes with root.i can extract the kernel from it?
kerteszalex said:
the tablet comes with root.i can extract the kernel from it?
Click to expand...
Click to collapse
You need the kernel source code from the tablet manufacturer.
Hello! I have source code for my kernel (Nexus 7 4.2.2) and I successful built module cifs.ko and cp210x.ko, but i can't build module ath9_htc. I add in my nexus_defconfig file
CONFIG_ATH_COMMON=m
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K_HTC=m
but after make modules command only atk.ko created.
Sorry for my english.
SpulN said:
Hello! I have source code for my kernel (Nexus 7 4.2.2) and I successful built module cifs.ko and cp210x.ko, but i can't build module ath9_htc. I add in my nexus_defconfig file
CONFIG_ATH_COMMON=m
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K_HTC=m
but after make modules command only atk.ko created.
Sorry for my english.
Click to expand...
Click to collapse
I had to comment out a few lines of code in 2 modules to get mine to compile. On the TF300T, it has to do with LED code not present in the stock kernel that is referred to in 2 of the modules. If you use my modules on the TF300T, you will get no LED blinking on the WIFI stick when data is transmitted or received.
EDIT: Newegg has an Atheros AR9271 USB stick for $9.99 with a cradle.
http://www.newegg.com/Product/Product.aspx?Item=N82E16833166068
For anyone wondering what these modules are used for, read this:
http://forum.xda-developers.com/showthread.php?t=1714300
HELP!! Need Kernel Module ath9k for GT-N5110 Galaxy Note 8.0
HELP !!!
Could really use some help. For the life of me I can't compile a kernel module driver ath9k for my USB wireless adapter TL-WN722N. So it can be used by insmod on my rooted Galaxy Note 8.0 GT-N5110 on Kernel 3.0.31 Build BMC9 running android 4.1.2. The source code is available at opensource.samsung. and is listed as the GT-N5110 NA (north america) model. If some one could help me please? I would be forever in your debt... :good:
Hello
When trying to add modules via your script, it gives me an "exec format error" for each module. How can this be fixed?
Device: Asus Padfone A66, Android 4.1.1
hi I am getting some problem with this attach file, i decompressed it and got the directory. but what are the next stapes ? sorry but i am not getting that part to copy to system/etc/firmware. will u make clear the process stapewise?
Sorry for bothering this old thread. I'm trying to get this to work on my OnePlus 3 running Oxygen OS Nougat. I installed Linux on my phone and I would like to install the TP-LINK drivers on it as the inbuilt WiFi module on my phone does not support monitor mode. I connected this WiFi adapter and trying to get it to work. Please help.